Académique Documents
Professionnel Documents
Culture Documents
www.thenavalarch.com
Welcome to the Wageningen B-series Propeller designer spreadsheet
This Excel sheet helps you calculate the propeller particulars from Wageningen B-series data
****IMPORTANT : To Run this application, you need to enable the Solver Add-In of Excel. Please to see steps ---> How to Enable Solver Add-In
In the 'Calculation Methods' excel sheet, there are three options. Choose either of them.
Once all inputs provided and a calculation method selected, the propeller particulars are calculated and displayed in the 'Outputs' worksheet
Limitations
1. This application is limited to design of Wageningen B-series propellers
References
1. Principles of Naval Architecture, Part 2, Edward V. Lewis
Step 1: Go to Excel Options Step 2: Select Add-Ins from the left Menu
Step 3: Go to 'Manage' at bottom of the page, select 'Excel Add-Ins' and click 'OK' Step 4: Check the checkbox for the 'Solver' Add-In and click 'OK'
Wageningen B-Series Propeller Designer
Step 5: If even after doing the above exercise, Excel doesn't recognize Solver then click on the 'Developer' tab -> View Code. If Developer tab is not visible, you can enable it from Excel Options
In the resulting window, click on Tools - > References. Check in the list of references, and make sure SOLVER is checked
Inputs
Propeller Details
Description Symbol Value Unit
Vessel Velocity (Knots) - 17.5 knots
Go to Calculation
Note: 1 HP = 0.7457 KW
Please select one of the following calculation methods:
Change only propeller speed (n) Change propeller Pitch/Diameter ratio (P/D) and Change only propeller Diameter (D)
propeller speed (n)