Académique Documents
Professionnel Documents
Culture Documents
KK 110
Das Ganze ist mehr als die Summe seiner Teile. Und weil das so ist, bekommen Sie bei ALFATEC
nicht nur die passenden Komponenten für Ihre Konstruktion, sondern auch eine urteilssichere,
erfahrene Beratung. Denn wir lassen Sie nicht allein, sollten Fragen auftreten. Außer den beliebten
Klassikern wie der TIGER-Rolle oder der MAMMUT-Rolle finden Sie bei uns alles, was nötig ist, um in
Bewegung zu kommen: eine Vielzahl an Führungsprofilen und -einheiten, Wälzlagern, Gabelzinken,
Befestigungselementen … Alles ist vorrätig, alles ist schnell lieferbar – innerhalb von maximal 48 Stunden.
Ganz oder gar nicht? Nicht
tiger Qualität.
kkomponenten
omponenten
Technische
Auslegung
NEU X tra-Strong
Technical | |
Characteristics
NEU 59 • X tra-Strong
| |
NEU 62 • X tra-Strong
44 • fest | |
Tigerrollen fixed Tigerrolle justierbar
46 • justierbar Tiger bearing
Tiger bearings adjustable
adjustable
Profile 64 • | X| tra-Strong
48 • justierbar NEU
10 • fest
fixed
mit Exzenter Profiles Tigerrolle radial
adjustable with Tiger bearing
12 • justierbar excenter radial
36 • U-Führungsprofile
adjustable 66 • | X| tra-Strong
50 • mit Oilamidzapfen U guiding profiles NEU
14 • justierbar with oilamide tap Schwerlast-
38 • I-Führungsprofile
mit Exzenter Tigerrolle
52 • radial I guiding profiles
adjustable with Tiger bearing
radial
excenter NEU 40 • mit Befestigungs- heavy duty
gewinden
16 • mit Oilamidzapfen 68 • | X| tra-Strong
with threaded holes NEU
with oilamide tap Schwerlast-
NEU 42 • Profile gebogen Führungseinheit
NEU 18 • mit Messingzapfen profiles bent
with brass tap Heavy duty
54 • Präzisions- guiding unit
20 • radial
Führungsprofile
radial NEU 68 • X tra-Strong
| |
Precision guiding
22 • mit Schraubbolzen Führungsprofile
profiles
with threaded bolt Guiding profiles
NEU 56 • Präzisions-
NEU 28 • mit Anschraubbolzen Führungsprofile
with threaded bolt mit Befestigungs-
gewinden
NEU 32 • Schwerlast
Heavy duty Precision guiding
profiles with threaded
NEU 34 • Schwerlast-Führungs- holes
einheit
Heavy duty guideway 79 • Klemmkonsole
unit Clamp console
78 • hochtemperatur NEU 58 • Mammut-Profile
high temperature Mammut profiles
NEU 72 • Mammut-Rollen
Mammut bearings
4
ALFA-speed
NEU
89 • Vulkollanbeschichtete
Rollen
Edelstahl Vulcollan coated bearings
stainless steel
92 • Tigerrolle
Tiger bearing
94 • Befestigungselemente
Flange plates
96 • Tigerrolleneinheit
NEU
Tiger bearing unit
97 • Führungsprofile
Guiding profiles Stützrollen
Gabelzinken
Supporting roller
Befestigungs-
forks
elemente
Flange plates
104 • Stützrollen
Supporting roller
81 • Führungseinheiten
106 • Gabelzinken
Guideway units
Forks
84 • Befestigungselemente
107 • Gabelträger
quadratisch
Flange plates square Fork carriages
88 • Befestigungselemente
rechteckig
Flange plates rectangular
90 • Befestigungswinkel
Flange angle
NEU 86 • Mammut-
Befestigungselemente
Mammut flange plates
i n h a lt
5
Befestigungselemente Profile Führungseinheiten
6
Technische Beschreibung der Wälzlager
Toleranzen: Die in diesem Katalog aufgeführten Zylinderrollenlager sind nach DIN 620 g
efertigt.
Toleranzklasse PN (PO), Tragzahlfaktoren nach ISO 76 und 281/1.
Betriebstemperatur: Allgemein von - 40 °C bis +120 °C, kurzfristig bis +150 °C einsetzbar. Hochtemperaturlager bis +250 °C.
Technical Characteristics
Tolerances: The bearings specified in this catalog are manufactured according to DIN 620, class PN (PO),
values load capacity are according to ISO 76 and 281/1.
Materials: Outher rings Case-hardened steel 20CrMnTi, surface hardened at 62-2 HRC.
Inner rings Bearing steel UNI 100Cr6, hardened at 62-2 HRC.
Welding bolts S355 J2G3, easy weldable, bolt diameter range of tolerance 0 / -0,05 mm.
Service temperature: Generally from - 40 °C to +120 °C, for short time usable to +150 °C, high temperature bearings to +250 °C.
Schmieranweisung
Inbetriebnahme: Vor Beginn müssen die Laufflächen der Führungsprofile mit Fett bestrichen werden.
Schmiermittel: Die Wälzlager sind in der Standard-Ausführung mit Lithium-Schmierfett, Grad 3, befettet.
Order of lubrication
Beginning of operation: The guideway profiles have to be greased carefully on the contact surface before use.
Lubricant: Standard bearings are lubricated with lithium-grease, grade 3.
7
Technische Auslegung
Technical dimensioning
QxL
A = --------------------------------- [N]
RA x 2
Q QxL
B = A + -------- [N] A = B = ---------------------------------- [N]
2 RA x 2
Attention:
In Order to avoid damage to
FA the profiles, a high
loading pressure should not
be exceeded by
FR 860 N/mm².
8
Baugröße Außen-Ø Traglast Traglast U-Führungs- I-Führungs-
radial axial profile profile
type outher-Ø load capacity load capacity U-Profiles I-Profiles
radial axial
FR [kN] FA [kN] Nb Nb
050 52,5 5,30 2,00 050.0726
Achtung: Die Tragzahlen in dieser Tabelle sind über die Hertz’sche Pressung, Rolle/Profil berechnet.
Bei Geschwindigkeiten > 10 m/min Sicherheitsfaktor berücksichtigen.
Attention: In this table the load capacity is calculated by the hertzian pressure.
Driving speed > 10 m/min use safety factor.
| X|
tra-Strong Führungsprofil und Tigerrolle
mit rund 60 % höherer Lastaufnahme finden Sie ab Seite 58.
| X|
tra-Strong profiles and tiger bearing
with approx. 60 % higher load capacity starting from page 58.
9
TR - - -.0200
Tigerrolle
kombiniert – fest
Ausführung: 2 RS
Die Tigerrollen sind
lebensdauergeschmiert.
Ab Baugröße 070 haben
die Tigerrollen ein M6
Gewinde für Schmier-
nippel, um ein Nach-
schmieren zu ermöglichen.
Tiger bearing
combined – fixed
Design: 2 RS
The tiger bearing are
lubricated for lifetime.
Starting from size 070
the tiger bearings have a
thread M6 for lubrication
cups for relubrication.
TR 180 .0200 180 100 95,7 57,3 12,5 76,3 19,4 124 60 76,00 23,00
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
10
UP - - -.0700 Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 36.
You can find the fitting profiles in Nb quality starting
from page 36.
Indication:
151 102 68 71 UP 150.0700
Technical dimensioning bea-
ring/profile, with consideration
207 243 73 83 UP 180.0700
of hertzian pressure FR and FA.
11
TR - - -.0300
Tigerrolle
kombiniert – Justage
über Distanzringe
Ausführung: 2 RS
Tiger bearing
combined – adjustable
with insert washer
Design: 2 RS
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
12
UP - - -.0700 Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 36.
You can find the fitting profiles in Nb quality starting
from page 36.
48 56,8 14 14 IP 080.0800
Hinweis:
68 72 15 15 UP 090.0700 IP 090.0800
Technische Auslegung Rolle/
81 95 31 36 UP 110.0700 IP 110.0800 Profil, unter Berücksichtigung
der Hertz’schen Pressung
81 95 31 36 IP 110.0800 FR und FA.
13
TR - - -.0350
Tigerrrolle
kombiniert – Justage der
Axialrolle über Exzenter
Ausführung: 2 RS
Tiger bearing
combined – adjustable
with excenter
Design: 2 RS
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
14
UP - - -.0700 Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 36.
You can find the fitting profiles in Nb quality starting
from page 36.
15
TR - - -.0360
Tigerrolle
kombiniert – justierbar
mit Oilamidzapfen
Ausführung: 2 RS
Tiger bearing
combined – adjustable
with oilamide tap
Design: 2 RS
Bestell-Nummer D d H B A L T FR FA
Baugröße mm mm mm mm mm mm mm kN kN
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
16
UP - - -.0700 Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 36.
You can find the fitting profiles in Nb quality starting
from page 36.
17
TR - - -.0368
Tigerrolle
kombiniert – justierbar
mit Messingzapfen
Ausführung: Axial
statisch hoch belastbar
Die Tigerrollen sind
lebensdauergeschmiert
jedoch optional nach-
schmierbar.
Tiger bearing
combined – adjustable
with brass-tap
Design: Axial highly
stressable
The tiger bearings are
lubricated for lifetime
however optional
relubricable.
Bestell-Nummer D d H B L T FR FA
Baugröße mm mm mm mm mm mm kN kN
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
18
UP - - -.0700 Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 36.
You can find the fitting profiles in Nb quality starting
from page 36.
19
TR - - -.0400
Tigerrolle
kombiniert – radial
Ausführung: 2 RS
Die Tigerrollen sind
lebensdauergeschmiert.
Ab Baugröße 070 haben
die Tigerrollen ein M6
Gewinde für Schmier-
nippel, um ein Nach-
schmieren zu ermöglichen.
Tiger bearing
combined – radial
Design: 2 RS
The tiger bearing are
lubricated for lifetime.
Starting from size 070
the tiger bearings have a
thread M6 for lubrication
cups for relubrication.
TR 180 .0400 180 100 89,7 57,3 12,5 76,3 19,4 124 76,00
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
20
UP - - -.0700 Deutsch. Ut nimFührungsprofile
Die passenden do eugait ullan in
volum nos. Ut finden
Nb-Qualität
nim doSeite
Sie ab eugait
36.ullan volum nos.
Englisch. Ut nim
You can find the do eugait
fitting ullaninvolum
profiles nos. Ut
Nb quality nim
starting
do eugait
from pageullan
36. volum nos.
21
TR - - -.1300
Tigerrolle
mit Schraubbolzen –
justierbar
Ausführung: 2 RS
Die Tigerrollen sind
lebensdauergeschmiert.
M
Tiger bearing N
with threaded bolt –
adjustable
Design: 2 RS
The tiger bearing are
lubricated for lifetime.
Bestell-Nummer D dh6 G L H O K B A T M N P FR FA
für Passfeder
Baugröße mm mm mm mm mm mm mm mm mm mm mm mm DIN 6885 kN kN
TR 060 .1300
62,5 24 M 24 x 1,5 33 95 62 42 20 5,5 42 10 12 8 x 7 x 16 8,87 2,95
TR 070 .1300
70,1 24 M 24 x 1,5 40 102 62 42 23 6,5 48 10 12 8 x 7 x 16 11,40 3,15
TR 080 .1300
77,7 30 M 30 x 1,5 39,5 119,5 80 50 23 7 54 12 14 8 x 7 x 16 12,87 5,00
TR 090 .1300
88,4 30 M 30 x 1,5 48 128 80 50 30 7 59 12 14 8 x 7 x 16 20,37 5,10
TR 110 .1300
107,7 42 M 42 x 1,5 55 154,5 99,5 69,5 31 8 71 16 18 12 x 8 x 18 24,06 8,90
TR 120 .1300
123 42 M 42 x 1,5 59,5 159 99,5 69,5 37 8 80 16 18 12 x 8 x 18 33,44 9,80
TR 150 149
.1300 48 M 48 x 2,0 69 181 112 80 43 15 103 18 20 14 x 9 x 30 51,94 17,40
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
22
UP - - -.0700 Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 36.
You can find the fitting profiles in Nb quality starting
from page 36.
23
TR - - -.1360
TR - - -.1360
Tigerrolle
mit Schraubbolzen und
Oilamidzapfen – justierbar G/d
Ausführung: 2 RS lebens-
dauergeschmiert.
Tiger bearing M
with threaded bolt and
oilamide tap – adjustable
N
Design: 2 RS lubricated for
lifetime.
Bestell-Nummer D Ddh6 dG H L H
B OG K L B FA T T M R N FFRR FAFA
Baugröße mm mm
mm mm
mm mm
mm mm
mm mm
mm mm mmmm mm
mm mm
mm mm mmmm kN
kN kNkN
TR 060
050 .1360 62,5 24 M 24 x 1,5 33 95 62 42 20 5,5 42 10 12 8,87
5,30 2,95
2,00
TR 070
060 .1360 70,1 24 M 24 x 1,5 40 102 62 42 23 6,5 48 10 12 11,40
8,87 3,15
2,95
TR 080
070 .1360 77,7 30 M 30 x 1,5 39,5 119,5 80 50 23 7 54 12 14 12,87
11,40 5,00
3,15
TR 090
080 .1360 88,4 30 M 30 x 1,5 48 128 80 50 30 7 59 12 14 20,37
12,87 5,10
5,00
110
TR 090 .1360 107,7 42 M 42 x 1,5 55 154,5 99,5 69,5 31 8 71 16 18 24,06
20,37 8,90
5,10
120
TR 110 .1360 123 42 M 42 x 1,5 59,5 159 99,5 69,5 37 8 80 16 18 33,44
24,06 9,80
8,90
TR 120
150 .1360 149 48 M 48 x 2,0 62 181 112 80 43 8 103 18 20 33,44
51,94 9,80
17,40
C TR
= 150
Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity
51,94radial bearing
17,40
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
24
UP - - -.0700 Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 36.
You can find the fitting profiles in Nb quality starting
from page 36.
bw - - -.1200
C C C0 C0 Ca Ca C0a Führungsprofile
C0a Führungsprofile Bestellbeispiel
Bestellbeispiel / Order example:
/ Order example: Sonderausführungen:
kN kN kN kN kN kN kN kN
U-Profil U-Profil I-Profil I-Profil
TR 090.1360TR 090.0200 tor des Max-Planck-Insti-
Tigerrolle Tigerrolle, kombiniert
mit Schraubbolzen - fest,
und tuts in Irgendwo. Aadio-
31 35,5 8 8 UP 060.0700 IP 060.0800 Ø 88,4 mm
Oilamidzapfen num modiamet praesto od
Ø 88,4 mm eraesse blamet wis augueriu-
45,5 51 8 8 UP 070.0700 IP 070.0800 re Lore dolesectemIduissi..
Hinweis:
48 56,8 14 14 UP 080.0700 IP 080.0800
Technische Auslegung Rolle/ Empfehlung
Hinweis:
Profil, unter Berücksichtigung Sonderausführungen in
68 72 15 15 UP 090.0700 IP 090.0800
der Hertz’schen Pressung
Technische Auslegung Rolle/
englisch:
Mutter DIN 439
FR und FA. Profil, unter Berücksichtigung torverwenden.
des Max-Planck-Insti-
81 95 31 36 UP 110.0700 IP 110.0800 tuts in Irgendwo. Aadio-
der Hertz’schen Pressung
Indication:FR und FA.
num modiamet praesto od
110 132 31 36 UP 120.0700 IP 120.0800 eraesse blamet wis augueriu-
Technical dimensioning bea- Recommendation
Indication:
ring/profile, with consideration re Lore dolesectemIduissi.
151 192 68 71 UP 150.0700
of hertzianTechnical
pressuredimensioning
FR and FA. bea- Use screw nut DIN 439.
ring/profile, with consideration
of hertzian pressure FR and FA.
25
TR - - -.1360 E
TR - - -.1360
Tigerrolle
mit Schraubbolzen und
Exzenterring – justierbar
Ausführung: 2 RS lebens-
dauergeschmiert.
Tiger bearing M
with threaded bolt and
excentric ring – adjustable N
Design: 2 RS lubricated for
lifetime.
Bestell-Nummer D RH6 Ex Be SW G L H O K B A T M N FR FA
Baugröße mm mm mm mm mm mm mm mm mm mm mm mm kN kN
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
26
UP - - -.0700 Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 36.
You can find the fitting profiles in Nb quality starting
from page 36.
27
NEU
TR - - -.4300
Tigerrolle
mit Anschraubbolzen
kombiniert - justierbar
Ausführung: 2 RS
Die Tigerrollen sind
lebensdauergeschmiert.
Tiger bearing
with threaded bolt
combined - adjustable
Design: 2 RS
The tiger bearing are
lubricated for lifetime.
Sonderabmessungen
auf Anfrage.
Special dimensions
on request.
Bestell-Nummer D T H B L F d M FR FA
Baugröße mm mm mm mm mm mm mm mm kN kN
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
28
NEU
UP - - -.0700 Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 36.
You can find the fitting profiles in Nb quality starting
from page 36.
Indication:
110 132 43 50 UP 120.0700 IP 120.0800
Technical dimensioning bea-
ring/profile, with consideration
151 102 68 71 UP 150.0700
of hertzian pressure FR and FA.
29
TR - - -.0250
Tigerrolle
kombiniert – fest
Ausführung: 2 RS
Die Tigerrollen sind
lebensdauergeschmiert.
Ab Baugröße 070 haben
die Tigerrollen ein M6
Gewinde für Schmier-
nippel, um ein Nach-
schmieren zu ermöglichen.
Tiger bearing
combined – fixed
Design: 2 RS
The tiger bearing are
lubricated for lifetime.
Starting from size 070
the tiger bearings have a
thread M6 for lubrication
cups for relubrication.
Sonderabmessungen
Special dimensions
Bestell-Nummer D d H B G L F T R FR FA
Baugröße mm mm mm mm mm mm mm mm mm kN kN
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
30
UP - - -.0700 Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 36.
You can find the fitting profiles in Nb quality starting
from page 36.
45,5 51 14 13 IP 070.0800
Hinweis:
48 56,8 18 18 IP 080.0800
Technische Auslegung Rolle/
Profil, unter Berücksichtigung
68 72 23 23 UP 090.0700 IP 090.0800
der Hertz’schen Pressung
81 95 31 36 IP 110.0800 FR und FA.
31
NEU
Rolle / Roller
STR 060.6200
Rolle / Roller
STR 070.6200
STR - - -.6200
Schwerlast-Tigerrolle
Axialrolle mit 40 %
höherer Tragfähigkeit.
Sonderabmessungen
auf Anfrage. Traglast axial FA = 11 kN
Rolle / Roller Load capacity axial FA = 11 kN
STR 080.6200
Special dimensions
on request.
Rolle / Roller
STR 090.6200
Traglast axial FA = 11 kN
Load capacity axial FA = 11 kN
Traglast axial FA = 13 kN
Load capacity axial FA = 13 kN
32
NEU
Rolle / Roller
STR 110.6200
Rolle / Roller
STR 120.6200
STR - - -.6200
Schwerlast-Tigerrolle
Axialrolle mit 40 %
höherer Tragfähigkeit.
Sonderabmessungen
Traglast axial FA = 20 kN auf Anfrage.
Rolle / Roller Load capacity axial FA = 20 kN
STR 150.6200
Special dimensions
on request.
Traglast axial FA = 20 kN
Load capacity axial FA = 20 kN
Rolle / Roller
SFE 070.5200
SFE - - -.5200
Schwerlast-
Führungseinheit
Axialrolle mit 40 %
höherer Tragfähigkeit Traglast axial FA = 7 kN
Load capacity axial FA = 7 kN
Exzenterrollen zur
Spielfreiheit beidseitig
anstellbar.
Heavy duty
guideway unit
axial bearing with 40 % Traglast axial FA = 11 kN
higher load capacity Rolle / Roller Load capacity axial FA = 11 kN
excentric bearing SFE 080.5200
adjustable to minimize
clearance.
Sonderabmessungen
auf Anfrage. Rolle / Roller
SFE 090.5200
Special dimensions
on request.
Traglast axial FA = 11 kN
Load capacity axial FA = 11 kN
Traglast axial FA = 13 kN
Load capacity axial FA = 13 kN
34
NEU
Rolle / Roller
SFE 110.5200
Rolle / Roller
SFE 120.5200 SFE - - -.5200
Schwerlast-
Führungseinheit
Axialrolle mit 40 %
höherer Tragfähigkeit
Exzenterrollen zur
Traglast axial FA = 20 kN Spielfreiheit beidseitig
Load capacity axial FA = 20 kN
anstellbar.
Heavy duty
guideway unit
axial bearing with 40 %
higher load capacity
excentric bearing
Traglast axial FA = 20 kN adjustable to minimize
Rolle / Roller clearance.
Load capacity axial FA = 20 kN
SFE 150.5200
Sonderabmessungen
auf Anfrage.
Special dimensions
on request.
Traglast axial FA = 20 kN
Load capacity axial FA = 20 kN
UP 060.0700
(Standard 0 Nb)
UP - - -.0700
Gewicht/Weight: 10,5 kg/m
Wx: 32,0 cm 3
U-Führungsprofil Wy: 6,0 cm 3
Werkstoff 18MnNb 6 Ix: 139,0 cm 4
Iy: 16,0 cm 4
mit deutlicher höherer
Tragfähigkeit durch Zusatz
von Niob (Nb):
- Höhere Verschleiß- UP 070.0700
(Standard 1 Nb)
festigkeit,
- feinkörniges Gefüge, Gewicht/Weight: 14,8 kg/m
U guiding profile
Material 18MnNb 6
with plenty more load
UP 080.0700
capacity by add-on of
(Standard 2 Nb)
Niob (Nb):
Gewicht/Weight: 20,9 kg/m
- Higher wear-
Wx: 81,0 cm 3
resistance, Wy: 15,0 cm 3
- fine graned structure, Ix: 495,0 cm 4
Iy: 39,0 cm 4
- easy to weld.
UP 090.0700
(Standard 3 Nb)
Gewicht/Weight: 28,6 kg/m
Wx: 130,0 cm 3
Wy: 31,0 cm 3
Ix: 865,0 cm 4
Iy: 89,0 cm 4
UP - - -.0700
UP 120.0700
(Standard 5 Nb)
U-Führungsprofil
Gewicht/Weight: 42,8 kg/m
Werkstoff 18MnNb 6
Wx: 251,0 cm 3 mit deutlicher höherer
Wy: 51,0 cm 3
Ix: 2192,0 cm 4 Tragfähigkeit durch Zusatz
Iy: 212,0 cm 4 von Niob (Nb):
- Höhere Verschleiß-
festigkeit,
- feinkörniges Gefüge,
- sehr gut schweiß-
UP 150.0700 geeignet.
(Standard 6 Nb)
Gewicht/Weight: 52,3 kg/m U guiding profile
Wx: 342,0 cm 3
Material 18MnNb 6
Wy: 57,0 cm 3 with plenty more load
Ix: 3432,0 cm 4
Iy: 273,0 cm 4
capacity by add-on of
Niob (Nb):
- Higher wear-
resistance,
- fine graned structure,
- easy to weld.
UP 180.0700
(Standard 8 Nb)
Gewicht/Weight: 78,51 kg/m
Wx: 682,2 cm 3
Wy: 223,4 cm 3
Ix: 8612,5 cm 4
Iy: 720,2 cm 4
walzprofile / Profiles
IP - - -.0800
I-Führungsprofil
Werkstoff 18MnNb 6
mit deutlicher höherer
Tragfähigkeit durch Zusatz IP 070.0800
(3018 Nb)
von Niob (Nb):
Gewicht/Weight: 19,4 kg/m
- Höhere Verschleiß-
festigkeit, Wx: 72,0 cm 3
Wy: 18,0 cm 3
- feinkörniges Gefüge, Ix: 344,0 cm 4
- sehr gut schweiß- Iy: 59,0 cm 4
geeignet.
I guiding profile
Material 18MnNb 6
with plenty more load
capacity by add-on of
Niob (Nb):
- Higher wear-
resistance,
IP 080.0800
- fine graned structure, (3019 Nb)
- easy to weld.
Gewicht/Weight: 25,3 kg/m
Wx: 103,0 cm 3
Wy: 23,0 cm 3
Ix: 582,0 cm 4
Iy: 76,0 cm 4
IP - - -.0800
I-Führungsprofil
Werkstoff 18MnNb 6
mit deutlicher höherer
IP 110.0800 Tragfähigkeit durch Zusatz
(3100 Nb)
von Niob (Nb):
Gewicht/Weight: 40,8 kg/m
- Höhere Verschleiß-
Wx: 223,0 cm 3 festigkeit,
Wy: 102,0 cm 3
Ix: 1694,0 cm 4 - feinkörniges Gefüge,
Iy: 416,0 cm 4 - sehr gut schweiß-
geeignet.
I guiding profile
Material 18MnNb 6
with plenty more load
capacity by add-on of
Niob (Nb):
- Higher wear-
resistance,
IP 120.0800
(3353 Nb) - fine graned structure,
- easy to weld.
Gewicht/Weight: 51,5 kg/m
Wx: 322,0 cm 3
Wy: 65,0 cm 3
Ix: 2818,0 cm 4
Iy: 291,0 cm 4
walzprofile / Profiles
UP - - -.0700
U-Führungsprofil
Werkstoff 18MnNb 6
mit deutlicher höherer
Tragfähigkeit durch Zusatz
von Niob (Nb).
Mit standardisierten
Befestigungsgewinden.
U guiding profile
Material 18MnNb 6
with plenty more load
capacity by add-on of Niob
(Nb). Die Profile werden nach Ihren Vorgaben gefertigt.
With standardized thread Bitte geben Sie die gewünschte Teilung an.
holes.
The Profiles are manufactured according to your specifications.
Please define the favoured pitch.
40
KS - - -.3650
Klemmkonsole
für U-Profile und Präzisi-
onsprofile von Baugröße
050 bis 090.
Clamp console
for U-profiles and
precision U-profiles
from size 050 up to 090.
Weitere Größen
auf Anfrage.
Further sizes
on request.
Bestell-Nummer A B C D E F G H l J K L
Baugröße mm mm mm mm mm mm mm mm mm mm mm
41
NEU
UPx - - -.0700
U-Führungsprofil
gebogen nach Ihren
Vorgaben
Werkstoff 18MnNb 6
U guiding profile
bent according to your
specifications Die Profile werden nach Ihren Vorgaben
Material 18MnNb 6 in X-Richtung gebogen.
Bitte geben Sie den gewünschten Radius
und Winkel an.
42
NEU
UPy - - -.0700
U-Führungsprofil
gebogen nach Ihren
Vorgaben
Werkstoff 18MnNb 6
U guiding profile
bent according to your
Die Profile werden nach Ihren Vorgaben
specifications
in X-Richtung gebogen.
Material 18MnNb 6
Bitte geben Sie den gewünschten Radius
und Winkel an.
Profile / Profiles
43
PT - - -.0260
Tigerrolle
kombiniert – fest
Ausführung: 2 RS
Die Tigerrollen sind
lebensdauergeschmiert.
Ab Baugröße 070 haben
die Tigerrollen ein M6
Gewinde für Schmier-
nippel, um ein Nach-
schmieren zu ermöglichen.
Tiger bearing
combined – fixed
Design: 2 RS
The tiger bearing are
lubricated for lifetime.
Starting from size 070
the tiger bearings have a
thread M6 for lubrication
cups for relubrication. Präzisions-Tigerrrolle
Precision tiger bearing
Bestell-Nummer D d H B G L F T R FR FA
Baugröße mm mm mm mm mm mm mm mm mm kN kN
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
44
UP - - -.0760 Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 54.
You can find the fitting profiles in Nb quality starting
from page 54.
45
PT - - -.0320
Tigerrolle
kombiniert – justierbar
Ausführung: 2 RS
Die Tigerrollen sind
lebensdauergeschmiert.
Tiger bearing
combined – adjustable
Design: 2 RS
The tiger-bearings are
lubricated for lifetime.
Präzisions-Tigerrrolle
Precision tiger bearing
Bestell-Nummer D d H B A L T FR FA
Baugröße mm mm mm mm mm mm mm kN kN
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
46
UP - - -.0760 Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 54.
You can find the fitting profiles in Nb quality starting
from page 54.
47
PT - - -.0365
Tigerrolle
kombiniert – justierbar
mit Exzenter
Ausführung: 2 RS
Die Tigerrollen sind
lebensdauergeschmiert.
Tiger bearing
combined – adjustable
with excenter
Design: 2 RS
The tiger bearing are
lubricated for lifetime.
Präzisions-Tigerrrolle
Precision tiger bearing
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
48
UP - - -.0760 Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 54.
You can find the fitting profiles in Nb quality starting
from page 54.
49
PT - - -.0362
Tigerrolle
kombiniert – justierbar
mit Oilamidzapfen
Ausführung: 2 RS
Die Tigerrollen sind
lebensdauergeschmiert.
Tiger bearing
combined – adjustable
with oilamide tap
Design: 2 RS
The tiger bearing are
lubricated for lifetime.
Präzisions-Tigerrrolle
Precision tiger bearing
Bestell-Nummer D d H B A L T FR FA
Baugröße mm mm mm mm mm mm mm kN kN
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
50
UP - - -.0760 Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 54.
You can find the fitting profiles in Nb quality starting
from page 54.
51
PT - - -.0460
Tigerrolle
kombiniert – radial
Ausführung: 2 RS
Die Tigerrollen sind
lebensdauergeschmiert.
Ab Baugröße 070 haben
die Tigerrollen ein M6
Gewinde für Schmier-
nippel, um ein Nach-
schmieren zu ermöglichen.
Tiger bearing
combined – radial
Design: 2 RS
The tiger bearing are
lubricated for lifetime.
Starting from size 070
the tiger bearings have a
thread M6 for lubrication
cups for relubrication. Präzisions-Tigerrrolle
Precision tiger bearing
Bestell-Nummer D d H B G L F T FR
Baugröße mm mm mm mm mm mm mm mm kN
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
52
UP - - -.0760 Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 54.
You can find the fitting profiles in Nb quality starting
from page 54.
53
UP 060.0760
(Nb)
Gewicht/Weight: 9,4 kg/m
Wx: 24,0 cm 3
Wy: 6,0 cm 3
Ix: 126,0 cm 4
Iy: 13,0 cm 4
UP - - -.0760
UP 070.0760
U-Präzisions- (Nb)
Führungsprofil Gewicht/Weight: 13,4 kg/m
Höhere Präzision durch Wx: 41,0 cm 3
bearbeitete Laufflächen. Wy: 10,0 cm 3
Ix: 255,0 cm 4
Werkstoff 18MnNb 6 Iy: 25,0 cm 4
mit deutlicher höherer
Tragfähigkeit durch Zusatz
von Niob (Nb):
- Höhere Verschleiß-
festigkeit,
- feinkörniges Gefüge,
UP 080.0760
- sehr gut schweiß-
(Nb)
geeignet.
Gewicht/Weight: 17,8 kg/m
Wx: 63,0 cm 3
U precision profile Wy: 13,0 cm 3
Higher precision based on Ix: 449,0 cm 4
Iy: 36,0 cm 4
machined surface.
Material 18MnNb 6
with plenty more load
capacity by add-on of
Niob (Nb):
- Higher wear-
resistance,
- fine graned structure, UP 090.0760
(Nb)
- easy to weld.
Gewicht/Weight: 24,9 kg/m
Wx: 99,0 cm 3
Wy: 25,0 cm 3
Ix: 795,0 cm 4
Iy: 80,0 cm 4
54
UP 110.0760
(Nb)
Gewicht/Weight: 32,1 kg/m
Wx: 148,0 cm 3
Wy: 37,0 cm 3
Ix: 1382,0 cm 4
Iy: 138,0 cm 4
UP - - -.0760
UP 120.0760
(Nb) U-Präzisions-
Gewicht/Weight: 36,3 kg/m Führungsprofil
Wx: 188,0 cm 3
Höhere Präzision durch
Wy: 45,0 cm 3 bearbeitete Laufflächen.
Ix: 1980,0 cm 4
Iy: 195,0 cm 4
Werkstoff 18MnNb 6
mit deutlicher höherer
Tragfähigkeit durch Zusatz
von Niob (Nb):
- Höhere Verschleiß-
festigkeit,
- feinkörniges Gefüge,
UP 150.0760
- sehr gut schweiß-
(Nb)
geeignet.
Gewicht/Weight: 44,7 kg/m
Wx: 259,0 cm 3
Wy: 53,0 cm 3
U precision profile
Ix: 3117,0 cm 4 Higher precision based on
Iy: 240,0 cm 4
machined surface.
Material 18MnNb 6
with plenty more load
capacity by add-on of
Niob (Nb):
- Higher wear-
resistance,
- fine graned structure,
- easy to weld.
profile / Profiles
UP - - -.0760
U-Präzisions-
Führungsprofil
Höhere Präzision durch
bearbeitete Laufflächen.
Werkstoff 18MnNb 6
mit deutlicher höherer
Tragfähigkeit durch Zusatz
von Niob (Nb).
Mit standardisierten
Befestigungsgewinden.
U precision profile
Higher precision based on Die Profile werden nach Ihren Vorgaben gefertigt.
machined surface. Bitte geben Sie die gewünschte Teilung an.
Material 18MnNb 6
with plenty more load The Profiles are manufactured according to your specifications.
capacity by add-on of Niob Please define the favoured pitch.
(Nb).
With standardized thread
holes.
56
NEU
UP - - -.0760
U-Präzisions-
Führungsprofil
Höhere Präzision durch
bearbeitete Laufflächen.
Werkstoff 18MnNb 6
mit deutlicher höherer
Tragfähigkeit durch Zusatz
von Niob (Nb).
Sonderbearbeitung auf Anfrage.
Mit standardisierten
Special machining on request. Befestigungsgewinden.
U precision profile
Higher precision based on
machined surface.
Material 18MnNb 6
with plenty more load
capacity by add-on of
Niob (Nb).
With standardized thread
holes.
Walzprofile / Profiles
57
Weltneuheit | X | tra-Strong
Dream-Team: Führungsprofil und Tigerrolle
58
|X| tra-Strong
|X |Rund 60 % höhere Lastaufnahme
|X| ± 0,2 mm Kammermaßtoleranz
Dream-Team:
Führungsprofil und Tigerrolle
Achtung: Die Tragzahlen in dieser Tabelle sind über die Hertz’sche Pressung, Rolle/Profil berechnet.
Bei Geschwindigkeiten > 10 m/min Sicherheitsfaktor berücksichtigen.
Attention: In this table the load capacity is calculated by the hertzian pressure.
Driving speed > 10 m/min use safety factor.
59
NEU
XTR - - -.0200
|X| tra-Strong
Tigerrolle
kombiniert – fest
Ausführung: 2 RS
| X| tra tragfähig
| X| tra genau
| X| tra stark
| X| tra langlebig
|X| tra-Strong
Tiger bearing
combined – fixed
Design: 2 RS
| X| tra sustainable
| X| tra exact
| X| tra strong
| X| tra long-lasting
Bestell-Nummer D d H B G L F T R FR FA
Baugröße mm mm mm mm mm mm mm mm mm kN kN
XTR 150 .0200 153,1 60 78,5 45 8,5 58,5 20 103 50 82,19 22,60
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
60
NEU
XUP - - -.0700 Die passenden |X| tra-Strong-Führungsprofile finden
Sie ab Seite 70.
You can find the fitting |X| tra-Strong profiles starting
from page 70.
61
NEU
XTR - - -.0300
|X| tra-Strong
Tigerrolle
kombiniert – Justage
über Distanzringe
Ausführung: 2 RS
| X| tra tragfähig
| X| tra genau
| X| tra stark
| X| tra langlebig
|X| tra-Strong
Tiger bearing
combined – adjustable
with insert washer
Design: 2 RS
| X| tra sustainable
| X| tra exact
| X| tra strong
| X| tra long-lasting
XTR 060
TR 050 .0300
.0200 65,5
52,5 3030 33 43 17 20
5 5,5
27 6 33 40 42 16 15,39
5,30 3,80
2,00
XTR 070
TR 060 .0300
.0200 73,8
62,5 3035 37,5 48 20 23
9 6,5
30,5 7 40 42 48 20 16,43
8,87 4,10
2,95
XTR 080
TR 070 .0300
.0200 70,1
81,7 3540 44 50,5 23 10,5
23 36
7 8 39,5 48 54 22 18,21
11,40 6,50
3,15
XTR 090
TR 080 .0300
.0200 92,4
77,7 4045 48 61 23 30
10,5 7
36,5 11,5 48 54 59 24 31,68
12,87 6,60
5,00
XTR 110
TR 090 .0300
.0200 111,4
88,4 4560 57 69 30 31
10,5 8
44 13 55 59 71 26 34,85
20,37 11,50
5,10
XTR 120
TR 110 .0300
.0200 107,7
126,8 6060 69 75,8 31 37
20 8
55 14 59,5 71 80 34 47,43
24,06 12,70
8,90
TR 120
XTR 150 .0200
.0300 123
153,1 6060 72,3 89 37 45
14 15
56 16,3 69 80 103 40 33,44
82,19 9,80
22,60
C TR
= 150
Dynamische.0200 149
Tragzahl Radiallager 60 load capacity
/ Dynamic 78,5 radial 45bearing 8,5 C0 58,5
= Statische 20 103
Tragzahl Radiallager 51,94radial bearing
50 load capacity
/ Static 17,40
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
62
NEU
UP - - -.0700
XUP - -.0700 Die passenden
Deutsch. Ut nim|Xdo
| tra-Strong-Führungsprofile
eugait ullan volum nos. Utfinden
nim
Sie ab
doSeite
eugait
70.ullan volum nos.
Englisch. Ut nim
You can find the do eugait
fitting ullan volum
| X| tra-Strong nos. Ut
profiles nim
starting
do eugait ullan
from page 70. volum nos.
CC CC CC C0a
C0a Führungsprofile
Führungsprofile Bestellbeispiel / Order example:
00 aa
XTR 090.0300
kN
kN kN
kN kN
kN kN
kN U-Profil
U-Profil I-Profil
|X| tra-Strong Tigerrolle,
31
24,5 35,5
32,5 8 7,5
7,5 8 XUP050.0726
UP 060.0700 kombiniert - justierbar,
Ø 92,4 mm
45,5
31 51
35,5 118 11,5
8 XUP060.0700
UP 070.0700 IP 060.0800
45,5
48 51
56,8 14
14 13
14 UP
XUP070.0700
080.0700 IP 070.0800
68
48 72
56,8 15
18 15
18 XUP080.0700
UP 090.0700 IP 080.0800 Hinweis:
Technische Auslegung Rolle/
81
68 95
72 31
23 36
23 XUP090.0700
UP 110.0700 IP 090.0800 Profil, unter Berücksichtigung
der Hertz’schen Pressung
110
81 132
95 31
31 36
36 XUP110.0700
UP 120.0700 IP 110.0800 FR und FA.
151
110 192
132 68
43 71
50 XUP120.0700
UP 150.0700 IP 120.0800 Indication:
Technical dimensioning bea-
151 102 68 71 UP 150.0700 ring/profile, with consideration
of hertzian pressure FR and FA.
63
NEU
XTR - - -.0400
|X| tra-Strong
Tigerrolle
kombiniert – radial
Ausführung: 2 RS
| X| tra tragfähig
| X| tra genau
| X| tra stark
| X| tra langlebig
|X| tra-Strong
Tiger bearing
combined – radial
Design: 2 RS
| X| tra sustainable
| X| tra exact
| X| tra strong
| X| tra long-lasting
Bestell-Nummer D d H B G L F T FR
Baugröße mm mm mm mm mm mm mm mm kN
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
64
NEU
XUP - -.0700
UP - - -.0700 Deutsch. Ut nim|Xdo
Die passenden | tra-Strong-Führungsprofile
eugait ullan volum nos. Utfinden
nim
Sie ab
doSeite
eugait
70.ullan volum nos.
Englisch. Ut nim
You can find the do eugait
fitting ullan volum
| X| tra-Strong nos. Ut
profiles nim
starting
do eugait ullan
from page 70. volum nos.
65
NEU
Rolle / Roller
XSTR 060.6200
Rolle / Roller
XSTR 070.6200
XSTR - - -.6200
|X| tra-Strong
Schwerlast-Tigerrolle
Axialrolle mit 35 %
höherer Tragfähigkeit.
| X| tra tragfähig
| X| tra genau Traglast axial FA = 9 kN
| X| tra stark Load capacity axial FA = 9 kN
| X| tra langlebig
|X| tra-Strong
Sonderabmessungen
auf Anfrage.
Special dimensions
on request.
Traglast axial FA = 14 kN
Load capacity axial FA = 14 kN
Traglast axial FA = 17 kN
Load capacity axial FA = 17 kN
66
NEU
Rolle / Roller
XSTR 110.6200
Rolle / Roller
XSTR 120.6200
XSTR - - -.6200
|X| tra-Strong
Schwerlast-Tigerrolle
Axialrolle mit 35 %
höherer Tragfähigkeit.
| X| tra tragfähig
Traglast axial FA = 27 kN | X| tra genau
Load capacity axial FA = 27 kN | X| tra stark
| X| tra langlebig
|X| tra-Strong
Sonderabmessungen
auf Anfrage.
Special dimensions
on request.
Traglast axial FA = 27 kN
Load capacity axial FA = 27 kN
67
NEU
Rolle / Roller
XSFE 060.5200
Rolle / Roller
XSFE 070.5200
XSFE - - -.5200
|X| tra-Strong
Schwerlast-
Führungseinheit
Axialrolle mit 35 % Traglast axial FA = 9 kN
Load capacity axial FA = 9 kN
höherer Tragfähigkeit
Exzenterrollen zur
Spielfreiheit beidseitig
anstellbar.
| X| tra tragfähig
| X| tra genau
| X| tra stark
Traglast axial FA = 14 kN
| X| tra langlebig Rolle / Roller Load capacity axial FA = 14 kN
XSFE 080.5200
|X| tra-Strong
Heavy duty
guideway unit
axial bearing with 35 %
higher load capacity
excentric bearing
Rolle / Roller
adjustable to minimize
XSFE 090.5200
clearance.
| X| tra sustainable
| X| tra exact
| X| tra strong
| X| tra long-lasting
Traglast axial FA = 14 kN
Sonderabmessungen
Load capacity axial FA = 14 kN
auf Anfrage.
Special dimensions
on request.
Traglast axial FA = 17 kN
Load capacity axial FA = 17 kN
68
NEU
Rolle / Roller
XSFE 110.5200
Rolle / Roller
XSFE 120.5200 XSFE - - -.5200
|X| tra-Strong
Schwerlast-
Führungseinheit
Axialrolle mit 35 %
höherer Tragfähigkeit
Traglast axial FA = 27 kN Exzenterrollen zur
Load capacity axial FA = 27 kN
Spielfreiheit beidseitig
anstellbar.
| X| tra tragfähig
| X| tra genau
| X| tra stark
| X| tra langlebig
|X| tra-Strong
Traglast axial FA = 27 kN
Rolle / Roller Heavy duty
Load capacity axial FA = 27 kN
XSFE 150.5200 guideway unit
axial bearing with 35 %
higher load capacity
excentric bearing
adjustable to minimize
clearance.
| X| tra sustainable
| X| tra exact
| X| tra strong
| X| tra long-lasting
Sonderabmessungen
auf Anfrage.
Special dimensions
Traglast axial FA = 27 kN on request.
Load capacity axial FA = 27 kN
XUP - - -.0700
XUP 070.0700
|X| tra-Strong
Gewicht/Weight: 13,97 kg/m
U-Führungsprofil
Wx: 50,4 cm 3
Werkstoff 25 MnV5mod Wy: 17,6 cm 3
mit deutlicher höherer Ix: 260,1 cm 4
Iy: 25,4 cm 4
Tragfähigkeit.
| X| tra tragfähig
| X| tra genau
| X| tra stark
| X| tra langlebig
|X| tra-Strong
XUP 090.0700
Gewicht/Weight: 27,65 kg/m
Wx: 124,1 cm 3
Wy: 43,9 cm 3
Ix: 840,2 cm 4
Iy: 85,2 cm 4
| X | Walzprofile / | X | ProfileS
70
NEU
XUP 110.0700
Gewicht/Weight: 34,77 kg/m
Wx: 184,6 cm 3
Wy: 65,7 cm 3
Ix: 1451,0 cm 4
Iy: 144,2 cm 4
XUP - - -.0700
XUP 120.0700
|X| tra-Strong
Gewicht/Weight: 41,69 kg/m
U-Führungsprofil
Wx: 242,9 cm 3
Wy: 85,2 cm 3 Werkstoff 25 MnV5mod
Ix: 2125,3 cm 4 mit deutlicher höherer
Iy: 197,0 cm 4
Tragfähigkeit.
| X| tra tragfähig
| X| tra genau
| X| tra stark
| X| tra langlebig
|X| tra-Strong
XUP 150.0700 U guiding profile
Gewicht/Weight: 50,99 kg/m Material 25 MnV5mod
Wx: 330,7 cm 3 with plenty more load
Wy: 109,7 cm 3 capacity.
Ix: 3332,3 cm 4
| X| tra sustainable
Iy: 257,6 cm 4
| X| tra exact
| X| tra strong
| X| tra long-lasting
Mammut bearing
combined – adjustable
with excenter
Design: ZZ
The Mammut bearings are
lubricated for lifetime, but
they have a lubrication cup
for relubrication.
Sonderabmessungen auf Anfrage.
Special dimensions on request.
MR 340 .0610 340 140 89 10 120 120 30 240 100 260,00 51,00
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
72
MPU - - -.08 - - Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 76.
You can find the fitting profiles in Nb quality starting
from page 76.
73
NEU
MR - - -.0410
Mammutrolle
kombiniert – radial
Ausführung: ZZ
Die Mammutrollen sind
lebensdauergeschmiert,
verfügen jedoch über
einen Schmiernippel, um
ein Nachschmieren zu
ermöglichen.
Mammut bearing
combined – radial
Design: ZZ
The Mammut bearings are
lubricated for lifetime, but
they have a lubrication cup
for relubrication.
Bestell-Nummer D d B G L F T FR
Baugröße mm mm mm mm mm mm mm kN
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
74
NEU
MP - - -.08 - - Die passenden Führungsprofile in Nb-Qualität finden
Sie ab Seite 76.
You can find the fitting profiles in Nb quality starting
from page 76.
75
NEU
MP - - -.08 - -
Mammut-Führungsprofile
Aus Stahl S355 J2G3 mehr-
teilig zusammengeschweißt
und maschinell bearbeitet
(-2).
Auf Wunsch kann auch nur
eine Laufbahn bearbeitet
werden (-1).
Fertigungslängen bis
8000 mm.
Mammut profiles
Made of steel UNI FE 510-C,
welded and milled (-2).
It‘s also possible to mill one
track (-1).
Manufacturing length up to
8000 mm.
Bestell-Nummer H B D C S Wx Wy lx ly Gewicht
Baugröße mm mm mm mm mm cm3 cm3 cm4 cm4 kg/m
MP 165 .0810-1 .0810-2 230 100 165,4 70 16 593 100 6825 475 71
MP 190 .0816-1 .0816-2 255 130 190,4 70 20 940 185 11983 1203 100
MP 220 .0818-1 .0818-2 295 150 220,4 90 20 1426 283 21035 2123 128
MP 250 .0828-1 .0828-2 345 160 250,4 90 25 2196 410 37883 3279 175
MP 280 .0836-1 .0836-2 375 190 280,4 120 30 2945 578 55210 5498 215
MP 280 .0842-1 .0842-2 395 190 280,4 120 30 3505 700 69230 6642 245
MP 340 .0852-1 440 230 340,5 120 40 4767 980 104871 11275 302
Bestellbeispiel / Order example: MP 250.0828-2 Mammutprofil mit Innenmaß 250,4 mm, beide Seiten bearbeitet.
76
NEU
MPMPU
- - -.08
- - --.08
- --
Mammut-Führungsprofile
Aus Stahl S355 J2G3 mehr-
teilig zusammengeschweißt
und maschinell bearbeitet.
Fertigungslängen bis
8000 mm.
Mammut profiles
Made of steel UNI FE 510-C,
welded and milled.
Manufacturing length up to
8000 mm.
Bestell-Nummer H B D C S Wx Wy lx ly Gewicht
Baugröße mm mm mm mm mm cm3 cm3 cm4 cm4 kg/m
MPU 165 .0810 230 75,5 165,4 80 18 383 87 4410 174 53,3
MPU 190 .0816 255 77 190,4 80 22 598 167 7631 434 73,7
MPU 220 .0818 295 85 220,4 125 20 856 231 12632 672 86,1
MPU 250 .0828 344 94 250,4 125 26,5 1358 344 23371 1117 122,8
MPU 280 .0842 394 114 280,4 125 26,5 2156 577 42473 2354 161,9
Bestellbeispiel / Order example: MPU 250.0828 Mammutprofil mit Innenmaß 250,4 mm.
77
HTR - - -.0360
Hochtemperaturrolle
mit Gleitstück bis 250 °C
Ausführung: ZZ lebens-
dauergeschmiert.
HTR 060 .0360 62,5 30 43 20 9 33 10 42 5,5 8,87 2,95 31 35,5 8 8 UP 060.0700 IP 060.0800
HTR 070 .0360 70,1 35 48 23 10,5 40 8 48 6,5 11,40 3,15 45,5 51 8 8 UP 070.0700 IP 070.0800
HTR 080 .0360 77,7 40 51 23 10,5 39,5 11,5 54 7 12,87 5,00 48 56,8 14 14 UP 080.0700 IP 080.0800
HTR 120 .0360 123 60 75,8 37 14 59,5 16,3 80 8 33,44 9,80 110 132 31 36 UP 120.0700 IP 120.0800
HTR 150 .0360 149 60 82 45 8,5 62 20 103 8 51,94 17,40 151 192 68 71 UP 150.0700
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Bestellbeispiel
C / Order example: HTR 090.0360 (Hochtemperaturrrolle, Ø 88,4Cmm,
a = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing
bis 250 °C).
0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
78
MPHTR
- - -.08
- - -.0200
--
Hochtemperaturrolle
mit Axialrolle bis 250 °C
Ausführung: ZZ lebens-
dauergeschmiert.
HTR 060 .0200 62,5 30 37,5 20 9 30,5 7 42 20 8,87 2,95 31 35,5 8 8 UP 060.0700 IP 060.0800
HTR 070 .0200 70,1 35 44 23 10,5 36 8 48 22 11,40 3,15 45,5 51 8 8 UP 070.0700 IP 070.0800
HTR 080 .0200 77,7 40 48 23 10,5 36,5 11,5 54 24 12,87 5,00 48 56,8 14 14 UP 080.0700 IP 080.0800
HTR 120 .0200 123 60 72,3 37 14 56 16,3 80 40 33,44 9,80 110 132 31 36 UP 120.0700 IP 120.0800
HTR 150 .0200 149 60 78,5 45 8,5 58,5 20 103 50 51,94 17,40 151 192 68 71 UP 150.0700
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
Bestellbeispiel / Order example: HTR 090.0200 (Hochtemperaturrrolle, Ø 88,4 mm, bis 250 °C).
79
TR - - -.4100
Tigerrolle
mit axialer Kugel
Ausführung: 2 RS
Die Tigerrollen sind
lebensdauergeschmiert.
Tiger bearing
with axial ball
Design: 2 RS
The tiger bearing are
lubricated for lifetime.
TR 070 .0410 70,1 35 48 23 10,5 40 8 48 6,5 11,40 3,15 45,5 51 0,5 0,5 UPx 070.0700 UPy 070.0800
TR 080 .0410 77,7 40 51 23 10,5 39,5 11,5 54 7 12,87 5,00 48 56,8 0,5 0,5 UPx 080.0700 UPy 080.0800
Führungseinheit
/
ar ble Einbau-Information
stellb justa
ein h ad
m s
e lar ckla
i
Sp le ba Guideway unit
Litt
assembling information
s adjustable
stellbar /
beidseitig an
On both side
Kontermutter /
counternut
Anstell-Vierkant /
Adjustment square
Führungseinheit -
Tragrolle und Exzenterrolle
zur Spielminimierung beidseitig
anstellbar.
Guideway unit -
Tragrolle / Suspension roller
Anlageseite / Lay-on side tiger bearing and eccentric bearing
to minimize clearence by tuning.
81
Rolle / Roller
FE 060.5200
Beilegblech /
Distance sheet
BQ 060.1405
BQ 060.1410
Guideway unit -
tiger bearing and
eccentric bearing
to minimize clearence Rolle / Roller
by tuning. FE 080.5200
Beilegblech /
Distance sheet
Sonderabmessungen
BQ 080.1405
auf Anfrage. BQ 080.1410
Special dimensions
on request.
Rolle / Roller
FE 090.5200
Beilegblech /
Distance sheet
BQ 090.1405
BQ 090.1410
rechteckig / rectangular
82
Rolle / Roller
FE 110.5200
Beilegblech /
Distance sheet
BQ 110.1405
BQ 110.1410
FE - - -.5200
Führungseinheit -
Tragrolle und
Exzenterrolle
Rolle / Roller
zur Spielminimierung
FE 120.5200
beidseitig anstellbar.
Beilegblech /
Distance sheet Guideway unit -
BQ 120.1405 tiger bearing and
BQ 120.1410 eccentric bearing
to minimize clearence
by tuning.
Sonderabmessungen
auf Anfrage.
Special dimensions
on request.
Rolle / Roller
FE 150.5200
Beilegblech /
Distance sheet
BQ 150.1405
BQ 150.1410
Special dimensions
on request.
quadratisch / square
84
Rolle / Roller Platte / Plate
TR 110.--- BQ 1000
BQ - - -.1000
Rolle / Roller Platte / Plate
TR 120.--- BQ 1000
Befestigungsplatte
Beilegblech / Distance sheet Technische Daten
BQ 120.1405 Die Befestigungsplatte
BQ 120.1410 ist mit der jeweiligen
Tigerrolle als Baugruppe
verschweißt und fertig
montiert.
Sonderabmessungen
auf Anfrage.
Rolle / Roller Platte / Plate
TR 180.--- BQ 1000 Special dimensions
on request.
Beilegblech / Distance sheet
BQ 180.1405
BQ 180.1410
BQ - - -.1000
MAMMUT-
Befestigungsplatte
Technische Daten
Rolle / Roller Platte / Plate
Die Befestigungsplatte
MR 190.--- BQ 1000
ist mit der jeweiligen
Mammutrolle als
Baugruppe verschweißt
und fertig montiert.
MAMMUT-
Flange plate
Technical characteristics
The flange plate
is welded with the
respectice combined
bearing and complete
assembled. Rolle / Roller Platte / Plate
MR 220.--- BQ 1000
quadratisch / square
86
NEU
Rolle / Roller Platte / Plate
MR 250.--- BQ 1000
BQ - - -.1000
MAMMUT-
Befestigungsplatte
Technische Daten
Die Befestigungsplatte
ist mit der jeweiligen
Rolle / Roller Platte / Plate Mammutrolle als
MR 280.--- BQ 1000 Baugruppe verschweißt
und fertig montiert.
MAMMUT-
Flange plate
Technical characteristics
The flange plate
is welded with the
respectice combined
bearing and complete
assembled.
BR - - -.1100
Rolle / Roller Platte / Plate
Befestigungsplatte TR 060.--- BR 1100
Technische Daten
Beilegblech / Distance sheet
Die Befestigungsplatte BR 060.1505
ist mit der jeweiligen BR 060.1510
Tigerrolle als Baugruppe
verschweißt und fertig
montiert.
Flange plate
Rolle / Roller Platte / Plate
Technical characteristics
TR 070.--- BR 1100
The flange plate
is welded with the Beilegblech / Distance sheet
respectice combined BR 070.1505
bearing and complete BR 070.1510
assembled.
Sonderabmessungen
auf Anfrage.
rechteckig / rectangular
88
Rolle / Roller Platte / Plate
TR 090.--- BR 1100
BR - - -.1100
Rolle / Roller Platte / Plate
TR 110.--- BR 1100 Befestigungsplatte
Technische Daten
Beilegblech / Distance sheet
BR 110.1505 Die Befestigungsplatte
BR 110.1510 ist mit der jeweiligen
Tigerrolle als Baugruppe
verschweißt und fertig
montiert.
Flange plate
Rolle / Roller Platte / Plate
Technical characteristics
TR 120.--- BR 1100
The flange plate
Beilegblech / Distance sheet is welded with the
BR 120.1505 respectice combined
BR 120.1510 bearing and complete
assembled.
Sonderabmessungen
auf Anfrage.
4x M10 Schraube /
4x M10 screw oder 4x M8 Schraube
für Gewindebefestigung /
or 4x M8 screw
for thread fixing
oder 4x M8 Schraube 4x M10 Schraube /
für Gewindebefestigung / 4x M10 screw
BW - - -.1200
or 4x M8 screw oder 4x M10 Schraube
for thread fixing für Rolle / Roller Winkel
Gewindebefestigung / / Angle
or 4x M10 screw
4x M10 Schraube / TR 070.--- BW 1200
for thread fixing
4x M10 screw
4x M12 Schraube /
Befestigungswinkel 4x M12 screw oder 4x M10 Schraube
für Gewindebefestigung /
Technische Daten or 4x M10 screw
Der Befestigungswinkel for thread fixing
oder 4x M10 Schraube 4x M12 Schraube /
ist mit der jeweiligen für Gewindebefestigung / 4x M12 screw
or 4x M10 screw
oder 4x M10 Schraube
Tigerrolle als Baugruppe for thread fixing
für Gewindebefestigung /
verschweißt. or 4x M10 screw
for thread fixing
4x M12 Schraube /
4x M12 screw
4x M12 Schraube /
Rolle / Roller Winkel / Angle 4x M12 screwoder 4x M10 Schraube
TR 080.--- BW 1200 für Gewindebefestigung /
Flange angle or 4x M10 screw
for thread fixing
Technical characteristics oder 4x M10 Schraube
4x M12 Schraube /
für Gewindebefestigung /
4x M12 screw
The flange angle or 4x M10 screw
for thread fixing
is welded with the 4x M12 Schraube /
respectice combined 4x M12 screw
bearing.
4x M12 Schraube /
4x M12 screw
4x M16 Schraube /
4x M16 screw
90
4x M12 screw
4x M16 Schraube /
4x M16 screw
BW - - -.1200
TR - - -.0380
-.0200
Tigerrolle
Kombiniert – fest
chrombeschichtet
Ausführungen: 2 RS
Ausführung:
Die Tigerrollen2sind
RS lebens-
dauergeschmiert.
Chrombeschichteter
Ab Baugröße
Außenring, 080 haben
Bolzen aus
die Tigerrollen
1.4301 ein M6 Ge-
INOX. Oilamid-
winde
zapfenfür
zurSchmiernippel,
Axialführung.
um ein Nachschmieren zu
ermöglichen.
Tiger bearing
Combined – fixed
chrome coated
Design: 2 RS
Design: 2 RS
The tiger bearing are lub-
Outer
ricatedring chrome coated,
for lifetime. Starting
bolt made
from size 080of 1.4301.
the tiger bea-
Oilamide
rings havetap for axial
a thread M6 for
guidance.
lubrication cups, in order to
enable after lubrication.
Beschichtete Profile
auf Anfrage. DR - - -.4905 (0,5 mm dick)
DR - - -.4910 (1,0 mm dick)
Bestell-Nummer
TR 070 .0200 D
70,1 d35 H 44 B A
23 L10,5 T 36 FR 8FA C 48 C0 22 Ca C0a
11,40 Führungsprofile
3,15
Baugröße mm mm mm mm mm mm mm kN kN kN kN kN kN
TR 080 .0200 77,7 40 48 23 10,5 36,5 11,5 54 24 12,87 5,00
TR 070 .0380 70,1 35 48,0 23 6,5 40,0 48 8,87 2,95 45,5 51,0 8 8 UP 070.0780
TR 090 .0200 88,4 45 57 30 10,5 44 13 59 26 20,37 5,10
TR 080 .0380 77,1 40 50,5 23 7,0 39,5 54 12,87 5,00 48,0 56,8 14 14 UP 080.0780
TR 110 .0200 107,7 60 69 31 20 55 14 71 34 24,06 8,90
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
CTR
a = 120
Dynamische.0200
Tragzahl Axiallager
123 / Dynamic 60 load capacity
72,3 axial37 bearing 14 C0a =
56Statische 16,3
Tragzahl Axiallager
80 / Static 40load capacity
33,44axial bearing9,80
MPTR
- - --.08
- -.0390
--
Tigerrolle
Edelstahl
Ausführung: 2 RS
Komplett aus 1.4301 INOX
mit Kunststofflagerbuchse.
Tiger bearing
stainless steel
Design: 2 RS
Completely made of 1.4301
stainless steel with bearing
bush out of synthetic
material.
Bestell-Nummer
45,5 51 14 D
13 d 070.0700
UP H IPB 070.0800
A L T FR FA C C0 Ca C0a Führungsprofile
Baugröße mm mm mm mm mm mm mm kN kN kN kN kN kN
48 56,8 18 18 UP 080.0700 IP 080.0800
TR 050 .0390 52,5 30 33,0 17 5,0 28,0 42 3,5 2 3,7 3,7 2,1 2,1 UP 050.0780
68 72 23 23 UP 090.0700 IP 090.0800
TR 070 .0390 70,1 35 48,0 23 6,5 40,0 54 6,0 3 7,0 7,0 3,8 3,8 UP 070.0780
81 95 31 36 UP 110.0700 IP 110.0800
TR 080 .0390 77,7 40 50,5 23 7,0 39,5 54 7,2 4 7,5 7,5 4,2 4,2 UP 080.0780
110 132 43 50 UP 120.0700 IP 120.0800
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
151 a = Dynamische
C 102 Tragzahl
68 Axiallager
71 / Dynamic load capacity axial bearing
UP 150.0700 C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
BQ - - -.4000
Befestigungsplatte
Technische Daten
Die Befestigungsplatte
ist mit der jeweiligen
Tigerrolle als Baugruppe Rolle / Roller Platte / Plate
verschweißt und fertig TR 070.0380 BQ 4000
montiert. TR 070.0390 BQ 4000
Flange plate
Technical characteristics
The flange plate
is welded with the
respectice combined
bearing and complete
assembled.
94
Rolle / Roller Platte / Plate
TR 070.0380 BR 4100
TR 070.0390 BR 4100
BR - - -.4100
Befestigungsplatte
Technische Daten
Die Befestigungsplatte
ist mit der jeweiligen
Rolle / Roller Platte / Plate Tigerrolle als Baugruppe
TR 080.0380 BR 4100 verschweißt und fertig
TR 080.0390 BR 4100 montiert.
Flange plate
Technical characteristics
The flange plate
is welded with the
respectice combined
bearing and complete
assembled.
95
NEU
Rolle / Roller
STR 070.4200
STR - - -.4200
Tigerrolleneinheit
Edelstahl
Ausführung: 2 RS
Komplett aus 1.4301 INOX
mit Schwerlastkugellager.
96
UP 050.0780
Gewicht/Weight: 5,3 kg/m
Wx: 11,9 cm 3
Wy: 2,5 cm 3
Ix: 38,8 cm 4
Iy: 5,2 cm 4
UP - - -.0780
U-Führungsprofil
Edelstahl
UP 070.0780 Technische Daten
Werkstoff 1.4301
Gewicht/Weight: 10,7 kg/m
Edelstahl
Wx: 32,6 cm 3
Wy: 6,4 cm 3 Fertigungslängen
Ix: 147,6 cm 4 bis 8000 mm
Iy: 16,2 cm 4
U-Profile
stainless steel
Technical characteristics
Material 1.4301
stainless steel
Manufacturing length
up to 8000 mm
UP 080.0780
Gewicht/Weight: 21,0 kg/m
Wx: 81,0 cm 3
Wy: 15,0 cm 3
Ix: 495,0 cm 4
Iy: 38,0 cm 4
97
NEU
Rolle / Roller
AS 040.3800
Ø 40,0 mm
Rolle / Roller
AS 050.3800
Ø 52,5 mm
AS - - -.38 - -
Vulkollanbeschichtete
Rolle / Roller
Kombirolle inklusive
AS 100.3805
Befestigungsplatte
Ø 100,5 mm
Die Vorteile:
- Große Laufruhe
- Geringer Rollwiderstand
- Alterungsbeständig
- Temperaturbeständig
- 30 °C bis + 80 °C
Vulkollan coated
combined bearing Rolle / Roller
with flange plates AS 160.3820
Ø 158,0 mm
The advantages:
- Great damping properties
- Low friction
- Maximum working life
- Compatible with
temperature ranges
- 30 °C up to + 80 °C
Alfa-speed / Alfa-speed
Bestell-Nummer F [N], F [N], Reduzierung der Werte bei Geschwindigkeiten
statisch, radial statisch, axial von
Baugröße 1 m/sec 2 m/sec 3 m/sec
98
NEU
Profil / Profil
UP 040.0724
Rolle / Roller
Platte quadratisch / Plate square
ALFA-Speed bearing
AS 050.3800 BQ 1000 Technical characteristics
The flange plate
is welded with the
respectice combined
bearing and complete
assembled.
Rolle / Roller
Platte rechteckig / Plate rectangular
AS 050.3800 BR 1100
Alfa-speed / Alfa-speed
Profil / Profil
UP 060.3850
AS 060.3800
Vulkollanbeschichtete
Kombirolle inklusive Rolle / Roller
Platte quadratisch / Plate square
Befestigungsplatte
AS 060.3800 BQ 1000
Die Vorteile:
- Große Laufruhe
- Geringer Rollwiderstand
- Alterungsbeständig
- Temperaturbeständig
- 30 °C bis + 80 °C
Vulkollan coated
combined bearing
with flange plates
Rolle / Roller
The advantages: Platte rechteckig / Plate rectangular
Alfa-speed / Alfa-speed
100
NEU
Rolle / Roller
AS 100.3805
Profil / Profil
UP 100.3850
AS 100.38 - -
Rolle / Roller
Platte quadratisch / Plate square
Vulkollanbeschichtete
AS 100.3805 BQ 1050
Kombirolle inklusive
Befestigungsplatte
Die Vorteile:
- Große Laufruhe
- Geringer Rollwiderstand
- Alterungsbeständig
Rolle / Roller - Temperaturbeständig
Platte rechteckig / Plate rectangular - 30 °C bis + 80 °C
AS 100.3805 BR 1150
Vulkollan coated
combined bearing
with flange plates
The advantages:
- Great damping properties
- Low friction
- Maximum working life
Rolle / Roller - Compatible with
Befestigungswinkel / Flange angle temperature ranges
AS 100.3805 BW 1250 - 30 °C up to + 80 °C
Alfa-speed / Alfa-speed
AS 125.38--
Vulkollanbeschichtete
Kombirolle inklusive
Befestigungsplatte
Die Vorteile:
- Große Laufruhe
- Geringer Rollwiderstand
- Alterungsbeständig
- Temperaturbeständig
- 30 °C bis + 80 °C
Rolle / Roller
AS 125.3810 BR 1100
Vulkollan coated
combined bearing
with flange plates
The advantages:
- Great damping properties
- Low friction
- Maximum working life
- Compatible with
temperature ranges
- 30 °C up to + 80 °C
Alfa-speed / Alfa-speed
Profil / Profil
UP 145.3855
AS 145.38 - -
Vulkollanbeschichtete
Kombirolle inklusive
Befestigungsplatte
Vulkollan coated
combined bearing
with flange plates
Vulkollan coated
combined bearing
with flange plates
Alfa-speed / Alfa-speed
TR 090 vollrollig
.0200 88,4 / Zylinderrolle
45 57 30 10,5 / 44cylindrical
13 59 roller
26 20,37 5,10
C = Dynamische Tragzahl Radiallager / Dynamic load capacity radial bearing C0 = Statische Tragzahl Radiallager / Static load capacity radial bearing
Ca = Dynamische Tragzahl Axiallager / Dynamic load capacity axial bearing C0a = Statische Tragzahl Axiallager / Static load capacity axial bearing
104
Bestell- d D C B R r C C0 nmax
Nummer
mm mm mm mm mm mm kN kN min-1
SR 060.150 60 150 73 75 10.000 3 314 . 354 .870 Die mittige Ringnut dient
zur Axialführung der
SR 065.160 65 160 73 75 10.000 3 323 . 361 .750 Zylinderrollen sowie zur
Schmierfettlagerung.
SR 070.180 70 180 83 85 10.000 3 404 . 450 .680 Der Außenring ist ballig
gefertigt.
SR 080.200 80 200 88 90 10.000 4 461 . 524 .580
Auf Wunsch ist auch eine
SR 090.220 90 220 98 100 10.000 4 572 . 684 .470 zylindrische Ausführung
lieferbar.
SR 100.240 100 240 103 105 10.000 4 650 . 790 .390
Supporting roller
SR 110.260 110 260 113 115 10.000 4 748 905 .340
For the employment in
general mechanical
SR 110.200 110 200 63 65 1.000 5 280 300 .250
engineering, material
handling equipment
SR 120.290 120 290 133 135 15.000 4 924 1.140 .290
and metal flattening
machines.
SR 130.310 130 310 144 146 15.000 5 1.122 1.332 .260
The rolling elements are
SR 140.250 140 250 76 78 1.000 5 420 520 .200 saved with lamination
C C0 Ca C0a Führungsprofile rings and lids at the sides.
SR 140.340
kN kN 140 kN 340 kN 160
U-Profil 162 15.000
I-Profil 5 1.353 1.710 .230
The medium ring slot is
SR
24,5140.300
32,5 140 7,5 300 7,5 76 78
UP 050.0726 1.000 5 500 670 .200 for axial guideway and for
lubrication.
SR
31 150.360
35,5 11
150 360 11,5 171
UP 060.0700
173 IP15.000
060.0800 5 1.592 1.890 .200 The outer ring is fabricate
spherical.
45,5 51 14 13 UP 070.0700 IP 070.0800
A cylindrical design on
48 56,8 18 18 UP 080.0700 IP 080.0800 request.
68 72 23 23 UP 090.0700 Stützrolle
IP 090.0800 / Supporting roller
81 95 31 36 UP 110.0700 IP 110.0800
Das Lieferprogramm
umfasst weitere
Abmessungen und
Sonderzinken.
Forks
ISO 2328, ISO 2330
Gabelzinken / Forks
Gabelträgerplatte
komplett als Baugruppe
Gabelträgerprofil
Carriages completely
assembled
Special profile
Gabelträger / Carriages
Gabelträgerplatten Gabelträgerprofile
Bestell-Nummer Auf- max. Last- Bodenfreiheit Höhe Bestell- c d e f
hängung Tragfähigkeit schwerpunkt Nummer
Baugröße Länge mm mm mm mm mm mm
ISO / FEM kg mm Baugröße
A B
GT 460 .- - - 4 5.000 - 10.000 600 127 254 635 GP 180 x 57 19 25,5 180 57
107
Weitere Produkte der Firma wie
®
- Kistenhubgeräte
- Hubstationen,
- Teleskope,
- Linearachsen
- und vieles mehr
finden Sie in unserer Broschüre
AUTOMATION SCHWERLASTSYSTEME.
108
Fordern Sie bitte unsere Broschüre AUTOMATION SCHWERLASTSYSTEME an.
Per E-Mail: mail@alfatec.biz. Oder rufen Sie uns an:
Telefon: +49 (0) 711/ 907 400-0.
Wir helfen Ihnen weiter.
109
alfatec GmbH
Fördersysteme
Alfatec-Straße 1
D-70794 Filderstadt
Tel: +49 (0) 711/ 907 400-0
Fax: +49 (0) 711/ 907 400-25
KK 110
E-Mail: mail@alfatec.biz
www.alfatec.biz