Name: Bob Gronotte Woodworking Aspects of woodworking element Weighting Total Element
Planning Drawings: 20%
1) To scale (_/2) /20 2) Include dimensions (_/2) 3) Include instructions (_/2) 4) 3 sides depicted (_/3) Materials: 1) Minimal quantity used (_/2) 2) Sustainability of wood species is considered (_/1) 3) Species origin is considered (_/1) Design: 1) At least 3 different methods of joinery utilized (_/3) 2) Includes sliding drawer or doors (_/2) 3) Includes at least 2 curved aspects (_/2) /4 Material Jointer: 20% Preparation 1) Face sides jointed (_/2) 2) Face edges jointed (_/2) /10 Planer: 1) Thicknesses consistent with drawings (_/2) Cutting: 1) Cuts are consistent with drawings (_/2) 2) Cuts show no tear-out (_/2) /4 Joinery Fasteners: 20% 1) Hidden from line of sight (_/2) /15 2) Tight (_/2) 3) Do not show through exposed surface of material (_/2) 4) Holes plugged or filled (_/2) Gluing: 1) Joints are strong and tight (_/2) 2) Glue is applied in sufficient quantity (_/2) 3) No glue marks are visible (_/2) 4) Correct type of glue used (_/1) /4 Construction Strength: 20% 1) Project shows suitable strength for purpose (_/2) /10 Summitry: 1) Project is square (_/2) 2) Project is straight (_/2) Function: 1) Project stands without rocking (_/2) 2) Drawers and/or doors operate properly (_/2) /4 Finishing 1) Finish is smooth (_/2) 20% 2) Finish is free of bubbles (_/2) /10 3) Finish is free of runs (_/2) 4) Finish is consistent throughout project (_/2) 5) Finish is appropriate for project use (_/2) /4 Total 100%