VALVE ACTUATORS & CONTROL SYSTEMS
ULLE
| Pos: +
Constructeur: AGIP
Modele : ARNICA 22
SDDG297- SDDG298; SDGHE52
Schema Functionnel:AGIP ARNICA
)
AGIP
ARNICA ol]s are petroleum base (ubricants specially developed for use In
hydrauile systems requiring fluids possessing an extremely high Viscosity Index
and a very low psur point for correct operation (ISO-L-HV classification).
CHARACTERISTICS (ryPrcat FIGURES) f
ARNICA - 15; 22) 32] 4s] 68] 00
Viscosity at 40°C Tmmiys{ asi] 22] 45| 69] 104
Viscosity at 100°C Lmm%s| 38 sz] 6a as] inal “iss
Viscosity Index -[ ass] a75| 26 164] 160) 155
Flash Point COC ec} 158{ sz} 02 245) 218 225!
Pour Point i ec] st] 39) -33) -36 36) =30
[Mess density er 25°C xo] 0,879] 9,857| _0,865| 0,870] 0,878] 0,085,
PROPERTIES AIND PERFORMANCE
°
°
The extremely high Viscosity Index possessed by all grades of AGIP
ARNICA nilnimizes changes In viscosity as a result of temperature
variations.
The VI Imérover adopted Is highly resistant to operating loads, and so thera
Is no appriictable decrease In viscosity during service.
The low ,s0ur point of all grades permits use for a wide range of
applications Including those where low working temperatures are
encountersd.
AGIP ARNICA olls have good thermal and oxidation stability thus ensuring
long life of the oll,
Their higt hydrolitic stability minimizes the formation of sludges In the
presence of water,
AGIP ARNICA olls have good antiwear properties thus ensuring efficiency
and long ! fe of all moving parts of hydraullc circuits. Vanes and ring weight
foss In ths Vickers test Is less than 48 mg. ARNICA 32 passes the 10th
stage of the FZG test, while ARNICA 46 and 68 passes the 11th.
Their antivust properties ensure effective protection and preservation of all
metallic cixmponents in the circult.
They alsc have very good demulisibility, which facilitates spontaneousseparation -2F any water which may become mixed with the oll,
APPLICATIONS:
AGIP ARNICA ails are especially suitable as hydraulic fluld tn;
~ hydraulle and ejestrohydraullc servo controls;
- shock absorber. and other hydraulic equipment subject
to wide temperature variations;
- hydraulle valve;controls;
- hydraullc signailing systems;
+ shipboard equlyjment;
- control gear of jlutomatic hydro-electric Installations.
rs use of AGIP ARNICA olls Is also recommended, as an alternative to normal
h,draulle olls, for the control and power transmission systems of types of
machinery which, due to design or heavy-duty operating conditions, require oils
with an extramel\ high Viscosity Index.
In addition AGIP!ARNICA oils are especially recommended for many delicate and
precision machintis and Instruments where varlatlons In braking torque caused by
changes In viscosity must be contained within the closest possible limits.
SPECIFICATIONS
AGIP ARNICA ollg meet the requirements of the following specifications:
- 180 -L-HV
AFNOR NF E 48103 HV
- BS 4231 NSE .
- DIN 51524 tell {} HVLP (draft)
- CETOP RP 91 HIHV category
- CINCINNATI P-€8, P-69 and P-70
- DENISON HF 0
- VIGKERS M-2980
AGIP ARNICA olls:are approved by the following manufacturers:
- ABEX DENISON:
~ CINCINNATI MILACRON
~ COMMERCIAL HYDRAULICS
- HYDROMATIC (REXROTH)
- LINDE
- SAUER
NCKERS
(1N318.09.96)