Académique Documents
Professionnel Documents
Culture Documents
1, 2
Material /Section / Activity & the 3 Minimum
Method 4, 5 Remarks
Required Tests Frequency
14.3 PILING
ASTM D1143, Minimum of 1 test
14.3.1 Static Load Test BS EN 1997-1 per site
1% of piles
As per concrete
14.3.2 Cube Test
testing requirements
14.3.3 Integrity Test (or Low ASTM D5882 All Piles
Strain Integrity Test)
10-15% of Piles
ASTM D6760, CIRIA 9
Refer to footnote
14.3.4 (Crosshole) Sonic Report 144
Logging Test
9
Footnote 9: Piles bigger than 1000mm diameter shall be tested as per this testing requirement (5 vertical
access tubes shall be attached at constant spacing to the reinforcement cage of the pile). For smaller diameter
piles testing (3 access tubes or as per the Engineer’s discretion)