Académique Documents
Professionnel Documents
Culture Documents
ZTE CORPORATION
No. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://support.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright © 2015 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit the ZTE technical support website http://support.zte.com.cn to inquire for related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
II
III
IV
Intended Audience
This document is intended for the following personnels:
l Commissioning Engineers
l Maintenance Engineers
Chapter/Appendix Summary
Chapter 1, Overview Describes the CSU, interface description, and menu hierarchy.
Chapter 2, Quick Start Describes language setting, password entering, basic parameter
setting and online help query.
Chapter 3, Data Querying Describes data querying, including how to query the real-time
information, real-time alarms, historical records, and version
information.
Chapter 4, Parameters Setting Describes the basic requirements for parameter setting, and how
to modify the parameters.
Chapter 5, Alarm Management Describes the alarm prompts, alarm input/output settings, alarm
controlling, and provides the alarm list.
Chapter 6, Electric Energy Describes energy management functions of the CSU, and the
Management operation procedures.
Chapter 7, Battery Management Describes battery management functions of the CSU, and the
operation procedures.
Chapter 8, Rectifier Management Describes rectifier management, including how to query the
information, modify parameters, set the rectifier address, control
the rectifiers.
Chapter 9, Generator Describes how to set the starting mode of the generator and how
Management to start and shut down the generator.
Chapter 11, Maintenance Describes maintenance management, including how to control the
Management operating rectifiers, and manage the data with a USB Drive.
Chapter 12, Web Monitoring Describes the CSU web page and how to log in to it.
Function
Appendix A, Parameter List Provides the parameter lists, including lists of system parameters,
battery parameters, and SNMP parameters.
Conventions
This manual uses the following typographical conventions:
Typeface Meaning
II
Functions
l Management
à Supports the battery charging, discharging and test management.
à Supports automatic sleep of the rectifiers and thereby saves energy.
à Supports the export of history records through a USB flash drive.
à Supports data query, parameter setting and system control through the LCD.
l Alarm
When faults occur on the power system, the CSU reports alarms and takes protection
measures.
l Monitoring
à Collects the operation data of the power system and monitors its operating status
in real time.
à Transmits data to the supervision center (SC), and monitors the power system
remotely in accordance with the orders received from the SC.
l Wireless communication
Supports GPRS network mode, having SMS notice and the E-mail notice function.
l Web functions
After the CSU is connected to the network, you can access the CSU by using IE7 or
a later version.
1-1
Appearance
For the appearance of the CSU500B, see Figure 1-1.
Interfaces
l USB interface
à Supports USB flash drives but does not support SD card or other portable storage
devices, such as portable hard disks, MP3 or MP4.
à The system format of the USB files is FAT.
l RJ45 Ethernet interface
à The Ethernet interface rate is 10M/100M (adaptive).
Indicators
The indicators display the operational status of the CSU and the system. For a description
of indicators, refer to Table 1-1.
Indicator
Operational Status
Power Run Alarm
• "-" means that the status of the indicator is not relevant to the condition.
1-2
Buttons
User can query the information and set the parameters through the menu buttons.
For a description of the functions of CSU buttons, refer to Table 1-2.
<◄+▲> – The user could press the ◄ button and the ▲ button
to enter Language Setting menu.
<▲+Ent> – The user needs to press the ▲ button and the Ent
button at the same time, it displays help information
of the current menu.
1-3
His. Record Used to query the history alarms, history events and
different types of statistics data.
U-Disk Data Mng. Used to export the history records onto a USB flash
drive.
1-4
Submenu
After moving the cursor to an icon, you can press Ent to open the submenu pages
hierarchically. For the list of the submenus, refer to 1.3 Menu Hierarchy.
This section takes the Load page and the CSU page as the example. The submenu pages
are shown in Figure 1-3.
Screen Saver
The CSU automatically switches to the screen saver interface if no operation is performed
for 10 minutes.
The screen saver interface is shown in Figure 1-4. The interface displays the system time
of the CSU, and the DC output voltage (V) and output current (A) of the power system.
You can press any key to exit the screen saver interface.
1-5
l CSU Msg.
Load, Ten. P, CSU, Battery, AC, ENV, Auto Event
Real Msg.
l SMR Msg.
l BMU Msg.
l ACEM Msg.
l SDU Msg.
Real Alm.
l System Para.
l Batt.Para.
Para.Set
l SMR Para.
l Alm.Attr.
Alarm Grade, Relay
l In-Relay Attr.
l SNMP Para.
l SMS Para.
l Email Para.
l Batt.Manage
Start Float, Start Equal, Start Test, Start Batt.Det.
Ctrl.
l SMR Ctrl.
SMR Sleep, SMR Waken, SMR Fan Ctrl.En., SMR Fan Ctrl.Dis.
l Save Ctrl.
Auto Save Ctrl., Temp.NonSave Ctrl., Perm.NonSave Ctrl., Manual
Detect
l Alm.Ctrl.
Total Alm.Dis., Total Alm.En.
l GEN Ctrl.
Turn On GEN, Turn Off GEN
l Dev.Stat.
1-6
l His.Alm.
l Event
His.Record
l Equal
l Test
l Disch.
l Peak
l Maintain
l P.F.Times
l P.F.Time
l Disch. Stat.
l Batt.Temp.
l Ten. Hr. P.
l Ten. Day. P.
l Ten. Mon. P.
l Ten. Ann. P.
l Ten. Total P.
l Batt. Sw. R
l Real Msg.
l Real Alm.
SMR Query
l Para.Set
l Ctrl.
l Version
l System Time
l Network
Local Set
l Language
l LCD Contrast
Export His.Rec.
l Exp.His.Alm.
U-Disk Data Mng.
l Exp.His.Data
l Exp.Test Rec.
l Exp.Event Rec.
l Exp.Equ.Rec.
l Exp.Disc.Rec.
l Exp.Maint.Rec.
l Exp. Hr. Ten. P. Rec.
l Exp. Day. Ten. P. Rec.
l Exp. Mon. Ten. P. Rec.
l Exp. Ann. Ten. P. Rec.
l Exp. Total. Ten. P. Rec.
l Exp.All Rec.
1-7
l System Version
l SMR Version
Version
l OS Version
l BMU Version
l IOB Version
1-8
Tips:
l You can press ◄ and ▲ at the same time in main menu interface, enter the language
setting page.
l You can select > Language to enter the page for language setting.
l Para. Set
l Ctrl.
l Local Set
l U-Disk Data Mng.
2-1
The default password is "0000". You only need to press the Ent button to pass the
authentication.
If the password is modified, perform the following steps to enter the password.
1. Press the ► or the ◄ button to move the cursor.
2. Press the ▼ or the ▲ key to set the number.
3. Press the Ent button to confirm the password (pressing the Esc button quit the
password authentication page).
Caution!
Incorrect system time results in time errors in CSU regular management and history
records.
Operation Guide
2-2
Caution!
The CSU cannot perform effective management over batteries due to incorrect battery
configuration.
2-3
1 Battery Cap. -1# 300 Ah Set the two parameters in accordance with actual
capacity of each battery branch.
2 Battery Cap. -2# 300 Ah
For example, if the battery branch 1 is equipped with
3 Battery Cap. -3# 0
a 300 Ah battery pack, set "Battery Cap. -1#" to "300
4 Battery Cap. -4# 0 Ah". If the battery branch 1 is equipped with two 150
Ah battery packs that are connected in parallel, set
"Battery Cap. -1#" to "300 Ah", which is the sum of
two battery packs.
If a battery branch is equipped with no battery, set the
corresponding battery capacity to "0 Ah". An incorrect
battery capacity setting will cause the CSU to fail to
manage the batteries.
5 Float Voltage 53.5 V Float charging voltage of battery packs, set this
parameter in accordance with the battery charging
characteristics.
For how to modify the "Battery Cap. -2#" parameters, see Figure 2-4.
2-4
2-5
2-6
Operation Guide
This section takes querying load and CSU information as an example for illustration, see
Figure 3-1.
Tips:
l You can press ► or ◄ to switch between submenu pages, for example, switching
between the Load page and the CSU page.
3-1
l You can press ▼ or ▲ to page down or page up to view the information page, for
example to view the first CSU page or the second CSU page.
Page Description
For the system information submenu description, refer to Table 3-1.
Table 3-1 System Information Submenu Page
1 Load
2 CSU
3-2
3 Battery
Displays the working status of each battery pack is displayed. The above
figure shows the "Battery-1#" page. You can press the ► key to switch to the
Battery-2#, Battery-3#, Battery-4# page.
l Volt. : Terminal voltage of a battery pack.
l Middle Volt. : Voltage of the middle of batteries. The middle voltage is 0
when the middle voltage detection wire is not connected.
l Curr. : Current of a battery pack. Positive value means the battery pack is
in charging, and negative value means the battery pack is in discharging.
3-3
l If the AC input mode is L1/N (220 V), the voltage and current of a phase
are displayed.
l If the AC input mode is L1/L2/L3 (110 V), three line voltage and three
line current are displayed.
l If the AC input mode is L1/L2 (110 V), one line voltage and one line
current are displayed.
3-4
5 ENV
6 Auto Event
l Next Equal Time: Time for the next equalization charging, which is
related to the regularly auto equalization charging.
l Next Test Time: Time for the next battery test, which is related to the auto
battery test. If "No Set" is displayed, it means the regularly auto battery
test is not enabled.
l Next Det. Time: Time for the next battery detect, which is related to
the auto battery detect. If "No Set" is displayed, it means the regularly
auto battery detect is not enabled.
l Next Rotate Time: Time for the next rectifier rotation (in ECO mode).
Note:
Online rectifiers refer to the rectifiers that can communicate with the CSU.
3-5
Operation Guide
The operation process is shown in Figure 3-2.
Tips:
l You can press ► or ◄ to switch between rectifiers, for example, switching between
the "SMR-1#" rectifier and the "SMR-14#" rectifier.
l You can press ▼ or ▲ to scroll up or down the information page.
Page Description
A rectifier has six information pages indicating its output, input and operating status. This
section takes the "SMR-1#" rectifier as the example. For the descriptions of the information
page, refer to Table 3-2.
Note:
“SMR-1#” indicates that the rectifier address is "1". If the rectifier address is different from
the cabinet slot number, you should modify the rectifier address by referring to "8.2 Setting
the Address for a Rectifier".
3-6
3-7
Operation Guide
The process of querying the battery monitoring unit (BMU) information is shown in Figure
3-3.
Tips:
You can press ▼ or ▲ to scroll up or down the information page of batteries.
Page Description
The battery group comprises 12 V batteries, see Figure 3-4.
3-8
Operation Guide
The operation process is shown in Figure 3-5.
Tips:
l You can press ► or ◄ to switch between submenu pages, for example: switching
between the AC page and the AC-1# page.
l You can press ▼ or ▲ to page up or down the information pages of a submenu.
Page Description
For the descriptions of the information pages of the ACEM, see Table 3-3.
1 AC
2-4 AC-1# -
AC-3#
3-9
Operation Guide
The operation process is shown in Figure 3-6.
Tips:
You can press ▼ or ▲ to view the real-time alarms one by one.
Page Description
The real-time alarm page is shown in Figure 3-7. In this example, there are totally 11
real-time alarms, and one page displays one alarm.
You can query the alarm name, occurrence time, level and output relay point. For
specifications of the alarm names and output relay points, refer to "5.5 Alarm List".
You can press the Ent button on the real-time alarm page to open the fault diagnosis page
which guides you how to clear the fault, see Figure 3-8.
3-10
Operation Guide
The operation process is shown in Figure 3-9.
Tips:
l You can press ▼ or ▼ to view the history alarms one by one.
l If there are more than 100 records in the result, you can press ► or ◄ to jump pages
(jump 100 records each time).
Page Description
The history alarm page is shown in Figure 3-10. In this example, there are totally 257
history alarms, and one page displays one alarm.
You can query the alarm occurrence time, clearance time, name and level. For the
specifications of the alarm name, refer to "5.5 Alarm List".
Operation Guide
The operation process is shown in Figure 3-11.
3-11
Tips:
l You can press ▼ or ▲ to view the event records one by one.
l If there are more than 100 records, you can press ► or ◄ to jump pages (jump 100
records each time).
Page Description
The event record page is shown in Figure 3-12. In this example, there are 33 event records,
and one page displays one record.
Operation Guide
The operation process is shown in Figure 3-13.
3-12
Tips:
l If there are more than 100 records, you can press ► or ◄ to jump pages (jump 100
records each time).
l After selecting the record number, you can press Ent to open the information pages
of the record.
l You can press ▼ or ▲ to page up or down the information.
Page Description
There are nine information pages for each equalization charging record. This section
takes the first equalization charging record as the example. For the descriptions of the
information pages, refer to Table 3-4.
3-13
2/9 l Init. Cap. Rate: Displays the capacity percentage of the four
branches of battery groups when the equalization charge starts.
l Final Cap. Rate: Displays the capacity percentage of the four
branches of battery groups when the equalization charge ends.
l Chg. Cap. Rate: Displays the capacity percentage change
of the four branches of battery groups when the equalization
3/9
charge ends.
Chg. Cap. Rate = Final Cap. Rate - Init. Cap. Rate.
l Init. Batt. Volt. : Displays the voltage of the four branches of
battery groups when the equalization charge starts.
l Fina. Batt. Volt. : Displays the voltage of the four branches of
5/9
6/9
7/9
3-14
9/9 Equ. Stop Cause: Reason for stopping the current equalized
charging.
l Manual: Quitting the equalized charging through the CSU.
l SC: Quitting the equalized charging through the back-ended
NMS.
l TimerFault: CSU timer is faulty.
l SMR None: The rectifier is faulty.
l PowerOff: Mains failure.
l Batt. Curr. Fault: The current of the battery pack is abnormal.
l Batt. Volt. Fault: The voltage of the battery pack is abnormal.
l Batt. Fault: The battery pack is faulty.
l Batt. Temp. Fault: The temperature of the battery pack is
abnormal.
l Env Temp.Fault: The environmental temperature is abnormal.
l Max Time: Maximum time of the equalized charging.
l Duration: Duration of the end of the equalized charging.
l Fixed-time: Duration of ordered equalized charging.
l Disabled: The equalized charging is disabled.
Operation Guide
The operation process is shown in Figure 3-14.
3-15
Tips:
l If there are more than 100 records, you can press ► or ◄ to jump pages (jump 100
records each time).
l After selecting the record number, you can press Ent to open the information pages
of the record.
l You can press ▼ or ▲ to page up or down the information pages.
Page Description
Each test record has nine information pages. This section takes the first record as the
example. For the descriptions of the page, refer to Table 3-5.
2/9
l Init. Cap. Rate: Displays the capacity percentage of the four
branches of battery groups when the battery test starts.
l Final Cap. Rate: Displays the capacity percentage of the four
branches of battery groups when the battery test ends.
l Chg. Cap. Rate: Displays the capacity percentage change of
3-16
3/9 the four branches of battery groups when the battery test ends.
Chg. Cap. Rate= Final Cap. Rate - Init. Cap. Rate
l Init. Batt. Volt. : Displays the voltage of the four branches of
battery groups when the battery test starts.
l Final Batt. Volt: Displays the voltage of the four branches of
battery groups when the battery test ends.
4/9
5/9
6/9
7/9
3-17
9/9 Test Stop Cause: Reason for stopping the current battery test.
l Manual: Manually quitting the battery test through the CSU.
l SC: Manually quitting the battery test through the back-ended
NMS.
l TimerFault: The CSU timer is faulty.
l SMR None: The rectifier is faulty.
l Batt. Curr. Fault: The current of the battery pack is abnormal.
l Max Time: Maximum duration of the battery test.
l Batt. Volt. : The voltage of the battery pack is abnormal.
l Batt.Cap: The capacity of the battery pack is too low.
l Reset: Resetting the CSU.
l PowerOff: AC power failure.
l Batt. Fault: The battery pack is abnormal.
Operation Guide
The operation process is shown in Figure 3-15.
Tips:
l If there are more than 100 records, you can press ► or ◄ to jump pages (jump 100
records each time).
l After selecting the record number, you can press Ent to open the information pages
of the record.
l You can press ▼ or ▲ to page up or down the information pages.
3-18
Page Description
Each discharge record has eight information pages. This section takes the third battery
discharge record as the example. For the descriptions of the information pages, refer to
Table 3-6.
5/8
6/8
3-19
7/8
Note:
If the CSU is reset, the system clears the former records and re-records the peak values.
Operation Guide
The operation process is shown in Figure 3-16.
Tips:
3-20
l You can press ► or ◄ to switch between submenu pages, for example, switching
between the AC-1# page and the AC-2# page.
l You can press ▼ or ▲ to page up or down the information pages of a submenu, for
example, switching between the two pages of the AC-1# page.
Page Description
For the descriptions of the submenu pages of the peak value records, refer to Table 3-7.
1 AC-1#
2 AC-2#
3 AC-3#
4 Load
3-21
5 Battery
6 Battery-1#
7 Battery-2#
8 Battery-3#
9 Battery-4#
There are totally four branches of battery groups, and each line has five
pages of peak value records. This section takes the first line of the battery
groups as the example.
Page 1/5: Maximum voltage value of the batteries.
Page 2/5: Maximum value of the charging current.
Page 3/5: Maximum value (absolute value) of the discharging current.
Page 4/5: Maximum value of the battery temperature.
Page 5/5: Minimum value of the battery temperature.
10 ENV
Note:
The time on the pages indicate the occurrence time of the peak values. If "Invalid" is
displayed for a peak value, it indicates that the system fails to obtain the corresponding
data.
3-22
Operation Guide
The operation process is shown in Figure 3-17.
Tips:
l You can press ► or ◄ to switch between pages.
l You can press ▼ or ▲ to page up or down the information pages of a record.
Page Description
A maintenance record has 15 information pages. For the descriptions of the information
pages, refer to Table 3-8.
Table 3-8 Information Pages of Maintenance Records
1/15
3-23
2/15-15/15
Displays the detection result of the rectifiers (1# rectifier to 40# rectifier).
l If the result is "Normal", it indicates that the rectifier is operating properly.
l If the result is "Invalid", it indicates that the rectifier is incapable of providing
power.
Tips:
You can press ► or ◄ to switch between pages of the power-off times statistics record.
3-24
Tips:
l You can press ► or ◄ to switch between various battery groups.
l You can press ▼ or ▲ to page up or down the record of a battery group.
Page Description
For the descriptions of the statistics submenus and corresponding pages, refer to Table
3-9.
3-25
Operation Guide
Query methods for all power consumption statistics records are the same. This section
takes the statistics record "Ten. Hr. P." as an example, and the operation guide is as
follows:
3-26
Tips:
l "2015040719-205#" indicates the power consumption statistics of tenants at 19:00 on
April 7, 2015.
l After selecting a statistical period, you can press the Ent key to open the detailed
power consumption statistics information page of tenants during this period.
l You can press ▼ or ▲ to page up or down the detailed records.
Page Description
For the descriptions of the statistics submenus and the corresponding information pages,
refer to Table 3-10.
Ten. Hr. P.
3-27
Ten. Day. P.
Ten. Mon. P.
Ten. Ann. P.
3-28
l "2015#" indicates the year 2015. This record displays the power consumption
of tenants within this year.
Ten. Total P.
Each record has seven pages, which displays the total power consumption of
tenants since the system is powered on.
Operation Guide
For the operation procedure of querying battery switching records, see Figure 3-21.
Tips:
l If there are more than 100 battery switching records, you can press ► or ◄ to quickly
page up or down records. You can jump over 100 records at one time.
l After selecting the record No. of a battery switching operation, you can press the Ent
key to display the detailed information of this record.
3-29
Page Description
For the pages of battery switching records, see Figure 3-22.
Each battery switching record includes the starting time, ending time, switching source,
and switching direction of a battery switching operation.
Operation Guide
This section takes the rectifier version as the example, and the operation guide is as
follows:
l Menu path: > SMR Version.
l Operation procedure: See Figure 3-23.
Tips:
3-30
l You can press ► or ◄ to switch between battery groups, for example, switching
between the "SMR-1#" and the "SMR-8#".
l You can press ▼ or ▲ to page up or down the version information pages of a battery
group.
Page Description
For the descriptions of the version submenus and the corresponding information pages,
refer to Table 3-11.
System Version
SMR Version
The figure above shows the version information of the 1# rectifier. You can
press ► to view the version information of other rectifiers.
OS Version
BMU Version
The figure above shows the version information of the 1# BMU. You can press
► to view the version information of other BMUs.
3-31
IOB Version
Note:
Version information varies with the upgrade of the product. The version information in this
manual is only for reference.
3-32
4-1
1 Port Baudrate 9600 bps This parameter value and the serial port rate of
the transmission equipment should be consistent,
otherwise the power device cannot communicate with
the main equipment.
2 Device Addr. -1# 1 l If only one power device is connected to the serial
port of the main equipment, there is no need to
modify this parameter.
l If multiple power devices are connected to the
transmission equipment through the same serial
port, you should modify this parameter to allocate
different addresses to these power devices.
Note: If multiple power devices are connected to the
same serial port, the addresses of these devices must
be different, otherwise communication between power
devices and transmission equipment fails.
4-2
Operation steps:
l For how to set parameters in > System Para., see Figure 4-1.
l For how to set parameters in > Network > Network Type, see Figure 4-2.
l For how to set parameters in > Network > Wire Network, see Figure 4-3 (using
modifying "Local IP Mode" and "Local IP" as an example).
4-3
Operation tips:
l After finish modifying the parameters in > Network > Wire Network, press ESC
to quit, save the modification in the new page.
l "Local IP" can be modified only when "Local IP Mode" is set to "Static".
4-4
Operation Steps:
l For how to set parameters in > Network > Network Type, see Figure 4-2.
l For how to set parameters in > Network > Wire Network, see Figure 4-3 (using
modifying "Local IP Mode" and "Local IP" as an example).
4-5
1 The power system and the SC should be The power system serves as the server, the SC
in the same LAN. serves as the client.
2 The power system is in the LAN and the The power system serves as the client, the SC
SC is in the public network. serves as the server.
3 The power system and the SC should be The power system serves as the client, the SC
in different LANs. serves as the server.
4 The power system and the SC are both The power system serves as the client, the SC
in the public network. serves as the server.
5 The power system is in the public The power system serves as the client, the SC
network and the SC is in the LAN. serves as the server.
• The power system serves as the server, and the supervision center actively initiates the TCP conne
ction.
• The power system serves as the client, and the power system actively initiates the TCP connection.
Set communication parameters in accordance with the roles that the power system plays
in the networking.
l For how to set communication parameters when the power system serves as the
server, see Table 4-5.
l For how to set communication parameters when the power system serves as the
client, see Table 4-6.
Table 4-5 Communication Parameters Setting When the Power System Serves As
the Server
4-6
Table 4-6 Communication Parameters Setting When the Power System Serves As
the Client
3 Net Connect Type Short Link Set the parameter to "Long Link".
For how to set parameters in > System Para., see Figure 4-1.
Caution!
When modifying the port number, ensure that the port to be used is not occupied.
Note:
The SNMP network only applies to the mode in which the power device and SC are in the
same LAN.
4-7
1 MODEM No Default
Exsit
5 Mask 255.255.255.000 When "Local IP Mode" is set to "Static", set this parameter
to the subnet mask of the current network.
6 Gateway 192.168.001.001 When "Local IP Mode" is set to "Static", set this parameter
to the gateway address of the current network.
Operation Steps:
l For how to set parameters in > Network > Network Type, see Figure 4-2.
l For how to set parameters in > Network > Wire Network, see Figure 4-3 (using
modifying "Local IP Mode" and "Local IP" as an example).
4-8
6 SNMPV3 Auth. Pass 12345678 sure the corresponding port is not be occupied.
Note:
The wireless MODEM must be configured with a SIM card for accessing the network. The
wireless MODEM and SIM card are prepared on your own.
4-9
Operation Steps:
l For how to set parameters in > Network > Network Type, see Figure 4-2.
l For how to set parameters in > Network > Wireless Net., see Figure 4-5.
4-10
For how to set parameters when the power system serves as the client, see Table 4-6.
Operation Guide:
4-11
l For how to set parameters in > Network > Network Type, see Figure 4-2.
l For how to set parameters in > Network > Wire Network, see Figure 4-3 (using
modifying "Local IP Mode" and "Local IP" as an example).
Note:
During the SMS sending, the GPRS communication is interrupted for a while, and when
the short message is sent, the GPRS communication restores.
4-12
5 SMS Number-1# - Enter the cell phone numbers that receive the
message sent from the CSU.
6 SMS Number-2# -
Three cell phone number at most.
7 SMS Number-3# -
4-13
3 Mail Serv. Port 25 Set to the port number of the mailbox server.
7 Recipent Addr. -1# - Enter the address of mailbox that receives the
E-mail, three at most.
8 Recipent Addr. -2# -
10 Reverse Path - Enter the address of the mailbox that receives the
replies.
This address must be consistent with the login
mailbox and user name, for example, if "mailbox
server address " is smtp.163.com and "mailbox user
name" is A, the address of the mailbox that receives
the replies must be "A@163.com".
4-14
To improve the display effect, you can modify the LCD contrast in accordance with the
following guide:
4-15
4-16
l When a critical or a major alarm occurs, the CSU sounds. For the critical alarm, the
CSU sounds quickly. You can press any button of the CSU to stop the alarm sound. If
the fault that causes the alarm is not troubleshot within half an hour, the CSU sounds
again.
l When a warning alarm occurs, the indicator of the CSU flashes slowly.
l When a non-mask alarm occurs, the CSU displays alarm information and reports the
information to the SC.
l When a non-mask alarm occurs, the related output relay performs an action.
5-1
This section takes the operation to set the output relay for "LLVD1 Alarm" as an example.
The detailed operation is as follows:
5-2
Operation Guide
This section takes modifying "In-Relay Attr.-1#" as an example for illustration. The detailed
operation is as follows:
1 Total Alm. Dis. Used to disable all the alarms. When an alarm occurs, the system
does not display the alarm prompt.
5-3
2 Total Alm. En. Used to enable all the alarms. When an alarm occurs, the system
displays the alarm prompt.
5-4
4 Batt.Det.Abr. Critical None The battery voltage is lower than Test Stop
Volt. in the process of the battery test.
5 BLVD Alarm Critical None The system disconnects the batteries, and
also disconnects the BLVD loads at the
same time.
8 All Alarm Blocked Critical None The system does not display any real-time
alarms. This can be set through Alm.Ctrl.
9 Batt. Equal Mask None The system charges the batteries in boost
(equalization) charge mode.
10 BMU Comm. Fail Major None The Battery Monitoring Unit (BMU) fails to
communicate with the CSU.
11 BLTD Alarm Critical None When the battery temperature is lower than
BLTD Temp., the system disconnects all
the battery input branches.
13 Sys.OverLoad Alm. Critical None The load capacity exceeds the load
capability of the system.
15 IOB Comm. Brk. Major None The communication between the IO board
and the CSU is interrupted.
AC Alarms
5-5
22 AC Phase Lack Major None The AC input lacks one phase or two.
25 AC Out.SW Off Major None The auxiliary AC output circuit breaker trips.
28 ACEM Comm. Brk. Major None The communication between the AC energy
meter and the CSU is interrupted.
Rectifier Alarms
5-6
41 PFC Out.V.L. Major A2 The output voltage of PFC is lower than the
threshold (345 V).
42 SMR EEPROM Major A2 Errors occur when the rectifier reads and
writes the EEPROM.
45 PFC Input C.H. Major A2 The PFC input current is higher than the
threshold.
46 SMR Start Abr. Major A2 The starting time of the rectifier exceeds 5
minutes.
5-7
DC Alarms
Environment Alarms
5-8
5-9
5-10
Operation Guide
Query methods for all power consumption statistics records are the same. This section
takes the statistics record "Ten. Hr. P." as an example, and the operation guide is as
follows:
l Menu path: > Ten. Hr. P..
l Operation procedure: See Figure 6-1.
Tips:
l "2015040719-205#" indicates the power consumption statistics of tenants at 19:00 on
April 7, 2015.
6-1
l After selecting a statistical period, you can press the Ent key to open the detailed
power consumption statistics information page of tenants during this period.
l You can press ▼ or ▲ to page up or down the detailed records.
Page Description
For the descriptions of the statistics submenus and the corresponding information pages,
refer to Table 6-1.
Ten. Hr. P.
Ten. Day. P.
6-2
Ten. Mon. P.
Ten. Ann. P.
Ten. Total P.
Each record has seven pages, which displays the total power consumption of
tenants since the system is powered on.
6-3
Tips
To select an item, press ▼ or ▲. To apply the configuration, press Ent.
Page Description
For a description of the parameters, refer to Table 6-2.
Operation Guide
l Menu path: > System Para. >
Ten.Div.Ratio-1#/Ten.Div.Ratio-2#/Ten.Div.Ratio-3#/Ten.Div.Ratio-4#/
l Operation procedure: See Figure 6-3.
6-4
Tips:
Page Description
For a description of the parameters, refer to Table 6-3.
1 Ten.Div.Ratio-1#
6-5
2 Ten.Div.Ratio-2#
3 Ten.Div.Ratio-3#
4 Ten.Div.Ratio-4#
Tips
6-6
Page Description
For a description of the parameter, refer to Table 6-4.
Table 6-4 Parameter Description for Setting the Meter Reading Date
6-7
6-8
Working Principles
During the battery discharging, when the battery voltage drops to the power-off threshold,
the CSU cuts the power-off contactor, and the corresponding loads or batteries are
powered off.
When the mains supply and the rectifiers are in the normal status again, the CSU closes
the contactor and re-connects the branch that the unit cut, and the power supply for the
corresponding load group resumes.
Note:
The battery voltage is the first judging condition for the power-off protection. You can
modify the "Disconnect Mode" and set the power-off time or the battery remaining capacity
as the second judging condition.
7-1
Related Parameters
For a description of the parameters related to LLVD1, LLVD2 and BLVD, refer to Table 7-1.
These parameters are closely related to the battery specifications, and the default values
of the parameters may vary with the battery models.
Caution!
When a system does not provide a load/battery disconnection function, set the
corresponding function-enabled parameter to "Disabled". For example, when a system
does not provide the BLVD function, set "BLVD Enabled" to "Disabled". Failure to comply
can result in a false alarm.
LLTD
To protect the load equipment from operating at low temperature, the CSU supports the
load low temperature disconnect (LLTD) function.
l The LLTD working principles are as follows:
When the environment temperature is lower than "LLTD Env.Temp. ", the CSU
disconnects the first power-off contactor and the secondary power-off contactor. All
the LLVD1 loads and LLVD2 loads are powered off. However, the CSU does not
control the battery power-off contactor, and therefore cannot support the battery low
voltage disconnect (BLVD) function.
l How to enable the LLTD function?
7-2
By default, the system disables the LLTD function. For the modification of related
parameters, refer to Table 7-2.
LLTD Env.Temp. -15 °C Set based on the allowed lowest working temperature
of the equipment. It is recommended to use the default
value.
BHTD
The BHTD function prevents batteries from damages caused by operating at high
temperature. The high temperature refers to the battery temperature instead of the
environment temperature.
l The BHTD working principles are as follows:
When the battery temperature is higher than "BHTD Temp. ", the CSU disconnects
the batteries.
l How to enable the BHTD function?
By default, the system disables the BHTD function. For the modification of the related
parameters, refer to Table 7-3.
BHTD Temp. (°C) 50 °C Set based on the allowed highest working temperature.
If there is no special requirement, it is recommended
to use the default value.
BLTD
The BLTD function protects the batteries from damages caused by operating at low
temperature. The low temperature refers to the battery temperature instead of the
environment temperature.
l The BLTD working principles are as follows:
When the battery temperature is lower than "BLTD Temp." , the CSU disconnects the
batteries.
l How to enable the BLTD function
By default, the system disables the BLTD function. For modifications of the related
parameters, refer to Table 7-4.
7-3
BLTD Temp. -15 °C Set based on the allowed lowest working temperature.
If there is no special requirement, it is recommended
to use the default value.
Note:
You can select > Equal to query the equalization charging records of the power system.
Basic Parameters
For the basic parameters related to the battery charging, refer to Table 7-5.
7-4
Equalized Enabled Enabled To decide whether the system can carry out the
equalization charging management. Set to "Enabled".
Table 7-6 Parameter Setting Requirements for Enabling the Regular Equalization
Charging
Table 7-7 Parameter Setting Requirements for Enabling the Equalization Charging
Reservation
7-5
l Temp.Volt.Max./Temp.Volt.Min.
Default value of "Temp.Volt.Max.": 57.5 V
Default value of "Temp.Volt.Min.": 50.0 V
The system can enable the temperature compensation only when the charging voltage
is within the range (50.0 V to 57.5 V).
l Volt.Temp.Coeff./Standard temperature for the compensation
The default value of this parameter is 3mV/°C/cell, which means that the charging
voltage of each battery cell changes by 3 mV when the battery temperature changes
by 1 °C.
The standard temperature for this compensation is 25 °C. Within this range, the
charging voltage decreases when the battery temperature rises above 25 °C and
increases when the battery temperature drops below 25 °C.
l Curr.Temp.Coeff.
The default value of this parameter is 0.
When the battery temperature rises, the charging current should be decreased, or
the battery useful life will affected. Therefor, the CSU performs the battery charging
current temperature compensation. When the battery temperature drops below
the standard temperature for the compensation, the CSU stops the temperature
compensation.
7-6
Caution!
To ensure the load capability of the battery group, you should not test the batteries
frequently.
Basic Parameters
For the basic parameters of the battery test management, refer to Table 7-8.
7-7
Test Stop Volt. 46.0 V When the voltage of the battery group reaches the value of the
test stop voltage, the system stops the test.
Test Stop Cap. 0.77 C10 When the capacity of the battery group reaches the value of
the test stop capacity, the system stops the test.
Test Period 0 day It should be set based on the maintenance requirements of the
battery, for example, set to "30 days".
The period starts from the last battery test date (including
manual starting of the battery test).
Note: If it is set to "0 day", it indicates that the system disables
the periodical test function.
Test Start Time 10:00 It is recommended to test the batteries during working hours.
7-8
You can select > Batt. Para. > Batt. Det. Period to set battery detection period.
The system will automatic start battery detection when the battery detection conditions
satisfied.
Note:
You can select > CSU Msg. to query "Next Dec. Time" in Auto Event page.
7-9
Tips:
l To move the cursor when setting a parameter, press ► or ◄.
l To change the value when setting a parameter, press ▼ or ▲.
l After apply the setting, press Ent.
7-10
Tips:
To select an item, press ▼ or ▲. To apply the configuration, press Ent.
Tips:
To select an item, press ▼ or ▲. To apply the configuration, press Ent.
7-11
Tips:
l To move the cursor when setting a parameter, press ► or ◄.
l To change the value when setting a parameter, press ▼ or ▲.
l After apply the setting, press Ent.
7-12
Caution!
Because query of the rectifiers influences the address competition of the CAN bus, you
must not install a rectifier during the query. To install a rectifier, ensure that you return to
the CSU main interface.
Select to open the menu pages of the online rectifiers, see Figure 8-1.
8-1
Note:
"SMR-1#" represents the rectifier whose address is "1". If the rectifier address is different
from the slot number, you should modify the address according to the slot number.
8-2
Warning!
Do not install other rectifiers when setting rectifier addresses.
Steps
1. Verify the rectifier address.
For how to verify the rectifier address, see Figure 8-6.
Figure 8-6 Ensuring the Slot Number and Rectifier Address Are Consistent
2. If the rectifier address and slot number are not consistent, modify the rectifier address.
The following procedure describes how to modify "Rectifier -1#" to "Rectifier -2#", see
Figure 8-7.
8-3
Caution!
Because modification of the rectifier parameters may influence the operation of the system,
be careful in operation.
Parameter Description
For the descriptions of the parameters, refer to Table 8-1.
8-4
Operation Guide
This section takes setting the default output voltage of the rectifiers as the example.
Related Menus
For the descriptions of the related menus, refer to Table 8-2.
3 Fan Ctrl. En. Used to enable the fan speed control function. With this function,
the fan inside a rectifier can automatically adjust its speed based
on the fan temperature.
8-5
4 Fan Ctrl. Dis. Used to disable the fan speed control function.
Operation Guide
This section takes setting "SMR Sleep" as the example.
8-6
Operation Guide
The operation guide for setting the "Generator Mode" is as follows:
9-1
9-2
Tips:
To select an item, press ▼ or ▲. To apply the configuration, press Ent.
Tips:
To select an item, press ▼ or ▲. To apply the configuration, press Ent.
Tips:
l To move the cursor when setting a parameter, press ► or ◄.
l To change the value when setting a parameter, press ▼ or ▲.
l After apply the setting, press Ent.
9-3
Tips:
l To move the cursor when setting a parameter, press ► or ◄.
l To change the value when setting a parameter, press ▼ or ▲.
l After apply the setting, press Ent.
Tips:
l To move the cursor when setting a parameter, press ► or ◄.
l To change the value when setting a parameter, press ▼ or ▲.
l After apply the setting, press Ent.
9-4
Tips:
l To move the cursor when setting a parameter, press ► or ◄.
l To change the value when setting a parameter, press ▼ or ▲.
l After apply the setting, press Ent.
Tips:
l To move the cursor when setting a parameter, press ► or ◄.
l To change the value when setting a parameter, press ▼ or ▲.
l After apply the setting, press Ent.
9-5
9-6
Note:
In any operational mode, the rectifiers reach their current limit and decrease their output
voltage if the load current is higher than the sum of the rated current of all operating
rectifiers. As a result, the batteries will be discharged.
Save Mode
Save mode (energy-saving mode) is a high-efficiency mode. It can ensure that the rectifier
efficiency is always at the peak to save more power. In the Save mode, three sub-modes
are available:
10-1
Note:
Refer to 10.2 Energy-Saving Control for further details.
Safe Mode
In safe mode, the CSU calculates the number (N) of required rectifiers in real time and
performs the N+1 backup. The CSU calculates N by tracking the highest battery charging
current in real time.
When the CSU detects that the number (M) of normally operating rectifiers is less than
N+1, it activates the rectifiers that are currently in sleep mode until M equals N+1. After
that, the CSU does not set excessive rectifiers in sleep mode when N decreases.
Free Mode
In free mode, the CSU does not calculate the number (N) of required rectifiers or
automatically control operational status of rectifiers. In this mode, maintenance personnel
can activate rectifiers or set them in sleep mode with no restrictions from the CSU.
Caution!
Free mode is for system debugging. Only professional maintenance personnel can use
this mode.
10-2
at their peak efficiency. The CSU calculates N by tracking the total load current
and battery charging current in real time.
à In Auto Save Mode, the CSU arranges the rectifiers work in shifts in accordance
with a period parameter. The process is as follows: The CSU activates the
rectifier that has been in sleep mode for the longest period of time, and then
sets the one that has operated for the longest period of time into sleep mode. In
this process, the CSU ensures three-phase balance as its priority and that M is
equal to N.
The rectifier shift period can be set and related parameter is SMR Rotated Period
(7 days, by default). When this parameter is set to 0, the shifts are disabled.
l Auto NonSave Mode
If Auto Save Mode fails, the system automatically switches to Auto NonSave Mode
and activates all the rectifiers. When the saving conditions are satisfied again, it
automatically switches back to Auto Save Mode.
Temp.NonSave Ctrl.
In Temp.NonSave Ctrl. sub-mode, the system performs the following operations:
1. The system activates all the rectifiers first.
2. When the operational situation of the DC power system meets the conditions of
Auto Save Mode, the system switches to Auto Save Mode after the period of the
Temp.NonSave Delay (24 hours by default).
Perm.NonSave Ctrl.
In Perm.NonSave Ctrl. sub-mode, the system activates all the rectifiers and stays in this
sub-mode unless it is manually set to another operational mode.
10-3
10-4
Note:
You can know the manual maintenance result by querying the maintenance records
through the menu path > Maintain.
10-5
10-6
Caution!
During the rectifier upgrade, the CAN device statistics operation cannot be used.
11-1
Caution!
The CSU can only recognize a USB flash drive but not other storage devices including SD
cards, mobile hard disks, MP3 or MP4. The system format of the USB files is FAT.
Menu Description
Menu path: > Export His. Rec. > Exp. His. Alm./Exp. His. Data/....
Functions of the related submenus are as follows:
11-2
l Exp. His. Alm.: Used to export all the history alarm records.
l Exp. His. Data: Used to export all the history data.
l Exp. Test Rec.: Used to export all the battery test records.
l Exp. Event Rec.: Used to export all the event records.
l Exp. Equ. Rec.: Used to export all the battery equalization charging records.
l Exp. Disc. Rec.: Used to export all the battery discharging records.
l Exp.Maint.Rec.: Used to export all the battery maintenance records.
l Exp. Hr. Ten. P. Rec.: Used to export all the hourly battery records of tenants.
l Exp. Day. Ten. P. Rec.: Used to export all the daily battery records of tenants.
l Exp. Mon. Ten. P. Rec.: Used to export all the monthly battery records of tenants.
l Exp. Ann. Ten. P. Rec.: Used to export all the annual battery records of tenants.
l Exp. Total. Ten. P. Rec.: Used to export all the battery records of tenants since the
system is commissioned.
l Exp.All Rec.: Used to export all the battery records.
Operation Guide
The operation guide for exporting the history records is as follows:
1. Insert the USB flash drive into the USB interface of the CSU. The icon is displayed
on the lower right corner of the page.
2. Export the history data. The operation process is shown in Figure 11-3.
3. When "Succeed!" is displayed on the CSU page, the data transmission is completed.
Remove the USB flash drive.
Caution!
l To avoid damage to the USB flash drive, do not remove the USB device during the
export.
l During exporting the data, press Ent to end the operation.
11-3
11-4
Operation Guide
The operation guide for visiting the CSU web page is as follows:
1. Open the IE browser, enter the IP address (for example, 10.9.82.16) of the CUS into
the address bar, and then press the Enter button. The login page is displayed, see
Figure 12-1.
12-1
Operation guide:
12-2
l Click the Refresh button to update the current information of the page.
l If the Web page is abnormal during the operations, click Refresh button after five
seconds to restore the page.
l If "Database is busy, please try again 5 minutes later!" is displayed during the data
export, try later.
l Click the Logout button to quit the web page.
12-3
12-4
A-1
Note:
You can modify the system parameters through the menu path > System Para..
A-2
8 Pre.Equ.Chg.Du- 0 0-48
ra. (hour) Duration for the system to carry out the appointed
equalization charging. When it is set to 0, it
means that the appointed equalization charging
will be managed in accordance with the ordinary
equalization charging.
A-3
16 Batt.Det.Period 30 0-90
(day) Interval for the system to carry out periodical battery
detection. When it is set to 0, it means that the
periodical battery detection is disabled.
A-4
A-5
A-6
A-7
Note:
You can modify the battery parameters through the menu path > Batt. Para..
A-8
2 SNMP Read public The Max. length of the name is 12 characters. You
Comm. can use numbers, upper case, lower case or space
in the name.
Defines a string password to permit data reading if a
reading community is provided in a request.
3 SNMP Set Comm. private The Max. length of the name is 12 characters. You
can use numbers, upper case, lower case or space
in the name.
Defines a string password to permit data setting if a
setting community is provided in a request.
5 SNMPV3 User zteuser The Max. length of the name is 12 characters. You
Name can use numbers, upper case, lower case or space
in the name.
Defines the user name that is agreed upon in
advance by both of the communication parties and
is not to be sent on the network.
6 SNMPV3 12345678 Defines the password that the sending party uses to
Auth.Pass make an abstract of the data to be sent, and sends
the abstract and the data to the receiving party.
The receiving party re-calculates the abstract in
accordance with the data. If the data is tampered
during transfer, the original and the re-calculated
abstracts do not match. This password is agreed
upon in advance by both of the communication
parties and is not to be sent on the network.
7 SNMPV3 Priv.Pass 12345678 Defines the password that the sending party uses
to encrypt the data to ensure that it cannot be
deciphered during transfer. This password is agreed
upon in advance by both of the communication
parties and is not to be sent on the network.
A-9
Note:
You can modify the SNMP parameters through the menu path > SNMP Para..
A-10
B-1
B-2
DC
- Direct Current
EEPROM
- Electrically Erasable Programmable Read-Only Memory
FTP
- File Transfer Protocol
GPRS
- General Packet Radio Service
HTTP
- Hypertext Transfer Protocol
IE
- Internet Explorer
IP
- Internet Protocol
LCD
- Liquid Crystal Display
LLTD
- Load Low Temperature Disconnect
LLVD
- Load Low Voltage Disconnect
MAC
- Media Access Control
MODEM
- Modulator-Demodulator
NC
- Normally Closed
NMS
- Network Management System
NO
- Normally Open
OS
- Operating System
PFC
- Power Factor Correction
SC
- Supervision Center
SIM
- Subscriber Identity Module
SMR
- Switching Mode Rectifier
SMS
- Short Message Service
SNMP
- Simple Network Management Protocol
SPD
- Surge Protection Device
TCP
- Transmission Control Protocol
USB
- Universal Serial Bus
II