Académique Documents
Professionnel Documents
Culture Documents
10
MATRIX BUSINESS SCHOOL,
PUNE.
INVENTORY MANAGEMENT 1
Project
Report
BY
RAVI BHUSAN
Roll no – 10
PGDM(FINANCE)
2009-11
DECLARATION
Date : - ROLL NO : - 10
PGDM(FINANCE)
ACKNOWLEDGEMENT
RAVI BHUSAN
ROLL NO :- 10
PGDM (FINANCE)
Certificate
CONTENTS
1. EXECUTIVE SUMMARY……………………………………………Page 7
3. INTRODUCTION………………………………………………………Page 10- 48
A. Organizational Setup
B. Principles of Store Keeping, Storage, Care & Preservation of Stores.
C. Receipt Procedures & Inspection
D. Manual Store Accounting
E. Stock Verification
F. Issue of Stores
G. Local Purchase
H. Disposal Procedure
I. Loss of Stores
J. Return of Stores
K. Inventory Control
L. Financial
5. FUTURE PLAN………………………………………………………..Page 51
7. BIBLOGRAPHY ………………………………………………………Page 53
1. EXECUTIVE SUMMARY
Inventory is the most excessive assets of a Coal Producing company like Coal
India Limited and also the idle resource. There are various inventory control
techniques such as Economic Order Quantity, Reorder Point, Safety Stock,
ABC analysis, XYZ analysis, FSN analysis, HML analysis, VED analysis, Just
In Time inventory control and many more. Out of all these are some techniques
which are applied for inventory control at Coal India Limited, India.
Coal India Limited, a Nav Ratna Company is the second largest corporate body,
Having about 4.60 lakh employees with headquarter at Kolkata, is a Holding
Company under ministry of Coal, Government of India. It was formed as a
public Sector undertaking in November 1975.
Coal India presently contributes 85% of the total coal production in India. It
operates through eight subsidiaries: seven producing companies and one
planning & design institute.
3. INTRODUCTION
A. ORGANISATIONAL SET UP
I) Regional Stores
To cater to the material requirement of various Collieries, Regional Stores will be created in
each Area. Each Regional Stores will be under the charge of Depot Officer, who will be
assisted by a Store Officer. While he will be functionally responsible to the Area Material
Manager, he will be administratively under the General Manger of the Area. The broad
functions of Regional Stores/Area Stores will be:
• Indenting;
• Receipts;
• Custody & store keeping;
• Issues to collieries;
• Kardex posting & record keeping;
• Claims, insurance & other miscellaneous work;
• Functional analysis;
• Inventory control;
• Stock verification.
(a) Deport Officer: Every Store Depot in the subsidiaries of Coal India Ltd., will be
under the supervision of an officer nominated by the management who will be termed
as a Depot Officer. The Depot Officer of the Regional/Area and Central Stores will be
a Dy. Material Manager or Assitant Material Manager as the case may be. He will be
directly responsible to the General Manager for the stores under his custody. He may,
however, obtain advice on the technical aspects of Stores Department like inventory
control, replenishment system, procurement, store procedure, etc. from the Area
Material Manager (Stores) directly or through the General Manager.
(b) Dy. Material Manager: The Dy. Material Manager will head the Regional/Area
Stores of the Area in which he is posted. He will also assist the General Manager in
matters pertaining to stores.
Overall Responsibility
He will have overall responsibility for the efficient functioning of Regional/Area Stores and
will be responsible for all material management functions pertaining to the Area.
Detailed Responsibility
(i) Maintain direct personal contacts will all levels of production, especially with GMs in
order to solve/reduce material problems.
(ii) Maintain direct personal contact with Purchase Officer to ensure/speed up delivery,
particularly in respect of items in critical short supply.
(iii) Supervise arrangement in his zone for safety and security of the stores under him.
(iv) Organize division of labour for the staff under him.
(v) Plan material storage, movement and handling in a way as to achieve maximum
utilization of space and energy.
Inspection Duties
(i) Carry out periodical inspection of the colliery stores to ensure the inventory build up
does not take place.
(ii) Test check all registers e.g. RR Register, Day Book of Receipt, Issue Register etc.
(iii) Check that preparation of Receipt Vouchers and clearance of documents is not
delayed.
(iv) Check the general condition of the stores so that stores are preserved from
deterioration and the store area is kept neat and clean.
(v) Make visits to the railway station periodically to see that there is no undue
delay in clearance of consignments by the Store Depots.
(c) AMM Store Officer : He will be responsible for custody, care, maintenance and
handling of materials in his store.
Responsibility
(i)He will report to the Material Manager/Dy. Material Manager of the Stores Depot and
will directly supervise the staff under him.
(ii)He will responsible for correct receipt, issue, safe custody, preparation and posting of store
documents in Kardex/bin cards.
(iii)Arrange collection of consignment from railway station and ensure timely unloading of
wagons and collection of consignments to avoid incidence of wharfage/demurrage.
(iv)Arrange inspection of the material received and preparation of receipt, vouchers.
(v) Correspond with suppliers regarding receipt of materials, damage, rejection, claims, etc.
(vi)Inspect every week the Day Book of Receipt, Depot Transfer Register, R.R.Register,
Issue Register and accountings records of “SELF” consignment.
(vii)He will be responsible for opening and closing of the store depot.
(viii)To retire documents from the banks and submit monthly statements to Accounts branch
giving accountal of the advance drawn.
(ix)To arrange for departmental stock verification.
(x) Watch stock position and raise indents when they drop to the recorder level and early
out the periodic review.
(xi) Distribute the work to his subordinates.
Store Officers: When a Depot Officer is transferred and new officer takes over as Depot Officer
of a Store Depot, the handing over/taking over of the Store Depot should be attended to as an
important independent function, in addition to the handing over/taking of other functions.
(i) That all receipt, issue and adjustment vouchers have been prepared and posted in the
Bin and Kardex Cards and disposed of as per the procedure.
(ii) Details of plant & equipment/Stores held surplus on which action is pending.
(iii) Disposal of Scrap materials.
(iv) Provision reviews for recoupment of stock.
(v) Handing taking over charge certificates will be submitted in triplicate.
The following principles of store keeping will be observed by all personnel employed on
store keeping functions :
(a) Separate areas for different functions (Receipt, storage and issue).
(b) Unidirectional flow of stores.
(c) Optimum utilization of space- floor area and vertical space, minimum space for office
accommodation in store houses.
(d) Proper lay-out, providing gangways for working space, fire lane and use of
mechanical handling devices and ventilation.
II Storage
Every Store Depot will be laid out and organized to allow smooth flow of receipts and issues,
to ensure that no hidden stocks exist or stocks accumulate, to obviate stock verification
discrepancies and above all to reduce the cost of inventory by better stores management. The
principles of store keeping should be observed while organizing a store house.
The following methods may be adopted for the storage of different classes and categories of
stores :
(a) All small items of stores and spare parts will normally be kept in bins. An
identification label showing part number/code number and description of the items will be
affixed to one or more pieces of the item in a bin. A bin front label showing the part
number/code number and description of the item will also be affixed to the front side of the
bin. Where more than one item is kept in a bin, the bin front label of the different items will
be pasted in front of the bin.
(b) Where heavy items are stored on the ground in a shed, identification boards showing
the class/code number and description of the stores will be kept in the vicinity of the items.
The stores will be arranged and stacked in such a way that the oldest materials can be selected
first for issue.
(c) Timber stacks will have identification boards attached to the stacks, indicating the
class, code number and the full description of the items.
(d) Similarly boards indicating the class, code number and description of the items will be
kept near POL drums stacked in the POL area.
(e) Identification boards showing the class, code number and the description of the
materials will also be affixed to the different classes of the iron and steel materials in
the steel yard. The stacks of materials will be arranged in such a way so as to facilitate
the counting and issue of the older materials.
(f) Items of special steel like tool steel, carbon steel etc. will be marked by a colour code.
Both the ends of the items will be colour painted so that even if an item is issued from one
end, it will still be possible to identify the cut piece from the colour code at the other end. It
will be preferable to mark the specification of the special steel throughout the lengths of rods,
bars etc. with paint and stencil at regular close intervals for easy identification at the
workshops also.
(g) Cement & lime will preferably be stocked in a separate godown to obviate the fine
dust from setting on the stores. cement bags will be stacked not more than 10 feet high to
prevent the bottom layer bags turning into stone.
IV Handling of Stores
Preservation of Stores
General
(a) Preservation of stores is the process of preventing deterioration of stores
held in storage in store depots. Under the normal conditions obtainingn in
stores depots, stores are liable to deterioration and spoilage due to
inadequacy of covered storage accommodation, insufficiency of proper
storage conditions and also as a result of chemical and other reactions
brought about by the environment in which the stores are kept.
(b) The cost of preventing deterioration along-with spoilage cost is one of the
element constituting the inventory carrying charges and it it necessary that
the out of pocket expenses incurred in this regard are kept to the absolute
minimum with a view to reducing the total inventory cost. The extent to
which preservatives will be applied and the degree of protection to be
accorded will depend upon the value of the stores, and also subject to the
condition that the total production cost is not thereby enhanced
considerably.
• . Method of Preservation
The methods of maintenance and preservation applicable to some of the important types of
stores used in the coal India Limited are described below :
(a) Iron & Steel : All metals are more or less liable to corrosion, particularly iron and
steel. If the materials are to be stored for long periods, it is necessary to protect them with a
coat of oil, grease or some slushing compound. This particularly applied to bright finished
steel bars and iron and steel materials stored in the open area. A red oxide paint is good
primer to prevent corrosion of structural steel, and is generally used immediately after
installation as long term preservatives.
(b) Metal surfaces : For metallic items of stores in warehouse, the use of temporary
coating on metal surfaces will provide adequate cover during their period of storage. The
simplest of these solutions is varnish containing resin, bitumen, mineral oil as plasticizer and
white spirit. Servo/R P 102 of I.O.C. and equivalent fluids of other oil companies will serve
the purpose.
(c) Timber : Timber normally used in collieries are props and rollas, sleepers, sprags,
bamboos and sawn planks. As these items are susceptible to damage by bacteria and fungi.
Toxic reagents are needed to destroy them. Coal tar/creosole is highly toxic to fungi and
bores and as it is insoluble in water, it provides lastings effect. Note: Timber treatment under
pressure is a specilized technique and falls outside the scope of Stores Depots.
(d) Rubber hoses : Rubber hoses will be stored in a cool dry place and kept away from
direct sun-light and high temperature. Rubber hoses will never be hung on nails, hooks or
across boards, as such methods are likely to cause sharp bending, strain and eventual
deformation, cracking and bursting of the hoses. Hoses will be kept coiled on floors and
shelves.
(e) Conveyor belting : New conveyor belting will always be stored upright in factory
crates, and never on their sides, as they are liable to telescope and become distorted. Reels of
belting will be kept under covered accommodation on tripod stands, and the reels rotated
once a week. Where short lengths are cut from reels, the exposed ends will be brushed with a
vulcanizing solution to prevent absorption of moisture.
(f) V belts : V belts will be stored in a cool dry room and should be stored in coils. They
should never be hung up on nails to obviate strain and cracking.
(g) Wire ropes : As ropes have to be stored for long perods, it is necessary to ensure that
there is no external or internal corrosion. If stored in the opem, the reels should be raised
from the ground. External surface should be greased to prevent ingress of moisture.
(h) Bearings : Bearings are received from suppliers well greased, wrapped in
impregnated paper and packed in separate sealed card-board boxes. Packages of this kind are
often broken in the store house to check the goods in detail.
(i) Wires & cables : Wires and cables will be protected from corrosion and deterioration
by moisture chemicals, high termperature and severe exposure etc. They will be stored in a
clean and dry place.New cable wound on solid wooden drums will be retained as received
from the firm. Such drums will be stored in a vertical position. Also good air circulation will
be provided to prevent dry-rot in the wood.
(c) Batteries :
(i) New batteries will be stocked in their cartoons and will be so located that the oldest
batteries are issued first.
(m) Plant & machinery spare parts : Plant and machinery and pare parts will be
protected against deterioration due to rusting, scaling, atmospheric corrosion etc. while in
storage.Servo grades of temporary protective such as Servo RO 102 based on mineral oils
provide adequate protection to plant and machinery for short period of storage. These fluids
can be easily applied or removed. They provide a continuous protective coating inside and
outside storage irrespective of the fact whether the parts are dried or not. They have
dewatering and rust preventive properties and finger-print neutralizing effect.
Some of the general preservatives and the stores on which they are used are indicated below:
(a) Composition rust preservative, Chain, milling cutters, tools, gear etc.
Mineral Jelly
(b) Grease G.S On exposed & working parts of machines.
(c) Solution rust preventive Interior surfaces,engine cylinders,gauges etc
(d) Oil M-80 General purpose, lubrication on spare parts
(e) Vapour phase inhibitors For costly small articles, graduations etc.
(f) Silica Gel To Keep in cupboards containing small tools
as moisture absorbent.
(g) Soap yellow For leather goods of definite shape
(h) Dubbin For leather goods of indefinite shape
(i) Plastic packing Drills, cutter, costly article
(j) Copper Naphtha ate & Creosol On bamboo poles.
(k) French chalk For rubber goods.
(j) Coal tar/Creosol oil For timber
Mode of Delivery
(a) Rail
(b) Road
(c) Air
(d) Post
(e) Sea
(a) When dispatch documents i.e. challans, invoices, railway receipts/Parcel way
bills/consignment notes/bills of lading are received at the stores, they will be scrutinized
against the relevant purchase orders. RRs and consignment notes will be recorded in the
following as applicable :
(a) A Store Keeper from the stores will be detailed daily to the railway station to verify
the arrival of the consignments whether dispatched as piece consignment or full wagon. In
case of non arrival he shall have this recorded on the RR by the Railway staff with date and
initials. When stores are received, delivery will be taken by surrendering RR to the Railways
after making necessary entries in the delivery book. If the consignments are not received
within one or two months (depending upon the despatching station) from the date of dispatch
of consignment, the matter will be taken up with the Railway authorities.
(b) Piece Consignments : These will be checked carefully. If any package is found
broken or in a tampered condition, “open delivery” will be demanded. Entry regarding
condition of the package will be made in the delivery book while surrendering the RR. An
application will be made to the Station Master for giving open delivery of the consignment. A
short certificate will be obtained from the Railways clearly indicating the
shortages/losses/damages involved for lodging claims on the Railways/Insurance
Company/suppliers.
(j) Wagons booked to the depot/colliery sidings or at the nearest Railway Station, will be
unloaded within the free time (5 day light hours) allowed by the railways, without
incurring any demurrage.
(ii) In the event of loss/non receipt of the RR, the delivery will be taken after executing an
Indemnity Bond as prescribed by Railways. If the RR relating to a consignment booked to
‘SELF’ is lost, mere execution of an Indemnity Bond at the receiving station will not be
enough. The relevant rule regarding Railway goods tarrif requires the production of a
stamped Indemnity Bond signed by the sender and countersigned by the Station Master of the
forwarding station.
Road Carriers
(a) The store Keeper shall take delivery of material transported by road. He will sign a
copy of the challan/invoice and return it to the driver.
(b) In case of suspicion regarding loss/damage in transit, the packages will be opened in
the presence of the driver. Damage/loss statement will be prepared, minutes drawn up and
signed by the Depot Officer, the carriers’ representative if accompanying the truck and also
truck driver.
When stores are received in depot by depot transfer from anther stores depot, Store Keeper,
In-charge of the Stores Depot will verify the actual receipt of the material with reference to
the Depot Transfer Issue Voucher received from the issuing store depot.
Consignment Register
The store staff detailed on station duty for collection of consignments despatched by rail will
maintain Consignment Register as per specimen given at Annexure 5. After taking delivery,
he will put his initial in the appropriate column and handover the consignments to the In-
charge of the Receipt Section who will also put his initials as token of receipt and enter in the
goods inward register along with details of discrepancies if any. This register will be
inspected by the Officer-in-charge of the stores depot weekly to ensure that the consignments
transported from the Railway station have actually brought in the depot and accounted for.
All stores received in the store depot whether by road, rail, air or post will be recorded in this
register .
All plant, equipment, stores, spare parts and materials received in a store depot will be
subjected to inspection by the Inspection Department according to the procedure given
separately on the subject. In the case of timber delivered directly to the collieries, the
inspection will be carried out by the Colliery Manager nominated by the Project
Officer/Agent for the purpose.
Documentation of Receipts
(a) After inspection is over, the receipt voucher will be prepared in quadruplicate, by
receipt section in respect of the stores found acceptable by the inspecting wing. The result of
inspection will be recorded by the Inspector under his signature duly dated on the receipt
voucher itself in the column provided.
(b) Separate receipt voucher will be prepared for each challan. Each receipt voucher will
be allotted a control number from the receipt control register maintained by receipt section.
The control numbers will remain in serial order for each block year commencing from 1st
April. All copies of receipt vouchers will be signed by In-charge of Receipt Section,
CSK/Sr.S.K. and the officer stores.
(c) Receipt voucher number will be endorsed on the relevant challan which will be
retained in the Receipt Section.
(d) The stress along with all the copies of receipt voucher will be forwarded to the
concerned shed/area on a peon book. In-charge of shed/area will sign in the peon book in
token of having received the materials and receipt documents.
(e) Kardex poster will post the receipts in kardex cards and put his signature with date in
the receipt voucher. He will then forward all the copies of receipt voucher to Receipt Section.
The columns in receipt control register showing the ‘date stores binned/stacked’ and ‘date
posted in kardex cards’ will be completed and the receipt voucher will be put up for the
signature of Depot Officer along with the receipt control register. The Depot Officer will
check if any abnormal delay has taken place in binning or kardex posting and after signing
the receipt vouchers return the same to receipt section with his remarks, if any, in the receipt
control register. In case of full/part rejections the instruction as laid down in Annexure 9 will
be followed. Rejection note will be prepared in quadruplicate within maximum 15 days of
receipt and distributed as follows :
(f) Receipt section will retain the book copy (yellow copy) of receipt voucher and
distribute the other copies as follows :
(g) Accounts Department will carry out valuation of the receipt voucher by adding sales
tax, excise duty, freight charges, wharfage/demurrage, packing/handling charges etc. to the
basic price and pass the supplier’s bill. Total value will be shown in both the copies of receipt
vouchers. White copy will be retained by the Accounts and green copy sent to data processing
section for carrying out adjustments in the value of stores received. The green copy will be
sent to Kardex Section for filling.
(h) Rejected goods will be kept aside and not mixed (other acknowledgement due) with
the other consignments. The supplier will be asked by a registered post letter to remove the
rejected material within 15 days from the receipt of the letter. If the supplier does not remove
the material within the specified time limit or if he desires that the goods be sent to him, then
arrangements will be made to send back the goods on freight ‘to pay’, under advice to the
suppliers. Packing and handling charges will be recovered from the supplier. When there are
no pending bills, Depot Officer will approach purchase wing to arrange recovery of the
amount for the rejected materials prior to handling over to the supplier.
(a) The Depot Officer will accept the stores delivered upto a period of 21 days after the
expiry of the delivery date as stipulated in the supply order provided he is satisfied that the
material is still required. This, however, is not applicable to local purchase.
(b) Where the delay in supply is more than 21 days but less than 90 days from the date of
delivery stipulated in the supply order, the Depot Officer will, in the first instance, accept the
material but forward the bills relating to that supply under objection to the Purchase Office
concerned for consideration of acceptance of the bill with or without penalty for late delivery.
Where the delay in supply is more than 90 days, the consignment will be accepted only with
the prior approval of Material Manager (Purchase).
(c) The date of despatch of consignment i.e. date of railway receipt will be taken as the
date of delivery of material for the above purpose.
Introduction
In all the stores depots manual stores accounts will be maintained in kardex cards by Central
Regional Stores. They will be kept in cabinets in the order of material code number, arranged
category wise. Specimen forms of the kardex cards comprising numerical ledger card and
history card are in respectively. The advantage for maintaining the store accounts in the
Kardex cards are as follows :
The kardex/system will contain a set of two cards as follows and a title insert for each item :
(a) Kardex/Numerical Ledger Card : The numerical ledger card will contain the
following information :
(i) Monthly Consumption of stores : This information will be collected by the person
maintaining the same from the column “Issues” of the stock card.
(ii) Material Budget/Indent Reference : This will show either quantity approved against
the material budget or indent issued by the area concerned.
(iii) Once the material budget is approved, the Direct Demanding Officer will place the
supply order against the rate contract as per the min/max limits fixed for each item.
(iv) The store depot will also receive copies of supply orders placed by the purchase
department, against the indents initiated by the areas.
(v) Supply Orders Issued Against Indent/Material Budget : The No. and date of the
supply order, the quantity ordered, name of the supplier, rate and promised date of
delivery will be indicated in the appropriate column of the history card.
(vi) The supply order received will be routed through the ledger poster for making entries
as indicated above.
(vii) Monthly Quota : Depending on the consumption pattern monthly quota will be fixed
for each group/colliery stores/unit to avoid over demanding by indentor. The
quantities so fixed will be recorded in this column.
(viii) Remarks : The stores to be kept reserved for any project/group/colliery/unit will be
recorded in this column giving the name of the unit for which the stores have been
reserved, quantity and the relevant reference under which reservation has been
made.
(ix) Deliveries : All receipt and issue vouchers and cancellations/reductions relating to
indents/material budget and supply orders will be routed through the ledger poster.
(x) When the receipt vouchers are received by the ledger poster, the date of receipt,
quantity received and the balance due will be posted in the relevant column of the
history card corresponding to the indent and supply order in question. In addition to
these entries, the ledger poster will simultaneously post receipt details in the
numerical card.
(xi) Cancellation/reduction of quantities against indents/supply orders will also be posted
under “Delivery Column”.
(c) Title Insert : Title insert will contain the following information :
(a) These cards will be maintained at the respective store depots by store staff who will
be responsible to the Depot Officer for the prompt and correct posting of all the stores
transactions. The ledger clerks will also operate the automatic replenishment system of
procurement under the advice of the Depot Officer.
(b) Kardex will remain under the safe custody of stores staff. Depot Officer will carryout
check periodically.
(e) Posting in the numerical ledger will be done daily.
(g) The obsolete materials and the items having no movement for the last 24 months will
be taken note of for initiating disposal action either by transfer of stock to other sister
group/collieries ot through tender/auction as laid down in disposal procedure.
Numerical Ledger
Loose leaf numerical ledgers as per specimen will be maintained by all colliery/washery coke
plant and workshop stores and revenue items of stores which are treated as “Charged off
stores”. Each page will be signed by the Depot Officer and all entries initialed by the Store
Keeper maintaining the ledger. A certificate duly signed by the Depot Officer on 1st April of
each year giving the total number of the pages contained in the ledger, a record of pages
added and the moved as per the specimen and code numberwise index of items will be filled
on the top of the ledger inside the binder. All the ledger pages should bear the colliery/project
stamp and should be serially numbered from 1 onwards at the commencement of each
financial year. Decimal numbers should be given to the ledger cards inserted during the year.
For example, when card i inserted between cards No. 2 &3 it should be numbered 2.48. The
card inserted between 2 and 2.48 should be numbered 2.24 and so on.
Deferred revenue items (i.e. items having more than one but less than 3 years life) and capital
items (i.e. items having more than 3 years life like plant & machinery) will be accounted for
in the numerical ledger as per Annexure 13. On the reverse of each card, the details of
distribution will be entered in pencil. The total of quantities distributed should always be
equal to the quantity shown as “balance” on the obverse of the card.
E. STOCK VERIFICATION
General
Object
All items of plant & machinery, general and consumable stores, medicines and medical
stores, spare parts for mining and earth moving machinery and drilling equipment and all
charged off stores held in colliery/consumers units.
Responsibility
Accounts Department (Internal Audit) will be responsible for stock verification of stores,
materials, plant and machinery. It will be carried out departmentally under instructions from
the Chief Material Manager by the stores personnel of the stores depots/units independently.
Periodicity
Internal audit will carryout stock verification as per the following periodicity :
(a) Plant and machinery and other capital items in stores depots and all deferred revenue
and revenue stores on charge of stores depots – once a year.
(b) All charged off stores with colliery/project stores which are accounted for on
numerical ledgers – once a year.
(c) Plant & machinery and other capital items deployed – once a year.
All store holders will also carryout departmental stock verification of the stores at least once
in two years. The stock of costly and attractive items like power and training cables, bearings,
non-ferrous metals, instruments, etc. may however, be verified more frequently.
Organization
The internal audit organization for stock verification will comprise the following :
(a) Accounts officer (stock verification) who will be responsible for organizing stock
verification in the entire company as per the periodicity laid down.
(b) Inspector incharge (stock verification) who will supervise the verification work in
various area and other places in the company.
(c) Stock verifiers who will physically carry out the stock verification work allotted to
them.
The departmental stock verification will be carried out by the stores depots under their own
arrangements.
Duties
Inspector (SV)
(i) To maintain the following for the purpose of control :
(a) Verification register;
(b) Field book register;
(c) Stock verification sheet register;
(d) Write off register; and
(e) Register of serious discrepancies i.e. discrepancies involving value of
Rs.1,000/- and above each.
(ii) To watch the progress on stock verification through weekly reports to be submitted by
stock verifiers.
(iii) To receive the stock verification sheets from stock verifiers and Depot Officers and
obtain the orders of Accounts Officers (SV).
(iv) To submit a report once in two months, showing the progress on stock verification
programme to the Accounts Officer (SV) who will keep the Chief Accounts officer (IA)
informed of the same.
(v) To make surprise visits to see that the stock verifiers are actually performing their
duties.
(vi) To carry out test check of the work done by stock verifiers when considered
necessary.
Stock Verifier
(i) To carry out routine verification of stock comprising of any of the following as per
the detailed procedure given in succeeding paragraphs :
(a) Stores in the custody of stores depots/units;
(b) Plant and machinery in stores; and
(c) Plant and machinery deployed in projects.
(ii) To carry out surprise verification of stocks wherever ordered by higher authorities.
(iii) To test check the postings on the receipt and issue side in bin cards for the items
verified by him to ensure that the receipt and issue side postings are genuine.
The following simplified methods may be adopted for determining the physical balances of
certain types of stores as indicated below :
(a) Where the accounting unit is in m/tonne, the actual stock will be indicated in m/tonne
and in decimals indicating kilograms.
(b) Where large quantities of small items are involved, it will be preferable to determine
the test weight of say 100 pieces of the items or of 5% of the total stock and thereafter the
entire stock will be weighed and the total quantity determined on the basis of the test weight
carried out earlier. When the weighment of the entire quantity is made, the maximum quantity
which the scale can weigh will be weighed each time.
(c) In the case of iron and steel materials, like M.S.Rounds, M.S.Squares, M.S.Plates,
R.S.Joist, M.S.Angles, etc, which are accounted for in M/tonne the weight in kgs. per meter
for different categories is indicated in the vocabulary of colliery stores. In such cases,
therefore, the total weight of the entire holdings will be determined on the basis of sectional
weight as prescribed, in the vocabulary.
(d) In the articles like wire-ropes the weight of the total length of wire-rope in a partly
used reel can be determined on the basis of the approximate weight per 100ft or per meter as
indicated in the manufacturer ‘s handbook. The actual weight of the wire rope will be
ascertained by deducting the tare weight of the reel as marked on it from the gross weight of
the reel and thereafter the length will be determined by dividing the net weight by the
sectional weight i.e. weight per meter as indicated in the manufacturer’s handbook. For intact
drums/reels, the length as marked on the reel and manufacturer’s test certificate will normally
be taken as correct.
(e) In the case of valuable articles like non-ferrous metal ingots, the entire stock will
always be weighed regardless of what the stocks may be.
(f) In the case of large stocks of electrical and fragile materials liable to damage in
handling, a certificate will be obtained from the holders of the stock regarding the correct
physical balance.
(g) In respect packed goods like spare parts, the actual weight or numbers as printed on
the packages will be taken as the correct weight/quantity, provided the packages cartons are
intact.
(h) In the case petrol, HSD oil which are distributed through supplier’s pumps, the
quantity held in stock will be determined by use of a properly graduated dipstick.
Clearing Agents
Normally clearing agents are engaged for the discharge of cargo from the ships. BCCL is
working as a clearing agent for all the subsidiary companies of Coal India Limited through
their office at 6, Lyons Range, Kolkata-700001, In performing their duties, the clearing
agents comply with all the rules and regulations laid down by the Commissioners for the port
of discharge, the customs, the steamer agents, the Railways and they will work in such a way
as to get the forwarding note accepted within the free time, as also to ensure that the goods
while I their custody are to be protected from damage or loss and are safely delivered to the
consignee. Besides the responsibility of clearing the consignments from the port and then
dispatching to the consignee, the clearing agents will also get the consignments surveyed in
the following cases for lodging claims for compensation of the loss/damage, if any.
Legal Action
(a) To institute a suit against the Railways, a statutory notice under section 80 of Civil
Procedure Code which is a pre-requisite and condition prior to the filling of a suit shall be
served on the Railway administration within three years from the date of R/R. The object of
giving notice under Section 80, CPC, is to enable the Railway administration to consider the
claim on merits and to settle it without litigation and if they fail to effect settlement within the
prescribed period of 60 days, a suit can be filed.
(b) To institute legal proceedings against port trust, it is necessary to give one month’s
notice, in writing of the indicated suit or other proceedings and the cause thereto. The suit
should be filed within six months from the accrual of the cause of such suit for the
proceedings.
(c) To institute a suit against the steamer’s agent unless suit is brought within one year
after delivery of the goods or the date when the goods should have been delivered the claim
will be time barred.
F. ISSUE OF STORES
Basis of Issue
Issue of plant and machinery, stores and spares parts will be made from the stores depots on
the basis of requisitions submitted by the indentor in the prescribed proforma. Issues will also
be made as per the release orders by the General Manager, Dy.CMM(Stores) or Chief
Engineers.
Types of Issue
(a) Unit Issues : There are issues made by the colliery stores to the consuming unit.
(b) Depot Transfer Issue : There are issues made by one stores depot to another under
the order of competent authority.
(c) Loan Issue : There are issues made by a stores depot to an outside party for a
specified period with the approval of the competent authority. The stores will be returned by
the outside agency before expiry of the period of loan. Where the stores are consumed by the
outside parties, equivalent replacement will be made by them before expiry of the period of
loan. The return of stores before expiry of loan period will be carefully progressed by the
depot officer of the issuing stores depot.
(d) Sale Issue : There are issues made by the stores depots to contractors as per the terms
of the contract, at the predetermined issue rates. Issue of surplus/unserviceable stores and
plant and equipment to other Government Organisations and private companies are also
treated as sale issues. This will be mostly in the case of sale of such items by public auction
or tender.
Unit Issues
Requisitions : Requisitions for stores will be made on issue voucher (unit issue). This
requisition-cum-issue document will be prepared by the officers authorised by Colliery
Manager/Project Managers/Workshop In-charge to demand stores for their respective
colliery/project/workshop. Three specimen signatures of the officers authorized to demand
stores duly attested by the authorising authorities should be maintained in the unit stores for
record and verification at the time of issue of stores. Officers authorized to demand stores
should obtain the signature/thumb impression of the person detailed to collect stores on the
issue voucher in the column “Person authorized to collect” before sending the same to unit
stores. Requisitions for stores will normally be prepared by Unit Engineer in case of spare
parts and general consumable stores and by the Under Manager/asst. Manager in the case of
mining equipment and supplies. Requirements of stores should be properly worked out in
advance and consolidated requisitions prepared to avoid demanding the same item several
times during the day.
The issue voucher will be prepared by indentor in quadruplicate, the second, third and fourth
copies being carbon copies of the original. The following details will be entered in the
voucher, all copies of which should be signed and dated by the indenting officer :
The serial number and type of machine for which the spares are demanded are required to be
furnished on the issue voucher to ensure that the spares and accessories drawn for a particular
machine are used for the same machine. For this purpose, al the machine deployed in the unit
should be given a serial number. A machinery card should also be maintained for each
machine showing date of spares and accessories replaced with dated, signature of the machine
incharge.
The indentor will retain the fourth copy of the issue voucher as book copy and send copies
No.1 to 3 to unit stores.
The three copies of the issue voucher will be distributed by the unit stores as under :
(a) Copy No. 1 – Retained by unit stores.
(b) Copy No.2 - To accounts section/
(c) Copy No.3 - To indenter, indicating quantity issued for retention.
The stores staff issuing the stores will prepares three copies of gate pass in the printed from
from the issue voucher, for the stores issued. The number of packages or cases or bundles will
be indicated on the gate pass to facilitate check by the security staff at the gate of the stores
depot. The gate pass No. and date will be entered in all the copies of issue voucher. Gate pass
will be signed by the Stores Keeper In-charge authorised by the Manager/Officer In-charge of
unit. The specimen signatures of the persons authorised to sign the gate passes will be
maintained by the security staff for record and verification at the stores. The remaining two
copies along with the stores will be delivered to the indentor’s representative who will
surrender one copy at the gate to the security staff. The stores will be allowed to pass out of
the gate after checking by the security staff. The copy of the gate pass deposited at the gate
will be compared with the book copy by security staff for any breaches in security.
Documentation Procedure
On completion of the issue, copies no.1&2 of the issue voucher, will be forwarded by the
concerned Store Keeper to the Store Keeper/asst. Store Keeper maintaining the numerical
ledger for entering the issue in consolidated issue statement in duplicate. He will write the
Material Code No. wherever not done in the issue voucher and enter all the details (including
rate) in the consolidated issue statement which will be serially numbered and dated. After
entering the details of all the issues made during the day in the consolidated issue statement
he will post the total quantity of each item issued during the day in the respective cards of the
numerical ledger giving the Reference Serial No. and number and date of the consolidated
issue statement. He will write page number of the ledger card in which the issue is posted and
initial against each item in the consolidated issue statement. One copy of the statement will be
filed by him and the other copy along with connected issue voucher (Copy No.2 ) will be sent
to colliery/project Accountant for entering the value of issues made and for working out the
stores cost. Copy No.1 of the issue voucher will be kept as office copy by the ledger keeper.
Store Keeper Incharge of unit stores will carry out necessary checks to ensure that all the
entries in the issue vouchers, consolidated issue statement and the numerical ledger are
correctly made.
Where stores are transferred from one unit stores to the other, issue voucher (inter unit
transfer) will be used. It will be prepared in quadruplicate and distributed as under :
(a) Copy No. 1 : To be retained by issuing unit stores duly receipted by receiving unit
stores.
(b) Copy no.2 : To receiving unit stores for retention.
(c) Copy No.3 : To area/regional of issuing unit for taking on charge in computerized
ledger and to debit to the receiving unit.
(d) Copy No.4 : Book copy.
Transfer of stores from one depot to the other is termed as “Depot Transfer”. It may be from
central stores to regional/area stores depot, between the colliery stores and regional/area
stores, between one colliery stores and another colliery stores within an area or outside an
area. Although the stores thus issued from the regional stores/area stores to the colliery stores
are charged to consumption, the stores will not be directly issued to the consuming units.
They are drawn from the regional stores/area stores at fixed intervals and issued from the
colliery stores to the consuming units only as and when required. Depot transfer will be done
by issue voucher (Depot transfer). This form is prepared in quintuplicate, 2nd, 3rd, 4th and
5th copies being carbon copies of the original. The indenter will enter the following details in
the voucher (Depot transfer).
The Indenting Officer will sign the issue voucher (Depot transfer) in the space provided along
with designation and date. He will retain Copy No.5 marked as “Book Copy” (Blue colour)
and forward the remaining four copies to the central stores/area stores/regional stores from
where the stores are to be drawn, through the stores staff authorized to draw the stores. Here
also as in the case of unit issue, 3 sets of specimen signatures of the officers authorized to
draw the stores duly attested by concerned officers and the specimen signatures of the
authorized stores staff deputed for collection of stores by the above officers will be
maintained at the issuing stores depots for verification and record.
The authorised stores staff of the receiving stores depot will take the stores along with Copies
No.1 and 3 (white & yellow) and return Copy No.1 (white) to the issuing stores depot duly
signed by the Depot Officer of the receiving stores depot as token of receipt within 72 hours
of receipt of stores. Copy No.3 (yellow) will be retained by the receiving stores depot along
with the book copy (No.5) for record. The issuing stores depot will send Copy No.2 (pink) to
the Data Processing Section/Accounts Department and will retain Copy No.4 (green) along
with Copy No.1 (white) duly receipted by receiving stores depot for record.
(a) Copy No.1 (White copy) : To be retained by issuing stores depot duly receipt by
receiving stores depot.
(b) Copy No.2 (Pink copy) : To be retained section/accounts department after issue of
stores.
(c) Copy No.3 (Yellow copy) : To be retained by receiving stores depot.
(d) Copy No.4 (Green copy) : To be retained by issuing stores depot.
(e) Copy No.5 (Blue copy) : Book copy of receiving stores depot.
G. LOCAL PURCHASE
General
Local purchase is a method of providing items of inventory required in an emergency or for a
breakdown, which cannot await purchase in the normal course. It involves the purchase of
stores or spare parts from the nearest market, trade center or metropolitan city by payment of
cash. Local purchase also includes local manufacture or local repair, where it is authorized.
Local purchase will be authorized and should be effected in really emergent cases only. Local
purchases could be effected under the following circumstances viz, :
(a) When a machinery or equipment has suffered breakdown and certain items of spares
are required for replacement, which are not available in stock in the stores depot concerned or
in the regional/central stores. To restore production without delay it would be justifiable to
arrange local purchase of such items.
(b) An emergent situation may sometimes arise which may necessitate the immediate
provision of certain items not available in stock. This includes situations where medical
attention is immediately required which call for the purchase of certain medical supplies not
available in stock.
(c) Where a requirement arises for an isolated item costing less than Rs.200/-, the same
may be locally purchased provided no other item of the same class is required at the same
time which can be combined in the same indent to make the total value of the indent more
than Rs.200/-, in which case the procurement should be arranged by normal purchase action.
(d) In any other exceptional situations where receipt of stores through normal purchase
methods cannot be awaited.
(a) General and consumable stores required for production and in exceptional cases office
requisites.
(b) Spare parts applicable to mining, drilling and excavation machinery, which are of
indigenous manufacture or of imported origin available ex-stock.
(d) In extreme cases, it may become necessary to procure items of capital equipment by
local purchase, with prior approval of General Manager/Chairman-cum-Managing Director.
(b) Local Purchase Ex-Kolkata Market : Project/unit representatives may effect local
purchase of stores through Kolkata market by payment of cash obtained through project
imprests.
(c) Local Purchase Ex-Kolkata Through Kolkata Purchase Officer : Local purchases
may be effected by the purchase executives of the Kolkata purchase office of the subsidiary
company at the request of the projects/units and assisted by the representatives of the
projects/units. In such cases the local purchase will be paid for by cash secured from the
imprest maintained in Kolkata purchase office. No local purchases will be effected of any
items on forward delivery basis.
Where the local purchase of stores involves deputing a representative to nearby trade centers
of the Kolkata market, the Officer authorizing the local purchase will ensure that the total
value of stores to be purchased at any one time is commensurate with the cost of local
purchase; that is the TA/DA and other incidental expenditure to be incurred by the person
deputed to effect the local purchase is not unduly large in relation to the value of stores to be
purchased.
(b) Record of stores Purchased Locally : This register will be maintained to provide a
record of all local purchases effected by the project/unit concerned indicating the rats at
which stores are purchased. The form of this record is shown below :
Receip
Date of Descri
Code Sancti t
Local ption Quantity Name of
Sl.No. No./ Part Rate on No. Vouch Remarks
Purcha of Purchased Supplier
No. & Date er No.
se stores
& Date
1 2 3 4 5 6 7 8 9 10
(c) Indent for Local Purchase : Where local purchases are effected in the Kolkata
market, in consultation with the Kolkata Purchase Office, an emergent indent will be
prepared and handed over to the Controller of Purchase/Purchase Officer, Kolkata as
authority of purchase. The form for indent for local purchase is shown in Annexure33..
The project/unit representative deputed for local purchase will hand over to the concerned
officer the documents as indicated below :
H. DISPOSAL PROCEDURE
General
Unwanted Holdings
Surplus Equipment
Items which have outlined their utility due to fair wear and tear or accident and
equipment declared beyond economical repair by a competent technical authority
(Executive Engineer-Excavation/Dy.Drilling Superintendent as the case may be) are
termed as unserviceable stores.
The reject of a material used in the manufacturing process like turning, borings and
waste materials which are not reusable are termed as scrap.
Survey Committee
Where the anticipated sale value exceeds Rs.1 lakh the CMM or Dy.CMM(Stores)
will be associated as a member of the Survey Committee.
In the case of important and costly items of plant and machinery, CE(E&M) his
representative will also be associated in the survey.
When equipment/vehicle of the headquarters are considered for disposal, the Survey
Committee will be constituted under the orders of CMM. In such Survey Committee,
the representative of the Controller of Accounts, CE concerned and the CMM should
also be associated, in addition to the representative of the holding department.
Fixation of Reserve Value : The Survey Committee will carry out physical survey of
all the equipment, stores and scrap materials put up for disposal and fix the reserve
value in respect of individual lots. At the time of carrying out survey the committee
should determine the utility of the items to perform the original function or whether it
could be rehabilitated for similar or alternative purpose. The long term usage of the
equipment should be kept in view by the survey committee before accepting to
condemn the plant and equipment. The reserve value or sale value should be carefully
fixed taking into consideration all facts like the original purchase price, the last sale
value or depreciated value, the present condition of the equipment, the last sale value
realized in the sale similar plant equipment and the replacement value or the current
market value. The particulars of the equipment/stores surveyed will be recorded in the
survey report to be prepared in sextuplicate in form shown in Annexure 39.
Survey Report
The survey report and the proceedings of the Survey Committee will be signed by all
members of the Survey Committee and will be approved by the concerned General
Manager/CMM. Where the value exceeds Rs.5 lakhs, approval of concerned Director
will be sought for. The reserve value will be indicated only in one copy the survey
report, in red ink, in addition of the office copy. The original copy the survey report
containing the reserve value will be forwarded in a sealed of to the Dy.CMM (Store).
The reserve value will be treated as strictly confidential till the disposal action is
completed.
In the case of equipment/stores sold by auction or tender, the sale stores transfer note
(IST) is prepared in the usual manner giving reference to the survey report and the
sale value realized. The item will be charged off from the ledger/tools and plant
register, on the authority of the above stores transfer note. The Accounts Officer will
then necessary debit against ‘CV’ sundry debtors (purchasers) and afford necessary
credit to ‘C-I’ stores and spare parts’ of the concerned stores depot.
I.LOSS OF STORES
How Losses are Caused ?
Losses of stores can arise from any of the following causes viz:
• Losses in transit.
• Losses in handling the materials within or outside the stores depot including losses as
a result of retail issues.
• Losses due to deterioration or change in condition of materials in storage.
When the losses of stores are detected in a stores depot, the following actions will be taken by
the Depot Officer himself or instructions from the Controlling Officer viz:
(a) A preliminary investigation will be carried out to determine the circumstances under
which the loss occurred , and the report will be submitted to the Controlling Officer.
(b) Depending on the nature and value of loss involved the Controlling Officer will
appoint an Enquiry Committee to investigate the loss and to pin point the
responsibility.
(c) Based on the report of the Enquiry Committee the Project Officer/Agent/Controlling
Officer will recommend the course of action to be adopted in dealing with the loss,
namely, whether the loss should be recovered from the person responsible for the
same or whether it should be written off if it is not due to neglect on the part of any
individual.
(d) Simultaneously, the Project Officer/Agent will himself initiate or based on the
suggestions made by the Enquiry Committee implement remedial measures to avoid
recurrence of such losses in future.
Report on Losses
Every case of loss of stores will be reported by the Depot Officer to the Controlling Officer.
The report will indicate the full details of the loss, nature of the stores involved and their
value and a descriptive report will be rendered indicating the circumstances under which the
loss occurred, whether an enquiry was conducted and if so, the recommendations of the
Enquiry Committee, the manner in which the loss is proposed to be adjusted and the remedial
measures proposed to avoid recurrence of such losses in future.
The Depot Officer will retain three copies of the above report and forward two copies to the
Controlling Officer. The Controlling Officer will ensure that adequate explanation have been
furnished for the loss sustained. He will retain one copy of the report and forward one copy
together with his recommendations to the Dy.CMM (Stores) at the head quarters for obtaining
the sanction for write off from the competent authority. The CMM will examine the cause
carefully on behalf of the competent authority and obtained sanction for the write off of the
loss if there is full justification for the same. He will also communicate the sanction together
with any order of the competent authority to the General Manager and Depot Officer
concerned for further action. Where the value of the loss exceeds the power of the CMD, the
case will be referred to Secretary to the Board with the CMDs order thereon for obtaining
sanction of the Board of Directors.
12.1 On the receipt of the decision of the competent authority and sanction for the write off
the Depot Officer will fill in columns 9 & 10 on the three copies of the report retained
by him. He will then arrange to prepare the final stock adjustment vouchers in the
forms shown in the chapter on stock verification for adjusting the loss on the basis of
the write off sanction of the competent authority. The Depot officer will then post the
adjustment vouchers in the numerical ledgers. Two copies of the report of loss along
with two copies of the final stock adjustment vouchers will then be forwarded to the
Accounts Deptt. For necessary action in the price ledgers. In case the final stock
adjustment vouchers initiated as a result of Accounts stock verification, one copy of
the final stock adjustment vouchers will be forwarded to the Accounts Officer (SV)
by the Area Finance Officer for his information and record.
Items like rubber goods, common tyre, rethreading materials, chemicals, chemical coated
materials etc. have normal self life as prescribed by the manufacturer. These items are likely
to deteriorate in storage if the are store for periods in excess of their self life. The Depot
Officer will therefore ensure that items having prescribed self life are ordered in quantities
which are sufficient for consumption during the self life period only. The date of expiry of
such items should be clearly indicated on racks containing these stores so that the items are
consume before the date of expiry of their life. In respect of certain other items like black
adhesive tapes, although the self life may not be prescribed by the manufacturer, it is
desirable that self life of such items is determined by the stores depot as a result of their past
experience and quantities should be so ordered that they are consumed before the expiry of
their life.
The occurrence of losses, as a result of theft, fraud or neglect should be reported by the Depot
Officer to the Controlling Officer on telephone as soon as the incident comes to his notice.
The Depot Officer will visit the place of occurrence along with representative of the Security
Department and make a joint investigation report which will be forwarded to the Controlling
Officer within 24 hours of the time of occurrence of he incident. In case of theft/fraud a
complaint will be lodged with the Police. The Depot Officer will report in writing the details
of fraud/loss/theft to the Controlling Officer with copies to the CMM, Chief of Security,
Chief of Finance and Accounts. In all such cases the Depot Officer along with security officer
will carry out spot investigation and findings submitted to the higher officer within 2 days.
J. RETURN OF STORES
Materials and machinery/equipment returned to Stores Depot will be classified as
follows
• New and unused materials and machinery/equipment originally drawn for various
jobs but subsequently found surplus to requirements.
• Used but serviceable materials and machinery/equipment.
• Unserviceable red list items.
• Empties.
The colliery stress will draw materials to cater for their weekly/fortnightly consumption.
Any item held in colliery stores over and above one month requirement will be returned to the
respective Regional Stores/Area Stores on the Return Store Voucher
• Name of the colliery returned the stores with colliery code number.
• Regional stores/Area stores
• Material code and description of the item.
• Accounting unit
• Quantity returned
• Original issue vouchers number and date under which the item was drawn by the
colliery from the stores depot.
• Price of the item. If the original price is not available, the assessed value will be
given.
The return store vouchers will be signed by the Managers/Agent of the colliery.
The material with two copies of the returned store voucher will be delivered to the
regional store/area stores.
The material will be received in the Regional Store/Area Stores with two copies of
returns store vouchers, one copy of which duly signed in taken of having received the
material will be handed over to the colliery representative. Regional Stores/Area
Stores will treat this returns as received and raise store received vouchers for the
receipted material in normal manner. On the basis of the receipt vouchers in question
the Area Finance Manager will adjust his record and give credit to the colliery.
I
K. INVENTORY CONTROL
Introduction
Terminology
Inventory carrying cost – The hidden cost which normally does not appear in the documents
but is accrued on acquisition and maintaining the inventory. The principal elements of the
inventory carrying cost are detailed below :
(a) Interest on the investment
(b) Storage cost
(c) Physical deterioration or its prevention
(d) Obsolescence cost
(e) Insurance cost
(f) Handling & distribution.
Level
(a) Safety Stock Level : A certain amount of stock maintained to take any sudden
fluctuation of demand or of supply is known as safety stock level. The safety stock
acts as cuslrion or buffer.
There are many sophisticated ways to calculate safety stock level. One common way is to
calculate the standard deviation which is maximum consumption less the average
consumption/3.5 for normal distribution and square root of average consumption for poission
distribution and multiply standard deviation by a factor which in our condition may be taken
as 1, 2 & 3 depending upon the stock out cost. In coal industry the safety stock may be taken
as 1 to 4 months consumption depending upon the critically/availability of stores.
Alternatively it may be taken as 1/3rd of lead time consumption.
(b) Minimum Level : For most of the items it is taken as the same as safety stock level
but for some insurance/imported stores, the level may be higher than the safety stock
level.
(c) Maximum Level : The maximum amount of allowable stock which can be kept . This
level can be determined as stock level and twice the lead time consumption. It should
normally vary from 3 to 8 months consumption depending upon the lead time and
safety stock level.
(d) Re-order Level or Re-order Point : This is represented by safety stock and lead time
consumption. It is known as minimum level in stock holding.
(e) Lead Time (L.T.) : It is the time that elapses between voicing of a need for anything
and the time taken to satisfy that need by supplying the stores.
(f) Lead Time Consumption (L.T.C.) : The average consumption of any item during
the lead time is known as Lead Time Consumption.
Economic Order Quantity (ECQ) : As the term indicates, it means the Order Quantity
which is economic for the whole system. If the order is placed once in a year, the order cost
will be low but the inventory carrying cost will go up i.e. as the ordering cost goes down,
inventory carrying cost soars up, and vice versa. It has been seen that the balance between
these two costs is struck when the ordering cost is equal to Inventory Carrying Cost. In other
words, it is the optimum lot size of an item which should be ordered anytime to balance the
procurement cost and inventory carrying cost.
From the above principle the formula of calculating EOQ had been derived as follows:
Quantity to be ordered will be twice the difference between lead time and the safety stock. If
lead time is 3 months and safety stock is 1 month’s consumption (i.e. 1/3rd of lead time) the
ordering quantity will be 2(3-1) = 4 months consumption.
ABC Analysis : For the purpose of selective control, all the items are divided into
three main classes depending upon their annual usage value. This classification is known as
ABC Analysis.
The items having higher annual usage value say more than Rs.2 lakhs per item are
termed as A items, the items having medium annual usage (Say Rs.50,000/- to 2 Lakhs) are
termed as B items and items having low usage value Say (below Rs.50,000/-) are termed as C
items. This classification is irrespective of quantity consumed. The levels of A, B & C items
should constitute approximately 70%, 20% and 10% of the total annual usage value but as a
percentage of the total number of items, it should be of the order of 5%, 10% and 85%
respectively. The main advantage is that by controlling 5% or 10% of the total number of
items, 70% to 90% of the inventory is controlled.
HML Analysis : Since the total annual usage is considered in case of ABC analysis,
we may come across a few items which fall in ‘C’ or ‘B’ category, although the unit cost is
quite high. If the controls are exercised on the basis of ABC analysis only, the importance of
these items will be much less than ‘A’ or ‘B’ items even though the inventory as transaction
involves considerable amount. It is, therefore, necessary that unit cost of an item is also taken
into account in deciding its importance.
For the purpose, limits of unit costs should be fixed for high cost items (H), medium
cost items (M) and low cost items (L) and all items should be segregated into H, M & L
category depending on their unit cost. This analysis is quite helpful in deciding the safety
stock in relation to the availability of the material (SDE analysis).
(i) V – (Vital) : Items which render the equipment or the whole line operation in a
process totally and immediately inoperative. Non-availability of these spares would result in
loss of production.
(ii) E – (Essential) : Items which reduce the equipment performance but do not render it
in-operative. Non-availability of these items may result in temporary loss/dislocation of
production. Replacement can be delayed without effecting the equipment performance
seriously. Temporary repairing also some times possible.
(iii) D – (Desirable) : Items which are mostly non-functional and do not affect the
performance of the equipment.
(iv) XYZ Analysis : XYZ analysis is to stock what ABC analysis is to consumption. It is
the counterpart of ABC in stock.
It focuses the attention of the management on the materials which have been procured
at a faster rate than their consumption and hence its procurement policy needs a review or
have become obsolete and hence have to be disposed off.
(a) ‘X’ items – Items having stock of more than 12 months consumption.
(b) ‘Y’ items – Items for which no issues have been made for 2 to 3 years.
(c) ‘Z’ items – Items which have never been issued after procurement.
Periodicity
Also called the movement analysis, this is applicable mainly in the case of spares where the
speed at which the inventory is turned over varies within a vasr range. The applicability of
this analysis lies in the procurement of spares which can, in some cases be few and far in
between.
This analysis indicates the market estimations of the various items/in terms of their
availability. This forms the basis on which speculative purchasing can be done in the face of
different market conditions. This will be done by the technical cell of the Purchase
Department.
Method
1. These items are separated which are either controlled by the Govt. or have a very long
lead time (more than 2 years) e.g. iron & steel, conveyor beltings, cement etc. Those items
fall on one end of the S & E scale.
2. Items which are available ex-stock can be obtained without any difficulty, i.e. for
which the lead time can be practically put as zero, fall on the other end of the scale.
3. The remaining items for the difficult class. These have a definite positive lead time
attached to their procurement.
Periodicity
This will be a continuous exercise. As of new, most of the materials will fall in the
critical or difficult class and there will be very few termed easily available.
Average inventory : It is the sum of half the ordered quantity and safety stock.
To achieve the above goal, one or combination of the following systems are practiced.
The two bin system though effective, is very much labour intensive and also postdated as
compared to other two systems.
Stock level system is now a days widely used. Once the level of safety stock, reorder,
maximum and minimum are fixed along with economic order quantity, the inventories are
maintained within upper and lower limits. The levels are translated in the stock cards, (Bin
Card, kardveyor or kardex cards) and flags are attached to these cards of different colour, to
indicate the levels. For example, if the red is meant for safety stock level, immediate action is
taken when the stock level is indicated by red flag..
This is a very important subject, in as much as, most part of the surpluses that accrue
constitute the spare parts.
Only indenting of first set of spares for the equipment should be done on the basis of the
manufacturers recommended lists of spare parts, duly trimmed and adjusted so as not to
exceed 10 to 15% of the total value of the equipment. Here also it would be desirable to order
smaller quantities in the initial stage and only after gaining experience by maintaining proper
records of consumption for each type of equipment, larger quantities of spares should be
procured. The indents covering the 1st set of spares will be processed simultaneously along
with the indents for equipment in order to ensure availability of full backing of initial spares
for preventive maintenance when the new equipment are put into commission.
The second set of spares will be provided to cover the maintenance requirements for the third
and fourth year of operation of the equipment. The range of spares indented will be based on
the manufacturer’s recommendations suitably adjusted in the light of experience gained in the
first two years of equipment operation and the maintenance scales developed by engineers. It
is very important to build up proper consumption data right from the stage of commissioning
the equipment which should from the basis for all further indenting. The provisioning of
subsequent requirements of spare parts will be done by the users based on the consumption
pattern duly projected to cover the anticipated requirements and taking into consideration the
actual working conditions and the maintenance scales.
L. FINANCIAL
Journal Voucher
A document that provides written authorization for a financial transaction, often used in place
of or supplementary to the journals or registers. It is commonly used for disbursements from
the petty cash account. In terms of Business we do a lot of Financial Transactions on a day to
day basis, There is every possibility that we loose track of those crucial transactions.
So we post/maintain them in a Book "book keeping system" is an accounting term, all such
transactions are logged here, each such transaction is called a Journal Entry.
When preparing journal vouchers, there are a number of pieces of information that are
important in preparing a complete transaction:
• The transaction date will determine the accounting period that the transaction is recorded to.
It is only possible to record transactions to open accounting periods
• Descriptions are important to identify the nature of the transaction and to provide reference
to any document numbers that are being corrected or adjusted
• Identify the journal type that is appropriate for the transaction you wish to process.
ERROR CHECKING
As produced by office, Error checking of issue transaction and received material receipt and
issue and received transaction records of April 2010 to June 2010. Find some mistake or
errors which have been informed to Dy. Finance Manager, Orient Area, (MCL).
Accounts Department (Internal Audit) will be responsible for stock verification of stores,
materials, plant and machinery. It will be carried out departmentally under instructions from
the Area Material Manager by the stores personnel of the stores depots/units independently
Accounts Department will carry out valuation of the receipt voucher by adding sales tax,
excise duty, freight charges, wharfage/demurrage, packing/handling charges etc. to the basic
price and pass the supplier’s bill. Total value will be shown in both the copies of receipt
vouchers. White copy will be retained by the Accounts and green copy sent to data processing
section for carrying out adjustments in the value of stores received. The green copy will be
sent to Kardex Section for filling.
4. COMPANY PROFILE
ORGANISTION OF MCL
MCL has nine areas in two coalfields with 7 underground mines and 15 opencast mines.
ORIENT AREA
5. FUTURE PLAN
(Rupees in Crore)
Company 2009-10 (Quick 2008-09 (Actual)
estimate)
ECL 152.36 -2105.70
BCCL 402.29 -1376.99
7. BIBLOGRAPHY
WEBSITES:-
• http://www.azinventorymanagement.com/ecomicsorderquantity.htm
• http://www.azinventorymanagement.com/inflationeoq.htm
• http://www.azinventorymanagement.com/safetystock.htm
• http://www.azinventorymanagement.com/stocklevelsystem.htm
• http://www.azinventorymanagement.com/cost to carry.htm
• http://business.mapsofindia.com/aluminium
• http://www.equitymaster.com/detail.asp?date=3/26/2009&story=2
(a) All fires have small beginning and can be effectively tackled at this stage if
suitable fire fighting equipments are readily available. Ofcourse suitability,
serviceability and most important the training in the use of these equipments are
equally important for effective control of fire in their initial stages. The persons
selected to man fire fighting organization should be carefully selected and
properly trained in the use and maintenance of the fire fighting equipments.
(b) Material planning, programming and indenting are integrated functions of
materials management involving most of the departments of the subsidiaries of
CIL headquarters. Unless every officer/department/section carry out their
respective functions in time and with company objectives in mind, problems of
overstocking and stock-outs cannot be tackled successfully. Timely actions by
all concerned and co-ordination at different levels will ensure optimum
utilization of inputs, resulting in reduction I costs and efficiency all round
(c) Accounting and consuming units should prepare proper type of document
carefully indicating the correct item code No., Unit of measure, store code,
accounts code, quantity and value. This is the essence of computerization and is
very important.
(d) Accounting units should submit the documents to Data Processing Center
strictly as per the laid down time schedule. Failure to do this results in creation
of errors and reporting of incorrect inventory figures.
(e) The initial check list should be promptly scrutinized within 48 hours and return
to fully corrected to EDP.
(f) Error list should be attended to by all concerned immediately and corrective
action initiated within 10 days of receipt.
RECOMMENDATIONS
• We have seen that through selective control techniques stores can dispose
the non moving items which are increasing inventory but this process
does not eliminate all non moving items. So selective control techniques
should be better used so that most of the non moving items are disposed
off immediately. Other selective control techniques such as VED can also
be used.
• The company orders the raw materials every months. This can
increase the total cost of inventory. Thus company should use
EOQ model for procurement of raw materials as this provide
right level of inventory with minimum cost.