Académique Documents
Professionnel Documents
Culture Documents
Authors:
DEPARTMENT OF MARINE
ENGINEERING
FACULTY OF MARINE TECHNOLOGY - ITS
2018
Educate – Enhance – Empower Version: 00/ feb
2018
Halaman ini sengaja dikosongkan
This page is intentionally left blank
DOCUMENT : 01/D3-GFS/II/2018
NO
DISCLAIMER
1. Pendahuluan / Overview..................................................................... 1
2. Prosedur / Procedure........................................................................... 1
3. Laporan / Report................................................................................. 3
4. Standar Dokumentasi / Standard of Documentation........................... 5
2. PROSEDUR / PROCEDURE
Prosedur dalam pengambilan
mata kuliah Desain III
(ME141326) General
Arrangement, Fire Control &
Safety Plan secara garis besar
dapat dilihat pada
Lampiran B.
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes
only
DESIGN III
GENERAL Doc. No 01/ D3-
ARRANGEMENT, GFS/II/2018
FIRE CONTROL & SAFETY
PLAN
Rev. 00 Page 2 of 26
GUIDELINES Date: February 2018
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purpose s
only
DESIGN III
GENERAL Doc. No 01/ D3-
ARRANGEMENT, GFS/II/2018
FIRE CONTROL & SAFETY
PLAN
Rev. 00 Page 3 of 26
GUIDELINES Date: February 2018
9. Calculation of Chain
Locker Volume & Mud
3. LAPORAN / REPORT Box
Struktur laporan Design III / 10.Arrangement of the Fire
General Arrangement, Fire Control Plan
Control & Safety Plan terdiri dari 11.Arrangement of the
3 bagian utama, yaitu: Safety Plan
a. Filosofi Desain
b. Rules & Guildelines
yang digunakan
c. Detail Perhitungan
d. Lampiran (Spect, Drawing,
dll)
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes
only
DESIGN III
GENERAL Doc. No 01/ D3-
ARRANGEMENT, GFS/II/2018
FIRE CONTROL & SAFETY
PLAN
Rev. 00 Page 4 of 26
GUIDELINES Date: February 2018
▪
Fire Control Plan dan
Safety Plan
3.3 Lampiran
3.3.1 Spesifikasi
Lampiran spesifikasi dapat
berupa brosur, catalog
engine, aturan yang
digunakan.
3.3.2 Gambar
Gambar yang akan
dikumpulkan adalah:
▪
Gambar General
Arrangement Kapal.
Tampak Depan, Tampak
Atas (Terdiri dari masing-
masing deck dan
kompartemen kapal),
Tampak Samping
See Appendix A for
See Appendix A for format of calculation
writing report outline. detail.
3.3 Attachment
3.2 Detail of Calcuation
Detail of calculation supports 3.3.1 Specification
the content of the design The attachment for
philosophy. The calculation specification can be
details are written in format brochure, engine project
spreadsheet (Ms. Excel). guide, rules & regulations,
Additional calculations may be etc.
added when considered
necessary to be added. Detail 3.3.2 Drawing
of calculation consist of (at The drawing to be submitted
least): are:
a. list of code / reference
▪
Gerenal Arrangement
b. calculation algorithm Plan. Front View, Top
View (Consists of each
c. input of parameter deck and compartment
design (given of the vessel), and Side
parameter) View
▪
d. output of parameters design Fire Control Plan and
Safety Plan
e. detail of calculation
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes
only
DESIGN III
GENERAL Doc. No 01/ D3-
ARRANGEMENT, GFS/II/2018
FIRE CONTROL & SAFETY
PLAN
Rev. 00 Page 5 of 26
GUIDELINES Date: February 2018
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes
only
DESIGN III
GENERAL Doc. No 01/ D3-
ARRANGEMENT, GFS/II/2018
FIRE CONTROL & SAFETY
PLAN
Rev. 00 Page 6 of 26
GUIDELINES Date: February 2018
spesifikasi peralatan
e. Spasi dalam file html, pdf
i. Spasi yang atau format lain
digunakan untuk iii. Gambar Desain
penulisan laporan dalam bentuk
adalah 1 (satu) autocad.
spasi. c. Satu CD = Hasil satu
kelompok
4.2 Format Gambar
a. Ukuran kertas gambar
adalah A1 (594 mm x
841 mm)
b. garis tepi gambar adalah
20
mm dari tepi kertas
c. skala gambar
disesuaikan dengan
ukuran kertas
d. kepala gambar berukuran
120
mm x 60 mm
LAMPIRAN A
APPENDIX A
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes
only
DESIGN III
GENERAL Doc. No 01/ D3-
ARRANGEMENT, GFS/II/2018
FIRE CONTROL & SAFETY
PLAN
Rev. 00 Page 8 of 26
GUIDELINES Date: February 2018
Supervisor:
(Ir. Sardono Sarwito, M.Sc)
(NIP. 1960 0319 1987 01 1001)
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes
only
DESIGN III
GENERAL Doc. No 01/ D3-
ARRANGEMENT, GFS/II/2018
FIRE CONTROL & SAFETY
PLAN
Rev. 00 Page 15 of 26
GUIDELINES Date: February 2018
II. OBJECTIVES
The things that we must understand about Ships Crew are:
1. Understand the Task of the crew in a ship.
2. Calculate the amount of crew based on the regulations
according to
“Peraturan Pemerintah”.
III. REFERENCES
1. BKI Volume III for Machinery Installations 2016 Edition
2. Peraturan Pemerintah
3. MLC
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes
only
DESIGN III
GENERAL Doc. No 01/ D3-
ARRANGEMENT, GFS/II/2018
FIRE CONTROL & SAFETY
PLAN
GUIDELIN Rev. 00 Page 16 of 26
01 - 42 XX
Doc. YYZZ –
NAME OF No. RP
SYSTEM Rev.
BB
(14pt Franklin Gothic
Book) No.
Page CC of DD
Boatswai Rooms of Boatswain
2. n SOLAS minimun
Rooms Chapter size =
Supervisor :
Coordinator :
Supervisor :
Coordinator :
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes
only
DESIGN III
GENERAL Doc. No 01/ D3-
ARRANGEMENT, GFS/II/2018
FIRE CONTROL & SAFETY
PLAN
Rev. 00 Page 19 of 26
GUIDELINES Date: February 2018
LAMPIRAN C – Form D3
APPENDIX C – Design 3 Forms
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes
only
DESAIN III : GENERAL ARRANGEMENT AND SAFETY
PLAN FORM 00
CHEATING FREE STATEMENT
Signed
( )
Nrp.
DEPARTMENT OF MARINE ENGINEERING – ITS
DESAIN III : GENERAL ARRANGEMENT & SAFETY
FORM 01
PLAN
DOCUMENT OF ASSIGNMENT
Semester : Odd / Even Year : Rev2 Feb. 2017
STUDENT DATA
Name of Student
Student’s Register No.
Name of Supervisor
Number of Attempt(s)
TASK DATA
General Arrangement Calculation and Drawing of General Arrangement according to Statutory and Class
Calculation and Drawing of Capacity Plan according to the operational design of the
Capacity Plan ships, and also compliance with the rules & guidelines of Class and Statutory
Calculation and Drawing of Safety & Fire Control Plan according to the operational
design of the ships, and also compliance with the rules & guidelines of Class and
Safety & Fire Control Plan Statutory
Reports Drawing Every chapter on Reports needs to be written in English
7 Calculation and location selection of the Frame spacing and double bottom height
Calculation and location selection for the Sterntube Bulkhead, Engine Room Until
8 Bulkhead, Cargo Space Bulkhead, and Collision Bulkhead week
Arrangement and Calculation ot the Rudder (Rudder Type & Power of Rudder
9 Machineries Needed) 5
10 Arrangement of the Decks
11 Calculation of the Crew Needs
5 Doc. No. 05 – 42 13 101 005 - Calculation of Tank Capacity & Pay load
TC
15 Dwg no. 02 - 42 13 101 005 – Colored Drawing of Fire Control Plan & Safety Plan (All
FSP Reports & Drawings)
PROGRESS III : Until Safety & Fire Plan
Final Evaluation (Week 16)
Semester Year
Name NRP
Supervisor NIP
Write your reason why you are late to apply for the DESIGN-III Course
Surabaya,
Student Advisor
( ) ( )
NRP. NIP.
Head of Undergraduate Department
( )
NIP.
DESAIN III : GENERAL ARRANGEMENT & SAFETY
PLAN FORM 05
ASSISTANCE LOGBOOK
Semester : Odd / Even Year : Rev2 Jan. 2017
10
11
12
13
14
15
16
DESAINIII: RENCANA UMUM DAN SAFETY PLAN
(ME 141326) FORM 06
FORM ASSESTMENT
Rev 2 Feb-17
ASSESTMENT CRITERIA:
1. DOCUMENTS:
(1) Structures & Writing Format of the Report. (2) Completeness and depth of
the report content. (3) Conformity of report contents with drawings. (4)
Compliance with Rules / Regulations / Maker Recommendations
2. DRAWINGS :
(1) Tidiness. (2) Completeness and consistency of coding and symbols. (3)
Completeness of the design parameters. (4) Equipment and Instrument
completeness. (5) Compliance with reports and Rules & Regulation (6)
Conformity with image scale.
3. UNDERSTANDING:
(1) Describing a concept design. (2) Describe the contents of the report and
design drawings in detail (3) Connecting between the contents of the report
with the Drawings. (4) Ability of estimation based on engineering logic. (5)
Attitude. (6) Assistance
SCORE :