Académique Documents
Professionnel Documents
Culture Documents
Scenario: You have been hired as a PRODUCT DEVELOPER by a company that is trying to create a means of
cheaply and efficiently filtering fine air particles. Your company is in Chiang Mai so you will work using local
materials.
Understanding how systems interact can inspire the creation of solutions to the consequences of local and global environmental issues.
Task Description
GOAL To create an air filtration device which is suited to the needs of your intended clients.
ROLE You will be the product researcher, designer, builder, and tester. You will also be the expert on human physiology and the
principles of physics inherent to air filtration.
SITUATION You are in the first few weeks of a new job as a PRODUCT DEVELOPER.
STANDARDS You will be assessed against MYP Design Criteria A - D, MYP Science Criteria A + D, and MYP IDU Criteria A - D.
Task Clarification:
PLANNING DRAWINGS
Time:
● 10 - 15 minutes
Tools:
● Knife or scissors
Materials:
● Box
Time:
● 5 minutes
Tools:
●
Materials
● Filter paper
Time:
● 5 - 10 minutes
Tools:
● Knife or scissors
Materials:
●
Time:
● 10 - 15 minutes
Tools:
● Tape or thing can tape fan
Materials:
● 12v 120mm fan which connected with 12v adapter.
Time:
● 5 - 10 minutes
Tools:
● Tape or things can stick it with top of the fan
Materials:
● Filter paper
Time:
● 10 minutes
Tools:
● Pin for make a hole for fan grill
Materials:
● Fan grill
So basically this product will be effectively work. Because I put the filter paper at the front of the box to filter the air before air goes out of the
product. And I put one more filter paper in front of fan to filter air once again. The reason for me to make holes to put filter paper is it will be easier
for my client to clean the product while she is using it.
LOGICAL PLAN
Step 1: make a box with some cutting for filter paper place. And prepare filter paper for putting Time: 20 minutes.
them in to box. Tools: scissor.
Materials: box, filter paper.
Step 2: put 12v 120mm fan and adapter together. Time: 20 minutes.
Tools: electric tape.
Materials: 12v 120mm fan and adapter.
Step 3: with a glue gun stick fan with the top of the box. Time: 10 minutes.
Tools: glue gun.
Materials: box with the filter paper, fan with
adapter.
Step 4: make a 4 holes for fan grill and put the fan grill above the fan with a box. Time: 20 minutes.
Tools: pin for make a holes.
Materials: fan grill and box with all 3 steps
working.
CREATING AND IMPROVING THE SOLUTION
Level 1-2 Level 3-4 Level 5-6 Level 7-8
i. Creates the solution, which ii. Demonstrates satisfactory ii. Demonstrates competent ii. Demonstrates excellent
functions poorly and is technical skills when making technical skills when technical skills when making the
presented in an incomplete the solution. making the solution. solution.
form. iii. Creates the solution, which iii. Creates the solution, which iii. Follows the plan to create the
partially functions and is functions as intended and solution, which functions as
adequately presented. is presented appropriately. intended and is presented
iv. Outlines changes made to iv. Describes changes made to appropriately.
the chosen design and plan the chosen design and plan iv. Fully justifies changes made to
when making the solution. when making the solution. the chosen design and plan
when making the solution.
Task Clarification:
Description of changes made to the Design or Plan: same as my plan. Justification for making these changes: Nothing changed.
Date: Feb/22
Step-by-Step Description:
● Tape the part where I connected fan and adaptor with rubber
tape. For protect electric accident.
Step-by-Step Description:
● Tape the side parts because when I cut the middle part of the
box, side places are too weak.
Description of changes made to the Design or Plan: tape side parts. Justification for making these changes: it’s too weak, I couldn’t think of
that case.
Date: Feb/26
Step-by-Step Description:
● Prepare filter material. For me, I am using kitchen paper towel
because on my Science experiment I got the best filtration
material between any other materials.
Step-by-Step Description:
● Cut kitchen paper towel to fit on my box hole and stick it inside.
Step-by-Step Description:
● I cut the top part of box for fan and we made the fan line out
because it’s better to have line outside.
Description of changes made to the Design or Plan: tape filter material Justification for making these changes: Box was too weak to cut as 3
inside. parts so I just decide to stick it inside.