Académique Documents
Professionnel Documents
Culture Documents
2
WALLS
© Copyright 2017 - BIM Pure Productions - revitpure.com - demo BASICS
ADJUST WALLS
EDIT PROFILE: Need a wall with a specific profile in elevation?
Select the wall and use the Edit Profile Tool. Use the purple
boundary lines to create the profile you need.
Align can be also be used to Rotate element. Click the lock icon to
constraint elements together, meaning they’ll move simultaneously.
7.3
ROOFS
© Copyright 2017 - BIM Pure Productions - revitpure.com - demo BASICS
In the properties, set a cutoff level to cut the roof horizontally. This can
be used to create a gambrel roof and other roof type where the slope is
interrupted.
You want a fully curved sexy roof? Use the Roof by Extrusion tool.
First, set an horizontal Workplane. Then draw the profile line of the
desired roof. That line represents the Top of the completed roof. Adjust
Extrusion Start/End to make sure the roof is the correct length.
10.6
CURTAIN WALLS
© Copyright 2017 - BIM Pure Productions - revitpure.com - demo BASICS
If you replace a curtain panel by a wall, make sure to set the offset in the
instance properties, under Location Line Offset. A negative value for the
offset will push the wall to the interior side.
Curtain panels can be replaced by a door. These doors are different from
regular doors: their size is dictated by the space between curtain grids.
Make sure to delete the mullion below the door.
14.2
MATERIALS
© Copyright 2017 - BIM Pure Productions - revitpure.com - demo BASICS
3- CROP REGION
Use Edit Crop tool if you want something else than a rectangle for
the shape of the crop. Draw boundary lines to fit required shape.
Overrides can also be used for Materials. Below we modify the material
override for demolished elements.