Académique Documents
Professionnel Documents
Culture Documents
Indicators to Master
Mastering the basics of technical
indicators
Technical indicators can appear arcane, opaque and difficult to understand. But it needn’t be this way and once mastered they are indispensable tools for traders.
Whilst the construction of indicators and oscillators is often complex, applying them and understanding how to use them to generate valuable trading signals is a lot
more straightforward. In this short guide we will examine five different indicators and explain how to use them.
Indicators can generally be divided into two camps – trend following and momentum. Trend following indicators tend to lag price action. Momentum measures the rate
that prices change and is said to lead price action.
The first two indicators in this guide are trend-following in nature. These are the different moving averages and Bollinger Bands. Our final two indicators – the RSI and
Stochastics – are momentum indicators. The exception and one that we deal with third is the MACD, or moving average convergence divergence, which combines aspects of
trend-following and momentum to produce one of the most popular and valuable technical indicators.
1 Moving Averages
A moving average is one of the simplest and most popular indicators that traders use. The aim is to filter out ‘noise’
by smoothing short-term fluctuations in price action. A moving average is a lagging indicator – it is good at showing a
trend but signals tend to be given after a change in the price action.
There are 3 major types of moving average - the Simple or Arithmetic, the Weighted and the Exponential. These vary in
their construction and tend to produce differing results using the same inputs, but their purpose is exactly the same.
Time frames for moving averages vary and can be based on hours, days, weeks or even years. Intervals can also be
changed, depending on the type of security being traded and the approach of the trader. For example, in equities
trading 50-day and 200-day averages are common. In commodities, 4-day, 9-day and 18-day averages have become
quite standard.
Commonly closing prices are used but it is possible to use open, high, low or even typical prices as the basis for the
average.
In addition to providing trading signals, averages can act as support and resistance levels when determining price
targets.
Simple Moving Average Weighted Moving Average
This simply takes an average of the closing price (for simplicity we’ll assume the close in all our examples) for each of the last n days of A weighted moving average differs by adding a weighting to each
the average. So if you have a 20-day moving average, the SMA is the sum of all the closes divided by 20. The simple average reacts the day’s price. Usually this gives extra weight to the most recent day,
slowest of the three – this means signals tend to be generated later, but it produces fewer false signals or ‘whipsaws’. and diminishing weighting to the preceding days.
The below chart shows a simple 20-day moving average plotted against price action. For example, a 6-day weighted moving average could be weighted
in sixths: the most recent day gets a weighting of 6/6, the fifth day
FTSE 100 moving around its 20-day simple moving average is weighted 5/6, the fourth 4/6 and so on. In order to get to the
moving average you multiply the input of day six by 6, the input
of day five by 5, the input of day 4 by four and so on. These values
are then added together and the sum divided by the sum of the
multipliers – in this case 21.
You don’t need to know how to calculate it; the point is just to
understand that a weighted moving average set up like this gives
added importance to the most recent day’s price action and as a
result can produce signals sooner as changes in the trend appear
earlier.
4
Key points about using moving averages
Moving averages are useful in viewing trends and revealing Strong signals can be generated by employing more than one cross’ and signal significant strength in the market. A shorter
potential reversals. A market that is above its moving average is average. For instance when a shorter moving average moves up average falling through a longer average that is also falling is called
said to be in a rising trend. One that is below a moving average may through a longer average that is also rising, it is known as a ‘golden a dead cross and signals weakness.
be said to be in a falling trend. Sideways trends can be identified
when a market moves either side of a moving average. An example of a ‘golden cross’ when the 50-day SMA moves from below to above the 200-day SMA
5
2
Bollinger Bands
Bollinger Bands make use of moving averages to produce trading signals based on market volatility. Devised by John
Bollinger, they are among the simplest technical indicators to use.
SIGNALS
You can use the bands for signals. For example if a reversal pattern
on the price chart – such as a double top, head and shoulders,
double bottom – occurs at the extreme of the band, it can be a
stronger signal than if it occurs in the middle of the bands.
For example, a double top with a first top beyond the upper band
limit, with the second top forming below the upper band, may
be considered a fairly strong signal that the market is about to
reverse. (See chart opposite) Source: ETX Capital
7
NARROW/WIDE
Bollinger Bands tend to widen as volatility increases and narrow the indicator in which direction you can expect this move to occur.
when volatility recedes. Usually you can expect a sharp move Therefore it is useful to use this in conjunction with other technical
in the price of the security when the bands tighten. But while a tools, such as momentum indicators, chart patterns, candlestick
narrowing of the bands foreshadows a big move, it is unclear from formations, etc.
USDJPY price action showing how tightening of bands can predict a sharp move PRICE TARGETS
Bollinger Bands are useful in determining specific price targets.
This is because prices have a tendency to swing from one extreme
to the other. Therefore if the security’s price touches the upper
band, a reasonable price target would constitute the lower band
level. However, as with oversold and overbought indicators, it is
Bands narrow worth noting that prices are as likely to continue to move beyond
the bands as they are to retrace back between the two bands.
Indeed, according to John Bollinger, when markets move outside
the bands, a close outside the bands act as continuation signals,
not reversal signals.
8
3 MACD
Moving average convergence divergence – MACD – is one of the most popular tools for traders. It incorporates trend
following and momentum characteristics.
This indicator shows the relationship between two moving averages to identify changes in market trends.
Construction of MACD
The MACD line shows the difference between two exponential moving averages (EMAs). Usually this involves subtracting
the 26-day EMA from the 12-day EMA.
A nine-day EMA of the MACD line is the third element and this is known as the Signal or Trigger line. When the two lines
crossover it’s taken as a signal that a change in trend is likely.
When adding your MACD indicator to your chart, you have the option of defining these moving averages according to
your own desired time frames, however most people stick to the 26-12-9
Using MACD SIGNAL LINE CROSSOVER
This type of crossover occurs when the MACD line crosses the red above the signal line. A bearish crossover occurs when the MACD
DIVERGENCE signal/trigger line. A bullish crossover occurs when the MACD rises turns down to cross below the signal line.
If the security price diverges from the MACD, it can indicate the
end of the current trend. For example, if a security keeps rising Bearish signal line crossover on EURGBP
and the MACD line starts falling, it could mean the rally is about to
end.
This does not need to mean all-time highs and lows. Typically,
a bullish divergence can occur when the security falls to a new
reaction low, and the MACD line fails to follow suit and sets higher
lows.
CENTRELINE CROSSOVER
A centreline crossover occurs when the MACD Line moves either
above the zero line to turn positive or below to turn negative. A
bullish centreline crossover occurs when the 12-day EMA of the
security moves above the 26-day EMA. A bearish crossover occurs
when the 12-day EMA moves below the 26-day EMA.
10
OVERBOUGHT/OVERSOLD
Also watch for the MACD moving further away from the centre line Strength Index, it can be hard to define precise levels of where can produce stronger signals. For example, in the below chart of
(in either direction). This suggests the shorter 12-day average is a market may be regarded as overextended. Looking at historic the Dow Jones industrial average, the MACD line looks extremely
accelerating away from the 26-day EMA, and therefore points to a levels and comparing is often a good way to judge if a market is overbought by historic standards, rising above 465. When the
strengthening trend. overextended. bearish signal line crossover occurred in such heavily overbought
territory on Jan 29th, it proved a very reliable sell signal.
In this way it can also be used to define overbought or oversold You can combine crossover signals with overbought and oversold
conditions, although unlike other indicators like the Relative indicators – indeed crossovers in overbought or oversold territory
11
4
RSI
The Relative Strength Index (RSI) is one the simplest ways to gauge momentum. Developed by J. Welles Wilder in the
1970s, it’s based on the simple notion that prices will tend to close higher in an uptrend and close lower in a downtrend.
RSI is constructed by comparing the average gains on up days and average losses on down days over a given period,
usually 14 days. A shorter time period may be appropriate for less volatile markets.
The reading is a number between 0 and 100. Rising markets will produce readings closer to 100, while falling markets
will result in readings closer to zero.
Using RSI
OVERBOUGHT/OVERSOLD
The RSI is very useful for determining whether a market is overextended. Markets are said to be overbought if the RSI rises above 70 and oversold if it falls below
30. This can be modified to 80/20 for a market that is a strong trend.
13
FAILURE SWINGS BEARISH FAILURE SWING
Divergence is the most important characteristic of the RSI. By But the RSI indicator provides a more precise version of divergence For a bearish failure, or failure swing top, the RSI enters overbought
divergence, we mean the indicator moving in an opposite direction known as ‘failure swings’ which offer a confirmation of the trend territory – above 70 – and then makes a lower high, which may or
(diverging) from the security. For instance, if the RSI starts to fall but change signalled by divergence. may not be below 70. The security continues to rise and makes a
the security keeps setting new reaction highs, it can foreshadow a higher high. This creates bearish divergence with a trading signal
reversal. coming when the RSI lower reaction low.
14
BULLISH FAILURE SWING
For a bullish failure swing, also known as a failure swing bottom, the RSI enters oversold territory – below 30 – and then makes a higher low, often but not always above the 30 level. At the same time the
security continues to fall and makes a lower low. This situation would be termed simple bullish divergence. The signal comes when the RSI forms a new higher reaction high.
market continues to
make lower lows
15
Stochastics
5 Stochastics is a momentum indicator that shows where the most recent closing price fits in relation to the price range
over a predetermined number of days, usually 14. The indicator is based on the premise that prices have a tendency to
close at or near highs in when the security is in an upward trend, and at or near lows when prices are trending lower.
A reversal signal is given on divergence. For example if the market continues to make new highs but prices are tending
to settle at the lows of the day, it can foreshadow a reversal in the uptrend. From a logical view point this makes sense
as if prices are not able to settle at the highs of the day it suggests buyers are losing interest and taking profits sooner.
Construction of stochastics
Whilst you do not need to know the formulae used to work out the indicator, it is useful to how the basis of its
construction so you can apply it to your trading. The indicator usually incorporates two lines, the %K and %D lines
which oscillate between 0 and 100.
The %K shows the latest close in relation to the average range of the last 14 days. The %D line takes a 3-day moving
average of that line.
For ‘slow stochastics’, which is more commonly used, the data is further smoothed by taking a moving average (usually
3 or 5 days) of the moving average.
In this situation the %K line is the 3-day moving average of the simple 14-day stochastics (the original %D line), and the
%D line is a 3 or 5-day moving average of the new, ‘slow’ %K line.
Using stochastics
OVERBOUGHT/OVERSOLD
Stochastics is useful in determining whether a market is when the %K moves above 80 and oversold when it falls below 20. despite being overbought and continue to fall when it is already
overextended. Usually we would say that the security is overbought As with any indicator of this sort, a security can continue to rise oversold.
%K
%D
17
CROSSOVERS
Buy and sell signals are given on crossovers – when the %K line the %K line moves above the %D line. This agrees with the premise If a crossover occurs whilst the market is considered overbought
moves above or below the %D line. of using multiple moving averages. or oversold, it can have greater validity. As an example, if a bearish
crossover occurs while the stochastics show overbought conditions
When the %K line (which is faster moving and more responsive These signals are quite frequent and must be treated with caution (i.e. above 80), the trader would then look for a move back below
to short term movements in price) moves below the %D line, it is – usually traders look for other conditions to be met before a 80 for confirmation.
considered a bearish crossover. A bullish crossover occurs when simple crossover is seen as a strong signal.
Bullish crossover as %K line moves above %D line and out of oversold territory
oversold conditions
bullish crossover
18
Using the same chart pattern but applying the stochastics indicator the principle that momentum leads price action, while moving This is a good example of how it is useful to use more than one
in addition to the MACD reveals how the stochastics crossover averages are lagging indicators that follow prices. The delay in the indicator, with a particular emphasis on using indicators that are
provides an earlier signal of trend reversal. This agrees with MACD signal is noticeable versus that provided by the stochastics. based on different data inputs to derive their signals.
DIVERGENCE
As with other momentum indicators, divergence between the
stochastics and the security’s price action can signal a reversal.
Most often these may be used to confirm a crossover’s validity. For
example, a bullish crossover accompanied by bullish or positive
divergence would be a stronger signal. If the market is already
in oversold territory and moves above 20, at the same time as a
bullish crossover and positive/bullish divergence, it would be a
very strong signal.
bearish signal
bullish signal
19
Using indicators on TraderPro
To use the indicators on the TraderPro platform, select the
indicators list under the f button on the top left of your chart. Once
you hover over this you can scroll through the full list of indicators
When you select your indicator, a sidepanel will appear on the right of the chart that allows you to customise your indicator. This
available.
sidepanel will also display any other indicators you have already selected.
For example, on the example shown, with the MACD indicator you can select the length of your moving averages. In this case the default
12, 26 and 9-day averages have been selected. You can also choose whether you wish the average to apply to the open, high, low or
closing price. In this example we have stuck with the close. You can also change the colours of the lines and of the histogram. Save the
settings to apply them to your chart.
21
Forex | CFDs | Spread Betting
DISCLAIMER
Any information, analysis, opinion, commentary or research-based material in this document is for information purposes only and is not, in any circumstances, intended to be an offer of, or solicitation for, a transaction in
any financial instrument. No representation or warranty is given as to the accuracy or completeness of this information. Any person acting on it does so entirely at their own risk and ETX Capital accepts no responsibility for
any adverse trading decisions. You should seek independent advice if you do not understand the associated risks. Past performance is not indicative of future results. ETX Capital is authorised and regulated by the Financial
Conduct Authority with Financial Services register number 124721.