Académique Documents
Professionnel Documents
Culture Documents
[A] 2πi
[B] -2πi
[C] 0
[D] -1
Q.2) Find the root of the equa on 2x – log10x= 7 which lies between 3.5 and 4 using Regula Falsi method.
Answer: _________________
Q.3) An urn contains nine balls. Two of which are red, three blue and four black. Three balls are drawn from the
urn at random, what is the probability that the three balls are of different colour?
[A] 2/7
[B] 4/7
[C] 5/8
[D] 4/5
Q.4) Find the unit normal to the surface xy + yz +zx = 3 at the point (1, 1, 1).
[A]
[B]
[C]
[D]
https://exergic.learnyst.com/admin/products#all-questions/59184 1/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.6) For given stress condi ons, if normal stress at plane P is 5 MPa (compressive), find the value of normal stress
σn ac ng on plane N (in MPa) as shown.
Answer: _________________
Q.7) Calculate the maximum shear stress τmax (in kPa) for the shown wooden beam, carrying a uniform load of
22.5 kN/m (which includes the weight of the beam). The length of beam is 1.95 m and cross sec on is rectangular
with width 150 mm and height 300 mm. The beam is simply supported as shown in the figure.
Answer: _________________
https://exergic.learnyst.com/admin/products#all-questions/59184 2/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.8)
The given figure shows a cam with a circular profile, rota ng with a uniform angular velocity of ωrad/s. What is
the nature of displacement of the follower?
[A] Uniform
[B] Parabolic
Q.10) The correct order for material removal rate (MRR) for non-tradi onal machining process is:
[A] ECM > EDM > EBM >LBM
Q.11) In a certain water flow at 20°C, bubbles form when it reached cri cal cavita on number, Ca = 0.25, where
Ca =
If Pa = 100 kPa (absolute) and vapour pressure is 4 kPa (absolute), for what water velocity(in km/hr) will bubbles
form?
Answer: _________________
https://exergic.learnyst.com/admin/products#all-questions/59184 3/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.12) The velocity field given by v = (axy - z³) i + (a-2)x² j + (1-a)xz² k is irrota onal. The value of ‘a’ in the
expression of velocity field is
[A] 4
[B] 2
[C] 3
[D] 1
Q.13) For a rela vely low Reynolds number flow in 600 mm diameter and 30 m long pipeline, the pressure drop is
70 kPa. What is the wall shear stress (in N/m²)?
Answer: _________________
Q.14) A bracket is shown in the figure which is held by bolted joints. For the bolted joint shown, the primary shear
force in bolt 3 is:
[A] 8.59 kN
[B] 3.75 kN
[C] 7.35 kN
https://exergic.learnyst.com/admin/products#all-questions/59184 4/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.16) A sta onary insulated rigid tank contains 1 kg of an ideal gas with constant specific heat (cv = 0.7 kJ/kg-K
and cp = 1.0 kJ/kg-K) at 27°C and 300 kPa. A paddle wheel with a power capacity of 20 W is operated inside the
tank for 15 minutes. The final pressure of air (in kPa) in the tank will be _________.
Answer: _________________
1. Tds = du + Pdv
2. Tds = du – Pdv
3. Tds = dh + vdP
4. Tds = dh – vdP
[A] 1 and 3
[B] 1 and 4
[C] 2 and 3
[D] 2 and 4
Q.18) To increase work poten al of heat transfer from high temperature to low temperature:
[A] Lower temperature should be lowered keeping temperature difference same
Q.19) The sale of ice - coolers in a shop in months of March, April, May and June are 200, 400, 500 and 600,
respec vely. What will be the forecasted sale in July using a three-period moving average?
[A] 500
[B] 550
[C] 300
https://exergic.learnyst.com/admin/products#all-questions/59184 5/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
[D] 450
1. Inventory reduc on
2. Increased efficiency
[A] 3
[B] 1, 2 and 3
[C] 1 and 4
Q.21) Composi on of the steel at the end of Jominy distance in Jominy test is
[A] Clearance fit
[B] Transi on fit
[C] Interference fit
[D] None of these
Q.23) The ra o of oxygen to acetylene consumed from gas cylinders is 1.3 in gas welding, the flame obtained will
be
[A] Neutral
[B] Carburizing
[C] Oxidizing
[D] None of these
https://exergic.learnyst.com/admin/products#all-questions/59184 6/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.24) The mechanical efficiency of a gas turbine, as compared to an internal combus on reciproca ng engine is
[A] Lower
[B] Higher
[C] Same
[D] Unpredictable
[A]
[B]
[C]
[D]
Q.27) If
[A] f
[B] 2f
[C] tan f
[D] sin f
Q.28) Evaluate where c is the circle in xy plane with centre at origin and radius 2
units.
[A] - 8π
[B] - 16π
[C] 2π
https://exergic.learnyst.com/admin/products#all-questions/59184 7/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
[D] 4π
Q.29) In a normal distribu on, 31% of the items are under 45 and 8% are over 64. Find the mean of the
distribu on if
P (z =-0.496) = 0.19
P (z = 1.405) = 0.42
Answer: _________________
Q.30) Find the area of the segment cut off from the parabola y² = 2x, by the straight line y = 4x-1.
[A] 14/27 sq. units
[B] 11/32 sq. units
Q.31) A system consis ng of 1 kg of an ideal gas at 5 bar pressure and 0.02m3 volume execute a cyclic process
comprising the following opera ons:
1. Reversible expansion to 0.08 m3 volume and 1.5 bar pressure presuming pressure to be a linear func on of
volume.
Calculate the work done for the reversible expansion process(in kJ).
Answer: _________________
Q.32) A large cooking vessel of inner diameter 20 m is filled with water in some hilly region at an eleva on of 1610
m from sea level where average atmospheric pressure is 81.54 kPa. This boiled water is to be served in coldest
places of area for large popula on. If mass of large cooking vessel’s lid is 65 kg, what will be the boiling
temperatures if in first case lid is mechanically supported by supports and in second case no supports are there,
respec vely. Volume of water is constant in both the cases.
https://exergic.learnyst.com/admin/products#all-questions/59184 8/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.33) An aluminum fin (k = 200 W/m - °C) which is 3.0 mm thick and 7.5 cm long protrude from a wall. The base is
maintained at 300°C, and the ambient temperature is 50°C with h = 10 W/m2 - °C. If width of fin is very long with
respect to thickness, calculate the heat loss (in W) from the fin per unit width of the material?
Answer: _________________
Q.34) Cold water (cp = 4.18 kJ/kg.K) enters a counter flow heat exchange at 10°C at a rate of 0.31 kg/s, where it is
heated by hot exhaust air (cp = 1.0 kJ/kg.K) that enters the heat exchanger at 50 °C at a rate of 1.4 kg/s and leaves
at 25 °C. The effec veness of this heat exchange is ________ .
Answer: _________________
Q.35) Water at 20 °C (ρ = 998 kg/m3) and (μ = 1.002 × 10-3 kg/ms) is flowing with a velocity of 0.5 m/s between
two parallel flat plate placed 1 cm apart as shown in figure. The distance from entrance at which the velocity
boundary layers meet is _____ m .
https://exergic.learnyst.com/admin/products#all-questions/59184 9/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Answer: _________________
Q.36) A cube of side 10 cm and weight 5 N is immersed in a liquid of density 800 kg/m3 contained in a rectangular
tank of cross-sec on area of 15 cm × 15 cm. If the tank containing the liquid to the height of 8 cm before the
immersion of cube, then the level of water a er immersion of cube is
[A] 11.12 cm
[B] 10.83 cm
[C] 12.93 cm
[D] None of these
Q.37) At a sudden enlargement of a water pipeline from a diameter of 0.24 m to a 0.48 m, the hydraulic gradient
line rises by 10 mm. Find the discharge in Litres/sec.
Answer: _________________
Q.38) Air inducted from atmosphere through a circular duct by the applica on of suc on at the other end. A glass
tube with its lower end immersed into a vessel containing water is a ached to the cylindrical part of the duct (see
figure). If the liquid level in the glass rises by 25 mm above the free surface and the density of air equals 1.2
kg/m3, the velocity of air in the cylindrical por on is _______ m/s.
Answer: _________________
Q.39) A machine is coupled to a 2-stroke engine which produces a torque of (1000 + 200.sin2θ) N-m, where θ is
the crank angle. The mean engine speed is 400 rpm. The power of the engine (in kW) will be
[A] 56
https://exergic.learnyst.com/admin/products#all-questions/59184 10/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
[B] 42
[C] 21
[D] 33
Q.40) A system of rack pinion – spring is shown in figure, the governing differen al equa on of the system,
considering the pinion to be a thin circular disc, is
[A]
[B]
[C]
[D]
Q.41) A mass m is fixed on ver cal spring a ached at the end of can lever beam (length l and flexural rigidity EI)
of negligible mass. The natural frequency of the system is
[A]
[B]
[C]
Q.42) A block of mass m is released at rest from the top of a rough circular path of radius r as shown in figure such
that it hits the spring. There is a spring of s ffness k at the other end of the path. The maximum spring deflec on
is:
https://exergic.learnyst.com/admin/products#all-questions/59184 11/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
[A] Independent of r
[B]
[C]
[D]
Q.43) A uniform slender rod of length L and cross-sec onal area A is rota ng in a horizontal plane about a ver cal
axis through one end. If the unit mass of the rod is ρ, and it is rota ng at a constant angular velocity of ω rad/sec,
the total elonga on of the rod is
[A] ρω2L3/3E
[B] ρω2L3/6E
[C] 2ρω2L3/3E
[D] 4ρω2L3/3E
Q.44) An overhanging beam ABC supports a concentrated load P at the end of the overhang. Span AB has length L
and overhang has length a. Expression of deflec on δc is:
[A]
[B]
[C]
https://exergic.learnyst.com/admin/products#all-questions/59184 12/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
[D]
Q.45) The stresses at a point in a body are, and yield point stress =
280 MN/m2. What will be the factor of safety according to maximum shear stress theory and distor on energy
theory, respec vely?
[A] 2.5 and 2.15
[B] 3.07 and 1.63
[C] 1.54 and 1.67
Q.46) A load is applied gradually on a steel rod ABC, taking E = 200 GPa. If the yield strength of the material is σy=
320 MPa, find the maximum energy (in Joule) that can be absorbed by the rod without undergoing permanent
deforma on.
Answer: _________________
Q.47) The band brake shown in figure has a coefficient of fric on of 0.25, 350 mm diameter drum, a band width
of 100 mm and an angle of wrap of 270°. If the maximum band interface pressure on the brake is 620 kPa, the
braking torque is
https://exergic.learnyst.com/admin/products#all-questions/59184 13/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.48) A bri le component is subjected to dynamic stress varying between 150 MPa and 250 MPa. The ul mate
tensile strength of the material is 450 MPa.Yield point in tension is 350 MPa. And endurance limit for reversed
bending is 250 MPa. Determine the factor of safety for the design of component according to modified Goodman
criteria.
[A] 1.29
[B] 1.40
[C] 1.55
[D] 2.00
Q.49) Atmospheric air is at a pressure of 100 KPa having a degree of satura on 0.7. The satura on pressure for
water vapour at 30° is 4.25 kPa. The par al pressure of dry air in the atmospheric air, will be
[A] 70.00 kPa
Q.50) A Brayton cycle operates with air entering the compressor at 100 kPa, 20°C, at a rate of 32 m3/s and air
entering the turbine at 800 kPa, 1000°C. The power output of turbine is
[A] 0.25 MW
https://exergic.learnyst.com/admin/products#all-questions/59184 14/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
[B] 2.60 MW
[C] 21.80 MW
[D] 110.80 MW
Q.51) A straight teeth slab milling cu er of 100 mm diameter and 10 teeth rota ng at 200 rpm is used to remove
a layer of 3 mm thickness from a steel box. If the table feed is 400 mm/min, the feed for tooth in this opera on
will be
[A] 0.2 mm
[B] 0.4 mm
[C] 0.5 mm
[D] 0.6 mm
Q.52) In a permeability test for sand cas ng, a sand specimen having height 5.08 cm and diameter 5.08 cm is
used. If 2000 cm3 of air is allowed to pass through the specimen for a period of 120 second under a pressure of 7
g/cm2, the permeability number will be _________ .
Answer: _________________
Q.53) Orthogonal turning is performed on a cylindrical workpiece. These are the details that we know about the
process:
Cu ng force = 565 N
Thrust force = 381 N
Find the normal average force (in N) on chip
Answer: _________________
Q.54) A die is used to blank and punch a washer out of aluminium alloy sheet stock having the thickness of 3 mm.
The external dimension of the washer is 80mm and internal dimension is 30 mm. If the shear strength of the
material is 300 MPa and clearance is 6% of thickness, the size of punch and die in blanking opera ons are
[A] 29.64 mm, 30.00 mm
https://exergic.learnyst.com/admin/products#all-questions/59184 15/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.55) For the network shown in figure, the variance along the cri cal path is 4 and the expected me dura on for
comple ng the ac vi es are shown along the arrows. What is the probability of comple ng the project in 24
days?
[A] 85.4%
[B] 97.7%
[C] 74.3%
[D] 58.2%
General Aptitude
Q.1) Which of the following words is most nearly the same or opposite in meaning to the given for word: JADED?
[A] Animated
[B] Jolt
[C] Evolve
[D] Jargon
Q.2) Statement:
Concerns have risen about air pollu on in Indian ci es. A recent report by WHO states that of the 20 most
populated ci es in the world, 13 are in India. Ac on:
(i) Pollu on commi ee should immediately take certain measures to control the pollu on levels in India.
(ii) Licenses of pollu ng industries should be cancelled and owner should be put behind bars.
Which or the given ac ons follow the given statement?
https://exergic.learnyst.com/admin/products#all-questions/59184 16/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.3) Sanjay writes le ers to his six friends and addresses the corresponding. The number of ways in which none
of the le er goes in a right envelope are?
[A] 720
[B] 265
[C] 1
[D] 720
Q.4) A car travels from A to B at V1 km/hr, and back from B to A at V2 km/hr and again goes back from A to B at
V2 km/hr. The average speed of the car is
[A]
[B]
[C]
[D]
Q.5) The me required to solve a ques on paper is directly propor onal to the number of ques ons and the
difficulty of the ques ons and inversely propor onal to student’s IQ. P requires 80 minutes to solve 40 easy
ques ons and Q requires 120 minutes to solve 15 difficult ques ons. If P is twice as intelligent as Q, how many
easy ques ons will Q solve in the me P solves 30 easy and 20 difficult ques ons?
[A] 40
[B] 35
[C] 30
[D] 32
https://exergic.learnyst.com/admin/products#all-questions/59184 17/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.6) Select the best of the given op ons to make the passage complete and coherent:
_______________ Republicans are lost in theory, unburdened by empirical evidence. Democrats don’t seem to
have much of a theory at all. And as republicans dust themselves off and turn to rewri ng America’s tax code,
democrats could use a working theory of economic growth, judging from last year’s campaign, they aren’t ready
to commit to one. Should they develop an interest, however, there are several to hand.
[A] Lose the bit about iden ty poli cs and you have a clear summa on of American microeconomics.
[B] Republicans focus on capital.
[C] Every American who cares about economic growth should vote for Democrats.
[D] Most of the economic growth in that plan, the founda on found, came from making it cheaper to buy more
capital.
Q.7) Tradi onally, public school instructors have been compensated according to seniority. Recently educa onal
expert have cri cized the system as one that rewards lackadaisical teaching and reduces mo va on to excel.
Instead, these experts argue that, to retain excep onal teachers and maintain quality instruc on, teachers should
receive salaries or bonuses based on performance rather than seniority.
Which of the following, if true, weakens the argument of the educa onal experts?
[A] Some teachers express that financial compensa on is not the only factor contribu ng to job sa sfac on &
teaching performance.
[B] On school districts that have implemented pay for performance compensa on structures, standardized test
scenes have drama cally increased.
[C] Upon leaving the teaching profession many young and effec ve teachers cite a lack of opportunity for more
rapid financial advancement or a primary factor in the decision to change careers.
[D] A merit based system that bases compensa on on teacher performance reduces collabora on, which is an
integral part of quality instruc on.
Q.8) In the logical table given below, which le er replaces the vacant space?
3 P 8
9 G 11
2 U 4
3 W 1
7 _ 18
[A] P
[B] X
[C] B
https://exergic.learnyst.com/admin/products#all-questions/59184 18/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
[D] D
Q.9) In the following geometrical figure, find the value of x (in cm) in the given figure.
Answer: _________________
Q.10) Product P is produced by mixing chemical X and chemical Y in the ra o 5:4. X is prepared by mixing 2 raw
materials A & B in the ra o 1:3. Y isprepared by mixing B & C in the ra o 2:1. Final mixture is prepared by mixing
864 units of P with water. If concentra on of B in final mixture is 50% how much water is added to P?
[A] 264
[B] 402
[C] 368
[D] Can’t be determined
Technical + Mathematics
Q.1)C Q.2)3.78 to 3.80 Q.3)A Q.4)D Q.5)A Q.6)-15 Q.7)730 to 732 Q.8)C Q.9)B Q.10)A
Q.11)99.5 to 100 Q.12)A Q.13)350 Q.14)B Q.15)C Q.16)325.5 to 326 Q.17)B Q.18)D Q.19)A
Q.20)A Q.21)B Q.22)B Q.23)C Q.24)B Q.25)A Q.26)A Q.27)C Q.28)A Q.29)49.5 to 50.5
Q.30)B Q.31)19 to 20 Q.32)B Q.33)358.5 to 360.5 Q.34)0.67 to 0.68 Q.35)0.49 to 0.52 Q.36)B
Q.37)32.5 to 33 Q.38)20 to 20.4 Q.39)B Q.40)B Q.41)A Q.42)D Q.43)A Q.44)B Q.45)C Q.46)63.5
to 64.5 Q.47)C Q.48)B Q.49)D Q.50)C Q.51)A Q.52)35.5 to 36 Q.53)601 to 605 Q.54)C Q.55)B
https://exergic.learnyst.com/admin/products#all-questions/59184 19/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
General Aptitude
Q.1)A Q.2)A Q.3)B Q.4)C Q.5)B Q.6)A Q.7)D Q.8)C Q.9)2 to 2.5 Q.10)C
Technical + Mathematics
Q.1) Explanation:
The given circle |z + 1| = 1 with centre at z = -1 and radius unity does not enclose any singularity of the func on
Q.2) Explanation:
https://exergic.learnyst.com/admin/products#all-questions/59184 20/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
F(x) = 2x – log10 x – 7
F(4) = 8 – log10 4 – 7 = 1 – 0.060206 = 0.39794
Q.3) Explanation:
The urn contains 2 red balls, 3 blue balls and 4 black balls.
Three balls will be of different colours if one ball is red, one blue and one black ball are drawn.
Required probability
Q.4) Explanation:
∴Normal (1, 1, 1) = 2i + 2j + 2k
https://exergic.learnyst.com/admin/products#all-questions/59184 21/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.5) Explanation:
Q.6) Explanation:
Q.7) Explanation:
where, V = qL/2, A = bh
Given that, q = 22.5 kN/m, L = 1.95 m, b = 150 mm, h = 300 mm
Pu ng values,
τmax = 731.25 kPa
https://exergic.learnyst.com/admin/products#all-questions/59184 22/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.8) Explanation:
Q.9) Explanation:
If you observe the formula for ‘h’ in wa s governor, you will realize that varia on in h are negligible for high
speeds.
Q.10) Explanation:
Q.11) Explanation:
https://exergic.learnyst.com/admin/products#all-questions/59184 23/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
v = 27.7128 m/s
= 99.77 km/hr
Q.12) Explanation:
Upon solving,
we get a = 4
Q.13) Explanation:
τ = 350 N/m2
Q.14) Explanation:
Number of bolts, n = 4
https://exergic.learnyst.com/admin/products#all-questions/59184 24/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
= 3.75 kN
Q.15) Explanation:
Due to the tapered shape of rollers, it can take load along both direc ons, radial and axial.
Q.16) Explanation:
Or
P2 = 325.71 kPa
Q.17) Explanation:
From equa ons (i) and (ii), we can conclude that op ons (1) and (4) are correct.
https://exergic.learnyst.com/admin/products#all-questions/59184 25/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.18) Explanation:
Irreversibility will be lesser with decreased temperature difference, so temperature difference in heat transfer
should be kept as less as possible.
Some of the students may think that more temperature difference should be there for genera ng more work. But
ques on is not asking about work, it is asking about work poten al.
Q.19) Explanation:
Q.20) Explanation:
Q.21) Explanation:
The Jominy distance is measured from the quenched end up to the point where 50% Martensite and 50% Pearlite
form.
Q.22) Explanation:
https://exergic.learnyst.com/admin/products#all-questions/59184 26/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
In this case, smallest sha can enter into smallest hole, but largest sha cannot enter into smallest hole, so it is a
transi on fit.
Q.23) Explanation:
∴ Flame is oxidizing
Q.24) Explanation:
Since moving parts are less in gas turbines as compared to IC engine, therefore mechanical efficiency of gas
turbine is higher.
Q.25) Explanation:
Q.26) Explanation:
∴ C.F. = C1ex + (C2x + C3)e-x, Where C1, C2 and C3 are arbitary constants
and
https://exergic.learnyst.com/admin/products#all-questions/59184 27/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Or
Q.27) Explanation:
We have
or
or
Q.28) Explanation:
By Green’s theorem,
https://exergic.learnyst.com/admin/products#all-questions/59184 28/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Here, P = 3x + 4y, Q = 2x – 3y
∴Given integral
Q.29) Explanation:
__________(1)
__________(2)
Q.30) Explanation:
https://exergic.learnyst.com/admin/products#all-questions/59184 29/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
y2 = 2x --------- (i)
y = 4x – 1 ------- (ii)
Q.31) Explanation:
From the data given, the cycle can be made like this:
https://exergic.learnyst.com/admin/products#all-questions/59184 30/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
= 19.5 kJ
So, 19.5 kJ of work is done by the system.
Alternate Method:
Work done can be calculated easily if pressure is varying linearly with respect to volume or displacement.
In this case work done
= ½ ×( sum of ini al and final pressure)×(difference of final volume and ini al volume)
=1/2×(5+1.5)×(0.08- 0.02)
https://exergic.learnyst.com/admin/products#all-questions/59184 31/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
= 19.5 kJ
Q.32) Explanation:
Case I:
When the lid is mechanically supported, water starts boiling when vapour pressure will reach atmospheric
pressure at the eleva on.
Patm = 81.54 kPa
Satura on temperature at that pressure
Tsat = 94°C
Case II:
When lid is supported by water,
So Pboiling = Patm + Plid
= 101.837 kPa
Q.33) Explanation:
We may use the approximate method of solu on where we will convert this p to insulated p by extending the
fin by a fic ous length L’ and then compu ng the heat transfer from a fin with insulated p as given by equa on.
For 1 m width,
equa ng, area of p in this case = transverse area of insulated p
Now we will ignore heat transfer from small thickness. This approxima on is valid as width is assumed to be
infinite with respect to thickness.
So,
area of p in this case = transverse area of insulated p
t x 1 = 2 x (L’ x 1)
L’ = t/2
Effec ve length, Le = L + L’ = L + t/2 = 7.5 + 0.15 = 7.65 cm
https://exergic.learnyst.com/admin/products#all-questions/59184 32/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
So,
Q.34) Explanation:
= 0.6752
Q.35) Explanation:
https://exergic.learnyst.com/admin/products#all-questions/59184 33/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Let x be the distance from entrance where both velocity boundary layer thickness meet.
Boundary layer thickness is given by
Or
Or
x = 0.516 m
Q.36) Explanation:
Volume of A = Volume of B,
15 × 15 × 8 = 15 x 15 x (8 – x) + (15 x 15 – 10 x 10).(x + y)
100 x = 125 y
https://exergic.learnyst.com/admin/products#all-questions/59184 34/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
x = 1.25y _________(i)
Weight of cube = Buoyant force,
x + y = 6.371_________(ii)
From equa on (i) and (ii), we get
y = 2.83 cm and x = 3.54 cm
Level of water a er immersion
= 8 + y = 8 + 2.83
= 10.83 cm
Q.37) Explanation:
https://exergic.learnyst.com/admin/products#all-questions/59184 35/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
A1V1 = A2V2
(0.24)2 V1 = (0.48)2V2
V1 = 4V2
V2 = 0.18 m/s
Discharge,
= 0.0327 m3/sec
= 32.7 Liters/sec
Q.38) Explanation:
Pressure at point 2,
https://exergic.learnyst.com/admin/products#all-questions/59184 36/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
P1 – P2 = 25 g
Q.39) Explanation:
The expression for torque being a func on of 2θ, the cycle is repeated every 180° of the crank rota on.
= 1000 Nm
P = T.ω = 1000 × 41.89 = 41.89 = 42 kW
Q.40) Explanation:
A diagram of rack – pinion – spring when rack is displaced by x from the equilibrium posi on is shown in the
figure. Since x = rθ, the kine c energy of the system is
https://exergic.learnyst.com/admin/products#all-questions/59184 37/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Poten al energy,
Q.41) Explanation:
Natural frequency,
Q.42) Explanation:
or,
Q.43) Explanation:
where,
dP = centrifugal force of differen al mass
= dMω2x = (ρA dx) ω2x
= ρAω2xdx
https://exergic.learnyst.com/admin/products#all-questions/59184 39/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
δ = ρ ω2L3/3E
Q.44) Explanation:
MCB= - Px
Q.45) Explanation:
https://exergic.learnyst.com/admin/products#all-questions/59184 40/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.46) Explanation:
P = 64.3 kN
Maximum energy that can be stored in the rod,
= 63.97 J
Q.47) Explanation:
https://exergic.learnyst.com/admin/products#all-questions/59184 41/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
And
T1 = 10.85 kN
Or
T2 = 3.34 kN
Breaking torque,
Mt = 1.314 kNm
Q.48) Explanation:
https://exergic.learnyst.com/admin/products#all-questions/59184 42/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
FOS = 1.4
Q.49) Explanation:
Specific humidity,
And
Subs tu ng, PV = P - Pa
Pa = 96.98 kPa
Q.50) Explanation:
= 38.05 kg/s
Power output of turbine,
= mcp(T3 – T4)
= 38.05 × 1.005 × (1273 – 702.7)
= 21808.4 kW = 21.8 MW
Q.51) Explanation:
Given
D = 100 mm
Z = 10 teeth
N = 200 rpm
Q.52) Explanation:
= 35.80
Q.53) Explanation:
https://exergic.learnyst.com/admin/products#all-questions/59184 44/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
⇒Ф = 27.844
From merchant analysis,
2Ф + β – α = 90°
(2 × 27.844) + (β - α) = 90°
⇒(β - α) = 34.372
Q.54) Explanation:
For blanking,
Diameter of blank, Db = 80 mm
Diameter of punch in blanking opera on
= Db – (2 × C) = 80 – (2 × 0.18)
= 79.64 mm
https://exergic.learnyst.com/admin/products#all-questions/59184 45/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.55) Explanation:
The various path and their respec ve dura ons are given below in table:
Paths Dura on(days)
1–2–4–6 6 + 3 + 10 = 19
1 – 2– 3 – 4 – 6 6 + 4 + 10 = 20
1–2 -3–5–6 6 + 4 + 6 + 3 = 19
1–3–4–6 8 + 10 = 18
1–3–5–6 8 + 6 + 3 = 17
Path 1 – 2 – 3 – 4 – 6 has the longest me involving 20 days. So, cri cal path.
Given variance = 4
General Aptitude
Q.1) Explanation:
Jaded means red. Animated suggests lively. Hence, almost opposite in meaning.
Q.2) Explanation:
Q.3) Explanation:
n = 6,
https://exergic.learnyst.com/admin/products#all-questions/59184 46/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.4) Explanation:
Q.5) Explanation:
Assume
T = me, k = constant, n = number of ques ons, xp = P’S IQ
d = difficult, xq = Q’S IQ, e = easy, x = IQ
Given,
Solving, n = 35
Q.6) Explanation:
https://exergic.learnyst.com/admin/products#all-questions/59184 47/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
The first op on is most suitable since it introduces the debate in the passage others elaborate the debate and
may follow on.
Q.7) Explanation:
Op on A is irrelevant as the agreement does not claim financial compensa on as the only mo va on.
Op on B perfect strengthener the argument by shoving the posi ve results or this ac on.
Op on C also strengthener of the argument.
Op on D weakens the argument as it shows that this ac on will cause something that is important (collabora on)
to reduce and affect quality educa onnega vely.
Q.8) Explanation:
In each row the reverse alphabe cal value or the central le er equals sum of le and right digits.25 is the reverse
alphabe cal name or B.
Q.9) Explanation:
PT2 = PA PB
62 = 5 (5 + x)
=x
x= = 2.2 cm
https://exergic.learnyst.com/admin/products#all-questions/59184 48/49
2/18/2019 ALL INDIA MOCK GATE-complete-test
Q.10) Explanation:
Propor on of B in P from
x = 368 units.
https://exergic.learnyst.com/admin/products#all-questions/59184 49/49