Académique Documents
Professionnel Documents
Culture Documents
______
(EG-10)
GUJARAT TECHNOLOGICAL UNIVERSITY
B.E. all Sem-I Examination December 08/January 09
Instructions:
(a)
Q.5 (a) A square pyramid made up of Aluminium sheet with side of base 50 mm 07
and axis length 60 mm is kept on HP on a corner of its base with its axis
inclined to HP at an angle of 45 o and parallel to VP. It is cut by a plane
perpendicular to both HP and VP and passing through the corner on HP.
Develop the surface of the pyramid with portion containing apex.
(b) Draw Elevation and Left Hand Side View of Figure 1 according to First 07
Angle projection method.
OR
Q.5 (a) A cone made up of Aluminium sheet with base circle diameter 70 mm and 07
axis length 75 mm is kept on its base on the ground. A circular hole of 30
mm diameter is cut through the cone such that its axis remains
perpendicular to VP, 10 mm to the right of axis of cone and 25 mm above
the base of cone. Develop the surface of cone.
(b) Draw Elevation and Plan of Figure 1 according to Third Angle projection method. 07
Figure 1
_____________________________