Vous êtes sur la page 1sur 1

PROJECT

DESCRIPTION
CLIENT: PEDEC (NIOC)
PROJECT: Kuh-e-Mond Field, Iran

DESCRIPTION 4. To process the 3D seismic data so that


The Kuh-e-Mond field study is a joint venture maximum useful information can be
project between Teknica and Naftkav to evaluate recovered.
the field’s heavy oil reserves. The Kuh-e-Mond 5. To interpret the 3D seismic data including
structure is a large NW-SE trending anticline seismic inversion, provided the data quality
about 90 km long and 16 km wide located about allows.
70 km SE of Bushehr on the Persian Gulf coast. 6. To prepare reservoir property maps and
The field was discovered in 1931 but systematic sections/profiles based on the above noted
Recently exploration of the field was only started in 1984. 3D seismic interpretation.
The first five wells had targeted deeper horizons, 7. To select two appraisal wells based on the
but well MD-6 was the first exploration well drilled above analysis including geological forecast,
and completed at a depth of 1450m, specifically detailed drilling, testing and completion
for the heavy oil zones. Well MD-6 confirmed the programs.
Completed occurrence of heavy oil in two separate 8. To supervise the drilling, testing and
carbonate reservoirs in the Jahrum (Eocene) and completion of these two wells.
Sarvak (Cretaceous) formations. The thickness 9. To analyze the data obtained from the two
of the Jahrum reservoir is about 400 m and it appraisal wells including results of any core
contains oil of 6° to 8° API, while the Sarvak has analysis, fluid analysis, pressure tests,
or a thickness of about 300 m and oil of 12°-14°
API. These two carbonate reservoirs are highly 10.
image logging, etc.
To develop an accurate geologic model for
fractured. Delineation well MD-7, drilled in 1985, the Kuh-e-Mond heavy oil reservoirs to be
appears to be outside of the oil bearing zone and used in the simulation study.
established an apparent oil-water contact. 11. To update the reservoir characterization from
Preliminary estimates indicate that about 5.7 steps 5 and 6 above by incorporating new
Ongoing billion barrels of heavy and extra heavy oil are in- data.
place in these two reservoirs. 12. To estimate the original oil-in-place, its
distribution in the various reservoirs and the
OBJECTIVES different porosity systems and to define the
There are two main objectives in this reservoir aquifer, including OWC and aquifer size.
Projects study: first to develop an accurate reservoir 13. To develop a reservoir simulation model that
description using existing and new seismic and adequately represents the reservoir
well data along with new geological and characterization.
petrophysical interpretation and second, to 14. To run sensitivity studies and single well,
review the feasibility of recovering the heavy oil sector and pattern simulations to determine
by analyzing the reservoir performance under the technical parameters affecting recovery.
various recovery processes using the reservoir 15. To determine production equipment
description developed. Reservoir simulation requirements and conceptual surface facility
studies will then be undertaken to evaluate design for the three processes noted above.
alternative development schemes so that an This would include cost estimates to
optimum development plan and operating implement these three scenarios and a
strategy can be defined. detailed economic analysis to determine the
optimum development scenario.
METHODOLOGY/SCOPE OF WORK 16. To investigate the feasibility of different
1. To collect, review and classify all available transportation and upgrading methods and a
data. preliminary estimate of their cost.
2. To process and reinterpret available 2D 17. To prepare a pilot project design using the
Suite 2200 605 - 5th Avenue S.W. seismic data including seismic inversion if optimum recovery scheme and development
Calgary, Alberta, Canada
the 2D data quality permits. scenario defined above.
T2P 3H5
Tel: 403-269-4386 3. To design and supervise the implementation
Fax: 403-266-4395 of a 3D seismic program to enhance
Email: teknica@teknicaltd.com seismic interpretation.
Website: www.teknicaltd.com

Vous aimerez peut-être aussi