Académique Documents
Professionnel Documents
Culture Documents
28
WATER SUPPLY
Notes:-
(i) (For labour rate items only) The rates for stringingout cast iron,A.C., P.V.C. and H.D.P.E. pipes and
their specials etc. provided under this chapter which are in the wider sense labour rates in case of
which the material is generally issued to the contractors free of cost from the stores of the Engineer-
in-Charge or the nearest railway station, include the carriage of material within a redius of 5km of the
site of works.
(ii) The rates for excavation are applicable for excavation both manually as well as by mechanical
means.
(iii) The rates taken in the CSR are for above 80mm i/d water supply lines where department shall
furnish excise duty certificate to the contractor. In case of works other than water supply, where
these pipes are used and department does not furnish any excise duty exemption certificate,
applicable excise duty will be paid extra.
Sr. Description. Unit Plains Sub-mountainous
No. Labour Through region
Labour Through
Rate Rate Rate Rate
1 2 3 4 5 6 7
28.1 Excavation for pipe lines in trenches and
pits including trimming and dressing
sides levelling of beds of trenches to
correct grade, cutting joint holes, refilling
consolidation and watering of refill in
15cm layers and restoration of
unmettaled or unpaved surface to its
original condition including the cost of
necessary shoring, timbering,
dewatering of rain water, diversion for
traffic, night signals, providing & fixing
caution boards, crossing over trenches
for access to the houses, watching,
fencing, etc. and removal of surplus
spoll out side/inside the town involving
lead upto one kilometer.
Note In case ISI marked CI pipe class-A as per IS 7181 is used, the through rate will be increased by
(i) 10% in item no 28.9-A
(ii) In case ISI marked CI pipe class-B as per IS 7181 is used, the through rate will be increased by
20% in item no 28.9-A
a 80mm i/d pipe lines laid complete m 264.82 1800.40 291.30 1826.88
c 15mm i/d Ferrule heavy duty each 73.30 359.38 80.63 366.71
d 20mm i/d Ferrule heavy duty each 151.84 552.36 167.02 567.54
e 25mm i/d Ferrule heavy duty each 205.68 1063.93 226.25 1084.50
28.46 Blank
28.47 Blank
28.48 Blank
28.54 Blank
m 18.11 19.92
m 34.97 38.47
m 39.02 42.92