Académique Documents
Professionnel Documents
Culture Documents
Hydraulics
• Flows to 700 GPM (159 m3/hr) • Speeds to 2,400 RPM
• Heads to 120 Ft (36 M) • Temperatures to 250°F (121°C)
• Power to 20 HP (15 KW)
850 Series
Ideally suited for
direct piping!
Discharge Flange
Machined for both 150#
and PN10 connections.
Mounting
Flange mounting directly
to the receiver tank
eliminates suction piping/
NPSH problems and allows
pumping to resume even
after short periods of
interrupted flow.
Impellers
Semi-open impellers are
keyed to the shaft for a
secure fit and maximum
protection should
momentary reverse
rotation occur.
Stuffing Box
With a 2” diameter packed
stuffing box as standard, Bearings
mechanical seals are
Double ball sealed for life
available as an option.
bearings on both the
inboard and outboard
locations insure a long low
maintenance life. (Single
ball sealed for life bearings
used on the 1” x 8” model.)
Swing Out Mount
Allows pump inspection or quick
access to tank.
Shafts
Duplex/17-4ph stainless
steel shafts are utilized to
both strengthen the shaft
and eliminate the need for
shaft sleeves. Half Open – Bolts removed and
unit is being swung open from the
receiving tank.
Bearings
Double ball sealed for life
bearings on both the
inboard and outboard
locations insure a long low Open – Fully open and ready for
maintenance life. (Single inspection/access to tank.
ball sealed for life bearings
used on the 1” x 8” model.)
Hydraulic Coverage
200
180 Unlined
160
140
TOTAL HEAD IN FEET
120
2x 9
21⁄2 x 9
100
11⁄2 x 9 3x 9
80
1x 8 4x 9
60
40
20
0
0 100 200 300 400 500 600 700 800 900 1000
U.S. GALLONS PER MINUTE
200
180 Rubber
Lined
160
140
TOTAL HEAD IN FEET
120
100
11⁄2 x 9 2x 9
3x 9
80
4x 9
60
21⁄2 x 9
40
20
0
0 100 200 300 400 500 600 700 800 900 1000
U.S. GALLONS PER MINUTE