Académique Documents
Professionnel Documents
Culture Documents
PERSONAL INFORMATION
EDUCATION BACKGROUND
SUMMARY OF EXPERIENCE
Having more than 9 (nine) years in Fabrication, Construction, Site Installation & Modification for
Inspection and Quality Assurance / Control including supervision & coordination, inspection, prepare
quality control procedure and responsible for general QA/QC activities to confirm that they comply with
specified procedure or Client requirement. Has served as QA/QC Engineer / Coordinator, Mechanical
Engineer, Welding Engineer, QC / Welding Inspector, and Project Quality Engineer for offshore / onshore
Oil & Gas Project (Topside, Jacket, FSO, Plant and Pipeline)
CV of M. Adilla Adzanys 1 of 8
International Welding Engineer (IWE) by Approved Training Body B4T
within IIW (International Institute of Welding) by ANB Austria, Bandung, Certificate No. IWE
AT 0159
CAREER HISTORY
(From current company to previous company)
CV of M. Adilla Adzanys 2 of 8
• Monitor stringing, fir up and welding activities (prior, during and
after welding) and lowering of 8” bypass line
• Review RT film and monitor PT and UT lamination check for cut
out joint
• Monitor field joint coating application and witness holiday test
• Perform visual observation and monitor UT check for remaining
thickness on leaking pipe section of current pipeline
• Perform pipeline assessment for flowline from well to jumper line
(manifold) such as verify actual remaining WT, external corrosion and
pitting, support, crossing, cathodic protection, and community along ROW
Project Assigned : Valves Inspection for Corridor Mercury Removal & Gelam Compressor
Position : QA / QC Inspector
Duties & • Verify and visual check to material condition and identification
Responsibilities stamp of valves and review mill sheet and other test report
• Monitor and witness leak test for Butterfly valves, Ball valves,
Gate valves, Globe valves and Check valves as per API 598 and API 6D
which consist of low and high closure test, backseat test and shell test
• Witness PMI (Positive Material Identification) performed on
stainless steel valves include Pressure Safety Valves
• Monitor repair carried out on leakage valves and re-test after
repair.
• Monitor and check blasting for surface preparation and painting
applied on carbon steel valves as per project procedure and specification
CV of M. Adilla Adzanys 3 of 8
3. Period : March - April 2009
Company : PT. Java Velosi Mandiri for ConocoPhillips Indonesia Inc. Ltd
Project Assigned : North Belut Project – CPP Jacket Offshore Installation
Position : QA / QC & Welding Inspector
Duties & • Conduct QC surveillance for mainly welding work during
Responsibilities execution of final 8 legs CPP jacket installation for crown, transition piece
and boat landing
• Monitor NDT (UT & MT) after weld completion and hardness test
to verify its mechanical properties due to some circum and long seam weld
position
• Review WPS & specifications, Establish manning level for the work
• Coordinate with field supervisor to perform installation work (welding,
coating, insulation, testing, etc) as per project plan and schedule
6. Project Assigned : Hang Tuah Platform Modification, Offshore - Natuna Sea, Indonesia
3 (June – December 2006)
Client : Conoco Phillips Indonesia Inc. Ltd.
Position : Project & QC Engineer
Duties & & • Review and develop procedures in project deliverable list
Responsibilities • Prepare ITP for fabrication and installation, monitor and control shop
fabrication of piping and structural work
• Review WPS and prepare welder qualification test
6. Project Assigned : KRA South Gas Development Subsea Tie-In, Offshore - Natuna Sea
4 Indonesia (January-December 2006)
Client : Star Energy (Kakap) Ltd.
Position : Project / Construction Engineer & QC Inspector - Topside (Tripatra-
Sarku Consortium)
Duties & &
Responsibilities • Develop procedures in project deliverable list, Review the design of
installation aids and WPS required
6. Project Assigned : West Seno Turnaround Project for FPU and TLP, Offshore - Makassar
5 Strait, Indonesia (July – October 2005)
Owner : Unocal Makassar Ltd.
Client : Hyundai Heavy Industries
Position : Mechanical / QC Engineer & Inspector
Duties & &
Responsibilities • Review WPS, Welder Certificates, drawing and other project
procedures for installation of mechanical equipment (CPI Tank), piping &
structural
CV of M. Adilla Adzanys 6 of 8
• Review the inspection and NDT result
• Liaise with the client and other parties for progress of quality
achievement and ensure corrective/preventive actions are performed as
well
7.2 Project Assigned : Semberah VLP/MP Gas Compressor Additional - Semberah 14 Plant
Muara Badak, East Kalimantan (June-November 2002)
Client : VICO Indonesia
Position : QA / QC & Welding Inspector
Duties & & • Perform inspection and monitor work on piping, structural and
Responsibilities mechanical equipment (VLP and MP Gas Compressor) as per ITP, spec.
and standard
MISCELLANEOUS
• Familiar with Code and Standard ASME Sec. IX, AWS D1.1, API 1104, ANSI B31.3, ANSI B31.4,
ANSI B31.8 etc
• Understanding about Failure Analysis
Note:
Original copy of certification and other supporting documents may be called for and presented if and when
required.
I hereby certify that all statements in this data are true and correct to the best of my knowledge and
belief.
CV of M. Adilla Adzanys 8 of 8