Académique Documents
Professionnel Documents
Culture Documents
In this article, let us see how to create a new datastore using vSphere client.
Launch vSphere Client -> Click on the top node in the left tree -> Configuration tab -> Click on
the storage menu item under “Hardware” section, as shown below. This storage section, will
display all available VMware datastores as shown below.
For example, the current VMware datastore1 on this ESXi server has following information.
Volume Label ( Datastore ): datastore1
device: locall dell disk ( naa.xxxx )
Capacity: 131 G
Free: 2.45 GB
File system: vmfs3
Please note that the VMS file system can be created across multiple partitions to form
one logical VMFS volume.
2. Create VMFS Datastore – Select ESX Storage Type
Click on ‘Add Storage..’ link on the top right hand corner, which will display the “Add
Storage” wizard.
The first step is to specicy the esx storage type for the new ESX VMFS datastore. Select
Disk/LUN as shown below. (other option is to select network file system – nfs datastore)
3. Select Disk/LUN
This step will display all the available disk groups on the server. This is a dell poweredge 2950
server, which already has a raid-1 logical disk group created at the hardware raid level. The raid-
1 diskgroup that was created at the hardware level is now visible to the ESXi server. If you have
more than one diskgroup available to the hardware, they’ll be listed here.
4. Current Disk Layout Configuration
This is only a information screen that says that the hard disk is blank etc.,. Click on Next to
continue
Fig:
VMware VMFS Disk Layout Configuration
6. Disk/LUN Formatting
Specify the maximum file size for this esx datastore. In this example, I selected 256GB as
maximum file size with 1MB block size. Following options are available for the maximum file
size:
Fig: VMware
Datastore creation confirmation
8. New ESX datastore Created
The new datastore3 is created as shown below.
Fig: New VMware ESXi Datastore created
In our next article, let us review how to use/attach an existing datastore to a virtual
machine.