Académique Documents
Professionnel Documents
Culture Documents
Below you may find how to define EUL channel for one site in RNC.
As an example to define eul channel for the second carier of the second sector of the site named
BOLBA, below commands could be run in RNC. To be able to define this channel, related
UtranCell and Hsdsch channel must be defined previously.
---------------------------------------------------------------------------------------------------------------------
confb+
gs+
cr RncFunction=1,UtranCell=BOLBA22,Hsdsch=1,Eul=1
lset RncFunction=1,UtranCell=BOLBA22,Hsdsch=1,Eul=1$ administrativeState 1
lset RncFunction=1,UtranCell=BOLBA22,Hsdsch=1,Eul=1$ eulMaxTargetRtwp -499
lset RncFunction=1,UtranCell=BOLBA22,Hsdsch=1,Eul=1$ numEagchCodes 2
lset RncFunction=1,UtranCell=BOLBA22,Hsdsch=1,Eul=1$ numEhichErgchCodes 2
lset RncFunction=1,UtranCell=BOLBA22,Hsdsch=1,Eul=1$ userLabel EUL_BOLBA22
confb-
gs-
---------------------------------------------------------------------------------------------------------------------
In order to define more than one eul channel at once, you may use below script...
---------------------------------------------------------------------------------------------------------------------
confb+
gs+
lt all
func cr_eul
$table = readfile(/home/ericame/eul_addition.txt)
for $lineNumber = 1 to $nr_of_lines
$word = split($table[$lineNumber])
$1 = $word[1]
cr RncFunction=1,UtranCell=$1,Hsdsch=1,Eul=1
lset RncFunction=1,UtranCell=$1,Hsdsch=1,Eul=1$ administrativeState 0
lset RncFunction=1,UtranCell=$1,Hsdsch=1,Eul=1$ eulMaxTargetRtwp -499
lset RncFunction=1,UtranCell=$1,Hsdsch=1,Eul=1$ numEagchCodes 1
lset RncFunction=1,UtranCell=$1,Hsdsch=1,Eul=1$ numEhichErgchCodes 2
lset RncFunction=1,UtranCell=$1,Hsdsch=1,Eul=1$ userLabel EUL_$1
unset $word
unset $table[$lineNumber]
done
endfunc
cr_eul
confb-
gs-
Prepare a text file in which the sites and sectors that you want to define eul channel are listed.
Give a name to that file. In this case the name of the file is “eul_addition.txt”.
ERBAB12
ERBAB22
ERBAB32
ESFEM12
ESFEM22
ESFEM32
BOLBA12
BOLBA22
BOLBA32
Do not forget to modify the script according to your reference file and path. It is shown in red
above.
And finally run your script in the RNC with run command as below. ( here our script is named
“add_eul.mos”)
“run add_eul.mos”
You may check with “lst <sitename>” command if the eul channel is defined or not.
If Eul channel is not enabled, IubEdch must be checked whether it is defined or not.
cr RncFunction=1,IubLink=Iub_BOLBA,IubEdch=1
lset RncFunction=1,IubLink=Iub_BOLBA,IubEdch=1$ edchDataFrameDelayThreshold 60
lset RncFunction=1,IubLink=Iub_BOLBA,IubEdch=1$ userLabel
confb-
gs-
---------------------------------------------------------------------------------------------------------------------
If it is still not enabled, you should follow the troubleshooting procedure for Eul.( license,
numEulResources...)
add_eul.mos.txt eul_addition.txt