Académique Documents
Professionnel Documents
Culture Documents
Steel Products
universal tower stand-off quik-teeTM tower pipe panel antenna heavy duty dish stand-off
sector frames sector frames sector frames frame stand-off brackets stand-off brackets bracket
page 2 page 3 page 5 page 7 page 9 page 9 page 10
tower applications
pipe-to-pipe adjustable stand-off universal adjustable universal tapered pipe universal universal cable
adapters pipe mounts pipe mount tapered pipe mount mount slider brackets saddle mount ladder kits
page 11 page 12 page 14 page 14 page 15 page 15 page 19
stackable pod mini water tower water tower two-post waveguide four-post waveguide triple tee
mount assemblies monopole roof-top assemblies leg brackets bridge kits bridge kits trapeze kits
page 61 page 62 page 63 page 66 page 68 page 68 page 75
equipment platforms for adjustable leg for platform microwave antenna bulk pipe square rail support
raw land installations platforms systems ice shields and angle components hardware
page 91 page 91 page 92 page 93 page 94 page 95 page 98
16409_AndrewIntPgR3.qxp 9/21/06 9:00 AM Page 1
table of contents
catalog overview
tower applications ................................................................................................................................1
co-location kits .................................................................................................................................2
mounting components........................................................................................................................7
coaxial cable support components ....................................................................................................19
accessories .........................................................................................................................................89
snap-in hangers..............................................................................................................................89
adapters .......................................................................................................................................89
notes.................................................................................................................................................101
Andrew customers can significantly reduce their number • Advanced steel fabrication
of suppliers, realize supply chain economies, and optimize • Certified welding operations
their infrastructures. Andrew‘s global manufacturing and • Precision sheet metal fabrication
distribution systems provide our customers with considerable • Value-added assembly
efficiencies and economies. • Site kitting capabilities
To further serve you as the world‘s leading one-stop, end-to- Andrew‘s global network of distribution partners provides
end supplier of RF subsystems solutions, Andrew is pleased superior, localized material supply to substantially reduce
to announce the addition of MTS Wireless Components to your shipping costs, as well as reduce or eliminate any tran-
our end–to–end solutions. MTS has a long-established sit delays or shipping damage. The powerful combinations
reputation as an industry leader in antenna mounting and of Andrew‘s unequaled capacity and quality, distribution
site-related components. With it, Andrew has broadened its strength and exceptional customer service, support and mate-
product line and expanded its services to include: rial staging, ensures the successful implementation of your
system.
Andrew Institute
Worldwide, the Andrew Institute provides technicians with
the top-quality, specialized training they need to optimize
communications systems performance and reliability. Our
trainers offer comprehensive, hands-on instruction for the
newest Andrew products, installation methods, and theory.
www.andrew.com
OEMs and Operators around the world depend on
Andrew.com to provide them with the most comprehensive
technical and product information, unique industry solution
overviews, extensive self-service support, and advanced
search capability. Users can download the industry‘s best
planning software, register for Andrew Institute courses,
access real-time orders including shipping status, read
Andrew Access Customer Solutions, and much more.
16409_AndrewIntPgR3.qxp 9/21/06 9:00 AM Page 1
tower applications
towers
grounding (p.79-84)
1 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:00 AM Page 2
tower applications
universal sector frames Ordering Information
towers
Part Number Description Wt. lb Wt. kg Kit Qty.
Application: Lattice towers
Universal Sector Frame 12' 6" (3.8 m) wide
Size: 12' 6" (3.8 m) or 14' 6" (4.4 m) face
SF-U12-B Universal Sector Frame, 12' 6" (3.8 m). 397 180.1 Each
Design: Frame with 24" (0.6 m) stand-off Pipe mounts not included.
Feature: Superior loading with a universal design SF-U12-B-NH Universal Sector Frame, 12' 6" (3.8 m). 349 158.3 Each
Pipe mounts and leg saddle mounts not included.
Mounts to: Straight or tapered legs up to 8" OD,
8" angle 60°, or 6" angle 90° SF-U12-3-72 Universal Sector Frame, 12' 6" (3.8 m). 487 220.9 Each
Three 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)
Material: Hot dip galvanized steel pipe mounts included.
Includes: Frame, clamps, and stiff arm. Pipes and sad- SF-U12-3-96 Universal Sector Frame, 12' 6" (3.8 m). 508 230.4 Each
dle mounts unless noted. Three 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)
pipe mounts included.
Order Separately: Pipes or pipes and saddle mounts on SF-U12-3-126 Universal Sector Frame, 12' 6" (3.8 m). 536 243.1 Each
B/B-NH kits Three 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)
pipe mounts included.
SF-U12-4-72 Universal Sector Frame, 12' 6" (3.8 m). 517 234.5 Each
Four 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)
pipe mounts included.
SF-U12-4-96 Universal Sector Frame, 12' 6" (3.8 m). 546 247.7 Each
Four 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)
pipe mounts included.
SF-U12-4-126 Universal Sector Frame, 12' 6" (3.8 m). 583 264.4 Each
Four 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)
pipe mounts included.
Face Width EPA (no ice, sq ft): EPA (1/2” radial ice, sq ft):
12' 6” Face 10.8 15.1
14' 6” Face 11.7 16.4
Man Rating: 250 lb vertical man load at 15 mph (BWS)
Wind Rating*: 120 mph (BWS) per latest revision of TIA/EIA 222
140 mph 3-second gust, Exposure “D” per FBC, at 150’ AGL
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 2
16409_AndrewIntPgR3.qxp 9/21/06 9:00 AM Page 3
tower applications
tower stand-off sector frames
Ordering Information
towers
Face Width EPA (no ice, sq ft): EPA (1/2” radial ice, sq ft):
7’ 6” Face 15.1 19.5
10’ 6” Face 16.8 21.9
12’ 6” Face 18.2 23.6
14’ 6” Face 19.5 25.4
Man Rating: 250 lb vertical man load at 15 mph (BWS)
Wind Rating*: 120 mph (BWS) per latest revision of TIA/EIA 222
140 mph 3-second gust, Exposure “D” per FBC, at 150’ AGL
3 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:00 AM Page 4
tower applications
tower stand-off sector frames Ordering Information
towers
Part Number Description Wt. lb Wt. kg Kit Qty.
continued
Stand-off Sector Frame 12’ 6" (3.8 m) wide
SF-SU12-B Stand-off Sector Frame, 12' 6" (3.8 m). 368 166.9 Each
Pipe mounts not included.
SF-SU12-B-NH Stand-off Sector Frame, 12' 6" (3.8 m). 321 145.6 Each
Pipe mounts and leg saddle mounts not included.
SF-SU12-2-72 Stand-off Sector Frame, 12' 6" (3.8 m). 414 187.8 Each
Two 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)
pipe mounts included.
SF-SU12-2-96 Stand-off Sector Frame, 12' 6" (3.8 m). 429 194.6 Each
Two 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)
pipe mounts included.
SF-SU12-2-126 Stand-off Sector Frame, 12' 6" (3.8 m). 447 202.8 Each
Two 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)
pipe mounts included.
SF-SU12-3-72 Stand-off Sector Frame, 12' 6" (3.8 m). 438 198.7 Each
Three 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)
pipe mounts included.
SF-SU12-3-96 Stand-off Sector Frame, 12' 6" (3.8 m). 459 208.2 Each
Three 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)
pipe mounts included.
SF-SU12-3-126 Stand-off Sector Frame, 12' 6" (3.8 m). 487 220.9 Each
Three 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)
pipe mounts included.
SF-SU12-4-72 Stand-off Sector Frame, 12' 6" (3.8 m). 461 209.1 Each
Four 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)
pipe mounts included.
SF-SU12-4-96 Stand-off Sector Frame, 12' 6" (3.8 m). 490 222.3 Each
Four 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)
pipe mounts included.
SF-SU12-4-126 Stand-off Sector Frame, 12' 6" (3.8 m). 537 243.6 Each
Four 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)
pipe mounts included.
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 4
16409_AndrewIntPgR3.qxp 9/21/06 9:00 AM Page 5
tower applications
quik-teeTM sector frames Ordering Information
towers
Includes: Frame, clamps and stiff arm. Pipes and saddle QT-SF10-2-126 Quik-TeeTM Sector Frame, 10' 6" (3.1 m). 415.37 188.4 Each
Two 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)
mounts unless noted. Pipe mounts included.
Order Separately: Pipes for Base Kits, second stiff arm for QT-SF10-3-72 Quik-TeeTM Sector Frame, 10' 6" (3.1 m). 398.97 181 Each
increased wind rating. Three 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)
Pipe mounts included.
QT-SF10-3-96 Quik-TeeTM Sector Frame, 10' 6" (3.1 m). 436.47 198 Each
Three 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)
Pipe mounts included.
QT-SF10-3-126 Quik-TeeTM Sector Frame, 10' 6" (3.1 m). 455.07 206.4 Each
Three 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)
Pipe mounts included.
QT-SF10-4-72 Quik-TeeTM Sector Frame, 10' 6" (3.1 m). 419.97 190.5 Each
Four 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)
Pipe mounts included.
QT-SF10-4-96 Quik-TeeTM Sector Frame, 10' 6" (3.1 m). 469.97 213.2 Each
Four 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)
Pipe mounts included.
QT-SF10-4-126 Quik-TeeTM Sector Frame, 10' 6" (3.1 m). 494.77 224.4 Each
Four 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)
Pipe mounts included.
5 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 6
tower applications
Ordering Information
quik-tee TM
sector frames
towers
Part Number Description Wt. lb Wt. kg Kit Qty.
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 6
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 7
tower applications
pipe frame stand-off brackets Ordering Information
towers
Material: Hot dip galvanized steel Pipe Frame Stand-off Bracket for Tapered Legs
Includes: Stand-off and clamps PB-G3T-2 Tapered Pipe Frame Stand-off Bracket, 138 62.6 Each
36" (0.9 m). For 2" to 5" OD
Order Separately: Tower pipe frame components (50.8 mm to 127 mm OD) legs.
PB-G3T-4 Tapered Pipe Frame Stand-off Bracket, 138 62.6 Each
36" (0.9 m). For 4" to 8" OD
(101.6 mm to 203.2 mm OD) legs.
Face Width EPA (no ice, sq ft): EPA (1/2” radial ice, sq ft):
10’ 6” Face 7.27 10.50
12’ 6” Face 8.22 11.80
Man Rating: 250 lb vertical man load at 15 mph (BWS)
Wind Rating*: 120 mph (BWS) per latest revision of TIA/EIA 222
140 mph 3-second gust, Exposure “D” per FBC, at 150’ AGL
7 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 8
tower applications
stand-off brackets Ordering Information
towers
Part Number Description Wt. lb Wt. kg Kit Qty.
Application: Lattice towers S-200 Stand-off Bracket, 24" (0.6 m). 22 9.9 Each
1-7/8" OD x 24" (47.6 mm OD x 0.6 m)
Size: 24" (0.6 m) to 72" (1.8 m) stand-off antenna mounting pipe.
Design: One-piece welded stand-off S-300 Stand-off Bracket, 36" (0.9 m). 28 12.5 Each
Feature: Ideal for omni antennas 1-7/8" OD x 24" (47.6 mm OD x 0.6 m)
antenna mounting pipe.
Mounts to: Straight or tapered legs up to 3-1/2" S-400 Stand-off Bracket, 48" (1.2 m). 41 18.6 Each
(88.9 mm) OD, clamps included 1-7/8" OD x 32" (47.6 mm OD x 0.8 m)
antenna mounting pipe.
Material: Hot dip galvanized steel
S-500 Stand-off Bracket, 60" (1.5 m). 47 21.5 Each
Includes: Stand-off and clamps 1-7/8" OD x 32" (47.6 mm OD x 0.8 m)
Order Separately: Larger clamp sets antenna mounting pipe.
S-600 Stand-off Bracket, 72" (1.8 m). 54 24.5 Each
1-7/8" OD x 32" (47.6 mm OD x 0.8 m)
antenna mounting pipe.
Wind Rating*: 120 mph per latest revision of TIA/EIA 222 at 150’ AGL
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 8
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 9
tower applications
panel antenna Ordering Information
towers
52”
(1.3m)
3/4” OD
(19.1mm)
70”
(1.8m)
9 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 10
tower applications
dish stand-off bracket Ordering Information
towers
Part Number Description Wt. lb Wt. kg Kit Qty.
Application: Lattice towers DM-100 Dish Stand-off Bracket, 24" (0.6 m) 31 14.3 Each
Size: 24" (0.6 m) stand-off
Design: One-piece welded stand-off
Feature: 3" OD (76.2 mm) pipe for dishes
Mounts to: Straight or tapered legs up to 3-1/2" (88.9 mm) OD
Material: Hot dip galvanized steel
Includes: Stand-off and clamps
Order Separately: Larger clamp sets
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 10
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 11
tower applications
welded pipe-to-pipe clamps
Ordering Information
towers
11 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 12
tower applications
adjustable pipe mounts Ordering Information
towers
Part Number Description Wt. lb Wt. kg Kit Qty.
Application: Lattice towers
Adjustable Pipe Mount Kits, 2-3/8" OD
Size: 2-3/8" (60.3 mm) or 4-1/2" (114.3 mm) OD
PM-238-48 Adjustable Pipe Mount, 2-3/8" OD x 48" 14 6.4 Each
Design: Pipe with adjustable mounting bracket (60.3 mm OD x 1.2 m)
Feature: Straight or tapered mounts with adjustable spacing PM-238-72 Adjustable Pipe Mount, 2-3/8" OD x 72" 21 9.5 Each
(60.3 mm OD x 1.8 m)
Mounts to: Saddle mounts
PM-238-84 Adjustable Pipe Mount, 2-3/8" OD x 84" 26 11.8 Each
Material: Hot dip galvanized steel (60.3 mm OD x 2.1 m)
Includes: Pipe, bracket, and hardware PM-238-96 Adjustable Pipe Mount, 2-3/8" OD x 96" 34 15.2 Each
(60.3 mm OD x 2.4 m)
Order Separately: Saddle mount
Adjustable Tapered Pipe Mount Kits, 2-3/8" OD
PM-238T-48 Adjustable Tapered Pipe Mount, 14 6.4 Each
2-3/8" OD x 48" (60.3 mm OD x 1.2 m)
PM-238T-72 Adjustable Tapered Pipe Mount, 21 9.5 Each
2-3/8" OD x 72" (60.3 mm OD x 1.8 m)
PM-238T-84 Adjustable Tapered Pipe Mount, 26 11.8 Each
2-3/8" OD x 84" (60.3 mm OD x 2.1 m)
PM-238T-96 Adjustable Tapered Pipe Mount, 34 15.2 Each
2-3/8" OD x 96" (60.3 mm OD x 2.4 m)
PM-238
Adjustable Pipe Mount Kits, 4-1/2" OD
PM-412-48 Adjustable Pipe Mount, 4-1/2" OD x 48" 44 20.0 Each
(60.3 mm OD x 1.2 m)
PM-412-63 Adjustable Pipe Mount, 4-1/2" OD x 63" 57 25.9 Each
(114.3 mm OD x 1.6 m)
PM-412-96 Adjustable Pipe Mount, 4-1/2" OD x 96" 88 39.9 Each
(60.3 mm OD x 2.4 m)
Wind Rating*: 120 mph per latest revision of TIA/EIA 222 at 150’ AGL
PM-412
*Typical installation of (1) 96” x 8” panel antenna per pipe mount
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 12
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 13
tower applications
pipe mounts Ordering Information
towers
MT-395 MT-397
13 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 14
tower applications
stand-off pipe mount Ordering Information
towers
Part Number Description Wt. lb Wt. kg Kit Qty.
Application: Lattice towers PM-XT-24 Stand-off Pipe Mount, 107.88 48.93 Each
4-1/2" OD x 63" (114.3 mm OD x 1.6 m).
Size: 4-1/2" (114.3 mm) OD 24" (0.6 m) stand-off.
Design: 4-1/2" OD pipe mount with stand-off PM-XT-36 Stand-off Pipe Mount, 128.45 58.26 Each
4-1/2" OD x 63" (114.3 mm OD x 1.6 m).
Feature: 24" (0.6 m) or 36" (0.9 m) stand-off 36" (0.9 m) stand-off.
Mounts to: Saddle mounts
Material: Hot dip galvanized steel
Includes: Pipe mount
Order Separately: Saddle mount
)
m
91 ”
4m
or 36
m r
m ”o
10 24
(6
6” mm)
2.4
63” (15
(1.6m)
4-1/2” OD
(114.3mm)
(38 1 5 ”
1m ”
m) 20 mm)
8
(50
1 4-1/2” (114.3mm)
(2 1-7/ OD X 60” (1.5m)
82 6
.2m 4”
m)
1 ”
(36 4-1 1 4 mm)
8.3 /2” .6
mm 5
) (35
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 14
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 15
tower applications
universal taper pipe mount Ordering Information
towers
2-3/8” or 4-1/2” OD
(60.3mm or 114.3mm)
SM-U2080
SM-UADP SM-UT1012
15 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 16
tower applications
universal sliding pipe
Ordering Information
towers
Part Number Description Wt. lb Wt. kg Kit Qty.
mount kits 2-3/8” OD Universal Sliding Pipe Mount Kits
Application: Lattice towers PM-SU2-B Universal Sliding Pipe Mount Base Kit for 2-3/8” 80 32.3 Kit of 2
(60.3mm) OD pipe, Order pipe separately.
Size: 2-3/8” (60.3mm) or 4-1/2” (114.3mm) OD PM-SU2-72 Universal Sliding Pipe Mount Kit, 2-3/8” OD 101 45.8 Each
Design: Pipe with saddle mount and adjustable clamps X 72” (60.3mm OD X 1.8m) pipe.
PM-SU2-96 Universal Sliding Pipe Mount Kit, 2-3/8” OD 114 51.7 Each
Feature: Universal sliding bracket with up to 7o of taper. X 96” (60.3mm OD X 2.4m) pipe.
Mounts to: Straight or tapered legs up to 8” OD, 8” angle 60o, 4-1/2” OD Universal Sliding Pipe Mount Kits
or 6” angle 90o PM-SU4-B Universal Sliding Pipe Mount Base Kit, for 4-1/2” 81 36.8 Kit of 2
(114.3mm) OD pipe, Order pipe separately.
Material: Hot dip galvanized steel PM-SU4-63 Universal Sliding Pipe Mount Kit, 4-1/2” OD 138 62.6 Each
Includes: Universal saddle mount, sliding pipe mount brackets, X 63” (114.3mm OD X 1.6m) pipe.
with or without pipe PM-SU4-96 Universal Sliding Pipe Mount Kit, 4-1/2” OD 169 76.7 Each
X 96” (114.3mm OD X 2.4m) pipe.
Order Separately: Pipes for base kits
Wind Rating*: 120 mph per latest revision of TIA/EIA 222 at 150’ AGL
7-1/2”
(190mm)
*Typical installation of (1) 96” X 8” panel antenna per sector
2-3/8” or 4-1/2” OD
(60.3mm or 114.3mm)
10
’
(3. -6”
12 1m
’
(3.8 -6” )
m)
SA-B12 SA-B10
SA-B
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 16
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 17
tower applications
double antenna clamp Ordering Information
towers
crossover plates
Ordering Information
Clamp Style
CO-100 Crossover Plate. Joins two 1-1/2" OD to 16 7.3 Each
3-1/2" OD (38.1 mm OD to 88.9 mm OD)
round members.
CO-200 Crossover Plate. Joins two 2" OD to 5" OD 29 13.2 Each
(50.8 mm OD to 127 mm OD) round members.
CO-400 Crossover Plate. Joins two 2" to 5" OD 30 13.6 Each
(50.8 mm to 127 mm OD) to 4" to 9" OD
(101.6 mm to 228.6 mm OD) round members.
CO-78 Crossover Plate, 7/8" OD to 2-3/8" OD 16 7.3 Each
(31.8 mm OD to 60.3 mm OD) round members.
CO series XP series
17 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 18
tower applications
crossover angle
Ordering Information
towers
Part Number Description Wt. lb Wt. kg Kit Qty.
Application: Antenna mounting XA-2020 Crossover Angle, 2-3/8" OD to 2-3/8" OD 4 1.8 Kit of 2
(60.3 mm OD to 60.3 mm OD)
Size: 3" x 5" angle crossover
Design: U-bolt and angle
Feature: Allows pipe intersections
Mounts to: 2-3/8" OD pipe
Material: Hot dip galvanized steel
Includes: Angle and u-bolts
Order Separately: Pipe
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 18
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 19
tower applications
universal cable ladder kits
Ordering Information
towers
19 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 20
tower applications
welded universal cable Ordering Information
towers
Part Number Description Wt. lb Wt. kg Kit Qty.
ladder kit WL-1210-U Welded Cable Ladder Kit, 38" wide x
10' long (1 m wide x 3 m), 12-hole rung.
60 27.2 Each
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 20
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 21
tower applications
star support brackets
Ordering Information
towers
21 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 22
tower applications
cluster support brackets Ordering Information
towers
Part Number Description Wt. lb Wt. kg Kit Qty.
Application: Lattice tower
Cluster Support Brackets
Size: 3/4" (19.1 mm) and 7/16" (11.1 mm) holes
CS-B Cluster Support Bracket 3 1.4 Each
Design: Small and large versions
CS-B-R2 Cluster Support Bracket with 2" to 5" 7 3.2 Each
Feature: Oval design maximizes capacity (50.8 mm to 127.0 mm) OD
round member attachment.
Mounts to: Available with or without mounting hardware
CS-B-R6 Cluster Support Bracket with 6" to 8" 8 3.6 Each
Material: Hot dip galvanized steel (152.4 mm to 203.2 mm) OD
round member attachment.
Includes: Bracket
CS-B-2 Cluster Support Bracket with U-bolt for 2-3/8" 4 1.8 Each
Order Separately: U-bolts or wall anchors (60.3 mm) OD round member attachment.
CS-B-A Cluster Support Bracket with 4 1.8 Each
angle member attachment.
CS-BL-2 8-1/2”
(216mm)
10-5/8”
14-1/4” (269.9mm)
(362mm)
CS-BL-R2 (10 4”
1m
m)
CS-BL CS-B
.750” D
)
8” mm
r 1 57
” o or 4
13 m
m
30
(3
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 22
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 23
monopole applications
23 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 24
monopole applications
monopole co-location Ordering Information
monopole
Design: 3-sector MC-K12S-6-72 Monopole Co-location T-frame Kit, 957.0 434.1 Each
Feature: Complete co-location kit 10" - 30" OD, 36" stand-off, 12' 6" face,
with (6) 2-3/8" OD x 72" pipe mounts.
Mounts to: 10" to 60" (254 mm to 1542 mm) OD mono- MC-K12S-6-96 Monopole Co-location T-frame Kit, 1004.7 455.7 Each
pole 10" - 30" OD, 36" stand-off, 12' 6" face,
with (6) 2-3/8" OD x 96" pipe mounts.
Material: Hot dip galvanized steel
MC-K12S-9-72 Monopole Co-location T-frame Kit, 1055.4 478.7 Each
Includes: Ring mount, support arm, and pipe frame with 10" - 30" OD, 36" stand-off, 12' 6" face,
or without pipe mounts with (9) 2-3/8" OD x 72" pipe mounts.
Order Separately: Pipe mounts and work platforms MC-K12S-9-96 Monopole Co-location T-frame Kit, 1127.1 511.3 Each
10" - 30" OD, 36" sand-off, 12' 6" face,
with (9) 2-3/8" OD x 96" pipe mounts.
MC-K12S-12-72 Monopole Co-location T-frame Kit, 1153.8 523.4 Each
10" - 30" OD, 36" stand-off, 12' 6" face,
with (12) 2-3/8" OD x 72" pipe mounts.
MC-K12S-12-96 Monopole Co-location T-frame Kit, 1249.5 566.8 Each
10" - 30" OD, 36" stand-off, 12' 6" face,
with (12) 2-3/8" OD x 96" pipe mounts.
12' 6" (3.8 m) T-frame Kits, 30" to 60" (762 mm to 1524 mm) OD
MC-K12L-B Monopole Co-location T-frame Kit, 880.0 399.2 Each
30" - 60" OD, 36" stand-off, 12' 6" face.
Pipe mounts not included.
MC-K12L-6-72 Monopole Co-location T-frame Kit, 1076.7 488.4 Each
30" - 60" OD, 36" stand-off, 12' 6" face,
with (6) 2-3/8" OD x 72" pipe mounts.
MC-K12L-6-96 Monopole Co-location T-frame Kit, 1124.5 510.1 Each
30" - 60" OD, 36" stand-off, 12' 6" face,
with (6) 2-3/8" OD x 96" pipe mounts.
MC-K12L-9-72 Monopole Co-location T-frame Kit, 1175.2 533.1 Each
30" - 60" OD, 36" stand-off, 12' 6" face,
with (9) 2-3/8" OD x 72" pipe mounts.
MC-K12L-9-96 Monopole Co-location T-frame Kit, 1246.9 565.6 Each
30" - 60" OD, 36" stand-off, 12' 6" face,
with (9) 2-3/8" OD x 96" pipe mounts.
MC-K12L-12-72 Monopole Co-location T-frame Kit, 1273.7 577.8 Each
30" - 60" OD, 36" stand-off, 12' 6" face,
with (12) 2-3/8" OD x 72" pipe mounts.
MC-K12L-12-96 Monopole Co-location T-frame Kit, 1369.3 621.1 Each
30" - 60" OD, 36" stand-off, 12' 6" face,
with (12) 2-3/8" OD x 96" pipe mounts.
14' 6" (4.4 m) T-frame Kits, 16" to 30" (330.2 mm to 762 mm) OD
MC-K14S-B Monopole Co-location T-frame Kit, 831.9 377.3 Each
16" - 30" OD, 36" stand-off, 14' 6" face.
Pipe mounts not included.
MC-K14S-6-72 Monopole Co-location T-frame Kit, 1028.9 466.7 Each
16" - 30" OD, 36" stand-off, 14' 6" face,
with (6) 2-3/8" OD x 72" pipe mounts.
MC-K14S-6-96 Monopole Co-location T-frame Kit, 1076.7 488.4 Each
16" - 30" OD, 36" stand-off, 14' 6" face,
with (6) 2-3/8" OD x 96" pipe mounts.
MC-K14S-9-72 Monopole Co-location T-frame Kit, 1127.4 511.4 Each
16" - 30" OD, 36" stand-off, 14' 6" face,
with (9) 2-3/8" OD x 72" pipe mounts.
Face Width EPA (no ice, sq ft): EPA (1/2” radial ice, sq ft): MC-K14S-9-96 Monopole Co-location T-frame Kit, 1199.1 543.9 Each
16" - 30" OD, 36" stand-off, 14' 6" face,
12’ 6” Face 11.4 14.5 with (9) 2-3/8" OD x 96" pipe mounts.
14’ 6” Face 12.8 16.3 MC-K14S-12-72 Monopole Co-location T-frame Kit, 1225.9 556.1 Each
16" - 30" OD, 36" stand-off, 14' 6" face,
Man Rating: 250 lb vertical man load at 15 mph (BWS)
with (12) 2-3/8" OD x 72" pipe mounts.
MC-K14S-12-96 Monopole Co-location T-frame Kit, 1321.5 599.4 Each
Wind Rating*: 120 mph (BWS) per latest revision of TIA/EIA 222 16" - 30" OD, 36" stand-off, 14' 6" face,
140 mph 3-second gust, Exposure “D” per FBC, at 150’ AGL with (12) 2-3/8" OD x 96" pipe mounts.
*14' 6" T-frames interfere on pole diameters less than 16” OD.
*Typical installation of (4) 72” x 8” panel antennas per sector
T-frames continued on next page
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 24
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 25
monopole applications
monopole co-location
Ordering Information
25 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 26
monopole applications
low-profile co-location
Ordering Information
monopole
14’ 6” Face 10.2 13.1 2392.7 mm) circumference,
pipe mounts not included.
Man Rating: 250 lb vertical man load at 15 mph (BWS)
MC-PK14S-9-72 Low-Profile Co-location Platform Kit, 14' 6" 1518.9 689.0 Each
Wind Rating*: 120 mph (BWS) per latest revision of TIA/EIA 222 (4.4 m) face. 10" to 30" OD (254 mm to
140 mph 3-second gust, Exposure “D” per FBC, at 150’ AGL 762 mm), 31.4" to 94.2" (797.6 mm to
2392.7 mm) circumference. Nine 2-3/8" OD
x 72" (60.3 mm x 1.8 m) pipe mounts included.
MC-PK14S-9-96 Low-Profile Co-location Platform Kit, 14' 6" 1590.7 721.5 Each
*Typical installation of (4) 72” x 8” panel antennas per sector (4.4 m) face. 10" to 30" OD (254 mm to
762 mm), 31.4" to 94.2" (797.6 mm to
2392.7 mm) circumference. Nine 2-3/8" OD
x 96" (60.3 mm x 2.4 m) pipe mounts included.
MC-PK14S-9-126 Low-Profile Co-location Platform Kit, 14' 6" 1662.6 754.2 Each
(4.4 m) face. 10" to 30" OD (254 mm to
762 mm), 931.4" to 94.2" (797.6 mm to
2392.7 mm) circumference. Nine 2-3/8" OD
x 126" (60.3 mm x 3.2 m) pipe mounts included.
MC-PK14S-12-72 Low-Profile Co-location Platform Kit, 14' 6" 1617.4 733.7 Each
(4.4 m) face. 10" to 30" OD (254 mm
to 762 mm), 31.4" to 94.2" (797.6 mm to
2392.7 mm) circumference. Twelve 2-3/8" OD
x 72" (60.3 mm x 1.8 m) pipe mounts included.
MC-PK14S-12-96 Low-Profile Co-location Platform Kit, 14' 6" 1713.0 777.0 Each
(4.4 m) face. 10" to 30" OD (254 mm
to 762 mm), 31.4" to 94.2" (797.6 mm to
2392.7 mm) circumference. Twelve 2-3/8" OD
x 96" (60.3 mm x 2.4 m) pipe mounts included.
MC-PK14S-12-126 Low-Profile Co-location Platform Kit, 1809.0 820.6 Each
14' 6" (4.4 m) face. 10" to 30" OD (254 mm
to 762 mm), 31.4" to 94.2" (797.6 mm to
2392.7 mm) circumference. Twelve 2-3/8" OD
x 126" (60.3 mm x 3.2 m) pipe mounts included.
14' 6" (4.4 m) Co-location Platform Kits, 30" to 60" (762 mm to 1524 mm) OD
MC-PK14L-B Low-Profile Co-location Platform Kit, 14' 6" 1510.0 684.9 Each
(4.4 m) face. 30" to 60" OD (762 mm to
1524 mm), 94.2" to 188.4" (2392.7 mm to
4785.4 mm) circumference,
pipe mounts not included.
MC-PK14L-9-72 Low-Profile Co-location Platform Kit, 14' 6" 1805.5 819.0 Each
(4.4 m) face. 30" to 60" OD (762 mm to
1524 mm), 94.2" to 188.4" (2392.7 mm to
4785.4 mm) circumference. Nine 2-3/8" OD
x 72" (60.3 mm x 1.8 m) pipe mounts included.
MC-PK14L-9-96 Low-Profile Co-location Platform Kit, 14' 6" 1877.2 851.5 Each
(4.4 m) face. 30" to 60" OD (762 mm to
1524 mm), 94.2" to 188.4" (2392.7 mm to
4785.4 mm) circumference. Nine 2-3/8" OD
x 96" (60.3 mm x 2.4 m) pipe mounts included.
MC-PK14L-9-126 Low-Profile Co-location Platform Kit, 14' 6" 1949.2 884.2 Each
(4.4 m) face. 30" to 60" OD (762 mm to
1524 mm), 94.2" to 188.4" (2392.7 mm to
4785.4 mm) circumference. Nine 2-3/8" OD x
126" (60.3 mm x 3.2 m) pipe mounts included.
MC-PK14L-12-72 Low-Profile Co-location Platform Kit, 14' 6" 1904.0 863.7 Each
(4.4 m) face. 30" to 60" OD (762 mm to
1524 mm), 94.2" to 188.4" (2392.7 mm to
4785.4 mm) circumference. Twelve 2-3/8" OD
x 72" (60.3 mm x 1.8 m) pipe mounts included.
MC-PK14L-12-96 Low-Profile Co-location Platform Kit, 14' 6" 1999.6 907.0 Each
(4.4 m) face. 30" to 60" OD (762 mm to
1524 mm), 94.2" to 188.4" (2392.7 mm to
4785.4 mm) circumference. Twelve 2-3/8" OD
x 96" (60.3 mm x 2.4 m) pipe mounts included.
MC-PK14L-12-126 Low-Profile Co-location Platform Kit, 14' 6" 2095.6 950.6 Each
(4.4 m) face. 30" to 60" OD (762 mm to
1524 mm), 94.2" to 188.4" (2392.7 mm to
4785.4 mm) circumference. Twelve 2-3/8" OD
x 126" (60.3 mm x 3.2 m) pipe mounts included.
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 26
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 27
monopole applications
low-profile adjustable Ordering Information
12' 6" (3.8 m) Adjustable Platform Kits, 30" to 60" (762 mm to 1524 mm) OD
3-1/2” OD
MC-PA12L-B Low-Profile Adjustable Co-location Platform Kit, 1233.6 559.6 Each
(89mm) 12' (3.7 m) face. 30" to 60" OD (762 mm to
1524 mm OD), 94.2" to 188.4" (2392.7 mm
to 4785.4 mm) circumference,
pipe mounts not included.
MC-PA12L-9-72 Low-Profile Adjustable Co-location Platform Kit, 1529.1 693.6 Each
12' (3.7 m) face. 30" to 60" OD (762 mm to
1524 mm OD), 94.2" to 188.4" (2392.7 mm
to 4785.4 mm) circumference. Three 2-3/8" OD
x 72"(60.3 mm OD x 1.8 m) pipe mounts included.
MC-PA12L-9-96 Low-Profile Adjustable Co-location Platform Kit, 1600.8 726.1 Each
12' (3.7 m) face. 30" to 60" OD (762 mm to
1524 mm OD), 94.2" to 188.4" (2392.7 mm
to 4785.4 mm) circumference. Three 2-3/8" OD
14’ -6”
12’ -6” or 4.4m) x 96" (60.3 mm OD x 2.4 m)
(3.8m or
pipe mounts included.
MC-PA12L-9-126 Low-Profile Adjustable Co-location Platform Kit, 1672.8 758.8 Each
12' (3.7 m) face. 30" to 60" OD (762 mm to
1524 mm OD), 94.2" to 188.4" (2392.7 mm
to 4785.4 mm) circumference. Three 2-3/8" OD
x 126" (60.3 mm OD x 3.2 m)
pipe mounts included.
Face Width EPA (no ice, sq ft): EPA (1/2” radial ice, sq ft): MC-PA12L-12-72 Low-Profile Adjustable Co-location Platform Kit, 1627.6 738.3 Each
12' (3.7 m) face. 30" to 60" OD (762 mm to
12’ 6” Face 15.6 19.4 1524 mm OD), 94.2" to 188.4" (2392.7 mm
14’ 6” Face 17.6 21.8 to 4785.4 mm) circumference. Four 2-3/8" OD x
72" (60.3 mm OD x 1.8 m) pipe mounts included.
Man Rating: 250 lb vertical man load at 15 mph (BWS)
MC-PA12L-12-96 Low-Profile Adjustable Co-location Platform Kit, 1723.2 781.6 Each
Wind Rating*: 120 mph (BWS) per latest revision of TIA/EIA 222 12' (3.7 m) face. 30" to 60" OD (762 mm to
1524 mm OD), 94.2" to 188.4" (2392.7 mm
140 mph 3-second gust, Exposure “D” per FBC, at 150’ AGL to 4785.4 mm) circumference. Four 2-3/8" OD x
96" (60.3 mm OD x 2.4 m) pipe mounts included.
*Typical installation of (4) 72” x 8” panel antennas per sector MC-PA12L-12-126 Low-Profile Adjustable Co-location Platform Kit, 1819.2 825.2 Each
12' (3.7 m) face. 30" to 60" OD (762 mm to
1524 mm OD), 94.2" to 188.4" (2392.7 mm
to 4785.4 mm) circumference. Four 2-3/8" OD x
126" (60.3 mm OD x 3.2 m) pipe mounts included.
27 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 28
monopole applications
low-profile adjustable
Ordering Information
monopole
pipe mounts not included.
MC-PA14S-9-72 Low-Profile Adjustable Co-location Platform Kit, 1940.3 880.1 Each
14' (4.3 m) face. 10" to 30" OD (254 mm to
762 mm OD), 31.4" to 94.2" (797.6 mm to
2392.7 mm) circumference. Nine 2-3/8" OD x
72" (60.3 mm OD x 1.8 m)
pipe mounts included.
MC-PA14S-9-96 Low-Profile Adjustable Co-location Platform Kit, 2012.0 912.6 Each
14' (4.3 m) face. 10" to 30" OD (254 mm to
762 mm OD), 31.4" to 94.2" (797.6 mm to
2392.7 mm) circumference. Nine 2-3/8" OD x
96" (60.3 mm OD x 2.4 m)
pipe mounts included.
MC-PA14S-9-126 Low-Profile Adjustable Co-location Platform Kit, 2084.0 945.3 Each
14' (4.3 m) face. 10" to 30" OD (254 mm to
762 mm OD), 31.4" to 94.2" (797.6 mm to
2392.7 mm) circumference. Nine 2-3/8" OD x
126" (60.3 mm OD x 3.2 m)
pipe mounts included.
MC-PA14S-12-72 Low-Profile Adjustable Co-location Platform Kit, 2038.8 924.8 Each
14' (4.3 m) face. 10" to 30" OD (254 mm to
762 mm OD), 31.4" to 94.2" (797.6 mm to
2392.7 mm) circumference. Twelve 2-3/8" OD
x 72" (60.3 mm OD x 1.8 m)
pipe mounts included.
MC-PA14S-12-96 Low-Profile Adjustable Co-location Platform Kit, 2134.4 968.2 Each
14' (4.3 m) face. 10" to 30" OD (254 mm to
762 mm OD), 31.4" to 94.2" (797.6 mm to
2392.7 mm) circumference. Twelve 2-3/8" OD
x 96" (60.3 mm OD x 2.4 m)
pipe mounts included.
MC-PA14S-12-126 Low-Profile Adjustable Co-location Platform Kit, 2230.4 1011.7 Each
14' (4.3 m) face. 10" to 30" OD (254 mm to
762 mm OD), 31.4" to 94.2" (797.6 mm to
2392.7 mm) circumference. Twelve 2-3/8" OD
x 126" (60.3 mm OD x 3.2 m)
pipe mounts included.
14' 6" (4.4 m) Adjustable Platform Kits, 30" to 60" (762 mm to 1524 mm) OD
MC-PA14L-B Low-Profile Adjustable Co-location Platform Kit, 1764.6 800.4 Each
14' (4.3 m) face. 30" to 60" OD (762 mm to
1524 mm OD), 94.2" to 188.4" (2392.7 mm
to 4785.4 mm) circumference,
pipe mounts not included.
MC-PA14L-9-72 Low-Profile Adjustable Co-location Platform Kit, 2060.1 934.5 Each
14' (4.3 m) face. 30" to 60" OD (762 mm to
1524 mm OD), 94.2" to 188.4" (2392.7 mm
to 4785.4 mm) circumference. Nine 2-3/8" OD
x 72" (60.3 mm OD x 1.8 m)
pipe mounts included.
MC-PA14L-9-96 Low-Profile Adjustable Co-location Platform Kit, 2131.8 967.0 Each
14' (4.3 m) face. 30" to 60" OD (762 mm to
1524 mm OD), 94.2" to 188.4" (2392.7 mm
to 4785.4 mm) circumference. Nine 2-3/8"
OD x 96" (60.3 mm OD x 2.4 m)
pipe mounts included.
MC-PA14L-9-126 Low-Profile Adjustable Co-location Platform Kit, 2203.8 999.6 Each
14' (4.3 m) face. 30" to 60" OD (762 mm to
1524 mm OD), 94.2" to 188.4" (2392.7 mm
to 4785.4 mm) circumference. Nine 2-3/8"
OD x 126" (60.3 mm OD x 3.2 m)
pipe mounts included.
MC-PA14L-12-72 Low-Profile Adjustable Co-location Platform Kit, 2158.6 979.1 Each
14' (4.3 m) face. 30" to 60" OD (762 mm to
1524 mm OD), 94.2" to 188.4" (2392.7 mm
to 4785.4 mm) circumference. Twelve 2-3/8"
OD x 72" (60.3 mm OD x 1.8 m)
pipe mounts included.
MC-PA14L-12-96 Low-Profile Adjustable Co-location Platform Kit, 2254.2 1022.5 Each
14' (4.3 m) face. 30" to 60" OD (762 mm to
1524 mm OD), 94.2" to 188.4" (2392.7 mm
to 4785.4 mm) circumference. Twelve 2-3/8"
OD x 96" (60.3 mm OD x 2.4 m)
pipe mounts included.
MC-PA14L-12-126 Low-Profile Adjustable Co-location Platform Kit, 2350.2 1066.1 Each
14' (4.3 m) face. 30" to 60" OD (762 mm to
1524 mm OD), 94.2" to 188.4" (2392.7 mm
to 4785.4 mm) circumference. Twelve 2-3/8"
OD x 126" (60.3 mm OD x 3.2 m)
pipe mounts included.
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 28
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 29
monopole applications
universal ring mounts Ordering Information
Wind Rating*: 140 mph (BWS) per latest revision of TIA/EIA 222
160 mph 3-second gust, Exposure “D” per FBC, at 150’ AGL
*Typical installation of (4) 72” x 8” panel antennas per sector on a 14' 6" face
MC-RM1030-3
MC-RM3060-4
29 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 30
monopole applications
support arms for ring mounts
Ordering Information
monopole
long, with 4-1/2" OD x 18" (114.3 mm OD x
Mounts to: Ring mounts 0.5 m) pipe.
Material: Hot dip galvanized steel MT-198 Double Pipe Support Arm, 63" (1.6 m) long. 102.9 46.7 Each
Order 2-3/8" (60.3 mm) OD pipes separately.
Includes: Hardware Includes U-bolts.
Order Separately: Ring mount, antenna pipes, and cellular pipe frame MT-198-C Double Pipe Curved Support Arm, 63" (1.6 m) 123.0 55.8 Each
long. Order 2-3/8" (60.3 mm) OD pipes
separately. Includes U-bolts.
MC-DA14-B Double Pipe Support Arm, 14" (355.6 mm). 83.5 37.9 Each
Order 2-3/8" (60.3 mm) OD pipes separately.
Includes U-bolts.
MC-SA40-B Stand-off Arm, 40" (1 m). Order 2-3/8" 73.0 33.1 Each
(60.3 mm) OD pipes separately. Includes U-bolts.
4-1/2” OD
(114.3mm)
10” Square
(254.0mm)
MC-DA14-B
36
(0.9 ” or 4
m or 8”
1.2m
)
MT-197
10” Square
(254mm)
10” Square
40” (254mm)
(1.0
m)
39.5”
(1.0m)
MC-SA40-B
MT-197-C
4” X 4” X 1/4”
(101.6mm X 101.6mm X 6.4mm)
10” Square
(254mm)
10” Square
(254mm)
6
(1.5 3”
8m
)
10”
(254mm)
39.5”
(1.0m)
MT-198
MT-198-C
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 30
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 31
monopole applications
work platform for
Ordering Information
Application: Monopoles WP-198 Work Platform for Double Pipe Support Arm 92.1 41.8 Each
(MT-198)
Size: 12" (304.8 mm) wide grating
monopole
WP-197 WP-198
MT-197 MT-197-C
MC-DA14-B
31 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 32
monopole applications
cellular pipe frames
Ordering Information
Application: Monopoles MT-216-6NS Cellular Pipe Frame, 6' 6" (2 m) wide. 50.2 22.8 Each
Size: Four versions MT-216-10NS Cellular Pipe Frame, 10' 6" (3.2 m) wide. 98.2 44.5 Each
MT-216-NS Cellular Pipe Frame, 12' 6" (3.8 m) wide. 122.2 55.4 Each
Design: Flush mount single pipe frame
MT-216-14NS Cellular Pipe Frame, 14' 6" (4.3 m) wide. 146.2 66.3 Each
Feature: Allows easy antenna downtilt and center
monopole
WP-216 Work Platform for Cellular Pipe Frame 119.5 54.2 Each
mounting capabilities
Mounts to: 4-1/2" (114.3 mm) OD
Face Width EPA (no ice, sq ft): EPA (1/2” radial ice, sq ft):
Material: Hot dip galvanized steel
6’ 6” Face 5.31 7.30
Includes: Pipe and crossover plate
10’ 6” Face 6.46 8.95
Order Separately: Pipe mount kits and work platform 12’ 6” Face 11.40 14.50
3-1/2” OD 14’ 6” Face 12.80 16.30
(89mm)
MT-216-NS
2-3/8” OD
(60.3mm OD)
38-1/4”
(971.6mm)
1
(3.0 0’
m) 12”
(305mm)
WP-216
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 32
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 33
monopole applications
low profile co-location
Ordering Information
Design: Corner-grated platform ring mount and pipe mount kits separately.
MT-196-14L Low Profile Co-location Platform, 1280.8 581.0 Each
Feature: Simplified installation 14' 6" (4.4 m) face. Order 30" to 60" ring
Mounts to: Ring mount mount and pipe mount kits separately.
Application: Monopoles MT-195-14 Upper Support Rail Kit for Co-location Platforms, 316.6 143.6 Each
14' 6" face.
Size: 12' 6" (3.8 m) or 14' 6" (4.4 m)
Design: Clamp-on upper support rail
Feature: Allows two pipe mounting points
Mounts to: MT-196, MC-PK or MC-PA series
Material: Hot dip galvanized steel
Includes: Rail, twelve crossover angles, and hardware
Order Separately: Platform and pipe mount kits
33 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 34
monopole applications
low profile chain mounts
Ordering Information
monopole
CM-30S-72 Single Chain Mount Kit, One 2-3/8" OD x 47.76 21.7 Each
Mounts to: 8" to 60" (203.2 mm to 1524 mm) OD 72" pipe, 8' chain
Material: Hot dip galvanized steel CM-30S-96 Single Chain Mount Kit, One 2-3/8" OD x 60.26 27.3 Each
96" pipe, 8' chain
Includes: See table
CM-30D-B Double Chain Mount Base Kit, 8' chain, 38.76 17.6 Each
Order Separately: — 2-3/8" OD pipe sold separately.
CM-30D-72 Double Chain Mount Kit, Two 2-3/8" OD x 80.76 36.6 Each
72" pipes, 8' chain
CM-30D-96 Double Chain Mount Kit, Two 2-3/8" OD x 105.76 48.0 Each
96" pipes, 8' chain
CM-30T-B Triple Chain Mount Base Kit, 8' chain, 50.76 23.0 Each
2-3/8" OD pipe sold separately.
CM-30T-72 Triple Chain Mount Kit, Three 2-3/8" OD x 113.76 51.6 Each
72" pipes, 8' chain
CM-30T-96 Triple Chain Mount Kit, Three 2-3/8" OD x 151.26 68.6 Each
96" pipes, 8' chain
Single, Double, and Triple Chain Mount Kits, 8" to 60" (203.2 mm to 1524 mm) OD,
25" to 188" (635 mm to 4785 mm) circumference
CM-60S-B Single Chain Mount Base Kit, 2-3/8" OD pipe, 38.78 17.6 Each
16' chain
CM-60S-72 Single Chain Mount Kit, One 2-3/8" OD x 59.76 27.1 Each
72" pipe, 16' chain
single chain mount double chain mount CM-60S-96 Single Chain Mount Kit, One 2-3/8" OD x 72.26 32.8 Each
96" pipe, 16' chain
CM-60D-B Double Chain Mount Base Kit, 16' chain, 50.76 23.0 Each
2-3/8" OD pipe sold separately.
CM-60D-72 Double Chain Mount Kit, Two 2-3/8" OD x 92.76 42.1 Each
72" pipes, 16' chain
CM-60D-96 Double Chain Mount Kit, Two 2-3/8" OD x 117.76 53.4 Each
96" pipes, 16' chain
CM-60T-B Triple Chain Mount Base Kit, 16' chain, 62.76 28.5 Each
2-3/8" OD pipe sold separately.
CM-60T-72 Triple Chain Mount Kit, Three 2-3/8" OD x 123.76 56.1 Each
72" pipes, 16' chain
CM-60T-96 Triple Chain Mount Kit, Three 2-3/8" OD x 163.26 74.1 Each
96" pipes, 16' chain
Six Antenna Chain Mount Kits, 14” to 60” (356mm to 1524mm) OD, 44” to 188”
(1117mm to 4785mm) circumference
CM-606-B Six Antenna Mount Kit, 16’ chain, 2-3/8” OD 98.7 44.7 Each
pipe sold separately
CM-606-72 Six Antenna Mount Kit, Three 2-3/8” OD X 231 104.8 Each
72” pipes, 16’ chain
triple chain mount CM-606-96 Six Antenna Mount Kit, Three 2-3/8” OD X 275 124.7 Each
96" pipes, 16' chain
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 34
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 35
monopole applications
light duty chain mounts Ordering Information
CM-L30-63 Light Duty Chain Mount Kit, 4-1/2" OD x 63" 90.64 41.1 Each
Mounts to: 8" (203.2 mm) to 60" (1.5 m) OD – two versions pipe mount, 8' chain
Material: Hot dip galvanized steel
Light Duty Chain Mount Kits, 8" to 60" (203.2 mm to 1524 mm) OD,
Includes: Pipe mounts and chains 25" to 188" (635 mm to 4785 mm) circumference
Order Separately: Stiff arm and pipe mounts as needed CM-L60-B Light Duty Chain Mount Base Kit, 16' chain, 38.14 17.3 Each
pipe mount sold separately.
CM-L60-63 Light Duty Chain Mount Kit, 4-1/2" OD x 63" 102.64 46.6 Each
pipe mount, 16' chain
35 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 36
monopole applications
heavy duty chain mounts Ordering Information
monopole
CM-H30-63 Heavy Duty Chain Mount Kit, 4-1/2" 116.62 52.9 Each
Mounts to: 8" (203.2 mm) to 60" (1.5 m) OD – two versions OD x 63" pipe mount, 8' chain
Material: Hot dip galvanized steel
Heavy Duty Chain Mount Kits, 8" to 60" (203.2 mm to 1524 mm) OD,
Includes: Pipe mounts and chains 25" to 188" (635 mm to 4785 mm) circumference
Order Separately: Stiff arm and pipe mounts as needed CM-H60-B Heavy Duty Chain Mount Base Kit, 16' chain, 76.12 34.5 Each
pipe mount sold separately.
CM-H60-63 Heavy Duty Chain Mount Kit, 4-1/2" 140.62 63.8 Each
OD x 63" pipe mount, 16' chain
*Typical installation of (1) 8’ Standard with Radome Microwave Antenna with stiff arm
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 36
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 37
monopole applications
monopole stiff arm mounts
Ordering Information
CM-SH30 Heavy Duty Stiff Arm Mount, Double 8' 50.0 22.7 Each
Mounts to: 8" (203.2 mm) to 60" (1.5 m) OD – two versions (2.4 m) chains.
Material: Hot dip galvanized steel
Monopole Stiff Arm Mount Kits, 8" to 60" (203.2 mm to 1524 mm) OD,
Includes: Arm and chains 25" to 188" (635 mm to 4785 mm) circumference
Order Separately: Antenna chain mount and stiff arm CM-SL60 Light Duty Stiff Arm Mount, Single 16' 43.0 19.5 Each
(4.9 m) chain.
CM-SH60 Heavy Duty Stiff Arm Mount, Double 16' 62.0 28.1 Each
(4.9 m) chains.
6” 46” )
4 6m
6m) (1.1
(1.1
1.25”
(31.75mm)
(76 3 ”
.2m
m )
2”
(50.8mm)
37 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 38
monopole applications
universal round member
Ordering Information
monopole
Design: Coaxial cable support for round members
Feature: Ideal for co-location
Mounts to: Round members
Material: Hot dip galvanized steel
Includes: Bracket
Order Separately: Banding
RM-USBG
RM-USBG-3
Material: Stainless steel and galvanized versions MT-643 1/2" (12.7 mm) Galvanized Buckle Clamps 1.9 0.9 Kit of 100
MT-644 C-2 Banding Tool 1.7 0.8 Each
Includes: See table
MT-645 12 oz (0.3 kg) Hammer 1.7 0.8 Each
Order Separately: —
MT-646 Metal Snips 0.8 0.4 Each
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 38
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 39
roof-top applications
39 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 40
roof-top applications
non-penetrating roof frames Ordering Information
roof-top
Non-Penetrating Roof Frame, 10' 6" (3.2 m) wide
RF-N10-B Non-Penetrating Roof Frame, 10' 6" (3.2 m). 356.3 161.6 Each
2-3/8" (60.3 mm) OD pipe not included.
RF-N10-3-72 Non-Penetrating Roof Frame, 10' 6" (3.2 m). 421.1 191.0 Each
Three 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)
pipe mounts included.
RF-N10-3-96 Non-Penetrating Roof Frame, 10' 6" (3.2 m). 442.7 200.8 Each
Three 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)
pipe mounts included.
RF-N10-3-126 Non-Penetrating Roof Frame, 10' 6" (3.2 m). 469.7 213.1 Each
Three 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)
pipe mounts included.
RF-N10-4-72 Non-Penetrating Roof Frame, 10' 6" (3.2 m). 442.7 200.8 Each
Four 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)
pipe mounts included.
RF-N10-4-96 Non-Penetrating Roof Frame, 10' 6" (3.2 m). 471.5 213.9 Each
Four 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)
pipe mounts included.
RF-N10-4-126 Non-Penetrating Roof Frame, 10' 6" (3.2 m). 507.5 230.2 Each
Four 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)
pipe mounts included.
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 40
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 41
roof-top applications
non-penetrating roof frames
Ordering Information
RF-N12-4-72 Non-Penetrating Roof Frame, 12' 6" (3.8 m). 458.4 207.9 Each
Four 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)
pipe mounts included.
RF-N12-4-96 Non-Penetrating Roof Frame, 12' 6" (3.8 m). 487.2 221.0 Each
Four 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)
pipe mounts included.
RF-N12-4-126 Non-Penetrating Roof Frame, 12' 6" (3.8 m). 523.2 237.3 Each
Four 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)
pipe mounts included.
universal tripod ballast mount roof-top ladder tray wall coaxial cable support kits
41 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 42
roof-top applications
multi-sector roof frame Ordering Information
roof-top
multi-sector roof frame
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 42
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 43
roof-top applications
roof-top mount
Ordering Information
43 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 44
roof-top applications
universal tripod mounts Ordering Information
roof-top
(114.3 mm) OD pipe (purchased separately).
TP-G412-72 Universal Tripod Mount, 4-1/2" OD x 72" 238.2 108.0 Each
(114.3 mm OD x 1.8 m)
TP-G412-96 Universal Tripod Mount, 4-1/2" OD x 96" 259.8 117.8 Each
(114.3 mm OD x 2.4 m)
TP-G412-126 Universal Tripod Mount, 4-1/2" OD x 126" 286.8 130.1 Each
(114.3 mm OD x 3.2 m)
TP-G412-150 Universal Tripod Mount, 4-1/2" OD x 150" 308.4 139.9 Each
(114.3 mm OD x 3.8 m)
Application: Roof-top MT-F1637 Rubber Mat, 1/2" x 18" x 48" 16.2 7.3 Each
(12.7 mm x 0.5 m x 1.2 m).*
Size: 87" (2.2 m) faces Six mats required for ballast tray.
Design: Converts tripods to non-penetrating
Feature: Three ballast trays
Mounts to: —
Material: Hot dip galvanized steel
Includes: Sled only
Order Separately: Tripod and rubber mats
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 44
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 45
roof-top applications
non-penetrating parapet
Ordering Information
Order Sep.: –
45 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 46
roof-top applications
aluminum tripod mount Ordering Information
roof-top
stand-off wall mount Ordering Information
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 46
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 47
roof-top applications
cantilever wall
Ordering Information
Application: Roof-top MT-250L Cantilever Wall Mount Bracket. 5-1/2" Stand-off. 24.5 11.1 Kit of 2
Order 2-3/8" (60.3 mm) OD pipe separately.
Size: 14-1/2" (368.3 mm) wide, 2-3/4" or
5-1/2" depth
Design: Z-shaped wall brackets
Feature: Low profile design
Mounts to: Solid or hollow walls
Material: Hot dip galvanized steel
Includes: Two brackets, U-bolts, anchors, and
wall mount hardware
roof-top
Application: Roof-top
Corner Wall Mount with 2-3/8" OD antenna pipe
Size: Four versions
CW-M2-63 Corner Wall Mount, 2-3/8" OD x 63" 123.7 56.1 Each
Design: V-shaped corner mount (60.3 mm OD x 1.6 m) pipe.
Feature: Adjustable clamp spacing CW-M2-96 Corner Wall Mount, 2-3/8" OD x 96" 133.6 60.6 Each
(60.3 mm OD x 2.4 m) pipe.
Mounts to: Wall corners
Material: Hot dip galvanized steel Corner Wall Mount with 4-1/2" OD antenna pipe
Includes: Two brackets, pipe mount, and wall mount CW-M4-63 Corner Wall Mount, 4-1/2" OD x 63" 161.5 73.3 Each
(114.3 mm OD x 1.6 m) pipe.
hardware
CW-M4-96 Corner Wall Mount, 4-1/2" OD x 96" 191.2 86.7 Each
Order Separately: — (114.3 mm OD x 2.4 m) pipe.
47 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 48
roof-top applications
adjustable wall mounts Ordering Information
roof-top
Optional Backing Plate
MT-223 Backing Plate Kit (optional) 23.1 10.5 Kit of 2
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 48
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 49
roof-top applications
self splicing, coax cover kits
Ordering Information
Application: Roof-top RT-CB8D Roof-Top Cover Kits for SnapStak™ 122.5 55.6 Each
Snap-in Hangers, 8 holes
Size: 8' (2.4 m) long
RT-CB12D Roof-Top Cover Kits for SnapStak™ 162.5 73.7 Each
Design: Self-splicing cover with PVC sleeper supports and Snap-in Hangers, 12 holes
hold-down clamps, simplified cover installation
Feature: Stack up to (2) 1-5/8" or (3) 7/8" SnapStak™
hangers per hole – three versions
Mounts to: Non-penetrating design
Material: Galvanized steel
Includes: Channel, three sleepers, hold-down clamps, and
roof-top
hardware
Order Separately: Adjustable splice for roof-top coaxial cable bridge
”
96 m)
4
(2.
7”
(177.8mm)
4” Square
(101.6mm)
Size: 8' (2.4 m) long MT-F1542-11 Roof-Top Coax Bridge Kit for 4 runs of coaxial 76.6 34.7 Each
cable.12-gauge (3 mm) cover.
Design: Self-splicing cover with PVC sleeper supports
MT-F1543 Roof-Top Coax Bridge Kit for 8 runs of coaxial 112.3 50.9 Each
and hold-down clamps, simplified cover instal- cable.12-gauge (3 mm) cover.
lation
MT-F1595 Roof-Top Coax Bridge Kit for 12 runs of 180.4 81.8 Each
Feature: 4-, 8- and 12-run versions coaxial cable.12-gauge (3 mm) cover,
includes 4 and 8 run covers.
Mounts to: Non-penetrating design
Material: Galvanized steel
Includes: Channel, three sleepers, hold down clamps, 3-1/2”
(88.9mm)
and hardware
Order Separately: Adjustable splice for roof-top coaxial cable
bridge
96”
(2.4m)
4” Square
(101.6mm)
11-1/4” or 21-1/4”
(285.8mm or 539.8mm)
49 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 50
roof-top applications
adjustable splice for roof-top Ordering Information
roof-top
hardware kits for
Ordering Information
MT-421 MT-422
App.: Roof-top RT-ST Roof-Top Cable Tray Step Over 211.0 95.7 Each
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 50
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 51
roof-top applications
extension kit for roof-top Ordering Information
(1 40”
.0
m
)
(61 2 4 ”
0m
m )
Size: Seven widths MT-F1724 PVC Roof Sleeper for 3 runs of coaxial cable 2.4 1.1 Each
MT-F1598 PVC Roof Sleeper for 4 runs of coaxial cable 2.9 1.3 Each
Design: 4" (101.6 mm) square coaxial cable support
MT-F1725 PVC Roof Sleeper for 6 runs of coaxial cable 5.4 2.4 Each
Feature: 3/4" (19.1 mm) holes for SnapStak™
MT-F1599 PVC Roof Sleeper for 8 runs of coaxial cable 5.3 2.4 Each
snap-in hangers
MT-F1726 PVC Roof Sleeper for 9 runs of coaxial cable 5.7 2.6 Each
Mounts to: Non-penetrating design
MT-F1600 PVC Roof Sleeper for 12 runs of coaxial cable 7.3 3.3 Each
Material: PVC
Includes: —
Order Separately: —
3/4” dia.
(19.1mm)
7/16” dia.
(11.1mm)
1/4” dia.
(6.4mm)
4”
(101.6mm)
4”
(101.6mm)
51 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 52
roof-top applications
rubber sleeper pad Ordering Information
roof-top
10’ or 50’ 1/4”
(3.0 m or 15.2 m) (6.4 mm)
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 52
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 53
roof-top applications
wall coax support kits
Ordering Information
Size: 8' (2.4 m) long MT-F1590 Wall Coax Support Kit for 8 runs of coaxial cable 73.8 33.5 Each
MT-F1591 Wall Coax Support Kit for 12 runs of coaxial 102.7 46.6 Each
Design: Solid cover with wall mount brackets cable, self-splicing.
Feature: 4-, 8- and 12-run versions
Mounts to: Penetrating design
Material: Galvanized steel
Includes: Channel, 2 brackets, and hardware
Order Separately: Anchors
roof-top
MT-F1589 MT-F1591
"
Design: Bracket for walls or ceilings MT-F1588 Wall-Mount Bracket for 12 runs of coaxial cable 6.2 2.8 Each
53 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 54
roof-top applications
z-bracket, wall coax support Ordering Information
roof-top
Order Separately: Z-brackets and anchors
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 54
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 55
roof-top applications
4" ladder tray,
Ordering Information
55 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 56
roof-top applications
4" ladder tray, 90° Ordering Information
roof-top
4" ladder tray, 90° Ordering Information
Design: Ladder-style coaxial cable support LT-RI90-24-4D Inside Vertical Riser, 24" (0.6 m) wide 4.0 1.8 Each
Feature: Inside and outside vertical riser versions Outside Vertical Risers
Mounts to: Ladder tray system LT-RO90-12-4D Outside Vertical Riser, 12" (0.3 m) wide 3.0 1.4 Each
Material: Aluminum LT-RO90-18-4D Outside Vertical Riser, 18" (0.5 m) wide 3.4 1.5 Each
Includes: Ladder and one pair of splice plates LT-RO90-24-4D Outside Vertical Riser, 24" (0.6 m) wide 4.0 1.8 Each
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 56
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 57
roof-top applications
4" ladder tray, t-junction
Ordering Information
Design: Ladder-style coaxial cable support LT-TJ-24-4D Ladder Tray T-junction, 24" (0.6 m) wide 17.6 8.0 Each
57 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 58
roof-top applications
ladder tray covers Ordering Information
Mounts to: Ladder tray system LT-VSS-24-A Ladder Tray Solid Straight Cover, 15.3 6.9 Kit of 2
24" (0.6 m) wide, two pieces
Material: Aluminum
Includes: Cover 45° Horizontal Bend Covers
Order Separately: Tray and accessories LT-V45-12-A Ladder Tray Solid 45 Degree Bend Cover, 1.7 0.8 Each
12" (0.3 m) wide
LT-V45-18-A Ladder Tray Solid 45 Degree Bend Cover, 2.6 1.2 Each
roof-top
18" (0.5 m) wide
LT-V45-24-A Ladder Tray Solid 45 Degree Bend Cover, 3.6 1.6 Each
24" (0.6 m) wide
T-junction Covers
LT-VTJ-12-A Ladder Tray Solid T-junction Cover, 6.2 2.8 Each
12" (0.3 m) wide
LT-VTJ-18-A Ladder Tray Solid T-junction Cover, 8.8 4.0 Each
18" (0.5 m) wide
LT-VTJ-24-A Ladder Tray Solid T-junction Cover, 11.8 5.4 Each
24" (0.6 m) wide
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 58
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 59
ground buss
bar kits (p. 79-81)
59 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 60
overflow pipe
climbing ladder
leg supports
water tower
rainproof roof hatch
multi-leg
roof vent roof access
shell roof top
platform
handrail
access tube
shell
ballisters
riser shaft
standpipe
rainproof roof hatch
roof vent
condensate ceiling
water reservoir
access tube
bell
platform
pedisphere stiffener rings
condensate ceiling
fluted column
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 60
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 61
Design: Pod for tank-top antenna support Assembly Base with 3-sector platform, 12' 6" (3.8 m) wide face
Feature: Stackable for co-location WT-SPM12-B Stackable Pod Mount Assembly, 2611.4 1184.5 Each
3-sector platform, 12' 6" (3.8 m) wide face.
Mounts to: 48" (1.2 m) OD hatch plate pipe mount kits not included.
Material: Hot dip galvanized steel WT-SPM12-9-72 Stackable Pod Mount Assembly, 2906.6 1318.4 Each
Includes: Mount and platform, with or without pipe mounts 3-sector platform, 12' 6" (3.8 m) wide face.
Nine 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)
Order Separately: — pipe mounts included.
WT-SPM12-9-96 Stackable Pod Mount Assembly, 2978.6 1351.1 Each
3-sector platform, 12' 6" (3.8 m) wide face.
Nine 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)
pipe mounts included.
WT-SPM12-9-126 Stackable Pod Mount Assembly, 3050.6 1383.8 Each
3-sector platform, 12' 6" (3.8 m) wide face.
Nine 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)
water tower
Assembly Base with 3-sector platform, 14' 6" (4.4 m) wide face
WT-SPM14-B Stackable Pod Mount Assembly, 2645.5 1200.0 Each
3-sector platform, 14' 6" (4.4 m) wide face.
Pipe mount kits not included.
WT-SPM14-9-72 Stackable Pod Mount Assembly, 2940.7 1333.9 Each
3-sector platform, 14' 6" (4.4 m) wide face.
Nine 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)
pipe mounts included.
WT-SPM14-9-96 Stackable Pod Mount Assembly, 3012.7 1366.6 Each
3-sector platform, 14' 6" (4.4 m) wide face.
Nine 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)
pipe mounts included.
WT-SPM14-9-126 Stackable Pod Mount Assembly, 3084.7 1399.2 Each
3-sector platform, 14' 6" (4.4 m) wide face.
Nine 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)
pipe mounts included.
WT-SPM14-12-72 Stackable Pod Mount Assembly, 3039.1 1378.5 Each
WT-SPM12-B 3-sector platform, 14' 6" (4.4 m) wide face.
Twelve 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)
pipe mounts included.
WT-SPM14-12-96 Stackable Pod Mount Assembly, 3135.1 1422.1 Each
3-sector platform, 14' 6" (4.4 m) wide face.
Twelve 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)
pipe mounts included.
WT-SPM14-12-126 Stackable Pod Mount Assembly, 3231.1 1465.6 Each
3-sector platform, 14' 6" (4.4 m) wide face.
Twelve 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)
pipe mounts included.
61 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 62
water tower
stackable pod
Ordering Information
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 62
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 63
63 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:01 AM Page 64
Application: Water tower WT-RTA7-96E Water Tower Roof-top Sector Frame Extension, 188.9 85.7 Each
7' (2.1 m) long
Size: 6' (1.8 m) or 7' (2.1 m) long
Design: Modular roof-top antenna mount
Feature: Linkable to form corral mounts
Mounts to: Weld-on feet
Material: Hot dip galvanized steel
Includes: Mount and 2-3/8" OD x 96" (73 mm OD x
2.4 m) pipe
Order Separately: —
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 64
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 65
Application: Water tower WT-HRM2-72 Hand Rail Mount, 2-3/8" x 72" 42.1 19.1 Each
(60.3 mm OD x 1.8 m) mounting pipe included.
Size: 9" (228.6 mm) stand-off
WT-HRM2-96 Hand Rail Mount, 2-3/8" OD x 96" 49.3 22.4 Each
Design: Adjustable bolt-on design (60.3 mm OD x 2.4 m) mounting pipe included.
Feature: Adapts to most handrail types WT-HRM2-126 Hand Rail Mount, 2-3/8" OD x 126" 58.3 26.4 Each
(60.3 mm OD x 3.2 m) mounting pipe included.
Mounts to: Handrail and toe board
Material: Hot dip galvanized steel
Includes: Mount and hardware, available with or with-
out pipe mount kits
Order Separately: Pipe
See Table
3-1/2”
(88.9mm)
water tower
11-5/8”
(295.3mm)
2-1/2”
(63.5mm)
9-7/8”
(250.8mm)
Application: Water tower VC-WGSO-4 Water Tower Waveguide Stand-off Bracket 3.3 1.5 Each
for 4 runs of coaxial cable.
Size: 3/4" (19.1 mm) and 7/16" (11.1 mm) holes
VC-WGSO-7 Water Tower Waveguide Stand-off Bracket 4.2 1.9 Each
Design: Bolt on design in four widths for 7 runs of coaxial cable.
Feature: Flexibility to handle curved surfaces VC-WGSO-12 Water Tower Waveguide Stand-off Bracket 5.8 2.6 Each
for 12 runs of coaxial cable.
Mounts to: Water tower surface
Material: Hot dip galvanized steel
Includes: Bracket
Order Separately: —
5-3
/4”
,1
5”,
24
”, o
r4
0”
3/4” dia.
(19.1mm)
7/16” dia.
(11.1mm)
/8” )
6-1.3mm
(95
65 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 66
water tower
Andrew’s new Ex-PressTM Expansion/Compression Coaxial
Mounting Band will support multiple coaxial cables on or
inside a round or polygon structure up to 60” in diameter.
The Ex-PressTM Band will allow the user to attach coaxial
using Snap-in or SnapstakTM Hangers, Butterfly Hangers, as
well as coaxial or mini blocks.
Ex-PressTM Coax Mounting Band
1.25”
(31.75mm)
(76 3 ”
.2m
m )
2”
(50.8mm)
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 66
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 67
trapeze kit
(p. 75–76)
67 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 68
Order Separately: Additional accessories WB-K210-B15 Safety Grated Waveguide Bridge Kit, 415.3 188.4 Each
24" x 10' (0.6 m x 3.0 m), with
(2) 15' 4" (4.7 m) direct burial posts
WB-K210-B21 Safety Grated Waveguide Bridge Kit, 501.2 227.3 Each
24" x 10'(0.6m x 3.0 m), with
(2) 21' (6.4m) direct burial posts
WB-K210-S Safety Grated Waveguide Bridge Kit, 367.0 166.5 Each
24" x 10' (0.6 m x 3.0 m),
with (2) 10' 6" (3.2 m) base shoe posts
waveguide
WB-K110-B WB-K210-S
Application: Waveguide bridge with (4) 13' 4" (4.1 m) direct burial posts
Size: 24" x 10' (0.6 m x 3.0 m) WB-K410-B15 Safety Grated Waveguide Bridge Kit, 656.6 297.8 Each
24" X 10' (0.6 m x 3.0 m), with
Design: Four-post, safety grating (4) 15' 4" (4.7 m) direct burial posts
Feature: Complete kit for coaxial cable support WB-K410-B21 Safety Grated Waveguide Bridge Kit, 828.3 373.7 Each
24" X 10' (0.6 m x 3.0 m), with
Mounts to: — (4) 21' (6.4 m) direct burial posts
Material: Hot dip galvanized steel WB-K410-S Safety Grated Waveguide Bridge Kit, 560.0 254.0 Each
24" x 10' (0.6 m x 3.0 m),
Includes: Channel, posts, support brackets, caps, tra- with (4) 10' 6" (3.2 m) base shoe posts
peze, and hardware
Order Separately: Additional accessories
WB-K410-B WB-K410-S
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 68
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 69
69 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 70
waveguide
Application: Waveguide bridge
Size: 24" (0.6 m) wide, 8-1/2" (215.9 mm) long
Design: Hinged extension for safety grated bridge
Feature: Up to 45° vertical adjustment
Mounts to: Waveguide bridge kits
Material: Hot dip galvanized steel
Includes: Extension and hardware
Order Separately: —
Application: Waveguide bridge WB-CY210 Safety Grated Waveguide Bridge Channel, 111.0 50.3 Each
24" x 10' (0.6 m x 3 m)
Size: 12" (0.3 m) or 24" (0.6 m) wide
Design: Grated, open-diamond pattern
Feature: Safer, versatile bridge
Mounts to: —
Material: Hot dip galvanized steel
Includes: Bridge channel
Order Separately: Posts and accessories
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 70
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 71
Design: Support pipe in six lengths MT-547 Direct Burial Pipe Column, 21' (6.4 m) 159.0 72.1 Each
Feature: Direct burial and base shoe versions Base Shoe Pipe Columns
Mounts to: Waveguide bridge support brackets MF-126 Base Shoe Pipe Column, 10' 6" (3.2 m) 92.0 41.7 Each
Material: Hot dip galvanized steel MF-279 Base Shoe Pipe Column, 12' (3.7 m) 103.0 46.7 Each
Includes: Pipe (and anchors when applicable) MF-280 Base Shoe Pipe Column, 14' (4.3 m) 119.0 54.0 Each
7/8” dia.
(22.2mm) 5”
(127mm)
3/4”
(19.1mm)
” 6”
1 0 m) (152.4 mm)
m 4
(25
8”
(203.2 mm)
8”
(203.2 mm)
WB-BS
71 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 72
Application: Waveguide bridge WB-LB24-3 Waveguide Bridge Support Bracket, 16.0 7.3 Each
24" (0.6 m) wide for 3-1/2" (88.9 mm) OD legs
Size: 12" (0.3 m) and 24" (0.6 m) wide versions
Design: Side-mounted support for waveguide bridge
Feature: J-bolts for quick and easy installation of chan-
nel
Mounts to: 3-1/2" (88.9 mm) OD pipe
Material: Hot dip galvanized steel
Includes: Bracket and hardware
Order Separately: Additional accessories
waveguide
Ordering Information
four-post channel Part Number Description Wt. lb Wt. kg Kit Qty.
support bracket WB-CS24-3 Safety Grated Channel Support,
24" (0.6 m) wide for 3-1/2" (88.9 mm) OD pipe
18.0 8.2 Each
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 72
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 73
73 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 74
waveguide
Application: Waveguide bridge MF-511 Wall Support Angle, single or double 11.0 5.0 Each
Size: 26" wide
Design: Angle to support bridge to wall
Feature: Bolt-on wall attachment
Mounts to: All bridge channel types
Material: Hot dip galvanized steel
Includes: Angle
Order Separately: Wall mount anchors
3”
(76.2mm)
(66 26”
0.4
mm
)
9/16” dia.
(14.3mm)
3”
(76.2mm)
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 74
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 75
trapeze kits
Ordering Information
75 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 76
waveguide
vertical z-bracket Ordering Information
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 76
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 77
77 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 78
bridge channel
Application: Waveguide bridge
Size: 12" (304.8 mm) long
Design: Bolt-on splice plates
Feature: —
Mounts to: Safety grated waveguide bridge
Material: Hot dip galvanized steel
Includes: Splice and hardware
Order Separately: —
waveguide
adjustable splice for solid Ordering Information
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 78
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 79
grounding solutions
ground buss bar kits, 2" Ordering Information
App.: Grounding
2" x 10" Bare or Tinned Copper
Size: Three sizes
UGBKIT-0210 Ground Buss Bar Kit, 1/4" x 2" x 10" 5.4 2.45 Each
Design: Universal slotted or standard patterns for (6.4 mm x 50.8 mm x 254 mm)
1- or 2-hole lugs UGBKIT-0210-T Tinned Ground Buss Bar Kit, 1/4" x 2" x 10" 5.4 2.45 Each
(6.4 mm x 50.8 mm x 254 mm)
Feature: Multiple hole configurations
Mounts to: Wall or tower 2" x 12" Bare or Tinned Copper
Material: Copper or tinned copper UGBKIT-0212 Ground Buss Bar Kit, 1/4" x 2" x 12" 5.7 2.59 Each
(6.4 mm x 50.8 mm x 304.8 mm)
Incl.: Universal buss bar attachment kit
UGBKIT-0212-T Tinned Ground Buss Bar Kit, 1/4" x 2" x 12" 5.7 2.59 Each
Order Sep.: — (6.4 mm x 50.8 mm x 304.8 mm)
2’
grounding
(50.8mm)
UGBKIT-0210
1/2” 3/4”
(12.7mm) (19.1mm)
10”
(254mm)
grounding
7/16”
(11.1mm)
2”
(50.8mm)
UGBKIT-0212 1/2” 1”
(12.7mm) (25.4mm)
12”
(304.8mm)
2”
(50.8mm)
1/2” 3/4”
UGBKIT-0214 (12.7mm) (19.1mm)
14”
(355.6mm)
79 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 80
grounding solutions
ground buss bar kits, 2-1/2"
Ordering Information
App.: Grounding
2-1/2" x 12-1/2" Bare or Tinned Copper
Size: Two sizes
UGBKIT-2 Ground Buss Bar Kit, 5.7 2.59 Each
Design: Staggered pattern for 1- or 2-hole lugs 1/4" x 2-1/2" x 12-1/2"
(6.4 mm x 63.5 mm x 317.5 mm)
Feature: Multiple hole configurations
UGBKIT-2T Tinned Ground Buss Bar Kit, 5.7 2.59 Each
Mounts to: Wall or tower 1/4" x 2-1/2" x 12-1/2"
(6.4 mm x 63.5 mm x 317.5 mm)
Material: Copper or tinned copper
Incl.: Universal buss bar attachment kit 2-1/2" x 19-1/2" Bare or Tinned Copper
Order Sep.: — UGBKIT Ground Buss Bar Kit, 7.1 3.22 Each
1/4" x 2-1/2" x 19-1/2"
(6.4 mm x 63.5 mm x 495.3 mm)
UGBKIT-T Tinned Ground Buss Bar Kit, 7.1 3.22 Each
1/4" x 2-1/2" x 19-1/2"
(6.4 mm x 63.5 mm x 495.3 mm)
UGBKIT-2
grounding
UGBKIT
UGBKIT-0420
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 80
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 81
grounding solutions
ground buss bar kits, 4" Ordering Information
UGBKIT-0412
grounding
UGBKIT-0414
UGBKIT-0420
UGBKIT-0424
81 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 82
grounding solutions
arrestor trapeze kit Ordering Information
grounding
Part Number Description Wt. lb Wt. kg Kit Qty.
exothermic molds
Single Shot Exothermic Molds
App.: Grounding EX-1HET-6RG5 For #6 and #4 stranded wire and 2 0.91 Each
#4 and #3 solid wire.
Size: Three sizes
EX-1HET-2RG5 For #2 and #3 stranded wire and #1 and 2 0.91 Each
Design: Single use mold with weld metal #2 solid wire.
Feature: One-time connection between ground wire and EX-1HUT-2RG5 For #3 and #2 stranded wire and #2 and 7 3.18 Each
ground rod #1 solid wire.
EX-1HET EX-1HUT
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 82
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 83
grounding solutions
exothermic weld metal Ordering Information
Size: Three sizes EX-WM65-C Weld Metal, #65 3.3 1.50 Kit of 20
EX-WM90-C Weld Metal, #90 3.7 1.68 Kit of 10
Design: —
Feature: For use with reusable molds
Mounts to: Copper and steel
Material: —
Incl.: Weld metal
Order Sep.: Molds
83 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 84
grounding solutions
ground wire
Ordering Information
grounding
bulk ground lug kits Ordering Information
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 84
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 85
Application: Entry port solutions 204673-1 4" (102 mm) Feed-thru Entry Panel, 1 Port, 1 X 1 1 0.45 Each
204673-2A 4" (102 mm) Feed-thru Entry Panel, 2 Port, 1 X 2 2.3 1.0 Each
Size: Nine configurations
204673-4 4" (102 mm) Feed-thru Entry Panel, 4 Port, 1 X 4 3.5 1.59 Each
Design: Entry plates with round ports
204673-6 4" (102 mm) Feed-thru Entry Panel, 6 Port, 2 X 3 6.1 2.77 Each
Feature: Easy-to-install solution
204673-8 4" (102 mm) Feed-thru Entry Panel, 8 Port, 2 X 4 6.1 2.77 Each
Mounts to: Walls 204673-12 4" (102 mm) Feed-thru Entry Panel, 12 Port, 3 X 4 7 3.18 Each
Material: Aluminum 204673-16 4" (102 mm) Feed-thru Entry Panel, 16 Port, 4 X 4 9.1 4.13 Each
Includes: Port, caps, and mounting hardware 204673-18 4" (102 mm) Feed-thru Entry Panel, 18 Port, 3 X 6 13 5.90 Each
Order Separately: 4" (102 mm) boot assemblies
For additional entry ports please see our installation accessories bulletin #10211.
entry port
204673-1
85 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 86
Application: Entry port solutions 204679A-5 Boot Assembly Kit, 4" (102 mm) with 1 hole for 1.6 0.73 Each
1/2" corrugated foam coaxial cable
Size: Eight configurations
204679A-7 Boot Assembly Kit, 4" (102 mm) with 3 holes for 1.6 0.73 Each
Design: Compression boot kit for aluminum 1/2" corrugated foam coaxial cable
entry panels 204679A-2 Boot Assembly Kit, 4" (102 mm) with 1 hole for 1.6 0.73 Each
Feature: One-piece design simplifies installation 7/8" corrugated coaxial cable
204679A-18 Boot Assembly Kit, 4" (102 mm) with 2 holes for 1.6 0.73 Each
Mounts to: 4" (102 mm) entry panels 7/8" corrugated coaxial cable
Material: EPDM rubber 204679A-15 Boot Assembly Kit, 4" (102 mm) with 3 holes for 1.6 0.73 Each
7/8" corrugated coaxial cable
Includes: Boot, cushion, and two hose clamps
204679A-3 Boot Assembly Kit, 4" (102 mm) with 1 hole for 1.6 0.73 Each
Order Separately: 4" (102 mm) entry panel 1-1/4" corrugated coaxial cable
204679A-4 Boot Assembly Kit, 4" (102 mm) with 1 hole for 1.6 0.73 Each
1-5/8" corrugated coaxial cable
204679A-8 Boot Assembly Kit, 4" (102 mm) with 1 hole for 1.6 0.73 Each
2-1/4" corrugated coaxial cable
For additional boot assemblies please see our installation accessories bulletin #10211.
Application: Entry port solutions PLUG-12 Cushion Plug, 1/2" for unused cable boot holes 0.2 0.09 Kit of 5
Size: 1/2" to 1-5/8" coaxial cable PLUG-78 Cushion Plug, 7/8" for unused cable boot holes 0.2 0.09 Kit of 5
PLUG-114 Cushion Plug, 1-1/4" for unused cable boot holes 0.2 0.09 Kit of 5
Design: Plugs for unused cushion holes
PLUG-158 Cushion Plug, 1-5/8" for unused cable boot holes 0.2 0.09 Kit of 5
Feature: Allows for future expansion entry port
Mounts to: Cushion inserts
Material: EPDM rubber
Includes: Plugs
Order Separately: Cushion inserts or boot assemblies
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 86
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 87
Size: Eight versions RC-12 Rectangular Port Cushion with 6 holes for 0.6 0.27 Each
1/2" corrugated coaxial cable
Design: Compression fit rectangular cushion RC-12CR Rectangular Port Cushion with 6 holes for 0.6 0.27 Each
Feature: Dependable seal 1/2" smooth wall coaxial cable
RC-58 Rectangular Port Cushion with 4 holes for 0.6 0.27 Each
Mounts to: Entry panel
5/8" corrugated coaxial cable
Material: EPDM rubber RC-78 Rectangular Port Cushion with 4 holes for 0.6 0.27 Each
Includes: Cushion 7/8" corrugated coaxial cable
RC-78CR Rectangular Port Cushion with 4 holes for 0.6 0.27 Each
Order Separately: Entry panel 7/8" smooth wall coaxial cable
RC-114 Rectangular Port Cushion with 3 holes for 0.6 0.27 Each
1-1/4" corrugated coaxial cable
RC-158 Rectangular Port Cushion with 2 holes for 0.6 0.27 Each
1-5/8" corrugated coaxial cable
87 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 88
2”
-1/ )
(55 2 2 ” 35 2mm
9m (90
m)
Application: Entry port solutions MT-365G Roof-Top Hood Entry Kit 230 104.33 Each
2”
-1/
3
(85 3-3/ 48 .2m)
7.3 4” (1
mm
)
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 88
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 89
accessories
snapstak™, stackable Ordering Information
Application: Coaxial cable support SSH-78 SnapStak™, Stackable Snap-in Hanger for .92 .42 Kit of 10
7/8" corrugated cable
Size: 1/2" thru 1-5/8" coaxial cable
SSH-114 SnapStak™, Stackable Snap-in Hanger for 1.1 .52 Kit of 10
Design: Stackable snap-in hanger solution 1-1/4" corrugated cable
Feature: Simplifies coaxial cable installation SSH-158 SnapStak™, Stackable Snap-in Hanger for 1.3 .6 Kit of 10
1-5/8" corrugated cable
Mounts to: 3/4" (19.1 mm) holes
Material: Stainless steel For additional hangers please see our installation accessories bulletin #10211.
Includes: Hangers
Order Separately: Additional mounting accessories
Application: Coaxial cable support 31768A Angle Adapter with 3/8" tapped holes 4.9 2.2 Kit of 10
89 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 90
accessories
stand-off adapter kits
Ordering Information
Application: Coaxial cable support 30848-5 Stand-off Adapter Kit, 1" (25 mm) stand-off,
for 3/4" (20 mm) to 1 1/2" (40 mm) OD pipe 3.8 1.7 Kit of 10
Size: 3/8" tapped hole
30848-4 Stand-off Adapter Kit, 1" (25 mm) stand-off,
Design: Adapts hangers to round members for 1 1/2" (40 mm) to 3" (75 mm) OD pipe 3.8 1.7 Kit of 10
Feature: Provides 1" stand-off for 3/4" to 6" members 30848-1 Stand-off Adapter Kit, 1" (25 mm) stand-off,
for 3" (75 mm) to 4" (100 mm) OD pipe 4.0 1.8 Kit of 10
Mounts to: Round pipe
30848-2 Stand-off Adapter Kit, 1" (25 mm) stand-off,
Material: Stainless steel or galvanized for 4" (100 mm) to 5" (125 mm) OD pipe 4.1 1.9 Kit of 10
Includes: Adapter 30848-3 Stand-off Adapter Kit, 1" (25 mm) stand-off,
for 5" (125 mm) to 6" (150 mm) OD pipe 4.4 2.0 Kit of 10
Order Separately: Hose clamps
For additional adapters please see our installation accessories bulletin #10211.
Application: Coaxial cable support RM-A800 Round Member Adapter, 2"-10" OD 1.4 0.6 Kit of 10
(203.2 mm-254 mm OD)
Size: 1/2" (12.7 mm) wide
Design: Slotted hose clamp For additional accessories please see our installation accessories bulletin #10211.
Feature: Adapts hangers to round members
Mounts to: 2" to 10" (50.8 mm to 254 mm) OD
Material: Stainless steel
Includes: Hose clamps
Order Separately: Adapters
accessories
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 90
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 91
EQ-P-AL
Note: Equipment platforms in additional sizes available. Contact our Customer Support
Center for details.
EQ-P-DF
4”
(101.6mm)
1
(3. 0'
0m r 20' m)
) 15' o
10', m, or 6.1
, 4.6
14.50” Min. (368.3mm)
21.50” Max. (546.1mm) (3.0m
10.50” Min. (266.7mm)
17.50” Max. (444.5mm)
91 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 92
Design: — EQ-HR1015 Handrail Kit for 10' x 15' 886 401.9 Each
(3 m x 4.6 m) Equipment Platform
Feature: Easy-to-assemble bolt together designs EQ-HR1020 Handrail Kit for 10' x 20' 1066 483.6 Each
Mounts to: EQ series platform bases (3 m x 6.1m) Equipment Platform
EQ-PPC Two Post Power Telco Rack Kit for 262 118.9 Each
EQ-P Series Platforms
Post Bracket Kit for Waveguide Bridge Attachment to EQ-P Series Platforms
Size: 10' x 10' (3.0 m x 3.0 m), 10' x 15' EQ-P1015-DF Equipment Platform, 2610 1186.4 Each
(3.0 m x 4.6 m) or 10' x 20' (3.0 m x 6.1 m) 10' x 15' (3.0 m x 4.6 m)
base with sixteen displacement legs.
Design: Base platform with weight displacement legs
site related
Feature: Adjustable leg for roof-top applications EQ-P1020-DF Equipment Platform, 3506 1593.6 Each
10' x 20' (3.0 m x 6.1 m)
Mounts to: — base with twenty displacement legs.
Material: Hot dip galv steel
Includes: Frame, grating, legs and hardware
Order Separately: Additional legs if required
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 92
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 93
93 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 94
Part Number Description Wt. lb Wt. kg Kit Qty. Pre-Cut Plain End Pipe, Aluminum
MT-648 Plain End Pipe 2-3/8" OD x 24" 7 3.18 Each MT-656 Plain End Pipe 2-3/8" OD x 36" 3.8 1.72 Each
(60.3 mm OD x 0.6 m) (60.3 mm OD x 0.9 m)
MT-649 Plain End Pipe 2-3/8" OD x 36" 11 4.99 Each MT-657 Plain End Pipe 2-3/8" OD x 48" 5.1 2.31 Each
(60.3 mm OD x 0.9 m) (60.3 mm OD x 1.2 m)
MT-650 Plain End Pipe 2-3/8" OD x 48" 14 6.35 Each MT-658 Plain End Pipe 2-3/8" OD x 72" 7.6 3.45 Each
(60.3 mm OD x 1.2 m) (60.3 mm OD x 1.8 m)
MT-650-63 Plain End Pipe 2-3/8" OD x 63" 19 8.62 Each MT-541-96 Plain End Pipe 2-3/8" OD x 96" 8.6 3.90 Each
(60.3 mm OD x 1.6 m) (60.3 mm OD x 2.4 m)
MT-651 Plain End Pipe 2-3/8" OD x 72" 21 9.53 Each MT-541-126 Plain End Pipe 2-3/8" OD x 126" 9.6 4.35 Each
(60.3 mm OD x 1.8 m) (60.3 mm OD x 3.2 m)
MT-651-84 Plain End Pipe 2-3/8" OD x 84" 26 11.79 Each MT-541-150 Plain End Pipe 2-3/8" OD x 150" 10.6 4.81 Each
(60.3 mm OD x 2.1 m) (60.3 mm OD x 3.8 m)
MT-651-96 Plain End Pipe 2-3/8" OD x 96" 33.5 15.20 Each MT-659 Plain End Pipe 4-1/2" OD x 36" 11.3 5.13 Each
(60.3 mm OD x 2.4 m) (114.3 mm OD x 0.9 m)
MT-651-108 Plain End Pipe 2-3/8" OD x 108" 29 13.15 Each MT-660 Plain End Pipe 4-1/2" OD x 48" 15 6.80 Each
(60.3 mm OD x 2.7 m) (114.3 mm OD x 1.2 m)
MT-651-114 Plain End Pipe 2-3/8" OD x 114" 35.1 15.92 Each MT-661 Plain End Pipe 4-1/2" OD x 72" 22.4 10.16 Each
(60.3 mm OD x 2.9 m) (114.3 mm OD x 1.8 m)
(88.9 mm OD x 3.2 m) MT-528 Bulk Angle 2-1/2" x 2-1/2" x 1/4", 20' 82.5 37.42 Each
MT-547-174 Plain End Pipe 3-1/2" OD x 174" 132 59.88 Each (63.5 mm x 63.5 mm x 6.4 mm, 6 m)
(88.9 mm OD x 4.4 m) MT-529 Bulk Angle 3" x 3" x 3/16", 20' 74.5 33.79 Each
MT-547-192 Plain End Pipe 3-1/2" OD x 192" 163.4 74.12 Each (76.2 mm x 76.2 mm x 4.8 m, 6 m)
(88.9 mm OD x 4.9 m) MT-530 Bulk Angle 3" x 3" x 1/4", 20' 98.4 44.7 Each
MT-652 Plain End Pipe 4-1/2" OD x 36" 33.5 15.20 Each (76.2 mm x 76.2 mm x 6.4 mm, 6 m)
(114.3 mm OD x 0.9 m)
MT-653 Plain End Pipe 4-1/2" OD x 48" 44.3 20.09 Each Bulk Angle, Aluminum
(114.3 mm OD x 1.2 m)
MT-536 Bulk Angle 3" x 3" x 3/8", 25' 61.8 28.03 Each
MT-653-63 Plain End Pipe 4-1/2" OD x 63" 57 25.86 Each (76.2 mm x 76.2 mm x 9.5 mm, 7.6 m)
(114.3 mm OD x 1.6 m)
MT-654 Plain End Pipe 4-1/2" OD x 72" 66 29.94 Each
(114.3 mm OD x 1.8 m)
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 94
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 95
Design: 10' (3 m) and 20' (6.1 m) lengths MT-475 1-5/8" (41.3 mm) Single Galvanized 13 5.90 Each
Square Support Rail, 10' (3 m)
Feature: Versatile support solution
MT-476 1-5/8" (41.3 mm) Single Galvanized 26 11.79 Each
Mounts to: — Square Support Rail, 20' (6.1 m)
Material: Galvanized steel
Slotted Rail
Includes: Channel
MT-504 1-5/8" (41.3 mm) Slotted Galvanized 15 6.80 Each
Order Separately: Additional accessories Square Support Rail, 10' (3 m)
MT-505-240 1-5/8" (41.3 mm) Slotted Galvanized 30 13.61 Each
Square Support Rail, 20' (3 m)
95 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 96
Backing Plates
site related
Ordering Information
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 96
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 97
adjustable clamps
Ordering Information
electrical tape
Ordering Information
Ordering Information
colored electrical Part Number Description Wt. lb Wt. kg Kit Qty.
marking tape CM-TB Colored Electrical Marking Tape, blue,
3/4" x 66' (19.1 mm x 20.1 m) roll
0.3 0.14 Each
Ordering Information
3M scotchkote™
site related
97 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 98
Stainless Steel — Hex Head Bolts, Type 18-8 (order washer and nut separately)
Ordering Information
flat washers Part Number Description Kit Qty.
Galvanized
site related
Stainless Steel
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 98
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 99
Galvanized
Stainless Steel
Galvanized
Stainless Steel
Galvanized
site related
Stainless Steel
MT-373 3/8" x 12" Stainless Steel Threaded Rod 0.5 0.23 Each
MT-373-24 3/8" x 24" Stainless Steel Threaded Rod 1 0.45 Each
MT-374 3/8" x 36" Stainless Steel Threaded Rod 1.5 0.68 Each
MT-376 3/8" x 144" Stainless Steel Threaded Rod 6 2.72 Each
99 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 100
j-bolt assembly
Ordering Information
anchors
Ordering Information
self-drilling screws
Ordering Information
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 100
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 101
notes
101 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 102
engineering data
Where W = required ballast per tray (two trays per mount) in pounds
P = design wind pressure per UBC formula
A = area of one antenna (sq ft)
N = number of antennas
H = distance from center of antenna to roof surface (ft)
Where W = required ballast per tray (three trays per mount) in pounds
P = wind load of antenna (lb)
H = distance from center of antenna to roof surface (ft)
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 102
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 103
index by description
index by description section page index by description section page
3M Scotchkote™ Electrical Sealer SRC 97 Extension Kit for Roof-Top Coax Bridge Kits RT 51
Adjustable Splice for Roof-Top Coax Bridge Kits RT 50 GPS Antenna Wall Mount RT 48
Adjustable Splice for Solid Waveguide Bridge Channels WB 78 Ground Buss Bar 2" x 10" GD 79
Colored Electrical Marking Tape SRC 97 Ladder Tray, 90 Degree Horizontal Bends RT 56
Equipment Platforms for Raw Land Installations SRC 91 Non-Penetrating Roof Ballast Sled for Tripods RT 44
Equipment Platforms for Roof-top Installations SRC 92 Non-Penetrating Roof Frames RT 40, 41
Expansion Brackets for Access Tube WT 37, 66 Pipe Frame Stand-off Brackets TW 7
103 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 104
index by description
index by description section page index by description section page
Pipe Mount Taper Kit TW 13 Universal Adjustable Tapered Pipe Mount TW 14
Roof-Top Coax Bridge Kits RT 49 Universal Taper Pipe Mount Slider Brackets TW 15
Roof-Top Hood Entry Kit EP 87 Upper Support Rail Kits for Co-Location Platforms MO 33
Self Splicing, Coax Bridge Kits RT 49 Water Tower Coax Stand-off Brackets WT 65
Self-Drilling Screws SRC 100 Water Tower Hand Rail Antenna Mounts WT 65
Single Square Support Rails SRC 95 Water Tower Roof-Top Sector Frame Extensions WT 64
Splice Kit for Wall Coax Support Kits RT 53 Waveguide Bridge Channels, Solid WB 71
Splice Kits for Ladder Tray Sections RT 57 Waveguide Bridge Filler, 45 Degree WB 69
Splice Stiffener for Solid Waveguide Bridge Channel WB 77 Waveguide Bridge Filler, 90 Degree WB 69
Trapeze Kits WB 75
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 104
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 105
105 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 106
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 106
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 107
107 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 108
customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 108
16409_AndrewIntPgR3.qxp 9/21/06 9:02 AM Page 109
UGBKIT-0424 FX 81 WP-197 MO 31
UGBKIT-0424-T FX 81 WP-198 MO 31
UGBKIT-2 FX 80 WP-216 MO 32
UGBKIT-2T FX 80 WS-K400 WB 78
UGBKIT-T FX 80 WT-HRM2-126 WT 65
VC-GPSWM RT 48 WT-HRM2-96 WT 65
VC-WGSO-12 WT 65 WT-HRM2-B WT 65
VC-WGSO-2 WT 65 WT-MMP WT 62
VC-WGSO-4 WT 65 WT-RTA12-12-96 WT 63
VC-WGSO-7 WT 65 WT-RTA12-9-96 WT 63
WB-BS WB 71 WT-RTA14-12-96 WT 63
WB-CF45 WB 69 WT-RTA14-9-96 WT 63
WB-CF90 WB 69 WT-RTA6-96E WT 64
WB-CS24-3 WB 72 WT-RTA7-96E WT 64
WB-CY110 WB 70 WT-SMA12-3-96 WT 63
WB-CY210 WB 70 WT-SMA12-4-96 WT 63
WB-EXT WB 70 WT-SMA14-3-96 WT 63
WB-K110-B WB 68 WT-SMA14-4-96 WT 63
WB-K110-S WB 68 WT-SPM12-12-126 WT 61
WB-K210-B WB 68 WT-SPM12-12-72 WT 61
WB-K210-B15 WB 68 WT-SPM12-12-96 WT 61
WB-K210-B21 WB 68 WT-SPM12-9-126 WT 61
WB-K210-S WB 68 WT-SPM12-9-72 WT 61
WB-K410-B WB 68 WT-SPM12-9-96 WT 61
WB-K410-B15 WB 68 WT-SPM12-B WT 61
WB-K410-B21 WB 68 WT-SPM14-12-126 WT 61
WB-K410-S WB 68 WT-SPM14-12-72 WT 61
WB-LB12-3 WB 72 WT-SPM14-12-96 WT 61
WB-LB24-3 WB 72 WT-SPM14-9-126 WT 61
WB-SP WB 70 WT-SPM14-9-72 WT 61
109 customer service center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com
cover.qxd 9/21/06 9:17 AM Page 4
steel thicknesses
Gage Thickness (Inches) Thickness (mm)
10 0.1345 3.416
conversion factors
11 0.1196 3.038
12 0.1046 2.657 Convert From Convert To Multiply By
13 0.0897 2.278 Length
14 0.0747 1.897 foot (ft) meter (m) 0.3048
15 0.0673 1.709 inch (in) meter (m) 0.0254
16 0.0598 1.519 inch (in) centimeter (cm) 2.5400
meter (m) foot (ft) 3.2808
meter (m) inch (in) 39.3700
centimeter (cm) inch (in) 0.3937
millimeter (mm) inch (in) 0.0393
Area
square foot (ft2) square meter (m2) 0.0929
AWG wire sizes square meter (m ) 2
square foot (ft2) 10.7639