1. The approach of a manufacturing process in which unwanted extra material from
stock material is removed to get desired size/shape is a) Welding b) Casting c) Metal cutting d) Forming
Answer- c) Metal Cutting
2. Deformation based manufacturing process is preferred for
a) Low yield strength, low ductility metals b) High yield strength, high ductility metals c) Low yield strength, high ductility metals d) High yield strength, low ductility
Answer- c) Low yield strength, high ductility metals
3. Machining process suffers from
a) Internals defects b) Loss of metal worth c) Poor control over dimensions d) High rejection rate
Answer- b) Loss of metal worth
4. Welding is not preferred for
a) Large structural fabrication b) Joining dissimilar metal c) Highly reliable joint d) Joining mild steel
Answer- c) Highly reliable joint
5. Property of metal which is not important for casting process
a) Melting point b) Solidification temperature range c) Chemical affinity of gases with metal d) Yield strength
Answer- d) Yield strength
6. Solid state welding of a metal is not influenced by a) Yield strength b) Ductility c) Surface cleanliness d) Melting point
Answer- d) Melting point
7. Solidification temperature range of a metal during fusion welding does not affect a) Porosity b) Hot cracking c) Cold cracking d) Alloy segregation
Answer- c) Cold cracking
8. Classification of casting process based on the way metal is treated
a) Positive process b) Negative process c) Zero process d) Regenerative process
Answer- c) Zero Process
9. Manufacturing process based on altering the microstructure of workpiece to improve
the mechanical properties is a) Casting b) Forming c) Brazing d) Heat treatment
Answer- d) Heat treatment
10. An example of capital good is
a) Pen b) Steel plate c) Nut and bolts d) Lathe machine