Académique Documents
Professionnel Documents
Culture Documents
Chord-O-Mat 3 - Trigger Device: Chord-O-Mat 3 - Slave Device: Chord-O-Mat 3 - Push Loopback Device:
1 Introduction 20-24 working with the Slave Device 31-33 how to use the Push Loopback
2 Overview Device
_________________________________________________________
3 Settings
4 Scales & Root Note ____________________________________________
Chord-O-Mat 3 - Push / external Keyboard:
5 Chord Matrix
6-12 Chord-Slots 34 Troubleshooting
25-30 working with Push or an
13 Scale Correction
external Keyboard
14-17 Octave Designer
18 Modulation
19 Output Monitor
Have fun!
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Overview 2
1
on the top row of Chord-O-Mat you’ll
3 1 find the Settings
2
2 Here you can set the Root Note & the Scale
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Settings 3
On the top of Chord-O-Mat 3 you’ll find the Settings for the Chord-O-Mat 3 Device
Always on Top: the floating window will never hide This will show the Slave Device Control Panel
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Scales & Rootnote 4
You can Save everything to a *.json File on your Disk. To load the File you can go over the read button or simply drag the file on the Scale Section.
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Chord Matrix 5
This is the „Chord Matrix“ here will be displayed
all chords which fit into the selected scale.
Here you can trigger all chords with your mouse.
The „Chord Matrix“ gives you an Overview of the Chords that are in the selected Scale.
You can Trigger all chords with the Mouse and also with your Keyboard or Push, if „play all chords“
is selected.
The Chord Matrix is about to explore chords and have an Overview.
With the „Chordslots“ you can make a chord selection of max. 16 Chords to
play them via Keyboard, with Push or make Chord progressions with Clips.
These are the „Chord Slots“ here you can drag & drop a
chord from the Matrix to trigger it from your Keyboard or
from Push
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Chord Slots 6
The Chord Slots are here to make individual Chord Collections for every Scale
And to Trigger the Chords from a Keyboard or from Push.
If you dragged a Chord from the Matrix into a Chord Slot the Button on Push will
Get automatically mapped.
When you work with a Keyboard you have to learn an incoming Midi Note the the
Chord Slot
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Chord Slots - learn Midi Notes 1 7
To Trigger a Chord with a Keyboard or from your Clips, you have to learn a Midi Note to the Chord Slots:
1. Be sure that the Device is receiving Midi from your Keyboard check your Input routing in the Midi Track the Device is inside
2. Click on the “midi learn” button, if the Button blinks red, then hit the Key you want to assign.
Then the Key is mapped & you can trigger the Chord in this Chordslot
Another way to assign the Midi Notes is to click on the Button “midi mapping”. Here you can select “Standart Mapping” which assigns all Chord-Slots
To a Midi Note. This is recommended if you’re working with Push & the Push Loopback Device
1 2
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Chord Slots - re-arrange the Chords 9
You can easily move Chords from one Chordslot to another, just by drag & drop
1 2
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Chord Slots - Chord follow Root Note 10
If you change the Root Note, the chords in your Chords in the Chordslots will always follow the Rootnote.
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Chord Slots & Push 11
If there is a chord inside a slot, the Button on Push is highlighted and you can trigger the chord from there.
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Chord Slots - Master Trigger 12
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Scale Correction 13
if you have connected a Keyboard only the Notes that fit into the selected Scale
will be played. All other Notes will be muted (in Gated Mode) or will be pitched
To the Scale (pitched Mode)
min / max: here you can set the range of your Keyboard, Notes outside the range will be bypassed
Keyboard: shows the Notes which fit into the selected Scale
pitched / gated: if Pitched is selected all Notes that will not fit into the scale will be pitched to the Scale.
If Gated is selected all Notes that will not fit into the Scale will be bypassed
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Octave Designer 14
With the Octave Designer, you can add or remove Notes that will be played.
It shows also the Notes of the chord that is actually played
And you switch easily and fast between them with the 8 Presets.
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Octave Designer 15
...
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Octave Designer 16
Here the first Note (C) is duplicated and pitched one Octave lower
the first Note (F) is duplicated and pitched one Octave lower
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Octave Designer 17
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Modulation 18
here you can Modulate the Chord and make some Variations.
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Output Monitor 19
Velocity: this Parameter sets the Velocity, if you trigger a chord with the mouse. It has no function, if the chords are triggered with an
external Keyboard, Push or via Midiclips.
Mapped Notes: shows the Notes, that are mapped to the 16 Chord Slots
Input/Output/both: Shows the incoming Notes from the keyboard or Clips (Input) or the Notes of if you trigger a chord Chord (Output) or both.
Panic: hit Panic to kill all hanging Notes
Touchstrip is On: this button is activated, if you play with the Touchstrip on Push and the Output of the Triggered Chord is deactivated.
If you havn’t connected a Push and the Button is activaed, just click on it.
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Slave Devices 20
The Slave Devices are similar to the integrated „scale“ effect of Ableton Live, with
the difference, that you can control the harmony of your whole Liveset with the
Chord-O-Mat 3 Trigger Device and the Slave Devices.
You can place the Slave Device in any other Midi Track of your Live Project and
you can assign them to one of four Groups, which can be remote controlled from
the Chord-O-Mat Trigger Device.
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Slave Devices 21
If you click on the „Slaves“ Button, you see the Remote to control the four Slave Groups.
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Slave Devices 22
Mute: the Slave Track is Muted receive: the Slave Device plays the Track IN: the Slave Device receives
Chords of the Chord-O-Mat Midi from the Track and adapts
Trigger Device. The Scale to it
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Slave Devices 23
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Slave Devices 24
“To Chord” Feature: To learn a chord to the Slave Device, where the Midi Input or the Midi from your clips are processed,
Hit the “to chord” button, then play a chord. After this only the Notes from this chord will be played.
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Push / Keyboard 25
Connecting Push
If Push isnʼt regognised by the Device, hit rescan Show / hide Octaves & Slave remote control
1 4
2 Select if you want to use Push 1 or Push 2 5 Adjust the sensivity of the Pads for switching things, like
Octaves, Octave Designer and Slave Remote.
The Pads for triggering the Chords are not affected by this parameter
3 Shows what Device is connected 6 Unlock from Push (if you remove the Device, or turn it off, the Matrix
of Push didnʼt react anymore. You have to unlock the Device from
Push first)
1 2
4
6 3
5
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Push / Keyboard 26
To Trigger Chords from Push or a Keyboard, youʼll have two Trigger Chords with Push if „play all chords“ is OFF:
Modes.
1. „play all chords“ is ON: in this Mode all chords will be spread
over the Buttonmatrix of Push or over a Keyboard, and youʼre able
to play and explore the chords within your scale. If you hold a
chord on Push or your Keyboard in this mode and click with your
mouse on to a chord Slot it will be copied to this Slot.
2. „play the chords“ is OFF: Here you can trigger the Chord
inside the Chordslots. You can make a selection of 16 Chords per
Scale, that means every Scale has itʼs own preset for the chord
Slots.
In this Mode you can also control the Slaves, the Octaves and the
Octave Designer
One additional Note: you can play the last chord you triggered
also with the touch strip from Push. If you leave your finger
on the touch strip and you trigger a chord, it will be muted.
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Push / Keyboard 27
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Push / Keyboard 28
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Push / Keyboard 29
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Push / Keyboard 30
Mute
receive
Track IN
pitched
/ gated
Scale
OFF
Scale
chord
to chord
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Push - Loopback Device 31
Ok, if youʼre working with Push and you want to make Chord Progressions and record into a clip, there is indeed a problem.
With a connected Keyboard everything is working well, because Ableton Live receives the Midinotes from the Track Input, but if you Play over
Push, the Device receives the messages over the remote script from Push and not over the Track Input.
So, to solve this problem there is a Device inside the Package called „Push Loopback“. This Device just sends Midimessages to the Trackinput
where Chord-O-Mat 3 is. Please read this how to set up everything.
yes … this Device is more a crutch … but there was no way around that.
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Push - Loopback Device 32
1.) create a new Miditrack with 2.) route the Output of this 3.) Now Chord-O-Mat 3 will 4.) Be sure you have assigned the incomming
the Push Loopback Device Track to the Midi Track where communicate with the „Push Midinotes to the Chordslots, like you use it with a
inside. Then set the Input of Chord-O-Mat 3 is inside Loopback“ Device and the Keyboard.
this Track to „no input“ Device will send the It doesnʼt matter which Notes are mapped. You can use
Midimessages you have The same midi mapping as with your keyboard.
mapped inside the Chordslots If the Slots are not mapped the Device couldnʼt receive any
Message from Push!
to the Input of Chord-O-Mat 3
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Push - Loopback Device 33
http://www.soundmanufacture.net
Chord-O-Mat 3 Manual Trouble Shooting 34
No Midi Output:
• If you have no Midi Output from the Device, then check, if the “Touchstrip is on / Output is muted” Button is active.
If yes, then hit this Button or the Panic Button
• Push doesn’t react anymore: Please UNLOCK the Device from Push in the Settings menu, before you remove the
Device or turn it off
• Hanging Midinotes: hit the Panic Button
• No Output with the Push Loopback Device: 1. Check your routing 2. Be sure you have assigned the incomming Midinotes
in the Chordslots
http://www.soundmanufacture.net