Académique Documents
Professionnel Documents
Culture Documents
FILLET
CHAMFER
1. Press C, H and A keypad then Enter. Next, press D keypad and Enter. D for the
distance of the chamfer.
2. Specify the first chamfer distance.
3. Then, specify the second chamfer distance.
POLYGON
1. Press P, O and L keypad and Enter. Then insert any value for the number of side of
polygon.
2. Next, specify the centre of polygon at drawing space
3. Choose Inscribed in circle or Circumscribed about circle and press Enter.
4. Specify the radius of circle by typing a distance or clicking a point.
SCALE
1. Press S and C keypad and Enter. Select the chosen object and right click.
2. Next, specify base point by picking a point. Then, specify the scale factor and press
Enter.
3. To make a scale copy, repeat step 1-3. Then, press C keypad. Specify the scale factor
and press Enter.
MTEXT
PRINT
1. Insert PLOT and press enter
2. The paper size is ISO A4 (297X210mm)
3. Change from DWG to PDF
4. Click to fit to paper
5. Click to center the plot
6. Select window for what to plot
TASK (Create a title block)
Offset:
1. Insert TR
2. Press Enter
3. Right click to select the object to be trim
4. Left click to trim the object