Académique Documents
Professionnel Documents
Culture Documents
Tutorial 5
1. Using the method of joints, determine the force in each of the member of the truss
shown in Figure 1. State whether each member is in tension or compression.
[4 marks]
Figure 1
2. Using the method of joints, determine the force in each of the member of the truss
shown in Figure 2. State whether each member is in tension or compression.
[4 marks]
Figure 2
3. Determine the force in each member of the half tip truss shown in Figure 3 using
the method of joints. State whether each member is in tension or compression.
[4 marks]
Figure 3
4. (a) Using the method of sections, determine the forces inside members ED, AD
and AB in Figure 4(a) below and state whether each member is in tension or
compression. [6 marks]
Figure 4(a)
(b) Compute the forces inside members ED and DB in Figure 4(b) using the
method of sections if P = 800 N. State if the members are in tension or
compression. [4 marks]
Figure 4(b)
5. Find the force in member BD and the reaction (magnitude and the direction) at C
of the frame as shown in Figure 5. [8 marks]
310 N A
30o B
r = 1.4m
1.92 m
C
0.56 m
Figure 5
ANSWERS
4.(a) FED = 1200 N (tension), FAD = 1250 N(compression), FAB = 200 N(compression)