Académique Documents
Professionnel Documents
Culture Documents
temperature controlled
B-B Microfilter-
activated carbon
combination
Air exhaust fan Air exhaust fan
Air exhaust fan temperature controlled temperature controlled
temperature controlled
Air main
Pressure charging
line system
Louvre for Incoming air Condensate
package controlled with
weather protective lattice line
3200
2705
1700
1700
1540
1500
Refrigeration
including storage, treatment and dissemination by use of electronic systems must not be made for any other than the agreed
Screw
Drawings remain our exclusive property. They are entrusted only for the agreed purpose. Copies or any other reproduction,
compressor dryer
B 7 8
* 6
200
3 5
4 To the
mains
600
2 4
1250
Screw 1
1795
compressor 10
Air Öl
receiver Condensate line
Wasser
Legend
1590
Condensate
treatment unit 1 Screw compressor
AQUAMAT
2 Hose line
3 Ball valve
* Bypass lines should
not be fitted on standby units
or when 100 % compressed air
4 Air receiver tank quality is required.
5 Refrigeration dryer
6 Micofilter Activated Carbon combination The requirements of items 4 should
410
1210
7 Air main charging system be chosen according operating conditions.
Die Zeichnung bleibt unser ausschließliches Eigentum. Sie wird nur zu dem vereinbarten Zweck anvertraut und darf zu keinem
1480 500
Air entrance Air entrance Microfilter-
Incomming Incomming Condensate
Compressed aperture m² Minimum air Refrigeration- Compressed aperture m² activated Compressed
Compressor- air volume Air exhaust ECO- air volume treatment
air free cross receiver dryer model air free cross carbon air
model m³/ h per fan m³/ h DRAIN m³/ h per unit
connection section per capacity l ** connection section per combination connection
unit unit AQUAMAT
unit unit model
BSD 65 G 1 1/2 1,3 11340 11000 2000 13 TD 61 G 1 1/2 0,45 3500 FFG 71- D R 1 1/2 CF 19
Louvre for Incoming air
1060
BSD 75 G 1 1/2 1,7 14420 14000 2000 13 TD 76 G2 0,45 3500 FFG 71- D R 1 1/2 CF 19
package controlled with BSD 83 G 1 1/2 2,5 17490 17000 3000 13 TE 91 G2 0,5 4500 FFG 107- D R 1 1/2 CF 19
purpose. Neither originals nor reproductions may be given to or made available to third parties.
Die Zeichnung bleibt unser ausschließliches Eigentum. Sie wird nur zu dem vereinbarten Zweck anvertraut und darf zu keinem
anderen Zweck verwendet werden. Kopien oder sonstige Vervielfältigungen einschließlich Speicherung, Verarbeitung oder
Verbreitung unter Verwendung elektronischer Systeme dürfen nur zu dem vereinbarten Zweck angefertigt werden. Weder
Original noch Vervielfältigungen dürfen Dritten ausgehändigt oder in sonstiger Weise zugänglich gemacht werden.
2705
1700
1700
1540
1500
Refrigeration
including storage, treatment and dissemination by use of electronic systems must not be made for any other than the agreed
Screw
Drawings remain our exclusive property. They are entrusted only for the agreed purpose. Copies or any other reproduction,
compressor dryer
B 7 8
* 6
200
3 5
4 To the
mains
600
2 4
1250
1
1795
10
Air Öl
receiver Condensate line
Wasser
Legend
1590
Condensate
treatment unit 1 Screw compressor
AQUAMAT
2 Hose line
3 Ball valve
* Bypass lines should
not be fitted on standby units
or when 100 % compressed air
4 Air receiver tank quality is required.
5 Refrigeration dryer
Screw 6 Micofilter Activated Carbon combination The requirements of items 4 should
410
1210
7 Air main charging system be chosen according operating conditions.
Die Zeichnung bleibt unser ausschließliches Eigentum. Sie wird nur zu dem vereinbarten Zweck anvertraut und darf zu keinem
Recirculating air louvre 1480 500 Air entrance Air entrance Microfilter-
thermostatically controlled Incomming Air exhaust Incomming Condensate
Compressed aperture m² Minimum air Refrigeration- Compressed aperture m² activated Compressed
Compressor- air volume duct ECO- air volume treatment
air free cross receiver dryer model air free cross carbon air
model m³/ h per dimensions DRAIN m³/ h per unit
connection section per capacity l ** connection section per combination connection
unit m² unit AQUAMAT
unit unit model
BSD 65 G 1 1/2 0,8 6840 0,49 2000 13 TD 61 G 1 1/2 0,45 3500 FFG 71- D R 1 1/2 CF 19
BSD 75 G 1 1/2 1 8420 0,49 3000 13 TD 76 G2 0,45 3500 FFG 71- D R 1 1/2 CF 19
1060
BSD 83 G 1 1/2 1,2 8490 0,49 3000 13 TE 91 G2 0,5 4500 FFG 107- D R 1 1/2 CF 19
purpose. Neither originals nor reproductions may be given to or made available to third parties.
Die Zeichnung bleibt unser ausschließliches Eigentum. Sie wird nur zu dem vereinbarten Zweck anvertraut und darf zu keinem
anderen Zweck verwendet werden. Kopien oder sonstige Vervielfältigungen einschließlich Speicherung, Verarbeitung oder
Verbreitung unter Verwendung elektronischer Systeme dürfen nur zu dem vereinbarten Zweck angefertigt werden. Weder
Original noch Vervielfältigungen dürfen Dritten ausgehändigt oder in sonstiger Weise zugänglich gemacht werden.
2705
1700
1700
1540
1540
Screw Screw Refrigeration Condensate Screw Refrigeration
compressor compressor dryer treatment unit compressor dryer
including storage, treatment and dissemination by use of electronic systems must not be made for any other than the agreed
AQUAMAT
Drawings remain our exclusive property. They are entrusted only for the agreed purpose. Copies or any other reproduction,
Control line
11 * 6
purpose. Neither originals nor reproductions may be given to or made available to third parties.
3 5 7 8
2
4 To the
1 4
* mains
6020 6
200
B
600
1
10
Air
1250
1795
receiver Öl
Condensate line
1590
Legend Wasser
1
2
Screw compressor
Hose line
7
8
Air main charging system
Hose coupling * Bypass lines should
not be fitted on standby units
410
1350
treatment unit
Verbreitung unter Verwendung elektronischer Systeme dürfen nur zu dem vereinbarten Zweck angefertigt werden. Weder
AQUAMAT
1060
Original noch Vervielfältigungen dürfen Dritten ausgehändigt oder in sonstiger Weise zugänglich gemacht werden.
dryer unit
unit
unit
unit
model
AQUAMAT
BSD 65 G 1 1/2 1,3 11340 22000 2000 13 TD 61 G 1 1/2 0,45 3500 FFG 71- D R 1 1/2 CF 19
BSD 75 G 1 1/2 1,7 14420 28000 2000 13 TD 76 G2 0,45 3500 FFG 71- D R 1 1/2 CF 19
BSD 83 G 1 1/2 2,5 17490 34000 3000 13 TE 91 G2 0,5 4500 FFG 107- D R 1 1/2 CF 19
1060
purpose. Neither originals nor reproductions may be given to or made available to third parties.
Die Zeichnung bleibt unser ausschließliches Eigentum. Sie wird nur zu dem vereinbarten Zweck anvertraut und darf zu keinem
anderen Zweck verwendet werden. Kopien oder sonstige Vervielfältigungen einschließlich Speicherung, Verarbeitung oder
Verbreitung unter Verwendung elektronischer Systeme dürfen nur zu dem vereinbarten Zweck angefertigt werden. Weder
Original noch Vervielfältigungen dürfen Dritten ausgehändigt oder in sonstiger Weise zugänglich gemacht werden.
3200
2705
1700
1700
1540
Screw Screw Refrigeration Condensate Screw Refrigeration Refrigeration
compressor compressor dryer treatment unit compressor dryer dryer
including storage, treatment and dissemination by use of electronic systems must not be made for any other than the agreed
AQUAMAT
Drawings remain our exclusive property. They are entrusted only for the agreed purpose. Copies or any other reproduction,
Control line
6020 11 * 6
purpose. Neither originals nor reproductions may be given to or made available to third parties.
B 4 To the
200
1 4
* mains
6
600
Air 5
1250
receiver 3 9
2
1590
1350
1
Screw Screw 10
compressor compressor
Condensate Öl
Recirculating air louvre treatment unit Condensate line
6520
1
2
Screw compressor
Hose line
7
8
Air main charging system
Hose coupling * Bypass lines should
not be fitted on standby units
3 Ball valve 9 Automatic condensate drain or when 100 % compressed air
Refrigeration 4 Air receiver tank 10 Condensate Treatmente unit quality is required.
5 Refrigeration dryer 11 Controller
800
1060
dryer unit
unit mm
unit
unit
model
AQUAMAT
Microfilter- BSD 65 G 1 1/2 0,8 6840 0,49 2000 13 TD 61 G 1 1/2 0,45 3500 FFG 71- D R 1 1/2 CF 19
activated carbon BSD 75 G 1 1/2 1 8420 0,49 2000 13 TD 76 G2 0,45 3500 FFG 71- D R 1 1/2 CF 19
A To the A combination BSD 83 G 1 1/2 1,2 8490 0,49 3000 13 TE 91 G2 0,5 4500 FFG 107- D R 1 1/2 CF 19
B ATTENTION!
Minimum width of door is total mains ** Designed for reference terms This drawing also contains work to be done on site. The regulations of EN 1012 & VDE 0100 have to be
width of unit + 100 mm DIN/ ISO 7183 Option A observed; the requirements of existing operational safety ordinance and the manuals have to be considered
1480 500 Air main by the operator and the employer respectively at the place of installation.
charging The national safety and accident prevention regulations have to be observed.
system The installation of a sub- assembly in terms of the pressure equipment directive 97/23/EC has to be carried
out according to this directive.
P+I Scale Date Name
X
Condensate lines have to be connected Inst. 1:50 Drawn 15.07.2013 Langgu1
to a collecting line via swan neck or are Design limits for X Checked 15.07.2013 Ernst
ambient temperature
to be fed to the oil/water separator
min.: + 3° C
Name Sample layout sketch Plan No.
separately. A pressure-less drain has
max.: + 40° C 2x BSD with exhaust duct LYMU0001101d
to be provided for.
Page 1 of 2
We reserve the right to make changes in the course of developement. This drawing can only be modified with CAD
including storage, treatment and dissemination by use of electronic systems must not be made for any other than the agreed
Drawings remain our exclusive property. They are entrusted only for the agreed purpose. Copies or any other reproduction,
purpose. Neither originals nor reproductions may be given to or made available to third parties.
Die Zeichnung bleibt unser ausschließliches Eigentum. Sie wird nur zu dem vereinbarten Zweck anvertraut und darf zu keinem
anderen Zweck verwendet werden. Kopien oder sonstige Vervielfältigungen einschließlich Speicherung, Verarbeitung oder
Verbreitung unter Verwendung elektronischer Systeme dürfen nur zu dem vereinbarten Zweck angefertigt werden. Weder
Original noch Vervielfältigungen dürfen Dritten ausgehändigt oder in sonstiger Weise zugänglich gemacht werden.
Drawings remain our exclusive property. They are entrusted only for the agreed purpose. Copies or any other reproduction, including storage, treatment and dissemination by use
ambient temperature
of electronic systems must not be made for any other than the agreed purpose. Neither originals nor reproductions may be given to or made available to third parties.
Section A-A Section B-B min.:
max.:
+ 3° C
+ 40° C
Air exhaust fan
thermostatically
controlled
Microfilter-
activated carbon Air Air main
Louvre for incoming air combination receiver charging
Microfilter- To the
package controlled with activated carbon system
weather protective lattice mains
combination
3500
Screw Pressure
2390
compressor Air line
receiver
1700
Condensate
line
Screw
compressor
5
7 8
To the
2
3 mains
6
Legend
1 Screw compressor with integrated refrigeration dryer
4 2 Hose line
800 1020 250 3
4
Ball valve
Microfilter- activated carbon combination
5 Pressure transducer
sonstige Vervielfältigungen einschließlich Speicherung, Verarbeitung oder Verbreitung unter Verwendung elektronischer Systeme dürfen nur zu dem vereinbarten Zweck angefertigt
B
1
Die Zeichnung bleibt unser ausschließliches Eigentum. Sie wird nur zu dem vereinbarten Zweck anvertraut und darf zu keinem anderen Zweck verwendet werden. Kopien oder
130
Oil
Condensate line
Water
600
400
Microfilter-
activated carbon
1200
combination Air entrance Microfilter-
Condensate
werden. Weder Original noch Vervielfältigungen dürfen Dritten ausgehändigt oder in sonstiger Weise zugänglich gemacht werden.
O 1150
BSD 65 T G 1 1/2 1,3 13340 13000 2000 13 FFG- 71 D R 1 1/2 CF- 19
Air
receiver
4000 BSD 75 T
BSD 83 T
G 1 1/2
G 1 1/2
1,7
2,2
16420
17490
16000
17000
2000
3000
13
13
FFG- 71 D
FFG- 107 D
R 1 1/2
R 1 1/2
CF- 19
CF- 19
Louvre for incoming air This drawing also contains work to be done on site. The regulations of EN 1012 & VDE 0100 have to be
package controlled with Air main observed; the requirements of existing operational safety ordinance and the manuals have to be considered
weather protective lattice charging by the operator and the employer respectively at the place of installation.
system The national safety and accident prevention regulations have to be observed.
The installation of a sub- assembly in terms of the pressure equipment directive 97/23/EC has to be carried
out according to this directive.
P+I Scale Date Name
A
X
1:50
ATTENTION! A Condensate lines have to be connected
to a collecting line via swan neck or are
Inst.
DIN A3
Drawn 22.04.2013 blinzler1
to be provided for.
Safety codes on site have to be 1x BSD T with exhaust air fan LYMU0001604e
paid attention to. Page 1 of 2
We reserve the right to make changes in the course of developement. This drawing can only be modified with CAD
1:20 Design limits for
ambient temperature
min.: + 3° C
max.: + 40° C
Drawings remain our exclusive property. They are entrusted only for the agreed purpose. Copies or any other reproduction, including storage, treatment and dissemination by use
of electronic systems must not be made for any other than the agreed purpose. Neither originals nor reproductions may be given to or made available to third parties.
sonstige Vervielfältigungen einschließlich Speicherung, Verarbeitung oder Verbreitung unter Verwendung elektronischer Systeme dürfen nur zu dem vereinbarten Zweck angefertigt
Die Zeichnung bleibt unser ausschließliches Eigentum. Sie wird nur zu dem vereinbarten Zweck anvertraut und darf zu keinem anderen Zweck verwendet werden. Kopien oder
werden. Weder Original noch Vervielfältigungen dürfen Dritten ausgehändigt oder in sonstiger Weise zugänglich gemacht werden.
This drawing also contains work to be done on site. The regulations of EN 1012 & VDE 0100 have to be
observed; the requirements of existing operational safety ordinance and the manuals have to be considered
by the operator and the employer respectively at the place of installation.
The national safety and accident prevention regulations have to be observed.
The installation of a sub- assembly in terms of the pressure equipment directive 97/23/EC has to be carried
out according to this directive.
P+I Scale Date Name
Safety codes on site have to be Condensate lines have to be connected X
1:50 Drawn 22.04.2013 blinzler1
paid attention to. to a collecting line via swan neck or are Inst.
to be fed to the condensate treatment unit Template Rev. 02.03.2011 X DIN A2 Checked 22.04.2013 Ernst
separately. A pressure-less drain has Description Sample layout sketch Plan No.
ATTENTION! to be provided for. 1x BSD T with exhaust air fan LYMU0001604e
Minimum width of door is total width of unit + 100 mm Page 2 of 2
We reserve the right to make changes in the course of developement. This drawing can only be modified with CAD
Design limits for
Drawings remain our exclusive property. They are entrusted only for the agreed purpose. Copies or any other reproduction, including storage, treatment and dissemination by use
ambient temperature
min.: + 3° C
of electronic systems must not be made for any other than the agreed purpose. Neither originals nor reproductions may be given to or made available to third parties. Section A-A Section B-B max.: + 40° C
Air exhaust fan
thermostatically
controlled
Microfilter-
activated carbon Microfilter-
combination activated carbon
combination To the
Louvre for incoming air mains
package controlled with
3500
weather protective lattice
Pressure
Screw Screw line
2390
compressor compressor Air
receiver SAM
1700
Condensate
line Condensate
treatment unit
AQUAMAT Screw
compressor
Control line
10
i
5 8
p 7
To the
2 3 mains
6
50
3 Ball valve
4 Microfilter- activated carbon combination
5 Pressure transducer
6 Air receiver tank
sonstige Vervielfältigungen einschließlich Speicherung, Verarbeitung oder Verbreitung unter Verwendung elektronischer Systeme dürfen nur zu dem vereinbarten Zweck angefertigt
520
Die Zeichnung bleibt unser ausschließliches Eigentum. Sie wird nur zu dem vereinbarten Zweck anvertraut und darf zu keinem anderen Zweck verwendet werden. Kopien oder
1200
4
1
Screw Screw 9
compressor compressor Air Oil
1990
O 1150
Condensate line
receiver Water
4000
werden. Weder Original noch Vervielfältigungen dürfen Dritten ausgehändigt oder in sonstiger Weise zugänglich gemacht werden.
This drawing also contains work to be done on site. The regulations of EN 1012 & VDE 0100 have to be
observed; the requirements of existing operational safety ordinance and the manuals have to be considered
SAM by the operator and the employer respectively at the place of installation.
The national safety and accident prevention regulations have to be observed.
A ATTENTION!
A The installation of a sub- assembly in terms of the pressure equipment directive 97/23/EC has to be carried
out according to this directive.
B Minimum width of door is total width of unit + 100 mm
P+I Scale Date Name
6000 X
Inst.
1:50 Drawn 26.04.2013 blinzler1
Template Rev. 02.03.2011 X DIN A3 Checked 26.04.2013 Ernst
Safety codes on site have to be Condensate lines have to be connected
paid attention to. to a collecting line via swan neck or are Description Sample layout sketch Plan No.
to be fed to the condensate treatment unit
separately. A pressure-less drain has 2x BSD T with exhaust air fan LYMU0001804e
to be provided for. Page 1 of 2
We reserve the right to make changes in the course of developement. This drawing can only be modified with CAD
Design limits for
1:20 ambient temperature
min.: + 3° C
max.: + 40° C
Drawings remain our exclusive property. They are entrusted only for the agreed purpose. Copies or any other reproduction, including storage, treatment and dissemination by use
of electronic systems must not be made for any other than the agreed purpose. Neither originals nor reproductions may be given to or made available to third parties.
sonstige Vervielfältigungen einschließlich Speicherung, Verarbeitung oder Verbreitung unter Verwendung elektronischer Systeme dürfen nur zu dem vereinbarten Zweck angefertigt
Die Zeichnung bleibt unser ausschließliches Eigentum. Sie wird nur zu dem vereinbarten Zweck anvertraut und darf zu keinem anderen Zweck verwendet werden. Kopien oder
werden. Weder Original noch Vervielfältigungen dürfen Dritten ausgehändigt oder in sonstiger Weise zugänglich gemacht werden.
This drawing also contains work to be done on site. The regulations of EN 1012 & VDE 0100 have to be
observed; the requirements of existing operational safety ordinance and the manuals have to be considered
by the operator and the employer respectively at the place of installation.
The national safety and accident prevention regulations have to be observed.
The installation of a sub- assembly in terms of the pressure equipment directive 97/23/EC has to be carried
out according to this directive.
Safety codes on site have to be Condensate lines have to be connected P+I Scale Date Name
paid attention to. to a collecting line via swan neck or are X
Inst.
1:50 Drawn 26.04.2013 blinzler1
to be fed to the condensate treatment unit Template Rev. 02.03.2011 X DIN A2 Checked 26.04.2013 Ernst
ATTENTION! separately. A pressure-less drain has Description Sample layout sketch Plan No.
Minimum width of door is total width of unit + 100 mm to be provided for. 2x BSD T with exhaust air fan LYMU0001804e
Page 2 of 2
We reserve the right to make changes in the course of developement. This drawing can only be modified with CAD
Design limits for
Drawings remain our exclusive property. They are entrusted only for the agreed purpose. Copies or any other reproduction, including storage, treatment and dissemination by use
Louvre for outgoing air ambient temperature
of electronic systems must not be made for any other than the agreed purpose. Neither originals nor reproductions may be given to or made available to third parties.
Section A-A thermostatically controlled
with weather protective lattice Section B-B Recirculating air louvre
thermostatically controlled
min.:
max.:
+ 3° C
+ 40° C
3500
weather protective lattice
ehermostatically controlled
Screw Pressure
2390
compressor Air line
receiver
1700
Condensate
line
5
7 8
To the
2
3 mains
6
Legend
1 Screw compressor with integrated refrigeration dryer
800 1020 250 4 2
3
Hose line
Ball valve
4 Microfilter- activated carbon combination
5 Pressure transducer
594 120
sonstige Vervielfältigungen einschließlich Speicherung, Verarbeitung oder Verbreitung unter Verwendung elektronischer Systeme dürfen nur zu dem vereinbarten Zweck angefertigt
1 6 Air receiver
130
9 Condensate treatment unit
Oil
Condensate line
Water
600
400
Microfilter- Condensate
1200
activated carbon treatment unit
combination AQUAMAT Air entrance Permissible Microfilter-
werden. Weder Original noch Vervielfältigungen dürfen Dritten ausgehändigt oder in sonstiger Weise zugänglich gemacht werden.
Condensate
Compressed aperture m² Incoming air overall pressure Exhaust air Minimum air activated Compressed
Compressor- Air exhaust treatment
air free cross volume m³/h loss for fan for each receiver ECO- DRAIN carbon air
model duct m² unit
connection section per per unit exhaust air dryer m³/h capacity l combination connection
Air AQUAMAT
1990
Louvre for incoming air This drawing also contains work to be done on site. The regulations of EN 1012 & VDE 0100 have to be
Air main observed; the requirements of existing operational safety ordinance and the manuals have to be considered
package controlled with Screw charging
weather protective lattice compressor by the operator and the employer respectively at the place of installation.
system The national safety and accident prevention regulations have to be observed.
The installation of a sub- assembly in terms of the pressure equipment directive 97/23/EC has to be carried
out according to this directive.
P+I Scale Date Name
A A Safety codes on site have to be
paid attention to.
X
Inst.
1:50 Drawn 22.04.2013 blinzler1
ATTENTION! X DIN A3 Checked 22.04.2013 Ernst
B Minimum width of door is total width of unit + 100 mm Condensate lines have to be connected
Template Rev. 02.03.2011
to a collecting line via swan neck or are Description Sample layout sketch Plan No.
4500 to be fed to the condensate treatment unit
separately. A pressure-less drain has 1x BSD T with exhaust air duct LYMU0001703e
to be provided for.
Page 1 of 2
We reserve the right to make changes in the course of developement. This drawing can only be modified with CAD
Design limits for
1:20 ambient temperature
min.: + 3° C
max.: + 40° C
Drawings remain our exclusive property. They are entrusted only for the agreed purpose. Copies or any other reproduction, including storage, treatment and dissemination by use
of electronic systems must not be made for any other than the agreed purpose. Neither originals nor reproductions may be given to or made available to third parties.
sonstige Vervielfältigungen einschließlich Speicherung, Verarbeitung oder Verbreitung unter Verwendung elektronischer Systeme dürfen nur zu dem vereinbarten Zweck angefertigt
Die Zeichnung bleibt unser ausschließliches Eigentum. Sie wird nur zu dem vereinbarten Zweck anvertraut und darf zu keinem anderen Zweck verwendet werden. Kopien oder
werden. Weder Original noch Vervielfältigungen dürfen Dritten ausgehändigt oder in sonstiger Weise zugänglich gemacht werden.
This drawing also contains work to be done on site. The regulations of EN 1012 & VDE 0100 have to be
observed; the requirements of existing operational safety ordinance and the manuals have to be considered
by the operator and the employer respectively at the place of installation.
The national safety and accident prevention regulations have to be observed.
The installation of a sub- assembly in terms of the pressure equipment directive 97/23/EC has to be carried
out according to this directive.
Safety codes on site have to be Condensate lines have to be connected P+I Scale Date Name
paid attention to. to a collecting line via swan neck or are X
Inst.
1:50 Drawn 22.04.2013 blinzler1
to be fed to the condensate treatment unit Template Rev. 02.03.2011 X DIN A2 Checked 22.04.2013 Ernst
ATTENTION! separately. A pressure-less drain has Description Sample layout sketch Plan No.
Minimum width of door is total width of unit + 100 mm to be provided for. 1x BSD T with exhaust air duct LYMU0001703e
Page 2 of 2
We reserve the right to make changes in the course of developement. This drawing can only be modified with CAD
Design limits for
Drawings remain our exclusive property. They are entrusted only for the agreed purpose. Copies or any other reproduction, including storage, treatment and dissemination by use
ambient temperature
Louvre for outgoing air min.: + 3° C
of electronic systems must not be made for any other than the agreed purpose. Neither originals nor reproductions may be given to or made available to third parties.
Recirculating air louvre
Section A-A thermostatically controlled
with weather protective lattice
Section B-B thermostatically controlled
max.: + 40° C
Microfilter-
activated carbon
combination Air exhaust fan Microfilter-
thermostatically activated carbon To the
controlled combination mains
Louvre for incoming air
package controlled with Screw
3500
weather protective lattice compressor
Pressure
line
2390
Air
receiver SAM
1700
Condensate
line Condensate
treatment unit
AQUAMAT Screw
compressor
Control line
10
i
5 8
p 7
To the
2 3 mains
6
50
3 Ball valve
4 Microfilter- activated carbon combination
5 Pressure transducer
6 Air receiver tank
sonstige Vervielfältigungen einschließlich Speicherung, Verarbeitung oder Verbreitung unter Verwendung elektronischer Systeme dürfen nur zu dem vereinbarten Zweck angefertigt
520
Die Zeichnung bleibt unser ausschließliches Eigentum. Sie wird nur zu dem vereinbarten Zweck anvertraut und darf zu keinem anderen Zweck verwendet werden. Kopien oder
1200
4
1
9
Air Oil
1991
O 1150
Condensate line
receiver Water
4000
werden. Weder Original noch Vervielfältigungen dürfen Dritten ausgehändigt oder in sonstiger Weise zugänglich gemacht werden.
compressor compressorAir main BSD 65 T G 1 1/2 0,9 9240 0,49 60 2400 2000 13 FFG- 71 D R 1 1/2 CF- 38
BSD 75 T G 1 1/2 1,1 10820 0,49 60 2400 2000 13 FFG- 71 D R 1 1/2 CF- 38
charging BSD 83 T G 1 1/2 1,4 10890 0,49 60 2400 3000 13 FFG- 107 D R 1 1/2 CF- 38
system
This drawing also contains work to be done on site. The regulations of EN 1012 & VDE 0100 have to be
observed; the requirements of existing operational safety ordinance and the manuals have to be considered
SAM by the operator and the employer respectively at the place of installation.
The national safety and accident prevention regulations have to be observed.
A ATTENTION!
A The installation of a sub- assembly in terms of the pressure equipment directive 97/23/EC has to be carried
out according to this directive.
B Minimum width of door is total width of unit + 100 mm
P+I Scale Date Name
6000 X
Inst.
1:50 Drawn 26.04.2013 blinzler1
Template Rev. 02.03.2011 X DIN A3 Checked 26.04.2013 Ernst
Safety codes on site have to be Condensate lines have to be connected
paid attention to. to a collecting line via swan neck or are Description Sample layout sketch Plan No.
to be fed to the condensate treatment unit
separately. A pressure-less drain has 2x BSD T with exhaust air duct LYMU0001903e
to be provided for. Page 1 of 2
We reserve the right to make changes in the course of developement. This drawing can only be modified with CAD
Design limits for
1:20 ambient temperature
min.: + 3° C
max.: + 40° C
Drawings remain our exclusive property. They are entrusted only for the agreed purpose. Copies or any other reproduction, including storage, treatment and dissemination by use
of electronic systems must not be made for any other than the agreed purpose. Neither originals nor reproductions may be given to or made available to third parties.
sonstige Vervielfältigungen einschließlich Speicherung, Verarbeitung oder Verbreitung unter Verwendung elektronischer Systeme dürfen nur zu dem vereinbarten Zweck angefertigt
Die Zeichnung bleibt unser ausschließliches Eigentum. Sie wird nur zu dem vereinbarten Zweck anvertraut und darf zu keinem anderen Zweck verwendet werden. Kopien oder
werden. Weder Original noch Vervielfältigungen dürfen Dritten ausgehändigt oder in sonstiger Weise zugänglich gemacht werden.
This drawing also contains work to be done on site. The regulations of EN 1012 & VDE 0100 have to be
observed; the requirements of existing operational safety ordinance and the manuals have to be considered
by the operator and the employer respectively at the place of installation.
The national safety and accident prevention regulations have to be observed.
The installation of a sub- assembly in terms of the pressure equipment directive 97/23/EC has to be carried
out according to this directive.
Safety codes on site have to be Condensate lines have to be connected P+I Scale Date Name
paid attention to. to a collecting line via swan neck or are X
Inst.
1:50 Drawn 26.04.2013 blinzler1
to be fed to the condensate treatment unit Template Rev. 02.03.2011 X DIN A2 Checked 26.04.2013 Ernst
ATTENTION! separately. A pressure-less drain has Description Sample layout sketch Plan No.
Minimum width of door is total width of unit + 100 mm to be provided for. 2x BSD T with exhaust air duct LYMU0001903e
Page 2 of 2
We reserve the right to make changes in the course of developement. This drawing can only be modified with CAD