Académique Documents
Professionnel Documents
Culture Documents
Engineering
Module 6: Well Engineering
Lesson 1: Importing Well Data
Flow from the reservoir to the surface
Reference depth
Flow from the reservoir to the surface to surface
is modeled in multiple stages:
Well connection to
• Grid block to grid block
reference depth
• Grid block to well connection
• Well connection to reference
depth
• Reference depth to surface
1
2
3 3. Side track
2.Standalone
Automatic Well Placement: Best Fit Method
Automatic Well Placement: Create Multilaterals
Well Manager
1. Open the Make logs tab in the settings for the new well 1
and select a property.
3
Exercise
Toggle synchronized
scrolling and scaling.
Insert a Completion Item
4
Grid block to well connection
Casing at exact depth No casing
bottom model.
Open
Casing longer than
the bottom model.
No connection
No connection
Extra connection
No connection
In Petrel, Grid block to well connections are defined by the completions, depending on the
completion type and location the grid cell will be open or close to flow.
Enlarge/squeeze a display item in the Well section
window
Stretch/squeeze the
perforation
Move the
perforation
Must be in Select or up/down
Pick mode
Completions Manager
Enter:
• Depth
• Start/end date
• Diameter
• Skin
• KH
• etc…
Completions Manager: Equipment Tab
Use this tab to define new equipment. The equipment defined here can be used by one
or more completion items.
Well Completion Design: Operations (1)
Well completions and associated data are imported using the Well
event data (ASCII) (*.ev) format.
Perforation 1
Squeeze 1
Plugback 1