Académique Documents
Professionnel Documents
Culture Documents
𝑡
𝑇 = 𝑛 , 𝐷𝑜𝑛𝑑𝑒 𝑡 𝑒𝑠 𝑒𝑙 𝑡𝑖𝑒𝑚𝑝𝑜 𝑦 𝑛 𝑒𝑙 𝑛𝑢𝑚𝑒𝑟𝑜 𝑑𝑒 𝑂𝑠𝑐𝑖𝑙𝑎𝑐𝑖𝑜𝑛𝑒𝑠
𝑙
𝑇 = 2𝜋√ , 𝐷𝑜𝑛𝑑𝑒 𝑙 𝑒𝑠 𝑙𝑎 𝑙𝑜𝑛𝑔𝑖𝑡𝑢𝑑 𝑑𝑒 𝑙𝑎 𝑐𝑢𝑒𝑟𝑑𝑎 𝑦 𝑔 𝑒𝑠 𝑙𝑎 𝑔𝑟𝑎𝑣𝑒𝑑𝑎𝑑.
𝑔
Frecuencia Angular (𝝎): Se define como el ángulo girado por unidad de tiempo.
Su unidad es radian por segundo(rad/s).
2𝜋 𝑔
𝜔= , 𝜔=
𝑇 𝑙
RESUMEN
En el laboratorio estudiamos el Movimiento Armónico simple mediante un sistema
de Péndulo simple. Comenzamos con el montaje del sistema uniendo perpendicular
la varilla al soporte, luego tomamos una cuerda de un metro de longitud y
suspendimos en ella una pesa, generando así un péndulo simple. Medimos un
ángulo entre 19˚ y 20˚ con ayuda de un transportador, y comenzamos a tomar el
tiempo que tardaba en realizar diez oscilaciones. Fuimos reduciendo la longitud de
la cuerda de diez en diez centímetros hasta tomar el tiempo para diez longitudes
diferentes. Luego tomamos cuatro pesas diferentes y medimos su masa con una
báscula digital. Con cada una de ellas armamos un sistema de péndulo simple con
una longitud de setenta centímetros, las pusimos a oscilar con amplitudes diferentes
y menores a 20˚, y medimos el tiempo que tardaba cada una en realizar diez
oscilaciones. Por último, con los datos obtenidos calculamos el periodo de cada una
y realizamos las tablas correspondientes.
ABSTRACT
In the laboratory we study simple Harmonic Movement through a simple Pendulum
system. Begin with the assembly of the system by joining the rod perpendicular to
the support, then we take a rope of one meter in length and suspend a weight in it,
thus generating a simple pendulum. We measured an angle between 19˚ and 20˚
with the help of a protractor, and we began to take the time it took to perform ten
oscillations. We were reducing the length of the rope from ten to ten centimeters to
take time for ten different lengths. Then we take four different weights and measure
their mass with a digital scale. With each of them we set up a simple pendulum
system with a length of seventy centimeters, dark pulsations with different
amplitudes and less than 20˚, and we measured the time it took each to make ten
oscillations. Finally, with the obtained data, it calculates the time of each one and we
make the corresponding tables.
METODOS EXPERIMENTALES
Para medir los ángulos utilizarnos un transportador.
Para calcular el periodo experimental de cada pesa, debemos dividir el tiempo
entre el número de oscilaciones:
𝑡
𝑇=
𝑛
Para calcular el periodo teórico de cada pesa, debemos aplicar la siguiente
formula:
𝑙
𝑇 = 2𝜋√
𝑔
(2𝜋)2
𝑚= 𝑔
ANÁLISIS DE RESULTADOS
Longitud(L) Tiempo en
Segundos
para 10
Oscilaciones
1 19,61
0,9 18,69
0,8 17,66
0,7 16,47
0,6 15,4
0,5 14
0,4 12,55
0,3 11
0,2 8,82
0,1 6,83
Calculamos los periodos para cada longitud:
𝑡
𝑇=
𝑛
19,61s
𝑇1 = = 1,961𝑠𝑒𝑔
10
18,69s
𝑇2 = = 1,869𝑠𝑒𝑔
10
17,66s
𝑇3 = = 1,766𝑠𝑒𝑔
10
16,47s
𝑇4 = = 1,647𝑠𝑒𝑔
10
15,4s
𝑇5 = = 1,54𝑠𝑒𝑔
10
14s
𝑇6 = = 1,4𝑠𝑒𝑔
10
12,55s
𝑇7 = = 1,255𝑠𝑒𝑔
10
11s
𝑇8 = = 1,1𝑠𝑒𝑔
10
8,82s
𝑇9 = = 0,882𝑠𝑒𝑔
10
6,83s
𝑇10 = = 0,683𝑠𝑒𝑔
10
4.5
4
y = 3.8052x + 0.0602
3.5
3
Periodo cuadrado
2.5
1.5
0.5
0
0 0.2 0.4 0.6 0.8 1 1.2
Longitud(L)
Observamos que la tendencia de la gráfica es una línea recta, por lo que la
pendiente viene a ser:
(2𝜋)2
𝑚= 𝑔
𝑚 = 3,8052
Por lo tanto, tenemos que:
𝑚 = 3,8052𝑠 2 /𝑚
O si la hallamos normalmente:
𝑃1 (0,4𝑚 , 1,58𝑠 2 )
𝑃2(0,5𝑚 , 1,96𝑠 2 )
𝑌2 − 𝑌1 1,96𝑠 2 − 1,58𝑠 2
𝑚= = = 3,8𝑠 2 /𝑚
𝑋2 − 𝑋1 0,5𝑚 − 0,4𝑚
1𝑚
𝑇1 = 2𝜋√ = 2,01𝑠𝑒𝑔
9,8𝑚/𝑠 2
0,9𝑚
𝑇2 = 2𝜋√ = 1.90𝑠𝑒𝑔
9,8𝑚/𝑠 2
0,8𝑚
𝑇3 = 2𝜋√ = 1.79𝑠𝑒𝑔
9,8𝑚/𝑠 2
0,7𝑚
𝑇4 = 2𝜋√ = 1.68𝑠𝑒𝑔
9,8𝑚/𝑠 2
0,6𝑚
𝑇5 = 2𝜋√ = 1.55𝑠𝑒𝑔
9,8𝑚/𝑠 2
0,5𝑚
𝑇6 = 2𝜋√ = 1.42𝑠𝑒𝑔
9,8𝑚/𝑠 2
0,4𝑚
𝑇7 = 2𝜋√ = 1.27𝑠𝑒𝑔
9,8𝑚/𝑠 2
0,3𝑚
𝑇8 = 2𝜋√ = 1,10𝑠𝑒𝑔
9,8𝑚/𝑠 2
0,2𝑚
𝑇9 = 2𝜋√ = 0,898𝑠𝑒𝑔
9,8𝑚/𝑠 2
0,1𝑚
𝑇10 = 2𝜋√ = 0.63𝑠𝑒𝑔
9,8𝑚/𝑠 2
𝑉𝑎𝑙𝑜𝑟𝑇𝑒𝑜𝑟𝑖𝑐𝑜 − 𝑉𝑎𝑙𝑜𝑟𝐸𝑥𝑝𝑒𝑟𝑖𝑚𝑒𝑛𝑡𝑎𝑙
𝐸𝑟𝑟𝑜𝑟𝑃𝑜𝑟𝑐𝑒𝑛𝑡𝑢𝑎𝑙 = | | × 100%
𝑉𝑎𝑙𝑜𝑟𝑇𝑒𝑜𝑟𝑖𝑐𝑜
2,01𝑠 − 1,961𝑠
𝐸1 = | | × 100% = 2,44%
2,01𝑠
1,90𝑠 − 1,869𝑠
𝐸2 = | | × 100% = 1,63%
1,90𝑠
1,79𝑠 − 1,766𝑠
𝐸3 = | | × 100% = 1,34%
1,79𝑠
1,68 − 1,647𝑠
𝐸4 = | | × 100% = 1,96%
1,1𝑠
1,55𝑠 − 1,54𝑠
𝐸5 = | | × 100% = 0,65%
1,55𝑠
1,42𝑠 − 1,4𝑠
𝐸6 = | | × 100% = 1,41%
1,42𝑠
1,27𝑠 − 1,255𝑠
𝐸7 = | | × 100% = 1,18%
1,27𝑠
1,1𝑠 − 01,1𝑠
𝐸8 = | | × 100% = 0%
1,1𝑠
0,898𝑠 − 0,882𝑠
𝐸9 = | | × 100% = 1,78%
0,898𝑠
0,63𝑠 − 0,683𝑠
𝐸10 = | | × 100% = 8,41%
0,63𝑠
Luego a partir de los datos obtenidos para el periodo en función de la masa y la
amplitud, se realizaron las siguientes tablas:
18 15,94 1,594
15 15,87 1,587
10 16,05 1,605