six
™.
saw
507-01.20 | adjustment of Camshaft for Valve and Injection Timing | “tia‘a
L16/24
3). Place a lamp and a mirror infront of the holes
2s shown in fig 4
4) Look through the pump from one side and at
the same time tum the engine in its normal
directions unti the plunger in the barrel cuts off
‘the light from the flashlight on the other side
6) Check injection timing from step 2.
7) _Iftiming ofthe fuel camshaftis OK, then tighten
the bolts on the gearwheel. Tightening torque,
please see page 500.40.
8) Tighten up the plugs. Tightening torque. please
‘see page 500.40.
Note: Check the stamp on the flywheel. This must
bbe according to fig 5.
5) If re-agjustment of the camshatt is needed,
then loosen the gearwheel and adjust (lighten,
cone bot),
Pump type: Woodward LOrange
Engine rpm 000 1200 1000 1200
Light method (E) js.s*40.58TDC [86° s0sBTDC | 9.8" 0,58TDC|127"20.5BTDC
Flywheel circumference
mm? (3078: 360) 855 855 855 85
~ mm (8.55 x aty.*) 47 24mm 744mm e4ramm | 10924mm
Fig 5 Stat idection tring
‘e022 00 525004,08.12
STX Engine
01.08-€s0