IMPLEMENTATION OF THE PROTOTYPE OF DOUBLE
FED INDUCTION GENERATOR AND TO STUDY THE
REACTIVE POWER GENERATION BY DFIG V/S THE
AVAILABLE COMPENSATION TECHNIQUES
(28/2005)
B.E (ELECTRICAL) PROJECT REPORT
Prepared by:
Zohaib Ahmad Siddiqui (Group Leader) EE-05093
Yasir Jamal EE-05086
Waqas Naseer Sheikh FE-05089
Samiya Zafar FE-05106
Deptt. of Electrical ia,
NED University of Bagg. & Foo),
KARACHI.
rec. No LLL, .ie
Project Advisors:
Syed Tanveer Abmed Jaffrey Mirza Mohammad Ali Baig
External Advisor Internal Advisor
Vice President Lecturer
JAFFREY & ASSOCIATES N.E.D UET
DEPARTMENT OF ELECTRICAL ENGINEERING
NED UNIVERSITY OF ENGINEERING AND TECHNOLOGY
KARACHE-75270ABSTRACT
ABSTRACT
In the last few years, there is a strong trend towards decentralized production and supply,
leading to @ situation where a growing number of small and medium size producers will be
connected to energy networks. But at the same time, the power quality of the generation
must be ensured and this means that the electrical parameters of the distribution network
have to be maintained within their upper and lower limits,
Currently the accepted technology for large wind turbines is the doubly-fed induction
generator (DFIG). Similar approach is used for generation but with an exception;
Especially for remote areas where wind is available in bulk, small scale wind farms are
suitable for which a complete set up is analyzed .The rotor windings are energized through
a3 phase AC of low frequency and the stator supplies 3 phase AC to the load. Thus the
induction generator no more remains doubly excited. The method of pitch control is
employed for consiant frequency operation. The simulation results are presented. Results of
hardware analysis and testing are also presented.
REFERENCE LIBRARY
Deptt. of Blectrical Engo.
NED University of Bags. & Tech,
KARACHL
Ace, NoALYG....Date..ACKNOWLEDGMENTS
ACKNOWLEDGMENTS
First of all we thank Almighty Allah, who made ail things possible.
We would like to acknowledge and extend our heartfelt gratitude to the people
who have made the completion of this project possible.
Special thanks to Project Internat Advisor Mr. Mirza Mohammad Ali Baig for
lending us his help & support during the project and for leading us towards the
right approaches. It goes without saying that without him, the project would not
have been possible.
We would like to thank our Project External Advisor Mr. Syed Tanveer Ahmed
Jafferi for considering us to be able to carry out the project.
We would thank our Class Advisor Mr. Abdul Ghani Abro, for approving our
project proposal, for taking keen interest in the project activities & for being a
helping hand whenever we needed him.
In the end, we would like to thank all Lab In charges for helping us in carrying
out the tests and experiments.