Compass Surveying is a type of surveying to determine direction of surveying line by using a
magnetic compass, and the length of the lines from other station to another station are measured with a tape. Measuring tape had been used to finish this task. The compass is used to run the traverse line. The compass gives bearing of lines with respect to magnetic north. The included angles can then calculated using suitable formulas in case of clockwise and anti-clockwise traverse respectively. For each survey line traverse, surveyors take two bearings that is forward as well as back bearing which should logic according to the quadrant. The procedure was repeated until the surveyed line reach its first station back. Finally, record all the point at the land that used to make compass surveying transfer to make a final plan.