Académique Documents
Professionnel Documents
Culture Documents
MEMBER:
57 ;
COORDINA
TE: x = 0.50
L = 2.48 m
Cross-
section
properties:
HEA 200
Parameter
s of
buckling
analysis:
About the
y axis of
cross-
section
Curve,y b Buckling curve (Table 6.2)
Lcr,y 5.00 m Effective buckling length (6.3.1.2.(1))
Lamy 60.37 Slenderness ratio (6.3.1.2.(1))
Lam_y 0.70 Non-dimensional slend. ratio for buckling (6.3.1.2.(1))
alfa,y 0.34 imperfection factor (6.3.1.2.(2))
fi,y 0.83 Coefficient for calculation of X (6.3.1.2.(1))
Xy 0.79 Reduction factor for buckling (6.3.1.2.(1))
Ny,b,Rd 1108.6 kN Design buckling resistance of comp. member (6.3.1.1.(3))
About the
z axis of
cross-
section
Curve,z c Buckling curve (Table 6.2)
Lcr,z 5.00 m Effective buckling length (6.3.1.2.(1))
Lamz 100.38 Slenderness ratio (6.3.1.2.(1))
Lam_z 1.16 Non-dimensional slend. ratio for buckling (6.3.1.2.(1))
alfa,z 0.49 imperfection factor (6.3.1.2.(2))
fi,z 1.40 Coefficient for calculation of X (6.3.1.2.(1))
Xz 0.46 Reduction factor for buckling (6.3.1.2.(1))
Nz,b,Rd 641.7 kN Design buckling resistance of comp. member (6.3.1.1.(3))
Parameter
s of lateral-
torsional
buckling
analysis:
Method of
interaction
parameter
calculation
s - Annex B
Cmy 0.90 Parameter related to bending moment distribution (Table B.3)
Cmz 0.90 Parameter related to bending moment distribution (Table B.3)
CmLT 0.90 Parameter related to bending moment distribution (Table B.3)
kyy 0.90 Interaction parameter (Table B.1)
kyz 0.54 Interaction parameter (Table B.1)
kzy 0.54 Interaction parameter (Table B.1)
kzz 0.90 Interaction parameter (Table B.1)
Internal
forces at
characteris
tic points
of cross
section
Section
strength
check:
UFS[Nc] 0.00 N,Ed/Nc,Rd (6.2.4.(1))
0.05 (My,Ed/MN,y,Rd)^ 2.00 + (Mz,Ed/MN,z,Rd)^1.00 (6.2.9.1.(6))
UFS[NcMy
Mz]
UFS[Vy] 0.00 Vy,Ed/Vy,c,Rd (6.2.6.(1))
UFS[Vz] 0.02 Vz,Ed/Vz,c,Rd (6.2.6.(1))
Global
stability
check of
member:
0.48 Max(Lambda,y/Lambda,max ; stable
UFB[Lambd Lambda,z/Lambda,max)
a]
0.53 N,Ed/(Xy*N,Rk/gM1) + kyy*My,Ed,max/ (6.3.3.(4))
UFB[NyMy (XLT*My,Rk/gM1) + kyz*Mz,Ed,max/(Mz,Rk/gM1)
Mz]
0.33 N,Ed/(Xz*N,Rk/gM1) + kzy*My,Ed,max/ (6.3.3.(4))
UFB[NzMy (XLT*My,Rk/gM1) + kzz*Mz,Ed,max/(Mz,Rk/gM1)
Mz]
Ratio: