Académique Documents
Professionnel Documents
Culture Documents
Previous Screen
Product: EXCAVATOR
Model: 320D EXCAVATOR FAL
Configuration: 320D & 320D L Excavators FAL00001-UP (MACHINE)
POWERED BY C6.4 Engine
i02588581
This procedure is used to enter the service mode of the operator monitor.
Illustration 1 g01198159
1. Illustration 1 is the default screen of the monitor. This screen appears when the monitor is initially turned
ON.
Illustration 2 g01197980
(1) Up key
(8) OK key
Illustration 3 g01197981
2. Press menu key (6) . Illustration 3 will be displayed. Press right key (2) in order to highlight "SERVICE"
menu option.
4. After OK key (8) is pressed, the above screen will be displayed. The keys for direction are used to input the
password. Different passwords allow access to menus that are in the monitor. For more information on the
passwords, Refer to Systems Operation, "Monitor Overview" for the Tool Control System. The password that
allows access to all menus that are used for service is "FFF2". Press left key (3) or right key (4) in order to
change the position of the flashing character. Press the OK key (8) in order to enter the highlighted character.
Illustration 5 g01220277
5. After entering the last letter of the password, the monitor will continue with the "SERVICE" screen.
Illustration 6 g01220279
6. When the correct password is entered, the "SERVICE" menu will appear.
Illustration 7 g01220281
8. Press the OK key (8) in order to retry the password. Press the cancel key (7) in order to exit the program.
1. Press the cancel key (7) . The monitor will display the previous menu when the cancel key is pressed. Stop
when the default screen appears.
2. Press the home key (4) . By pressing the home key, the monitor will automatically go to the default screen.
Copyright 1993 - 2009 Caterpillar Inc. Fri Jan 30 15:17:55 UTC+0630 2009
All Rights Reserved.
Private Network For SIS Licensees.