Académique Documents
Professionnel Documents
Culture Documents
10/23/06
This kit has been released in order to provide the heat shield as a serviceable part, to avoid
replacement of the entire exhaust weldment.
(F187) S40-70FT: Order kit part number 1651294 from the Parts Distribution Center.
(L177) H40-70FT: Order kit part number 1651288 from the Parts Distribution Center.
Detailed installation instructions are included with these kits (see page 2).
Mounting
Bracket
B
Capscrew M6 X 1
X 12 mm
Nut – Folder –
M6 X 1.0 mm
Exhaust Pipe
(not included in
Exhaust the kit)
Shield
AC00014
Page 2 of 2
NOTE: Trucks built effective with serial number F187V07422D utilize a new design exhaust
weldment with a bolt-on shield where the shield can be directly replaced in the event of failures or
breakage. It is not necessary to order these kits for trucks with this new design. The serial number
break for the H40-70FT models is not available yet and will be distributed in a later revision to this
Gram.
Warranty Reimbursement:
The information contained herein is for information purposes only and will not be considered for
warranty reimbursement unless a failure occurs within the warranty period.
We reserve the right to change the design of our products without incurring an obligation to modify previously manufactured products.