Académique Documents
Professionnel Documents
Culture Documents
BLOG
Search...
The Optical Time Domain Reflectometer (OTDR) is an essential tool used to test the integrity of fiber
optic cables, which can be applied to evaluate the length of fiber cables, measure transmission and
connection attenuation and to detect the fault location of fiber links as well. Based on these functions, it is
commonly employed to fiber optical cable maintenance and construction. Moreover, OTDRs are most
effective when testing long cables or cable plants with splices by illustrating where the cables are terminated
and confirming the quality of the fibers, connections and splices.
During the process of OTDR testing, the instrument injects a higher power laser or fiber optic light
source pulse into a fiber from one end of the fiber cable, with the OTDR port to receive the returning
information. As the optical pulse is transmitted through the fiber, part of the scattered reflection will return to
the OTDR. Only useful information returned could be measured by the OTDR detector which acts as the time
or curve segments of fibers at different positions. By recording the time for signals from transmission to
returning and the speed of transmission in fibers, the distance thus can be calculated. The following picture
shows exactly how an OTDR works for fiber optic testing.
https://community.fs.com/blog/working-principle-and-characteristics-of-otdr.html 1/4
2019/5/15 Working Principle and Characteristics of OTDR
BLOG
Search...
Rayleigh scattering power is related to the wavelength of transmitted signal: the shorter the wavelength, the
stronger the power, which means the backscatter lose generated by the trajectory of 1310nm signal will be
higher than that of 1550nm signals.
In the higher wavelength region (more than 1500 nm), the Rayleigh scattering will continue to decrease, and
another phenomenon called infrared attenuation (or absorption) will appear to increase thus to cause an
increase of the overall attenuation values. Therefore, 1550nm wavelength has the lowest attenuation, which
testifies why it is a long distance communication wavelength. Similarly, OTDR of 1550nm wavelength also
has low attenuation, therefore it can be used for long distance testing as well.
Fresnel reflection falls into the category of discrete reflection that is caused by the individual point of the
whole fibers. These points are the result of changes in reverse coefficient elements such as glass and air
gap. At these points, a strong backscatter light will be reflected back. Therefore, OTDR uses the information
of Fresnel reflection to locate the connection point, fiber optic terminal and breakpoints.
https://community.fs.com/blog/working-principle-and-characteristics-of-otdr.html 2/4
2019/5/15 Working Principle and Characteristics of OTDR
the operation of OTDR to a large extent, making it unable to locate and resolve faults. The following picture
BLOG
shows the dead zone of the OTDR.
Search...
The dead zone seems like a problem when using OTDR for testing, however, adapting visual fault
locator (VFL) can serve as an effective solution for solving this issue. It works as a complement to the
OTDR in cable troubleshooting since it successfully covers the range where OTDRs fail to monitor because
of the dead zone. The visual fault locator is designed with a visible laser and universal adapter like FC, SC
and ST etc, which contributes to locate faults on the fiber link easily. For instance, to locating the breakpoint,
bending or cracking of the fiber optic cables and locate the fault of ODTR dead zone as well. The higher
power of a visual fault locator can find breaks in fibers or high losses around connectors in simplex cables. If
the light escapes at one break, it will be visible through the jacket of the fiber. Which is especially helpful in
finding cable faults near the end of a cable, whereas the dead zone of the OTDR restrains its ability to
resolve faults. Meanwhile, the VFL also can be applied to finding cracked fibers or bad splices where an
OTDR unable to do so.
Conclusion
In conclusion, an OTDR tester is an optical radar in essence. By sending out a flash of bright light, it
measures the intensity of echo or reflections. So, OTDRs are mainly used in the optical fiber installation and
maintenance service of access networks (communications links between telephone exchanges) and user
networks (communications links between user sites and telephone poles). And computation is used to
display a trace and make a number of mathematical deductions. Fiberstore (FS) offers a wide range of
OTDRs of reliable and excellent quality, for more information and details, kindly visit the website at
www.fs.com or contact over sales@fs.com.
Tags: fiber optic light source, optical time domain reflectometer, OTDR, VFL, visual fault locator
Social Media
https://community.fs.com/blog/working-principle-and-characteristics-of-otdr.html 3/4
2019/5/15 Working Principle and Characteristics of OTDR
BLOG
https://community.fs.com/blog/working-principle-and-characteristics-of-otdr.html 4/4