Académique Documents
Professionnel Documents
Culture Documents
1. There are two routers A and B in enterprise network of ATech company that use EIGRP. How does Router A watch for
the status of Router B so that router A could react if router B fails?
A) By using EIGRP Hello messages, with A needing to receive periodic Hello messages to believe B is still working
B) By using EIGRP update messages, with A needing to receive periodic update messages to believe B is still working
C) Using a periodic ping of B's IP address based on the EIGRP neighbor timer
D) None of the other answers are correct
Reference:
http//aurumme.com/atech/hello-protocol/
https//www.facebook.com/groups/ATechIT/249614652263393/
2. EIGRP is a routing Protocol design by Cisco which cannot operate on Juniper Routers?
A) True
B) False
8. For default gateway you will use which of following command on Cisco router?
A) IP default network
B) IP default gateway
C) IP default route
D) Default network
10. EIGRP uses the ____________ algorithm for finding shortest path
A) SPF
B) DUAL
C) Link stat
D) Dijkstra algorithm
14. Which EIGRP information is held in RAM and maintained through the use of Hello and update packets? (Choose two)
A) Neighbor table
B) STP table
C) Topology table
D) DUAL table
15. Which of the following protocols support VLSM, summarization, and discontiguous networking?
A) RIPv1
B) IGRP
C) EIGRP
D) BGP
17. For EIGRP authentications you need to synchronize the date/time on all the routers with _____ server.
A) NTTP
B) NTP
C) Time
D) AAA
18. There are three tables in EIGRP, choose the correct options: (Choose three)
A) Neighbor table
B) Routing table
C) Topology Table
D) DR Table
19. Neighbor table in EIGRP has the information related to about ________.
A) Connected routers
B) All routers
C) Stub router
D) Routers of connect area
20. EIGRP uses the ____________ algorithm for finding shortest path.
A) SPF
B) DUAL
C) Link stat
D) Dijkstra algorithm
24. _______________ supports the simultaneous use of multiple unequal cost paths to a destination.
A) OSPF
B) EIGRP
C) BGP
D) RIP
25. Which of the following is/are the benefits provided by EIGRP? (Choose three)
A) Faster convergence
B) Partial routing updates
C) High bandwidth utilization
D) Route summarization
26. The Enhanced Interior Gateway Routing Protocol (EIGRP) is categorized as a ______________.
A) Distance vector routing protocols
B) Link state routing protocols
C) Hybrid routing protocols
D) Automatic state routing protocols
28. A network administrator needs to configure a router with a distance-vector protocol that allows classless routing.
Which of the following satisfies those requirements?
A) OSPF
B) BGP
C) IGRP
D) EIGRP
31. The router eigrp _______________ command enables the EIGRP process.
A) Autonomous-system
B) Autnomous-system
C) Autonomouse-system
D) None of these
35. The default administrative distance of ___ is used for internal routes, and ___ for routes imported from an external
source.
A) 60, 150
B) 20,100
C) 90, 170
D) 100,300
39. The autonomous system number is not significant to the EIGRP routing domain.
A) Yes
B) No
40. Used in both EIGRP and OSPF routing protocols, the router ID’s role is more significant in EIGRP
A) Yes
B) No
42. The ________ is the lowest calculated metric to reach the destination network.
A) Feasible successor
B) Feasible distance
C) Reported distance
D) Successor
43. _______ is an EIGRP neighbor’s feasible distance to the same destination network.
A) Feasible successor
B) Feasible distance
C) Reported distance
D) Successor
45. __________ is a neighbor that has a loop-free backup path to the same network as the successor, and it satisfies
the Feasibility Condition (FC).
A) Feasible successor
B) Feasible distance
C) Feasibility Condition
D) Successor
47. ______ sends partial bounded updates when a change occurs on network.
A) DUAL
B) DUAL FSM
C) EIGRP
D) OSPF
48. ________ give EIGRP the capability to support different Layer 3 protocols.
A) PDMs
B) PDWs
C) PDQs
D) PFSs
50. Which of the following affect the calculation of EIGRP metrics when all possible default values are used? (Choose two)
A) Bandwidth
B) Delay
C) Load
D) Reliability