Académique Documents
Professionnel Documents
Culture Documents
Datos:
Esfuerzos en anillos rotatorios:
ri = 3𝑖𝑛
ro = 5𝑖𝑛 3+𝑣 𝑟𝑖 2 𝑟𝑜 2 1 + 3𝑣 2
𝑒 = 1.5𝑖𝑛 𝜎𝑡 = 𝜌𝜔2 ( ) (𝑟𝑖 2 + 𝑟𝑜 2 + 2 − 𝑟 )
8 𝑟 3+𝑣
Sy = 210 MPa
𝜈 = 0.3ρ = 7860 Kg/𝑚3 3+𝑣 𝑟𝑖 2 𝑟𝑜 2
𝜎𝑟 = 𝜌𝜔2 ( ) (𝑟𝑖 2 + 𝑟𝑜 2 − 2 − 𝑟 2 )
8 𝑟
r = ri
𝑠𝑦
𝜔= = 1457.29 𝑟𝑎𝑑/𝑠 = 13916.14 𝑟𝑝𝑚
√ 3+𝑣 𝑟 2 𝑟 2 1 + 3𝑣
𝜌 ( 8 ) (𝑟𝑖 2 + 𝑟𝑜 2 + 𝑖 2𝑜 − 3 + 𝑣 𝑟 2 )
𝑟
r = (rori)1/2
𝑆𝑦
𝜔=√ = 5009.82𝑟𝑎𝑑/𝑠 = 47840.26 𝑟𝑝𝑚
3+𝑣
𝜌 ( 8 ) (𝑟𝑖 2 + 𝑟𝑜 2 − 2𝑟𝑖 𝑟𝑜 )
r =ri
𝑝𝑖 𝑟𝑖2 −𝑝𝑜 𝑟𝑜2 −𝑟𝑜2 (𝑝𝑜 −𝑝𝑖 ) 𝑝𝑖 𝑟𝑖2 −𝑝𝑜 𝑟𝑜2 −+(𝑝𝑜 −𝑝𝑖 )
𝜎𝑡 = = 12.81 𝑘𝑝𝑠𝑖 𝜎𝑟 = = −500 𝑝𝑠𝑖
𝑟𝑜2 −𝑟𝑖2 𝑟𝑜2 −𝑟𝑖2
r =ro
𝑝𝑖 𝑟𝑖2 −𝑝𝑜 𝑟𝑜2 −𝑟𝑜2 (𝑝𝑜 −𝑝𝑖 ) 𝑝𝑖 𝑟𝑖2 −𝑝𝑜 𝑟𝑜2 −+(𝑝𝑜 −𝑝𝑖 )
𝜎𝑡 = = 12.33 𝑘𝑝𝑠𝑖 𝜎𝑟 = = −14 𝑝𝑠𝑖
𝑟𝑜2 −𝑟𝑖2 𝑟𝑜2 −𝑟𝑖2
𝑆𝑦 46 𝑘𝑝𝑠𝑖
𝜂= =
𝜎𝑡 12.81 𝑘𝑝𝑠𝑖
𝜂 = 3.6
3. [Carga Estática] Dos tubos de acero se ajustan por contracción donde los diámetros son 1.50, 1.75
y 2.0 pulg. Mediciones cuidadosas que se realizaron antes del ajuste revelaron que la interferencia
diametral entre los tubos es de 0.00246 pulg. Después del ajuste, el ensamble se sujeta a un par de
torsión de 8000 lbf pulg y un momento flexionante de 6000 lbf · pulg. Suponiendo que no hay
deslizamiento entre los cilindros, analice el cilindro exterior en los radios interno y externo.
Determine el factor de seguridad usando la energía de distorsión con Sy = 60 kpsi.
D= 1.75 in
di= 1.5 in
do= 1.75 in
E = 30 x106 psi
v= 0.292
I = (π/64)(24-1.54) = 0.537 in4
7. One member of an automatic transfer device in a factory must withstand a repeated tensile load of
800 lb and must not elongate more than 0.010 in in its 25.0-in length. Specify a suitable steel material
and the dimensions for the rod if it has a square cross section.
8. Specify a suitable material for a hollow shaft with an out- side diameter of 40 mm and an inside
diameter of 30 mm when transmitting 28 kilowatts (kW) of steady power at a speed of 45 radians
per second (rad/s).