Académique Documents
Professionnel Documents
Culture Documents
J LOADER
344J
J-SERIES LOADER
Specifications
Engine
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . John Deere PowerTechTM 4045T with turbocharger; certified to EPA Tier 2 emissions
Net Peak Power (ISO9249) . . . . . . . . . . . . . . . . 98 hp (71 kW) @ 2,400 rpm
Net Peak Torque (ISO9249) . . . . . . . . . . . . . . . . 291 lb.-ft. (395 Nm) @ 1,400 rpm
Cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . 276 cu. in. (4.5 L)
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . pressure system with full-flow spin-on filter and cooler
Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . sucker type, proportional, hydraulically driven
Electrical System. . . . . . . . . . . . . . . . . . . . . . . . 12 volt with 65-amp alternator
Batteries (two 12 volt) . . . . . . . . . . . . . . . . . . . . reserve capacity: 176 min. standard, 850 CCA
Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . dual safety element dry type
Transmission
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . hydrostatic (HST) with infinitely variable speed control over full range of operating speeds; two speed ranges
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . low-effort electric shift; joystick-mounted F-N-R; two speed ranges; HST inching pedal, which allows infinitely reduced travel speeds
while maintaining full engine rpm and hydraulic flow
Travel Speeds (two forward and two reverse) Forward and Reverse
Speed Range 1 . . . . . . . . . . . . . . . . . . . . . . 5.0 mph (8.0 km/h)
Speed Range 2 . . . . . . . . . . . . . . . . . . . . . . 18.6 mph (30.0 km/h)
Axles/Brakes
Final Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . heavy-duty planetary, mounted outboard
Differentials. . . . . . . . . . . . . . . . . . . . . . . . . . . . hydraulic 100% dif-lock front and conventional rear differential
Rear Axle Oscillation Versus Front . . . . . . . . . . . 20 degrees total, stop to stop (composed of 10 degrees axle oscillation plus 10 degrees frame oscillation)
Brakes (conform to SAE J1473, ISO3450)
Service Brakes . . . . . . . . . . . . . . . . . . . . . . hydraulically actuated, self-adjusting internal wet-disk brake and driveline drum brake
Parking Brake . . . . . . . . . . . . . . . . . . . . . . . automatic spring-applied, hydraulically released, internal wet disk
Tires
Choice of Tread Width Width Over Tires Change In Vertical Height
17.5R25EM, GP-2B 6S L2 Goodyear . . . . . . 73.6 in. (1870 mm) 91.1 in. (2315 mm) 0 in. (0 mm)
17.5R25EM, XTLA L2 Michelin . . . . . . . . . . 73.6 in. (1870 mm) 91.6 in. (2328 mm) – 0.8 in. (– 20 mm)
17.5R25EM, XHA L3 Michelin . . . . . . . . . . . 73.6 in. (1870 mm) 91.2 in. (2318 mm) – 0.6 in. (– 15 mm)
17.5R25EM, SGL-D/L2 A Goodyear . . . . . . . 73.6 in. (1870 mm) 91.2 in. (2316 mm) 0 in. (0 mm)
PAGES
2–3
Hydraulic System/Steering
Pump (loader and steering) . . . . . . . . . . . . . . . . constant-displacement gear pump
Maximum Flow @ 1,000 psi (6895 kPa) . . . 30 gpm (115 L/min.) @ 2,400 rpm
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . loader and steering relief 3,335 psi (22 990 kPa, or 230 bar)
Loader Controls. . . . . . . . . . . . . . . . . . . . . . . . . pilot-operated, pressure-compensating, two-function valve with unloader; single-lever control and control-lever lockout feature;
optional third- and fourth-function valves
Hydraulic Cycle Times . . . . . . . . . . . . . . . . . . . . 9.9 total sec. (with the original pump)
Raise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4 sec.
Dump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 sec.
Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0 sec. (float down) / 3.0 sec. (power down)
Steering (conforms to SAE J1511)
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . power, fully hydraulic articulation
Relief Valve Setting . . . . . . . . . . . . . . . . . . . 3,771 psi (26 000 kPa, or 260 bar)
Articulation Angle/Rear Wheel Steering
Angle . . . . . . . . . . . . . . . . . . . . . . . . . . 60-degree arc (30 degrees each direction) plus 26-degree rear-wheel steering tied mechanically to articulation
Turning Radius (measured to centerline
of outside tire) . . . . . . . . . . . . . . . . . . . 166 in. (4205 mm)
B A
F
M
C
D
I E
J
Dimensions with Quick-
Coupler and Bucket
A Dump Clearance. . . . . . . . . . . . . . . . . . . . . . ▲ (see next page)
B Dump Reach . . . . . . . . . . . . . . . . . . . . . . . . ▲▲ (see next page)
C Maximum Digging Depth . . . . . . . . . . . . . . . 2.0 in. (53 mm) F
D A
C
E
Dimensions with Quick-Coupler and Fork
CONSTRUCTION UTILITY FORK A
A Reach, Fully Raised . . . . . . . . . . . . . . . . . . . 26.7 in. (678 mm)
B Fork Height, Fully Raised . . . . . . . . . . . . . . . 137.6 in. (3497 mm)
C Maximum Reach, Fork Level. . . . . . . . . . . . . 59 in. (1500 mm)
D Fork Height, Maximum Reach. . . . . . . . . . . . 67.5 in. (1715 mm)
E Reach, Ground Level. . . . . . . . . . . . . . . . . . . 32 in. (815 mm)
F Tine Length . . . . . . . . . . . . . . . . . . . . . . . . . 47.2 in. (1200 mm)
G Overall Length . . . . . . . . . . . . . . . . . . . . . . . 266.5 in. (6770 mm) C
Tipping Load, Straight (fork level, load
centered on tine). . . . . . . . . . . . . . . . . . . . . 9,700 lb. (4400 kg) B
Tipping Load, Full Turn (fork level, load
centered on tine). . . . . . . . . . . . . . . . . . . . . 8,884 lb. (4030 kg)
Operating Weight. . . . . . . . . . . . . . . . . . . . . . . . 18,452 lb. (8370 kg) E
F
G
Standard Z-Bar Information with Pin-On Type Bucket
General Purpose
Bucket Type/Size w/Bolt-on Edge
Capacity, Heaped SAE. . . . . . . . . . . . . . . . . 2.0 cu. yd. (1.5 m3)
Capacity, Struck SAE. . . . . . . . . . . . . . . . . . 1.6 cu. yd. (1.2 m3)
Bucket Width . . . . . . . . . . . . . . . . . . . . . . . 94.5 in. (2400 mm)
Breakout Force, SAE J732C . . . . . . . . . . . . 17,310 lb. (7851 kg)
Tipping Load, Straight. . . . . . . . . . . . . . . . . 13,668 lb. (6200 kg)
Tipping Load, Full Turn, SAE . . . . . . . . . . . . 12,522 lb. (5680 kg)
Reach, 45-Degree Dump, 7-ft. (2.13 m)
Clearance . . . . . . . . . . . . . . . . . . . . . . . 59.0 in. (1500 mm)
Reach, 45-Degree Dump, Full Height . . . . . 32.6 in. (830 mm)
Dump Clearance, 45 Degree, Full Height . . . 112.4 in. (2855 mm)
Overall Length . . . . . . . . . . . . . . . . . . . . . . 241.5 in. (6135 mm)
Loader Clearance Circle, Bucket In
Carry Position . . . . . . . . . . . . . . . . . . . . 177.5 in. (4510 mm)
Operating Weight . . . . . . . . . . . . . . . . . . . . 18,408 lb. (8350 kg)
Loader operating information is based on machine with all standard equipment; 17.5R25EM, GP-2B 6S L2 Goodyear tires; standard counterweight; ROPS cab; 175-lb. (79 kg)
operator; and full fuel tank. This information is affected by tire size, ballast, and different attachments.
PAGES
4–5
Standard Z-Bar Information
with Quick-Coupler and Bucket
General Purpose General Purpose
Bucket Type/Size w/Bolt-on Edge w/Bolt-on Edge
Capacity, Heaped SAE. . . . . . . . . . . . . . . . . 2.0 cu. yd. (1.5 m3) 1.75 cu. yd. (1.3 m3)
Capacity, Struck SAE. . . . . . . . . . . . . . . . . . 1.6 cu. yd. (1.2 m3) 1.4 cu. yd. (1.1 m3)
Bucket Width . . . . . . . . . . . . . . . . . . . . . . . 94.5 in. (2400 mm) 94.5 in. (2400 mm)
Breakout Force, SAE J732C . . . . . . . . . . . . 16,186 lb. (7342 kg) 16,093 lb. (7300 kg)
Tipping Load, Straight. . . . . . . . . . . . . . . . . 12,665 lb. (5745 kg) 12,978 lb. (5887 kg)
Tipping Load, Full Turn, SAE . . . . . . . . . . . . 11,596 lb. (5260 kg) 11,871 lb. (5385 kg)
▲▲ Reach, 45-Degree Dump, 7-ft.
(2.13 m) Clearance. . . . . . . . . . . . . . . . 63 in. (1608 mm) 56 in. (1425 mm)
▲▲ Reach, 45-Degree Dump, Full Height . . . . . 36 in. (915 mm) 34 in. (860 mm)
▲ Dump Clearance, 45 Degree, Full Height. . . . 109.2 in. (2775 mm) 109 in. (2768 mm)
▲▲▲ Overall Length . . . . . . . . . . . . . . . . . . . . . . 251.7 in. (6395 mm) 243.1 in. (6175 mm)
Loader Clearance Circle, Bucket In
Carry Position . . . . . . . . . . . . . . . . . . . . 29 ft. 9 in. (9080 mm) 29 ft. 8 in. (9048 mm)
Operating Weight . . . . . . . . . . . . . . . . . . . . 18,761 lb. (8510 kg) 18,741 lb. (8501 kg)
Loader operating information is based on machine with all standard equipment; 17.5R25EM, GP-2B 6S L2 Goodyear tires; standard counterweight; ROPS cab; 175-lb. (79 kg)
operator; and full fuel tank. This information is affected by tire size, ballast, and different attachments.
xim
(1.9) al Clay, natural bed
ns
rv um 2,800 1660
Lo
e
* This guide, representing bucket sizes not necessarily manufactured by Deere, will help you in selecting proper bucket size for material density, loader configuration, and operating conditions. Optimum bucket size is determined
after adding or subtracting all tipping load changes due to optional equipment. The “conservative load” line on this guide is recommended when operating in conditions such as soft ground and unlevel surfaces. The “maximum
load” condition on this guide is sometimes utilized when operating on firm ground and level surfaces.
344J LOADER
Key: ● Standard equipment ▲ Optional or special equipment *See your John Deere dealer for further information.
Net engine power is with standard equipment including air Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE stan-
cleaner, exhaust system, alternator, and cooling fan at test dards. Except where otherwise noted, these specifications are based on a unit with all standard equipment, 17.5R25, Goodyear
conditions specified per ISO9249. No derating is required up GP-2B L2 radial tires, ROPS cab, standard rear counterweight, full fuel tank, and 175-lb. (79 kg) operator.
to 10,000-ft. (3050 m) altitude.