Académique Documents
Professionnel Documents
Culture Documents
WINDOW TYPE FTP-V FTW-V FTU-V WINDOW TYPE FTP-V FTU-V VII. TECHNICAL PARAMETERS FOR WINDOWS WITH PARTICULAR GLAZING UNIT TYPES
IV. OPTIONS Glazing unit type
Technical parameters
- painted in colours of RAL spectrum U3 U5 P5 R1 P2 G2 G61
Wooden profiles for FTP-V - painted in one of five Lazure colours
- in mahogany woodwork Glazing structure 4H-16-4T 4HT-10-4H-10-4HT 4HS-10-4HT-8-33.2T 6H-12-33.2SIT 4H-15-33.2T 4HT-15-33.1T 6HT-12-33.2
- painted in colours of RAL spectrum glazing U-value 1.0 W/m2K 0.5 W/m2K 0.5 W/m2K 1.0 W/m2K 1.0 W/m2K 1.0 W/m2K 1.0 W/m2K
I. APPLICATION Cladding - cladding elements made of different types of sheet metal (CU, TC) as per EN 673
installation angle 15°-90° - non-standard size and shape of the window window U-value 1.2 W/m2K 0.97 W/m2K 0.97 W/m2K 1.2 W/m2K 1.2 W/m2K 1.2 W/m2K 1.2 W/m2K
FT_-V U3: a (width)=50-134, b (height)=78-140 as per EN 12567-2
Installation universal installation system FT_-V U5: a (width)=50-134, b (height)=78-140 acoustic insulation Rw (the window with air inlet)
on rafters and battens FT_-V R1: a (width)=50-134, b (height)=78-118 as per EN ISO 717-1
32(-1;-5) 33(-2;-6) 35(-2;-4) 36(-2;-3) 35(-1;-3) 35(-1;-3) 36 (-2;-4)
II. FEATURES FT_-V P2: a (width)=50-134, b (height)=78-140
acoustic insulation Rw (the window without air inlet)
FT_-V G2: a (width)=50-134, b (height)=78-140 as per EN ISO 717-1
33 (-1;-5) 33 (-1;-5) 37 (-2;-5) 39 (-2;-5) 36 (-1;-4) 36 (-1;-4) 39 (-2;-5)
Material pinewood, vacuum impregnated FT_-V G4: a (width)=50-134, b (height)=78-140
acrylic acrylic polyurethane FT_-V G6: a (width)=50-134, b (height)=78-140 light transmittance factor τV 0.70 0.73 0.63 0.69 0.70 0.40 0.40
Lacquer natural colour white colour white NCS S0502-Y - window with black mullion bar and cladding as per EN 410
Varnishing twice twice triple - window without air inlet solar factor g 0.53 0.53 0.48 0.52 0.52 0.23 0.23
as per EN 410
V. ADDITIONAL PRODUCTS TO BE USED
Air inlet type automatic V40P UV radiation
- standard, as per EN 410
0.26 0.28 0.01 0.01 0.01 0.01 0.01
Air inlet capacity up to 49m3/h Flashings - special,
- combination frame thermal insulation Uf* 1.68 W/m2K 1.70 W/m2K 1.61 W/m2K 1.68 W/m2K 1.68 W/m2K 1.68 W/m2K 1.68 W/m2K
System top Safe as per EN ISO 10077-1. EN ISO 10077-2
- manual
Seals four Control - electric thermal insulation of frame and glazing connection Ψ*
as per EN ISO 10077-1. EN ISO 10077-2
0.066 W/mK 0.051 W/mK 0.062 W/mK 0.078 W/mK 0.070 W/mK 0.070 W/mK 0.078 W/mK
Micro-opening facility + - insulation sets
- linings
Handle Elegant Mounting accessories - auxiliary rafters
* FAKRO internal test results
10 years for windows, 20 years for glazing unit, - insulating band ** for the window width > 114 cm and height > 140 cm: npd
Warranty 20 years for hardware elements - frame extensions npd – no performance determined
III. TECHNICAL PARAMETERS - awning blind
External accessories - roller shutter FTP-V U5 + EHV-AT Thermo = 0,86 W/m2K
Air permeability class class 4 as per EN 1026, EN 12207 - ARF blackout blind
Wind load resistance class C5** as per EN 12210 - ARP roller blind
- ARS standard roller blind
Watertightness – unshielded (A) E900 as per EN 12208 Internal accessories - AJP venetian blind
Impact resistance class 3 (450mm) as per EN 13049 - APS pleated blind
- APF pleated blind
Applicability of glazing units U3, U5, P5, R1, P2, G2, G61 - AMS insect screen
window internal area [m2] 0.32 0.41 0.51 0.62 0.62 0.75 0.91 1.05 0.93 1.12 1.15 1.38 1.12
2
effective glazing area [m ] 0.22 0.29 0.38 0.47 0.47 0.59 0.73 0.85 0.75 0.92 0.95 1.16 0.92
window weight for U3 glazing unit [kg]±1kg 20 23 26 30 30 34 40 43 39 46 43 52 46
air inlet capacity at a pressure difference of 17.28 17.28 23.34 23.34 27.89 27.89 27.89 27.89 27.89 27.89 49.08 49.08 49.08
10Pa [m3/h]
WINDOW TYPE FTP-V Secure FTU-V Secure WINDOW TYPE FTP-V Secure FTU-V Secure VII. TECHNICAL PARAMETERS FOR WINDOWS WITH PARTICULAR GLAZING UNIT TYPES
IV. OPTIONS Glazing unit type
Technical parameters
- painted in colours of RAL spectrum P2
Wooden profiles for FTP-V - painted in one of five Lazure colours
- in mahogany woodwork Glazing structure 4H-15-33.2T
- painted in colours of RAL spectrum glazing U-value 1.0 W/m2K
I. APPLICATION Cladding - cladding elements made of different types of sheet metal (CU, TC) as per EN 673
installation angle 15°-90° - non-standard size and shape of the window [cm] FTP-V P2: window U-value 1.2 W/m2K
a (width)=50-134, b (height)=78-140 as per EN 12567-2
Installation universal installation system
on rafters and battens - window with black mullion bar and cladding acoustic insulation Rw (the window with air inlet)
as per EN ISO 717-1
35(-1;-3)
II. FEATURES V. ADDITIONAL PRODUCTS TO BE USED
- standard, acoustic insulation Rw (the window without air inlet) 36 (-1;-4)
Material pinewood, vacuum impregnated as per EN ISO 717-1
Flashings - special,
acrylic polyurethane - combination light transmittance factor τV 0.70
Lacquer natural colour white NCS S0502-Y
as per EN 410
Control - manual
Varnishing twice triple - insulation sets solar factor g 0.52
as per EN 410
- linings
Air inlet type automatic V40P Mounting accessories - auxiliary rafters UV radiation
as per EN 410
0.01
Air inlet capacity up to 49m3/h - insulating band
- frame extensions frame thermal insulation Uf*
System top Safe 1.68 W/m2K
- awning blind as per EN ISO 10077-1. EN ISO 10077-2
External accessories - roller shutter
Seals four thermal insulation of frame and glazing connection Ψ* 0.070 W/mK
- ARF blackout blind as per EN ISO 10077-1. EN ISO 10077-2
Micro-opening facility + - ARP roller blind
- ARS standard roller blind
Handle Elegant with lock
Internal accessories - AJP venetian blind * FAKRO internal test results
10 years for windows, 20 years for glazing unit, - APS pleated blind ** for the window width > 114 cm and height > 140 cm: npd
Warranty 20 years for hardware elements - APF pleated blind
III. TECHNICAL PARAMETERS - AMS insect screen
Air permeability class 4 as per EN 1026, EN 12207
Wind load resistance class C5** as per EN 12210
Watertightness – unshielded (A) E900 as per EN 12208
Impact resistance class 3 (450mm) as per EN 13049
Applicability of glazing units P2
FTP-V P2 Secure window meets European 2nd anti-burglary class RC 2 N as per EN 1627.
window internal area [m2] 0.32 0.41 0.51 0.62 0.62 0.75 0.91 1.05 0.93 1.12 1.15 1.38 1.12
effective glazing area [m2] 0.22 0.29 0.38 0.47 0.47 0.59 0.73 0.85 0.75 0.92 0.95 1.16 0.92
window weight for P2 glazing unit [kg]±1kg 21 25 26 31 31 36 42 47 43 50 51 56 49
air inlet capacity at a pressure difference of 17.28 17.28 23.34 23.34 27.89 27.89 27.89 27.89 27.89 27.89 49.08 49.08 49.08
10Pa [m3/h]
WINDOW TYPE FTP-V Z-Wave FTU-V Z-Wave WINDOW TYPE FTP-V Z-Wave FTU-V Z-Wave VII. TECHNICAL PARAMETERS FOR WINDOWS WITH PARTICULAR GLAZING UNIT TYPES
IV. OPTIONS Glazing unit type
Technical parameters
- painted in colours of RAL spectrum U3 U5 P5 R1 P2 G2 G61
Wooden profiles for FTP-V - painted in one of five Lazure colours
- in mahogany woodwork Glazing structure 4H-16-4T 4HT-10-4H-10-4HT 4HS-10-4HT-8-33.2T 6H-12-33.2SIT 4H-15-33.2T 4HT-15-33.1T 6HT-12-33.2
- painted in colours of RAL spectrum glazing U-value 1.0 W/m2K 0.5 W/m2K 0.5 W/m2K 1.0 W/m2K 1.0 W/m2K 1.0 W/m2K 1.0 W/m2K
I. APPLICATION Cladding - cladding elements made of different types of sheet metal (CU, TC) as per EN 673
installation angle 15°-90° - window with black mullion bar and cladding window U-value 1.2 W/m2K 0.97 W/m2K 0.97 W/m2K 1.2 W/m2K 1.2 W/m2K 1.2 W/m2K 1.2 W/m2K
- window without air inlet as per EN 12567-2
Installation universal installation system
on rafters and battens V. ADDITIONAL PRODUCTS TO BE USED acoustic insulation Rw (the window with air inlet) 32(-1;-5) 33(-2;-6) 35(-2;-4) 36(-2;-3) 35(-1;-3) 35(-1;-3) 36 (-2;-3)
as per EN ISO 717-1
II. FEATURES - standard,
acoustic insulation Rw (the window without air inlet)
Flashings - special, as per EN ISO 717-1
33 (-1;-5) 33 (-1;-5) 37 (-2;-5) 39 (-2;-5) 36 (-1;-4) 36 (-1;-4) 39 (-2;-5)
Material pinewood, vacuum impregnated - combination
acrylic polyurethane - electric light transmittance factor τV 0.70 0.73 0.63 0.69 0.70 0.40 0.40
Lacquer natural colour white NCS S0502-Y Control as per EN 410
- manual (in case of no power)
Varnishing twice triple - insulation sets solar factor g 0.53 0.53 0.48 0.52 0.52 0.24 0.23
as per EN 410
- linings
Air inlet type automatic V40P Mounting accessories - auxiliary rafters UV radiation
as per EN 410
0.26 0.28 0.01 0.01 0.01 0.01 0.01
Air inlet capacity up to 49m3/h - insulating band
- frame extensions frame thermal insulation Uf*
System top Safe as per EN ISO 10077-1. EN ISO 10077-2
1.63 W/m2K 1.70 W/m2K 1.60 W/m2K 1.63W/m2K 1.63 W/m2K 1.63 W/m2K 1.63 W/m2K
- awning blind
External accessories - roller shutter
Seals four thermal insulation of frame and glazing connection Ψ* 0.061 W/mK 0.047W/mK 0.064W/mK 0.074W/mK 0.074 W/mK 0.074 W/mK 0.074 W/mK
- ARF blackout blind as per EN ISO 10077-1. EN ISO 10077-2
Z-Wave module, actuator, power supply, remote control,
Factory equipment rain sensor - ARP roller blind
- ARS standard roller blind
Actuator chain reach 24 cm Internal accessories - AJP venetian blind * FAKRO internal test results
10 years for windows, 20 years for glazing unit, - APS pleated blind ** for the window width > 114 cm and height > 140 cm: npd
Warranty 20 years for hardware elements npd – no performance determined
- APF pleated blind
III. TECHNICAL PARAMETERS - AMS insect screen
Air permeability class 3 as per EN 1026, EN 12207
Wind load resistance class C5** as per EN 12210
Watertightness – unshielded (A) E900 as per EN 12208
Impact resistance class 3 (450mm) as per EN 13049
Applicability of glazing units U3, U5, P5, R1, P2, G2, G61
window internal area [m2] 0.32 0.41 0.51 0.62 0.62 0.75 0.91 1.05 0.93 1.12 1.15 1.38 1.12
2
effective glazing area [m ] 0.22 0.29 0.38 0.47 0.47 0.59 0.73 0.85 0.75 0.92 0.95 1.16 0.92
window weight for U3 glazing unit [kg]±1kg 21 26 28 32 32 36 41 45 40 46 49 53 46
air inlet capacity at a pressure difference of 17.28 17.28 23.34 23.34 27.89 27.89 27.89 27.89 27.89 27.89 49.08 49.08 49.08
10Pa [m3/h]
WINDOW TYPE FTS FTS-V WINDOW TYPE FTS FTS-V VII. TECHNICAL PARAMETERS FOR WINDOWS WITH PARTICULAR GLAZING UNIT TYPES
IV. OPTIONS Glazing unit type
Technical parameters
Standard type windows: FTS, FTS-V are manufactured only in standard version, U2
this also applies to glazing units Glazing structure 4H-16-4T
V. ADDITIONAL PRODUCTS TO BE USED glazing U-value 1.1 W/m2K
I. APPLICATION - standard, as per EN 673
window internal area [m2] 0.32 0.41 0.51 0.62 0.62 0.75 0.91 1.05 0.93 1.12 1.15 1.38 1.12
effective glazing area [m2] 0.22 0.29 0.38 0.47 0.47 0.59 0.73 0.85 0.75 0.92 0.95 1.16 0.92
window weight for U2 glazing unit [kg]±1kg 20 23 26 30 30 34 40 43 39 46 43 52 46
air inlet capacity at a pressure difference of 11.02 11.02 17.64 17.64 19.06 19.06 19.06 19.06 19.06 19.06 30.99 30.99 30.99
10Pa [m3/h]
WINDOW TYPE PTP PTP-V WINDOW TYPE PTP PTP-V VII. TECHNICAL PARAMETERS FOR WINDOWS WITH PARTICULAR GLAZING UNIT TYPES
IV. OPTIONS Glazing unit type
Technical parameters
- available in veneer colours: U3 U5 P5 R1 P2 G2 G61
Wooden profiles - golden oak (GO)
- pinewood (PI) Glazing structure 4H-16-4T 4HT-10-4H-10-4HT 4HS-10-4HT-8-33.2T 6H-12-33.2SIT 4H-15-33.2T 4HT-15-33.1T 6HT-12-33.2
- painted in colours of RAL spectrum glazing U-value
I. APPLICATION Cladding - cladding elements made of different types of sheet metal (CU, TC) as per EN 673
1.0 W/m2K 0.5 W/m2K 0.5 W/m2K 1.0 W/m2K 1.0 W/m2K 1.0 W/m2K 1.0 W/m2K
- non-standard size and shape of the window [cm] window U-value
installation angle 15°-90° 1.3 W/m2K 1.1 W/m2K 1.1 W/m2K 1.3 W/m2K 1.3 W/m2K 1.3 W/m2K 1.3 W/m2K
PTP U3: a (width)=50-134, b (height)=78-140 as per EN 12567-2
Installation PTP-V U3: a (width)=50-134, b (height)=78-140
universal installation system acoustic insulation Rw (the window with air inlet)
- window with black mullion bar and cladding as per EN ISO 717-1
32(-1;-4) 34(-2;-6) 36(-1,-3) 37(-1;-4) 33(-1;-4) 33(-1;-4) 37(-1;-4)
II. FEATURES V. ADDITIONAL PRODUCTS TO BE USED acoustic insulation Rw (the window without air inlet) 34(-2;-5) 34(-2;-5) 38(-1,-4) 39(-2;-5) 36(-1;-4) 36(-1;-4) 39 (-2;-5)
Material multi-chamber PVC profiles - standard, as per EN ISO 717-1
Flashings - special, light transmittance factor τV
Colour white (RAL 9010) white (RAL 9010) - combination as per EN 410
0.70 0.73 0.63 0.69 0.70 0.40 0.40
Varnishing – - electric solar factor g
Control - manual 0.53 0.53 0.48 0.52 0.52 0.23 0.23
as per EN 410
Air inlet type – V35 - insulation sets
- linings
UV radiation 0.26 0.28 0.01 0.01 0.01 0.01 0.01
Air inlet capacity – up to 41m3/h as per EN 410
Mounting accessories - auxiliary rafters
System top Safe - insulating band frame thermal insulation Uf* 1.56 W/m2K npd npd npd 1.42W/m2K npd npd
as per EN ISO 10077-1. EN ISO 10077-2
- frame extensions
Seals four
thermal insulation of frame and glazing connection Ψ*
- awning blind 0.051 W/mK npd npd npd 0.061 W/mK npd npd
Micro-opening facility + External accessories - roller shutter as per EN ISO 10077-1. EN ISO 10077-2
window internal area [m2] 0.32 0.41 0.51 0.62 0.62 0.75 0.91 1.05 0.93 1.12 1.15 1.38 1.12
2
effective glazing area [m ] 0.22 0.29 0.38 0.47 0.47 0.59 0.73 0.85 0.75 0.92 0.95 1.16 0.92
window weight for U3 glazing unit [kg]±1kg 23 26 30 34 34 37 43 50 44 50 50 60 50
air inlet capacity at a pressure difference of 15.05 15.05 20.59 20.59 25.32 25.32 25.32 25.32 27.55 27.55 40.97 40.97 40.97
10Pa [m3/h]
WINDOW TYPE FTT FTT/U WINDOW TYPE FTT FTT/U VII. TECHNICAL PARAMETERS FOR WINDOWS WITH PARTICULAR GLAZING UNIT TYPES
IV. OPTIONS Glazing unit type
Technical parameters
Wooden profiles for FTT - painted in colours of RAL spectrum U6 U8* R3
- painted in one of five Lazure colours
- painted in colours of RAL spectrum Glazing structure 6H-18-4HT-18-33.2T 4H-12-4HT-12-4HT-12-4HT 8H-16-4HT-18-33.2SIT
Cladding - cladding elements made of different types of sheet metal (CU, TC) glazing U-value 0.5 W/m2K 0.3 W/m2K 0.5 W/m2K
I. APPLICATION - window with black mullion bar and cladding as per EN 673
installation angle 15°-70° V. ADDITIONAL PRODUCTS TO BE USED window U-value 0.80 W/m2K 0.58 W/m2K 0.81 W/m2K
as per EN 12567-2
Installation universal installation system - standard,
on rafters and battens Flashings - special, acoustic insulation Rw 38(-1;-4) 36(-2;-5) 42(-2;-4)
as per EN ISO 717-1
II. FEATURES - combination
- electric light transmittance factor τV 0.62 0.66 0.62
Material pinewood, vacuum impregnated Control - manual as per EN 410
window internal area [m2] 0.41 0.51 0.62 0.62 0.75 0.91 1.05 0.93 1.12 1.15 1.38 1.12
effective glazing area [m2] 0.29 0.37 0.47 0.47 0.58 0.72 0.83 0.74 0.91 0.94 1.15 0.91
window weight with U6 glazing unit [kg] 34 40 46 46 53 62 70 63 72 75 87 69
window weight with U8 glazing unit U8 [kg] 34 40 46 46 53 62 70 63 72 75 87 69
without flashing ±1kg
WINDOW TYPE FTP/B WINDOW TYPE FTP/B VII. TECHNICAL PARAMETERS FOR WINDOWS WITH PARTICULAR GLAZING UNIT TYPES
IV. OPTIONS Glazing unit type
Technical parameters
- painted in colours of RAL spectrum Z6
Wooden profiles - painted in one of five Lazure colours
- in mahogany woodwork Glazing structure 4H-16-4HT
- painted in colours of RAL spectrum glazing U-value
I. APPLICATION Cladding - cladding elements made of different types of sheet metal (CU, TC) as per EN 673
1.1 W/m2K
installation angle 15°-90° V. ADDITIONAL PRODUCTS TO BE USED window U-value 1.4 W/m2K
as per EN 12567-2
Installation Flashings - special,
flashing supplied with window acoustic insulation Rw
- manual as per EN ISO 717-1
33(-1;-3)
Control - electric
II. FEATURES light transmittance factor τV
- insulation sets 0.81
Material pinewood, vacuum impregnated Mounting accessories - insulating band as per EN 410
window internal area [m2] 0.35 0.55 0.81 1.02 1.51 1.30
effective glazing area [m2] 0.24 0.42 0.65 0.84 1.29 1.10