Vous êtes sur la page 1sur 2

03/06/2019 Design for Bending for Rectangular Sections (Beams: BS 8110)

Home / Reference Guides / Concrete Design - BS 8110 / Beam Design to BS 8110 / Design for Bending (Beams: BS 8110) / Design for Bending for Rectangular
Sections (Beams: BS 8110)

Design for Bending for Rectangular Sections (Beams: BS 8110)


Calculate the value of K from;

K = M/(fcu*b*d2)      

Then calculate the limiting value of K, known as K’ from;  

K’ = (0.156)      

where          

M = design ultimate moment

fcu = characteristic strength of concrete

b = width or effective width of the section

IF K ≤ K’ THEN compression reinforcement is not required.  

Calculate the lever arm, z from;  

z = MIN{d*[ 0.5 + (0.25 – (K/0.9))0.5 ] ,0.95*d}

Calculate the depth to neutral axis, x from;  

x = (d-z)/0.45      

The area of tension reinforcement required, As,reqd is then given by;

As,reqd = M/(0.87*fy*z)      

IF K > K’ THEN compression reinforcement is required.

The area of compression reinforcement, A’s is then given by;

As’ = (K – K’) fcu*b*d2/ (f’s (d- d’))

Where          

As’ = area of compression reinforcement

d' = depth to the c of g of compression reinforcement

f’s = compression stress in steel

  = 0.87*fy if d’/d ≤ 0.5*{1 – (fy/800)}

  = Es*εc*{1- (2d’/d)} if d’/d > 0.5*{1 – (fy/800)}A

Where          

Es = the elastic modulus for steel = 2*105 N/mm2

εc = strain in concrete at the outermost compression fibre = 0.0035

https://teklastructuraldesigner.support.tekla.com/webhelps/tsd/2018i/All_Codes/Reference_Guides/BS_Concrete_Member_Design_Handbook/Beam_Design/De… 1/2
03/06/2019 Design for Bending for Rectangular Sections (Beams: BS 8110)
Calculate the lever arm, z from;  

z = MIN{d*[0.5 + (0.25 – (K’/0.9))0.5], 0.95*d}

The total area of tension reinforcement required is given by;  

As,reqd = (K’*fcu*b*d2) / (0.87*fy*z) + As’

A Book of A.H.Allen “Reinforced Concrete Design To BS 8110” section 5.2.2

 
Parent topic                
•  Design for Bending
 
 
 

https://teklastructuraldesigner.support.tekla.com/webhelps/tsd/2018i/All_Codes/Reference_Guides/BS_Concrete_Member_Design_Handbook/Beam_Design/De… 2/2

Vous aimerez peut-être aussi