Académique Documents
Professionnel Documents
Culture Documents
1 2 3 4 5 6 7 8 = 192.168.0.1
Top-mounted ON
Accessories Checklist
Bottom-mounted Interface The following items are required for installation:
IP Address Configuration Switches • Modbus-TCP configuration tool (optional, not included)
X2.1 X2.2 • USB cable (included)
GW Status
LINK 1 (X1.1) • LAN cable (not included)
MS
NS Installation and Startup Summary
1 2 3 4 5 6 7 8 LINK 2 (X1.2)
ON (Depending on your setup, some steps may not be required.)
GW Status
1. Connect the gateway to the network
LINK 1 (X2.1)
MS 2. Set a valid IP address for the interface
NS (contact your network administrator for information)
LINK 2 (X2.2)
3. Connect a PC to the gateway via USB
4. Power up and configure the gateway
USB USB
(X4) (X4)
Modbus-TCP Connector
Pin Signal Bottom-mounted
1 TD+
2 TD-
3 RD+
1 8 4, 5, 7, 8 Termination to PE
6 RD-
Technical Support
Technical support, documentation and software downloads are
available at www.anybus.com.