Académique Documents
Professionnel Documents
Culture Documents
73q
Number: C9060-528
Passing Score: 800
Time Limit: 120 min
https://www.gratisexam.com/
C9060-528
https://www.gratisexam.com/
Exam A
QUESTION 1
How is the amount of client data backed up during the last 24 hours determined?
https://www.gratisexam.com/
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUERY OCCUPANCY (Query client file spaces in storage pools)
Use this command to show where client file spaces are stored and how much space they occupy.
Incorrect Answers:
B: The query backup command displays a list of backup versions of your files that are stored on the IBM Spectrum Protect server, or that are inside a backup set
from the server when the backupsetname option is specified.
References: https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.3/srv.reference/r_cmd_occupancy_query.html
QUESTION 2
Which file is used to add a system-wide client option on an IBM Spectrum Protect client in a Windows environment?
A. dsmsys.opt
B. dsm.sys
C. dsmopt.sys
D. dsm.opt
Correct Answer: D
https://www.gratisexam.com/
Section: (none)
Explanation
Explanation/Reference:
Use the SET SUBFILE (Set subfile backup for client nodes) command to set up the server to allow clients to back up subfiles. On the client's workstation, the
SUBFILECACHEPATH and SUBFILECACHESIZE options must be specified in the client's options file (dsm.opt). If you are using a Windows client, you must also
specify the SUBFILEBACKUP option.
References: IBM Spectrum Protect for Windows Version 8.1.0, Administrator's Reference, p 1279
QUESTION 3
What is the purpose of POSTSCHEDULECMD option is the IBM Spectrum Protect backup-archive client option file?
A. specifies the number of times the schedule needs to be run after a first successful completion
B. specifies a command that the client program processes after it runs any schedule
C. specifies any delay in seconds of the scheduled action
D. specifies the command to run for stopping the scheduler service if it receives an error
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
The postschedulecmd/postnschedulecmd option specifies a command that the client program processes after it runs a schedule.
If you want the client program to wait for the command to complete before it continues with other processing, use the postschedulecmd option. If you do not want to
wait for the command to complete before the client continues with other processing, specify the postnschedulecmd.
References: IBM Spectrum Protect for Windows Backup-Archive Clients: Installation and User's Guide, Version 8.1.0, p 464
QUESTION 4
What are the correct steps for moving the database to new directories?
A. stop the server, create the new directories, restart the server from the newly created directories
B. back up database, create new directories, remove the database, and restore the database with option ON
C. back up database, create new directories, and restore the database with option REPLACE
D. stop the server, create new directories, move files from old location to the new location, and restart the server
Correct Answer: B
Section: (none)
https://www.gratisexam.com/
Explanation
Explanation/Reference:
DSMSERV RESTORE DB (Restore a database to a point-in-time) command is used to restore a database to a point in time. A volume history file and a device
configuration file must be available.
The option On specifies a file that lists the directories to which the database is restored.
References: https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.2/srv.reference/r_cmd_dsmserv_restore_db_pit.html
QUESTION 5
Which operation runs as part of the PROTECT STGPOOL process?
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
As part of the PROTECT STGPOOL operation, processes might run to repair damaged extents in the target server's storage pool. The repair operation occurs
under the following conditions:
Both the source server and the target server must be at V7.1.5 or later.
Extents that are already marked as damaged on the target server are repaired.
The repair process does not run an audit process to identify damage.
-Only target extents that match source extents are repaired. Target extents that are damaged but have no match on the source server are not repaired.
References: IBM Spectrum Protect for Windows Version 8.1.0, Administrator's Reference, p 706
QUESTION 6
The use of deduplication processing in deduplication type storage pools requires more of which IBM Spectrum Protect server resource?
https://www.gratisexam.com/
B. IBM Spectrum Protect client memory
C. TCP/IP bandwidth between the client and the server
D. IBM Spectrum Protect client sessions
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 7
To enable the sending of email notifications with SET ALERTMAIL ON, what must be configured first?
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
For each administrator ID that must receive email notification, issue one of the following commands to activate email notification and to specify the email address:
REGISTER ADMIN admin_name ALERT=YES EMAILADDRESS=email_address
Or
UPDATE ADMIN admin_name ALERT=YES EMAILADDRESS=email_address
References: https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.0/srv.install/t_oc_inst_email_configure.html
QUESTION 8
Which command scans for inconsistencies between database information and a container in a directory-container storage pool?
A. QUERY DAMAGE
B. AUDIT CONTAINER
C. QUERY CONTAINER F=D
D. AUDIT STGPOOL
https://www.gratisexam.com/
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
AUDIT CONTAINER (Verify the consistency of database information for a directory container)
Use this command to scan for inconsistencies between database information and a container in a directory-container storage pool.
Incorrect Answers:
A: QUERY DAMAGED (Query damaged data in a directory-container or cloud-container storage pool)
Use this command to display information about damaged data extents in a directory-container or cloud-container storage pool. Use this command together with the
AUDIT CONTAINER command to determine a recovery method for the damaged data.
References: https://www.ibm.com/support/knowledgecenter/en/SSGSG7_7.1.3/srv.reference/r_cmd_container_audit.html
QUESTION 9
Which option in the dsmserv.opt specifies the location of the active log directory?
A. ACTIVELOGDIRECTORY
B. ARCHFAILOVERLOGDIRECTORY
C. ACTLOGDIRECTORY
D. ARCHIVELOGDIRECTORY
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
ACTIVELOGDIRECTORY
The new directory for the location where the active log is stored. Use this option to change the location of the active log.
References: IBM Spectrum Protect for Windows Version 8.1.0, Administrator's Reference, p 1571
QUESTION 10
In addition to the activity log, which other log would be useful for diagnosing a device error on a Windows system?
https://www.gratisexam.com/
https://www.gratisexam.com/
A. event log
B. dsmsched.log
C. errpt
D. webcl.log
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Windows event log is a record of a computer's alerts and notifications. Microsoft defines an event as "any significant occurrence in the system or in a program that
requires users to be notified or an entry added to a log."
Incorrect Answers:
B: Output from scheduled commands is sent to the scheduler log file (dsmsched.log). After the scheduled work completes, check the log to ensure that the work
completed successfully.
QUESTION 11
On an IBM Spectrum Protect Windows server, which utility can be used to identify disk bottlenecks?
A. monitor
B. perfstat
C. perform
D. nmon
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
https://www.gratisexam.com/
QUESTION 12
What are the steps to configure the Mail Server for Operations Center?
A. on the Operations Center menu bar, click Configure Mail Server and complete the fields
B. on the Operations Center menu bar, click Reports; then click Configure Mail Server and complete the fields
C. on the Operations Center menu bar, click Reports; then click Define Mail Server and populate the fields with a valid email address
D. on the Operations Center menu bar, click Reports; then select a report, click Details, and update the form to specify an email address
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
To set up and manage email reports, complete the following steps:
On the Operations Center menu bar, click Reports.
If an email server connection is not yet configured, click Configure Mail Server and complete the fields. After you configure the mail server, the general
operations report and license compliance report are enabled.
References: https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.0/srv.admin/t_adm_mon_oc_email_report_setup.html
QUESTION 13
Which alert type is displayed in the Operations Center when a scheduled node backup fails?
A. a missed icon
B. a failed icon
C. an unprotected icon
D. an at-risk icon
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
The Overview page of the Operations Center includes the section:
TSM Clients
A client is considered to be at risk if a problem occurs during its most recent scheduled backup, or during a backup that starts within a specified time interval. The
term backup also includes archive operations for Tivoli Storage Manager for Enterprise Resource Planning clients.
Use the information that is shown in the TSM Clients section to check for failed or missed backups and to determine whether backup schedules are running as
expected.
https://www.gratisexam.com/
References: https://www.ibm.com/support/knowledgecenter/en/SSGSG7_7.1.0/com.ibm.itsm.srv.doc/c_oc_srv_opcenter_overview.html
QUESTION 14
Which two statements are true regarding the client acceptor-managed services? (Choose two.)
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
The client acceptor service starts and stops the scheduler process as needed for each scheduled action.
It requires fewer system resources when idle.
Incorrect Answers:
C: The client acceptor daemon is started with the dsmcad command.
References: https://www.ibm.com/support/knowledgecenter/en/SSGSG7_7.1.1/com.ibm.itsm.client.doc/c_cfg_sch_compare.html
QUESTION 15
Which two components are selectable on the IBM Spectrum Protect server installation? (Choose two.)
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
By using the IBM Spectrum Protect installation software, you can install the following components:
https://www.gratisexam.com/
Server
server languages
license
devices
IBM Spectrum Protect for SAN
Operations Center
Incorrect Answers:
C, D: The database (DB2), the Global Security Kit (GSKit) and IBM Java Runtime Environment (JRE) are automatically installed when you select the server
component.
References: https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.0/srv.install/t_srv_upgrd63_71_inst.html
QUESTION 16
On an IBM Spectrum Protect Windows server, a data migration has failed with a tape device error. Which output should be reviewed to get detailed error
information?
A. event log
B. dsmerr
C. errpt
D. actlog
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
dsmerror.log (dsmerr) is the IBM Spectrum Protect client error log.
Incorrect Answers:
A: Note that less detailed error and informational messages are written to the Windows application event log as well.
C: Review error logs for the operating system to find errors that can affect the server. For example, for AIX systems use the errpt command to view errors.
D: The activity log, actlog, contains all messages that are sent to the server console under normal operation
QUESTION 17
An IBM Spectrum Protect Storage Agent and Client are installed on the same physical machine. Which COMMMETHOD option should improve performance?
A. SHAREDMEM
https://www.gratisexam.com/
B. COMPSERIAL
C. TCPIP
D. NAMEDPIPE
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
SHAREDMEM specifies the shared memory communication method option. This method uses the same area of memory to send data between several applications
at the same time. Both the server and the backup-archive client must be configured to support the shared memory communication method, and they must be
installed on the same computer.
References: IBM Spectrum Protect for Windows Version 8.1.0, Administrator's Reference, p 1691
QUESTION 18
What is the command to verify the correct installation of client management services?
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 19
Which server option automatically updates the physical device file on the IBM Spectrum Protect library and drive paths?
A. SANDISCOVERY ON
B. SANDISCOVERY AUTO
C. SANDISCOVERY ACTIVE
D. SANDISCOVERY OFF
Correct Answer: A
https://www.gratisexam.com/
Section: (none)
Explanation
Explanation/Reference:
ON Specifies that the server completes SAN discovery when the device path is changed, or when the QUERY SAN command is issued.
Incorrect Answers:
D: OFF
Specifies that the server does not complete SAN discovery when the device path is changed, or when the QUERY SAN command is issued. If the IBM Spectrum
Protect server is not able to open a device, a message is issued but the path that is associated with the device is not taken offline. This value is the default.
References: IBM Spectrum Protect for Windows Version 8.1.0, Administrator's Reference, p 1671
QUESTION 20
To which policy type definition does the following sample policy retention information apply?
A. archive copygroup
B. backup copygroup
C. backup and archive copygroups
D. space management copygroup
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
References: https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.0/srv.reference/r_cmd_copygroup_query.html
https://www.gratisexam.com/
QUESTION 21
Which component of IBM Spectrum Protect defines the data migration rules for Space Management for UNIX files?
A. copy group
B. management class
C. node
D. policy sets
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
A management class indicates a storage policy for a file. The storage policy determines whether a file can be migrated and how the migrated copy is stored.
References: https://www.ibm.com/support/knowledgecenter/SSERBH_8.1.0/hsmul/b_hsm_guide_unx_lnx.pdf, p 24
QUESTION 22
There are two servers, server1 and server2. What is enabled when the command, SET DISSIMILARPOLICIES SERVER2 ON is issued on server1?
A. It enables the use of more than one server1 policy for management of replicated data on server2.
B. It enables server1 to manage replicated data on server2.
C. It enables the policies on server2 to be used for management of replicated data from server1.
D. It enables exporting policies from server1 to server2 so they can be used for management of replicated data.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Use the SET DISSIMILARPOLICIES command to enable the policies that are defined on the target replication server to manage replicated client-node data. If you
do not use the policies on the target replication server, replicated client-node data is managed by policies on the source replication server.
ON specifies that replicated client-node data is managed by the policies that are defined on the target replication server.
Syntax:
Read syntax diagramSkip visual syntax diagram
.-OFf-.
>>-Set DISSIMILARPolicies--target_server_name--+-----+---------><
https://www.gratisexam.com/
+-OFf-+
'-ON--'
References: https://www.ibm.com/support/knowledgecenter/en/SSGSG7_7.1.6/srv.reference/r_cmd_dissimilarpolicies_set.html
QUESTION 23
Which three values can be adjusted with the Alerts Retention settings in the Operations Center? (Choose three.)
https://www.gratisexam.com/
Explanation/Reference:
B: Choose one of the following options to define when an alert in the closed state is deleted from the Tivoli Storage Manager server:
Delete the alert as soon as its state is changed to closed.
Delete the alert after it is in the closed state for a defined time interval.
F: From the Operations Center, you can change the alert state from active to inactive.
Incorrect Answers:
E: If the message that triggered the alert does not recur within the defined time interval for the inactive state, the alert is changed from inactive to closed state.
References: https://www.ibm.com/support/knowledgecenter/en/SSGSG7_7.1.1/com.ibm.itsm.srv.doc/c_oc_srv_alerts_ovw.html
QUESTION 24
Which command is used to display the last complete backup Date/Time of the IBM Spectrum Protect Database?
https://www.gratisexam.com/
A. QUERY DBSPACE
B. QUERY DB F=D
C. LIST DATABASE ALL
D. SHOW DBINFO
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
To display detailed statistical information about the database. Issue the command:
query db format=detailed
or QUERY DB F=D
Out sample:
Database Name: TSM_DB2
Total Space of File System (MB): 1,748,800
Space Used on File System (MB): 2,304,355
Space Used by Database (MB): 448
Free Space Available (MB): 235,609
Total Pages: 32,776
Usable Pages: 32,504
Used Pages: 24,220
Free Pages: 8,284
Buffer Pool Hit Ratio: 99.3
Total Buffer Requests: 204,121
Sort Overflows: 0
Package Cache Hit Ratio: 89.8
Last Database Reorganization: 05/25/2009 16:44:06
Full Device Class Name: FILE
Number of Database Backup Streams: 4
Incrementals Since Last Full: 0
Last Complete Backup Date/Time: 05/18/2009 22:55:19
Compress Database Backups: Yes
Protect Master Encryption Key: No
Incorrect Answers:
A: QUERY DBSPACE (Display database storage space)
Use this command to display information about the directories used by the database to store data.
https://www.gratisexam.com/
Example: Display database storage space information
Display information about database storage space. Issue the command:
query dbspace
Location Total Space of Used Space on Free Space
File System (MB) File System (MB) Available (MB)
------------------ ---------------- --------------- ---------------
d:\tsm\db001 1,748,800 1,513,191.125 117,804.422
e:\tsm\db002 1,748,800 1,513,191.125 117,804.422
References: https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.2/srv.reference/r_cmd_db_query.html
QUESTION 25
An IBM Spectrum Protect administrator suspects that at least one their tape drives has failed. Which command can be used to check that tape drives are available
and working?
A. Q DRIVESTATUS FORMAT=DETAILED
B. Q DRIVE LIBNAME DRIVENAME FORMAT=DETAILED
C. Q DRIVES ALL FORMAT=DETAILED
D. Q LIBNAME DRIVE=DETAILED
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
On the IBM Spectrum Protect server, issue the QUERY DRIVE FORMAT=DETAILED command to obtain the worldwide name (WWN) and serial number for the
drive that will be connected to the NAS file server.
References: https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.0/srv.admin/t_ndmp_drive_path_defining_nastsm.html
QUESTION 26
Which two LAN-free client options should be considered when attempting to tune restore performance? (Choose two.)
A. txngroupmax
B. diskbuffsize
C. resourceutilization
D. tcpbytelimit
E. tcptxntime
Correct Answer: AD
https://www.gratisexam.com/
Section: (none)
Explanation
Explanation/Reference:
The following options are designed to control the transaction size for a Tivoli Storage Manager client/server session for the backup-archive client:
txngroupmax
The txngroupmax option specifies the maximum number of objects (files and directories) that are included in a client session transaction. For Tivoli Storage
Manager 5.2 and later, this option is set globally for the Tivoli Storage Manager server and can be set individually for each node by issuing the UPDATE NODE
command.
txnbytelimit
The txnbytelimit option specifies the maximum object size in KB that is included in a client session transaction. A single file exceeding this size is always processed
as a single transaction.
References: http://www.tsmtutorials.com/2013/04/performance-tuning-tips-in-tivoli.html
QUESTION 27
Which information is provided to the IBM Spectrum Protect administrator by the QUERY DRMEDIA * WHERESTATE=MOUNTABLE?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUERY DRMEDIA (Query disaster recovery media)
Use this command to display information about database backup volumes, and volumes in copy storage pools, container-copy storage pools, and active-data
storage pools. You can also use the command to create a file of executable commands to process the volumes.
References: IBM Spectrum Protect for Windows Version 8.1.0, Administrator's Reference, p 661
QUESTION 28
Under which two conditions would client-side deduplication and compression be configured?
https://www.gratisexam.com/
A. to minimize network traffic to the IBM Spectrum Protect client
B. to minimize compute resources on the IBM Spectrum Protect server
C. to minimize network traffic to the IBM Spectrum Protect server
D. to improve restore times
E. to minimize compute resources on the IBM Spectrum Protect client
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
Data deduplication is a method of reducing storage needs by eliminating redundant data. Client-side data deduplication is the process of removing the redundant
data during a backup operation on the client system. Client-side data deduplication is especially effective when you want to conserve bandwidth between the IBM
Spectrum Protect client and server.
References: https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.0/perf/t_client_tuning_dedup.html
QUESTION 29
Configure IBM Spectrum protect backup-archive client to use journal based backup. The configuration is written to which file?
A. protect-journalbbd.ini
B. spectrumprotect-journalbbd.ini
C. journalbbd.ini
D. tsmjbbd.ini
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
On Windows, the journal service configuration file is called tsmjbbd.ini.
References: http://www.tsmtutorials.com/2013/04/how-to-configure-journal-based-backup.html
QUESTION 30
How does an administrator check on the status of completed node-replication processes?
https://www.gratisexam.com/
B. from the Replication tab in Operations Center
C. use QUERY REPLICATION command on the target server
D. use QUERY REPLSERVER command on either target or source server
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUERY REPLICATION displays information about node replication processes.
Issue this command on the server that acts as a source for replicated data.
References: IBM Spectrum Protect for Windows Version 8.1.0, Administrator's Reference, p 937
QUESTION 31
How is data for a group of client nodes, a single client node, or a client filespace placed on as few volumes as possible?
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
A collocation group is a group of nodes or file spaces on a node whose data is collocated on a minimal number of sequential access volumes.
References: https://www.ibm.com/support/knowledgecenter/en/SSGSG7_7.1.6/srv.reference/r_cmd_collocgroup_define.html
QUESTION 32
How does an IBM Spectrum Protect administrator ensure that only the IBM Spectrum Protect server will start scheduled sessions with clients?
A. SESSIONINITIATION PROMPTED
B. SESSIONINITIATION CLIENTORSERVER
C. SESSIONINITIATION SERVERONLY
D. SESSIONINITIATION POLLING
https://www.gratisexam.com/
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
SESSIONINITiation controls whether the server or the client initiates sessions. The default is that the client initiates sessions.
SERVEROnly specifies that the server does not accept client requests for sessions.
References: IBM Spectrum Protect for Windows Version 8.1.0, Administrator's Reference, p 1090
QUESTION 33
What does the LANFREECOMMMETHOD option allows a client system to do?
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
To improve backup and restore performance, include lanfreecommmethod shardemem in the client options file if the storage agent and client are on the same
system. Setting this option allows the IBM Spectrum Protect client and IBM Spectrum Protect storage agent to communicate by using RAM, instead of using TCP/
IP.
References: https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.0/perf/c_perf_lanfree.html
QUESTION 34
Which component will need to be updated to adjust the retention policy for a set of backup clients?
Correct Answer: A
Section: (none)
https://www.gratisexam.com/
Explanation
Explanation/Reference:
There are essentially two distinct retention policies which can be configured in SSAM as part of the archive copy group: chronological and event based. The
retention policy is configured using the archive copy group parameters RETINIT, RETMIN and RETVER.
References: File Archiving Solution with IBM Spectrum Protect for Data Retention (SSAM), Introduction, Configuration and Usage, p 9
QUESTION 35
Which file must be edited to configure Disaster Recovery Manager?
A. RECOVERY.INSTRUCTIONS.STORAGE
B. RECOVERY.INSTRUCTIONS.INSTALL
C. RECOVERY.INSTRUCTIONS.TAPE
D. RECOVERY.INSTRUCTIONS.PRIMARY
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Disaster Recovery Manager configurations include:
RECOVERY.INSTRUCTIONS.INSTALL - for TSM server installation. It contains instructions such as passwords, hardware/software requirements, fix levels, and so
on.
References: ftp://ftp.software.ibm.com/linux/bpresource/redbooks/SG246844.pdf
QUESTION 36
What is the purpose of specifying the option ENABLEDEDUPCACHE YES on the client?
A. to reduce the load on the client during client backup or archive deduplication processing
B. to provide a cached copy on the local client system of all objects that are sent to a storage pool during client backup or archive deduplication processing
C. to ensure that the client uses the server database index to identity extents that need to be sent to the server during client backup or archive processing
D. to create a reference database on the client that is used to identify data extents that have already been sent to the server during client backup or archive
processing
Correct Answer: A
Section: (none)
Explanation
https://www.gratisexam.com/
Explanation/Reference:
Use the enablededupcache option to specify whether you want to use a cache during client-side data deduplication. Using a local cache can reduce network traffic
between the IBM Spectrum Protect server and the client.
References: https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.0/client/r_opt_enablededupcache.html
QUESTION 37
Which client function allows management of a set of related files on different file systems, that have the same backup, restore, and server policies?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Policy sets contain management classes (which contain copy groups) that determine the rules by which Data Protection for SQL Server backups are performed and
managed.
Define the policy set to the policy domain to which Data Protection for SQL Server backups belong. The policy set must be activated and only one policy set can be
active in the policy domain.
Incorrect Answers:
C: A copy group controls how backup versions are generated, located, and expired.
References: https://www.ibm.com/support/knowledgecenter/en/SSER7G_8.1.2/db.sql/r_dpsql_recommend_policy_settings.html
QUESTION 38
What is the purpose of the UPDATE NODE <nodename> BKREPLRULEDEFAULT=<new rule name> server command?
A. update the node settings by changing the default replication rule for Space Management data
B. update the node settings by changing both the default replication rule for backing up and archiving data
C. update the node settings by changing the default replication rule for archiving data
D. update the node settings by changing the default replication rule for backing up data
Correct Answer: D
Section: (none)
https://www.gratisexam.com/
Explanation
Explanation/Reference:
BKREPLRuledefault specifies the replication rule for backup data.
ARREPLRuledefault specifies the replication rule for archive data.
SPREPLRuledefault specifies the replication rule for space-managed data.
References: IBM Spectrum Protect for Windows Version 8.1.0, Administrator's Reference, p 1091
QUESTION 39
What is a prerequisite when using multiple data streams for backup and restore of the IBM Spectrum Protect server database?
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
To run eight reclamation processes simultaneously, you need a total of at least 16 mount points and 16 drives. The device class for the two storage pools must
have a mount limit of at least 16.
References: IBM Spectrum Protect for Windows Version 8.1.0, Administrator's Reference, p 1518
QUESTION 40
A large filesystem will be restored. Backup data is spread across one hundred tapes and all four tape drives are currently used. What can be done to optimize the
restore process?
https://www.gratisexam.com/
A. update the client to use more mount points for the restore
B. tune the client option, resource utilization
C. set up more parallel restore sessions
https://www.gratisexam.com/
D. use MOVE NODEDATA to consolidate data on a disk pool
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
To run eight reclamation processes simultaneously, you need a total of at least 16 mount points and 16 drives. The device class for the two storage pools must
have a mount limit of at least 16.
References: IBM Spectrum Protect for Windows Version 8.1.0, Administrator's Reference, p 1518
QUESTION 41
Which backup function is run on the client so that an incremental backup does not need to query the IBM Spectrum Protect server to determine while files to back
up?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.0/client/r_cmd_incremental.html
QUESTION 42
Which statement is true regarding LAN-free?
Correct Answer: B
Section: (none)
Explanation
https://www.gratisexam.com/
Explanation/Reference:
QUESTION 43
Which option allows data to be stored offsite as part of a Disaster recovery plan?
A. System Replication
B. Tape Replication
C. Server Replication
D. Node Replication
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 44
How are IBM Spectrum Protect activities, such as server migration and client logons, monitored in realtime?
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.ibm.com/support/knowledgecenter/en/SSGSG7_6.3.4/com.ibm.itsm.srv.doc/b_srv_admin_guide_aix.pdf
QUESTION 45
Which two secure communication protocols can be used for server-client communication? (Choose two.)
https://www.gratisexam.com/
C. Transport Security Protocol (TSP)
D. Secured Shared Memory (SSM)
E. Transport Layer Security (TLS)
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.4/srv.solutions/c_tape_ops_sec_ovr.html
QUESTION 46
A start shift review of the overview page of the Operations Center shows the Archive log space is reaching full capacity. In addition to increasing the log space, what
else can be performed to release the log space capacity?
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 47
What happens if an administrator deletes a management class in an IBM Spectrum Protect server?
Correct Answer: A
Section: (none)
Explanation
https://www.gratisexam.com/
Explanation/Reference:
QUESTION 48
Which information is provided by the command QUERY DRMSTATUS regarding the Disaster Recovery Manager (DRM)?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.0/srv.reference/r_cmd_drmstatus_query.html#r_cmd_drmstatus_query
QUESTION 49
What is the purpose of the client management service (CMS)?
A. It is software that runs on the server in order to collect remotely the licensing information from the client nodes.
B. It enables administrators to view and understand client problems remotely using the IBM Spectrum Protect Operations Center.
C. It enables administrators to view and understand client problems remotely using the Operating Systems log files.
D. It is software that runs on the Operations Center in order to view and understand storage problems remotely.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 50
Which three methods can be used to install an IBM Spectrum Protect server in a Linux environment? (Choose three.)
https://www.gratisexam.com/
D. The new DSMSERV INSTALL command
E. Silent mode
F. The installation wizard
Explanation/Reference:
Reference: https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.0/srv.install/b_srv_install_guide_linux2.pdf
QUESTION 51
Unless DIRMC client option is used, which IBM Spectrum Protect server retention is associated with directories for backup objects?
A. The backup copy group retention within the default management class
B. The longest retentions specified within the active policy set
C. The archive copy group retention in the client’s management class
D. The retention specified for the data files within the client’s directory
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 52
IBM Spectrum Protect backup-archive client can be configured to use deduplication on the client side.
A. DEDUPLication YES
B. DEDUPLication NO
C. DEDUPLication ON
D. DEDUPLication Server-Client
Correct Answer: A
Section: (none)
Explanation
https://www.gratisexam.com/
Explanation/Reference:
Reference: https://www.ibm.com/support/knowledgecenter/en/SSGSG7_7.1.6/client/c_dedup.html
QUESTION 53
Which kind of messages are logged in to the dsmsched.log client file?
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.0/tshoot/b_problem_deter_guide2.pdf (p.15)
QUESTION 54
An administrator wants to give a new administrator permission to only modify retention setting for all policies in a domain including new policies. What must
happen?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 55
What is the purpose of the PROTECTSTGPOOL parameter in the DEFINE STGPOOL command?
A. To identify the copypool used when issuing the PROTECT STGPOOL command for a directory container
https://www.gratisexam.com/
B. To identify the target storage pool for client data replication
C. To specify the target container pool that is used when issuing the PROTECT STGPOOL command
D. To specify the target container pool that is used to protect a cloud-container storage pool
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.ibm.com/support/knowledgecenter/en/SSGSG7_7.1.6/srv.reference/r_cmd_stgpool_cont_define.html
QUESTION 56
What does the replication workload status in the IBM Spectrum Protect Operation Center show?
A. The amount of data to be transferred to synchronize the source and target server
B. The amount of resources being used to transfer data between the source and target
C. The number of the sessions being used to transfer data between the source and target
D. The number of nodes to be transferred between the source and target
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 57
What is the purpose of the command, DEFINE LIBRARY LIBRARY_NAME LIBTYPE=SCSI SHARED=YES?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
https://www.gratisexam.com/
Reference: http://emmanuel.iffly.free.fr/doku.php?id=tsm:tsm_libr_error
QUESTION 58
What are the two ways to display the amount of log usage in an IBM Spectrum Protect Server V8.1 server? (Choose two.)
A. SHOW LOGSPACE
B. DSMSERV DISPLAY LOG
C. DSMSERV QUERY LOGSPACE
D. SHOW LOG
https://www.gratisexam.com/
E. QUERY LOG
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 59
What are the two backup types available to back up NAS file systems using the web client GUI? (Choose two.)
A. Differential
B. Incremental
C. Journal backup
D. Full backup
E. Partial path
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
https://www.gratisexam.com/
Reference: https://webcache.googleusercontent.com/search?q=cache:vnU7pl0iT34J:https://www.ibm.com/support/knowledgecenter/en/SSGSG7_6.4.0/
com.ibm.itsm.client.doc/c_bac_webclient.html+&cd=1&hl=en&ct=clnk&gl=pk&client=opera
QUESTION 60
An IBM Spectrum Protect administrator issues the VALIDATE POLICYSET command and it fails. What would cause this?
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.0/srv.reference/r_cmd_policyset_validate.html
QUESTION 61
Which backup-archive client parameter allows the client to connect to the server without prompting for a password?
A. PASSWORD optional
B. PASSWORDAccess generate
C. PASSWORDADMIN generate
D. PASSWORDFile-=/opt/Tivoli/tsm/client/ba/bin/TSM.PWD
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.ibm.com/support/knowledgecenter/en/SSGSG7_7.1.2/com.ibm.itsm.client.doc/r_opt_passwordaccess.html
QUESTION 62
When the size of the active log is increased in the dsmserv.opt, which action is necessary to make the additional space available for use?
https://www.gratisexam.com/
D. Halt and restart the server
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 63
How can an administrator determine when the IBM Spectrum Protect server database backup starts?
A. Configure IBM Spectrum Protect to send a page when the backup database begins
B. Configure IBM Spectrum Protect to pop up a display when the backup database begins
C. Configure IBM Spectrum Protect to play a sound when the backup database begins
D. Configure IBM Spectrum Protect to send an e-mail alert when the backup database begins
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 64
What are three purposes of IBM Spectrum Protect for Mail for Exchange? (Choose three.)
A. Provides full recovery of Microsoft Exchange email only by Search capabilities and by using Microsoft backup APIs
B. Uses custom APIs provided by vendor to perform offline and online backups of Microsoft Exchange clients
C. By using Microsoft backup API, it provides the possibility to back up Exchange Server only when they are in DAG configuration
D. Uses Microsoft backup APIs to create a copy of Exchange server storage group databases and the associated transaction logs
E. Uses APIs provided by vendors to perform online hot backups and improve restores without shutting down the email application
F. Provides item-level recovery of Microsoft Exchange email object by Search capabilities
Explanation/Reference:
https://www.gratisexam.com/
QUESTION 65
What is the difference between deduplication performed on sequential access (FILE) storage pools and deduplication of data written to container storage pools?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 66
Which two types of files can be consistently backed up using the backup-archive client with Open File Support (OFS) configured? (Choose two.)
A. Deleted
B. In use
C. Corrupt
D. Expired
E. Open
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.ibm.com/support/knowledgecenter/en/SSGSG7_7.1.2/com.ibm.itsm.client.doc/c_bac_ofs.html
QUESTION 67
A power outage has caused a library to go offline unexpectedly. Which command synchronizes the library inventory and the IBM Spectrum Protect database?
A. RECONCILE LIBRARY
B. CHECKOUT LIBRARY
C. AUDIT LIBRARY
https://www.gratisexam.com/
D. SYNCH LIBRARY
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.3/srv.reference/b_srv_admin_ref_aix.pdf
QUESTION 68
For IBM Spectrum Protect Disaster Recovery Manager (DRM), what is the order of maintenance tasks which are run to complete the DRM sequence daily?
A. PREPARE
DELETE VOLHIST
MOVE DRMEDIA
B. DELETE VOLHIST
MOVE DRMEDIA
PREPARE
C. MOVE DRMEDIA
PREPARE
DELETE VOLHIST
D. PREPARE
MOVE DRMEDIA
DELETE VOLHIST
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 69
What is the purpose of the following command on the source server for the node named Lapis?
VALIDATE REPLICATION LAPIS VERIFYCONNECTION=YES
A. It validates the domain name used for the node and verifies the communication method being used between the source and target servers.
B. it validates the replication configuration and verifies that the source replication server can communicate with the target replication server.
C. It validates the date and time that node was last replicated and that is has a connection with the source server.
https://www.gratisexam.com/
D. It validates and activates the policyset that is used for the node that is being replicated and verifies that the server name and server password are valid.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.ibm.com/support/knowledgecenter/en/SSGSG7_7.1.6/srv.reference/r_cmd_replication_validate.html
QUESTION 70
A customer has the COMPRESSALWAYS YES option set in their IBM Spectrum Protect client. Which option in the IBM Spectrum Protect client can be used to
improve performance of backups form systems where some data is not compressible?
A. DISABLECOMPRESSIONONGROWTH YES
B. COMPRESSNEVER YES
C. EXCLUDE.COMPRESSION
D. COMPRESSALWAYS CLIENT
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 71
What are two functions of an IBM Spectrum Protect enterprise management configuration? (Choose two.)
A. Managed Server
B. Config Manager
C. Replication Target
D. Replication Manager
E. Replication Source
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
https://www.gratisexam.com/
QUESTION 72
An administrator wants to create an IBM Spectrum Protect administrator that can only access a specific node through the web backup-archive client and the local
backup-archive client. Which access should be granted?
A. System authority
B. Node owner authority
C. Node access authority
D. Node Operator authority
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 73
What is the command to run on the source server for checking the replication rules set on the system?
A. QUERY REPLNODERULE
B. QUERY REPLRULE
C. QUERY NODE RULES=SHOWALL
D. QUERY RULESRPL
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.2/srv.reference/r_cmd_node_replicate.html
https://www.gratisexam.com/
https://www.gratisexam.com/
https://www.gratisexam.com/