Académique Documents
Professionnel Documents
Culture Documents
CHAPTER - 1 : EARTHWORK
EARTHWORK WITH DEFINED LEAD
011030 Extra over items 011010 for spreading and 1 cum 145.70
finishing of fill material on embankment by
manual means in accordance with specifications
011051 Extra for lead of earth work above initial lead of 1 cum 12.85
50m, in all kind of soils and rocks :
- for every 50 m or part thereof - lead over 50m
and upto 150m
011052 Extra for lead of earth work above initial lead of 1 cum 10.10
50m, in all kind of soils and rocks :
- for every 50m or part thereof - lead over 150m
and upto 500m
011060 Earth work in excavation as per approved 1 Each 10% per track
drawings etc., - Extra for Crossing of railway track Track
(each track). etc., -
011070 Earth work in excavation as per approved 1 cum 9.70
drawings etc., - Extra for every additional lift of
1.5m or part t etc., -
EARTH WORK IN BUILDINGS 1
012010 Earth work in excavation as per approved 1 cum 10.10
drawings etc., - Extra over item 011010 for
excavation in foundat etc., -
012050 Supplying and filling sand in plinth and under 1 cum 615.03
floors including watering, ramming,
consolidating and dressing complete
012060 Preparing and laying puddle on roof etc. 1
including supply of materials and all lead and lift
012091 Extra for planking and strutting, etc., - In open 1 Sqm 564.76
timbering
012092 Extra for planking and strutting, etc., - In close 1 Sqm 1123.47
timbering
MISCELLANEOUS : 1
014010 Dressing Surface (average excavation or filling 10 Sqm 67.50
upto 15 cm) including removing vegetation in all
kind of soil. Payment against this item is to be
made only if it is not included in earth work item
014020 Daghbel or lock spit 15 cm deep & minimum width 100 metre 111.20
at top 20 cm. Payment against this item is to be
made only if it is not included in earth work item.
014051 Turfing with sods, 10cm thick and 20 cm square 100 Sqm 4843.75
closely laid
014052 Turfing with planted doob grass 100 Sqm 3365.35
014053 Planting Sarkanda / sarpat or any other suitable 100 Sqm 2850.55
species approved by the engineer
014061 Providing and laying Jute Geo-Textile (JGT) etc., - 100 Sqm 3722.71
With GJ - Type 1
014062 Providing and laying Jute Geo-Textile (JGT) etc., - 100 Sqm 4344.69
With GJ - Type 2
014063 Providing and laying Jute Geo-Textile (JGT) etc., - 100 Sqm 5558.17
With GJ - Type 3
014110 Providing and removing barricading with the help 1 metre 86.00
of portable fencing along the running track
where the work is to be done in close vicinity of
the track. Fencing shall consist of self supporting
steel angles of size 50 x50x6mm, 1.5m long
provided with hooks etc. and embedded in CC
1:2:4 block of size 0.23x0.23x0.23M placed at c/c
distance of 2.0 M along the track. 12 mm dia rods
in three horizontal layers tack welded with the
angle posts including providing Retro-reflective
tapes in Horizontal & vertical direction. Note :
Released material will be the property of the
contractor after the completion of work. Cost
of cement to be paid separately.
015010 1
015020 1
015030 1
015040 1
015050 1
015060 1
015070 1
1
CHAPTER-2: CARRIAGE OF 1
MATERIALS
021010 Loading/Unloading F.P.S. / Modular bricks 1000 Nos. 441.90
including manual lead upto 50m and stacking
properly into/from trucks, trailors or wagons
021020 Leading bricks FPS / Modular upto 50m including 1000 Nos. 662.81
picking up
021021 Leading bricks FPS / Modular etc., - Additional 1000 Nos. 109.37
lead for every subsequent 50m or part
thereof over 50m and upto 500m over item
021020.
021030 Leading bricks FPS / Modular by truck, trailor, etc. 1000 Nos. 119.08
for lead upto 10 km. Lead under this item is
payable when the same exceeds 500 M.
021050 Leading stone setts of different size upto 50m 1 Cum 583.89
including picking up and stacking
021060 Leading stone setts by trucks, trailer, etc. for lead 1 Cum 59.54
upto
10 km. Note : Lead under this item is payable
when the same exceeds 500 M.
021070 Loading/Unloading ballast, kankar, brickbats, 1 Cum 46.62
stone- chips, shingle, stone boulders, block
kankar, pitching stones , rubble stones, laterite,
coal, surkhi, dry mortar, sand , moorum, earth,
manure or sludge, ashes, lime etc., including
lead up to 50m and stacking into/from trucks,
trailors or wagons
021080 Leading ballast, kankar, surkhi, lime, sand, ashes, 1 Cum 110.87
stone- chips, pitching, stone, boulders, soling,
stone, rubble stone, brickbats, shingle, dry
mortar, laterite or similar materials including
picking up and stacking, lead upto
50m
021081 Leading ballast, kankar, surkhi, lime, sand, ashes, 1 Cum 27.64
stone- chips, etc., - Additional lead for every
subsequent 50m or part thereof, over 50m and
upto 500m over item no. 021080
021240 Leading ballies over 7 M & upto 10m long, 100 Nos. 660.52
including loading, unloading and stacking, lead
upto 50m.
021241 Leading ballies over 7 M & upto 10m long, etc., - 100 Nos. 114.04
Additional lead for every subsequent 50m or
part thereof, over 50m and upto 500m over item
no. 021240.
021250 Leading ballies over 7m & upto 10m long, by 100 Nos. 523.86
truck, trailor, including loading, unloading and
stacking, for lead upto 10 km. Note : Lead under
this item is payable when the same exceeds 500
M.
021352 Stacking / Restacking wooden sleepers etc., -MG 100 Nos. 358.36
Sleepers
021353 Stacking / Restacking wooden sleepers etc., -NG 100 Nos. 291.62
Sleepers
021360 Stacking ballast, kankar, brickbats, stone chips, 1 Cum 13.53
shingle, stone boulders, block kankar, pitching
stones, rubble stones, surkhi, laterite, dry
mortar, sand, moorum, ashes, lime etc. if not
covered in the original item.
021370 Extra over initial lead of 50 M for crossing each 1 Each 10%
running track for the items covered in this
chapter.
021380 Leading of flower pots of sizes each weighing upto 100 Nos. 126.04
10kg. i.e. flower pots with plants including
picking up and stacking, lead upto 50m.
021381 Leading of flower pots weighing upto 10kg etc., - 100 Nos. 34.83
Additional lead for every subsequent 50m or
part thereof, over 50m and upto 500m over item
no. 021380.
021390 Leading of flower pots of sizes each weighing upto 100 Nos. 282.64
10kg, i.e. flower pots with plants including
loading, unloading and stacking, lead over 500 M
and upto 10 km.
021400 Leading of flower pots of sizes each weighing over 100 Nos. 239.01
10kg. i.e. flower pots with plants including
picking up and stacking, lead upto 50m.
021401 Leading of flower pots of sizes each weighing over 100 Nos. 39.76
10kg. Etc., - Additional lead for every
subsequent 50m or part thereof, over 50m and
upto 500m over item no. 021400.
021410 Leading of flower pots of sizes each weighing over 100 Nos. 104.52
10kg. i.e. flower pots with plants including
loading, unloading and stacking, lead over 500 M
and upto 10 km.
021450 Hiring of Truck of loading capacity 9.0 MT and 1 Each per 78757.83
running upto 2500 km per month (with 24 hours month
availability) for leading of Engineering Machines,
Materials & Men, as desired by Engineer-in-
charge. It includes cost of driver, helper, fuel,
e.g. diesel, mobil oil, brake oil etc. alongwith
related repairs works and all type of taxes as
admissible by State or Central Governments,
octroi, toll tax, barrier tax etc. Vehicle shall run
on pucca, kutcha road including along the track.
The contractor shall arrange road permit for
vehicle for all the States of operation, as per
instructions of engineer in-charge and vehicle shall
not be more than three years old.
021460 Extra over item no. 021450 for every additional 1 Km 31.46
km or part thereof over 2500 km in a month.
021470 Hiring of Truck of loading capacity 4.5 MT and 1 Each per 54616.05
running upto 2000 km per month (with 24 hours month
availability) for leading of Engineering Machines,
Materials & Men, as desired by Engineer-in-
charge. It includes cost of driver, helper, fuel,
e.g. diesel, mobil oil, brake oil etc. alongwith
related repairs works and all type of taxes as
admissible by State or Central Governments,
octroi, toll tax, barrier tax etc. Vehicle shall run
on pucca, kutcha road including along the track.
The contractor shall arrange road permit for
vehicle for all the States of operation, as per
instructions of engineer in-charge and vehicle shall
not be more than three years old.
021480 Extra over item no. 021470 for every additional 1 Km 27.60
km or part thereof over 2000 km in a month.
021500 Extra over item no. 021490 for every additional 1 Km 19.50
km or part thereof over 1500 km in a month.
021510 Hiring of JCB Machine (in good working condition) 1 Hour 631.57
for leveling and dressing ground / dismantling
structures including disposal of debris through
dumpers etc. with contractor’s labour, JCB
machine, machine operator, fuel, etc. The
contractor shall arrange road permit for vehicle for
all the States of operation, as per instructions of
engineer in-charge and vehicle shall not be more
than three years old. Payment shall be made
for actual working hours at site.
021530 Extra over item no. 021520 for every additional 1 Km 18.33
km or part there of over 80 km in a day.
021540 Hiring of Bulldozer with 12 feet wide blade 1 Hour 747.72
including necessary fuel, oil and operator etc.
complete as directed by engineer in-charge.
The contractor shall be responsible for
arranging all types of permits required for
movement of the bulldozer. Payment shall be
made for actual working hours at site.
022010 1
022020 1
022030 1
022040 1
022050 1
022060 1
022070 1
022080 1
022090 1
022100 1
CHAPTER - 3 : PLAIN CONCRETE
032040 Extra over items 032010 and 032020 for 1 cum 163.95
providing and fixing precast concrete above floor
two level for every floor or part thereof.
032060 Extra for providing and mixing water proofing 1 per 50 kg of 104.54
material of brand approved by railway, if not cement
included in relevant item.
MISCELLANEOUS : 1
033010 Extra for every subsequent 3m height ( or part 1 cum 163.95
there of ) above floor two level from plinth level
for concrete work in superstructure
033020 Extra for laying concrete in or under water and/ or 1 cum/m depth 239.30
liquid mud including cost of pumping or bailing out
water and removing slush etc. complete. Note
: The quantity will be calculated by
multiplying the depth measured from the sub-soil
water level upto centre of gravity of concrete
under sub-soil water level with quantity of
concrete in Cum executed under sub-soil water.
The depth of centre of gravity shall be reckoned
correct to 0.1m, 0.05m or more shall be taken as
0.1m and less than 0.05m ignored.
033030 Extra for laying concrete in or under foul positions 1 cum 98.24
033040 Supplying and using fly ash in concrete as per 1 cum 49.48
approved mix design where permitted by
engineer
033090 Supplying and applying gun grade, poly urethane 1 metre 128.29
grade crack sealer for filling cracks in concrete,
metals, plastic, wood etc. (Complete job includes
cleaning surface, applying surface activation
agent and applying sealer agent, finishing and
smoothening with proper tools.)
034010
034020
034030
034040
034050
034060
CHAPTER - 4 : REINFORCED
CEMENT CONCRETE
CAST IN SITU
FORM WORK :
042012 Centering and shuttering etc., for - Walls (any 1 Sqm 227.70
thickness) including attached plasters, buttresses,
plinth and string courses etc.
042019 Centering and shuttering etc., for - Extra for 1 Sqm 340.98
arches, domes, vaults exceeding 6m span
042040 Supplying and applying shuttering oil for mould 1 Sqm 7.86
releasing, having (Flash point 54 degree C and
specific gravity 0.88±0.02) for concrete formwork
to be applied either by brush or with spray
machine to the entire satisfaction of Engineer
Incharge
043011 Providing, hoisting and fixing in position upto floor 1 cum 2832.47
two level M20 Grade precast RCC work etc., - In
string courses, bands, coping, bed plates,
anchor blocks, plain window sills, and the like
043012 Providing, hoisting and fixing in position upto floor 1 cum 3788.40
two level M20 Grade precast RCC work etc., - In
small lintels upto 1.50m clear span
043013 Providing, hoisting and fixing in position upto floor 1 cum 4607.15
two level M20 Grade precast RCC work etc., - In
lintels, beams, bressumers
043014 Providing, hoisting and fixing in position upto floor 1 cum 3770.47
two level M20 Grade precast RCC work etc., - In
Shelves, cantilevers, chajjas, sunshades etc.
043015 Providing, hoisting and fixing in position upto floor 1 cum 2982.20
two level M20 Grade precast RCC work etc., - In
slabs for drain covers, manhole covers, flue tops
etc.
043016 Providing, hoisting and fixing in position upto floor 1 cum 6386.51
two level M20 Grade precast RCC work etc., - In
vertical and horizontal fins individually or
forming box louvers
043017 Providing, hoisting and fixing in position upto floor 1 cum 4674.23
two level M20 Grade precast RCC work etc., - In
mouldings as in cornices, window sills etc.
043018 Providing, hoisting and fixing in position upto floor 1 cum 2817.12
two level M20 Grade precast RCC work etc., - In
door and window frames
043019 Providing, hoisting and fixing in position upto floor 1 cum 5224.32
two level M20 Grade precast RCC work etc., - In
blocks of complicated design such as C blocks of
cabins, Platform walls etc.
043020 Providing, hoisting and fixing in position M25 1 cum 2828.93
Grade Reinforced cement concrete in Precast
standard Platform wall sections, including the cost
of centering, shuttering, finishing, Admixtures in
recommended proportion (as per IS 9103) to
accelerate, retard setting of concrete, improve
workability without impairing strength and
durability but excluding the cost of cement and
steel reinforcement, as per approved plan & as per
direction of the Engineer incharge.
044020 Extra for providing and fixing expanded metal 1 Sqm 349.06
mesh of size 20x60mm and strands 3.25 mm wide
1.6mm thick weighing 3.64kg. per sqm
for encasing of rolling steel sections/built up
sections in beams, columns and grillages
excluding cost of hangers.
REINFORCEMENT : 1
045010 Supplying Reinforcement for R.C.C. work including 1
straightening, cutting, bending, placing in position
and binding all complete.
ADDITIONS / DEDUCTIONS 1
046010 Extra for RCC work in superstructure above floor 1 cum 348.07
two level for every floor or part thereof.
046020 Extra for rendering smooth the top of suspended 1 Sqm 30.13
floors, landings and staircases (treads and risers)
with cement mortar 1:2 (1 cement: 2 coarse
sand) including a floating coat of neat cement
and protecting the surface with a layer of 7.5cm
of earth laid over
046030 Add or deduct for plaster drip course/ groove in 1 metre 16.95
plastered surface or moulding to R.C.C.
projections.
EXPANSION JOINTS 1
047010 Providing and fixing in position copper plate as per 1 Kg 419.65
design for expansion joints.
047020 Providing and filling in position, blown bitumen in 1 per cm 565.19
expansion joints. depth/cm
width/ 100m
length
047030 Providing and filling in position bitumen mix filler 1 per cm 169.91
of proportion 80kg of hot bitumen, 1kg of cement depth/cm
and 0.25cum of coarse sand for expansion joints. width/ 100m
length
047051 Providing and fixing sheet covering over expansion 1 metre 62.70
etc., - Non-Asbestos sheet 6mm thick, 150mm
wide
047052 Providing and fixing sheet covering over expansion 1 metre 84.29
etc., - Non-Asbestos sheet 6mm thick, 200mm
wide
047053 Providing and fixing sheet covering over expansion 1 metre 307.72
etc., - Aluminium fluted strips 3.15mm thick,
150mm wide
047054 Providing and fixing sheet covering over expansion 1 metre 393.94
etc., - Aluminium fluted strips 3.15mm thick,
200mm wide
048010 Extra for laying reinforced cement concrete in or 1 cum/m depth 23.93
under water and / or liquid mud including cost of
pumping out water and removing slush etc.
complete. Note : The quantity will be calculated by
multiplying the depth measured from the subsoil
water level upto the centre of gravity of the R.C.C.
in cubic metre executed under subsoil water. The
depth of centre of gravity shall be reckoned
correct to 0.1m, 0.05m or more shall be taken as
0.1m and less than 0.05m ignored. No extra
payment shall be made for placing the
reinforcement or centrring or shuttering under the
sub soil water level.
048020 Extra for laying reinforced cement concrete in or 1 cum/m depth 98.24
under foul position
048040 Supplying, fitting and fixing nipples with approved 1 Each 92.96
fixing compound after making grooves 10mm wide
and 10mm deep, drilling holes for grouting along
cracks in CC/ RCC structures, sealing of grooves
including subsequent cutting/ removal and sealing
of the holes of nipples after grouting by the
approved fixing compound, complete as per
specification.
048050 Supplying and applying epoxy mortars (average 1 Sqm 859.00
thickness 5mm) over leached, honey
combed, spalled concrete surface and
exposed steel reinforcement after thorough
cleaning of the exposed concrete/ reinforcement
with wire brush, etc. complete as per specification.
Note: This item is to be paid for only where
concreting of the defective work was not the
responsibility of the same contractor.
048061 Providing and fixing shear anchors made of HTS 1 Each 68.37
ba etc., - With 12mm dia bars
048062 Providing and fixing shear anchors made of HTS 1 Each 122.82
ba etc., - With 16mm dia bars
048070 Vacuum dewatering of all types & grade concrete 1 Sqm 8.17
by mechanical means including draining out the
sucked excess water from concrete & then
finishing the surface smooth with mechanical
trowelling with suitable equipment etc.
complete. The methodology to be adopted will
be as per user manual of dewatering & trawling
machine and as directed by Engineer.
048090 Extra for making anti-slip grooves in RCC staircase 1 Sqm 171.08
3mm wide and 3mm deep
048100 Keeping holes for holding down bolts in foundation 1 Each 43.55
blocks or bed blocks
049010 1
1
CHAPTER - 5 : BRICK WORK
051011 Brick work with non-modular (FPS) bricks of class 1 cum 2388.86
etc., - Cement lime mortar 1:1:6 (1 cement : 1
lime putty
: 6 fine sand)
051012 Brick work with non-modular (FPS) bricks of class 1 cum 2426.40
etc., - Cement lime mortar 1:2:9 (1 cement : 2
lime putty
: 9 fine sand)
051013 Brick work with non-modular (FPS) bricks of class 1 cum 2312.42
etc., - Cement mortar 1:3 (1 cement : 3 fine
sand)
051014 Brick work with non-modular (FPS) bricks of class 1 cum 2311.21
etc., - Cement mortar 1:4 (1 cement : 4 fine
sand)
051015 Brick work with non-modular (FPS) bricks of class 1 cum 2243.38
etc., - Cement mortar 1:6 (1 cement : 6 fine
sand)
051016 Brick work with non-modular (FPS) bricks of class 1 cum 2131.24
etc., - Cement mortar 1:3 (1 cement : 3 coarse
sand)
051017 Brick work with non-modular (FPS) bricks of class 1 cum 2277.09
etc., - Cement mortar 1:4 (1 cement : 4 coarse
sand)
051018 Brick work with non-modular (FPS) bricks of class 1 cum 2277.09
etc., - Cement mortar 1:6 (1 cement : 6 coarse
sand)
051019 Brick work with non-modular (FPS) bricks of class 1 cum 1954.21
etc., - In mud mortar. (with contractor's Mud)
051021 Brick work with modular bricks of class designatio 1 cum 1956.49
etc., - Cement mortar 1:3 (1 cement : 3 fine
sand)
051022 Brick work with modular bricks of class designatio 1 cum 1956.49
etc., - Cement Mortar 1:4 (1 cement : 4 fine sand)
051023 Brick work with modular bricks of class designatio 1 cum 1956.49
etc., - Cement Mortar 1:6 (1 cement : 6 fine sand)
051024 Brick work with modular bricks of class designatio 1 cum 1844.35
etc., - Cement mortar 1:3 (1 cement : 3 coarse
sand)
051025 Brick work with modular bricks of class designatio 1 cum 1992.20
etc., - Cement Mortar 1:4 (1 cement : 4 coarse
sand)
051026 Brick work with modular bricks of class designatio 1 cum 1992.20
etc., - Cement Mortar 1:6 (1cement : 6 coarse
sand)
051040 Extra over item 051010 & 051020 for brick work in 1 cum 166.76
superstructure beyond plinth level upto floor two
level :
051080 Extra for Making tapered surface of brick masonry 1 cum 155.80
051090 Extra for brick work with bricks of class 1 cum 294.76
designation
7.5 curved on plan upto a mean radius not
exceeding 6 metres
051120 Extra for forming cavity 5cm to 7.5cm wide in 1 Sqm 66.48
cavity walls with necessary weep and vent holes
including use of cores and cost of providing
and fixing bitumastic coated M .S. ties
300mm long of
25x3mm section at not less than 3 ties per sqm as
per approved design
051130 Providing half brick masonry with FPS bricks of 1 metre 95.42
class designation 7.5 in cement mortar 1:3
(1cement:
3coarse sand) in superstructure for closing cavity
5 to 7.5cm wide in cavity wall complete with 10cm
/
11.4cm wide bitumen felt type 3 grade1.
051181 Half brick masonry with bricks of class designatio 1 Sqm 272.84
etc., - Cement mortar 1:3 (1 cement : 3 coarse
sand)
051182 Half brick masonry with bricks of class designatio 1 Sqm 272.84
etc., - Cement mortar 1:4 (1 Cement : 4 coarse
sand)
051210 Extra for providing and placing in position 2 Nos. 1 Sqm 50.73
6mm dia. M.S.bars at every third course of half
brick masonry (with non-modular (FPS)
bricks) including cost of M.S. bars
051220 Extra for providing and placing in position 2 Nos. 1 Sqm 51.06
6mm dia. M.S.bars at every third course of half
brick masonry (with modular bricks) including
cost of M.S. bars.
052011 Tile brick masonry with tile bricks of etc., 1 cum 3485.89
- Lime mortar 1:1:1 (1 lime putty : 1 surkhi : 1
fine sand)
052012 Tile brick masonry with tile bricks of etc., 1 cum 3226.89
- Cement lime mortar 1:1:6 (1 cement : 1 lime
putty
: 6 fine sand)
052013 Tile brick masonry with tile bricks of etc., 1 cum 3294.49
- Cement lime mortar 1:1:6 (1 cement : 1 lime
putty
: 6 coarse sand)
052014 Tile brick masonry with tile bricks of etc., 1 cum 2995.99
- Cement mortar 1:3 (1 cement : 3 fine sand)
052015 Tile brick masonry with tile bricks of etc., 1 cum 2995.99
- Cement mortar 1:4 (1 cement : 4 fine sand)
052016 Tile brick masonry with tile bricks of etc., 1 cum 2995.99
- Cement mortar 1:6 (1 cement : 6 fine sand)
052017 Tile brick masonry with tile bricks of etc., 1 cum 3053.04
- Cement mortar 1:3 (1 cement : 3 coarse sand)
052018 Tile brick masonry with tile bricks of etc., 1 cum 3053.13
- Cement mortar 1:4 (1 cement : 4 coarse sand)
052019 Tile brick masonry with tile bricks of etc., 1 cum 3053.13
- Cement mortar 1:6 (1 cement : 6 coarse sand)
052021 Tile brick masonry with machine moulded tile brick 1 cum 3830.17
etc., - cement mortar 1:6 (1 Cement : 6 coarse
sand)
052022 Tile brick masonry with machine moulded tile brick 1 cum 3830.17
etc., - cement mortar 1:4 (1 Cement : 4 coarse
sand)
052030 Extra over item 052011 to 052019 for tile bricks 1 cum 436.74
masonry with tile bricks of class designation 10 in
superstructure beyond plinth level upto floor two
level.
052040 Extra over item 052011 to 052019 for tile brick 1 cum 247.01
masonry with tile bricks of class designation 10 in
superstructure above floor two level for every
floor or part thereof
052050 Deduct from items 052011 to 052019 if tile bricks 1 cum 777.04
of class designation 7.5 are specified or permitted
by engineer instead of class designation 10 :
052060 Extra over Item (Item 052011 and 052021) for tile 1 cum 292.48
brick masonry in square or rectangular pillars.
052070 Extra over items 052011 and 052021 for tile brick 1 cum 402.47
masonry curved on plan upto a mean radius not
exceeding 6 metres.
052100 Tile brick masonry work 5cm thick with tile bricks 1 Sqm 206.47
of class designation 10 in cement mortar 1:3
(1 cement : 3 coarse sand) in superstructure.
053020 Honey-comb brick work 20/23 cm thick with bricks 1 Sqm 367.68
of class designation 7.5 in cement mortar 1:4 (1
Cement : 4 coarse sand)
054020 Extra for laying brick work in or under water 1 cum/m depth 239.30
and/or liquid mud including cost of pumping or
bailing out water and removing slush etc.
complete
054030 Extra for laying brick work in or under foul position 1 cum 98.24
055021 Brick work with modular bricks of class designatio 1 cum 1654.21
etc., - 1:6 (1 Cement : 6 fine sand)
055022 Brick work with modular bricks of class designatio 1 cum 1729.36
etc., - 1:6 (1 Cement : 6 coarse sand)
055031 Brick work with machine moulded modular bricks 1 cum 2269.46
of etc., - 1:6 (1 Cement : 6 fine sand)
055032 Brick work with machine moulded modular bricks 1 cum 2300.89
of etc., - 1:6 (1 Cement : 6 coarse sand)
055071 Brickwork with clay fly ash FPS bricks of 1 cum 2151.77
etc., - Cement lime mortar 1:2:9 (1cement: 2
lime putty:
9fine sand).
055072 Brickwork with clay fly ash FPS bricks of 1 cum 2155.31
etc., - Cement lime mortar 1:1:6 (1cement: 1lime
putty:
6coarse sand).
055073 Brickwork with clay fly ash FPS bricks of 1 cum 1968.75
etc., - Cement mortar 1:4 (1 cement: 4 fine
sand).
055074 Brickwork with clay fly ash FPS bricks of 1 cum 1968.75
etc., - Cement mortar 1:6 (1 cement: 6 fine
sand).
055075 Brickwork with clay fly ash FPS bricks of 1 cum 2004.46
etc., - Cement mortar 1:4 (1 cement: 4 coarse
sand).
055076 Brickwork with clay fly ash FPS bricks of 1 cum 2004.46
etc., - Cement mortar 1:6 (1 cement: 6 coarse
sand).
055080 Extra for exposed brickwork / clay fly ash 1 cum 327.89
brickwork in superstructure above floor two level,
for every floor or part thereof.
055091 Brickwork with modular fly ash lime bricks (FALG 1 cum 2243.84
etc., - Cement mortar 1:4 (1 cement : 4 coarse
sand)
055092 Brickwork with modular fly ash lime bricks (FALG 1 cum 2212.41
etc., - Cement mortar 1:4 (1 cement : 4 fine
sand)
055093 Brickwork with modular fly ash lime bricks (FALG 1 cum 2243.84
etc., - Cement mortar 1:6 (1 cement : 6 coarse
sand)
055094 Brickwork with modular fly ash lime bricks (FALG 1 cum 2212.41
etc., - Cement mortar 1:6 (1 cement : 6 fine
sand)
055101 Brick work with modular calcium silicate bri 1 cum 3039.68
etc., - Cement mortar 1:4 (1 cement : 4 coarse
sand)
055102 Brick work with modular calcium silicate bri 1 cum 3008.25
etc., - Cement mortar 1:4 (1 cement : 4 fine
sand)
055103 Brick work with modular calcium silicate bri 1 cum 3039.68
etc., - Cement mortar 1:6 (1 cement : 6 coarse
sand)
055104 Brick work with modular calcium silicate bri 1 cum 3008.25
etc., - Cement mortar 1:6 (1 cement : 6 fine
sand)
055111 Brick work with modular extruded burnt fly ash cla 1 cum 2665.31
etc., - Cement mortar 1:4 (1 cement : 4 coarse
sand)
055112 Brick work with modular extruded burnt fly ash cla 1 cum 2762.98
etc., - Cement mortar 1:5 (1 cement : 5 fine
sand)
055120 Brick work with modular extruded burnt fly 1 cum 4790.88
ash sewer bricks (conforming to IS : 4885 –
1988) in arches in foundation and plinth in
cement mortar
1:3 (1cement: 3fine sand)
CC BLOCK MASONRY 1
056010 Cement Concrete Hollow Block Masonry 1
in foundation and plinth with:(factory made
blocks)
056030 Extra over Item 056010 for Cement Concrete 1 cum 327.89
Hollow Block masonry in superstructure above
floor two level for every floor or part thereof
056050 Extra over Item 056040 for Cement Concrete Solid 1 cum 515.55
Block masonry in superstructure above plinth
level upto floor two level
056060 Extra over Item 056040 for Cement Concrete Solid 1 cum 393.47
Block masonry in superstructure above floor two
level for every floor or part thereof
MISCELLANEOUS 1
057030 Making holes in old brick walls upto 15 cm square, 1 Each 75.41
fixing bolts clamps etc and making good the same
with CC 1:2:4 or CM 1:2 as per site conditions
057042 Cutting holes, 0.1 sqm size, for bathroom drains, 1 Each 19.27
etc., - In 20/23cm thick walls
057043 Cutting holes, 0.1 sqm size, for bathroom drains, 1 Each 25.36
etc., - In 30/34.5cm thick walls
057050 Stripping off/Chipping & cleaning bricks recovered 100 Nos. 275.39
from dismantled masonry including stacking
057061 Extra to rates for steining in wells with etc., 1 cum 852.16
- Upto 2 m inside dia.
057062 Extra to rates for steining in wells with etc., 1 cum 825.17
- Above 2 m and upto 6 m inside dia.
057071 Jack arching (brick work only) 115 cm thick (Class 1 Sqm 365.63
etc., - In cement mortar 1:3
057072 Jack arching (brick work only) 115 cm thick (Class 1 Sqm 367.06
etc., - In cement mortar 1:4
057090 Cutting bricks to different sizes for work like 100 Nos. 43.16
ornamental cornice etc. where each brick has to
be cut to produce the finished work when not
covered in original rates
057091 Cutting bricks to different sizes for work etc., 1 cum 164.46
- Extra rate for brickwork in coping
including chamfering
057092 Cutting bricks to different sizes for work etc., 1 Each 16.65
- Fixing wooden plugs (average size 40mm x40
mm x75 mm) in walls or floors and finishing the
surface, complete in Brickwork
057101 Add or deduct from rates of brickwork when the 1 cum 39.08
b etc., - Add for Class designation 12.5
057102 Add or deduct from rates of brickwork when the 1 cum 46.99
b etc., - Add for Class designation 10
057103 Add or deduct from rates of brickwork when the 1 cum -538.85
b etc., - Deduct for Class designation 5
057104 Add or deduct from rates of brickwork when the 1 cum -655.33
b etc., - Deduct for Class designation 3.5
057111 Add or deduct from rates of brickwork when the 1 cum -77.52
m etc., - Deduct for Class designation 10
057112 Add or deduct from rates of brickwork when the 1 cum -134.90
m etc., - Deduct for Class designation 7.5
057130 Brick edging (approx) 7cm wide 11.4cm deep to 1 metre 19.87
plinth protection / along road edges with bricks of
class designation 7.5 including grouting with
cement mortar 1:4 (1cement: 4fine sand)
057140 Edging with bricks laid dry length wise( App 7.5cm 1
deep) including excavation, refilling,
consolidating with hand packing and spreading
neatly surplus earth within a lead of 50metres
057141 Edging with bricks laid dry length wise( App 7.5cm 1 metre 18.45
etc., - 7.5 class designation, non-modular (FPS) /
modular bricks
057142 Edging with bricks laid dry length wise( App 7.5cm 1 metre 13.22
etc., - 5 class designation, non-modular (FPS) /
modular bricks
058010 1
058020 1
058030 1
RANDOM RUBBLE MASONRY : 1
061020 Extra for random rubble masonry with hard stone 1 cum 455.48
in superstructure above plinth level up to floor
two level, including levelling up with concrete as
per specifications, at window sills, ceiling level and
the like
061030 Extra for random rubble masonry with hard stone 1
in :
061031 Extra for random rubble masonry with hard stone 1 cum 204.77
in etc., - Square or rectangular pillars
061032 Extra for random rubble masonry with hard stone 1 cum 652.28
in etc., - Circular pillars
061033 Extra for random rubble masonry with hard stone 1 cum 259.20
in etc., - Extra for random rubble masonry with
hard stone, curved on plan for a mean radius not
exceeding
6m
062011 Coursed rubble masonry (1st sort) with hard 1 cum 2319.13
etc., - Cement mortar 1:3 (1cement: 3fine sand)
062012 Coursed rubble masonry (1st sort) with hard 1 cum 2319.13
etc., - Cement mortar 1:4 (1cement: 4fine sand)
062013 Coursed rubble masonry (1st sort) with hard 1 cum 2367.73
etc., - Cement mortar 1:6 (1cement: 6coarse
sand)
062014 Coursed rubble masonry (1st sort) with hard 1 cum 2319.13
etc., - Cement mortar 1:6 (1cement: 6fine sand)
062015 Coursed rubble masonry (1st sort) with hard 1 cum 2686.56
etc., - Lime mortar 1:1:1 (1lime putty: 1surkhi:
1fine sand)
062016 Coursed rubble masonry (1st sort) with hard 1 cum 2492.31
etc., - Cement Lime mortar1:1:6 (1Cement:
1Lime: 6 fine sand)
062021 Coursed rubble masonry (2nd sort) with hard 1 cum 2145.62
etc., - Cement mortar 1:3 (1cement: 3fine sand)
062022 Coursed rubble masonry (2nd sort) with hard 1 cum 2145.62
etc., - Cement mortar 1:4 (1cement: 4fine sand)
062023 Coursed rubble masonry (2nd sort) with hard 1 cum 2194.22
etc., - Cement mortar 1:6 (1cement: 6coarse
sand)
062024 Coursed rubble masonry (2nd sort) with hard 1 cum 2145.62
etc., - Cement mortar 1:6 (1cement: 6fine sand)
062025 Coursed rubble masonry (2nd sort) with hard 1 cum 2513.05
etc., - Lime mortar 1:1:1 (1lime putty: 1surkhi:
1fine sand)
062026 Coursed rubble masonry (2nd sort) with hard 1 cum 2318.80
etc., - Cement Lime mortar1:1:6 (1Cement:
1Lime: 6 sand ordinary)
062030 Extra for coursed rubble masonry with hard stone 1 cum 388.52
(first or second sort) in superstructure above
plinth level up to floor two level
062040 Extra for coursed rubble masonry with hard stone 1 cum 218.59
(first or second sort) in superstructure above floor
two level for every floor or part thereof
062051 Extra for coursed rubble masonry with hard stone 1 cum 227.39
( etc., - Square or rectangular pillars
062052 Extra for coursed rubble masonry with hard stone 1 cum 737.76
( etc., - Circular pillars
062060 Extra for coursed rubble masonry (first or second 1 cum 281.83
sort) with hard stone curved on plan for a mean
radius not exceeding 6m
LATERITE MASONRY 1
063010 Laterite Masonry in foundation and plinth with : 1
063050 Extra for Laterite masonry curved on plan for a 1 cum 191.33
mean radius not exceeding 6m
ASHLAR MASONRY : 1
064060 Extra for stone work, plain ashlar or ashlar 1 cum 437.19
punched above floor two level for every floor or
part thereof
064080 Extra for stone work; plain ashlar or ashlar 1 cum 724.78
punched curved on plan with a mean radius not
exceeding 6m
064090 Extra over Item 064030 for additional cost of 1 Sqm 340.98
centring for arches exceeding 6m span including
all strutting, bolting, wedging etc. and removal
(area of soffit to be measured)
065011 Stone work (red sand stone) for wall lining etc. 1 Sqm 2226.13
etc., - Red sand stone, 70mm thick
065012 Stone work (red sand stone) for wall lining etc. 1 Sqm 2048.08
etc., - Red sand stone, 60mm thick
065013 Stone work (red sand stone) for wall lining etc. 1 Sqm 1870.42
etc., - Red sand stone, 50mm thick
065014 Stone work (red sand stone) for wall lining etc. 1 Sqm 1691.84
etc., - Red sand stone, 40mm thick
065015 Stone work (red sand stone) for wall lining etc. 1 Sqm 1513.79
etc., - Red sand stone, 30mm thick
065020 Stone work (white sand stone) for wall lining etc. 1
(veneer work) over 12mm thick bed of cement
lime mortar 1:1:6 (1cement: 1lime putty: 6fine
sand) including pointing in white cement mortar
1:2 (1white cement: 2stone dust) with an
admixture of pigment matching the stone shade.
(To be secured to the backing by means of cramps
this shall be paid for separately)
065021 Stone work (white sand stone) for wall lining etc. 1 Sqm 2442.93
etc., - White sand stone, 70mm thick
065022 Stone work (white sand stone) for wall lining etc. 1 Sqm 2233.92
etc., - White sand stone, 60mm thick
065023 Stone work (white sand stone) for wall lining etc. 1 Sqm 2025.37
etc., - White sand stone, 50mm thick
065024 Stone work (white sand stone) for wall lining etc. 1 Sqm 1815.25
etc., - White sand stone, 40mm thick
065025 Stone work (white sand stone) for wall lining etc. 1 Sqm 1606.71
etc., - White sand stone, 30mm thick
065030 Extra for stone work (veneer work) curved on plan 1 cum 1041.87
with a mean radius not exceeding 6m
065042 Providing and fixing gun metal cramps of required 1 Each 54.79
etc., - 15x6mm – 16.5cm long
065060 Providing and fixing copper pins 7.5cm long 6mm 1 Each 14.60
dia. for securing adjacent stones in stone wall
lining in cement mortar 1:2 (1Cement: 2 fine
sand) including making the necessary chases
065071 Providing and fixing sloping chajja of stone 40mm 1 Sqm 807.93
etc., - Red sand stone
065072 Providing and fixing sloping chajja of stone 40mm 1 Sqm 836.97
etc., - White sand stone
065121 Providing and fixing red sand stone shelves fixe 1 Sqm 288.81
etc., - 30 mm thick
065122 Providing and fixing red sand stone shelves fixe 1 Sqm 338.00
etc., - 40 mm thick
065123 Providing and fixing red sand stone shelves fixe 1 Sqm 366.11
etc., - 50 mm thick
065124 Providing and fixing red sand stone shelves fixe 1 Sqm 1318.28
etc., - 75 mm thick
065125 Providing and fixing red sand stone shelves fixe 1 Sqm 1722.33
etc., - 100mm thick
065131 Providing and fixing red sand stone shelve 1 Sqm 717.50
etc., - 30 mm thick
065132 Providing and fixing red sand stone shelve 1 Sqm 769.96
etc., - 40 mm thick
065133 Providing and fixing red sand stone shelve 1 Sqm 794.80
etc., - 50 mm thick
065134 Providing and fixing red sand stone shelve 1 Sqm 1746.97
etc., - 75 mm thick
065135 Providing and fixing red sand stone shelve 1 Sqm 2151.03
etc., - 100mm thick
065160 Extra for laying stone work in or under water 1 cum per m 239.30
and/or liquid mud including cost of pumping or depth
bailing out water and removing slush etc.
complete
065170 Extra for laying stone work in or under foul 1 cum 98.24
position
065180 Wall lining butch work upto 10m height with 1 Sqm 905.61
Dholpur stone 40mm thick rough facing on the
exposed surface with stone strips of minimum
length 230mm and required width including
embedding every tenth layer and bottom most
layer in masonry or concrete after making
necessary chases of size 75x75mm and by
providing layer of 75mm thick strips including
12mm thick bed of cement mortar 1:3 (1cement:
3coarse sand) including ruled pointing in cement
mortar 1:2 (1white cement: 2stone dust) with an
admixture of pigment to match the shade of stone
complete as per direction of the Engineer-in-
Charge
065190 Stone work for wall lining upto 10m height etc. 1 Sqm 1119.11
(veneer work) over 12mm thick bed of cement
mortar 1:3 (1cement: 3coarse sand) and jointed
with grey cement slurry @ 3.30kg/ Sqm. including
rubbing and polishing complete. (To be secured to
the backing by means of cramps which shall be
paid for separately) Kota stone slabs rough
chiseled, 25mm thick
065200 Stone tile work for wall lining upto 10m height 1
with special adhesive like araldite or equivalent
over 12mm thick bed of cement mortar 1:3
(1cement: 3coarse sand) including pointing in
white cement with an admixture of pigment to
match the stone shade
065201 Stone tile work for wall lining upto 10m height w 1 Sqm 1098.89
etc., - 8mm thick (mirror polishing and
machine cut edge) Granite black stone
065202 Stone tile work for wall lining upto 10m height w 1 Sqm 1132.49
etc., - 8mm thick (mirror polishing and
machine cut edge) Granite brown Ruby Red stone
065203 Stone tile work for wall lining upto 10m height w 1 Sqm 997.70
etc., - 8mm thick (mirror polishing and
machine cut edge) Raj Nagar white stone
065210 Extra for stone work for wall lining on exterior 1 Sqm 55.76
walls of height more than 10m from ground level
for every additional height of 3m or part
065220 Dry rubble masonry in retaining walls, toe walls 1 cum 1533.86
etc.
066010 1
066020 1
066030 1
066040 1
066050 1
066060 1
066070 1
066080 1
066090 1
066100 1
CHAPTER - 7 : WOOD WORK 1
FRAMES 1
071010 Providing wood work in frames of doors, windows, 1
clerestory windows and other frames and trusses,
wrought, framed and fixed in position :
071031 Extra for additional labour for circular works, su 1 cudm 6.77
etc., - Second class teak wood
071032 Extra for additional labour for circular works, su 1 cudm 3.98
etc., - Sal wood
071033 Extra for additional labour for circular works, su 1 cudm 3.60
etc., - Hollock wood or locally available
comparable species of country wood (to be
listed by respective railway). - Kiln seasoned &
chemically treated
071034 Extra for additional labour for circular works, su 1 cudm 3.00
etc., - Kail, venteak, pillamarudhu or locally
available comparable species of good country
wood (to be listed by respective railway)
072040 Extra for providing heavy float glass panes 1 Sqm 32.35
13.75kg/ Sqm. (5.5mm thick) instead of ordinary
float glass panes 10kg sqm. (4mm thick), in
doors, windows and clerestory window shutters.
(Area of opening for glass panes excluding portion
inside rebate shall be measured)
072060 Deduct for providing pin headed glass panes 1 Sqm 197.46
instead of ordinary glass panes weighing 10kg/
Sqm. (4mm thick) in doors, windows and
clerestory windows, shutters (Area of opening for
glass panes excluding portion inside rebate shall
be measured)
072072 Providing and fixing 35mm thick framed, ledged 1 Sqm 1508.46
and etc., - Hollock wood or locally available
comparable species of country wood (to be
listed by respective railway). - kiln seasoned &
chemically treated
072081 Providing and fixing 35mm thick framed, ledged, 1 Sqm 992.21
br etc., - Kail, venteak, pillamarudhu or locally
available comparable species of good country
wood (to be listed by respective railway)
072082 Providing and fixing 35mm thick framed, ledged, 1 Sqm 1170.12
br etc., - Hollock wood or locally available
comparable species of country wood (to be
listed by respective railway). - kiln seasoned &
chemically treated
072091 Providing and fixing wire gauge shutter using 1 Sqm 2056.34
etc., - 2nd class teak wood.35mm thick
072092 Providing and fixing wire gauge shutter using 1 Sqm 1892.17
etc., - 2nd class teak wood 30mm thick
072093 Providing and fixing wire gauge shutter using 1 Sqm 1424.67
etc., - Hollock wood or locally available
comparable species of country wood (to be
listed by respective railway). - kiln seasoned &
chemically treated.-35mm thick
072094 Providing and fixing wire gauge shutter using 1 Sqm 1322.30
etc., - Locally available comparable species of
country wood (to be listed by respective railway).
- kiln seasoned & chemically treated.-30mm thick
072095 Providing and fixing wire gauge shutter using 1 Sqm 1205.05
etc., - Kail, venteak, pillamarudhu or locally
available comparable species of good country
wood (to be listed by respective railway). - 35mm
thick Kail wood
072100 Extra over Item 072090 for providing SS wire 1 Sqm 168.42
gauge instead of Galvanised MS wire gauge
072110 Deduct from Item no 072020 & 072090 if fixed 1 Sqm 45.90
shutters (without hinges) are provided instead of
openable shutters for doors, windows or
clerestory windows
072121 Extra for providing ISI marked stainless steel but 1 Sqm 137.21
etc., - For 35mm thick shutters
072122 Extra for providing ISI marked stainless steel but 1 Sqm 88.02
etc., - For 30mm thick shutters
072123 Extra for providing ISI marked stainless steel but 1 Sqm 58.68
etc., - For 25mm thick shutters
072131 Extra for providing ISI marked bright finished bra 1 Sqm 239.10
etc., - For 35mm thick shutters
072132 Extra for providing ISI marked bright finished bra 1 Sqm 87.46
etc., - For 30mm thick shutters
072141 Providing and fixing to IS: 2202 Part-1 marked flu 1 Sqm 1654.28
etc., - 35mm thick including ISI marked stainless
steel butt hinges with necessary screws
072142 Providing and fixing to IS: 2202 Part-1 marked flu 1 Sqm 1561.36
etc., - 30mm thick including ISI marked stainless
steel butt hinges with necessary screws
072143 Providing and fixing to IS: 2202 Part-1 marked flu 1 Sqm 1396.18
etc., - 25mm thick (for cupboard) including ISI
marked nickel plated bright finished M.S. piano
hinges IS:
3818 marked with necessary screws
072150 Providing and fixing flush door shutters to IS: 1
2202 Part-I non-decorative type, core of block
board construction with frame of 1st class hard
wood and well matched commercial 3ply
veneering with vertical grains or cross bands and
face veneers on both faces of shutters
072151 Providing and fixing flush door shutters to IS: 1 Sqm 1073.53
22 etc., - 35mm thick including ISI marked
stainless steel butt hinges with necessary screws
072152 Providing and fixing flush door shutters to IS: 1 Sqm 1038.69
22 etc., - 30mm thick including ISI marked
stainless steel butt hinges with necessary screws
072153 Providing and fixing flush door shutters to IS: 1 Sqm 937.38
22 etc., - 25mm thick (for cupboard) including ISI
marked nickel plated bright finished M.S. piano
hinges with necessary screws
072160 Extra for providing and fixing flush doors with teak 1 Sqm 351.93
veneering on one side in item No.072150
072170 Extra for providing lipping with 2nd class teak 1 Sqm 336.84
wood battens 25mm minimum depth on all edges
of shutters (over all area of door shutters to be
measured)
072181 Extra for providing vision panel not exceeding 0.1 1 Sqm 114.99
etc., - Rectangular or square
072182 Extra for providing vision panel not exceeding 0.1 1 Sqm 167.26
etc., - Circular
072191 Extra if louvers (not exceeding 0.2Sqm) are provid 1 Sqm 449.50
etc., - (a) In 2nd class teak wood
072192 Extra if louvers (not exceeding 0.2Sqm) are provid 1 Sqm 343.80
etc., - b) In commercial quality timber
072200 Extra for cutting rebate in flush door shutters 1 Sqm 75.50
(total area of the shutters to be measured)
072210 Providing and fixing magic eye piece 25mm size in 1 Each 197.46
all type of door shutters
073011 Providing and fixing 25mm thick panelled or panell 1 Sqm 1977.78
etc., - Second class teak wood
073021 Providing and fixing 25mm thick glazed shutters fo 1 Sqm 1749.96
etc., - Second class teak wood
073030 Providing and fixing 25mm thick cup board 1 Sqm 2576.73
shutters , with prelaminated flat pressed 3 layer
particle board conforming to IS 12823 -Grade I,
having one side decorative lamination of approved
shade and other side balancing lamination
including second class teak wood lipping
25x12mm thick with necessary screws and nickel
plated bright finished MS piano hinges complete
073041 Providing and fixing 25mm thick cup board 1 Sqm 2563.82
shutters etc., - With teak veneering on one side
and commercial veneering on other side
073042 Providing and fixing 25mm thick cup board 1 Sqm 1897.03
shutters etc., - With commercial veneering on
both sides
074031 Providing and fixing 2nd class teak wood plain lin 1 Sqm 2179.78
etc., - 25mm thick
074032 Providing and fixing 2nd class teak wood plain lin 1 Sqm 1730.59
etc., - 20mm thick
074033 Providing and fixing 2nd class teak wood plain lin 1 Sqm 1122.94
etc., - 12mm thick
074040 Providing and fixing flat pressed 3 layer particle 1
board medium density exterior grade (Grade-I)
(like Novapan, Ecoboard etc.) or graded wood
particle board (like Bhutan Board) IS: 3087
marked, to frame, backing or studding with
screws etc. complete (frame, backing or studding
to be paid separately)
74,041 Providing and fixing flat pressed 3 layer particle 1 Sqm 397.29
etc.,- 12mm thick
074042 Providing and fixing flat pressed 3 layer particle 1 Sqm 458.27
etc.,- 18mm thick
074050 Providing & fixing prelaminated particle board 1
with one side decorative & other side balancing
lamination Grade-I, Type-II IS: 12823 marked in
shelves with screws and M.S. or aluminium
brackets wherever required, edges to be painted
with polyurethene primer (Brackets to be paid
separately)
074061 Providing and fixing in wall lining flat pre etc., 1 Sqm 1168.51
- 12mm thick
074062 Providing and fixing in wall lining flat pre etc., 1 Sqm 1388.27
- 18mm thick
074063 Providing and fixing in wall lining flat pre etc., 1 Sqm 1490.48
- 25mm thick
074071 Providing and fixing specified wood frame work 1 cudm 62.55
con etc., - Hollock wood or locally available
comparable species of country wood (to be
listed by respective railway). - kiln seasoned &
chemically treated
074072 Providing and fixing specified wood frame work 1 cudm 79.61
con etc., - Kail, venteak, pillamarudhu or locally
available comparable species of good country
wood (to be listed by respective railway).
074081 Providing and fixing plywood plain lining with ne 1 Sqm 552.16
etc., - 4mm thick Decorative ply facings of
approved manufacturer
074082 Providing and fixing plywood plain lining with ne 1 Sqm 554.60
etc., - 3mm thick Decorative ply facings of
approved manufacturer
074083 Providing and fixing plywood plain lining with ne 1 Sqm 514.70
etc., - 3mm thick commercial ply lining of
approved manufacturer
074084 Providing and fixing plywood plain lining with ne 1 Sqm 674.29
etc., - 6mm thick commercial ply lining of
approved manufacturer
074090 Providing and fixing 4mm thick coir veneer board, 1 Sqm 709.03
ISI marked IS: 14842- 2000, plain lining with
necessary screws, priming coat on unexposed
surface etc. complete
074100 Providing and fixing plain non-asbestos cement 1 Sqm 361.10
sheet 6mm thick (high pressure steam cured as
per IS:14862-2000) in partitions including fixing
to frames with brass screws etc., complete with
50mm x 12mm deodar wood beading (frames to
be paid separately)
074111 Providing and fixing wooden planks in floors, she 1 Sqm 849.24
etc., - 25mm thick
074112 Providing and fixing wooden planks in floors, she 1 Sqm 966.86
etc.,- 30mm thick
074113 Providing and fixing wooden planks in floors, she 1 Sqm 1153.75
etc.,-35mm thick
074114 Providing and fixing wooden planks in floors, she 1 Sqm 1292.38
etc.,- 40mm thick
074115 Providing and fixing wooden planks in floors, she 1 Sqm 1632.45
etc., - 50mm thick
074120 Providing and fixing skirting of prelaminated with 1
(one side decorative and other side balancing
lamination) flat pressed, three layer (like
Novapan, Ecoboard etc.) or graded particle board
(like Bhutan Board) (medium density) Grade-I,
Type-II, IS: 12823 marked with necessary fixing
arrangements and screws including drilling
necessary holes for rawl plugs etc. and priming
coat on unexposed surface complete
074140 Providing and fixing plain jaffri of 35x10mm laths 1 Sqm 659.88
placed 35mm apart (frames to be paid separately)
including fixing 50x12mm beading complete with:
Kail, venteak, pillamarudhu or locally available
comparable species of good country wood (to be
listed by respective railway)
074150 Providing and fixing 18mm thick, 150mm wide 1 metre 279.32
pelmet of flat pressed 3 layer (like Novapan,
Ecoboard etc.) or graded wood particle board (like
Bhutan board) medium density grade-I, IS: 3087
marked including top cover of 6mm commercial
ply wood, nickel plated M.S. pipe 20mm dia
(heavy type) curtain rod with nickel plated
brackets including fixing with 25x3mm M.S. flat
10cm long and rawl plugs 50mm long
(designation 10No.) etc. all complete
074160 Extra for using veneered particle board in item of 1 metre 87.34
pelmet 18mm thick 150mm wide
074170 Providing and fixing 18mm thick, 150mm wide 1
pelmet of coir veneer board ISI marked IS: 14842
2000, including top cover of 6mm coir veneer
board, nickel plated M.S. pipe 20mm dia (heavy
type) curtain rod with nickel plated brackets
including fixing with 25x3mm M.S. flat 10cm long
and rawl plugs 50mm long (designation 10No.)
etc. all complete
074171 Providing and fixing 18mm thick, 150mm wide 1 metre 389.63
pelmet etc., - Commercial veneering on both sides
074172 Providing and fixing 18mm thick, 150mm wide 1 metre 504.85
pelmet etc., - Teak veneering on both sides
074181 Providing and fixing 12mm thick and 150mm wide 1 metre 252.93
woo etc., - With 2nd class teak wood
074182 Providing and fixing 12mm thick and 150mm wide 1 metre 154.03
woo etc., - With Kail, venteak, pillamarudhu or
locally available comparable species of good
country wood (to be listed by respective railway).
074190 Extra to Item for providing in pelmet brass 1
curtain rods of 1.25mm thick brass plate with
brackets instead of 25mm dia. wooden curtain
rods
074200 Providing and fixing teak wood lipping of size 1 metre 35.28
25x3mm
074211 Providing and fixing curtain rods of 1.25mm thick 1 metre 194.81
etc., - 12mm dia.
074212 Providing and fixing curtain rods of 1.25mm thick 1 metre 198.30
etc., - 20mm dia.
074213 Providing and fixing curtain rods of 1.25mm thick 1 metre 306.31
etc., - 25mm dia.
074220 Providing and fixing nickel plated M.S. pipe 1
curtain rods with nickel plated brackets
074221 Providing and fixing nickel plated M.S. pipe 1 metre 121.25
etc., - 20mm dia (heavy type)
074222 Providing and fixing nickel plated M.S. pipe 1 metre 279.22
etc., - 50mm dia (heavy type)
074230 Providing and fixing M.S. grills of required pattern 1
in frames of windows etc. with M.S. flats, square
or round bars etc. all complete
074251 Providing and fixing hard drawn steel wire fabric 1 Sqm 753.65
etc., - With 50x20mm 2nd class teak wood
beading
074252 Providing and fixing hard drawn steel wire fabric 1 Sqm 716.09
etc., - With 50x20mm 2nd class Deodar wood
beading
074261 Providing and fixing fly proof galvanized M.S. wir 1 Sqm 568.51
etc., - With 2nd class teak wood beading
50x20mm
074262 Providing and fixing fly proof galvanized M.S. wir 1 Sqm 364.87
etc., - With 12mm mild steel U beading
074263 Providing and fixing fly proof galvanized M.S. wir 1 Sqm 508.23
etc., - With Deodar wood beading 50x20mm
074270 Deduction for fixing 75x25mm hard drawn steel 1 Sqm 23.23
wire fabric of weight not less than 7.75kg sqm. in
panelled and glazed door and window shutters in
lieu of 4mm glass glazing
074280 Providing 40x5mm flat iron hold fast 40cm long 1 Each 70.65
including fixing to frame with 10mm diameter
bolts, nuts and wooden plugs and embeddings in
cement concrete block 30x10x15cm 1:3:6 mix
(1cement: 3coarse sand: 6graded stone
aggregate 20mm nominal size)
074301 Providing and fixing float glass panes with putty 1 Sqm 553.58
etc., - Float Glass panes 4mm thick (10kg /sqm)
074302 Providing and fixing float glass panes with putty 1 Sqm 476.92
etc., - Frosted glass panes 4mm thick (10kg /sqm)
074303 Providing and fixing float glass panes with putty 1 Sqm 612.35
etc., - Heavy sheet glass panes 5.5mm thick
(13.75
Kg/sqm)
074311 Providing and fixing float glass panes with 12mm 1 Sqm 568.71
etc., - Float Glass panes 4mm thick (10Kgs/Sqm)
074312 Providing and fixing float glass panes with 12mm 1 Sqm 492.05
etc., - Frosted glass panes 4mm thick
(10Kgs/sqm)
074313 Providing and fixing float glass panes with 12mm 1 Sqm 627.49
etc., - Heavy sheet glass panes 5.5mm thick
(13.75
Kg/sqm)
074321 Providing, erecting and fixing sal ballies in post 1 metre 117.33
etc., - 80mm dia ballies
074322 Providing, erecting and fixing sal ballies in post 1 metre 127.94
etc., - 100mm dia ballies
074323 Providing, erecting and fixing sal ballies in post 1 metre 170.48
etc., - 125mm dia ballies
074324 Providing, erecting and fixing sal ballies in post 1 metre 213.03
etc., - 150mm dia Sal ballies
074325 Providing, erecting and fixing sal ballies in post 1 metre 46.86
etc., - 80mm dia Eucalyptus ballies
074326 Providing, erecting and fixing sal ballies in post 1 metre 76.43
etc., - 100mm dia Eucalyptus ballies
074327 Providing, erecting and fixing sal ballies in post 1 metre 112.38
etc., - 125mm dia Eucalyptus ballies
074328 Providing, erecting and fixing sal ballies in post 1 metre 135.57
etc., - 150mm dia Eucalyptus ballies
074330 Providing, erecting and fixing Ballies of locally 1
available species approved by the zonal railway in
posts, purlins, rafters, etc., including cost of iron
nails and spikes required, and supplying and
applying wood preservative to exposed surfaces
074361 Providing and fixing Teak wood veneer sheet of 1 Sqm 280.87
app etc., - 3 mm thick
074362 Providing and fixing Teak wood veneer sheet of 1 Sqm 246.24
app etc., - 2.5mm thick
074363 Providing and fixing Teak wood veneer sheet of 1 Sqm 210.23
app etc., - 2mm thick
075011 Providing and fixing M.S. pressed butt hinges 1 Each 23.14
etc., - 125x65x2.12 mm
075012 Providing and fixing M.S. pressed butt hinges 1 Each 19.78
etc., - 100x58x1.90mm
075013 Providing and fixing M.S. pressed butt hinges 1 Each 17.23
etc., - 75x47x1.70mm
075014 Providing and fixing M.S. pressed butt hinges 1 Each 9.11
etc., - 50x37x1.50mm
075031 Providing and fixing M.S. single acting spring h 1 Each 120.49
etc., - 150mm
075032 Providing and fixing M.S. single acting spring h 1 Each 110.10
etc., - 125mm
075033 Providing and fixing M.S. single acting spring h 1 Each 93.24
etc., - 100mm
075041 Providing and fixing M.S. double acting spring hi 1 Each 145.97
etc., - 150mm
075042 Providing and fixing M.S. double acting spring hi 1 Each 130.90
etc., - 125mm
075043 Providing and fixing M.S. double acting spring hi 1 Each 91.09
etc., - 100mm
075051 Providing and fixing M.S. sliding door bolts gene 1 Each 137.06
etc., - 300x16 mm
075052 Providing and fixing M.S. sliding door bolts gene 1 Each 98.91
etc., - 250x16 mm
075060 Providing and fixing M.S. tower bolts generally 1
conforming to IS:204 (Part I) with necessary
screws etc. complete of size.
075061 Providing and fixing M.S. tower bolts generally 1 Each 40.06
etc., - 250x10 mm
075062 Providing and fixing M.S. tower bolts generally 1 Each 33.74
etc., - 200x10 mm
075063 Providing and fixing M.S. tower bolts generally 1 Each 26.99
etc., - 150x10 mm
075064 Providing and fixing M.S. tower bolts generally 1 Each 21.19
etc., - 100x10 mm
075070 Providing and fixing M.S. door handles with 1
necessary screws etc. complete.
075071 Providing and fixing M.S. door handles with 1 Each 16.54
etc., - 125mm
075072 Providing and fixing M.S. door handles with 1 Each 13.05
etc., - 100mm
075073 Providing and fixing M.S. door handles with 1 Each 9.52
etc., - 75mm
075080 Providing and fixing MS hooks and eyes 1
075081 Providing and fixing MS hooks and eyes 1 Each 13.94
etc., - 300mm
075082 Providing and fixing MS hooks and eyes 1 Each 11.15
etc., - 250mm
075083 Providing and fixing MS hooks and eyes 1 Each 10.10
etc., - 200mm
075084 Providing and fixing MS hooks and eyes 1 Each 8.71
etc., - 150mm
075085 Providing and fixing MS hooks and eyes 1 Each 8.13
etc., - 100mm
075090 Providing and fixing M.S. fan light pivot with 1 Each 21.94
necessary screws etc. complete.
075100 Providing and fixing M.S. fan light catch with 1 Each 18.09
necessary screws etc. complete.
075110 Providing and fixing M.S. hasp and staple (Safety 1
type) with necessary screws etc. complete.
075111 Providing and fixing M.S. hasp and staple (Safety 1 Each 15.17
etc., - 150mm
075112 Providing and fixing M.S. hasp and staple (Safety 1 Each 13.64
etc., - 115mm
075113 Providing and fixing M.S. hasp and staple (Safety 1 Each 11.04
etc., - 90mm
075120 Providing and fixing 300mm long M.S. chain with 1 Each 11.74
hook for fan light including necessary screws etc.
complete.
075131 Providing and fixing M.S. casement stays (straight 1 Each 32.99
etc., - 300mm weighing not less than 200 gm
075132 Providing and fixing M.S. casement stays (straight 1 Each 29.13
etc., - 250mm weighing not less than 150 gm
075133 Providing and fixing M.S. casement stays (straight 1 Each 26.81
etc., - 200mm weighing not less than 120 gm
075181 Providing Copper oxidized M.S. Piano hinges ISI 1 metre 98.78
ma etc., - Overall width 35mm
075182 Providing Copper oxidized M.S. Piano hinges ISI 1 metre 103.43
ma etc., - Overall width 50mm
075183 Providing Copper oxidized M.S. Piano hinges ISI 1 metre 112.72
ma etc., - Overall width 65mm
075190 Providing and fixing ISI marked Copper oxidized 1
M.S. sliding door bolts with nuts and screws etc.
complete of size
075191 Providing and fixing ISI marked Copper oxidized 1 Each 139.67
M. etc., - 300x16 mm
075192 Providing and fixing ISI marked Copper oxidized 1 Each 103.43
M. etc., - 250x16 mm
075200 Providing and fixing ISI -1378marked oxidised 1
M.S. tower bolts black finish (Barrel type) with
necessary screws etc. complete of size.
075273 Providing and fixing oxidised M.S. hasp and staple 1 Each 11.21
etc., - 90 mm
075280 Providing and fixing IS-1378 marked copper 1
oxidised M.S. casement stays (straight peg type)
with necessary screws etc. complete
075281 Providing and fixing IS-1378 marked copper 1 Each 21.43
oxidise etc., - 300mm weighing not less than
200gms
075282 Providing and fixing IS-1378 marked copper 1 Each 19.90
oxidise etc., - 250mm weighing not less than
150gms
075283 Providing and fixing IS-1378 marked copper 1 Each 18.74
oxidise etc., - 200mm weighing not less than
120gms
075290 Providing and fixing oxidised M.S. safety chain 1 Each 62.23
with necessary fixtures for doors (weighing not
less than 450gms.)
STAINLESS STEEL FITTINGS : 1
076010 Providing and fixing ISI: 12817 marked stainless 1
steel butt hinges with stainless steel screws etc.
complete of size
076011 Providing and fixing ISI: 12817 marked stainless s 1 Each 55.98
etc., - 125x64x1.90 mm
076012 Providing and fixing ISI: 12817 marked stainless s 1 Each 42.37
etc., - 100x58x1.90mm
076013 Providing and fixing ISI: 12817 marked stainless s 1 Each 28.14
etc., - 75x47x1.80mm
076014 Providing and fixing ISI: 12817 marked stainless s 1 Each 16.74
etc., - 50x37x1.50mm
076021 Providing and fixing ISI: 12817 marked stainless s 1 Each 72.24
etc., - 125x64x2.50mm
076022 Providing and fixing ISI: 12817 marked stainless s 1 Each 66.76
etc., - 100x60x2.50mm
076023 Providing and fixing ISI: 12817 marked stainless s 1 Each 41.84
etc., - 75 x50x2.50mm
BRASS FITTINGS - BRIGHT SATIN FINISH : 1
077011 Providing and fixing bright finished brass butt 1 Each 168.10
hinges etc., - 125x85x5.5mm (heavy type)
077012 Providing and fixing bright finished brass butt 1 Each 133.25
hinges etc., - 125x70x4mm (ordinary type)
077013 Providing and fixing bright finished brass butt 1 Each 120.60
hinges etc., - 100x85x5.5mm (heavy type)
077014 Providing and fixing bright finished brass butt 1 Each 103.18
hinges etc., - 100x70x4mm (ordinary type)
077015 Providing and fixing bright finished brass butt 1 Each 98.30
hinges etc., - 75x65x4mm (heavy type)
077016 Providing and fixing bright finished brass butt 1 Each 43.71
hinges etc., - 75x40x2.5mm (ordinary type)
077017 Providing and fixing bright finished brass butt 1 Each 25.62
hinges etc., - 50x40x2.5mm (ordinary type)
077021 Providing and fixing bright finished brass parliam 1 Each 417.66
etc., - 150x125x27x5mm
077022 Providing and fixing bright finished brass parliam 1 Each 382.82
etc., - 125x125x27x5mm
077023 Providing and fixing bright finished brass parliam 1 Each 347.97
etc., - 100x125x27x5mm
077024 Providing and fixing bright finished brass parliam 1 Each 250.17
etc., - 75x100x20x3.2mm
077031 Providing and fixing bright finished brass single 1 Each 347.26
etc., - 150mm
077032 Providing and fixing bright finished brass single 1 Each 312.41
etc., - 125mm
077033 Providing and fixing bright finished brass single 1 Each 178.84
etc., - 100mm
077042 Providing and fixing bright finished brass double 1 Each 405.37
etc., - 125mm
077043 Providing and fixing bright finished brass double 1 Each 272.96
etc., - 100mm
077051 Providing and fixing bright finished brass sliding 1 Each 242.47
etc., - 300x16mm
077052 Providing and fixing bright finished brass sliding 1 Each 213.44
etc., - 250x16mm
077060 Providing and fixing bright finished brass tower 1
bolts (barrel type) with necessary screws etc.
complete
077061 Providing and fixing bright finished brass tower b 1 Each 264.75
etc., - 250x10mm
077062 Providing and fixing bright finished brass tower b 1 Each 156.52
etc., - 200x10mm
077063 Providing and fixing bright finished brass tower b 1 Each 133.29
etc., - 150x10mm
077064 Providing and fixing bright finished brass tower b 1 Each 57.79
etc., - 100x10mm
077070 Providing and fixing bright finished brass handles 1
with screws etc. complete - of size
077071 Providing and fixing bright finished brass handles 1 Each 111.46
etc., - 125 mm
077072 Providing and fixing bright finished brass handles 1 Each 88.23
etc., - 100mm
077073 Providing and fixing bright finished brass handles 1 Each 70.81
etc., - 75 mm
077080 Providing and fixing bright finished brass door 1
latch with necessary screws etc. complete
077081 Providing and fixing bright finished brass door 1 Each 113.59
etc., - 300x16x5mm
077082 Providing and fixing bright finished brass door 1 Each 110.11
etc., - 250x16x5mm
077090 Providing and fixing bright finished brass 100mm 1 Each 503.96
mortice latch and lock with 6 levers and a pair of
lever handles with necessary screws etc. complete
(best make of approved quality)
077100 Providing and fixing bright finished brass 100mm 1 Each 517.90
mortice latch with one dead bolt and a pair of
lever handles with necessary screws etc. complete
(best make of approved quality)
077110 Providing and fixing bright finished brass night 1 Each 517.90
latch including necessary screws etc. complete
(best make of approved quality)
077120 Providing and fixing special quality bright finished 1
brass cupboard or ward robe locks with four levers
including necessary screws etc. complete (best
make of approved quality)
077121 Providing and fixing special quality bright finish 1 Each 98.01
cupboard or ward robe locks etc., - 40mm
077122 Providing and fixing special quality bright finish 1 Each 119.50
cupboard or ward robe locks etc., - 50mm
077123 Providing and fixing special quality bright finish 1 Each 128.79
cupboard or ward robe locks etc., - 65mm
077124 Providing and fixing special quality bright finish 1 Each 152.02
cupboard or ward robe locks etc., - 75mm
077130 Providing and fixing 50mm bright finished brass 1 Each 33.40
cup board or ward robe knob with necessary
screws (best make of approved quality)
077140 Providing and fixing bright finished brass hanging 1 Each 57.05
type floor door stopper with necessary screws etc.
complete
077150 Providing and fixing bright finished brass fan light 1 Each 33.23
pivot with necessary screws etc. complete
077160 Providing and fixing bright finished brass fan light 1 Each 34.07
catch with necessary screws etc. complete
077221 Providing and fixing nickel chromium plated brass 1 Each 170.03
butt hinges etc., - 125x85x5.5mm (heavy type)
077222 Providing and fixing nickel chromium plated brass 1 Each 139.83
butt hinges etc., - 125x70x4mm (ordinary type)
077223 Providing and fixing nickel chromium plated brass 1 Each 134.96
butt hinges etc., - 100x85x5.5mm (heavy type)
077224 Providing and fixing nickel chromium plated brass 1 Each 111.73
butt hinges etc., - 100x70x4mm (ordinary type)
077225 Providing and fixing nickel chromium plated brass 1 Each 102.67
butt hinges etc., - 75x65x4mm (heavy type)
077226 Providing and fixing nickel chromium plated brass 1 Each 49.24
butt hinges etc., - 75x40x2.5mm (ordinary type)
077227 Providing and fixing nickel chromium plated brass 1 Each 36.21
butt hinges etc., - 50x40x2.5mm (ordinary type)
077232 Providing and fixing Nickel chromium plated brass 1 Each 407.64
parliamentary hinges etc., - 125x125x27x5mm
077233 Providing and fixing Nickel chromium plated brass 1 Each 372.80
parliamentary hinges etc., - 100x125x27x5mm
077234 Providing and fixing Nickel chromium plated brass 1 Each 261.53
parliamentary hinges etc., - 75x100x20x3.2mm.
077242 Providing and fixing Nickel chromium plated brass 1 Each 337.50
single acting spring hinges etc., - 125mm
077243 Providing and fixing Nickel chromium plated brass 1 Each 300.33
single acting spring hinges etc., - 100mm
077253 Providing and fixing Nickel chromium plated brass 1 Each 317.74
double acting spring hinges etc., - 100mm
077261 Providing and fixing Nickel chromium plated brass 1 Each 244.08
double acting spring hinges etc., - 300x16mm
077262 Providing and fixing Nickel chromium plated brass 1 Each 215.04
double acting spring hinges etc., - 250x16mm
077272 Providing and fixing Nickel chromium plated brass 1 Each 153.03
etc., - 200x10mm
077273 Providing and fixing Nickel chromium plated brass 1 Each 121.30
etc., - 150x10mm
077274 Providing and fixing Nickel chromium plated brass 1 Each 97.49
etc., - 100x10mm
077281 Providing and fixing Nickel chromium plated brass 1 Each 116.95
etc., - 125mm
077282 Providing and fixing Nickel chromium plated brass 1 Each 99.53
etc., - 100mm
077283 Providing and fixing Nickel chromium plated brass 1 Each 82.11
etc., - 75mm
077291 Providing and fixing chromium plated brass door la 1 Each 172.36
etc., - 300x16x5mm
077292 Providing and fixing chromium plated brass door la 1 Each 160.74
etc., - 250x16x5mm
077300 Providing and fixing nickel chromium plated brass 1 Each 37.06
fan light pivot with necessary screws etc. complete
077310 Providing and fixing nickel chromium plated brass 1 Each 31.69
fan light catch with necessary screws etc.
complete
077320 Providing and fixing nickel chromium plated brass 1
hasp and staple (safety type) with necessary
screws etc. complete
077321 Providing and fixing nickel chromium plated brass 1 Each 83.18
etc., - 150mm
077322 Providing and fixing nickel chromium plated brass 1 Each 64.25
hasp and staple etc., - 115mm
077323 Providing and fixing nickel chromium plated brass 1 Each 54.51
hasp and staple etc., - 90mm
077350 Providing and fixing chromium plated brass night 1 Each 575.97
latch including necessary screws etc. complete
(best make of approved quality)
077370 Providing and fixing nickel chromium plated brass 1 Each 53.14
50mm cupboard or wardrobe knobs with nuts
complete
077380 Providing and fixing nickel chromium plated brass 1 Each 131.71
hanging type floor door stopper with necessary
screws etc. complete
077390 Providing and fixing nickel chromium plated brass 1 Each 102.42
casement window fastener with necessary screws
etc. complete
077400 Providing and fixing nickel chromium plated brass
casement stays (straight peg type) with necessary
screws etc. complete
077401 Providing and fixing nickel chromium plated brass 1 Each 100.09
casement staysetc., - 300mm weighing not less
than 330gms
077402 Providing and fixing nickel chromium plated brass 1 Each 84.99
casement staysetc., - 250mm weighing not less
than 280gms
077403 Providing and fixing nickel chromium plated brass 1 Each 72.22
casement staysetc., - 200mm weighing not less
than 240gms
077410 Providing and fixing copper oxidised brass butt 1
hinges with necessary screws etc. complete
077411 Providing and fixing copper oxidised brass butt hi 1 Each 173.52
etc., - 125x85x5.5mm (heavy type)
077412 Providing and fixing copper oxidised brass butt hi 1 Each 138.67
etc., - 125x70x4mm (ordinary type)
077413 Providing and fixing copper oxidised brass butt hi 1 Each 128.47
etc., - 100x85x5.5mm (heavy type)
077414 Providing and fixing copper oxidised brass butt hi 1 Each 108.71
etc., - 100x70x4mm (ordinary type)
077415 Providing and fixing copper oxidised brass butt hi 1 Each 106.15
etc., - 75x65x4mm (heavy type)
077416 Providing and fixing copper oxidised brass butt hi 1 Each 52.70
etc., - 75x40x2.5mm (ordinary type)
077417 Providing and fixing copper oxidised brass butt hi 1 Each 27.18
etc., - 50x40x2.5mm (ordinary type)
077420 Providing and fixing copper oxidised brass
parliamentary hinges with necessary screws etc.
complete
077421 Providing and fixing copper oxidised brass parliam 1 Each 429.13
etc., - 150x125x27x5mm
077422 Providing and fixing copper oxidised brass parliam 1 Each 405.79
etc., - 125x125x27x5mm
077423 Providing and fixing copper oxidised brass parliam 1 Each 370.94
etc., - 100x125x27x5mm
077424 Providing and fixing copper oxidised brass parliam 1 Each 256.28
etc., - 75x100x20x3.2mm
077430 Providing and fixing copper oxidised brass single 1
acting spring hinges with necessary screws etc.
complete :
077431 Providing and fixing copper oxidised brass single 1 Each 399.51
etc., - 150mm
077432 Providing and fixing copper oxidised brass single 1 Each 353.05
etc., - 125mm
077433 Providing and fixing copper oxidised brass single 1 Each 315.89
etc., - 100mm
077440 Providing and fixing copper oxidised brass double 1
acting spring hinges with necessary screws etc.
complete :
077441 Providing and fixing copper oxidised brass double 1 Each 567.93
etc., - 150mm
077442 Providing and fixing copper oxidised brass double 1 Each 405.32
etc., - 125mm
077443 Providing and fixing copper oxidised brass double 1 Each 321.69
etc., - 100mm
077450 Providing and fixing copper oxidised brass sliding 1
doors bolts and screws etc. complete :
077451 Providing and fixing copper oxidised brass sliding 1 Each 243.97
etc., - 300x16mm
077452 Providing and fixing copper oxidised brass sliding 1 Each 214.93
etc., - 250x16mm
077460 Providing and fixing copper oxidised bras tower 1
bolts (barrel type) with necessary screws etc
complete :
077461 Providing and fixing copper oxidised bras tower bo 1 Each 334.61
etc., - 250x10mm
077462 Providing and fixing copper oxidised bras tower bo 1 Each 303.13
etc., - 200x10mm
077463 Providing and fixing copper oxidised bras tower bo 1 Each 219.33
etc., - 150x10mm
077464 Providing and fixing copper oxidised bras tower bo 1 Each 149.64
etc., - 100x10mm
077470 Providing and fixing copper oxidised brass handles 1
with necessary screws etc. complete
077471 Providing and fixing copper oxidised brass handles 1 Each 122.91
etc., - 125mm
077472 Providing and fixing copper oxidised brass handles 1 Each 99.68
etc., - 100mm
077473 Providing and fixing copper oxidised brass handles 1 Each 82.18
etc., - 75mm
077480 Providing and fixing copper oxidised brass door
latch with necessary screws etc. complete
077481 Providing and fixing copper oxidised brass door 1 Each 171.31
latch etc., - 300x16x5mm
077482 Providing and fixing copper oxidised brass door 1 Each 159.70
latch etc., - 250x16x5mm
077490 Providing and fixing copper oxidised brass fan light 1 Each 43.68
pivot with necessary screws etc. complete
077500 Providing and fixing copper oxidised brass fan light 1 Each 36.89
catch with necessary screws etc. complete
077511 Providing and fixing copper oxidised brass hasp an 1 Each 102.72
etc., - 150mm
077512 Providing and fixing copper oxidised brass hasp an 1 Each 88.55
etc., - 115mm
077513 Providing and fixing copper oxidised brass hasp an 1 Each 72.27
etc., - 90mm
077520 Providing and fixing copper oxidised brass 100mm 1 Each 630.17
mortice latch and lock with 6 levers and a pair of
lever handles with necessary screws etc. complete
(best make of approved quality)
077530 Providing and fixing copper oxidised brass 100mm 1 Each 514.13
mortice latch with one dead bolt and a pair of
lever handles with necessary screws etc. complete
(best make of approved quality)
077540 Providing and fixing copper oxidised brass night 1 Each 631.44
latch including necessary screws etc. complete
(best make of approved quality)
077550 Providing and fixing special quality copper oxidised 1
brass cup board locks with six levers including
necessary screws etc. complete (best make of
approved quality) of :
077551 Providing and fixing special quality cop cup board 1 Each 219.11
locks etc., - Size 40mm
077552 Providing and fixing special quality cop cup board 1 Each 259.76
locks etc., - Size 50mm
077553 Providing and fixing special quality cop cup board 1 Each 271.38
locks etc., - Size 65mm
077554 Providing and fixing special quality cop cup board 1 Each 282.99
locks etc., - Size 75mm
077560 Providing and fixing copper oxidised brass 50mm 1 Each 69.08
cupboard or wardrobe knobs with nuts complete
077570 Providing and fixing copper oxidised brass hanging 1 Each 169.09
type floor door stopper with necessary screws etc.
complete
078011 Providing and fixing ISI marked aluminium butt 1 Each 92.38
hin etc., - 125x75x4mm
078012 Providing and fixing ISI marked aluminium butt 1 Each 84.25
hin etc., - 125x63x4mm
078013 Providing and fixing ISI marked aluminium butt 1 Each 72.88
hin etc., - 100x75x4mm
078014 Providing and fixing ISI marked aluminium butt 1 Each 66.49
hin etc., - 100x63x4mm
078015 Providing and fixing ISI marked aluminium butt 1 Each 61.84
hin etc., - 100x63x3.2mm
078016 Providing and fixing ISI marked aluminium butt 1 Each 52.68
hin etc., - 75x63x4mm
078017 Providing and fixing ISI marked aluminium butt 1 Each 39.90
hin etc., - 75x63x3.2mm
078018 Providing and fixing ISI marked aluminium butt 1 Each 32.93
hin etc., - 75x45x3.2mm
Note : Aluminium hinges shall not be used in 1
wooden shutters, stainless hinges shall be
preferred
078021 Providing and fixing aluminium sliding door bolts 1 Each 95.91
etc., - 300x16mm
078022 Providing and fixing aluminium sliding door bolts 1 Each 84.29
etc., - 250x16mm
078030 Providing and fixing aluminium tower bolts ISI 1
marked anodised (anodic coating not less than
grade AC 10 as per IS: 1868) transparent or dyed
to required colour or shade with necessary screws
etc. complete
078031 Providing and fixing aluminium tower bolts ISI 1 Each 73.81
mar etc., - 300x10mm
078032 Providing and fixing aluminium tower bolts ISI 1 Each 41.29
mar etc., - 250x10mm
078033 Providing and fixing aluminium tower bolts ISI 1 Each 39.26
mar etc., - 200x10mm
078034 Providing and fixing aluminium tower bolts ISI 1 Each 35.34
mar etc., - 150x10mm
078035 Providing and fixing aluminium tower bolts ISI 1 Each 27.21
mar etc., - 100x10mm
078040 Providing and fixing aluminium pull bolt lock 1 Each 82.52
anodised ISI marked (anodic coating not less than
grade AC 10 as per IS: 1868) transparent or dyed
to required colour and shade with necessary
screws etc. complete
078050 Providing and fixing 50cm long aluminium kicking 1 Each 140.34
plate 100x3.15mm anodised (anodic coating not
less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour or shade
with necessary screws etc. complete
078071 Providing and fixing aluminium hanging floor door 1 Each 36.38
etc., - Single rubber stopper
078072 Providing and fixing aluminium hanging floor door 1 Each 59.61
etc., - Twin rubber stopper
078080 Providing and fixing aluminium casement stays 1 Each 54.79
250mm long ISI marked anodised (anodic coating
not less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour and shade
with necessary screws etc. complete
078090 Providing and fixing bright finished brass 100mm 1 Each 617.68
mortic latch and lock ISI marked with six levers
and a pair of anodised (anodic coating not less
than grade AC 10 as per IS: 1868) aluminium
lever handles with necessary screws etc. complete
(best make of approved quality)
078110 Providing and fixing partition upto 2.40m height 1 Sqm 1254.72
having composite thickness of 67mm consisting of
frame and double skin 8.5mm thick Glass
Reinforced Gypsum (GRG) board manufactured by
spray suction technique with high strength plaster
of paris conforming to IS: 8272 and glass fibre of
E-glass or A-glass or N-glass in the form of
rovings, not less than 2.5% by weight of plaster of
paris and conforming to IS: 11320 including
providing and fixing of frame work made of special
section power pressed from MS sheet and
galvanised with zinc coating of Grade 175 and
consisting of floor and ceiling channel 50mm wide
having equal flanges of
32mm width 0.50mm thick fixed to floor/ ceiling
at spacing of 610mm centre to centre with dash
fastener of 12.5mm diameter 40mm length and
the studs 48mm wide having one flange of 34mm
and another flange 36mm and 0.50mm thick fixed
vertically within flanges of floor and ceiling
channel and placed at a spacing of 610mm centre
to centre by 6mm dia bolts and nuts at both ends
of partition fixed flush to wall with rawl plugs at
the spacing of 450mm centre to centre and fixing
of GRG boards to either side of frame work by
20mm long drive all screws on studs, floors and
ceiling channels at the spacing of 300mm centre
to centre, including jointing and finishing to a flush
finish with recommended joint filler, joint paper
078120 Providing and fixing partition upto 2.40m height 1 Sqm 1218.95
having composite thickness of 89mm consisting of
frame and double skin 8.5mm thick Glass
Reinforced Gypsum (GRG) board manufactured by
spray suction technique with high strength plaster
of paris conforming to IS: 8272 and glass fibre of
E-glass or A-glass or N-glass in the form of
rovings, not less than 2.5% by weight of plaster of
paris and conforming to IS: 11320 including
providing and fixing of frame work made of special
section power pressed from MS sheet and
galvanised with zinc coating of Grade 175 and
consisting of floor and ceiling channel 72mm wide
having equal flanges of 32mm width 0.50mm thick
fixed to floor/ ceiling at the spacing of
610mm centre to centre with dash fastener of
12.5mm diameter 40mm length and the studs
70mm wide having one flange of 34mm and
another flange 36mm and 0.50mm thick fixed
vertically within flanges of floor and ceiling
channel and placed at a spacing of 610mm centre
to centre by 6mm dia bolts and nuts at both ends
of partition fixed flush to wall with rawl plugs at
the spacing of 450mm centre to centre and fixing
of GRG boards to either side of frame work by
20mm long drive all screws on studs, floors and
ceiling channels at the spacing of
300mm centre to centre, including jointing and
finishing to a flush finish with recommended joint
filler, joint paper tap and joint finisher and two
coats of primer suitable for GRG board as per
manufacturers specifications all complete
078130 Providing and fixing factory made P.V.C. door 1 metre 387.59
frame of size 50x47mm with a wall thickness of
5mm, made out of extruded 5mm rigid PVC foam
sheet mitered at corners and joined with 2 Nos. of
150mm long brackets of 15x15mm M.S. square
tube, the vertical door profiles to be reinforced
with 19x19mm M.S. square tube of 19 gauge,
EPDM rubber gasket weather seal to be provided
through out the frame. The door frame to be fixed
to the wall using M.S. screws of 65/100mm size
complete as per manufacturers specification and
direction of Engineer-in-Charge
078160 Supplying, providing and fixing white colour sliding 1 Sqm 5022.96
uPVC Window complete, consisting of uPVC frame
of size 80mm x 52mm and uPVC shutter of size
54mm x 38mm with 1.2mm thick GI section
reinforcement wherever required, produced by
ISO 9001:2000 and ISO 14001:2004 certified
company. Window shutter will consist either of
5mm thick float glass or galvanised wire gauge
alongwith complete fittings, e.g. pulley/rollers,
transmission gear and handle for operating
window
078170 Supplying, providing and fixing white colour sliding 1 Sqm 5259.75
uPVC Door complete, consisting of uPVC frame of
size 95mm x 60mm and uPVC shutter of size
66mm x 42mm with 1.2mm thick GI section
reinforcement wherever required, produced by
ISO 9001:2000 and ISO 14001:2004 certified
company. Door shutter will consist either of 5mm
thick float glass or galvanised wire gauge or solid
PVC panel alongwith complete fittings, e.g.
pulley/rollers, transmission gear and handle for
operating door
078180 Providing and fixing to existing door frame 24mm 1 Sqm 1487.77
thick factory made PVC door shutters made of
styles and rails of a PVC hollow section of size
59mm x 24mm with a wall thickness
2mm±0.2mm. The styles and rails mitered cut
and joined at corners by means of M.S. galvanized
/plastic brackets of size 75mm x
220mm having wall thickness 1.0mm/solid and fix
with stainless steel screws. The styles of shutter
reinforced by inserting galvanized M.S. tube of
size 19mm x 19mm with a wall
thickness1mm±0.1mm. The lock rail made out of
‘H’ section, PVC hollow section of size 100mm x
24mm with a wall thickness 2mm±0.2mm, fixed
to shutter styles by means of plastic/galvanized
M.S. ’U’ cleats. The shutter frame filled with a PVC
multi-chambered panel of size 20 x 200mm with a
wall thickness 1mm±0.1mm. The panels filled
vertically and tie bar at two places by inserting
horizontally 0.6mm galvanized M.S. rod and
fastened with nuts and washers
078190 Providing and fixing to existing door frame 24mm 1 Sqm 1746.95
thick factory made PVC door shutters made of
styles and rails of a PVC hollow section of size
34mm x 24mm with a wall thickness
2mm±0.2mm. The styles and rails mitered cut
and joined at corners by means of M.S. galvanized
/plastic brackets of size 75mm x
220mm having wall thickness 1.0mm/solid and fix
with stainless steel screws. The styles of shutter
reinforced by inserting galvanized M.S. tube of
size 19 x 19mm with a wall
thickness1mm±0.1mm. The shutter frame filled
with a PVC multi-chambered single panel of size
20 x 762mm with a wall thickness 1mm±0.1mm.
The panels filled vertically and tie bar at two
places by inserting horizontally 0.6mm galvanized
M.S. rod and fastened with nuts and washers. All
complete as per manufacturer’s specification and
direction of Engineer-In-Charge
078200 Providing and fixing at all heights wall paneling of 1 Sqm 1781.02
12mm thick phenol bonded Bamboo Mat board
conforming to IS: 13958-1994 including providing
and fixing to frame work made of 50mm X 50mm
hardwood plugs including cutting brick work and
fixing in cement mortar and making good walls
etc. and also providing and fixing wooden moulded
corner beading of triangular shape to the junction
of paneling etc. with iron screws as a complete
job.
078210 Providing and fixing at all heights wall paneling of 1 Sqm 1620.73
9mm thick phenol bonded Bamboo Mat board
conforming to IS : 13958-1994 including providing
and fixing to framework made of 50mm X 50mm
hardwood plugs including cutting brick work and
fixing in cement mortar and making good the walls
etc. and also providing and fixing wooden moulded
corner beading of triangular shape to the junction
of paneling etc. with iron screws as a complete job
078250 Providing and fixing to existing door frame 35mm 1 Sqm 3336.06
thick factory made Poly Vinyl Chloride (PVC) door
shutter made of styles and rails of a uPVC hollow
section of size 35mmx110mm and wall thickness
2mm±0.2mm with inbuilt decorative moulding
edging on one side. Styles of shutter reinforced by
inserting PVC section of size 28mmx30mm of
1.5mmm ± 0.2mm wall thickness. Styles and rails
mitered and welded corners. Lock rail made of 'H'
section, a uPVC profile section of size
35mmx105mm and 2mm ± 0.2m wall thickness
welded to shutter styles, shutter frame filled with
a uPVC multi-chambered single panel of size not
less than 610mm, having overall thickness of
20mm and 1mm ± 0.1mm wall thickness with
20mm moulding panel beading of size
8.5mmx15mm complete as per direction of
Engineer in charge
078260 Providing and fixing to existing door frame 38mm 1 Sqm 2923.36
thick factory made Poly Vinyl Chloride (PVC) door
shutter made of styles and rails of a uPVC hollow
section of size 90mmx38mm and wall thickness
2mm±0.2mm. Styles and rails mitered and joined
at the corners by means of MS galvanized/plastic
bracket of size 75mmx220mm having wall
thickness 1.0mm and stainless steel screws.
Styles of shutter reinforced by inserting galvanized
MS tube of size 25mmx20mm and
1mm ± 0.1 mm wall thickness. Lock rail made of
'H' section, a uPVC hollow section of size
105mmx38mm and 2mm ± 0.2m wall thickness
fixed to the shutter styles by means of plastic
/galvanized MS 'U' cleats. Shutter frame filled
with a uPVC multi-chambered PVC panel of size
610mmx20mm with 1.2mm ± 0.1mm wall
thickness, complete as per direction of Engineer
incharge
078270 Providing and fixing factory made uPVC door 1 R metre 286.07
frame made of uPVC extruded section profile size
50mmx60mm (±1mm) with wall thickness
2mm±0.2mm, corners of door frame to be
mitered and joined at corners by means of plastic,
galvanized brackets and stainless steel screws.
Hinge side vertical of frames reinforced by
galvanized MS tube of size 19mmx38mm and
1mm ± 0.1mm wall thickness and 3 nos. stainless
steel hinges fixed to frame complete as per
direction of Engineer incharge
078281 Providing and fixing factory made UPVC door etc., 1 R metre 227.99
- Extruded section profile size 48mm x40 mm
078282 Providing and fixing factory made UPVC door etc., 1 R metre 179.14
- Extruded section profile size 42mm x50 mm
078290 Supplying, providing and fixing white colour 1 RM 745.92
Double lipped solid PVC window frame of size 42
mm x 115 mm consisting of frame made of M.S.
Tube of 19 gauge of size 15 mm x 15 mm and
solid PVC section made from 4 mm thick (3.75
mm PVC foam sheet laminated with 0.25 mm rigid
PVC sheet) suitably joined using PVC solvent
cement so as to fix in walls using hold fasts. M.S.
Window grill should be fixed suitably with sold PVC
sections mitered cut on corners complete as per
directions of Engineer Incharge
079010 1
079020 1
079030 1
079040 1
079050 1
CHAPTER - 8 : STEEL AND 1
ALUMINIUM WORK
STEEL WORK 1
081010 Structural steel work in single section including 1
cutting, bending, straightening, drilling, rivetting,
bolting, hoisting, fixing in position, including
applying a priming coat of approved steel primer,
complete - upto
6m height above GL
081050 Erecting roof trusses, tank stagings, steel tanks 1 quintal 250.36
etc. including rivetting for work upto 10m height
above GL
081070 Erecting rails in posts, platform wall copings etc. 1 quintal 80.36
including necessary cutting and drilling
081080 Riveting including reaming holes where necessary 100 rivets 129.13
for every 5mm dia or part thereof
081090 Cutting out rivets for every 5mm or part thereof 100 rivets 65.19
081100 Providing and fixing MS round or square bars/ flats 1 Sqm 49.46
or grills in frames in window and clerestory
windows
081120 Providing and fixing hard drawn steel wire fabric 1 Sqm 502.60
75X25 mm mesh of weight not less than 7.75 Kg
per sqm on angle iron or flat iron frame including
all incidental work complete. Cost of frames to be
paid separately under relevant item
081190 Providing and fixing 1mm thick M.S. sheet sliding- 1 Sqm 2742.82
shutters with frame and diagonal braces of
40x40x6mm angle iron, 3mm M.S. gusset plate at
the junction and corners 25mm dia pulley
40x40x6mm angle and T-iron guide at the top and
bottom respectively with bolts, nuts, locking
arrangement, clamping arrangement, stoppers,
handles and hold fasts including applying a
priming coat of approved steel primer
081201 Providing and fixing 1mm thick M.S. sheet etc., - 1 Sqm 2224.60
Using M.S. angles 40x40x6mm for diagonal braces
081202 Providing and fixing 1mm thick M.S. sheet etc., - 1 Sqm 2056.32
Using flats 30x6mm for diagonal braces and
central cross piece
081220 Providing and fixing ball bearing for rolling 1 Each 480.30
shutters
081231 Extra for providing mechanical device chain and cr 1 Sqm 538.38
etc., - Exceeding 10.00Sqm and upto 16.80 Sqm.
in the area
081232 Extra for providing mechanical device chain and cr 1 Sqm 557.75
etc., - Exceeding 16.80 Sqm in area
081251 Providing and fixing ISI standard steel glazed do 1 Sqm 2648.86
etc., - Doors
081252 Providing and fixing ISI standard steel glazed do 1 Sqm 2416.13
etc., - Windows fixed
081253 Providing and fixing ISI standard steel glazed do 1 Sqm 2702.34
etc., - Windows-side hung
081254 Providing and fixing ISI standard steel glazed do 1 Sqm 2760.41
etc., - Ventilators-top hung
081255 Providing and fixing ISI standard steel glazed do 1 Sqm 2760.41
etc., - Ventilators-centre hung
081260 Extra for providing and fixing steel beading of 1 metre 17.77
approved shape and section with screws instead of
glazing clips and metal sash putty in steel doors,
windows, ventilators and composite units
081281 Providing and fixing pressed steel door etc., - 1 metre 302.29
Profile-A (105x60mm) Single rebate
081282 Providing and fixing pressed steel door etc., - 1 metre 325.52
Profile-B (125x60mm) Single rebate
081283 Providing and fixing pressed steel door etc., - 1 metre 353.16
Profile-C (160x60mm) Double rebate
081300 Providing and fixing 20x6mm mild steel 15cm long 1 Each 23.06
clamps for securing chick tops
081310 Providing and fixing mild-steel rings of 6mm round 1 Each 15.51
bars and 40mm internal dia for fastening ropes of
chicks
081320 Providing and fixing M.S. fan clamp of 16mm dia 1 Each 86.57
M.S. bar bent to shape with hooked ends in R.C.C.
slabs during laying including painting the exposed
portion of loop, all as per standard design
complete
081330 Extra over rate of Item No. 081320 for providing 1 cm height 1.30
and fixing M.S. fan clamp as per design in R.C.C.
beams during laying towards the additional height
of the clamps due to beam rib
081340 Providing and fixing circular cast iron box for 1 Each 80.42
ceiling fan clamps 140mm internal dia. 73mm
height, 5mm thick rim, bottom and top lid of
1.5mm thick M.S. sheet with its top surface
hacked for proper bonding top lid shall be screwed
into the cast iron box by means of 3.3mm dia.
Round headed screws, one lock at the corners,
clamps shall be made of 12mm dia. M.S. bar bent
to shape as per standard drawing
081350 Providing and fixing circular/ hexagonal M.S. sheet 1 Each 103.65
ceiling fan box with clamps of internal dia 140mm,
73mm height, 3mm thick rim, top and bottom lid
of
1.5mm M.S. sheet. Lids shall be screws into M.S.
box by means of 3mm round beaded screws,
clamps shall be made of 12mm dia M.S. bar bent
to shape as per standard drawing with over all
length as 80cm. (it includes cost of clamps also)
081360 Providing and fixing M.S. round holding down bolts 1 Kg 74.65
with nuts and washer plates complete
081430 Supplying and fixing to pan type latrines 0.91 mm 1 Sqm 527.79
thick M.S. Steel Flat Cover (hinged on 12 mm dia
M.S. bar on top) with 6.0mm dia bar handle
welded or riveted on the flap. (including all labour
and material)
ALUMINIUM WORK 1
082010 Providing and fixing anodised aluminium work for
doors, windows, ventilators and partitions with
extruded built up standard tubular and other
sections of approved make conforming to IS:733
and IS:1285, anodised transparent or dyed to
required shade according to IS:1868 (Minimum
anodic coating of grade AC 15), fixed with rawl
plugs and screws or with fixing clips, or with
expansion hold fasteners including necessary
filling up of gaps at junctions, at top, bottom and
sides with required PVC/neoprene felt etc.
Aluminium sections shall be smooth, rust free,
straight, mitered and jointed mechanically
wherever required including cleat angle.
Aluminium snap beading for glazing/ panelling,
C.P. brass/stainless steel screws, all complete as
per architectural drawings and the directions of
Engineer-in-charge. (Glazing and panelling to be
paid for separately)
082021 Providing and fixing 12mm thick prelaminated thre 1 Sqm 972.64
etc., - Pre-laminated particle board with
decorative lamination on one side and balancing
lamination on other side
082022 Providing and fixing 12mm thick prelaminated thre 1 Sqm 1017.77
etc., - Prelaminated particle board with decorative
lamination on both sides
082041 Providing and fixing double action hydraulic etc., - 1 Each 1837.16
With Stainless Steel cover plate
082042 Providing and fixing double action hydraulic etc., - 1 Each 2421.65
With Brass cover plate
082050 Providing and fixing anodised aluminium work 1 Kg 479.91
(with minimum 15 micron uniform anodic coating)
consisting of tee/angle sections, of approved make
conforming to IS:733 in frames of false ceiling
including aluminium angle cleats with necessary
C.P. brass/stainless steel sunk screws, aluminium
perimeter angles fixed to wall with rawl plugs @
450 mm centre to centre and fixing the frame
work to level adjusting hangers (6mm dia. M.S.
rods) with necessary cadmium plated machine
screws all complete as per approved architectural
drawings and direction of the Engineer-in-charge
(level adjusting hangers, ceiling cleats and
expansion hold fasteners to be paid for separately)
083020 Providing and fixing Aluminium round/ square bars 1 Sqm 630.52
/ flats or grill in frame of windows and cleastory
windows
083032 Providing and fixing acrylic sheet for glazi etc., - 5 1 Sqm 783.33
mm thick
083040 Extra for using coloured acrylic sheet instead of 1 Sqm 66.20
transparent / transculant sheet
083060 Extra over item 083050 for using SS 316 Grade 1 Kg 92.92
stainless steel (to be used in corrosive coastal
areas) instead of SS 304 Grade
084010 1
084020 1
084030 1
084040 1
084050 1
084060 1
084070 1
084080 1
084090 1
084100 1
CHAPTER-9:FLOORING, PAVING AND 1
DADO
BRICK FLOORING 1
091010 Brick on edge flooring with bricks of class 1
designation
7.5 including cement slurry etc. complete in
cement mortar
091011 Brick on edge flooring with bricks of class design 1 Sqm 287.53
etc., - 1:4 (1cement: 4coarse sand).(With FPS
Bricks)
091012 Brick on edge flooring with bricks of class design 1 Sqm 287.53
etc., - 1:6 (1cement: 6coarse sand).(With FPS
Bricks)
091020 Flat Brick flooring with bricks of class designation 1
7.5 including cement slurry etc. complete in
cement mortar
091021 Flat Brick flooring with bricks of class design etc., 1 Sqm 202.39
- 1:4 (1cement: 4coarse sand).(With FPS Bricks)
091022 Flat Brick flooring with bricks of class design etc., 1 Sqm 202.39
- 1:6 (1cement: 6coarse sand).(With FPS Bricks)
091031 Providing hand packed dry flat brick flooring, cl 1 Sqm 260.58
etc., - Brick on edge
091032 Providing hand packed dry flat brick flooring, cl 1 Sqm 180.83
etc., - Flat brick
091040 Deduct where railway bricks old / new are 1
supplied
091041 Deduct where railway bricks old / new are 1 Sqm 116.27
supplied etc., - From flat brick flooring
091042 Deduct where railway bricks old / new are 1 Sqm 173.64
supplied etc., - From brick on edge flooring
091050 Extra for brick flooring (with F.P.S bricks) laid in 1 Sqm 13.43
diagonal / herring bone bond or other pattern as
specified
091060 Dry stone ballast 50 mm nominal size, rammed in 1 Sqm 121.77
floors 75 mm thick layer
091070 Moorum flooring 10 cm thick (consolidated depth) 1 Sqm 90.26
including watering and ramming. With Contractor's
Moorum
091080 Laying cement concrete 1:2:4 (1cement: 2coarse 1 cum 2539.88
sand: 4graded stone aggregate 12.5mm nominal
size) of thickness 25 to 40 mm as under layer of
flooring
092021 Cement plaster skirting (upto 30cm height) w etc., 1 Sqm 122.74
- 15mm thick
092022 Cement plaster skirting (upto 30cm height) w etc., 1 Sqm 125.72
- 18mm thick
092061 Providing and laying plain cement concrete floorin 1 cum 2824.89
etc., - M-20
092062 Providing and laying plain cement concrete floorin 1 cum 2824.89
etc., - M-25
092063 Providing and laying plain cement concrete floorin 1 cum 2824.89
etc., - M-30
TERRAZO FLOORING : 1
093010 Providing top layer of floor, 6mm thick with white, 1
black, chocolate, grey, yellow or green marble
chips of sizes from 1mm to 4mm nominal size laid
in cement marble powder mix 3:1 (3cement:
1marble powder) by weight in proportion of 4:7
(4cement marble powder mix: 7marble chips) by
volume including cement slurry etc. complete
093011 Providing top layer of floor, 6mm thick with whit 1 Sqm 148.41
etc., - With ordinary cement without any pigment
093012 Providing top layer of floor, 6mm thick with whit 1 Sqm 164.24
etc., - With ordinary cement with pigment
093013 Providing top layer of floor, 6mm thick with whit 1 Sqm 256.50
etc., - With white cement with pigment
093021 Providing top layer of floor, 9mm thick with whit 1 Sqm 162.31
etc., - With ordinary cement without any pigment
093022 Providing top layer of floor, 9mm thick with whit 1 Sqm 184.89
etc., - With ordinary cement with pigment
093023 Providing top layer of floor, 9mm thick with whit 1 Sqm 316.55
etc., - With white cement with pigment
093031 Marble chips skirting (upto 30cm height) rubbed & 1 Sqm 391.98
etc., - 18mm thick with under layer 12mm thick
cement plaster 1:3 (1cement: 3coarse sand). with
ordinary cement
093032 Marble chips skirting (upto 30cm height) rubbed & 1 Sqm 407.81
etc., - 18mm thick with under layer 12mm thick
cement plaster 1:3 (1cement: 3coarse sand). with
ordinary cement and pigment
093033 Marble chips skirting (upto 30cm height) rubbed & 1 Sqm 500.07
etc., - 18mm thick with under layer 12mm thick
cement plaster 1:3 (1cement: 3coarse sand). with
white cement and pigment
093034 Marble chips skirting (upto 30cm height) rubbed & 1 Sqm 398.26
etc., - 21mm thick with under layer 12mm thick
cement plaster 1:3 (1cement: 3coarse sand). with
ordinary cement
093035 Marble chips skirting (upto 30cm height) rubbed & 1 Sqm 422.01
etc., - 21mm thick with under layer 12mm thick
cement plaster 1:3 (1cement: 3coarse sand). with
ordinary cement and pigment
093036 Marble chips skirting (upto 30cm height) rubbed & 1 Sqm 560.40
etc., - 21mm thick with under layer 12mm thick
cement plaster 1:3 (1cement: 3coarse sand). with
white cement and pigment
093040 Extra for laying terrazzo in narrow bands not 1 metre 1.45
exceeding 7.5cm in width
093050 Extra for terrazzo flooring laid as floor borders, 1 Sqm 13.77
margins and similar bands exceeding 7.5cm but
not exceeding 30cm in width
TERRAZO TILES 1
094010 Providing and laying precast factory made terrazzo 1
tiles 22mm thick with graded marble chips of size
upto 12mm laid in floors and landings, jointed
with neat cement slurry mixed with pigment to
match the shade of the tiles including rubbing and
polishing complete with precast tiles on 20mm
thick bed of cement mortar 1:4 (1cement: 4coarse
sand)
094011 Providing and laying precast factory made terraz 1 Sqm 419.74
etc., - With ordinary cement without any pigment
094012 Providing and laying precast factory made terraz 1 Sqm 452.75
etc., - With ordinary cement with pigment
094013 Providing and laying precast factory made terraz 1 Sqm 604.07
etc., - With white cement with pigment
094020 Extra if terrazzo tiles are laid in treads of steps not 1 Sqm 26.67
exceeding 30cm in width
094030 Precast factory made terrazzo tiles 22mm thick 1
with graded marble chips of size upto 12mm in
walls, skirting and risers of steps on 12mm thick
cement plaster 1:3 (1cement: 3coarse sand)
jointed with neat cement slurry mixed with
pigment to match the shade of the tiles including
cutting/wastage of tiles, rubbing and polishing
complete with tiles made :
094031 Precast factory made terrazzo tiles 22mm thick wit 1 Sqm 414.53
etc., - With ordinary cement without any pigment
094032 Precast factory made terrazzo tiles 22mm thick wit 1 Sqm 447.53
etc., - With ordinary cement with pigment
094033 Precast factory made terrazzo tiles 22mm thick wit 1 Sqm 648.97
etc., - With white cement with pigment
094061 Providing & fixing Precast Chequered tiles conform 1 Sqm 478.93
etc., - 250mm x 250mm x 25mm thick
094062 Providing & fixing Precast Chequered tiles conform 1 Sqm 574.75
etc., - 300mm x 300mm x 30mm thick
094063 Providing & fixing Precast Chequered tiles conform 1 Sqm 670.58
etc., - 400mm x 400mm x 35mm thick
094071 Providing and fixing 10mm thick heavy duty etc., - 1 Sqm 824.31
In flooring on a bed of 10mm thick mortar 1:4 (1
Appropriate cement : 4 coarse sand)
094072 Providing and fixing 10mm thick heavy duty etc., - 1 Sqm 889.75
In dado/skirting on 12mm thick mortar 1:4 (1
Appropriate cement : 4 coarse sand)
094080 Tile work in skirting, risers of steps and dado 1 Sqm 566.40
(upto
2m height) over 12mm thick bed of cement
mortar
1:3 (1 cement : 3 coarse sand) and jointed with
grey cement slurry @ 3.3kg/Sqm including
pointing in white cement mixed with pigment of
matching shade complete with - Marble tiles
(polished) Raj Nagar
8mm thick
CERAMIC TILES : 1
095010 Providing and fixing Ist quality ceramic tiles 1
conforming to Group B-III (Ceramic Wall Tiles) of
IS:15622 of manufacturers approved by railway in
all colours, shades, and design as approved by the
Engineer-in-Charge in skirting, risers of steps and
dado over 12mm thick bed of cement mortar 1:3
(1cement: 3coarse sand) including pointing in
white cement mixed with pigment of matching
shade complete
095011 Providing and fixing Ist quality ceramic etc., - 1 Sqm 528.43
200x200 mm
095012 Providing and fixing Ist quality ceramic etc., - 1 Sqm 528.39
200x300 mm
095013 Providing and fixing Ist quality ceramic etc., - 1 Sqm 671.29
300x450 mm and above
095021 Providing and fixing ceramic tiles conforming etc., 1 Sqm 477.57
- Of Group B-II Clause 5.1 (for abrasion
resistance) of
IS:15622 (Ceramic Floor Tiles) of size
300x300mm
095022 Providing and fixing ceramic tiles conforming etc., 1 Sqm 513.29
- Of Group B-II Clause 5.1 (for abrasion
resistance) of IS:15622 (Ceramic Floor Tiles) of
size 400x400mm and above
095023 Providing and fixing ceramic tiles conforming etc., 1 Sqm 656.15
- Of Group B-I-b of IS : 15622 (Ceramic Tiles) of
size
200x200mm to 400x400mm
095024 Providing and fixing ceramic tiles conforming etc., 1 Sqm 656.15
- Of Group B-I-b of IS : 15622 (Ceramic Tiles) of
size above 400x400mm
095025 Providing and fixing ceramic tiles conforming etc., 1 Sqm 715.68
- Of Group B-I-a of IS : 15622 (Vitrified tiles) of
size upto 400x400 mm
095026 Providing and fixing ceramic tiles conforming etc., 1 Sqm 775.21
- Of Group B-I-a of IS : 15622 (Vitrified tiles) of
size above 400x400mm upto 600x600 mm
095027 Providing and fixing ceramic tiles conforming etc., 1 Sqm 953.79
- Of Group B-I-a of IS : 15622 (Vitrified tiles) of
size
800x800mm and above
095030 Extra over items 095025 and 095026, if adhesive 1 Sqm 40.15
(recommended by manufacturer of tiles) of
specified thickness is used instead of cement
mortar
095040 Extra over basic items for using rectified tiles 1 Sqm 47.62
when specifically ordered
095050 Providing and fixing in floors 'rounded cove nosing' 1 Each 209.97
External & Interior Media ceramic tile of size 10cm
x
30cm having thickness not less than 8mm of
colour and shade, as approved by Engineer-in-
charge over
12mm thick cement mortar 1:3; complete work
including filling of joints with white or pigmented
cement
096011 Marble stone flooring with 18mm thick marble 1 Sqm 2658.08
stone etc., - Makrana White quality marble
096012 Marble stone flooring with 18mm thick marble 1 Sqm 1065.90
stone etc., - Rajnagar plain/Black Zebra/Udaipur
green marble / Pink plain marble
096013 Marble stone flooring with 18mm thick marble 1 Sqm 1693.69
stone etc., - Agaria White
096020 Extra for nosing in marble stone for treads, sills 1 Sqm 171.55
etc.
096040 Extra for marble stone flooring in treads of steps, 1 Sqm 186.32
not exceeding 30cm in width
096080 Kota stone slabs 25mm thick in risers of steps, 1 Sqm 839.19
skirting, dado and pillars laid on 12mm (average)
thick cement mortar 1:3 (1cement: 3coarse sand)
and jointed with grey cement slurry mixed with
pigment to match the shade of the slab, including
rubbing and polishing complete :
096090 Extra for nosing in steps and treads of kota stone 1 Sqm 152.12
slab.
096110 Extra for kota stone flooring in steps and treads 1 Sqm 179.04
not exceeding 30cm in width
096120 Providing flag stone (Neemuch, Shahabad, Kota, 1
etc) flooring unpolished over 20mm (average)
thick 1:4 cement mortar (1cement:4coarse sand)
base laid over and jointed with grey cement slurry
mixed with pigment to match the shade of the
slab complete including cement sand pointing 1:2
with pigment and cleaning etc complete
097011 40mm thick rough chisel dressed stone flooring 1 Sqm 310.55
ove etc., - Red sand stone
097012 40mm thick rough chisel dressed stone flooring 1 Sqm 336.10
ove etc., - White sand stone
097021 40mm thick fine dressed stone flooring over 1 Sqm 419.60
20mm
etc., - Red sand stone
097022 40mm thick fine dressed stone flooring over 1 Sqm 445.15
20mm
etc., - White sand stone
097032 40mm thick fine dressed and rubbed stone 1 Sqm 492.50
flooring etc., - White sand stone
097040 Extra over Items for nosing in steps and treads of 1 metre 52.27
sand stone
097050 Extra over sandstone flooring in steps and treads 1 Sqm 7.05
not exceeding 30cm in width
MISCELLANEOUS FLOORING 1
098010 Providing and laying stone setts flooring with 1
stone(Of igneous Origin) setts 15 cm thick laid flat
over 15 cm thick bed of sand (Ordinary)
098011 Providing and laying stone setts flooring with sto 1 Sqm 351.68
etc., - With joints thoroughly filled with ordinary
sand
098012 Providing and laying stone setts flooring with sto 1 Sqm 1198.90
etc., - With joints filled thoroughly with 1:6 mix
(by weight)
of bitumen and ordinary sand
098030 Extra over items for using plastic moulds if 1 Sqm 53.71
specifically ordered
098040 Extra over items for lacquer finish 1 Sqm 76.94
098050 Extra over Item 098010 for addition of pigment in 1 Sqm 28.35
concrete of paver blocks
098060 Providing and fixing homogeneous polyvinyl 1
chloride sheet/ tile in flooring and skirting in
approved pattern on a smooth and damp proof
base using rubber based adhesives of approved
quality and manufacturer like Dunlop S- 758,
Fevicol SR 998 or equivalent including rolling with
light wooden roller weighing about 5kg. all
complete as directed by the Engineer-in-Charge,
in approved colour and shade
098071 Providing and fixing rubber floor tiles with appr 1 Sqm 667.60
etc., - Plain rubber tiles conforming to IS:809
1.5mm thick
098072 Providing and fixing rubber floor tiles with appr 1 Sqm 844.01
etc., - Plain rubber tiles conforming to IS:809
2.0mm thick
098073 Providing and fixing rubber floor tiles with appr 1 Sqm 856.20
etc., - LP stud range conforming to IS:809 size
610x610mm,
2mm thick
098074 Providing and fixing rubber floor tiles with appr 1 Sqm 1380.62
etc., - LP stud range conforming to IS:809 size
610x610mm,
3mm thick
098075 Providing and fixing rubber floor tiles with appr 1 Sqm 1679.42
etc., - LP stud range conforming to IS:809 size
610x610mm,
4mm thick
098076 Providing and fixing rubber floor tiles with appr 1 Sqm 1295.25
etc., - Anti-static rubber tiles plain / stud
(conforming to BS:
2050 size 610x610mm, 2.0mm thick (Black only)
098081 Providing and laying vitrified ceramic paver etc., - 1 Sqm 775.21
100x100x15mm
098082 Providing and laying vitrified ceramic paver etc., - 1 Sqm 864.50
200x200x15mm
098083 Providing and laying vitrified ceramic paver etc., - 1 Sqm 894.26
300x300x15mm
098084 Providing and laying vitrified ceramic paver etc., - 1 Sqm 67.37
Deduct for using 12mm thick tile instead of 15mm
thick
098100 Providing and fixing aluminium strips 40mm deep 1 metre 64.30
and
2mm thick in joint of terrazzo floor
098110 Providing and fixing glass strips in joints of 1
terrazzo /
cement concrete floors
098111 Providing and fixing glass strips in joints of ter 1 metre 24.82
etc., - 40mm deep and 4mm thick
098112 Providing and fixing glass strips in joints of ter 1 metre 28.97
etc., - 40mm deep and 6mm thick
MARBLE WORK 1
099010 Marble work (table rubbed and polished) for wall 1
lining (veneer work), dado, skirting etc over
12mm thick cement mortar 1:3 (1cement:
3coarse sand) including pointing with white
cement mortar 1:2 (1white cement: 2marble dust)
with an admixture of pigment to match the marble
shade. (To be secured to the backing by means of
cramps, which shall be paid for separately) White
Marble – Raj Nagar Plain,18mm thick
099011 Marble work (table rubbed and polished) for etc., - 1 Sqm 1928.02
Area of slab 0.10 Sqm to 0.2 Sqm
099012 Marble work (table rubbed and polished) for etc., - 1 Sqm 1987.54
Area of slab over 0.2 Sqm but upto 0.5 Sqm
099013 Marble work (table rubbed and polished) for etc., - 1 Sqm 2092.77
Area of slab over 0.5 Sqm
099021 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 1139.65
- Area of each slab upto 0.10 Sqm
099022 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 1376.32
- Area of each slab over 0.10 Sqm but upto 0.20
Sqm
099023 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 1358.94
- Area of slab each over 0.20 Sqm but upto 0.50
Sqm
Abu plain white marble
099024 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 1343.56
- Area of each slab over 0.50 Sqm but upto 1.0
Sqm
099025 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 1343.07
- Area of each slab over1.0 Sqm
099031 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 2334.06
- Granite Black. Area of slab upto 0.10 Sqm
099032 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 2506.72
- Granite Black. Area of slab 0.10 Sqm to 0.2 Sqm
099033 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 2501.38
- Granite Black. Area of slab over 0.2 Sqm but
upto 0.5
Sqm
099034 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 2499.87
- Granite Black. Area of slab over 0.5 Sqm but
upto 1.0
Sqm
099035 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 2501.67
- Granite Black. Area of slab over 1.0 Sqm but
upto 2.0
Sqm or larger
099041 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 1895.01
- Granite Pink/Grey. Area of slab upto 0.10 Sqm
099042 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 2165.24
- Granite Pink/Grey. Area of slab 0.10 Sqm to 0.2
Sqm
099043 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 2153.80
- Granite Pink. Area of slab over 0.2 Sqm but upto
0.5
Sqm
099044 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 2152.29
- Granite Pink. Area of slab over 0.5 Sqm but upto
1.0
Sqm
099045 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 2141.89
- Granite Pink. Area of slab over 1.0 Sqm but upto
2.0
Sqm Or larger
099051 Providing and fixing 40mm thick Cuddapah sto 1 Sqm 1178.14
etc., - Area of slab upto 0.5 Sqm
099052 Providing and fixing 40mm thick Cuddapah sto 1 Sqm 1188.83
etc., - Area of slab over 0.5 Sqm but upto 1.0
Sqm
099053 Providing and fixing 40mm thick Cuddapah sto 1 Sqm 1202.82
etc., - Area of slab over 1 sqm but upto 2 sqm or
larger
099070 Extra for cutting groove upto 5mm wide and 6mm 1
deep for drip course
099071 Extra for cutting groove upto 5mm wide and 6mm 1 Sqm 95.08
de etc., - In Marble work
099072 Extra for cutting groove upto 5mm wide and 6mm 1 Sqm 166.33
de etc., - In Granite work
099073 Extra for cutting groove upto 5mm wide and 6mm 1 Sqm 143.78
de etc., - In Cuddapah stone
099080 Polished stone tile work for wall lining (dado) over 1
12mm thick bed of cement mortar 1:3, including
pointing in white cement with an admixture of
pigment to match the stone shade with tiles of all
size upto 300 x 300 mm
099081 Polished stone tile work for wall lining (dado) o 1 Sqm 1150.31
etc., - 8 mm thick pink/grey granite tiles
099082 Polished stone tile work for wall lining (dado) o 1 Sqm 1200.54
etc., - 8mm thick superior quality black granite
tiles
099083 Polished stone tile work for wall lining (dado) o 1 Sqm 1323.66
etc., - 8mm thick superior quality (RUBY Red)
granite tiles
099084 Polished stone tile work for wall lining (dado) o 1 Sqm 830.03
etc., - 8mm thick marble tiles
099090 Extra for fixing marble/granite stone over facia 1 metre 134.95
and drops of width upto 150mm with epoxy resin
based adhesive (Araldite or equivalent) including
cleaning etc. complete
099101 Extra for providing opening of required size and s 1 Each 131.18
etc., - Opening of area upto 100 sq cm Opening
099102 Extra for providing opening of required size and s 1 Each 423.59
etc., - Opening of area above 100 sq cm Opening
099130 Providing and fixing copper pins 7.5cm long of 1 Each 16.99
6mm diameter in cement mortar 1:2 (1cement: 2
fine sand) including making necessary chases
099140 Providing and fixing stone dowel 10x5x2.5cm cut 1 Each 17.67
to double wedge shape as per design in cement
mortar
1:2 (1 cement : 2 fine sand) including making
necessary chases
099150 Extra for provision of motif tiles on walls over item 1 Sqm 264.21
095010
099161 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 2147.00
- Granite Black. Area of slab upto 0.10 Sqm
099162 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 2319.75
- Granite Black. Area of slab 0.10 Sqm to 0.2 Sqm
099163 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 2319.78
- Granite Black. Area of slab over 0.2 Sqm but
upto 0.5
Sqm
099164 Providing and fixing 18mm thick mirror polis etc., 1 sqm 2315.10
- Granite Black. Area of slab over 0.5 Sqm but
upto 1.0
Sqm
099165 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 2321.26
- Granite Black. Area of slab over 1.0 Sqm but
upto 2.0
Sqm or larger
099172 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 1978.27
- Granite Pink/Grey. Area of slab 0.10 Sqm to 0.2
Sqm
099173 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 1972.20
- Granite Pink. Area of slab over 0.2 Sqm but upto
0.5
Sqm
099174 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 1967.52
- Granite Pink. Area of slab over 0.5 Sqm but upto
1.0
Sqm
099175 Providing and fixing 18mm thick mirror polis etc., 1 Sqm 1961.48
- Granite Pink. Area of slab over 1.0 Sqm but upto
2.0
Sqm Or larger
099186 Providing and fixing 25mm thick flame 1 Sqm 20% of respective
cut/machine etc., - Extra for providing 40mm thick items
flame cut granite in lieu of 25 mm from item
099181 to 099185
099190 Providing and fixing 40mm thick Cuddapah stone 1
polished, machine cut for floors and similar
locations of required size, laid over 20mm thick
base cement mortar 1:4 (1cement: 4coarse sand)
with joints treated with white cement, mixed with
matching pigment, epoxy touchups including
rubbing, curing etc. complete at all levels
099191 Providing and fixing 40mm thick Cuddapah sto 1 Sqm 992.99
etc., - Area of slab upto 0.5 Sqm
099192 Providing and fixing 40mm thick Cuddapah sto 1 Sqm 1004.05
etc., - Area of slab over 0.5 Sqm but upto 1.0
Sqm
099193 Providing and fixing 40mm thick Cuddapah sto 1 Sqm 1022.41
etc., - Area of slab over 1.0 Sqm but upto 2.0
Sqm or larger
099310 1
099320 1
CHAPTER - 10 : ROOFS AND CEILINGS 1
C G S SHEET ROOFING 1
101021 Extra for straight cutting in C.G.S. sheet roofing 1 metre 25.36
etc., - 1.00mm thick
101022 Extra for straight cutting in C.G.S. sheet roofing 1 metre 20.29
etc., - 0.80mm thick
101023 Extra for straight cutting in C.G.S. sheet roofing 1 metre 20.29
etc., - 0.63mm thick
101031 Extra for circular cutting in C.G.S. sheet roofing 1 metre 144.61
etc., - 1.00mm thick
101032 Extra for circular cutting in C.G.S. sheet roofing 1 metre 115.50
etc., - 0.80mm thick
101033 Extra for circular cutting in C.G.S. sheet roofing 1 metre 115.50
etc., - 0.63mm thick
101051 Providing valleys 90cm wide overall in plai etc., - 1 metre 753.54
1.60 mm thick with zinc coating not less than
350gm/ sqm
101052 Providing valleys 90cm wide overall in plai etc., - 1 metre 513.71
1.00 mm thick with zinc coating not less than
350gm/ sqm
101060 Providing flashing of 40cm overall width in plain, 1 metre 289.66
G.S. sheet, 1.00mm thick with zinc coating not
less than 275gm/ sqm., fixed with polymer coated
J or L hooks, bolts and nuts, G,I, limpet and
bitumen washer complete, bent to shape and fixed
in wall with cement mortar
1:3 (1cement: 3coarse sand)
101070 Providing and fixing 15cm wide 45cm over all semi 1
circular plain G.S. sheet gutter with iron brackets
40x3mm size, bolts, nuts and washers etc.
including making necessary connections with rain
water pipes complete
101071 Providing and fixing 15cm wide 45cm over all semi 1 metre 361.90
etc., - 0.80mm thick with zinc coating not less
than
275gm/ sqm
101072 Providing and fixing 15cm wide 45cm over all semi 1 metre 320.39
etc., - 0.63mm thick with zinc coating not less
than
275gm/ sqm
102020 Extra for straight cutting in A.C. corrugated, semi- 1 metre of 20.29
corrugated 6mm thick sheet roofing for making periphery
openings of area exceeding 40sq. decimeter for
chimney stacks, sky lights etc.
102030 Extra for circular cutting in A.C. corrugated/ semi- 1 metre of 56.05
corrugated 6mm thick sheet roofing for making periphery
openings of area exceeding 40 sq. Decimeter
102042 Providing and fixing ridges and hips in asbestos c 1 metre 233.75
etc., - Serrated or plain wing adjustable ridges
102043 Providing and fixing ridges and hips in asbestos c 1 metre 298.96
etc., - Close fitting adjustable ridges
102044 Providing and fixing ridges and hips in asbestos c 1 metre 233.77
etc., - North light adjustable ridges
102045 Providing and fixing ridges and hips in asbestos c 1 metre 233.74
etc., - Unserrated adjustable hips
102052 Providing and fixing asbestos cement roofing etc., 1 metre 133.99
- Eave‟s filler pieces
102053 Providing and fixing asbestos cement roofing etc., 1 metre 321.53
- North light and ventilator curves
102054 Providing and fixing asbestos cement roofing etc., 1 metre 229.04
- Barge boards
102055 Providing and fixing asbestos cement roofing etc., 1 Pair 125.34
- Ridge finials
102056 Providing and fixing asbestos cement roofing etc., 1 Each 238.28
- Curved barge boards for north light curves
102057 Providing and fixing asbestos cement roofing etc., 1 Each 379.04
- Expansion joints for ridges
102058 Providing and fixing asbestos cement roofing etc., 1 Each 291.99
- Expansion joints for north light curves
102059 Providing and fixing asbestos cement roofing etc., 1 metre 171.75
- S type louvers
103040 Extra for providing and fixing wind ties of 1 metre 101.96
40x6mm flat iron section complete with hooks,
nuts, washers etc.
103052 Providing and fixing ridges and hips in non etc., - 1 metre 369.01
Plain wing adjustable ridges
103053 Providing and fixing ridges and hips in non etc., - 1 metre 454.64
Close fitting adjustable ridges
103054 Providing and fixing ridges and hips in non etc., - 1 metre 381.74
Unserrated adjustable hips
103061 Providing and fixing non-asbestos fibre cement hig 1 metre 235.07
etc., - Corrugated Apron pieces
103062 Providing and fixing non-asbestos fibre cement hig 1 metre 159.53
etc., - Eave‟s filler pieces
103063 Providing and fixing non-asbestos fibre cement hig 1 metre 346.01
etc., - North light curves
103064 Providing and fixing non-asbestos fibre cement hig 1 metre 457.65
etc., - Ventilator Curves
103065 Providing and fixing non-asbestos fibre cement hig 1 metre 395.95
etc., - Barge boards
103066 Providing and fixing non-asbestos fibre cement hig 1 Pair 145.71
etc., - Ridge finials
103067 Providing and fixing non-asbestos fibre cement hig 1 metre 468.14
etc., - Special north light curves
103068 Providing and fixing non-asbestos fibre cement hig 1 metre 237.20
etc., - S type louvers
103070 Providing and fixing flat iron brackets 50x3mm 1 metre 33.35
size with necessary bolts, nuts and washers etc.
for fixing asbestos cement/ G.S. sheet gutters
with purlins to be fixed at suitable interval, as per
direction of engineer-in-charge
103091 Providing & fixing machine made UV stabilised fib 1 Sqm 804.49
etc., - 2mm thick corrugated / 2mm thick Profile
Sheets
103092 Providing & fixing machine made UV stabilised fib 1 Sqm 804.49
etc., - 2mm thick flat sheets
103093 Providing & fixing machine made UV stabilised fib 1 Rm 2108.55
etc., - Providing & fixing fibre glass reinforced
90cm wide, 4mm thick valley gutter, having two
coats of U/V stabilised gel coat as top coating
giving glossy smooth surface. To be fixed with
suitable clamp made of 25mm MS flat of 3mm
thickness, provided at 1m interval, complete with
required nuts/bolts
103100 Extra over item no. 103010, 103050 & 103060 for 1 Each 25% of the
using corrugated sheets and fittings having respective items
polyester coating of approved shade on the top
surface instead of natural cement colour sheets
and fittings
FLAT ROOFS
104050 Providing and laying pressed clay tiles (as per 1 Sqm 345.94
approved pattern 20mm nominal thickness and of
approved size) on roofs jointed with cement
mortar 1:4 (1cement: 4coarse sand) mixed with
2% integral water proofing compound laid over a
bed of 20mm thick cement mortar 1:4 (1cement:
4coarse sand) and finished neat complete
104080 Add or deduct over Items 104060 and 104070 for 1 Sqm 16.03
every additional/less 5mm thickness of lime
concrete terracing
104090 Extra over Items 104060, 104070 and 104080 for 1 Sqm 28.82
using LUNA, RTC or equivalent treatment in place
of Bel and Gur treatment. (Quantity to be used as
per specifications of the Manufacturer)
104100 Extra over Items 104060 and 104070 above floor 1 Sqm 38.22
two level for every floor or part thereof
104110 Picking upto a minimum depth of 50 mm including 1 cum 3003.77
a) removing dismantled concrete and thorough
cleaning and washing of exposed surface to make
it free of dislodged particles and dust and b)
redoing of lime concrete terracing with 20mm
nominal size brick aggregate and 50% lime mortar
1:2 (1lime putty: 2surkhi) rammed and finished
with gur and belgiri treatment complete trowelled
smooth to a polished finish– upto floor two level
104120 Extra over Items 104110 above floor two level for 1 cum 90.11
every floor or part thereof
104130 Providing gola 75x75mm in cement concrete 1 metre 64.83
1:2:4 (1cement: 2coarse sand: 4graded stone
aggregate 10mm and down gauge) including
finishing with cement mortar 1:3 (1cement:
3fine sand) as per standard design -in
75x75mm deep chase
104151 Providing sand stone slab for roofing and laying t 1 Sqm 357.58
etc., - Red sand stone slab, 40mm to 50mm thick
104152 Providing sand stone slab for roofing and laying t 1 Sqm 383.17
etc., - White sand stone slab, 40mm to 50mm
thick
WATER PROOFING 1
105010 Providing & laying water-proof treatment on roof 1 Sqm 259.71
slabs by applying after preparation, cement slurry
mixed with Tapecrete acrylic based polymer water
proofing compound (having solid content 30% ±
2, pH >7) in a ratio of 2:1 (2 cement : 1 water
proofing compound), followed by laying of fibre
glass cloth; 2nd coat of cement slurry mixed with
acrylic based polymer water proofing compound
and a final coat of water proofing compound brush
topping having water proofing compound, cement
and c/sand
@ 1:2:2 by weight. Complete job to be carried out
as per specifications
105020 Providing & laying corner fillet (Gola) 1 metre 21.99
25mmx25mm size at junction of walls & slab and
pipe joints sealing by cement sand mortar
1:3 mixed with Tapecrete acrylic based polymer
water proofing compound (having solid content
30% ± 2, pH >7) at 0.5% of cement by weight.
105030 Painting top of roofs with residual type petroleum 1 Sqm 109.84
bitumen of penetration 80/100 of approved quality
at 17kg per 10 sqm impregnated with a coat of
coarse sand at 60 cudm. Per 10sqm. including
cleaning the slab surface with brushes and finally
with a piece of cloth lightly soaked in kerosene oil
complete
105040 Providing and laying four courses water proofing 1 Sqm 321.45
treatment with bitumen felt over roofs consisting
of 1st and 3rd courses of blown bitumen 85/ 25 or
90/ 15 conforming to IS: 702 applied hot @
1.45kg/sqm of area for each course, 2nd course of
roofing felt type 3 grade-I (Hessian base self
finished bitumen felt) conforming to IS:1322 and
4th and final course of stone grit 6mm and down
size or pea-sized gravel spread at 6 cudm/sqm
including preparation of surface but excluding
grading complete
105050 Providing and laying six courses water proofing 1 Sqm 529.78
treatment with bitumen felt over roofs consisting
of first, third and fifth course of blown bitumen
85/ 25 or 90/ 15 conforming to IS: 702 applied
hot @ 1.45, 1.20 and 1.45 kg/sqm of area
respectively, second and fourth courses of roofing
felt type 3 grade I conforming to IS: 1322
(Hessian based self finished bitumen felt)
conforming to IS: 1322 and sixth and final course
of stone grit 6mm and down size or pea- sized
gravel spread at
6cudm/sqm including preparation of surface but
excluding grading complete
105060 Providing and laying six courses water proofing 1 Sqm 454.91
treatment with bitumen felt over roofs consisting
of first, third and fifth courses of blown or/ and
residual bitumen applied hot at
1.45, 1.20 and 1.70kg per square metre of area
respectively, second and fourth courses of roofing
felt type 2 grade I (fibre base self finished
bitumen felt) sixth and final course of stone grit
6mm and down size or pea-sized gravel spread at
6cudm/sqm including preparation of surface,
excluding grading complete
105070 Providing and laying six courses water proofing 1 Sqm 455.69
treatment with bitumen felt over roofs consisting
of first, third and fifth courses of blown or/ and
residual bitumen applied hot at
1.45, 1.20 and 1.70kg/sqm of area respectively,
second and fourth courses of roofing felt type 2
grade II (glass fibre base self finished bitumen
felt) and sixth and final course of stone grit
6mm and down size or pea-sized gravel spread at
6cudm/sqm including preparation of surface but
excluding grading, complete
105110 Providing and laying in situ over roofs seven 1 Sqm 476.60
course water proofing treatment with APP (Atactic
Poly Propylene) modified Polymeric membrane
1.5mm thick of 2.25kg/sqm weight.7th, the top
most layer shall be of specified surface finish
which shall be paid for separately
105120 Providing and laying in situ over roofs five course 1 Sqm 387.85
water proofing treatment with APP (Atactic Poly
Propylene) modified Polymeric membrane 2.0mm
thick of 3.00kg/sqm weight.5th, the top most
layer shall be of specified surface finish which shall
be paid for separately
105130 Providing and laying in situ over roofs seven 1 Sqm 540.49
course water proofing treatment with APP (Atactic
Poly Propylene) modified Polymeric membrane
2.0mm thick of 3.00kg/sqm weight.7th, the top
most layer shall be of specified surface finish
which shall be paid for separately
105170 Cutting to 'V' section, cleaning and washing cracks 1 metre 12.02
for repairs to roof. Grouting with cement slurry
1:1 and plastering over crack with cement mortar
1:3
105180 Cutting to 'V' section, cleaning and washing cracks 1 metre 20.88
for repairs to roof. Grouting with special
compound such as valamoid or any other similar
compound
105191 Grading roof for water proofing treatment with- 1 cum 2076.95
etc., - Cement concrete 1:2:4 (1 cement, 2
coarse sand and 4 graded stone aggregate of
20mm nominal size)
105192 Grading roof for water proofing treatment with- 1 cum 1801.90
etc., - Cement mortar 1:3 (1 cement, 3 coarse
sand)
CEILING : 1
106010 Providing and fixing insulating board ceiling of 1
approved quality as per IS:3348 with necessary
nails etc. complete (frame work to be paid
separately)
106031 Extra for circular cutting and waste in ceiling w 1 Sqm 131.26
etc., - Insulating board
106032 Extra for circular cutting and waste in ceiling w 1 Sqm 140.16
etc., - Particle board
106040 Extra over 106011 to 106013 and 106020 for 1 Sqm 97.71
providing and fixing ceiling to curved surfaces in
narrow widths
106050 Providing and fixing false ceiling with 12mm thick 1 Sqm 241.21
plain/semi perforated or with design ceiling tiles of
BWP type phenol formaldehyde synthetic resin
bonded pressed particle board conforming to
IS:3087 finished with a coat of aluminium primer
on both sides & edges and two coats of synthetic
enamel paint of approved quality on exposed face
fixed to a grid made out of anodised aluminium
(with 15 micron anodic coating) T-sections 35 x 15
x 1.5mm size main runners and cross runners
23.5x19x1.5 mm fixed to main runners placed 600
mm centre to centre both ways so as to form a
grid of 600 mm square. The frame work shall be
suspended from ceiling by level adjusting hangers
of 6mm dia M.S. rod fixed to roof slab by means
of ceiling cleats. The suspenders shall be placed
600 x 1200 mm centre to centre including fixing to
the frame with C.P. brace screws and applying a
priming coat of zinc chromate yellow primer
(aluminium frame work and hangers shall be paid
separately)
106060 Extra for providing 3mm thick translucent white 1 Sqm 643.47
acrylic plastic sheets of approved quality in false
ceiling instead of 12mm thick plain/ or with design
particle board ceiling tiles in Item
106050
106090 Providing and fixing Tiled False Ceiling Tiles of 1 Sqm 398.46
approved materials of size 595x595mm in true
horizontal level suspended on interlocking metal
grid of galvanized steel sections (galvanized @
170gsm/sqm) consisting of main “T” runners
suitably spaced at joints to get required length
and of size 24x38mm made from 0.30mm thick
(minimum) sheet spaced at 1200mm centre to
centre and cross “T” of size 24x25mm made of
0.3mm thick (min.) sheet, 1200mm longspaced
between main “T” at 600mm centre to centre to
form a grid of 1200x600mm and secondary cross
“T” of length 600mm and size 24x25mm made of
0.30mm thick minimum sheet to be interlocked at
middle of the
1200x600mm panel to form grids of
600x600mm wall angle of size 21x21x 3mm and
laying false ceiling tiles of approved texture in the
grid including, wherever required, cutting/making
openings for services like diffusers, grills, light
fittings, fixtures, smoke detectors etc.
106100 Providing and fixing at all height false ceiling of 1 Sqm 680.61
12.5mm thick tapered edge gypsum board
conforming to IS: 2095-Part I, including providing
and fixing of frame work made of special sections
power pressed from M.S. sheet and galvanised
with zinc coating of grade 350 as per IS: 277 and
consisting of angle cleats of size 25mm x 1.6mm
with flanges of 22mm and
37mm at 1200mm centre to centre one flange
fixed to the ceiling with stener 12.5mm dia x
40mm long with 6mm dia bolts to the angle
hangers of 25x25x0.55mm of required length, and
other end of angle hanger being fixed with nut and
bolts to G.I. channels
45x15x0.9mm running at the rate of 1200mm
centre to centre to which the ceiling section
0.5mm thick bottom wedge of 80mm with tapered
flanges of 26mm each having clips of
10.5mm at 450mm centre to centre shall be
fixed in a direction perpendicular to G.I. channel
with connecting clips made out of 2.64mm dia x
230mm long G.I. wire at every junction including
fixing the gypsum board with ceiling section and
perimeter channels 0.5mm thick
27mm high having flanges of 20mm and 30mm
long, the perimeter of ceiling fixed to wall/
partition with the help of rawl plugs at 450mm
centre to centre with 25mm long drive-all screws
@ 230mm interval including jointing and fixing to
a flush finish of tapered and square edges of the
gypsum board with recommended filler, paper
tapes, finisher and two coats of primer suitable for
gypsum board as per manufacturers specification
and also including the cost of making openings for
light fittings, grills, diffusers, cutouts made with
106110 Providing 10mm thick Plaster of Paris (gypsum 1
anhydrous) ceiling upto a height of 5m above floor
level over 1st class kail or similar wood strips
25x6mm with 10mm gap in between and
reinforced with rabbit wire mesh fixed to wooden
frame (frame work to be paid separately)
106120 Extra for any sunk or raised Moulding in the 1 Sqm 188.25
Plaster of Paris (gypsum anhydrous) ceiling
106210 Dismantling and removing old wooden ceiling and 1 Sqm 42.20
stacking upto 50 metres or part thereof
TILED ROOFS 1
107010 Supplying and fixing R.P Tiled roofing or roofing 1 Sqm 433.09
with the similar pattern of tiles on roof over
wooden or angle battens (wooden or angle battens
and laying ridge and hip tiles to be paid
separately) excluding lacing with Contractor's tiles
107011 Supplying and fixing R.P Tiled roofing or roofing 1 Sqm 272.31
etc., - Supplying and fixing Single layer Country
tiled roofing including split bamboo battens
107012 Supplying and fixing R.P Tiled roofing or roofing 1 Sqm 544.61
etc., - Supplying and fixing Double layer Country
tiled roofing including split bamboo battens
107020 Supplying and fixing Thatch Roofing 15 Cm thick 1 Sqm 171.60
in two layers with bamboo lining in both directions
23 cm apart and tying complete
107030 Supplying and fixing Mangalore, R.P. or any other 1 metre 88.55
similar type ridge or hip on cement mortar 1:4
107040 Extra for lacing RP or Mangalore tiles or any other 1 metre 22.97
similar tiles with contractor‟s wire. (1.6 mm)
107050 Cement sand mortar ridging or hip to R.P. tiled 1 metre 94.30
roof (1:2)
107060 Taking down and stacking Raniganj Pattern tiles 1 Sqm 23.57
properly, single layer Labour rates only
107070 Taking down and stacking Raniganj pattern tiles 1 Sqm 41.17
properly, double layer. Labour rates only
107130 Providing & laying pressed clay tile ridge 1 Sqm 204.33
(Mangalore tile) of 20mm thickness of approved
pattern ceiling over steel frame work complete
(steel frame work to be paid separately)
108011 Providing and fixing 100mm diameter rain water 1 Each 47.47
spo etc., - Stone ware spout 60cm long
108012 Providing and fixing 100mm diameter rain water 1 Each 152.92
spo etc., - Unreinforced concrete pipe 60cm long
108020 Providing and fixing M.S. holder bat clamps of 1
approved design to C.I. or S.C.I. rain water pipes
embedded in and including cement concrete
blocks 10x10x10cm of 1:2:4 mix (1cement:
2coarse sand: 4graded stone aggregate 20mm
nominal size) and cost of cutting holes and making
good the walls etc.
108021 Providing and fixing M.S. holder bat clamps of ap 1 Each 93.75
etc., - 75 mm dia.
108022 Providing and fixing M.S. holder bat clamps of ap 1 Each 105.13
etc., - 100mm dia.
108023 Providing and fixing M.S. holder bat clamps of ap 1 Each 110.62
etc., - 150mm dia.
108030 Providing, erecting and fixing on wall face S.C.I 1
rain water pipes including filling of joints with spun
yarn soaked in neat cement slurry and cement
mortar 1:2 (1cement: 2fine sand)
108031 Providing, erecting and fixing on wall face S.C.I 1 metre 500.00
etc., - 75 mm dia.
108032 Providing, erecting and fixing on wall face S.C.I 1 metre 569.99
etc., - 100mm dia.
108033 Providing, erecting and fixing on wall face S.C.I 1 metre 1109.25
etc., - 150mm dia.
108041 Providing, fixing and embedding cast iron (S&S) Cl 1 metre 632.11
etc., - 75 mm dia.
108042 Providing, fixing and embedding cast iron (S&S) Cl 1 metre 800.32
etc., - 100mm dia.
108043 Providing, fixing and embedding cast iron (S&S) Cl 1 metre 1294.81
etc., - 150mm dia.
108050 Providing lead caulked joints to sand cast iron rain 1
water pipes and fittings
108051 Providing lead caulked joints to sand cast iron r 1 Each 122.46
etc., - 75 mm dia.
108052 Providing lead caulked joints to sand cast iron r 1 Each 157.85
etc., - 100mm dia.
108053 Providing lead caulked joints to sand cast iron r 1 Each 218.00
etc., - 150mm dia.
108060 Providing erecting and fixing in position on wall 1
face C.I accessories for rain water pipes including
filling the joints with spun yarn soaked in neat
cement slurry and cement mortar 1:2 (1cement:
2fine sand)
108071 Providing erecting and fixing etc., CI Head Flat o 1 Each 98.61
etc., - 75 mm dia.
108072 Providing erecting and fixing etc., CI Head Flat o 1 Each 122.42
etc., - 100mm dia.
108073 Providing erecting and fixing etc., CI Head Flat o 1 Each 142.34
etc., - 150mm dia.
108081 Providing erecting and fixing etc., CI Plain Shoes 1 Each 121.61
etc., - 75 mm dia.
108082 Providing erecting and fixing etc., CI Plain Shoes 1 Each 162.84
etc., - 100mm dia.
108083 Providing erecting and fixing etc., CI Plain Shoes 1 Each 247.81
etc., - 150mm dia.
108101 Providing erecting and fixing etc., CI Offset (Pla 1 Each 151.81
etc., - 75 mm dia, 55mm projection
108102 Providing erecting and fixing etc., CI Offset (Pla 1 Each 201.17
etc., - 100mm dia, 55mm projection
108103 Providing erecting and fixing etc., CI Offset (Pla 1 Each 331.26
etc., - 150mm dia, 55mm projection
108104 Providing erecting and fixing etc., CI Offset (Pla 1 Each 168.07
etc., - 75 mm dia, 150mm projection
108105 Providing erecting and fixing etc., CI Offset (Pla 1 Each 217.43
etc., - 100mm dia, 150mm projection
108106 Providing erecting and fixing etc., CI Offset (Pla 1 Each 364.36
etc., - 150mm dia, 150mm projection
108111 Providing erecting and fixing etc., C.I Slotted V 1 Each 127.36
etc., - 75 mm dia.
108112 Providing erecting and fixing etc., C.I Slotted V 1 Each 170.97
etc., - 100mm dia.
108113 Providing erecting and fixing etc., C.I Slotted V 1 Each 255.94
etc., - 150mm dia.
108121 Providing, fixing & embedding sand cast iron plai 1 Each 120.97
etc., - 75 mm dia.
108122 Providing, fixing & embedding sand cast iron plai 1 Each 162.84
etc., - 100mm dia.
108123 Providing, fixing & embedding sand cast iron plai 1 Each 238.98
etc., - 150mm dia.
108131 Providing, fixing and embedding sand cast iron co 1 Each 150.82
etc., - 75 mm dia.
108132 Providing, fixing and embedding sand cast iron co 1 Each 183.92
etc., - 100mm dia.
108133 Providing, fixing and embedding sand cast iron co 1 Each 260.12
etc., - 150mm dia.
108141 Providing, fixing and embedding sand cast iron br 1 Each 169.17
etc., - 75 mm dia single branch
108142 Providing, fixing and embedding sand cast iron br 1 Each 209.82
etc., - 75 mm dia double branch
108143 Providing, fixing and embedding sand cast iron br 1 Each 210.41
etc., - 100mm dia single branch
108144 Providing, fixing and embedding sand cast iron br 1 Each 252.22
etc., - 100mm dia double branch
108145 Providing, fixing and embedding sand cast iron br 1 Each 336.54
etc., - 150mm dia single branch
108146 Providing, fixing and embedding sand cast iron br 1 Each 377.20
etc., - 150mm dia double branch
108151 Providing, fixing & embedding sand cast iron offs 1 Each 152.91
etc., - 75 mm dia, 55mm projection
108152 Providing, fixing & embedding sand cast iron offs 1 Each 186.01
etc., - 100mm dia, 55mm projection
108153 Providing, fixing & embedding sand cast iron offs 1 Each 276.61
etc., - 150mm dia, 55mm projection
108154 Providing, fixing & embedding sand cast iron offs 1 Each 169.17
etc., - 75 mm dia, 150mm projection
108155 Providing, fixing & embedding sand cast iron offs 1 Each 210.41
etc., - 100mm dia, 150mm projection
108156 Providing, fixing & embedding sand cast iron offs 1 Each 309.71
etc., - 150mm dia, 150mm projection
108191 Providing and fixing unplasticised- PVC pipe etc., - 1 Each 113.68
75mm
108192 Providing and fixing unplasticised- PVC pipe etc., - 1 Each 134.59
110mm
108200 Providing and fixing to the inlet mouth of rain 1 Each 29.22
water pipe cast iron grating 15cm dia and
weighing not less than 440 grams
108212 Providing & Fixing Bamboo Mat Board etc., - 4 mm 1 Sqm 790.26
thickness
108213 Providing & Fixing Bamboo Mat Board etc., - 6 mm 1 Sqm 1023.03
thickness
108214 Providing & Fixing Bamboo Mat Board etc., - 9 mm 1 Sqm 1295.59
thickness
108215 Providing & Fixing Bamboo Mat Board etc., - 12 1 Sqm 1564.96
mm thickness
109041 Water proofing Surface treatment inside walls and 1 Sqm 401.37
etc., - Inside Tunnel Surface
109042 Water proofing Surface treatment inside walls and 1 Sqm 392.54
etc., - Inside Water Reservoir
109050 Water proofing of roofs and exposed concrete 1 Sqm 320.61
surfaces by cleaning and preparing the surfaces by
acid etching; treating it with a two-layer plaster;
the first layer 5 mm thick with cement (OPC or
slag), admixed with an octadecanoic acid based
cementitious waterproofing compound in the
weight ratio of 50:3 for cement and waterproofing
compound; finally providing a 12 mm thick
cement-sand (1:4) plaster, enriched with
polyester fibre, and curing the plastered surface;
the treatment shall be impermeable under a
waterhead of
20.0 metres. (polyester triangular fibre and
removal of existing damaged waterproofing
system, PCC, Lime Terracing etc., if any, to be
paid extra under separate item)
109120 Providing and fixing at all heights false ceiling of 1 Sqm 1232.50
4mm thick phenol bonded Bamboo Mat board
(595mm X 595mm) conforming to IS : 13958-
1994 including providing and fixing of frame work
made of GI angle 25mm x 25mm x 0.4 mm thick
all around suitably fixed to wall with the help of
dash fastener and hanger frame (600mm x
600mm c/c) made GI Slotted Tee having powder
coating on bottom side (30mm x
25mm x 0.3mm thick for main member &
25mm x 25mm x 0.3mm for cross member)
connected to ceiling with 2.64mm GI wire and
anchor fastener at every junction and also
including the cost of making openings for light
fittings, grills, diffusers, cutouts made with frame
of perimeter channels suitably fixed all complete
as per specifications and direction of Engineer-in-
charge as a complete job
109160 Providing, erecting, laying and fixing in position for 1 Sqm 1141.15
roofing 2.5mm thick Bamboo - Jute (Natural Fibre)
thermoset composite ISO 9001-2000 certified
factory-made semi-corrugated sheets having Eco-
friendly, Bio-degradable, Maintenance free, Fire
Retardant, Weather (+100 °C to -30 °C), Water
(absorption 3% max) & Termite Proof and U.V.,
Alkali & diluted Acid (5%) resistance character of
Size 2440 ±
10mm in length and 1220 ± 10mm in width fixed
to purlins with GI „J‟ or „L‟ hooks 8 mm dia, GI
plain and bitumen washers etc. complete
109161 Providing, erecting, laying and fixing in position 1 metre 737.92
etc., - Supply and fixing of ISO 9001-2000
certified factory made Bamboo - Jute Composite
Ridges for semi-corrugated roofing sheets having
Eco- friendly, Bio-degradable, Maintenance free,
Fire Retardant, Weather (+100 °C to -30 °C),
Water (absorption 3% max) & Termite Proof and
U.V., Alkali & diluted Acid (5%) resistance
character of size 1220 ± 10mm in length, 300mm
to
350mm in width and 2.5mm thick, complete with
all fittings
109180 Providing and fixing of single skin self supported 1 Sqm 3350.49
secret fix aluminium standing seam roofing
system consisting of aluminium profile sheet in
65/400 mm manufactured from aluminum alloy
AA3004 and having 0.9 mm minimum thickness
with PVDF coating on exposed surface (colour as
approved by Engineer Incharge) having male and
female fixing arrangements, to be zipped together
and non-penetrative including fixing of L-25 ST
clips with thermal insulation pad at suitable
interval all over the top-hat/purlin fixed with SD
screws and stainless steel fasteners
109190 Providing and fixing PVC false ceiling tiles of 1 Sqm 890.03
required size in true horizontal levels suspended
on interlocking MS tube grid of section
25mmx25mmx1.2mm. PVC ceiling tiles should
have a section size of 6mmx250mm with wall
thickness of 0.8mm. Perimeter edge of tiles shall
be covered by extruded PVC corner beeding of size
9mm x 8mm x1 mm. MS tube section grid should
be properly secured with walls and anchored to
roof with the help of suitable clamps with
complete work
109271 Providing and fixing of plain formed 0.7 mm thick 1 R metre 1979.43
etc., - Upto 600 mm width (girth)
109272 Providing and fixing of plain formed 0.7 mm thick 1 R metre 2955.09
etc., - 601mm to 1200 mm width (girth)
109280 Supplying and installation including lifting to all 1 Sqm 874.54
heights as required, of 0.5 mm thick trapezoidal
aluminum sheets having cover width of 975 mm,
32 mm crest height, pitch of 195mm made of
Aluminum Manganese alloy 5754 grade in mill
finish. Fixing shall be done with self tapping, self
drilling screws of required TPI (24 or 14 or as
thickness of purlin) and length, with neutral EPDM
washer etc. complete
109291 Providing and fixing of plain formed 0.5 mm thick 1 R metre 2099.07
etc., - Upto 600 mm width (girth)
109292 Providing and fixing of plain formed 0.5 mm thick 1 R metre 3077.05
etc., - 601mm to 1200 mm width (girth)
109300 Extra over item no. 109280, if Stucco embossed 1 Sqm 92.92
finished aluminium sheets are used instead of
mill-finish sheets
109310 Extra over item nos. 109240 & 109280, for 1 Sqm 464.60
Aluminium sheets with 5 micron DFT primer on
both faces alongwith 20 micron & 5 micron DFT
Polyester colour coating on exposed & unexposed
surfaces respectively, instead of mill finish
109410 NS-210-96 Providing and fixing false celing with light 1 Sqm 946.33
weight calcium silicate celing tiles , of size
595X595X10mm with densified 1 The material should be
incomustible as per BS 476 Part IV
111071 12 mm cement plaster finished with a floating coat etc., - 1 Sqm 79.70
1:3 (1cement: 3fine sand)
111072 12 mm cement plaster finished with a floating coat etc., - 1 Sqm 80.63
1:4 (1cement: 4fine sand)
111081 15mm cement plaster on rough side of single or hal etc., - 1 Sqm 90.65
1:3 (1cement: 3fine sand)
111082 15mm cement plaster on rough side of single or hal etc., - 1 Sqm 90.65
1:4 (1cement: 4fine sand)
112070 Pebble dash plaster upto 10m height above ground 1 Sqm 165.10
level with a mixture of washed pebble or crushed stone
6mm to 12.5mm nominal size) dashed over and including
fresh plaster in two layers under layer
12mm cement plaster 1:4 (1cement: 4coarse sand) and
top layer 10mm cement plaster with cement mortar 1:3
(1cement: 3fine sand)
112080 Washed stone grit plaster on exterior walls of height 1 Sqm 234.07
upto 10m above level in two layers, under layer
12mm cement plaster 1:4 (1cement: 4coarse sand)
furrowing the under layer with scratching tool, applying
cement slurry on the under layer @ 2kg. of cement per
square meter, top layer 15mm cement plaster 1:1.2:2
(1cement:1.2coarse sand: 2stone chipping 10mm nominal
size) in panels with groove all around as per approved
pattern including scrubbing and washing, the top layer
with brushes and water to expose the stone chippings,
complete as per specification and direction of the
Engineer-in- Charge (payment for providing grooves shall
be made separately)
112090 Extra for washed stone grit plaster on exterior walls 1 Sqm 21.60
of height more than 10m from ground level for every
additional height of 3m or part thereof
112100 Extra for washed stone grit plaster on circular work 1 Sqm 31.61
not exceeding 6m in radius (in two coats)
112110 Extra for using white cement in place of ordinary 1 Sqm 209.07
cement in the top layer of the item of washed stone grit
plaster
112120 18mm plastering upto 10m height above ground 1 Sqm 441.05
level with terrazzo finish rubbed and polished complete,
under layer 12mm thick cement plaster
1:3 (1cement: 3coarse sand) and top layer 6mm thick
white, black, chocolate, grey, yellow or baroda green
marble chips of 3mm and down size laid in cement marble
powder mix 3:1 (3cement: 1marble powder) by weight in
proportion of 4:7 (4cement marble powder mix: 7marble
chips) by volume
112142 Extra if colour is added to grey or white cement i etc., - 1 Sqm 15.83
Black colour
112143 Extra if colour is added to grey or white cement i etc., - 1 Sqm 19.79
Blue or green colour
112150 Extra for 18mm thick terrazzo finish marble chips 1 Sqm 17.21
plastering circular work not exceeding 6metre
113012 12mm thick cement mortar bands in cement mortar 1 m long 1.66
1: etc., - Sunk Band plain x cm
113013 12mm thick cement mortar bands in cement mortar 1 m long 1.90
1: etc., - Raised Band plain x cm
113014 12mm thick cement mortar bands in cement mortar 1 m long 3.30
1: etc., - Moulded Band x cm
113021 18mm thick cement mortar band incl. cement 1 m long 1.83
etc., - Flush Band plain x cm
113022 18mm thick cement mortar band incl. cement 1 m long 2.02
etc., - Sunk Band plain x cm
113023 18mm thick cement mortar band incl. cement 1 m long 2.33
etc., - Raised Band plain x cm
113024 18mm thick cement mortar band incl. cement 1 m long 4.39
etc., - Moulded Band x cm
POINTING 1
114011 Pointing on brick work with cement mor etc., - 1 Sqm 51.04
Flush/Ruled/Struck or weathered pointing
114012 Pointing on brick work with cement mor etc., - Raised and 1 Sqm 83.99
cut pointing
114020 Pointing on brick/tile flooring with cement mortar 1
1:3 (1cement: 3fine sand)
114021 Pointing on brick/tile flooring with cement morta etc., - 1 Sqm 41.79
Flush pointing
114022 Pointing on brick/tile flooring with cement morta etc., - 1 Sqm 50.24
Ruled pointing
114041 Pointing on stone work with cement mortar 1: etc., - Flush/ 1 Sqm 78.05
Ruled pointing
114042 Pointing on stone work with cement mortar 1: etc., - 1 Sqm 142.75
Raised and cut pointing
114050 Raised and cut pointing on stone work in white 1 Sqm 186.21
cement mortar 1:3 (1white cement: 3marble dust)
114060 Deep grooved pointing on Coarse Rubble masonry 1:3 1 Sqm 125.51
114070 Flush Pointing on stone slab flooring with cement 1 Sqm 34.59
mortar 1:2 (1 cement : 2 fine sand)
114080 Flush Pointing on dry stone pitching in cement and 1 Sqm 21.55
sand (ordinary) 1:3
114101 Pointing on stone slab ceiling with cement mortar etc., - 1 Sqm 42.83
Flush pointing
114102 Pointing on stone slab ceiling with cement mortar etc., - 1 Sqm 47.97
Ruled pointing
114110 Extra for pointing on walls on the outside at height 1 Sqm 3.11
more than 10m from ground level for every additional
height of 3m or part thereof
115011 White washing with lime to give an even shade 1 Sqm 9.52
etc., - New work (three or more coats)
115012 White washing with lime to give an even shade 1 Sqm 4.72
etc., - Extra for using zinc oxide 75 gm per kg of lime for
final coat of white washing
115020 Lime wash on walls one coat with quick lime of 1 Sqm 3.61
approved quality
115031 Colour washing such as green, blue or buff to give etc., - 1 Sqm 11.83
New work (two or more coats) with a base coat of
white washing with lime
115032 Colour washing such as green, blue or buff to give etc., - 1 Sqm 11.95
New work (two or more coats) with a base coat of
whiting
115050 Distempering two or more coats on new work with 1 Sqm 34.67
1st quality acrylic washable distemper (ready mixed) of
approved manufacturer and of required shade and colour
complete as per manufacturer’s specification
115070 Extra over Item 115040, 115050 in case primer is 1 Sqm 25%
applied on gritted/ rough cast/ sand faced or alike rough
surfaces
115080 Finishing walls with Deluxe Multi surface paint 1 Sqm 78.26
system for interiors and exteriors using Primer as per
manufacturers specifications with two or more coats
applied @ 1.25ltr/10 sqm over and including one coat of
Special primer applied @ 0.75 ltr/10sqm
115090 Wall painting on new work with two or more coats 1 Sqm 53.05
of plastic emulsion paint of approved brand and
manufacture to give an even shade
115091 Wall painting on new work with two or more coats 1 Sqm 10.39
o etc., - Extra over Items for roller painting in lieu of
normal
brush painting if specifically ordered
115092 Wall painting on new work with two or more coats 1 Sqm 12.92
o etc., - Extra over Items for spray painting in lieu of
normal
brush painting if specifically ordered
115100 Painting one thin coat with white lead of approved 1 Sqm 29.74
brand and manufacture on wet or patchy portion of
plastered surfaces
115110 Finishing walls with water proofing cement paint of 1 Sqm 38.31
required shade two or more coats on new work applied @
3.84 Kg/10 sqm
115120 Cement washing single coat.(Ordinary Portland 1 Sqm 4.04
cement)
115130 Cement washing two coat.(Ordinary Portland 1 Sqm 6.40
cement)
115140 Finishing walls with textured exterior paint of 1 Sqm 114.40
required shade on new work (Two or more coats applied
@ 3.28 ltr/10 sqm) over and including base coat of water
proofing cement paint applied @ 2.20 kg/10sqm
115160 Finishing walls with Acrylic Smooth exterior paint 1 Sqm 73.95
with Silicone additives of required shade on new work
(Two or more coats applied @ 1.67ltr/10 sqm over and
including one coat of water proofing cement paint applied
@ 2.20 kg/10sqm
115170 Finishing walls with Acrylic Smooth Interior paint of 1 Sqm 74.34
required shade on new work (Two or more coats applied
@ 1.67 ltr/10 sqm over and including base coat of water
proofing cement paint applied @ 2.20 kg/10sqm
115200 Extra for applying water proofing cement paint as 1 Sqm 0.49
primer applied @ 2.2kg/10 sqm instead of primer for
exterior finishing
MISCELLANEOUS 1
116020 Rounding top of walls, 20/23 cm thick wall, with 1 metre 53.31
cement mortar 1 : 6 finish, with hearting of brick masonry.
(Ht at centre=10/11.5 cms)
116030 Rounding top of walls, 30/35 cm thick wall, with 1 metre 99.53
cement mortar 1: 6 finish, with hearting of 1: 3: 6 cement
concrete. (Ht at centre =15/17.5 cms)
116040 Fixing sharp glass pieces in cement mortar 1:4, 25 1 Sqm 106.62
mm, thick, on the top of brick masonry or stone masonry
compound walls (Glass pieces to be supplied by the
contractor)
116070 Finishing with Epoxy paint (two or more coats) at all 1 Sqm 106.56
locations prepared and applied as per manufacturer's
specifications including appropriate priming coat,
preparation of surface, etc. complete on concrete work
116080 Floor painting on new work with two or more coats 1 Sqm 58.26
of floor enamel paint of approved brand and manufacture
to give an even shade :
116100 Extra for providing and mixing water proofing 1 100 ml 13.07
compound (pH>7, Sp.Gravity 1.06±0.02, conforming to
IS:2645) in cement plaster @ 100ml per 50 kg cement
bag
116110 Extra for plastering exterior walls of height more 1 Sqm 20.85
than 10 m from ground level for every additional height of
3m or part thereof
116121 Extra for plastering on circular work not exceedin etc., - In 1 Sqm 10.23
one coat
116122 Extra for plastering on circular work not exceedin etc., - In 1 Sqm 15.65
two coats
116131 Extra for plastering done on moulding cornices or etc., - In 1 Sqm 147.99
one coat.
116132 Extra for plastering done on moulding cornices or etc., - In 1 Sqm 243.71
two coats.
116150 Extra for lining out plaster to imitate stone or 1 Sqm 23.71
concrete blocks walling.
116160 Extra for forming groove of uniform size from 1 Sqm 26.83
12x12mm and upto 25x15mm in plastered surface as per
approved pattern using wooden battens, nailed to the
under layer including removal of wooden battens, repairs
to the edges of plaster panel and finishing the groove
complete as per specifications and the direction of the
Engineer-in- Charge
117011 Pointing on brick work with lime surkhi mortar 1:2 etc., - 1 Sqm 63.38
Flush pointing
117012 Pointing on brick work with lime surkhi mortar 1:2 etc., - 1 Sqm 64.34
Ruled pointing
117013 Pointing on brick work with lime surkhi mortar 1:2 etc., - 1 Sqm 64.01
Struck or weathered pointing
117031 Pointing on tile brick work with lime mortar 1:2 1 Sqm 90.81
etc., - Flush pointing
117032 Pointing on tile brick work with lime mortar 1:2 1 Sqm 92.66
etc., - Ruled pointing
117033 Pointing on tile brick work with lime mortar 1:2 1 Sqm 91.06
etc., - Struck or weathered pointing
117051 White washing with lime to give an even shade 1 Sqm 7.65
etc., - Old work (two or more coats)
117052 White washing with lime to give an even shade 1 Sqm 5.63
etc., - Old work (one or more coats)
117061 White washing with whiting to give an even shade 1 Sqm 7.49
etc., - Old work (two or more coats)
117062 White washing with whiting to give an even shade 1 Sqm 5.53
etc., - Old work (one or more coats)
117071 Colour washing such as green, blue or buff to give etc., - 1 Sqm 7.76
Old work (two or more coats) with lime
117072 Colour washing such as green, blue or buff to give etc., - 1 Sqm 7.60
Old work (two or more coats) with whiting
117073 Colour washing such as green, blue or buff to give etc., - 1 Sqm 5.70
Old work (one or more coats) with lime
117074 Colour washing such as green, blue or buff to give etc., - 1 Sqm 5.60
Old work (one or more coats) with whiting
117081 Oil bound distemper after removing old white etc., - Two 1 Sqm 56.16
or more coat, to give an even shade
117082 Oil bound distemper after removing old white etc., - One 1 Sqm 45.46
or more coat, to give an even shade
117091 Plastic emulsion paint after removing white/colou etc., - 1 Sqm 76.31
Two or more coat, to give an even shade
117092 Plastic emulsion paint after removing white/colou etc., - 1 Sqm 58.01
One or more coat, to give an even shade
118010 Finishing Walls with Acrylic smooth exerior paint with 1 sqm 46.01
silicon additive on decorated wall surface of required
colour. Shade ,texture desidn with one coat applied @
0.87 litres per 10sqm, including preparation of surface
with all contractor's materials , labour, tools lead and lift,
tackles, scaffoldings ect. complete as directed by
engineer-in-charge
118030
118040
118050 1
118060 1
118070 1
118080 1
118090 1
118100 1
CHAPTER - 12 : PAINTING, POLISHING &
1
VARNISHING
PAINTING – SURFACES OTHER THAN MASONRY 1
121020 Painting wood work with Deluxe Multi Surfaces Paint of 1 Sqm 66.45
required shade. Two or more coat applied @ 0.90ltr/
10sqm over an under coat of primer, applied @ 0.75ltr/
10sqm of approved brand or manufacture
121030 Painting Steel work with Deluxe Multi Surface Paint to 1 Sqm 69.35
give an even shade. Two or more coats applied @ 0.90ltr/
10sqm over an under coat of primer applied @ 0.80ltr/
10sqm of approved brand or manufacture
121040 Finishing with Epoxy paint (two or more coats) at all 1 0 0.00
locations prepared and applied as per manufacturer’s
specifications including appropriate priming coat,
preparation of surface etc. complete
121041 Finishing with Epoxy paint (two or more coats) at etc., - 1 Sqm 106.77
On steel work
121051 Painting with synthetic enamel paint of approved b etc., - 1 Sqm 47.41
Two or more coats on new work
121052 Painting with synthetic enamel paint of approved b etc., - 1 Sqm 30.76
One or more coats on old work
121061 Painting with synthetic enamel paint of approved b etc., - 1 Sqm 70.42
Two or more coats on new work over an under coat of
suitable shade with ordinary paint of approved brand and
manufacture
121071 Painting on G.S. sheet with synthetic enamel etc., - New 1 Sqm 53.27
work (two or more coats) including a coat of approved
steel primer but excluding a coat of mordant solution
121072 Painting on G.S. sheet with synthetic enamel etc., - Old 1 Sqm 28.06
work (One or more coats)
121091 Painting with aluminium paint of approved br etc., - Two or 1 Sqm 39.64
more coats on new work
121092 Painting with aluminium paint of approved br etc., - One or 1 Sqm 25.54
more coats on old work
121101 Painting with acid proof paint of approved etc., - Two or 1 Sqm 56.84
more coats on new work
121102 Painting with acid proof paint of approved etc., - One or 1 Sqm 36.45
more coats on old work
121111 Painting with black anti-corrosive bitumas etc., - Two or 1 Sqm 40.15
more coats on new work
121112 Painting with black anti-corrosive bitumas etc., - One or 1 Sqm 26.50
more coats on old work
121120 Coal tarring two coat on new work using 0.16 and 0.12 1 Sqm 21.42
litre of coal tar per sqm in the first coat and second coat
respectively
121130 Coal tarring one coat on old work using 0.12 litre of coat 1 Sqm 12.70
tar per sqm
121140 Painting (one or more coats) with black Japan paint of 1 Sqm 26.53
approved brand and manufacture to give an even shade
121150 Painting two coats (excluding priming coat) with 1 Sqm 40.30
chocolate, red, grey or buff ready mixed paint of approved
quality, on steel or wood work
121160 Painting one coat with chocolate, red, grey or buff ready 1 Sqm 28.40
mixed paint of approved quality on steel or wood work
121170 Painting two coats (excluding priming coat) with white or 1 Sqm 40.30
green ready mixed paint of approved quality, on steel or
wood work
121180 Painting one coat with white or green ready mixed paint of 1 Sqm 31.45
approved quality on steel or wood work
121190 Spray painting with flat wall paint of approved quality 1 0 0.00
(excluding priming coat), to give an even shade
121191 Spray painting with flat wall paint of appr etc., - Two or 1 Sqm 56.08
more coats on new work
121192 Spray painting with flat wall paint of appr etc., - One or 1 Sqm 35.30
more coat on old work
121201 Spray painting with superior quality lacquer paint etc., - 1 Sqm 69.70
Two or more coats on new work
121202 Spray painting with superior quality lacquer paint etc., - 1 Sqm 56.39
One or more coat on old work
121211 Powder coating/50 microns by spray method for all etc., - 1 Sqm 34.32
Surfaces over 10 cm. in width/girth
121212 Powder coating/50 microns by spray method for all etc., - 1 metre 10.47
Surfaces upto 10 cm. in width/girth and not in conjunction
with similar painted surfaces
121213 Powder coating/50 microns by spray method for all etc., - 1 Each 10.08
Small articles not exceeding 0.1 sqm in area and not in
conjunction with similar painted surfaces
121220 Painting new work (two or more coats).with oil type wood 1 Sqm 17.90
preservative of approved brand and manufacture
121230 Providing and applying two coats of fire retardant paint 1 Sqm 267.62
unthinned on cleaned wood/ ply surface @ 1 litre per 3.5
sqm per coat including preparation of base surface as per
recommendations of manufacturer to make the surface
fire retardan
121240 Lettering with "Black Japan" paint (two coats) of approved 1 Each of 1 cm 1.50
brand and manufacture height
121250 Lettering with “Synthetic Enamel” paint (two coats) of 1 Each of 1 cm 1.53
approved brand and manufacture height
121260 Relettering with "Black Japan" paint (one coat) 1 Each of 1 cm 1.09
height
121270 Relettering with “Synthetic Enamel” paint (one coat) 1 Each of 1 cm 1.22
height
121280 Painting border lines upto 150 mm width with two coats of 1 Each of 1 cm 1.05
synthetic enamel paint height
122011 Painting (two or more coats) on rain water, soil, etc., - 1 metre 15.09
75mm diameter pipes
122012 Painting (two or more coats) on rain water, soil, etc., - 1 metre 22.15
100mm diameter pipes
122013 Painting (two or more coats) on rain water, soil, etc., - 1 metre 32.52
150mm diameter pipes
122020 Painting (one or more coats) on rain water, soil, waste and 1 0 0.00
vent pipes and fittings with black anticorrosive bitumastic
paint approved brand and manufacture on old work
122021 Painting (one or more coats) on rain water, soil, etc., - 1 metre 7.85
75mm diameter pipes
122022 Painting (one or more coats) on rain water, soil, etc., - 1 metre 10.34
100mm diameter pipes
122023 Painting (one or more coats) on rain water, soil, etc., - 1 metre 14.86
150mm diameter pipes
122030 Painting (two or more coats) on rain water, soil, waste and 1 0 0.00
vent pipes and fittings with synthetic enamel paint of
approved brand and manufacture and required colour/
anti corrosive black enamel paint of approved quality. over
a priming coat o
122031 Painting (two or more coats) on rain water, soil, etc., - 1 metre 16.45
75mm diameter pipes
122032 Painting (two or more coats) on rain water, soil, etc., - 1 metre 21.98
100mm diameter pipes
122033 Painting (two or more coats) on rain water, soil, etc., - 1 metre 32.78
150mm diameter pipes
122040 Painting one or more coat (on old work) on rain water, 1 0 0.00
soil, waste and vent pipes and fittings with synthetic
enamel paint of approved brand and manufacture and
required colour / anti corrosive black enamel paint of
approved quality
122041 Painting one or more coat (on old work) on rain wa etc., - 1 metre 6.72
75 mm dia. Pipe
122042 Painting one or more coat (on old work) on rain wa etc., - 1 metre 8.66
100 mm dia. pipe
122043 Painting one or more coat (on old work) on rain wa etc., - 1 metre 12.61
150 mm dia. Pipe
122050 Painting two coats on G.I. Pipes and fittings with synthetic 1 0 0.00
enamel white paint over a ready mixed priming coat, both
of approved quality
122051 Painting two coats on G.I. Pipes and fittings with etc., - 1 metre 5.55
15mm diameter pipe
122052 Painting two coats on G.I. Pipes and fittings with etc., - 1 metre 6.57
20mm diameter pipe
122053 Painting two coats on G.I. Pipes and fittings with etc., - 1 metre 8.63
25mm diameter pipe
122054 Painting two coats on G.I. Pipes and fittings with etc., - 1 metre 10.24
32mm diameter pipe
122055 Painting two coats on G.I. Pipes and fittings with etc., - 1 metre 12.11
40mm diameter pipe
122056 Painting two coats on G.I. Pipes and fittings with etc., - 1 metre 14.32
50mm diameter pipe
122060 Repainting one coat on G.I. Pipes and fittings with 1 0 0.00
synthetic enamel white paint of approved quality
122061 Repainting one coat on G.I. Pipes and fittings wit etc., - 1 metre 3.01
15mm diameter pipe
122062 Repainting one coat on G.I. Pipes and fittings wit etc., - 1 metre 3.54
20mm diameter pipe
122063 Repainting one coat on G.I. Pipes and fittings wit etc., - 1 metre 4.52
25mm diameter pipe
122064 Repainting one coat on G.I. Pipes and fittings wit etc., - 1 metre 5.01
32mm diameter pipe
122065 Repainting one coat on G.I. Pipes and fittings wit etc., - 1 metre 6.25
40mm diameter pipe
122066 Repainting one coat on G.I. Pipes and fittings wit etc., - 1 metre 7.40
50mm diameter pipe
122070 Painting G.I. Pipes (New work) and fittings with two coats 1 0 0.00
of anti-corrosive bitumastic paint of approved quality
122071 Painting G.I. Pipes (New work) and fittings with t etc., - 1 metre 3.64
15mm diameter pipe
122072 Painting G.I. Pipes (New work) and fittings with t etc., - 1 metre 4.33
20mm diameter pipe
122073 Painting G.I. Pipes (New work) and fittings with t etc., - 1 metre 5.51
25mm diameter pipe
122074 Painting G.I. Pipes (New work) and fittings with t etc., - 1 metre 6.61
32mm diameter pipe
122075 Painting G.I. Pipes (New work) and fittings with t etc., - 1 metre 7.52
40mm diameter pipe
122076 Painting G.I. Pipes (New work) and fittings with t etc., - 1 metre 9.02
50mm diameter pipe
122077 Painting G.I. Pipes (New work) and fittings with t etc., - 1 metre 12.95
80mm diameter pipe
123012 Painting, one coat , any shade as directed of appr etc., - 1 Sqm 14.97
With Zinc Chromate primer as per IS:104
123013 Painting, one coat , any shade as directed of appr etc., - 1 Sqm 23.03
With Synthetic Enamel paint.
123014 Painting, one coat , any shade as directed of appr etc., - 1 Sqm 15.29
With Aluminium paint as per IS:2339.
123021 Painting, Two coat , any shade as directed of appr etc., - 1 Sqm 28.33
With Red Oxide metal primer as per IS:123
123022 Painting, Two coat , any shade as directed of appr etc., - 1 Sqm 27.39
With Zinc Chromate primer as per IS:104
123023 Painting, Two coat , any shade as directed of appr etc., - 1 Sqm 41.48
With Synthetic Enamel paint.
123024 Painting, Two coat , any shade as directed of appr etc., - 1 Sqm 27.95
With Aluminium paint as per IS:2339.
123031 Painting, one coat, any shade as directed of appro etc., - 1 Sqm 14.08
With Red Oxide metal primer as per IS:123
123032 Painting, one coat, any shade as directed of appro etc., - 1 Sqm 14.63
With Zinc Chromate primer as per IS:104
123033 Painting, one coat, any shade as directed of appro etc., - 1 Sqm 27.62
With Synthetic Enamel paint
123034 Painting, one coat, any shade as directed of appro etc., - 1 Sqm 19.88
With Aluminium paint as per IS:2339
123041 Painting, Two coat, any shade as directed of appro etc., - 1 Sqm 35.48
With Red Oxide metal primer as per IS:123
123042 Painting, Two coat, any shade as directed of appro etc., - 1 Sqm 34.54
With Zinc Chromate primer as per IS:104
123043 Painting, Two coat, any shade as directed of appro etc., - 1 Sqm 48.62
With Synthetic Enamel paint
123044 Painting, Two coat, any shade as directed of appro etc., - 1 Sqm 35.10
With Aluminium paint as per IS:2339
123050 Painting (any shade as directed) with synthetic enamel 1 Sqm 72.40
paint of approved make and brand) telegraph OHE mast
number plate including lettering complete (single plate)
123060 Painting (any shade as directed) with synthetic enamel 1 Sqm 85.08
paint of approved make and brand telegraph OHE mast
number plate including lettering complete (double plate)
123070 Painting fire buckets with Synthetic Enamel paint two 1 Each 57.65
coats. (Inside and outside complete)
123080 Painting human figures on latrine walls with Synthetic 1 Each 38.66
Enamel paint two coats, including the background
complete
123090 Painting line clear apparatus with Synthetic Enamel paint 1 Each 201.55
two coats
123100 Painting Station Name boards (both sides) including 1 0 0.00
lettering on both sides two coats of synthetic enamel paint
to give an even shade
123101 Painting Station Name boards (both sides) includin etc., - 1 Each 193.55
Board area more than 2 sqm
123102 Painting Station Name boards (both sides) includin etc., - 1 Each 157.54
Board area upto 2 sqm
123110 Painting and lettering gradient posts, km posts, curve 1 Each 106.77
plates, boundary pillars/marks etc two coats (both sides)
along the railway tracks
124012 Varnishing with varnish of approved brand and manu etc., 1 Sqm 27.09
- On old work - one or more coats with copal varnish
124013 Varnishing with varnish of approved brand and manu etc., 1 Sqm 75.43
- On new work two or more coats glue sizing with spar
varnish or an under coat of flatting varnish
124014 Varnishing with varnish of approved brand and manu etc., 1 Sqm 30.27
- On old work one or more coats with spar varnish
124031 Polishing on wood work with ready made wax etc., - New 1 Sqm 53.51
work (two or more coats)
124032 Polishing on wood work with ready made wax etc., - Old 1 Sqm 27.09
work (one or more coats)
124040 Melamine polishing on wood work (one or more coats) 1 Sqm 51.62
124050 Varnishing with flatting varnish of approved brand and 1 Sqm 30.33
manufacture one or more coats on old work
124060 Oiling two coats with raw linseed oil 1 Sqm 28.80
124070 Oiling one coat with raw linseed oil 1 Sqm 18.79
124080 Bees waxing on wood work with local made wax polish 1 0 0.00
with proportion 2:1.1/2 : 1 : 1/2. (2 bees wax : 1.1/2
linseed oil :
1 turpentine oil :1/2 varnish by weight)
124081 Bees waxing on wood work with local made wax polis 1 Sqm 49.32
etc., - Two or more coats on new work
124082 Bees waxing on wood work with local made wax polis 1 Sqm 25.33
etc., - One or more coat on old work
125010 Removing old paint with paint remover of approved 1 Sqm 16.95
manufacture. Note : Payment under these items shall be
made only where complete removal of old paint or varnish
is ordered to be done and area to be paid under this item
shall be specified
125020 Removing old paint with caustic soda solution. The rate 1 Sqm 23.96
includes cost of labour, consumables, brushes, tools and
plants, ladders, scaffoldings, staging etc. (Including high
or special slung scaffolding if required as per site
conditions)
125030 Removing old paint with blow lamp. Note : Payment under 1 Sqm 35.86
these items shall be made only where complete removal
of old paint or varnish is ordered to be done and area to
be paid under complete removal of paint shall be specified
in advance in writing by E
125040 Cleaning and washing glasses / FRP sheets / Transparent 1 Sqm 10.47
sheets or like material in trusses, sky lights, north lights,
ventilators, of work shops and loco sheds or similar
structures. (It will include both the sides and
measurements will be for
125050 Supplying printing and fixing banner made of Flex Fibre 1 Sqm 98.73
Cloth with digital printing as per Railways approved
matter, colour, pattern etc. complete job
New Items To Be Added By Zonal Railway 1
126010 1
126020 1
126030 1
126040 1
126050 1
126060 1
126070 1
126080 1
126090 1
CHAPTER - 13 : WATER SUPPLY 1
131041 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 84.64
Pipe, 16mm OD
131042 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 111.31
Pipe, 20mm OD
131043 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 151.57
Pipe, 25mm OD
131044 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 223.66
Pipe, 32mm OD
131045 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 337.45
Pipe, 40mm OD
131046 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 459.76
Pipe, 50mm OD
131051 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 129.04
Pipe, 16mm OD
131052 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 151.69
Pipe, 20mm OD
131053 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 187.93
Pipe, 25mm OD
131054 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 252.85
Pipe, 32mm OD
131061 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 78.45
Pipe, 16mm OD (SDR-7.4)
131062 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 101.10
Pipe, 20mm OD (SDR-7.4)
131063 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 140.46
Pipe, 25mm OD (SDR-7.4)
131064 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 205.39
Pipe, 32mm OD (SDR-7.4)
131065 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 306.44
Pipe, 40mm OD (SDR-7.4)
131066 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 428.74
Pipe, 50mm OD (SDR-7.4)
131067 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 654.48
Pipe, 63mm OD (SDR-7.4)
131068 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 918.72
Pipe, 75mm OD (SDR-7.4)
131069 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-16 1 metre 1217.44
Pipe, 90mm OD (SDR-7.4)
131071 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-10 1 metre 1519.43
Pipe, 110mm OD (SDR-11)
131072 Providing and fixing 3 layer PP-R (Poly Pro etc., - PN-10 1 metre 3166.79
Pipe, 160mm OD (SDR-11)
131081 Providing and fixing Chlorinated Polyvinyl Ch etc., - 15mm 1 metre 121.88
nominal outer dia. Pipes
131082 Providing and fixing Chlorinated Polyvinyl Ch etc., - 20mm 1 metre 141.00
nominal outer dia. Pipes
131083 Providing and fixing Chlorinated Polyvinyl Ch etc., - 25mm 1 metre 174.22
nominal outer dia. Pipes
131084 Providing and fixing Chlorinated Polyvinyl Ch etc., - 32mm 1 metre 232.72
nominal outer dia. Pipes
131085 Providing and fixing Chlorinated Polyvinyl Ch etc., - 40mm 1 metre 329.15
nominal outer dia. Pipes
131086 Providing and fixing Chlorinated Polyvinyl Ch etc., - 50mm 1 metre 417.48
nominal outer dia. Pipes
131090 Providing and fixing Chlorinated Polyvinyl Chloride 1
(CPVC) pipes, having thermal stability for hot & cold water
supply including all CPVC plain & brass threaded fittings
including fixing the pipe with clamps at 1.00m spacing in
This includes jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting chases and
making good the same including testing of joints complete
as per direction of Engineer-in-Charge. Concealed work
including cutting chases and making good the walls etc.
131091 Providing and fixing Chlorinated Polyvinyl Ch etc., - 15mm 1 metre 162.26
nominal outer dia. Pipes
131092 Providing and fixing Chlorinated Polyvinyl Ch etc., - 20mm 1 metre 177.36
nominal outer dia. Pipes
131093 Providing and fixing Chlorinated Polyvinyl Ch etc., - 25mm 1 metre 210.57
nominal outer dia. Pipes
131094 Providing and fixing Chlorinated Polyvinyl Ch etc., - 32mm 1 metre 261.91
nominal outer dia. Pipes
131101 Providing and fixing Chlorinated Polyvinyl Ch etc., - 15mm 1 metre 111.67
nominal outer dia. Pipes
131102 Providing and fixing Chlorinated Polyvinyl Ch etc., - 20mm 1 metre 126.77
nominal outer dia. Pipes
131103 Providing and fixing Chlorinated Polyvinyl Ch etc., - 25mm 1 metre 163.11
nominal outer dia. Pipes
131104 Providing and fixing Chlorinated Polyvinyl Ch etc., - 32mm 1 metre 214.45
nominal outer dia. Pipes
131105 Providing and fixing Chlorinated Polyvinyl Ch etc., - 40mm 1 metre 298.13
nominal outer dia. Pipes
131106 Providing and fixing Chlorinated Polyvinyl Ch etc., - 50mm 1 metre 386.46
nominal outer dia. Pipes
131121 Providing and fixing Chlorinated Polyvinyl Ch etc., - 75mm 1 metre 501.97
nominal outer dia. Pipes
131130 Providing and fixing G.I. pipes complete with G.I. fittings
and clamps, including cutting and making good the walls
etc. Internal work – Exposed on wall
131131 Providing and fixing G.I. pipes complete with G.I etc., - 15 1 metre 124.61
mm dia. nominal bore
131132 Providing and fixing G.I. pipes complete with G.I – 1 metre 152.67
Exposed on wall etc., - 20 mm dia. nominal bore
131133 Providing and fixing G.I. pipes complete with G.I Exposed 1 metre 207.78
on wall etc., - 25 mm dia. nominal bore
131134 Providing and fixing G.I. pipes complete with G.I – 1 metre 254.85
Exposed on wall etc., - 32 mm dia. nominal bore
131135 Providing and fixing G.I. pipes complete with G.I Exposed 1 metre 300.34
on wall etc., - 40 mm dia. nominal bore
131136 Providing and fixing G.I. pipes complete with G.I – 1 metre 382.63
Exposed on wall etc., - 50 mm dia. nominal bore
131141 Providing and fixing medium grade G.I. Concealed pipe 1 metre 172.64
etc., - 15 mm dia. nominal bore
131142 Providing and fixing medium grade G.I. Concealed pipe 1 metre 196.68
etc., - 20 mm dia. nominal bore
131143 Providing and fixing medium grade G.I. etc., - Concealed 1 metre 247.44
pipe 25 mm dia. nominal bore
131144 Providing and fixing medium grade G.I. Concealed pipe 1 metre 287.51
etc., - 32 mm dia. nominal bore
131150 Providing and fixing medium grade G.I. pipes complete 1
with G.I. fittings including trenching and refilling etc.
External Work
131151 Providing and fixing medium grade G.I. etc., - 15 mm dia. 1 metre 118.10
nominal bore
131152 Providing and fixing medium grade G.I. including 1 metre 142.14
trenching and refilling etc., - 20 mm dia. nominal bore
131153 Providing and fixing medium grade G.I. including 1 metre 196.18
trenching and refilling etc., - 25 mm dia. nominal bore
131154 Providing and fixing medium grade G.I. including 1 metre 236.26
trenching and refilling etc., - 32 mm dia. nominal bore
131155 Providing and fixing medium grade G.I. including 1 metre 268.86
trenching and refilling etc., - 40 mm dia. nominal bore
131156 Providing and fixing medium grade G.I. etc., - 50 mm dia. 1 metre 335.65
nominal bore
131157 Providing and fixing medium grade G.I. including 1 metre 432.75
trenching and refilling etc., - 65 mm dia. nominal bore
131158 Providing and fixing medium grade G.I. including 1 metre 550.29
trenching and refilling etc., - 80 mm dia. nominal bore
131159 Providing and fixing medium grade G.I. including 1 metre 758.26
trenching and refilling etc., - 100 mm dia. nominal bore
131161 Making connection of medium grade G.I. distributio etc., - 1 Each 231.04
25 to 40 mm nominal bore
131162 Making connection of medium grade G.I. distributio etc., - 1 Each 520.14
50 to 80 mm nominal bore
131163 Making connection of medium grade G.I. distributio etc., - 1 Each 978.24
100 mm to 150 mm dia.
131170 Fixing water meter and stop cock in G.I. pipe line 1 Each 179.35
including cutting and threading the pipe and making long
screws etc. complete (cost of water meter and stop cock
to be paid separately)
131180 Providing and fixing PP-R Gate Valve fusion welded, 1
having thermal stability for hot & cold water supply and
testing of joints complete as per direction of engineer in
charge
131181 Providing and fixing PP-R Gate Valve fusion welde etc., - 1 Each 537.39
25 mm Gate Valve
131182 Providing and fixing PP-R Gate Valve fusion welde etc., - 1 Each 618.70
32 mm Gate Valve
131183 Providing and fixing PP-R Gate Valve fusion welde etc., - 1 Each 760.02
40 mm Gate Valve
131184 Providing and fixing PP-R Gate Valve fusion welde etc., - 1 Each 1104.98
50 mm Gate Valve
131185 Providing and fixing PP-R Gate Valve fusion welde etc., - 1 Each 1472.99
63 mm Gate Valve
131190 Providing and fixing PP-R Brass Ball Valve fusion welded, 1
having thermal stability for hot & cold water supply and
testing of joints complete as per direction of engineer in
charge
131191 Providing and fixing PP-R Brass Ball Valve etc., - 20mm 1 Each 437.39
Ball Valve
131192 Providing and fixing PP-R Brass Ball Valve etc., - 25mm 1 Each 569.90
Ball Valve
131193 Providing and fixing PP-R Brass Ball Valve etc., - 32mm 1 Each 708.33
Ball Valve
131194 Providing and fixing PP-R Brass Ball Valve etc., - 40mm 1 Each 1440.46
Ball Valve
131201 Providing and fixing PP-R Male adopter conforming etc., - 1 Each 199.39
20mm adopter for PPR-GI connection
131202 Providing and fixing PP-R Male adopter conforming etc., - 1 Each 207.53
25mm adopter for PPR-GI connection
131203 Providing and fixing PP-R Male adopter conforming etc., - 1 Each 367.62
32mm adopter for PPR-GI connection
131204 Providing and fixing PP-R Male adopter conforming etc., - 1 Each 548.81
40mm adopter for PPR-GI connection
131205 Providing and fixing PP-R Male adopter conforming etc., - 1 Each 899.40
50mm adopter for PPR-GI connection
131206 Providing and fixing PP-R Male adopter conforming etc., - 1 Each 1067.81
63mm adopter for PPR-GI connection
131207 Providing and fixing PP-R Male adopter conforming etc., - 1 Each 1241.85
75mm adopter for PPR-GI connection
131208 Providing and fixing PP-R Male adopter conforming etc., - 1 Each 3355.78
90mm adopter for PPR-GI connection
132011 Providing and fixing brass bib cock of appr etc., - 15 mm 1 Each 119.70
nominal bore
132012 Providing and fixing brass bib cock of appr etc., - 20 mm 1 Each 232.52
nominal bore
132013 Providing and fixing brass bib cock of appr etc., - 25 mm 1 Each 243.45
nominal bore
132021 Providing and fixing brass stop cock of app etc., - 15 mm 1 Each 117.03
nominal bore
132022 Providing and fixing brass stop cock of app etc., - 20 mm 1 Each 272.13
nominal bore
132023 Providing and fixing brass stop cock of app etc., - 25 mm 1 Each 356.00
nominal bore
132024 Providing and fixing brass stop cock of app etc., - 32 mm 1 Each 393.17
nominal bore
132025 Providing and fixing brass stop cock of app etc., - 40 mm 1 Each 417.27
nominal bore
132026 Providing and fixing brass stop cock of app etc., - 50 mm 1 Each 425.40
nominal bore
132030 Providing and fixing gun metal gate valve with C.I. wheel
of approved quality (screwed end)
132031 Providing and fixing gun metal gate valve with C. etc., - 25 1 Each 339.74
mm nominal bore
132032 Providing and fixing gun metal gate valve with C. etc., - 32 1 Each 422.21
mm nominal bore
132033 Providing and fixing gun metal gate valve with C. etc., - 40 1 Each 527.98
mm nominal bore
132034 Providing and fixing gun metal gate valve with C. etc., - 50 1 Each 819.15
mm nominal bore
132035 Providing and fixing gun metal gate valve with C. etc., - 65 1 Each 1080.49
mm nominal bore
132036 Providing and fixing gun metal gate valve with C. etc., - 80 1 Each 1819.49
mm nominal bore
132037 Providing and fixing gun metal gate valve with C. etc., - 1 Each 1993.42
100 mm nominal bore
132041 Providing and fixing ball valve (brass) of approv etc., - 15 1 Each 287.85
mm nominal bore
132042 Providing and fixing ball valve (brass) of approv etc., - 20 1 Each 414.30
mm nominal bore
132043 Providing and fixing ball valve (brass) of approv etc., - 25 1 Each 513.48
mm nominal bore
132044 Providing and fixing ball valve (brass) of approv etc., - 32 1 Each 518.40
mm nominal bore
132045 Providing and fixing ball valve (brass) of approv etc., - 40 1 Each 585.67
mm nominal bore
132046 Providing and fixing ball valve (brass) of approv etc., - 50 1 Each 733.02
mm nominal bore
132051 Providing and fixing gun metal non-return valve etc., - 1 Each 286.56
Horizontal
132052 Providing and fixing gun metal non-return valve etc., - 1 Each 312.11
Vertical
132061 Providing and fixing gun metal non- return valve etc., - 1 Each 366.48
Horizontal
132062 Providing and fixing gun metal non- return valve etc., - 1 Each 459.23
Vertical
132071 Providing and fixing gun metal non- return valve etc., - 1 Each 488.96
Horizontal
132072 Providing and fixing gun metal non- return valve etc., - 1 Each 599.30
Vertical
132082 Providing and fixing gun metal non- return valve etc., - 1 Each 841.45
Vertical
132091 Providing and fixing gun metal non- return valve etc., - 1 Each 1275.15
Horizontal
132092 Providing and fixing gun metal non- return valve etc., - 1 Each 1461.40
Vertical
132101 Providing and fixing gun metal non- return valve etc., - 1 Each 1809.73
Horizontal
132102 Providing and fixing gun metal non- return valve etc., - 1 Each 2384.56
Vertical
132111 Providing and fixing gun metal non-return valve etc., - 1 Each 2576.21
Horizontal
132112 Providing and fixing gun metal non-return valve etc., - 1 Each 3515.02
Vertical
132120 Providing and fixing brass ferrule with C.I. mouth cover 1
including boring and tapping the main
132121 Providing and fixing brass ferrule with C.I. mout etc., - 15 1 Each 171.09
mm nominal bore
132122 Providing and fixing brass ferrule with C.I. mout etc., - 20 1 Each 230.20
mm nominal bore
132123 Providing and fixing brass ferrule with C.I. mout etc., - 25 1 Each 280.87
mm nominal bore
132124 Providing and fixing brass ferrule with C.I. mout etc., - 32 1 Each 280.50
mm nominal bore
132125 Providing and fixing brass ferrule with C.I. mout etc., - 40 1 Each 383.00
mm nominal bore
132126 Providing and fixing brass ferrule with C.I. mout etc., - 50 1 Each 484.64
mm nominal bore
132132 Providing and fixing unplasticised PVC connection etc., - 1 Each 44.28
20 mm nominal bore
132151 Providing and fixing CP Copper connection pipe wit etc., - 1 Each 118.76
15 mm nominal bore
132152 Providing and fixing CP Copper connection pipe wit etc., - 1 Each 190.49
20 mm nominal bore
132161 Providing and fixing CP Copper connection pipe wit etc., - 1 Each 156.19
15 mm nominal bore
132162 Providing and fixing CP Copper connection pipe wit etc., - 1 Each 242.11
20 mm nominal bore
132171 Providing and fixing C.P. brass shower rose with 1 etc., - 1 Each 51.87
100mm diameter
132172 Providing and fixing C.P. brass shower rose with 1 etc., - 1 Each 66.79
150 mm diameter
132180 Providing and fixing C.P. brass bib cock, 15mm nominal 1 Each 307.27
bore, of approved quality conforming to IS:8931
132190 Providing and fixing C.P. brass long nose bib cock, 15 mm 1 Each 365.47
nominal bore, of approved quality conforming to IS
standards and weighing not less than 810 gms
132200 Providing and fixing C.P. brass long body bib cock, 15 mm 1 Each 369.36
nominal bore, of approved quality conforming to IS
standards and weighing not less than 690 gms
132210 Providing and fixing C.P. brass stop cock, 15 mm nominal 1 Each 367.70
bore, (concealed) of standard design and of approved
make conforming to IS:8931
132220 Providing and fixing C.P. brass angle valve for basin mixer 1 Each 409.08
and geyser points of approved quality conforming to
IS:8931
132230 Supplying and fixing brass chromium plated (Two in one) 1 Each 951.47
type wall mixer having either fixed type over head shower
or telephonic shower as approved by Engineer In-charge
including all components like adjustable legs, wall flange,
rigid tube or flexible pipe etc. complete
132240 Supplying and fixing brass chromium plated (Three-in 1 Each 1238.27
one) type wall mixer having fixed type over head shower
and also having flexible type telephonic shower including
all components like adjustable legs, rigid tube, flexible
pipe etc. complete
132250 Supplying and fixing brass chromium plated (Two in one) 1 Each 1392.32
type wall mixer SINGLE LEVER HOT AND COLD WATER
MIXER having either fixed type over head shower or
telephonic shower as approved by Engineer In-charge
including all components like adjustable legs, wall flange,
rigid tube or flexible pipe etc. complete
133010 Laying in position centrifugally cast (spun) iron S&S 1 quintal 78.06
or flanged pipes (excluding cost of pipe)
133020 Laying in position S&S or flanged C.I. special such as 1 quintal 144.71
tees, bends, collars, tapers and caps etc.(excluding cost
of specials)
133031 Providing and laying S&S C.I. standard specials su etc., - 1 quintal 3634.71
Upto 300mm dia.
133032 Providing and laying S&S C.I. standard specials su etc., - 1 quintal 3518.56
Over 300mm dia.
133041 Providing and laying flanged C.I. standard specia etc., - 1 quintal 5028.51
Upto 300 mm dia
133042 Providing and laying flanged C.I. standard specia etc., - 1 quintal 5030.27
Over 300 mm dia
133051 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 779.35
80mm dia pipe.
133052 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 1129.52
100 mm dia. pipe
133053 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 1291.46
125 mm dia. pipe
133054 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 1994.97
150 mm dia. pipe
133055 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 2510.94
200 mm dia. pipe
133056 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 3077.00
250 mm dia. pipe
133057 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 3840.52
300 mm dia. pipe
133061 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 4894.61
350 mm dia. pipe
133062 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 5218.53
400 mm dia. pipe
133063 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 6038.18
450 mm dia. pipe
133064 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 8143.22
500 mm dia. pipe
133065 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 10966.88
600 mm dia. pipe
133071 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 852.52
80mm dia. pipe
133072 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 1258.16
100 mm dia. pipe
133073 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 1478.64
125 mm dia. pipe
133074 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 2240.92
150 mm dia. pipe
133075 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 2549.00
200 mm dia. pipe
133076 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 2978.55
250 mm dia. pipe
133077 Providing and laying S&S centrifugally cast (spu etc., - 1 metre 3733.57
300 mm dia. pipe
133081 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 1008.78
100mm dia Ductile Iron CLass K - 7 pipes
133082 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 1476.57
150mm dia Ductile Iron CLass K - 7 pipes
133083 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 1914.60
200mm dia Ductile Iron CLass K - 7 pipes
133084 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 2524.98
250mm dia Ductile Iron CLass K - 7 pipes
133085 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 3203.49
300mm dia Ductile Iron CLass K - 7 pipes
133086 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 3975.94
350mm dia Ductile Iron CLass K - 7 pipes
133087 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 4780.96
400mm dia Ductile Iron CLass K - 7 pipes
133088 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 5663.88
450mm dia Ductile Iron CLass K - 7 pipes
133089 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 6582.88
500mm dia Ductile Iron CLass K - 7 pipes
133091 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 8695.61
600mm dia Ductile Iron CLass K - 7 pipes
133092 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 11666.06
700mm dia Ductile Iron CLass K – 7 pipes
133093 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 13447.89
800mm dia Ductile Iron CLass K – 7 pipes
133094 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 15824.36
900mm dia Ductile Iron CLass K - 7 pipes
133095 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 18821.86
1000mm dia Ductile Iron CLass K - 7 pipes
133102 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 1720.87
150mm dia Ductile Iron CLass K - 9 pipes
133103 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 2257.32
200mm dia Ductile Iron CLass K - 9 pipes
133104 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 2967.33
250mm dia Ductile Iron CLass K - 9 pipes
133105 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 3750.08
300mm dia Ductile Iron CLass K - 9 pipes
133106 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 4648.72
350mm dia Ductile Iron CLass K - 9 pipes
133107 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 5583.00
400mm dia Ductile Iron CLass K – 9 pipes
133108 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 6678.05
450mm dia Ductile Iron CLass K – 9 pipes
133109 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 7704.25
500mm dia Ductile Iron CLass K – 9 pipes
133111 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 10193.03
600mm dia Ductile Iron CLass K - 9 pipes
133112 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 12985.81
700mm dia Ductile Iron CLass K - 9 pipes
133113 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 14659.43
750mm dia Ductile Iron CLass K - 9 pipes
133114 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 16536.60
800mm dia Ductile Iron CLass K - 9 pipes
133115 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 19810.47
900mm dia Ductile Iron CLass K - 9 pipes
133116 Providing and laying S&S Centrifugally Cast (Spun etc., - 1 metre 23332.54
1000mm dia Ductile Iron CLass K - 9 pipes
133121 Providing and laying Double etc., - 100mm dia Ductile Iron 1 metre 1422.62
Double Flanged
133122 Providing and laying Double etc., - 150mm dia Ductile Iron 1 metre 2095.17
Double Flanged
133123 Providing and laying Double etc., - 200mm dia Ductile Iron 1 metre 2779.31
Double Flanged
133124 Providing and laying Double etc., - 250mm dia Ductile Iron 1 metre 3886.85
Double Flanged
133125 Providing and laying Double etc., - 300mm dia Ductile Iron 1 metre 4846.81
Double Flanged
133126 Providing and laying Double etc., - 350mm dia Ductile Iron 1 metre 5564.08
Double Flanged
133127 Providing and laying Double etc., - 400mm dia Ductile Iron 1 metre 6639.32
Double Flanged
133128 Providing and laying Double etc., - 450mm dia Ductile Iron 1 metre 7388.09
Double Flanged
133129 Providing and laying Double etc., - 500mm dia Ductile Iron 1 metre 9167.01
Double Flanged
133131 Providing and laying Double etc., - 600mm dia Ductile Iron 1 metre 12568.74
Double Flanged
133132 Providing and laying Double etc., - 700mm dia Ductile Iron 1 metre 16758.47
Double Flanged
133141 Providing lead caulked joints to spun iron or C.I. etc., - 1 Each 112.97
80mmdia pipe
133142 Providing lead caulked joints to spun iron or C.I. etc., - 1 Each 119.35
100 mm diameter pipe
133143 Providing lead caulked joints to spun iron or C.I. etc., - 1 Each 175.30
125 mm dia. pipe
133144 Providing lead caulked joints to spun iron or C.I. etc., - 1 Each 178.84
150 mm dia. pipe
133145 Providing lead caulked joints to spun iron or C.I. etc., - 1 Each 236.88
200 mm dia. pipe
133146 Providing lead caulked joints to spun iron or C.I. etc., - 1 Each 298.19
250 mm dia. pipe
133147 Providing lead caulked joints to spun iron or C.I. etc., - 1 Each 359.86
300 mm dia. pipe
133148 Providing lead caulked joints to spun iron or C.I. etc., - 1 Each 369.73
350 mm dia. pipe
133149 Providing lead caulked joints to spun iron or C.I. etc., - 1 Each 480.92
400 mm dia. pipe
133151 Providing lead caulked joints to spun iron or C.I. etc., - 1 Each 538.83
450 mm dia. pipe
133152 Providing lead caulked joints to spun iron or C.I. etc., - 1 Each 570.34
500 mm dia. pipe
133153 Providing lead caulked joints to spun iron or C.I. etc., - 1 Each 767.50
600 mm dia. pipe
133171 Providing flanged joints to double flanged C.I./ etc., - 80 1 Each 97.92
mm dia. pipe
133172 Providing flanged joints to double flanged C.I./ etc., - 100 1 Each 165.93
mm dia. pipe
133173 Providing flanged joints to double flanged C.I./ etc., - 125 1 Each 169.41
mm dia. pipe
133174 Providing flanged joints to double flanged C.I./ etc., - 150 1 Each 205.66
mm dia. pipe
133175 Providing flanged joints to double flanged C.I./ etc., - 200 1 Each 211.47
mm dia. pipe
133176 Providing flanged joints to double flanged C.I./ etc., - 250 1 Each 306.16
mm dia. pipe
133177 Providing flanged joints to double flanged C.I./ etc., - 300 1 Each 314.29
mm dia. pipe
133178 Providing flanged joints to double flanged C.I./ etc., - 350 1 Each 412.34
mm dia. pipe
133179 Providing flanged joints to double flanged C.I./ etc., - 400 1 Each 708.84
mm dia. pipe
133181 Providing flanged joints to double flanged C.I./ etc., - 450 1 Each 881.15
mm dia. pipe
133182 Providing flanged joints to double flanged C.I./ etc., - 500 1 Each 916.30
mm dia. pipe
133183 Providing flanged joints to double flanged C.I./ etc., - 600 1 Each 1439.62
mm dia. pipe
133190 Providing and fixing C.I. sluice valves (with cap) complete 1
with bolts, nuts, rubber insertions etc. 80 mm dia. (the tail
pieces if required will be paid separately)
133191 Providing and fixing C.I. sluice valves (wit etc., - Class I 1 Each 2561.10
133192 Providing and fixing C.I. sluice valves (wit etc., - Class II 1 Each 3509.54
133200 Providing and fixing C.I. sluice valves (with cap) complete 1
with bolts, nuts, rubber insertions etc. 100 mm dia (the tail
pieces if required will be paid separately)
133201 Providing and fixing C.I. sluice valves (wit etc., - Class I 1 Each 3462.42
133202 Providing and fixing C.I. sluice valves (wit etc., - Class II 1 Each 4562.96
133210 Providing and fixing C.I. sluice valves (with cap) complete 1
with bolts, nuts, rubber insertions etc. 125 mm dia (the tail
pieces if required will be paid separately)
133211 Providing and fixing C.I. sluice valves (wit etc., - Class I 1 Each 3703.45
133212 Providing and fixing C.I. sluice valves (wit etc., - Class II 1 Each 5845.75
133220 Providing and fixing C.I. sluice valves (with cap) complete 1
with bolts, nuts, rubber insertions etc. 150 mm dia (the tail
pieces if required will be paid separately)
133221 Providing and fixing C.I. sluice valves (wit etc., - Class I 1 Each 4418.19
133222 Providing and fixing C.I. sluice valves (wit etc., - Class II 1 Each 7007.32
133230 Providing and fixing C.I. sluice valves (with cap) complete 1
with bolts, nuts, rubber insertions etc. 200 mm dia (the tail
pieces if required will be paid separately).
133231 Providing and fixing C.I. sluice valves (wit etc., - Class I 1 Each 8101.78
133232 Providing and fixing C.I. sluice valves (wit etc., - Class II 1 Each 12742.51
133240 Providing and fixing C.I. sluice valves (with cap) complete 1
with bolts, nuts, rubber insertions etc. 250 mm dia (the tail
pieces if required will be paid separately)
133241 Providing and fixing C.I. sluice valves (wit etc., - Class I 1 Each 12046.89
133242 Providing and fixing C.I. sluice valves (wit etc., - Class II 1 Each 18728.61
133250 Providing and fixing C.I. sluice valves (with cap) complete 1
with bolts, nuts, rubber insertions etc. 300 mm dia (the tail
pieces if required will be paid separately)
133251 Providing and fixing C.I. sluice valves (wit etc., - Class I 1 Each 14608.93
133252 Providing and fixing C.I. sluice valves (wit etc., - Class II 1 Each 23199.28
133261 Providing and fixing C.I. double acting air valve etc., - 50 1 Each 2050.98
mm dia
133262 Providing and fixing C.I. double acting air valve etc., - 80 1 Each 2225.20
mm dia
133263 Providing and fixing C.I. double acting air valve etc., - 100 1 Each 3833.71
mm dia
133270 Providing and fixing enclosed type water meter (bulk type) 1
conforming to IS : 2373 and tested by Municipal Board
complete with bolts, nuts, rubber insertions etc. (The tail
pieces if required will be paid separately)
133271 Providing and fixing enclosed type water meter (bu etc., - 1 Each 3326.08
80 mm dia nominal bore
133272 Providing and fixing enclosed type water meter (bu etc., - 1 Each 4306.84
100 mm dia nominal bore
133273 Providing and fixing enclosed type water meter (bu etc., - 1 Each 6869.26
150 mm dia nominal bore
133274 Providing and fixing enclosed type water meter (bu etc., - 1 Each 8567.37
200 mm dia nominal bore
133280 Supplying, installing & fixing in position including field 1
testing, domestic type water meter, horizontal inferential,
single jet or multi jet, dry dial suitable upto 500C
temperature, duly sealed against tampering, complete
with couplings on both ends, manufactured by approved
firms, confirming to Class B as per IS 779 with
manufacturer’s test certificate, guarantee certificate
including cost of material & labour. The rate also includes
obtaining Municipal approval as per local Municipal rules,
if any
133281 Supplying, installing & fixing in position includi etc., - 15 1 Each 1230.13
mm bore
133282 Supplying, installing & fixing in position includi etc., - 20 1 Each 1853.14
mm bore
133283 Supplying, installing & fixing in position includi etc., - 25 1 Each 2243.21
mm bore
133284 Supplying, installing & fixing in position includi etc., - 40 1 Each 3447.49
mm bore
133290 Providing and fixing C.I. dirt box strainer for bulk type 1
water meter with nuts, bolts, rubber insertions etc.
complete conforming to IS : 2373
133291 Providing and fixing C.I. dirt box strainer for b etc., - 80 1 Each 3703.56
mm dia
133292 Providing and fixing C.I. dirt box strainer for b etc., - 100 1 Each 5570.22
mm dia
133293 Providing and fixing C.I. dirt box strainer for b etc., - 150 1 Each 5875.01
mm dia
133294 Providing and fixing C.I. dirt box strainer for b etc., - 200 1 Each 9315.38
mm dia
133301 Providing and laying S&S C.I. Standard specials su etc., - 1 Quintal 5045.93
Upto 300 mm dia
133302 Providing and laying S&S C.I. Standard specials su etc., - 1 Quintal 5681.27
Above 300 mm dia
133311 Providing and laying S&S C.I. Standard spec etc., - Upto 1 Quintal 5957.71
300mm dia
133312 Providing and laying S&S C.I. Standard spec etc., - Above 1 Quintal 5957.71
300mm dia
133320 Providing and laying D.I. Specials of Class K - 12 suitable 1
for push-on jointing as per IS : 9523
133321 Providing and laying D.I. Specials of Class K - 1 etc., - 1 Quintal 5957.71
Upto 600mm dia
133322 Providing and laying D.I. Specials of Class K - 1 etc., - 1 Quintal 5957.71
Above 600mm dia
133331 Providing and laying D.I. Specials of Class K - 1 etc., - 1 Quintal 5957.71
Upto 600mm dia
133332 Providing and laying D.I. Specials of Class K - 1 etc., - 1 Quintal 5957.71
Above 600mm dia
133361 Providing and laying Double Flanged etc., - 100mm dia 1 metre 1416.23
C.I. Double Flanged Pipe
133362 Providing and laying Double Flanged etc., - 150mm dia 1 metre 2214.57
C.I. Double Flanged Pipe
133363 Providing and laying Double Flanged etc., - 200mm dia 1 metre 3363.59
C.I. Double Flanged Pipe
133364 Providing and laying Double Flanged etc., - 250mm dia 1 metre 4357.80
C.I. Double Flanged Pipe
133365 Providing and laying Double Flanged etc., - 300mm dia 1 metre 5597.81
C.I. Double Flanged Pipe
133366 Providing and laying Double Flanged etc., - 350mm dia 1 metre 6430.09
C.I. Double Flanged Pipe
133367 Providing and laying Double Flanged etc., - 400mm dia 1 metre 8304.35
C.I. Double Flanged Pipe
133368 Providing and laying Double Flanged etc., - 450mm dia 1 metre 10750.16
C.I. Double Flanged Pipe
133371 Providing and laying Double Flanged etc., - 500mm dia 1 metre 11813.30
C.I. Double Flanged Pipe
133372 Providing and laying Double Flanged etc., - 600mm dia 1 metre 17691.22
C.I. Double Flanged Pipe
133401 Extra for every operation on item no. 1333 etc., - 80mm 100 m 150.96
diameter C.I. pipe
133402 Extra for every operation on item no. 1333 etc., - 100mm 100 m 185.21
diameter C.I. pipe
133403 Extra for every operation on item no. 1333 etc., - 125mm 100 m 228.05
diameter C.I. pipe
133404 Extra for every operation on item no. 1333 etc., - 150mm 100 m 268.90
diameter C.I. pipe
133405 Extra for every operation on item no. 1333 etc., - 200mm 100 m 412.79
diameter C.I. pipe
133406 Extra for every operation on item no. 1333 etc., - 250mm 100 m 484.24
diameter C.I. pipe
133407 Extra for every operation on item no. 1333 etc., - 300mm 100 m 554.36
diameter C.I. pipe
133408 Extra for every operation on item no. 1333 etc., - 350mm 100 m 660.16
diameter C.I. pipe
133409 Extra for every operation on item no. 1333 etc., - 400mm 100 m 769.35
diameter C.I. pipe
133411 Extra for every operation over item no. 133 etc., - 450mm 100 m 884.95
diameter C.I. pipe
133412 Extra for every operation over item no. 133 etc., - 500mm 100 m 951.64
diameter C.I. pipe
133413 Extra for every operation over item no. 133 etc., - 600mm 100 m 1250.59
diameter C.I. pipe
133421 Dismantling old CI/GI/WI/DI pipes inc etc., - 80mm 1 metre 82.08
diameter C.I. pipe
133422 Dismantling old CI/GI/WI/DI pipes inc etc., - 100mm 1 metre 87.70
diameter C.I. pipe
133423 Dismantling old CI/GI/WI/DI pipes inc etc., - 125mm 1 metre 93.01
diameter C.I. pipe
133424 Dismantling old CI/GI/WI/DI pipes inc etc., - 150mm 1 metre 97.27
diameter C.I. pipe
133425 Dismantling old CI/GI/WI/DI pipes inc etc., - 200mm 1 metre 108.28
diameter C.I. pipe
133426 Dismantling old CI/GI/WI/DI pipes inc etc., - 250mm 1 metre 119.40
diameter C.I. pipe
133427 Dismantling old CI/GI/WI/DI pipes inc etc., - 300mm 1 metre 129.17
diameter C.I. pipe
133428 Dismantling old CI/GI/WI/DI pipes inc etc., - 350mm 1 metre 138.36
diameter C.I. pipe
133429 Dismantling old CI/GI/WI/DI pipes inc etc., - 400mm 1 metre 147.34
diameter C.I. pipe
133431 Dismantling old CI/GI/WI/DI pipes inc etc., - 450mm 1 metre 174.13
diameter C.I. pipe
133432 Dismantling old CI/GI/WI/DI pipes inc etc., - 500mm 1 metre 185.24
diameter C.I. pipe
133433 Dismantling old CI/GI/WI/DI pipes inc etc., - 600mm 1 metre 206.20
diameter C.I. pipe
133440 Labour for cutting C.I. pipe with steel saw for each cut : up 1
to 400 mm dia.
133441 Labour for cutting C.I. pipe with steel saw for e etc., - 1 Each 32.55
80mm diameter C.I. pipe
133442 Labour for cutting C.I. pipe with steel saw for e etc., - 1 Each 43.75
100mm diameter C.I. pipe
133443 Labour for cutting C.I. pipe with steel saw for e etc., - 1 Each 60.93
125mm diameter C.I. pipe
133444 Labour for cutting C.I. pipe with steel saw for e etc., - 1 Each 81.22
150mm diameter C.I. pipe
133445 Labour for cutting C.I. pipe with steel saw for e etc., - 1 Each 109.75
200mm diameter C.I. pipe
133446 Labour for cutting C.I. pipe with steel saw for e etc., - 1 Each 136.17
250mm diameter C.I. pipe
133447 Labour for cutting C.I. pipe with steel saw for e etc., - 1 Each 163.64
300mm diameter C.I. pipe
133448 Labour for cutting C.I. pipe with steel saw for e etc., - 1 Each 190.06
350mm diameter C.I. pipe
133449 Labour for cutting C.I. pipe with steel saw for e etc., - 1 Each 217.39
400mm diameter C.I. pipe
133450 Labour for cutting C.I. pipe with steel saw for each cut 1
above 400 mm dia.
133451 Labour for cutting C.I. pipe with steel saw for e etc., - 1 Each 243.96
450mm diameter C.I. pipe
133452 Labour for cutting C.I. pipe with steel saw for e etc., - 1 Each 272.34
500mm diameter C.I. pipe
133453 Labour for cutting C.I. pipe with steel saw for e etc., - 1 Each 323.06
600mm diameter C.I. pipe
133460 Disconnecting and taking out sluice valves, water 1 Each 68.85
hydrants etc in CI pipes
133470 Cutting of GI, WI, in true edge with steel saw;- (if not 1
already covered in the item), for each cut
133471 Cutting of GI, WI, in true edge with steel saw;- ( etc., - 1 Each 17.47
upto 40 mm dia.
133472 Cutting of GI, WI, in true edge with steel saw;- ( etc., - 1 Each 33.70
above 40 mm and upto 80 mm dia.
133473 Cutting of GI, WI, in true edge with steel saw;- ( etc., - 1 Each 54.09
above 80 mm and upto 125 mm dia.
133474 Cutting of GI, WI, in true edge with steel saw;- ( etc., - 1 Each 89.93
above 125 mm and upto 200 mm dia.
133475 Cutting of GI, WI, in true edge with steel saw;- ( etc., - 1 Each 109.58
above 200 mm and upto 250 mm dia.
133476 Cutting of GI, WI, in true edge with steel saw;- ( etc., - 1 Each 137.26
above 250 mm and upto 300 mm dia.
P.T.M.T. FITTINGS 1
134011 Providing and fixing PTMT bib cock of appro etc., - 15mm 1 Each 141.77
nominal bore, 86mm long. Weighing not less than 88 gms
134012 Providing and fixing PTMT bib cock of appro etc., - 15mm 1 Each 178.94
nominal bore, 90mm long. Weighing not less than 93 gms
134013 Providing and fixing PTMT bib cock of appro etc., - 15mm 1 Each 311.35
nominal bore, 122mm long. Weighing not less than 99
gms
134014 Providing and fixing PTMT bib cock of appro etc., - 15mm 1 Each 223.08
nominal bore, 165mm long. Weighing not less than 110
gms
134021 Providing and fixing PTMT stop cock of appr etc., - 15mm 1 Each 142.93
nominal bore, 86mm long. Weighing not less than 88 gms
134022 Providing and fixing PTMT stop cock of appr etc., - 20mm 1 Each 256.76
nominal bore, 89mm long. Weighing not less than 88 gms
134023 Providing and fixing PTMT stop cock of appr etc., - 1 Each 176.62
Concealed stop cock, 15mm nominal bore, 108mm long.
Weighing not less than 108gms
134031 Providing and fixing PTMT pillar cock of app etc., - 15mm 1 Each 220.09
nominal bore, 107mm long. Weighing not less than 110
gms
134032 Providing and fixing PTMT pillar cock of app etc., - 15mm 1 Each 313.01
nominal size, 125 mm long foam flow. Weighing not less
than 120 gms
134041 Providing and fixing PTMT push cock of appr etc., - 15mm 1 Each 134.80
nominal bore, 98mm long. Weighing not less than 75 gms
134042 Providing and fixing PTMT push cock of appr etc., - 15mm 1 Each 113.90
nominal size, 80 mm long. Weighing not less than 46 gms
134051 Providing and fixing PTMT grating of approved qual etc., - 1 Each 46.65
Circular type 100 mm nominal dia
134052 Providing and fixing PTMT grating of approved qual etc., - 1 Each 57.10
Circular type 125 mm nominal dia with 25mm waste hole
134053 Providing and fixing PTMT grating of approved qual etc., - 1 Each 129.11
Rectangular type with openable circular lid. 150mm
nominal size square, 100mm diameter of the inner hinged
round grating
134061 Providing and fixing PTMT Ball cock of appr etc., - 15mm 1 Each 193.48
nominal bore, 105mm long. Weighing not less than 138
gms
134062 Providing and fixing PTMT Ball cock of appr etc., - 20mm 1 Each 294.92
nominal bore, 120mm long. Weighing not less than 198
gms
134063 Providing and fixing PTMT Ball cock of appr etc., - 25mm 1 Each 606.58
nominal bore, 152mm long. Weighing not less than 440
gms
134064 Providing and fixing PTMT Ball cock of appr etc., - 40mm 1 Each 1059.57
nominal bore, 206mm long. Weighing not less than 690
gms
134065 Providing and fixing PTMT Ball cock of appr etc., - 50mm 1 Each 1651.93
nominal bore, 242mm long. Weighing not less than 1240
gms
134070 Providing and fixing PTMT angle stop cock 15mm nominal 1 Each 204.49
bore. Weighing not less than 85 gms
134080 Providing and fixing PTMT swiveling shower, 15mm 1 Each 132.13
nominal bore. Weighing not less than 40 gms
134090 Providing and fixing PTMT soap Dish Holder having 1 Each 172.78
length of 138mm, breadth 102mm, height of 75mm with
concealed fitting arrangements. Weighing not less than
106 gms
134101 Providing and fixing unplasticised P.V.C. connect with 1 Each 56.01
PTMT nuts etc., - 15 mm nominal bore with 30cm length
134102 Providing and fixing unplasticised P.V.C. connect with 1 Each 65.65
PTMT nuts etc., - 15 mm nominal bore. with 45cm length
134110 Providing and fixing PTMT extension nipple for water tank 1
pipe, fittings of approved quality and colour
134111 Providing and fixing PTMT extension nipple for wat etc., - 1 Each 21.08
15 mm nominal bore. Weighing not less than 32gms
134112 Providing and fixing PTMT extension nipple for wat etc., - 1 Each 30.99
20 mm nominal bore. Weighing not les than 40gms
134113 Providing and fixing PTMT extension nipple for wat etc., - 1 Each 48.06
25 mm nominal bore. Weighing not less than 62gms
HYDRANTS 1
135010 Providing and fixing cast iron water hydrant one way for 1 Each 1188.58
carriage washing lines including cost of jointing material
complete as per approved drawing {Drg No.
8373/M.(NR) used for analysis}
135020 Providing and fixing cast iron water hydrant two way for 1 Each 1421.23
carriage washing lines including cost of jointing material
complete as per approved drawing {Engg drawing no 250.
(NR), used for analysis}
135030 Providing and fixing cast iron spindle fire hydrant 65 mm 1 Each 1448.41
outlet, complete including cost of jointing material
complete as (bolts, nuts and rubber insertions etc)
135040 Supplying, fitting & fixing in position C.I. Fire Hydrant 1 Each 5522.26
stand post type ISI marked (IS:908) containing stand post
column having single spout (outlet), duck foot bend, inlet
80 mm dia. with one sluice valve, surface box etc.
complete in all respect
MANHOLES 1
136010 Constructing masonry Chamber 30x30x50 cm, inside with 1 Each 529.41
7.5 class designation brick work with FPS Bricks in
cement mortar 1:4 (1 cement :4 coarse sand) for stop
cock, with C. I. surface box 100x100 x75 mm (inside) with
hinged cover fixed in cement concrete slab 1:2:4 mix (1
cement :2 coarse sand : 4 graded stone aggregate 20 mm
nominal size ) necessary excavation foundation concrete
1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate
40mm nominal size ) and inside plastering with cement
mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished
with a floating coat of neat cement complete as per
standard design
136020 Constructing masonry Chamber 60x60x75 cm, inside with 1 Each 2720.85
7.5 class designation brick work with FPS Bricks in
cement mortar 1:4 (1 cement :4 coarse sand) for sluice
valve, with C.I. surface box 100mm. top diameter and 160
mm bottom diameter and 180 mm deep ( inside) with
chained lid and RCC top slab 1:2:4 mix (1 cement :2
coarse sand : 4 graded stone aggregate 20mm nominal
size ) necessary excavation foundation concrete 1:5:10 (1
cement :5 fine sand:10 graded stone aggregate 40 mm
nominal size
) and inside plastering with cement mortar 1:3 (1 cement :
3 coarse sand) 12 mm thick finished with a floating coat of
neat cement complete as per standard design
136050 Constructing masonry Chamber 60x60x75 cm, inside with 1 Each 2621.51
7.5 class designation brick work with FPS Bricks in
cement mortar 1:4 ( 1 cement :4 coarse sand) for fire
hydrants, with C.I. surface box 350x350 mm. top and 165
mm deep ( inside) with chained lid and RCC top slab 1:2:4
mix ( 1 cement :2 coarse sand : 4 graded stone aggregate
20 mm nominal size ) necessary excavation foundation
concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone
aggregate 40 mm nominal size ) and inside plastering with
cement mortar 1:3 ( 1 cement :3 coarse sand) 12 mm
thick finished with a floating coat of neat cement complete
as per standard design.
136060 Constructing masonry Chamber 60x45x50 cm, inside with 1 Each 2189.59
7.5 class designation brick work with FPS Bricks in
cement mortar 1:4 (1 cement :4 coarse sand) for water
meter complete with C.I. double flap surface box
400x200x200mm. (inside) with locking arrangement and
RCC top slab 1:2:4 mix (1 cement
:2 coarse sand : 4 graded stone aggregate 20mm nominal
size) necessary excavation foundation concrete 1:5:10 (1
cement :5 fine sand:10 graded stone aggregate 40 mm
nominal size) and inside plastering with cement mortar 1:3
(1 cement :3 coarse sand) 12 mm thick finished with a
floating coat of neat cement complete as per standard
design.
136071 Providing and filling sand of grading zone etc., - 15 mm 1 metre 41.91
dia. Pipe
136072 Providing and filling sand of grading zone etc., - 20 mm 1 metre 42.48
dia. Pipe
136073 Providing and filling sand of grading zone etc., - 25 mm 1 metre 43.61
dia. Pipe
136074 Providing and filling sand of grading zone etc., - 32 mm 1 metre 44.75
dia. Pipe
136075 Providing and filling sand of grading zone etc., - 40 mm 1 metre 45.31
dia. Pipe
136076 Providing and filling sand of grading zone etc., - 50 mm 1 metre 47.01
dia. Pipe
136077 Providing and filling sand of grading zone etc., - 65 mm 1 metre 74.20
dia. Pipe
136078 Providing and filling sand of grading zone etc., - 80 mm 1 metre 76.46
dia. Pipe
136079 Providing and filling sand of grading zone etc., - 100 mm 1 metre 80.99
dia. Pipe
136081 Providing and filling sand of grading zone etc., - 150 mm 1 metre 120.64
dia pipe
136082 Providing and filling sand of grading zone etc., - 200 mm 1 metre 129.70
dia pipe
136083 Providing and filling sand of grading zone etc., - 250 mm 1 metre 135.37
dia pipe
136084 Providing and filling sand of grading zone etc., - 300 mm 1 metre 139.90
dia pipe
136085 Providing and filling sand of grading zone etc., - 450 mm 1 metre 186.34
dia pipe
136086 Providing and filling sand of grading zone etc., - 600 mm 1 metre 274.70
dia pipe
136091 Boring with 100mm diameter casing pipe for hand p etc., - 1 metre 198.01
Upto 6 metres depth
136092 Boring with 100mm diameter casing pipe for hand p etc., - 1 metre 234.77
Beyond 6 m and upto 12 m depth
136093 Boring with 100mm diameter casing pipe for hand p etc., - 1 metre 273.08
Beyond 12 m and upto 18 m depth
136094 Boring with 100mm diameter casing pipe for hand p etc., - 1 metre 389.76
Beyond 18 m and upto 30 m depth
136100 Providing and placing in position filters of 40 mm diameter 1 metre 511.76
G.I. pipe with brass strainer of approved quality
136110 Providing and fixing to filter and lowering to proper levels 1 metre 229.16
40 mm G.I. pipe for tube well including cleaning and
priming the tube well
136120 Providing and placing in position hand pump of approved 1 Each 748.71
quality for 40 mm diameter G.I. pipe complete with all
accessories
136131 Providing and fixing G.I. Union in G.I. pipe inclu etc., - 1 Each 104.02
15mm nominal bore
136132 Providing and fixing G.I. Union in G.I. pipe inclu etc., - 1 Each 128.88
20mm nominal bore
136133 Providing and fixing G.I. Union in G.I. pipe inclu etc., - 1 Each 157.22
25mm nominal bore
136134 Providing and fixing G.I. Union in G.I. pipe inclu etc., - 1 Each 203.10
32mm nominal bore
136135 Providing and fixing G.I. Union in G.I. pipe inclu etc., - 1 Each 235.50
40mm nominal bore
136136 Providing and fixing G.I. Union in G.I. pipe inclu etc., - 1 Each 350.11
50mm nominal bore
136137 Providing and fixing G.I. Union in G.I. pipe inclu etc., - 1 Each 496.34
65mm nominal bore
136138 Providing and fixing G.I. Union in G.I. pipe inclu etc., - 80 1 Each 567.77
mm nominal bore
136140 Providing and fixing G.I. Union in existing G.I. pipe line, 1
cutting and threading the pipe and making long screws
including excavation, refilling the earth or cutting of wall
and making good the same complete wherever required
136141 Providing and fixing G.I. Union in existing G.I. etc., - 15 1 Each 215.61
mm nominal bore
136142 Providing and fixing G.I. Union in existing G.I. etc., - 20 1 Each 240.47
mm nominal bore
136143 Providing and fixing G.I. Union in existing G.I. etc., - 25 1 Each 268.81
mm nominal bore
136144 Providing and fixing G.I. Union in existing G.I. etc., - 32 1 Each 314.69
mm nominal bore
136145 Providing and fixing G.I. Union in existing G.I. etc., - 40 1 Each 347.09
mm nominal bore
136146 Providing and fixing G.I. Union in existing G.I. etc., - 50 1 Each 502.27
mm nominal bore
136147 Providing and fixing G.I. Union in existing G.I. etc., - 65 1 Each 648.51
mm nominal bore
136148 Providing and fixing G.I. Union in existing G.I. etc., - 80 1 Each 719.94
mm nominal bore
136150 Providing and placing on terrace/staging (at all heights) 1 litre 6.43
polyethylene water storage tank ISI : 12701 marked with
cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but
without fittings and the base support for tank
136170 Cutting holes up to 15x15cm in RCC floors and roofs for 1 Each 107.20
passing drain pipe etc. and repairing the hole after
insertion of drain pipe etc. with cement concrete
1:2:4 (1 cement :2 coarse sand: 4 graded stone aggregate
20mm nominal size) including finishing complete so as to
make it leak proof
MISCELLANEOUS 1
137010 Supplying, fabricating and fixing M.S. flat angle iron pipe 1 Kg 105.87
clamps, stays, etc. including drilling holes, welding (if any)
including nuts and bolts etc. including all lifts
137021 Supplying and jointing cast iron concussion etc., - 80 mm 1 Each 2440.89
bore
137022 Supplying and jointing cast iron concussion etc., - 100 mm 1 Each 3091.75
bore
137032 Supplying and jointing expansion joint with cast i etc., - 1 Each 814.63
100 mm bore
137033 Supplying and jointing expansion joint with cast i etc., - 1 Each 1168.54
150 mm bore
137034 Supplying and jointing expansion joint with cast i etc., - 1 Each 1465.89
200 mm bore
137035 Supplying and jointing expansion joint with cast i etc., - 1 Each 1935.75
250 mm bore
137036 Supplying and jointing expansion joint with cast i etc., - 1 Each 2356.21
300 mm bore
137037 Supplying and jointing expansion joint with cast i etc., - 1 Each 2942.67
350 mm bore
137041 Supplying and jointing-in-position cast iron flan etc., - 80 1 Each 764.62
mm size
137042 Supplying and jointing-in-position cast iron flan etc., - 100 1 Each 1195.02
mm size
137043 Supplying and jointing-in-position cast iron flan etc., - 150 1 Each 1480.99
mm size
137051 Supplying and jointing in position cast iron flan etc., - 150 1 Each 1480.99
mm size
137052 Supplying and jointing in position cast iron flan etc., - 200 1 Each 1986.24
mm size
137061 Supplying and fixing on water tanks etc. sl etc., - Up to 1 Each 975.66
1.25 m long
137062 Supplying and fixing on water tanks etc. sl etc., - More 1 Each 1396.12
than 1.25 m long
137070 Extra for supplying and fixing hand wheel in place of 1
spindle cap. For Sluice valves. ( If not covered by rates of
original Item)
137071 Extra for supplying and fixing hand wheel in place etc., - 1 Each 255.53
For sluice valves from 50 mm upto 80 mm bore
137072 Extra for supplying and fixing hand wheel in place etc., - 1 Each 264.82
For sluice valves from 100 mm and 125 mm bore
137073 Extra for supplying and fixing hand wheel in place etc., - 1 Each 483.18
For sluice valves for 150 mm bore
137074 Extra for supplying and fixing hand wheel in place etc., - 1 Each 492.48
For sluice valves of 200 mm & 250 mm bore
137075 Extra for supplying and fixing hand wheel in place etc., - 1 Each 641.15
For sluice valves of 300 mm bore
137081 Supplying, fitting and fixing float valve of etc., - 15 mm dia 1 Each 69.69
pipe
137082 Supplying, fitting and fixing float valve of etc., - 20mm dia 1 Each 116.61
pipe
137083 Supplying, fitting and fixing float valve of etc., - 25mm dia 1 Each 158.54
pipe
137091 Supplying, fitting and fixing polythene ball only etc., - 15 1 Each 59.58
mm dia pipe
137092 Supplying, fitting and fixing polythene ball only etc., - 1 Each 77.82
20mm dia pipe
137093 Supplying, fitting and fixing polythene ball only etc., - 1 Each 95.82
25mm dia pipe
137102 Supplying, laying, jointing, fitting and fixi etc., - 200mmdia 1 metre 396.16
137103 Supplying, laying, jointing, fitting and fixi etc., - 250mm dia 1 metre 484.44
137104 Supplying, laying, jointing, fitting and fixi etc., - 300mm dia 1 metre 605.19
137105 Supplying, laying, jointing, fitting and fixi etc., - 400mm dia 1 metre 796.91
137106 Supplying, laying, jointing, fitting and fixi etc., - 450mm dia 1 metre 786.29
137107 Supplying, laying, jointing, fitting and fixi etc., - 500mm dia 1 metre 998.88
137110 Cleaning thoroughly inside/outside of old C.I. Pipes and 1 Sqm 24.56
specials, removing rust, incrustations etc. and dipping in
hot Angus Smith’s solution. All materials shall be as per
relevant I.S. Specifications
138011 Laying C.I. Pipes including i) Cutting pipe etc., - 400 mm 1 metre 414.22
dia
138012 Laying C.I. Pipes including i) Cutting pipe etc., - 350 mm 1 metre 359.89
dia
138013 Laying C.I. Pipes including i) Cutting pipe etc., - 300 mm 1 metre 326.85
dia
138014 Laying C.I. Pipes including i) Cutting pipe etc., - 250 mm 1 metre 287.18
dia
138015 Laying C.I. Pipes including i) Cutting pipe etc., - 200 mm 1 metre 247.30
dia
138016 Laying C.I. Pipes including i) Cutting pipe etc., - 150 mm 1 metre 209.50
dia
138017 Laying C.I. Pipes including i) Cutting pipe etc., - 125 mm 1 metre 186.41
dia
138018 Laying C.I. Pipes including i) Cutting pipe etc., - 100 mm 1 metre 161.53
dia
138019 Laying C.I. Pipes including i) Cutting pipe etc., - 80 mm 1 metre 138.94
dia
138041 Hoisting, fitting and fixing in position plastic m etc., - 200 1 Each 628.02
ltr capacity tank
138042 Hoisting, fitting and fixing in position plastic m etc., - 500 1 Each 703.87
ltr capacity tank
138043 Hoisting, fitting and fixing in position plastic m etc., - 1000 1 Each 1192.40
ltr capacity tank
138044 Hoisting, fitting and fixing in position plastic m etc., - 2000 1 Each 1479.77
ltr capacity tank
138045 Hoisting, fitting and fixing in position plastic m etc., - 2500 1 Each 1669.39
ltr Capacity tank
138046 Hoisting, fitting and fixing in position plastic m etc., - 5000 1 Each 2275.01
ltr Capacity tank
138047 Hoisting, fitting and fixing in position plastic m etc., - 1 Each 2931.34
10000 ltr Capacity tank
138050 Taking out existing OH G.I. Tank & depositing the same to 1
railway store with lead upto 100 m and all descent
138051 Taking out existing OH G.I. Tank & depositing th etc., - 1 Each 703.87
237.50-250 ltr capacity
138052 Taking out existing OH G.I. Tank & depositing th etc., - 1 Each 882.57
450-500 ltr capacity
138053 Taking out existing OH G.I. Tank & depositing th etc., - 1 Each 1192.40
910-1000 ltr capacity
138054 Taking out existing OH G.I. Tank & depositing th etc., - 1 Each 1744.79
1820 -2000 ltr capacity
138061 Taking out existing OH plastic moulded water stora etc., - 1 Each 590.09
200 ltrs capacity tank
138062 Taking out existing OH plastic moulded water stora etc., - 1 Each 665.94
500 ltrs capacity tank
138063 Taking out existing OH plastic moulded water stora etc., - 1 Each 1137.12
1000 ltrs capacity tank
138064 Taking out existing OH plastic moulded water stora etc., - 1 Each 1430.91
2000 ltrs capacity tank
138065 Taking out existing OH plastic moulded water stora etc., - 1 Each 1549.82
2500 ltrs capacity tank
138066 Taking out existing OH plastic moulded water stora etc., - 1 Each 1991.49
5000 ltrs capacity tank
138067 Taking out existing OH plastic moulded water stora etc., - 1 Each 2116.86
7500 ltrs capacity tank
138068 Taking out existing OH plastic moulded water stora etc., - 1 Each 2760.62
10000 ltrs capacity tank
138070 Taking out old C.I./G.I. Pipes including specials with lead 1
upto 100m and stacking at nominated place including all
excavation, refilling and making good the surface, as
required
138071 Taking out old C.I./G.I. Pipes including specials etc., - 1 metre 370.60
400mm dia
138072 Taking out old C.I./G.I. Pipes including specials etc., - 1 metre 391.96
350mm dia
138073 Taking out old C.I./G.I. Pipes including specials etc., - 1 metre 280.51
300mm dia
138074 Taking out old C.I./G.I. Pipes including specials etc., - 1 metre 241.16
250mm dia
138075 Taking out old C.I./G.I. Pipes including specials etc., - 1 metre 200.96
200mm dia
138076 Taking out old C.I./G.I. Pipes including specials etc., - 1 metre 154.73
150mm dia
138077 Taking out old C.I./G.I. Pipes including specials etc., - 1 metre 140.91
125mm dia
138078 Taking out old C.I./G.I. Pipes including specials etc., - 1 metre 114.94
100mm dia
138079 Taking out old C.I./G.I. Pipes including specials etc., - 1 metre 94.25
80mm dia.
138080 Taking out old C.I./G.I. Pipes and relaying the same 1
including followings : i) Taking out & refixing of specials
like sockets, bends, tees, valves etc. with cutting and
threading of pipes as required. ii) Jointing of pipes as
required. iii) Fixing pipe securely to wall, post or any other
structure with necessary M.S. hook / clamp / rod / flat,
nails etc. with all lead and lift
138081 Taking out old C.I./G.I. Pipes and relaying the sa etc., - 15 1 metre 88.04
mm to 25 mm dia
138082 Taking out old C.I./G.I. Pipes and relaying the sa etc., - 1 metre 102.98
Above 25 mm dia and upto 50 mm
138083 Taking out old C.I./G.I. Pipes and relaying the sa etc., - 1 metre 144.22
Above 50 mm dia and upto 100 mm
138084 Taking out old C.I./G.I. Pipes and relaying the sa etc., - 1 metre 182.38
Above 100 mm dia and upto 150 mm
138085 Taking out old C.I./G.I. Pipes and relaying the sa etc., - 1 metre 237.10
Above 150 mm dia and upto 450 mm
138090 Cleaning old C.I./G.I. Pipes with all lead and lift etc. 1
138091 Cleaning old C.I./G.I. Pipes with all lead and lif etc., - 15 1 metre 16.38
mm dia & upto 80 mm dia
138092 Cleaning old C.I./G.I. Pipes with all lead and lif etc., - 1 metre 26.85
Above 80 mm dia & upto 150 mm dia
138093 Cleaning old C.I./G.I. Pipes with all lead and lif etc., - 1 metre 37.32
Above 150 mm dia & upto 250 mm dia
138094 Cleaning old C.I./G.I. Pipes with all lead and lif etc., - 1 metre 45.06
Above 250 mm dia & upto 300 mm dia
138095 Cleaning old C.I./G.I. Pipes with all lead and lif etc., - 1 metre 51.43
Above 300 mm dia & upto 400 mm dia
138110 Extra for laying or taking out C.I./GI /WI / DI water main or 1
underground drain pipe along side running track where
adequate precaution are to be taken and un - interrupted
work is not possible
138111 Extra for laying or taking out C.I./GI /WI / DI wa etc., - 1 metre 51.13
Upto 80 mm dia
138112 Extra for laying or taking out C.I./GI /WI / DI wa etc., - 1 metre 83.05
Above 80 mm dia & upto 150 mm dia
138113 Extra for laying or taking out C.I./GI /WI / DI wa etc., - 1 metre 99.01
Above 150 mm dia & upto 250 mm dia
138114 Extra for laying or taking out C.I./GI /WI / DI wa etc., - 1 metre 130.92
Above 250 mm dia
138122 Cleaning of overhead and underground water tanks etc., - 1 litre 0.32
For Tanks capacity over 5000 litres
139010 1
139020 1
139030 1
139040 1
139050 1
139060 1
139070 1
139080 1
CHAPTER - 14 : DRAINAGE AND 1
SEWERAGE
141011 Providing, laying and jointing glazed stoneware pi etc., - 1 metre 139.31
100mm diameter
141012 Providing, laying and jointing glazed stoneware pi etc., - 1 metre 205.15
150mm diameter
141013 Providing, laying and jointing glazed stoneware pi etc., - 1 metre 317.16
200mm diameter
141014 Providing, laying and jointing glazed stoneware pi etc., - 1 metre 348.56
230mm diameter
141015 Providing, laying and jointing glazed stoneware pi etc., - 1 metre 428.14
250mm diameter
141016 Providing, laying and jointing glazed stoneware pi etc., - 1 metre 620.17
300mm diameter
141017 Providing, laying and jointing glazed stoneware pi etc., - 1 metre 732.65
400mm diameter
141020 Providing, laying and jointing half round salt glazed stone- 1
ware pipes including bends etc with 1:1 cement and
ordinary sand mortar including bends etc.
141021 Providing, laying and jointing half round salt gl etc., - 1 metre 121.89
100mm dia. S.W. pipe
141022 Providing, laying and jointing half round salt gl etc., - 1 metre 152.62
150mm dia. S.W. pipe
141023 Providing, laying and jointing half round salt gl etc., - 1 metre 208.06
200mm dia. S.W. pipe
141024 Providing, laying and jointing half round salt gl etc., - 1 metre 265.78
250mm dia. S.W. pipe
141025 Providing, laying and jointing half round salt gl etc., - 1 metre 346.18
300mm dia. S.W. pipe
141031 Providing and laying cement concrete 1: etc., - 100mm 1 metre 267.68
diameter S.W. pipe
141032 Providing and laying cement concrete 1: etc., - 150mm 1 metre 327.36
diameter S.W. pipe
141033 Providing and laying cement concrete 1: etc., - 200mm 1 metre 381.62
diameter S.W. pipe
141034 Providing and laying cement concrete 1: etc., - 230mm 1 metre 417.80
diameter S.W. pipe
141035 Providing and laying cement concrete 1: etc., - 250mm 1 metre 441.31
diameter S.W. pipe
141041 Providing and laying cement concrete 1: etc., - 100mm 1 metre 126.82
diameter S.W. pipe
141042 Providing and laying cement concrete 1: etc., - 150mm 1 metre 205.53
diameter S.W. pipe
141043 Providing and laying cement concrete 1: etc., - 200mm 1 metre 241.59
diameter S.W. pipe
141044 Providing and laying cement concrete 1: etc., - 230mm 1 metre 265.03
diameter S.W. pipe
141045 Providing and laying cement concrete 1: etc., - 250mm 1 metre 281.25
diameter S.W. pipe
141046 Providing and laying cement concrete 1: etc., - 300mm 1 metre 324.52
diameter S.W. pipe
141047 Providing and laying cement concrete 1: etc., - 400mm 1 metre 416.47
diameter S.W. pipe
141051 Providing and fixing square-mouth S.W. gully trap etc., - 1 Each 1087.30
100x100mm size P type With F.P.S. bricks class
designation 75
141052 Providing and fixing square-mouth S.W. gully trap etc., - 1 Each 1137.77
100x100mm size P type With Sewer bricks confirming to
IS:4885
141053 Providing and fixing square-mouth S.W. gully trap etc., - 1 Each 1147.36
150x100mm size P type With F.P.S. bricks class
designation 75
141054 Providing and fixing square-mouth S.W. gully trap etc., - 1 Each 1222.25
150x100mm size P type With Sewer. bricks confirming to
IS:4885
141055 Providing and fixing square-mouth S.W. gully trap etc., - 1 Each 1216.48
180x150mm size P type With F.P.S. bricks class
designation 75
141056 Providing and fixing square-mouth S.W. gully trap etc., - 1 Each 1266.95
180x150mm size P type With Sewer bricks confirming to
IS:4885
142011 Providing and laying non-pressure NP2 class (ligh etc., - 1 metre 242.22
100mm dia. R.C.C. pipe
142012 Providing and laying non-pressure NP2 class (ligh etc., - 1 metre 262.75
150mm dia. R.C.C. pipe
142013 Providing and laying non-pressure NP2 class (ligh etc., - 1 metre 400.44
250mm dia. R.C.C. pipe
142014 Providing and laying non-pressure NP2 class (ligh etc., - 1 metre 458.99
300mm dia. R.C.C. pipe
142015 Providing and laying non-pressure NP2 class (ligh etc., - 1 metre 586.50
450mm dia. R.C.C. pipe
142016 Providing and laying non-pressure NP2 class (ligh etc., - 1 metre 679.65
500mm dia. R.C.C. pipe
142017 Providing and laying non-pressure NP2 class (ligh etc., - 1 metre 1050.37
600mm dia. R.C.C. pipe
142018 Providing and laying non-pressure NP2 class (ligh etc., - 1 metre 1163.07
700mm dia. R.C.C. pipe
142019 Providing and laying non-pressure NP2 class (ligh etc., - 1 metre 1352.75
800mm dia. R.C.C. pipe
142021 Providing and laying non-pressure NP2 class (ligh etc., - 1 metre 1781.02
900mm dia. R.C.C. pipe
142022 Providing and laying non-pressure NP2 class (ligh etc., - 1 metre 2158.32
1000mm dia. R.C.C. pipe
142023 Providing and laying non-pressure NP2 class (ligh etc., - 1 metre 2575.62
1100mm dia. R.C.C. pipe
142024 Providing and laying non-pressure NP2 class (ligh etc., - 1 metre 2888.29
1200mm dia. R.C.C. pipe
142031 Providing and laying non-pressure NP3 class (mediu etc., 1 metre 602.49
- 300mm dia. R.C.C. pipe
142032 Providing and laying non-pressure NP3 class (mediu etc., 1 metre 676.31
- 400mm dia. R.C.C. pipe
142033 Providing and laying non-pressure NP3 class (mediu etc., 1 metre 744.70
- 450mm dia. R.C.C. pipe
142034 Providing and laying non-pressure NP3 class (mediu etc., 1 metre 881.52
- 500mm dia. R.C.C. pipe
142035 Providing and laying non-pressure NP3 class (mediu etc., 1 metre 1316.64
- 600mm dia. R.C.C. pipe
142036 Providing and laying non-pressure NP3 class (mediu etc., 1 metre 1492.47
- 700mm dia. R.C.C. pipe
142037 Providing and laying non-pressure NP3 class (mediu etc., 1 metre 1749.52
- 800mm dia. R.C.C. pipe
142040 Providing and laying non-pressure NP3 class (medium 1
duty ) R.C.C. pipes including bends etc with collars jointed
with stiff mixture of cement mortar in the proportion of 1:2
(1cement: 2fine sand) including testing of joints etc.
complete above 800mm dia.
142041 Providing and laying non-pressure NP3 class (mediu etc., 1 metre 2120.64
- 900mm dia. R.C.C. pipe
142042 Providing and laying non-pressure NP3 class (mediu etc., 1 metre 2372.27
- 1000mm dia. R.C.C. pipe
142043 Providing and laying non-pressure NP3 class (mediu etc., 1 metre 2803.04
- 1100mm dia. R.C.C. pipe
142044 Providing and laying non-pressure NP3 class (mediu etc., 1 metre 2964.72
- 1200mm dia. R.C.C. pipe
MANHOLES 1
143051 Constructing brick masonry circular type manh etc., - With 1 Each 4438.29
F.P.S Bricks class designation 7.5
143052 Constructing brick masonry circular type manh etc., - With 1 Each 4674.65
Sewer bricks confirming to IS: 4885
143060 Extra depth for circular type manhole 0.91mm internal dia 1
(at bottom) beyond 0.91 m to 1.67m
143061 Extra depth for circular type manhole 0.91m etc., - With 1 metre 2171.49
F.P.S. Bricks class designation 7.5
143062 Extra depth for circular type manhole 0.91m etc., - With 1 metre 2493.31
Sewer bricks conforming to IS : 4885
143070 Constructing brick masonry circular type manhole1.22m 1
internal dia at bottom and 0.56m dia at top in cement
mortar 1:4 (1cement: 4coarse sand), in side cement
plaster 12mm thick with cement mortar 1:3 (1cement:
3coarse sand) finished with a floating coat of neat cement,
foundation concrete 1:3:6 mix (1cement: 3coarse sand:
6graded stone aggregate 40mm nominal size) and
making necessary channel in cement concrete 1:2:4
(1cement: 2coarse sand: 4graded stone aggregate
20mm nominal size) finished with a floating coat of neat
cement all complete as per standard design.
1.68m deep with S.F.R.C. cover and frame (heavy duty,
HD-20 grade designation) 560mm internal diameter
conforming to IS: 12592, total weight of cover and frame
to be not less than 182kg, fixed in cement concrete 1:2:4
(1cement: 2coarse sand:
4graded stone aggregate 20mm nominal size) including
centering, shuttering all complete. (Excavation, foot rests
and 12mm thick cement plaster at the external surface
shall be paid for separately)
143071 Constructing brick masonry circular etc., - With F.P.S 1 Each 7765.01
Bricks class designation 7.5
143072 Constructing brick masonry circular etc., - With Sewer 1 Each 8279.28
bricks conforming to IS: 4885
143080 Extra depth for circular type manhole 1.22 mm internal dia 1
(at bottom) beyond 1.68m to 2.29 m
143081 Extra depth for circular type manhole 1.22 etc., - With 1 metre 2810.77
F.P.S. Bricks class designation 7.5
143082 Extra depth for circular type manhole 1.22 etc., - With 1 metre 3230.82
Sewer bricks confirming to IS:4885
143090 Constructing brick masonry circular manhole 1.52m 1
internal dia at bottom and 0.56m dia at top in cement
mortar 1:4 (1cement: 4coarse sand) inside cement plaster
12mm thick with cement mortar 1:3 (1cement: 3coarse
sand) finished with a floating coat of neat cement,
foundation concrete 1:3:6 (1cement:
3coarse sand: 6graded stone aggregate 40mm nominal
size) and making necessary channel in cement concrete
1:2:4 (1cement: 2coarse sand:
4graded stone aggregate 20mm nominal size)
finished with a floating coat of neat cement all complete
as per standard design.2.30m deep with S.F.R.C. cover
and frame (heavy duty, HD-20 grade designation) 560mm
internal diameter conforming to IS: 12592, total weight of
cover and frame to be not less than 182kg, fixed in
cement concrete 1:2:4 (1cement: 2coarse sand: 4graded
stone aggregate
20mm nominal size) including centering, shuttering all
complete. (Excavation, foot rests and 12mm thick cement
plaster at the external surface shall be paid for separately)
143091 Constructing brick masonry circular manhole 1.52m etc., - 1 Each 15924.01
With F.P.S. bricks class designation 7.5
143092 Constructing brick masonry circular manhole 1.52m etc., - 1 Each 17379.62
With Sewer bricks confirming to IS:4885
143100 Extra depth for circular type manhole 1.52m internal dia 1
(at bottom) beyond 2.30m
143101 Extra depth for circular type manhole 1.52m intern etc., - 1 metre 6766.43
With F.P.S. bricks class designation 7.5
143102 Extra depth for circular type manhole 1.52m intern etc., - 1 metre 7852.64
With Sewer bricks confirming to IS:4885
143111 Providing M.S. foot rests including fixing in manh etc., - 1 Each 174.85
With 20x20mm square bar
143112 Providing M.S. foot rests including fixing in manh etc., - 1 Each 148.02
With 20mm diameter round bar
143121 Replacement of M.S. foot rests in manholes/ septi etc., - 1 Each 201.97
With 20x20mm square bar
143122 Replacement of M.S. foot rests in manholes/ septi etc., - 1 Each 175.14
With 20mm diameter round bar
143131 Supplying and fixing C.I. cover without frame etc., - 1 Each 1129.66
455x610mm rectangular C.I. cover (light duty) the weight
of the cover to be not less than 23kg
143132 Supplying and fixing C.I. cover without frame etc., - 1 Each 2407.31
500mm diameter C.I. cover (medium duty) the weight of
cover to be not less than 58kg
143133 Supplying and fixing C.I. cover without frame etc., - 1 Each 4672.23
560mm diameter C.I. cover (heavy duty) the weight of
cover to be not less than 108kg
143141 Providing and fixing in position precast etc., - LD- 2.5 1 Each 1064.00
rectangular shape 600x450mm internal dimensions
143142 Providing and fixing in position precast etc., - LD- 2.5 1 Each 907.33
square shape 450mm internal dimensions
143143 Providing and fixing in position precast etc., - LD- 2.5 1 Each 806.28
circular shape 450 mm internal diameter
143144 Providing and fixing in position precast etc., - MD- 10 1 Each 987.48
square shape 450mm internal dimensions
143145 Providing and fixing in position precast etc., - MD- 10 1 Each 964.38
circular shape 500mm internal diameter
143146 Providing and fixing in position precast etc., - HD- 20 1 Each 1368.17
circular shape 560mm internal diameter
143147 Providing and fixing in position precast etc., - EHD- 35 1 Each 1515.68
circular shape 560mm internal dia.
143151 Supplying, fitting & fixing in position rei etc., - a) 3 MT load 1 Each 1016.45
bearing capacity manhole cover provided with 2 nos. lifter
lock fitted with matching frame (Size of cover : 440 mm
dia. x 50 mm thick and size of frame : 530 mm dia. x 100
mm thick)
143152 Supplying, fitting & fixing in position rei etc., - b) 12 MT 1 Each 1268.24
load bearing capacity manhole cover provided with 2 nos.
lifter lock fitted with matching frame (Size of cover : 590
mm dia. x 75 mm thick and size of frame : 750 mm dia. x
150 mm thick)
143153 Supplying, fitting & fixing in position rei etc., - c) 25 MT 1 Each 1546.56
load bearing capacity manhole cover provided with 2 nos.
lifter lock fitted with matching frame (Size of cover : 630
mm dia. x 100 mm thick and size of frame : 790 mm dia. x
185 mm thick)
143160 Supplying and fixing C.I. cover 300x300mm without frame 1 Each 271.03
for gully trap (standard pattern) the weight of cover to be
not less than 4.5kg
143171 Making connection of drain or sewer line with exis etc., - 1 Each 186.61
For pipes 100 to 230mm diameter
143172 Making connection of drain or sewer line with exis etc., - 1 Each 216.10
For pipes 250 to 300mm diameter
143173 Making connection of drain or sewer line with exis etc., - 1 Each 308.68
For pipes 350 to 450mm diameter
143181 Providing sand cast iron drop connection external etc., - 1 Each 3827.12
100mm dia. Sand cast iron drop connection
143182 Providing sand cast iron drop connection external etc., - 1 Each 5442.08
150mm dia. Sand cast iron drop connection
143190 Extra for depths beyond 60cm of sand cast iron drop 1
connection complete
143191 Extra for depths beyond 60cm of sand cast iron dro etc., - 1 Each 1254.98
For 100mm dia. Sand cast iron drop connection
143192 Extra for depths beyond 60cm of sand cast iron dro etc., - 1 Each 1985.19
For 150mm dia. Sand cast iron drop connection
143201 Raising manhole cover and frame slab to required etc., - 1 Each 695.75
Rectangular manhole 90x80cm (Inside dimensions)
with rectangular cover 600x450mm of grade LD- 2.5
143202 Raising manhole cover and frame slab to required etc., - 1 Each 1099.25
Rectangular manhole 120x90cm (Inside dimensions)
with circular cover 500mm dia of grade MD- 10
143203 Raising manhole cover and frame slab to required etc., - 1 Each 1025.12
Rectangular manhole 120x90cm (Inside dimensions)
with circular cover 560mm dia of grade HD- 20
143204 Raising manhole cover and frame slab to required etc., - 1 Each 99.73
Circular manhole 140cm dia (Inside dimensions) with
circular cover 600mm dia of grade EHD- 35
143211 Constructing brick masonry road gully chambe etc., - With 1 Each 2200.53
F.P.S. bricks
143221 Constructing brick masonry road gully chambe etc., - With 1 Each 3069.37
F.P.S. bricks
143230 Constructing brick masonry road gully chamber 1
110x50x77.5cm with bricks of class designation 7.5 in
cement mortar 1:4(1cement: 4 Coarse Sand ) including
500x450mm precast R.C.C. horizontal grating with frame
and vertical grating complete as per standard design
143231 Constructing brick masonry road gully chambe etc., - With 1 Each 3727.69
F.P.S. bricks
143251 Extra for depth beyond 45cm of brick mason etc., - For 1 metre 1770.10
455x610mm size ( Inside dimensions) , With
F.P.S. bricks
143252 Extra for depth beyond 45cm of brick mason etc., - For 1 metre 1929.05
500x700mm size (Inside dimensions), With F.P.S. bricks
143253 Extra for depth beyond 45cm of brick mason etc., - For 1 metre 2243.65
600x850mm size (Inside dimensions), With F.P.S. bricks
143260 Constructing grease trap 80x40x46cm (inside) with one 1
brick thick brick masonry wall with inlet and outlet drain
with bricks of class designation 7.5 in cement mortar 1:4
(1cement: 4fine sand) plastered
12mm thick with 1:4 (1cement: 4coarse sand) finished
with a floating coat of neat cement on inside and exposed
surfaces having two stone/ R C Concrete baffled walls
34.5cm deep and third one 19cm deep, each 40mm thick
and 45cm long embedded 2.5cm on either side in brick
masonry, 40mm thick 100x60cm stone/ R C C cover and
7.5cm thick bed concrete
1:5:10 (1cement: 5fine sand: 10graded stone aggregate
40mm nominal size) with 40mm flooring in cement
concrete 1:2:4 (1cement: 2coarse sand:
4graded stone aggregate 12.5mm nominal size) with
a floating coat of neat cement including all earth
excavation, refilling and disposal of surplus earth
complete as per standard design
143261 Constructing grease trap 80x40x46cm (inside) with etc., - 1 Each 1588.27
With F.P.S. bricks
143271 Making soak pit 2.5m diameter 3.0m deep wit etc., - With 1 Each 9828.43
F.P.S. bricks
143272 Making soak pit 2.5m diameter 3.0m deep wit etc., - Extra 1 cm depth 32.76
for every cm depth above 3.0 m as per site conditions if
required
143281 Constructing soak pit 1.20x1.20x1.20m filled etc., - Extra 1 cm depth 10.21
for every cm depth above 1.20 m as per site conditions if
required
143291 Providing and fixing S.W. intercepting t etc., - 100mm dia. 1 Each 233.93
143292 Providing and fixing S.W. intercepting t etc., - 150mm dia. 1 Each 329.22
MISCELLANEOUS 1
144010 Cutting holes upto 30x30cm in walls including making 1
good the same.(In OLD work only when specially ordered)
144011 Cutting holes upto 30x30cm in walls including maki etc., - 1 Each 97.23
With F.P.S. bricks
144020 Cutting holes upto 15x15cm in R.C.C. floors and roofs for 1 Each 107.20
passing drain pipe etc. and repairing the hole after
insertion of drain pipe etc. with cement concrete
1:1.5:3 (1cement: 1.5 coarse sand: 3graded stone
aggregate 20mm nominal size) including finishing
complete so as to make it leak proof.(In OLD work only
when specially ordered)
144030 Making holes upto 20x20cm and embedding pipes upto 1 Each 45.27
150mm diameter in masonry and filling with cement
concrete 1:2:4 (1cement: 2 coarse sand:
4graded stone aggregate 20mm nominal size) including
disposal of malba.(In OLD work only when specially
ordered)
144040 Providing and fixing spun R.C.C. tapering vent shaft 1 Each 5724.39
450mm (clear dia. at the base and 150/125 mm dia at the
top) 9.10m overall length with cowl including necessary
excavation & concrete complete, as per standard plan
144050 Supplying, fitting & fixing in position C.I. Jali with frame 1
with cement concrete 1:2:4 including all lead
144051 Supplying, fitting & fixing in position C.I. Jali etc., - 300 1 Each 1351.49
mm x 600 mm jali weighing 23 Kg
144052 Supplying, fitting & fixing in position C.I. Jali etc., - 450 1 Each 2747.61
mm x 600 mm jali weighing 56 Kg
144061 Supplying, fitting & fixing in position Polyelast etc., - a) 12 1 Each 1825.79
MT load bearing capacity Polyelastomer rectangular
grating with R.C.P.C. frame (Size of grating : 450 mm x
380 mm x 50 mm thick, size of frame : 600 mm x 550 mm
x 160 mm)
144062 Supplying, fitting & fixing in position Polyelast etc., - b) 3 1 Each 1351.20
MT load bearing capacity Polyelastomer rectangular
grating with R.C.P.C. frame (Size of grating : 380 mm x
290 mm x 25 mm thick size of frame : 480 mm x 410 mm
x 90 mm)
144063 Supplying, fitting & fixing in position Polyelast etc., - c) 1 1 Each 1115.41
MT load bearing capacity Polyelastomer rectangular
grating with R.C.P.C. frame (Size of grating : 290 mm x
210 mm x 25 mm thick size of frame : 360 mm x 300 mm
x 65 mm)
00 New Items To Be Added By Zonal Railways 1
145010 1
145020 1
145030 1
145040 1
CHAPTER - 15 : SANITARY 1
INSTALLATIONS
151011 Providing and fixing water closet squatting etc., - White 1 Each 2854.42
Vitreous China Orissa pattern W.C. pan of size 580x440-
mm with integral type foot rests
151012 Providing and fixing water closet squatting etc., - Stainless 1 Each 5367.90
Steel AISI- 304 (18/8) Orissa pattern W.C. pan of size
585x480 mm with integrated type foot rests
151021 Providing and fixing white vitreous china pedestal etc., - 1 Each 2660.44
W.C. pan with ISI marked white solid plastic seat and lid
151022 Providing and fixing white vitreous china pedestal etc., - 1 Each 2663.93
W.C. pan with ISI marked black solid plastic seat and lid
151031 Providing and fixing white vitreous china pedestal etc., - 1 Each 4208.21
W.C. pan with ISI marked white solid plastic seat and lid.
151032 Providing and fixing white vitreous china pedestal etc., - 1 Each 4211.69
W.C. pan with ISI marked black solid plastic seat and lid.
151040 Providing and fixing white vitreous china flat back or wall 1
corner type lipped front urinal basin of
430x260x350mm and 340x410x265mm sizes respectively
with automatic flushing cistern , with standard flush pipe
and C.P. brass spreaders with brass unions and G.I.
clamps complete, including painting of fittings and
brackets, cutting and making good the walls and floors
wherever required
151041 Providing and fixing white vitreous china flat bac etc., - 1 Each 2731.27
One urinal basin with 5litre white P.V.C. automatic flushing
cistern
151042 Providing and fixing white vitreous china flat bac etc., - 1 Each 4692.30
Range of two urinal basins with 10 litre white
P.V.C. automatic flushing cistern
151043 Providing and fixing white vitreous china flat bac etc., - 1 Each 6150.89
Range of three urinal basins with 10litre white
P.V.C. automatic flushing cistern
151044 Providing and fixing white vitreous china flat bac etc., - 1 Each 8182.00
Range of four urinal basins with 15 litre white
P.V.C. automatic flushing cistern
151050 Providing and fixing white, vitreous china flat back half 1
stall urinal of 580x380x350mm with white P.V.C. automatic
flushing cistern, with fittings, standard size C.P. brass
flush pipe, spreaders with unions and clamps (all in C.P.
brass) with waste fitting as per IS: 2556, C.I. trap with
outlet grating and other coupling in C.P. brass including
painting of fittings and cutting and making good the walls
and floors wherever required
151051 Providing and fixing white, vitreous china flat ba etc., - 1 Each 4622.39
Single half stall urinal with 5litre P.V.C. automatic flushing
cistern
151052 Providing and fixing white, vitreous china flat ba etc., - 1 Each 7317.91
Range of two half stall urinals with 5litre P.V.C. automatic
flushing cistern
151053 Providing and fixing white, vitreous china flat ba etc., - 1 Each 9577.21
Range of three half stall urinals with 10litre P.V.C.
automatic flushing cistern
151054 Providing and fixing white, vitreous china flat ba etc., - 1 Each 11749.04
Range of four half stall urinals with 10litre P.V.C.
automatic flushing cistern
151060 Providing and fixing one piece construction white vitreous 1
china squatting plate with an integral longitudinal flushing
pipe, white, P.V.C. automatic flushing cistern, with fittings,
standard size G.I. flush pipe for back and front flush with
standard spreader pipes with fittings, G.I. clamps and C.P.
brass coupling complete including painting of fittings and
cutting and making good the walls and floors etc.
wherever required
151061 Providing and fixing one piece construction white etc., - 1 Each 3207.89
Single squatting plate of 600x350 mm size with 5 litre
P.V.C. automatic flushing cistern
151062 Providing and fixing one piece construction white etc., - 1 Each 4918.08
Range of two squatting plates with 5litre P.V.C. automatic
flushing cistern
151063 Providing and fixing one piece construction white etc., - 1 Each 6329.19
Range of three squatting plates with 10litre P.V.C.
automatic flushing cistern
151064 Providing and fixing one piece construction white etc., - 1 Each 7593.63
Range of four squatting plates with 10litre P.V.C.
automatic flushing cistern
151070 Providing and fixing wash basin with C.I./ M.S. brackets, 1
15mm C.P. brass pillar taps, 32mm C.P. brass waste of
standard pattern, including painting of fittings and
brackets, cutting and making good the walls wherever
required
151071 Providing and fixing wash basin with C.I./ M.S. b etc., - 1 Each 1738.57
white, vitreous china wash basin size 630x450mm with a
pair of 15mm C.P. brass pillar taps
151072 Providing and fixing wash basin with C.I./ M.S. b etc., - 1 Each 1578.31
white vitreous china wash basin size 630x450mm with a
single 15mm C.P. brass pillar taps
151073 Providing and fixing wash basin with C.I./ M.S. b etc., - 1 Each 1524.86
white vitreous china wash basin size 550x400mm with a
pair of 15mm C.P. brass pillar taps
151074 Providing and fixing wash basin with C.I./ M.S. b etc., - 1 Each 1364.59
white vitreous china flat back wash basin size
550x400mm with single 15mm C.P. brass pillar tap
151075 Providing and fixing wash basin with C.I./ M.S. b etc., - 1 Each 1575.98
white vitreous china angle back wash basin size
600x480mm with single 15mm C.P. brass pillar tap
151076 Providing and fixing wash basin with C.I./ M.S. b etc., - 1 Each 1208.95
white vitreous china angle back wash basin size
400x400mm with single 15mm C.P. brass pillar tap
151077 Providing and fixing wash basin with C.I./ M.S. b etc., - 1 Each 1186.88
white, vitreous china flat back wash basin size
450x300mm with single 15mm C.P. brass pillar tap
151078 Providing and fixing wash basin with C.I./ M.S. b etc., - 1 Each 2891.94
white, vitreous china surgeon type wash basin of size
660x460mm with a pair of 15mm C.P. brass pillar taps
with elbow operated levers
151079 Providing and fixing wash basin with C.I./ M.S. b etc., - 1 Each 1342.52
white, vitreous china flat back wash basin size
520X520 mm corner type with single 15mm C.P. brass
pillar tap
151081 Providing and fixing special type wash basin with etc., - 1 Each 2271.72
White, vitreous china Surgeon type wash basin of size
660x460mm with single 15mm C.P. brass pillar taps with
elbow operated levers ISI marked
151082 Providing and fixing special type wash basin with etc., - 1 Each 2785.10
Stainless Steel AISI- 304 (18/8) Round basin
405x355mm with single 15mm C.P. brass pillar tap
151083 Providing and fixing special type wash basin with etc., - 1 Each 2583.80
Stainless Steel AISI- 304 (18/8) wash basin
530x345mm with single 15mm C.P. brass pillar tap
151100 Supplying and fixing white vitreous china circular wash 1 Each 1339.28
basin category No. 1004 group I, size 470 mm. dia with
CP brass pillar tap, 32 mm. rubber plug and CP brass
chain, 32 mm. CP brass waste of standard pattern
connected with GI waste pipe upto floor level and 32 mm.
dia CP brass trap and unions complete including cutting
and making good the walls etc. as a complete job
151110 Providing and fixing white, vitreous china pedestal for 1 Each 1042.84
wash basin completely recessed at the back for the
reception of pipes and fittings
151121 Providing and fixing white, vitreous china water etc., - 1 Each 731.80
Long pattern W.C. pan of size 580mm
151122 Providing and fixing white, vitreous china water etc., - 1 Each 1240.18
Orissa pattern W.C. pan of size 580x440mm
151130 Extra for using coloured W.C. pan instead of white, W.C. 1
pan
151131 Extra for using coloured W.C. pan instead of white etc., - 1 Each 461.12
Orissa pattern W.C. pan 580x440mm or of any other size
151132 Extra for using coloured W.C. pan instead of white etc., - 1 Each 299.67
Long pan pattern W.C. pan
151140 Providing and fixing white, vitreous china pedestal 1 Each 1037.88
European type water closet pan
151150 Extra for using coloured pedestal type W.C. pan 1 Each 1037.22
(European type) with low level cistern of same colour
instead of white, vitreous china W.C. pan and cistern
151161 Providing and fixing a pair of white, vitreous chi etc., - 1 pair 142.79
250x130x30mm
151162 Providing and fixing a pair of white, vitreous chi etc., - 1 pair 130.02
250x125x25mm
151171 Providing and fixing a pair of approved col etc., - 1 pair 176.48
250x130x30mm
151172 Providing and fixing a pair of approved col etc., - 1 pair 161.38
250x125x25mm
151180 Providing and fixing P.V.C. low level flushing cistern with 1
manually controlled device (handle lever) conforming to
IS: 7231, with all fittings and fixtures complete
151181 Providing and fixing P.V.C. low level flush etc., - 10 litre 1 pair 846.25
capacity- white
151182 Providing and fixing P.V.C. low level flush etc., - 10 litre 1 pair 931.04
capacity- Coloured
151191 Providing and fixing controlled flush, low l etc., - 10 litre 1 Each 1431.37
(full flush) capacity- White
151192 Providing and fixing controlled flush, low l etc., - 10 litre 1 Each 1879.71
(full flush) capacity- Coloured
151200 Providing and fixing 5 litres C.I. automatic flushing cistern 1 Each 412.59
with fittings
151210 Providing and fixing 10 litres C.I. automatic flushing 1 Each 567.07
cistern with fittings
151220 Providing and fixing solid plastic seat with lid for pedestal 1
type W.C. pan complete
151221 Providing and fixing solid plastic seat with lid etc., - White, 1 Each 381.55
solid plastic seat with lid
151222 Providing and fixing solid plastic seat with lid etc., - Black 1 Each 385.04
solid plastic seat with lid
151230 Extra for providing coloured other than black solid P.V.C. 1 Each 145.19
plastic seat and cover in European type W.C. pan, instead
of white, plastic seat and cover
151240 Providing and fixing standard G.I. chain with G.I. pull 1 Each 38.40
151250 Providing and fixing G.I. inlet connection for flush pipe 1 Each 80.72
connecting with W.C. pan
151260 Providing and fixing white, vitreous china flat back or wall 1 Each 818.79
corner type lipped front urinal basin of
430x260x350mm and 340x410x265mm sizes respectively
151270 Providing and fixing white, vitreous china squatting plate 1 Each 1431.08
urinal with integral longitudinal flush pipe
151281 Providing and fixing white, vitreous china w etc., - Flat 1 Each 953.38
back wash basin of size 630x450mm
151282 Providing and fixing white, vitreous china w etc., - Flat 1 Each 739.67
back wash basin of size 550x400mm
151283 Providing and fixing white, vitreous china w etc., - Angle 1 Each 951.06
back wash basin of size 600x480mm
151284 Providing and fixing white, vitreous china w etc., - Angle 1 Each 584.03
back wash basin of size 400x400mm
151285 Providing and fixing white, vitreous china w etc., - Flat 1 Each 561.96
back wash basin of size 450x300mm
151286 Providing and fixing white, vitreous china w etc., - 1 Each 1186.84
Surgeon type wash basin of size 660x460mm
151290 Providing and fixing white, glazed fire clay kitchen sink of 1 Each 2253.81
size 600x450x250mm including making all connections
excluding cost of fittings
151300 Providing and fixing vitreous china dual purpose closet 1 Each 5146.36
suitable for use as squatting pan or European type water
closet (Anglo Indian W.C. pan) with seat lid with C.P.
brass hinges and rubber buffers, 10litre low level flushing
cistern with fittings and brackets, 40mm flush bend 20mm
overflow pipe with specials of standard make and
mosquito proof coupling of approved municipal design
complete including painting of fittings and brackets,
cutting and making good the walls and floors wherever
required
SINK 1
152010 Providing and fixing white, glazed fire clay kitchen sink of 1 Each 2729.21
size 600x450x250mm kitchen sink with C.I. brackets, C.P.
brass chain with rubber plug,
40mm C.P. brass waste compete, including painting the
fittings and brackets, cutting and making good the walls
wherever required
152021 Providing and fixing Stainless Steel AISI- etc., - 510x1040 1 Each 4713.95
mm bowl depth 250mm
152022 Providing and fixing Stainless Steel AISI- etc., - 510x1040 1 Each 4075.13
mm bowl depth 225mm
152023 Providing and fixing Stainless Steel AISI- etc., - 510x1040 1 Each 3958.98
mm bowl depth 200mm
152024 Providing and fixing Stainless Steel AISI- etc., - 510X1040 1 Each 3029.78
mm bowl depth 178mm
152031 Providing and fixing Stainless Steel AISI- etc., - 1 Each 4119.47
610x510mm bowl depth 200mm
152032 Providing and fixing Stainless Steel AISI- etc., - 1 Each 3888.12
610x460mm bowl depth 200mm
152033 Providing and fixing Stainless Steel AISI- etc., - 1 Each 2852.27
470X420mm bowl depth 178mm
152040 Providing and fixing white, vitreous china laboratory sink 1
with C.I. brackets, C.P. brass chain with rubber plug
40mm C.P. brass waste and
40mm C.P. brass trap with necessary C.P. brass unions
complete including painting of fittings and brackets,
cutting and making good the wall wherever required
152041 Providing and fixing white, vitreous ch etc., - Size 1 Each 2250.75
450x300x150mm
152042 Providing and fixing white, vitreous ch etc., - Size 1 Each 3533.05
600x450x200mm
152050 Providing and fixing white, glazed fire clay draining board 1 Each 838.90
of size 600x450x25mm with C.I./ M.S. brackets including
painting of brackets, cutting and making good the walls
wherever required
152060 Providing and fixing 75cm X 40cm X 4cm vitreous china 1 Each 1015.45
draining board for sink supported on painted R.S or C.I
brackets, complete including cutting and making good the
wall
152071 Providing and fixing white, vitreous ch etc., - Size 1 Each 1436.11
450x300x150mm
152072 Providing and fixing white, vitreous ch etc., - Size 1 Each 2718.41
600x450x200mm
152080 Providing and fixing P.V.C. waste pipe for sink or wash 1
basin including P.V.C. waste fittings complete
152081 Providing and fixing P.V.C. waste pipe for sink or etc., - 1 Each 45.30
Semi rigid pipe 32mm dia.
152082 Providing and fixing P.V.C. waste pipe for sink or etc., - 1 Each 51.11
Flexible pipe 32mm dia.
152083 Providing and fixing P.V.C. waste pipe for sink or etc., - 1 Each 52.27
Semi rigid pipe40mm dia.
152084 Providing and fixing P.V.C. waste pipe for sink or etc., - 1 Each 53.43
Flexible pipe 40mm dia.
152090 Providing and fixing 100mm sand cast iron grating for 1 Each 18.65
gully, trap
152100 Providing and fixing in position 25mm diameter mosquito 1 Each 37.05
proof coupling of approved municipal design
152110 Providing and fixing 600x450mm bevelled edge mirror , 1 Each 711.82
5.5 mm thick of float glass (of approved quality) complete
with 6mm thick hard board ground fixed to wooden cleats
with C.P. brass screws and washers complete
152121 Providing and fixing mirror of 5.5 mm thickness o etc., - 1 Each 760.33
Circular shape 450mm dia. (outer dimension)
152122 Providing and fixing mirror of 5.5 mm thickness o etc., - 1 Each 629.24
Rectangular shape 453x357mm (outer dimension)
152123 Providing and fixing mirror of 5.5 mm thickness o etc., - 1 Each 674.79
Oval shape 450x350mm (outer dimension)
152124 Providing and fixing mirror of 5.5 mm thickness o etc., - 1 Each 1330.26
Rectangular shape 1500x450 (outer dimension)
152130 Providing and fixing 600x120x5mm glass shelf with edges 1 Each 329.33
round or supported on anodised aluminium angle frame
with C.P. brass brackets and guard rail complete fixed
with 40mm long screws, rawl plugs etc. complete
SANITARY FITTINGS 1
Note : Sand cast iron S&S pipes shall not be used except 1
for minor work or due to non availability of centrifugally
cast (spun) iron S&S pipe.
153011 Providing and fixing soil, waste and vent pipes 1 metre 587.16
etc., - 100mm dia. Sand cast iron S&S pipe as per
IS:1729
153012 Providing and fixing soil, waste and vent pipes 1 metre 870.60
etc., - 100mm dia. Centrifugally cast (spun) iron S&S
pipe as per IS:3989
153013 Providing and fixing soil, waste and vent pipes 1 metre 514.97
etc., - 75mm dia. Sand cast iron S&S pipe as per IS:1729
153014 Providing and fixing soil, waste and vent pipes 1 metre 751.47
etc., - 75mm dia. Centrifugally cast (spun) iron S&S pipe
as per IS:3989
153020 Providing and filling the joints with spun yarn cement 1
slurry and cement mortar 1:2 (1cement:
2fine sand) in S.C.I./ C.I. pipes
153021 Providing and filling the joints with spun etc., - 75mm dia 1 Each 36.52
pipe
153022 Providing and filling the joints with spun etc., - 100mm dia 1 Each 43.02
pipe
153031 Providing and fixing M.S. holder-bat clamps etc., - For 1 Each 105.22
100mm dia pipe
153032 Providing and fixing M.S. holder-bat clamps etc., - For 1 Each 93.61
75mm dia pipe
153041 Providing and fixing bend of required degree with etc., - 1 Each 341.13
100mm dia. Sand cast iron S&S as per IS-1729
153042 Providing and fixing bend of required degree with etc., - 1 Each 588.53
100mm dia. Sand cast iron S&S as per IS-3989
153043 Providing and fixing bend of required degree with etc., - 1 Each 265.29
75mm dia. Sand cast iron S&S as per IS-1729
153044 Providing and fixing bend of required degree with etc., - 1 Each 476.68
75mm dia. Sand cast iron S&S as per IS-3989
153051 Providing and fixing plain bend of required degree etc., - 1 Each 276.09
100mm dia. Sand cast iron S&S as per IS-1729
153052 Providing and fixing plain bend of required degree etc., - 1 Each 442.18
100mm dia. Sand cast iron S&S as per IS-3989
153053 Providing and fixing plain bend of required degree etc., - 1 Each 237.41
75mm dia. Sand cast iron S&S as per IS-1729
153054 Providing and fixing plain bend of required degree etc., - 1 Each 372.14
75mm dia. Sand cast iron S&S as per IS-3989
153061 Providing and fixing heel rest sanitary bend 1 Each 303.62
etc., - 100mm dia. Sand cast iron S&S as per IS-1729
153062 Providing and fixing heel rest sanitary bend 1 Each 366.69
etc., - 100mm dia. Sand cast iron S&S as per IS-3989
153063 Providing and fixing heel rest sanitary bend 1 Each 260.64
etc., - 75mm dia. Sand cast iron S&S as per IS-1729
153064 Providing and fixing heel rest sanitary bend 1 Each 314.07
etc., - 75mm dia. Sand cast iron S&S as per IS-3989
153071 Providing and fixing double equal junction etc., - 1 Each 702.36
100x100x100x100mm sand cast iron S&S as per
IS-1729
153072 Providing and fixing double equal junction etc., - 1 Each 799.93
100x100x100x100mm Sand cast iron S&S as per
IS-3989
153073 Providing and fixing double equal junction etc., - 1 Each 524.30
75x75x75x75mm sand cast iron S&S as per IS-
1729
153074 Providing and fixing double equal junction etc., - 1 Each 625.35
75x75x75x75mm Sand cast iron S&S as per IS-
3989
153081 Providing and fixing double equal plain junction o etc., - 1 Each 615.25
100x100x100x100mm sand cast iron S&S as per
IS-1729
153082 Providing and fixing double equal plain junction o etc., - 1 Each 776.70
100x100x100x100mm Sand cast iron S&S as per
IS-3989
153083 Providing and fixing double equal plain junction o etc., - 1 Each 452.64
75x75x75x75mm sand cast iron S&S as per IS-
1729
153084 Providing and fixing double equal plain junction o etc., - 1 Each 568.79
75x75x75x75mm Sand cast iron S&S as per IS-
3989
153091 Providing and fixing single equal plain junction etc., - 1 Each 515.36
100x100x100mm sand cast iron S&S as per IS-
1729
153092 Providing and fixing single equal plain junction etc., - 1 Each 569.95
100x100x100mm Sand cast iron S&S as per IS-
3989
153093 Providing and fixing single equal plain junction etc., - 1 Each 364.01
75x75x75mm sand cast iron S&S as per IS-1729
153094 Providing and fixing single equal plain junction etc., - 1 Each 470.87
75x75x75mm Sand cast iron S&S as per IS-3989
153101 Providing and fixing single equal plain junction etc., - 1 Each 372.49
100x100x100mm sand cast iron S&S as per IS-
1729
153102 Providing and fixing single equal plain junction etc., - 1 Each 603.63
100x100x100mm Sand cast iron S&S as per IS-
3989
153103 Providing and fixing single equal plain junction etc., - 1 Each 290.84
75x75x75mm sand cast iron S&S as per IS-1729
153104 Providing and fixing single equal plain junction etc., - 1 Each 389.57
75x75x75mm Sand cast iron S&S as per IS-3989
153111 Providing and fixing double unequal junction etc., - 1 Each 722.10
100x100x75x75mm sand cast iron S&S as per IS-
1729
153112 Providing and fixing double unequal junction etc., - 1 Each 997.38
100x100x75x75mm Sand cast iron S&S as per IS-
3989
153122 Providing and fixing double unequal plain junction etc., - 1 Each 894.01
100x100x75x75mm Sand cast iron S&S as per IS-
1729
153131 Providing and fixing single unequal junction etc., - 1 Each 515.36
100x100x75mm sand cast iron S&S as per IS-1729
153132 Providing and fixing single unequal junction etc., - 1 Each 745.33
100x100x75mm Sand cast iron S&S as per IS-
3989
153141 Providing and fixing single unequal plain junction etc., - 1 Each 403.85
100x100x75mm sand cast iron S&S as per IS-1729
153142 Providing and fixing single unequal plain junction etc., - 1 Each 755.79
100x100x75mm Sand cast iron S&S as per IS-
3989
153151 Providing and fixing double equal plain inv etc., - 1 Each 650.09
100x100x100x100mm sand cast iron S&S as per
IS-1729
153152 Providing and fixing double equal plain inv etc., - 1 Each 689.58
100x100x100x100mm Sand cast iron S&S as per
IS-3989
153153 Providing and fixing double equal plain inv etc., - 1 Each 438.35
75x75x75x75mm sand cast iron S&S as per IS-
1729
153154 Providing and fixing double equal plain inv etc., - 1 Each 509.20
75x75x75x75mm Sand cast iron S&S as per IS-
3989
153161 Providing and fixing single equal plain inv etc., - 1 Each 452.29
100x100x100mm sand cast iron S&S as per IS-
1729
153162 Providing and fixing single equal plain inv etc., - 1 Each 453.45
100x100x100mm Sand cast iron S&S as per IS-
3989
153163 Providing and fixing single equal plain inv etc., - 1 Each 394.21
75x75x75mm sand cast iron S&S as per IS-1729
153164 Providing and fixing single equal plain inv etc., - 1 Each 382.60
75x75x75mm Sand cast iron S&S as per IS-3989
153171 Providing and fixing double unequal invert branch etc., - 1 Each 696.55
100x100x75x75mm sand cast iron S&S as per IS-
1729
153172 Providing and fixing double unequal invert branch etc., - 1 Each 871.94
100x100x75x75mm Sand cast iron S&S as per IS-
3989
153181 Providing and fixing single unequal plain in etc., - 1 Each 636.15
100x100x75mm sand cast iron S&S as per IS-1729
153182 Providing and fixing single unequal plain in etc., - 1 Each 658.22
100x100x75mm Sand cast iron S&S as per IS-
3989
153190 Providing and fixing sand cast iron S&S off sets as per IS- 1
1729
153191 Providing and fixing sand cast iron S&S off sets a etc., - 1 Each 199.08
76mm off sets with 75mm dia pipe
153192 Providing and fixing sand cast iron S&S off sets a etc., - 1 Each 368.66
76mm off sets with 100mm dia pipe
153193 Providing and fixing sand cast iron S&S off sets a etc., - 1 Each 368.66
114mm off sets with 75mm dia pipe
153194 Providing and fixing sand cast iron S&S off sets a etc., - 1 Each 442.18
114mm off sets with 100mm dia pipe
153195 Providing and fixing sand cast iron S&S off sets a etc., - 1 Each 434.31
152mm off set with 75mm dia pipe
153196 Providing and fixing sand cast iron S&S off sets a etc., - 1 Each 553.94
152mm off sets with 100mm dia pipe
153200 Providing and fixing Sand cast iron S&S off sets as per IS- 1
3989
153201 Providing and fixing Sand cast iron S&S off sets a etc., - 1 Each 296.65
75mm off sets with 75mm dia pipe
153202 Providing and fixing Sand cast iron S&S off sets a etc., - 1 Each 316.00
150mm off sets with 75mm dia pipe
153203 Providing and fixing Sand cast iron S&S off sets a etc., - 1 Each 475.12
150 mm off sets with 100mm dia pipe
153211 Providing and fixing door piece, insertion rubber etc., - 1 Each 464.25
100mm Sand cast iron S&S as per IS-1729
153212 Providing and fixing door piece, insertion rubber etc., - 1 Each 399.21
100mm Sand cast iron S&S as per IS-3989
153213 Providing and fixing door piece, insertion rubber etc., - 1 Each 347.75
75mm Sand cast iron S&S as per IS-1729
153214 Providing and fixing door piece, insertion rubber etc., - 1 Each 267.61
75mm Sand cast iron S&S as per IS-3989
153215 Providing and fixing door piece, insertion rubber etc., - 1 Each 252.63
50mm Sand cast iron S&S as per IS-1729
153216 Providing and fixing door piece, insertion rubber etc., - 50 1 Each 194.55
mm Sand cast iron S&S as per IS-3989
153231 Supplying, fitting and fixing cowls to vent pipes etc., - Wire 1 Each 70.27
cowls for pipes of size 50/75 mm dia.
153232 Supplying, fitting and fixing cowls to vent pipes etc., - Wire 1 Each 100.47
cowls for pipes of size 100/150 mm dia.
153251 Providing lead caulked joints to sand cast iron/ etc., - 1 Each 157.85
100mm
153252 Providing lead caulked joints to sand cast iron/ etc., - 1 Each 133.81
75mm
153253 Providing lead caulked joints to sand cast iron/ etc., - 1 Each 107.32
50mm
153260 Providing and fixing M.S. stays and clamps for sand cast 1
iron/ centrifugally cast (spun) iron pipes of diameter
153261 Providing and fixing M.S. stays and clamps etc., - 100mm 1 Each 48.43
153262 Providing and fixing M.S. stays and clamps etc., - 75mm 1 Each 48.09
153263 Providing and fixing M.S. stays and clamps etc., - 50mm 1 Each 39.20
153271 Providing and fixing trap of self cleansing desig etc., - 1 Each 720.19
100mm inlet and 100mm outlet Sand cast iron
S&S as per IS: 3989
153272 Providing and fixing trap of self cleansing desig etc., - 1 Each 565.71
100mm inlet and 100mm outlet sand cast iron S&S
as per IS:1729
153273 Providing and fixing trap of self cleansing desig etc., - 1 Each 667.92
100mm inlet and 75mm outlet Sand cast iron S&S
as per IS: 3989
153274 Providing and fixing trap of self cleansing desig etc., - 1 Each 511.12
100mm inlet and 75mm outlet sand cast iron S&S
as per IS:1729
153281 Providing and fixing Poly Tetra Methyle etc., - Waste 1 Each 74.50
coupling 31mm of 79mm length and 62mm breadth
weighing not less than 45gms
153282 Providing and fixing Poly Tetra Methyle etc., - Waste 1 Each 103.54
coupling 38mm of 83mm length and 77mm breadth,
weighing not less than 60gms
153290 Providing and fixing PTMT Bottle Trap for Wash basin and 1
sink
153291 Providing and fixing PTMT Bottle Trap for Wash ba etc., - 1 Each 437.89
Bottle trap 31mm single piece moulded with height of
270mm, effective length of tail pipe 250mm from the
centre of the waste coupling 77mm breadth with 25mm
minimum water seal, weighing not less than 270gms
153292 Providing and fixing PTMT Bottle Trap for Wash ba etc., - 1 Each 475.63
Bottle trap 38mm single piece moulded with height of
270mm, effective length of tail pipe 265mm from the
centre of the waste coupling 77mm breadth with 25mm
minimum water seal, weighing not less than 270gms
153300 Providing and fixing PTMT liquid soap container 1 Each 217.20
109mm wide, 125mm high and 112mm distance from wall
of standard shape with bracket of the same materials/ with
snap fittings of approved quality colour and make,
weighing not less than
105gms
153310 Providing and fixing PTMT towel ring trapezoidal shape 1 Each 192.81
215mm long, 200mm width with a minimum distance of
37mm from wall face with concealed fittings arrangement
of approved quality, colour and make weighing not less
than 90gms
153322 Providing and fixing PTMT towel rail complete with etc., - 1 Each 435.84
600mm long towel rail with total length of 645mm, width
78mm and effective height of 88mm, weighing not less
than 190gms
153330 Providing and fixing PTMT shelf 440mm long, 1 Each 488.11
124mm width and 36mm height of approved quality,
colour and make weighing not less than
300gms
153340 Providing and fixing PTMT 15mm Urinal spreader size 1 Each 187.93
95x69x100mm with ½ Inch BSP thread and shapes as per
BIS specifications, weighing not less than 60gms
153350 Providing and fixing PTMT urinal cock 15mm nominal size 1 Each 147.55
80mm long, 42mm high and 30mm wide with BSP female
threads weighing not less than 48 gms. of approved
quality, colour and make
153360 Providing and fixing PTMT shower rose of approved 1 Each 117.35
quality with 15mm or 20mm inlet. 100mm dia.
153370 Providing and fixing PTMT shower rose of approved 1 Each 163.81
quality with 15mm or 20mm inlet. 150 mm dia.
153380 Providing and fixing C P brass Soap dish holder having 1 Each 186.31
length of 138 mm, 102 mm wide, 75 mm high with
concealed fittings arrangements weighing approx. 110
gms
153390 Providing and fixing Shower rose (C.P.) brass with swivel 1 Each 304.22
joint having aprox. wt. 270 gm
153400 Providing and fixing Towel rail (C.P.) brass 15 mm dia x 1 Each 338.68
450 mm long having approx. wt. 380 gm
153410 Providing and fixing Towel rail (C.P.)brass15 mm dia x 600 1 Each 385.14
mm long having approx. wt.500 gm
153420 Providing and fixing C P brass Towel ring in trapezoidal 1 Each 127.47
shape having length of 215 mm, width
200 mm, minimum distance from wall 37 mm with
concealed fittings arrangements weighing approx.
90 gms
153430 Providing and fixing C P brass Shelf of 450 mm length 1 Each 668.73
complete with glass, 124 mm width & 36 mm ht. having
approx. wt. 300 gms (Without Glass)
153440 Providing and fixing C P brass Bottle trap 31 mm, single 1 Each 456.75
piece moulded of ht. 270 mm, effective length of tall pipe
from centre of waste coupling
260 mm, 77 mm breadth water seal of minimum
25 mm, weighing approx. 260 gms
153450 Providing and fixing C P brass Shower arm 15 mm size 1 Each 120.84
with 15 mm (1/2") B.S.P. threads, 195 mm long with a
bend of 45 (effective length of 210 mm) provided with a
flange of 56 mm dia and having approx. wt. of 40 gms
153471 Providing and fixing C P brass grating wit etc., - Grating 1 Each 109.85
100 mm nominal dia. and 12 mm. high domed shape
having wt. not less than 25 gms
153472 Providing and fixing C P brass grating wit etc., - Grating 1 Each 134.24
125 mm nominal dia. and 15 mm. high domed shape
having wt. not less than 40 gms
153491 Providing and fixing PVC connector 15 mm size wit etc., - 1 Each 54.98
15mm dia 300mm long
153492 Providing and fixing PVC connector 15 mm size wit etc., - 1 Each 66.59
15mm dia 450mm long
153493 Providing and fixing PVC connector 15 mm size wit etc., - 1 Each 84.02
15mm dia 600mm long
153500 Providing and fixing Swan neck pillar tap (C.P. Brass) 15 1 Each 438.55
mm dia. with swinging spout having approx. wt. 1000 gms
153510 Providing and fixing Telephonic shower (C.P. Brass) 100 1 Each 336.06
mm dia with flexible PVC tube 1.5m long including C.P.
hook
153520 Providing and fixing Shower arm (C.P. Brass) 15 mm dia. 1 Each 129.99
x 225 mm long
153531 Providing and fixing Basin/sink waste (C.P. Brass) etc., - 1 Each 132.22
a) Waste 32 mm
153532 Providing and fixing Basin/sink waste (C.P. Brass) etc., - 1 Each 147.32
b) Waste 40 mm
153540 Providing and fixing Liquid soap container (C.P. Brass) 1 Each 228.12
having approx wt. 240 gms
153550 Providing and fixing Toilet paper holder (C.P. Brass) 1 Each 127.07
having approx. wt. 250 gm
153560 Providing and fixing Coat hook "J" type two way 1 Each 58.12
(C.P.Brass)
153570 Providing and fixing Soap dish (C.P. Brass) having 1 Each 181.24
approx. wt. 220 gm
153580 Supplying and fixing half round white glazed earthen ware 1 metre 195.61
drains 100 mm dia with cement sand mortar 1:3 mix and
joints grouted with neat cement slurry of the matching
colour :
153590 Supplying and fixing half round white glazed earthen ware 1 metre 240.51
drains 150 mm dia with cement sand mortar 1:3 mix and
joints grouted with neat cement slurry of the matching
colour
153600 Extra if coloured half round drains are provided in lieu of 1 metre 28.75
white glazed half round drains with cement sand mortar
1:3 mix and joints grouted with neat cement slurry of the
matching colour over item
153580 & 153590
153610 Providing and fixing 20mm diameter puff pipe, complete 1 Each 120.83
with brass perforated cap
153620 Providing and fixing 25mm diameter puff pipe, complete 1 Each 134.77
with brass perforated cap
153630 Providing and fixing S.C.I. trap with 10 cm inlet and 10 cm 1 Each 490.21
outlet of self cleansing design with S.C.I. screwed down or
hinged grating with or without vent arm complete,
including cost of cutting and making good the walls and
floors
153640 Providing and fixing 10 cm inlet and 5 cm outlet S.C.I. 1 Each 490.21
floor trap of self cleansing design with S.C.I. screwed
down or hinged grating with or without vent arm complete,
including cost of cutting and making good the walls and
floors
154030 Providing and fixing 110 mm x 110 mm x 110mm dia PVC 1 Each 166.94
plain branch (single equal junction)of the required degree
including jointing and cost of spun yarn and sand etc.,
complete
154040 Providing and fixing 110 mm x 110 mm x 110mm dia PVC 1 Each 180.33
plain branch (single equal junction)of the required degree
with access door inclusive of 3mm thick bitumastic felt
washer and bolts and nuts, complete, including jointing
and the cost of spun yarn and sand etc., complete
154050 Providing and fixing 110 mm x 110 mm x 110mm x 110 1 Each 205.31
mm PVC plain branch (double equal junction)of the
required degree including jointing and cost of spun yarn
and sand etc., complete
154060 Providing and fixing 110 mm x 110 mm x 110mm dia PVC 1 Each 216.34
plain branch (double equal junction) of the required
degree with access door inclusive of 3mm thick bitumastic
felt washer and bolts and nuts, complete, including
jointing and cost of spun yarn and sand etc., complete
154070 Providing and fixing 110 mm x 110 mm x 5mm PVC plain 1 Each 105.82
branch (single unequal junction) of the required degree
with access door inclusive of 3mm thick bitumastic felt
washer and bolts and nuts, complete, including jointing
and cost of spun yarn and sand etc., complete
154091 Providing and fixing 110 mm PVC offset including j etc., - 1 Each 82.15
(a) With 10 cm projection
154092 Providing and fixing 110 mm PVC offset including j etc., - 1 Each 82.15
(b) With 15 cm projection
154093 Providing and fixing 110 mm PVC offset including j etc., - 1 Each 126.29
(c) With 30 cm projection
154100 Providing and fixing 110 mm PVC Plain bend of the 1 Each 97.29
required degree with access door inclusive of 3mm thick
bitumastic felt washer, bolts and nuts, complete, including
jointing and cost of spun yarn and sand etc. complete
154110 Providing and fixing 110 mm PVC bend of the required 1 Each 134.46
degree with access door inclusive of 3mm thick bitumastic
felt washer, bolts and nuts, complete, including jointing
and cost of spun yarn and sand etc. complete
154120 Providing and fixing 110mm dia PVC terminal guard 1 Each 229.98
including jointing and cost of spun yarn and sand etc,
complete
154130 Providing and fixing 110 mm PVC collar (loose socket) 1 Each 76.66
including jointing and cost of spun yarn and sand etc.
complete
154140 Providing and fixing 75 mm PVC soil, waste and vent 1 metre 140.19
pipes including jointing and cost of spun yarn and sand
etc., complete
154170 Providing and fixing 75mm x 75 mm x 75mm dia PVC 1 Each 85.02
branch (single equal junction) of the required degree with
access door inclusive of 3mm thick bitumastic felt washer
including jointing and cost of spun yarn and sand etc.,
complete
154201 Providing and fixing 75 mm dia PVC offset etc., - With 5 1 Each 54.28
cm projection
154202 Providing and fixing 75 mm dia PVC offset etc., - With 10 1 Each 54.28
cm projection
154203 Providing and fixing 75 mm dia PVC offset etc., - With 15 1 Each 54.28
cm projection
154204 Providing and fixing 75 mm dia PVC offset etc., - With 30 1 Each 54.28
cm projection
154210 Providing and fixing 8cm dia PVC Plain bend of the 1 Each 64.73
required degree including jointing and cost of spun yarn
and sand etc. complete
154220 Providing and fixing 8 cm PVC bend of the required 1 Each 74.06
degree with access door inclusive of 3mm thick bitumastic
felt washer, bolts and nuts, complete, including jointing
and cost of spun yarn and sand etc. complete
154230 Providing and fixing 75mm dia PVC terminal guard 1 Each 25.27
including jointing and cost of spun yarn and sand etc,
complete
154240 Providing and fixing 75 mm PVC collar (loose socket) 1 Each 47.34
including jointing and cost of spun yarn and sand etc.
complete
LEAD PIPES 1
155010 Providing and fixing 32mm diameter lead pipe 1 metre 276.94
155020 Providing wiped solder joint to 32mm dia, lead pipe and 1 Each 260.06
fittings including cost of jointing materials
155030 providing and fixing with porcelain / white vitreous china 1 Each 436.67
/coloured interconnection for flush pipe connection with
WC pan (for low down
155040 Supplying 32 mm dia telescopic plastic flush pipe with 1 Each 128.96
unions etc.
155051 Supplying and fixing marble stone 20 to 25 mm thi etc., - 1 Sqm 1234.08
Makrana chalk doongri
155052 Supplying and fixing marble stone 20 to 25 mm thi etc., - 1 Sqm 1466.38
Makrana Dhobi doongri
155053 Supplying and fixing marble stone 20 to 25 mm thi etc., - 1 Sqm 1117.93
Black Zebra Kishangarh
155054 Supplying and fixing marble stone 20 to 25 mm thi etc., - 1 Sqm 1176.01
Bundi or Baroda green marble
155060 Supplying and fixing pipe as outlet or waste pipe to wash 1
basins sink and bowl type urinals etc. complete including
providing clamps to hold the pipe, making holes in
masonry and making it good to original condition when not
included in the item
155061 Supplying and fixing pipe as outlet or waste pipe etc., - 50 1 metre 262.88
mm bore (2.90 mm thick and 4.18 Kg/metre weight
minimum) M.S. galvanized for bowl urinals and sinks, etc.
155062 Supplying and fixing pipe as outlet or waste pipe etc., - 32 1 metre 176.78
mm bore ( 2.65 mm thick and 2.61 Kg/metre weight
minimum) M.S. galvanized for wash basin etc.
155063 Supplying and fixing pipe as outlet or waste pipe etc., - 1 metre 102.10
PVC 50 mm bore 1.7 mm thick
155064 Supplying and fixing pipe as outlet or waste pipe etc., - 1 metre 77.70
PVC 32 mm bore 1.4 mm thick
155070 Supplying and fixing granite stone superior quality black 1 Sqm 2016.97
20 to 25mm thick in masonry or concrete as a Purdah to
urinal range etc. stone to be machine cut & well polished
on all faces and the edges to be moulded by semi-circular
rounding and polishing. NOTE : The following percentage
is to be added / deducted incase of granites other than
superior quality black. i) For superior quality Red like
“RBI” red add 15% extra ii) For pink coloured granite
deduct 25% iii) For gray coloured granite deduct
18%
155080 Supplying and fixing cast iron brackets in walls for fixing 1 Pair 133.07
flushing cistern, including making holes in masonry and
making good the surface to its original condition. (When
ordered separately)
155090 Providing and fixing aluminium drain boards 600 x 1 Each 586.87
450 mm
155101 Providing and fixing Aluminium anodized towel rail etc., - 1 Each 308.11
a) 750 x 20 mm dia
155102 Providing and fixing Aluminium anodized towel rail etc., - 1 Each 250.03
b) 600 x 20 mm dia
155110 Providing and fixing brass robe hook swinging type with 3 1 Each 61.87
hooks as approved by Engineer-in-charge
155120 Providing and fixing air purifier container of anodized 1 Each 75.81
aluminium with brackets
155141 Providing and fixing Chromium plated brass waste p etc., 1 Each 64.75
- 32 mm
155142 Providing and fixing Chromium plated brass waste p etc., 1 Each 64.75
- 40 mm
155143 Providing and fixing Chromium plated brass waste p etc., 1 Each 75.21
- 50 mm
155151 Providing and fixing rubber or vulcanite waste plu etc., - 1 Each 46.17
32 mm
155152 Providing and fixing rubber or vulcanite waste plu etc., - 1 Each 48.49
40 mm
155153 Providing and fixing rubber or vulcanite waste plu etc., - 1 Each 53.14
50 mm
155161 Supplying fitting and fixing float valve for ciste etc., - 15 1 Each 304.43
mm dia set
155162 Supplying fitting and fixing float valve for ciste etc., - 1 Each 426.39
20mm dia set
155170 Providing and fixing Towel ring (C.P.) of approved make 1 Each 208.19
170 mm dia having approx. weight 490 gm
155180 Providing and fixing Connector (C.P.) with coupling 1 Each 175.57
15 mm x 450 mm long
155190 Providing and fixing Connector (C.P.) with coupling 1 Each 205.77
15 mm x 600 mm long
155200 Providing and fixing Flush valve (C.P.) 25 mm with 1 Each 220.21
25 mm size control cock having approx. wieght
2.75 kg conforming to I.S. 9758:1981
155210 Providing and fixing Flush valve (C.P.) 32 mm with elbow 1 Each 259.12
set ISI marked (IS : 9758 : 1981)
155220 Providing and fixing Glass Shelf of approved make or 1 Each 634.38
equivalent of size 550 mm x 130 mm x 5.5 mm thick
(rounded end) with C.P. brass brackets & guard rails
having approx. wt.2.4 kg
155230 Supplying fitting and fixing soap tray of size150x150mm 1 Each 176.63
vitreous (concealed type) with all necessary fittings etc.
completed as directed by the Engineer-incharge
155240 Supplying and fixing approved quality chromium plated 1 Each 91.30
shirt hooks (One unit of 4 hooks) with all necessary fittings
etc. complete and as directed by the Engineer-in-charge
155250 P&F 127mm dia C.P. steel Jali cockroach trap 1 Each 250.39
(CCTR-127) for gully floor or Nahani trap
155260 Supplying and fixing 150 mmx150mm HCI / CI Tee for 1 Each 567.21
septic tank as a complete job
MISCELLANEOUS 1
156011 Cutting chases in brick masonry walls for followin etc., - 1 metre 156.91
100mm dia.
156012 Cutting chases in brick masonry walls for followin etc., - 1 metre 112.19
75mm dia.
156013 Cutting chases in brick masonry walls for followin etc., - 1 metre 72.53
50mm dia.
156020 Painting two or more coats, C.I. cistern with bitumastic or 1 Each 303.13
any other anti-corrosive paint inside and white/approved
colour , paint over a coat of zinc chromate yellow primer
(of approved quality) on the outside surface of the cistern,
flush pipe, other fittings etc. to give an even shade
complete for new work
156030 Re-painting one or more coats ,C.I. cistern with bitumastic 1 Each 205.09
or any other anti-corrosive paint inside and
white/approved colour, paint on the outside surface of the
cistern, flush pipe, other fittings etc. complete including
polishing of wooden seat and lid to give an even shade
and cleaning of W.C. pan with acid wherever necessary
156040 Re-painting C.I. one or more coats, cistern with synthetic 1 Each 87.92
enamel paint of approved colour brand and manufacture
on the outside surface of cistern flush pipe, other fittings
etc. to give an even shade complete
156051 Painting two or more coats on , sand cast iron/ c etc., - 1 metre 24.91
100mm diameter pipe
156052 Painting two or more coats on , sand cast iron/ c etc., - 1 metre 18.99
Upto 75mm diameter pipe
156061 Re-painting one or more coats sand cast iro etc., - 100mm 1 metre 12.06
diameter pipe
156062 Re-painting one or more coats sand cast iro etc., - Upto 1 metre 9.03
75mm diameter pipe
156070 Repainting bath tub of size 1700x730x430mm (or of any 1 Each 239.19
other size ) with enamel paint one or more coats to give
an even shade
157010
157020
157030
157040
157050
157060
157070
157080
157090
157100
CHAPTER - 16 : HORTICULTURE AND
LANDSCAPING
161010 Trenching in ordinary soil upto a depth of 60cm including 1 cum 78.29
removal and stacking of un-serviceable materials and
then disposing of by spreading and neatly leveling with in
a lead of 50m and making up the trenched area to proper
levels by filling with earth or earth mixed with sludge or/
and manure before and after flooding trench with water
(excluding cost of imported earth, sludge or manure).
(Additional lead, if any will be paid as per rates in the
Earth work Chapter)
161020 Supplying and stacking of good earth at site including 1 cum 241.75
royalty
(earth measured in stacks will be reduced by 20% for
payment)
161030 Supplying and stacking sludge at site in dry caked form 1 cum 447.18
from approved disposal works including royalty & all lead
and lift etc. (sludge measured in stacks will be reduced by
8% for payment)
161041 Supplying and stacking at site dump manure / farm etc., - 1 cum 105.25
Screened through sieve of I.S. designation 20mm
161042 Supplying and stacking at site dump manure / farm etc., - 1 cum 124.92
Screened through sieve of I.S. designation 4.75mm
161060 Rough dressing the trenched ground including breaking 100 Sqm 45.38
clods
161070 Uprooting weeds from the trenched area after 10 to 100 Sqm 147.44
15days of its flooding with water including disposal of
uprooted vegetation
161090 Spreading of sludge, dump manure/ farm manure/animal 100 Sqm 15.91
dung manure and good earth in required thickness (cost
of sludge, dump manure/farm manure or/ and good earth
to be paid separately)
161100 Mixing earth and sludge or manure in proportion specified 1 cum 10.93
or directed. (Net total quantity of earth, sludge or manure
after deduction of voids to be cosidered for payment)
161111 Supplying & Grassing with grass in rows 7.5cm apar etc., 100 Sqm 327.39
- Doob Grass
161112 Supplying & Grassing with grass in rows 7.5cm apar etc., 100 Sqm 362.24
- Calcutta Grass
161113 Supplying & Grassing with grass in rows 7.5cm apar etc., 100 Sqm 408.70
- Mexican Grass
161114 Supplying & Grassing with grass in rows 7.5cm apar etc., 100 Sqm 402.89
- Korean carpet grass
161115 Supplying & Grassing with grass in rows 7.5cm apar etc., 100 Sqm 710.69
- Selection No.1 (Grass)
161116 Supplying & Grassing with grass in rows 7.5cm apar etc., 100 Sqm 232.65
- Extra over item 161110 for grassing in rows at 5cm apart
instead of 7.50 cm apart in either direction
161120 Renovating lawns including weeding, cheeling the grass, 100 Sqm 1030.56
forking the ground, top dressing with sludge or manure,
mixing the same with forked soil, watering and
maintaining the lawn for 30 days or more till the grass
forms a thick lawn free from weeds and fit for mowing and
disposal of rubbish as directed, including supplying good
earth, sludge
or manure, if needed (cost of sludge/manure & good earth
to be paid separately)
161130 Uprooting rank vegetation and weeds by digging the area 100 Sqm 1828.68
to a depth of 60cm removing all weeds and other growth
with roots by forking repeatedly, breaking clods, rough
dressing, flooding with water, uprooting fresh growths
after 10 to 15days and then fine dressing for planting new
grass, including disposal of all rubbish with all leads and
lifts
161150 Digging holes in ordinary soil and refilling the same with 1
the excavated earth mixed with manure or sludge in the
ratio 2:1 by volume (2parts of stacked volume of earth
after reduction by
20% : 1part of stacked volume of manure after reduction
by 8%) flooding with water, dressing including removal of
rubbish and surplus earth, if any with all leads and lifts
(cost of manure, sludge or extra good earth if needed to
be paid for separately)
161151 Digging holes in ordinary soil and refilling the s etc., - 1 Each 221.37
Holes / pits 1.2m dia and 1.2m deep
161152 Digging holes in ordinary soil and refilling the s etc., - 1 Each 32.63
Holes/pits 60cm dia. and 60cm deep
161153 Digging holes in ordinary soil and refilling the s etc., - 1 Each 16.71
Holes / Pits 45 cm Dia and 60 cm deep
161161 Half brick circular tree guard in 5.0/7.5 class de etc., - (a) 1 Each 632.79
With F.P.S. bricks 5.0 class designation
161162 Half brick circular tree guard in 5.0/7.5 class de etc., - (a) 1 Each 873.22
With F.P.S. bricks 7.5 class designation
161170 Providing and fixing M.S. flat iron tree guard 60cm dia. 1 Each 2160.45
And 2m height above ground level formed of 4Nos.
25x6mm and 8Nos.
25x3mm vertical M.S. flat riveted to 3Nos. 25x6mm M.S.
flat iron rings in two halves, bolted together with 8mm dia
and 30mm long bolts including painting two coats with
paint of approved brand and manufacture over a coat of
priming, complete in all respects
161180 Providing and Making tree guard 53cm dia and 1.3m high
as per design from contractor's own empty coal tar drums
including providing and fixing 2 Nos. M.S. sheet rings
50x0.5mm with rivets complete in all respects including
painting inside and outside of tree guard with :
161181 Providing and Making tree guard 53cm dia and 1.3m etc., 1 Each 262.03
- A coat of cal tar
161182 Providing and Making tree guard 53cm dia and 1.3m etc., 1 Each 358.82
- Two or more coats of ready mixed paint of approved
quality shade over a priming coat
161190 Providing and Making tree guard 53cm dia and 2m high 1
as per
design from contractor's own empty coal tar drums
including providing and fixing four legs 40cm long of
30x3mm M.S. flat riveted to tree guard and providing and
fixing 2Nos. M.S. sheet rings 50x0.5mm with rivets
complete in all respects including painting inside and
outside of tree guard with :
161191 Providing and Making tree guard 53cm dia and 2m h etc., 1 Each 416.09
- A coat of cal tar
161192 Providing and Making tree guard 53cm dia and 2m h etc., 1 Each 565.30
- Two or more coats of ready mixed paint of approved
quality shade over a priming coat
161200 Edging with bricks (Along Kiaris, lawns or hedges etc) laid 1
dry including excavation, refilling, consolidating with hand
packing and spreading neatly, surplus earth within a lead
of 50metres
161201 Edging with bricks (Along Kiaris, lawns or hedges etc., - 1 metre 19.84
7.5 class designation, F.P.S. bricks laid length wise
161202 Edging with bricks (Along Kiaris, lawns or hedges etc., - 1 metre 14.62
5.0 class designation, F.P.S. bricks Laid length wise
161203 Edging with bricks (Along Kiaris, lawns or hedges etc., - 1 metre 27.74
7.5 class designation, F.P.S. bricks, laid in tooth edged
pattern at an angle of 60 degree with horizontal
161204 Edging with bricks (Along Kiaris, lawns or hedges etc., - 1 metre 19.90
5.0 class designation, F.P.S. bricks laid in tooth edged
pattern at an angle of 60 degree with horizontal
161210 Filling mixture of earth and sludge or manure in the 1 cum 18.22
desired proportion in trenches, flooding with water and
levelling (cost of supplying earth and sludge or manure
and mixing excluded). (Payment for only net quantity of all
the ingredients will be done)
161230 Flooding the ground with water including making kiaries 100 Sqm 78.84
and dismantling the same.
161240 Cutting, trimming and pruning, hedging of all types into 1 Sqm 3.57
proper shape & line as directed by Engineer In-charge
including the removal and disposal of the cut materials.
(Measurement shall be of the total area of faces and top
of the hedging, which has been trimmed).
161460 Sowing and maintaining for a month of flower seeds 1 Sqm per month 47.71
including preparation of surface & watering, as required
and manuring, nursing & removing grasses etc, from date
of sowing (maintenance as required or as directed by
engineer-in-charge)
161481 Maintenance of lawn, shrubs, hedge, trees e etc., - Lawn 10 sqm 26.29
/month
161483 Maintenance of lawn, shrubs, hedge, trees e etc., - Hedge 1 metre/month 18.29
161484 Maintenance of lawn, shrubs, hedge, trees e etc., - Tree 1 Each/month 21.01
161485 Maintenance of lawn, shrubs, hedge, trees e etc., - 1 Sqm/ month 29.02
Shrubbery borders (group plantation)
161540 Supply & Fixing grass tiles of grass selections No.1 or 1 Sqm 122.60
Mexican healthy and fresh grass free from weeds of 1’ X
1’ or bigger size tiles as required by engineer-in-charge
161550 Filling the earthen pots with good planting soil mixed with 1
25% manure including planting the sapling, watering &
maintaining the pots for 3 months. The rate excludes pot,
soil, manure & plants. Condition of the plant will be
inspected at end of every month and suitable penalty
imposed if the plant is not being maintained properly. The
payment will be released @25% per month and balance
will be paid after completion of three months. No penalty
will be imposed if the blooming period is over and plant
dies being seasonal in nature. The top dia will be
measured from inside and the bottom dia and ht from
outside Tolerance is
+/- 1.5. cm
161551 Filling the earthen pots with good planting soil m etc., - 1 Each/month 103.03
Height 15 cm, Upper dia 15cm & bottom dia 10 cm
161552 Filling the earthen pots with good planting soil m etc., - 1 Each/ 125.31
Height 20 cm, Upper dia 20cm & bottom dia 12 cm month
161553 Filling the earthen pots with good planting soil m etc., - 1 Each/month 106.25
Height 25 cm, Upper dia 25cm & bottom dia 15 cm
161554 Filling the earthen pots with good planting soil m etc., - 1 Each/ 107.86
Height 30 cm, Upper dia 30cm & bottom dia 20 cm month
161555 Filling the earthen pots with good planting soil m etc., - 1 Each/month 109.47
Height 45 cm, Upper dia 45cm & bottom dia 30 cm
161560 Filling cement sand/ stone sand pots with good planting 1
soil mixed with 25% manure including planting the sapling
and watering & maintaining the pots for a period of 3
months. The rate excludes pots, soil, manure, plant. The
top dia will be measured from inside and the bottom dia
and ht from outside. Tolerance is +/- 1.5 cm
161561 Filling cement sand/ stone sand pots with good etc., - 1 Each/month 104.12
Height 15 cm, Upper dia 15cm & bottom dia 10 cm
161562 Filling cement sand/ stone sand pots with good etc., - 1 Each/ 105.73
Height 20 cm, Upper dia 20cm & bottom dia 12 cm month
161563 Filling cement sand/ stone sand pots with good etc., - 1 Each/month 107.34
Height 25 cm, Upper dia 25cm & bottom dia 15 cm
161564 Filling cement sand/ stone sand pots with good etc., - 1 Each/ 109.47
Height 30 cm, Upper dia 30cm & bottom dia 20 cm month
161565 Filling cement sand/ stone sand pots with good etc., - 1 Each/month 111.08
Height 45 cm, Upper dia 45cm & bottom dia 30 cm
161570 Filling of polythene bags with earth, manure etc. as per 100 bags 213.25
instructions & directions of officer in charge and plantation
of cutting/sowing of seeds/seedlings in polythene bags
incl. all labour, T&P etc. But excluding the cost of
polybags, earth, manure and seed/ seedling/ cutting
complete as per direction of Officer in charge
161580 Laying of grass turf in proper level including scrapping of 1 Sqm 54.73
grass from the given site in turfs size 1x1 ft. approx. or
desired size, transportation at site, watering, rolling,
mowing, weeding and maintenance of the lawn upto a
period of one month from the date of turfing as per
direction of Officer in charge, with all labour, tools, and
tackles complete. 50% payment after laying and 50% after
one month
161590 Landscaping and making mounds and giving shape as 1 Sqm 27.34
per the requirements (Area to be measured from bottom
of mound)
161600 Supply and planting of edge plants including cost of 1 Each/year 177.59
plants, transportation, labour, T&P etc. complete and
maintenance for a period of one year from the date of
plantation as per direction of O.I.C. (Mode of payment:-
25% payment will be made after planting, 25% after six
months, 25% after nine months and rest
25% after one year)
161611 Maintenance of rose flower bed by doing all etc., - A) 1 Sqm/ 9.66
Rose bed upto 2000 Sqm area at a place month
161612 Maintenance of rose flower bed by doing all etc., - B) 1 Sqm/ 7.24
Rose bed above 2000 Sqm area at a place month
161640 Pruning / trimming of unwanted branches of trees and its 1 Each 43.78
disposal up to 100 mtr to the area identified by the officer
in charge - Trees up to 2 mtr. Height (average)
161650 Pruning / trimming of unwanted branches of trees and its 1 Each 65.69
disposal up to 100 mtr to the area identified by the officer
in charge - Trees above 2 mtr. Height (average)
161660 Supplying of all types & different varieties of seasonal 1 Packet 87.40
(Summer, rainy and winter) flowers and vegetable seeds
packets of 10 gms each of reputed company of national
brands
161681 Coloring of Earthen Pots with Water-proofing Paint etc., - 1 Each 3.07
Height 15 cm, Upper dia 15cm & bottom dia 10 cm
161682 Coloring of Earthen Pots with Water-proofing Paint etc., - 1 Each 4.12
Height 20 cm, Upper dia 20cm & bottom dia 12 cm
161683 Coloring of Earthen Pots with Water-proofing Paint etc., - 1 Each 5.50
Height 25 cm, Upper dia 25cm & bottom dia 15 cm
161684 Coloring of Earthen Pots with Water-proofing Paint etc., - 1 Each 7.09
Height 30 cm, Upper dia 30cm & bottom dia 20 cm
161685 Coloring of Earthen Pots with Water-proofing Paint etc., - 1 Each 8.79
Height 45 cm, Upper dia 45cm & bottom dia 30 cm
161702 Supply of cement pot at site as per direction of o etc., - 1 Each 46.47
Height 20 cm, Upper dia 20cm & bottom dia 12 cm
161703 Supply of cement pot at site as per direction of o etc., - 1 Each 69.70
Height 25 cm, Upper dia 25cm & bottom dia 15 cm
161704 Supply of cement pot at site as per direction of o etc., - 1 Each 116.16
Height 30 cm, Upper dia 30cm & bottom dia 20 cm
161705 Supply of cement pot at site as per direction of o etc., - 1 Each 174.24
Height 45 cm, Upper dia 45cm & bottom dia 30 cm
161711 Supply of earthen pot at site as per direction of etc., - 1 Each 17.43
Height 15 cm, Upper dia 15cm & bottom dia 10 cm
161712 Supply of earthen pot at site as per direction of etc., - 1 Each 23.24
Height 20 cm, Upper dia 20cm & bottom dia 12 cm
161713 Supply of earthen pot at site as per direction of etc., - 1 Each 34.86
Height 25 cm, Upper dia 25cm & bottom dia 15 cm
161714 Supply of earthen pot at site as per direction of etc., - 1 Each 52.28
Height 30 cm, Upper dia 30cm & bottom dia 20 cm
161715 Supply of earthen pot at site as per direction of etc., - 1 Each 63.89
Height 45 cm, Upper dia 45cm & bottom dia 30 cm
161721 Supply of Hanging Basket (G.I wire plastic coated) etc., - 1 Each 64.00
Height 15 cm, Upper dia 15cm & bottom dia 10 cm
161722 Supply of Hanging Basket (G.I wire plastic coated) etc., - 1 Each 75.61
Height 20 cm, Upper dia 20cm & bottom dia 12 cm
161723 Supply of Hanging Basket (G.I wire plastic coated) etc., - 1 Each 87.23
Height 25 cm, Upper dia 25cm & bottom dia 15 cm
161724 Supply of Hanging Basket (G.I wire plastic coated) etc., - 1 Each 104.65
Height 30 cm, Upper dia 30cm & bottom dia 20 cm
161725 Supply of Hanging Basket (G.I wire plastic coated) etc., - 1 Each 127.88
Height 45 cm, Upper dia 45cm & bottom dia 30 cm
161800 Supply of Insecticide/Pesticide 1
161900 WEEDICIDE 1
162000 Supply of Moss grass stick made of sup. quality PVC pipe 1 Each 87.34
20mm dia & 4’ long covered around with thick layer of
moss grass with chicken wire mesh / synthetic mesh
162030 Supply of polythene bags 100 micron for raising plants as 1 Kg 58.19
per direction officer incharge
162040 Supply of HDPE - plastic agro shading net : color 1 Sqm 34.96
green/white/black Shade 5-50%- 60%- 75% and Width 3
m
162083 Delonix regia (Gulmohar) of height 135-150 c etc., - Ficus 1 Each 175.39
benjmina (green of height 120-135 cm in big polybag size
25-30cm
162084 Delonix regia (Gulmohar) of height 135-150 c etc., - Ficus 1 Each 70.27
bengalensis (Barged) of height 90-120 cm in big polybag
size 25-30cm
162085 Delonix regia (Gulmohar) of height 135-150 c etc., - Ficus 1 Each 168.65
bengalensis (variegated) of height 60-75 cm in earthen
pots size 30cm
162086 Delonix regia (Gulmohar) of height 135-150 c etc., - Ficus 1 Each 175.39
blackii (F.Vivion) well branched (Bushy) of height 120-135
cm in earthen pots of size 30cm
162087 Delonix regia (Gulmohar) of height 135-150 c etc., - Ficus 1 Each 93.15
elastica Decora (Rubber plant) of height 45-60 cm in each
earthen pots of size 25 cm
162088 Delonix regia (Gulmohar) of height 135-150 c etc., - Ficus 1 Each 87.34
infectoria (Pilkhan) of height 135-150 cm in big polybag of
size 25-30cm
162089 Delonix regia (Gulmohar) of height 135-150 c etc., - Ficus 1 Each 174.46
Lyrata of height 45-60 cm in earthen pots of size 25 cm
162090 Ficus regnold well branched (bushy) of height 120-135cm 1 Each 175.39
in cement pos of size 35cm
162091 Ficus regnold well branched (bushy) of height 120 etc., - 1 Each 145.42
Ficus religiosa (Peepal) of height 120-135 cm in big
polybag of size 30-35cm
162092 Ficus regnold well branched (bushy) of height 120 etc., - 1 Each 175.39
Ficus retusa well branched of height 120-135 cm in
earthen pots of 25cm
162093 Ficus regnold well branched (bushy) of height 120 etc., - 1 Each 69.92
Ficus shiela of height 120-135 cm in big polybag of size
30-35cm
162094 Ficus regnold well branched (bushy) of height 120 etc., - 1 Each 175.39
Ficus starlite of height 60-75cm in earthen pots size 25
cm
162095 Ficus regnold well branched (bushy) of height 120 etc., - 1 Each 291.54
Ficus starlite of height 90-105 cm in cement pots of size
35 cm
162096 Ficus regnold well branched (bushy) of height 120 etc., - 1 Each 59.24
Grevillea robusta (Silver Oak) of height 150-165cm in big
polybag of size 30-35 cm
162097 Ficus regnold well branched (bushy) of height 120 etc., - 1 Each 76.66
Heterophragma adenophyllum (Marore fail) of height 120-
135cm in big polybag of size 30-35cm
162098 Ficus regnold well branched (bushy) of height 120 etc., - 1 Each 146.35
Jacaranda mimosifolia of height 90-120cm in big polybag
size of size 30-35cm
162099 Ficus regnold well branched (bushy) of height 120 etc., - 1 Each 146.35
Juniperus chinenses of height 120-135cm in cement pots
of size
35cm
162100 Kigelia pinnta of height 90-120cm in big polybag of size 1 Each 146.35
30-35cm
162101 Kigelia pinnta of height 90-120cm in big polybag o etc., - 1 Each 146.35
Lagerstroemia flosreginae of height 120-135cm in big
polybag of size 30-35cm
162102 Kigelia pinnta of height 90-120cm in big polybag o etc., - 1 Each 175.39
Largerstroemia thorelli of height 120-135cm in big polybag
of size 30-35cm
162103 Kigelia pinnta of height 90-120cm in big polybag o etc., - 1 Each 24.39
Lavestonia rotundifolia (Lavestonia palm) of leaves 4-5 in
earthen pots of size 25cm
162104 Kigelia pinnta of height 90-120cm in big polybag o etc., - 1 Each 47.62
Mangifera Indica (Mango of height 60-75 cm in big
polybag of size 30-35cm
162105 Kigelia pinnta of height 90-120cm in big polybag o etc., - 1 Each 41.81
Melia azedarach of height 60-90 cm in big polybag of size
30-
35cm
162106 Kigelia pinnta of height 90-120cm in big polybag o etc., - 1 Each 53.43
Michelia champa (Golden Champa) of height 60-75 cm in
earthen pots of size 25cm
162107 Kigelia pinnta of height 90-120cm in big polybag o etc., - 1 Each 47.62
Milletia ovalifolia of height 60-70cm in big polybag of size
30-
35cm
162108 Kigelia pinnta of height 90-120cm in big polybag o etc., - 1 Each 146.35
Millingtonia hortensis of height 90-120cm in big polybag of
size
30-35cm
162109 Kigelia pinnta of height 90-120cm in big polybag o etc., - 1 Each 47.62
Mimusops elengi (Maulsri) of height 150-165cm in big
polybag of size 30-35cm
162128 Polyalthia pendula (Ashoka Pendula) of height etc., - Any 1 Each 175.39
other kind of tree of height 120-150 cm in earthen pots of
size 25cm
162129 Polyalthia pendula (Ashoka Pendula) of height etc., - Any 1 Each 99.89
other kind of tree of height 210-240-cm in gunny bag
162200 Shrubs 1
162210 Bougainvillea (named variety, bushy plant full bloom) of 1 Each 47.62
height
45-60 cm in cement pots of size 30cm
162211 Bougainvillea (named variety, bushy plant full blo etc., - 1 Each 70.85
Bougainvillea named variety, bushy plant full bloom of
height 30-
45 cm in earthen pots of size 25 cm
162212 Bougainvillea (named variety, bushy plant full blo etc., - 1 Each 163.77
Bougainvillea (Named variety, bushy plant in full bloom,
healthy plant of height 60-75 cm in cement pot of size 35
cm
162213 Bougainvillea (named variety, bushy plant full blo etc., - 1 Each 18.58
Budded roses of mixed variety, in bloom in polybag of size
30-35 cm
162214 Bougainvillea (named variety, bushy plant full blo etc., - 1 Each 18.58
Budded roses (H.T) named variety, in bloom in cement
pots of size 25 cm in polybag of size 30-35 cm
162215 Bougainvillea (named variety, bushy plant full blo etc., - 1 Each 36.01
Calliandra species of height 30-45 cm in earthen pots of
size
20cm
162216 Bougainvillea (named variety, bushy plant full blo etc., - 1 Each 24.39
Cassia biflora of height 45-60 cm in earthen pots of size
20 cm
162217 Bougainvillea (named variety, bushy plant full blo etc., - 1 Each 24.39
Cassia biflora of height 30-45 cm in polybags of size 30-
35cm
162218 Bougainvillea (named variety, bushy plant full blo etc., - 1 Each 24.39
Cassia laviegata of height 45-60 cm in earthen pots of
size 20cm
162219 Bougainvillea (named variety, bushy plant full blo etc., - 1 Each 18.58
Cassaia laviegata of height 30-45 cm in polybag of size
15-20cm
162220 Chinese lavender of height 30-45m in earthen pots of size 1 Each 12.78
20cm
162221 Chinese lavender of height 30-45m in earthen pots etc., - 1 Each 24.39
Chrysanthemum potted plant in full bloom of height 30-45
cm in earthen pots of size 25cm
162222 Chinese lavender of height 30-45m in earthen pots etc., - 1 Each 12.78
Coleus blumii of height 30-45 cm in earthen pots of 20 cm
162223 Chinese lavender of height 30-45m in earthen pots etc., - 1 Each 47.62
Croton (broad leaves) 3-5 branched of height 90-120cm in
cement pots of size 30cm
162224 Chinese lavender of height 30-45m in earthen pots etc., - 1 Each 47.62
Croton different varieties of height 30-45 cm in earthen
pots of
size 25 cm
162225 Chinese lavender of height 30-45m in earthen pots etc., - 1 Each 47.62
Croton different varieties of height 30-45 cm in earthen
pots of size 20 cm
162226 Chinese lavender of height 30-45m in earthen pots etc., - 1 Each 88.27
Croton Petra (Banglori) of height 30-45 cm in earthen pots
of size 20 cm
162227 Chinese lavender of height 30-45m in earthen pots etc., - 1 Each 6.97
Cuphea chinensis of height 30-45 cm in earthen pots of
size
20cm
162228 Chinese lavender of height 30-45m in earthen pots etc., - 1 Each 5.81
Duranta goldiana of height 30-45 cm in earthen pots of
size
20cm
162229 Chinese lavender of height 30-45m in earthen pots etc., - 1 Each 4.76
Duranta goldiana of height 30-45 cm in earthen pots of
size 15-
20cm
162240 Ficus nitida (ficus panda) of height 30-45cm in earthen 1 Each 175.39
pots of size 20cm
162241 Ficus nitida (ficus panda) of height 30-45cm in ea etc., - 1 Each 18.58
Galphimia gracilis of height 30-45 in earthen pots of size
20 cm
162242 Ficus nitida (ficus panda) of height 30-45cm in ea etc., - 1 Each 36.01
Gardenia jasminoides of height 30-45 cm in earthen pots
of size
20cm
162243 Ficus nitida (ficus panda) of height 30-45cm in ea etc., - 1 Each 18.58
Hamelia patens of well developed of height 30-45 cm in
each polybag
162244 Ficus nitida (ficus panda) of height 30-45cm in ea etc., - 1 Each 18.58
Hibiscus rosa sinensis of height 45-60 cm in earthen pots
of size
20cm
162245 Ficus nitida (ficus panda) of height 30-45cm in ea etc., - 1 Each 18.58
Hibiscus rosa sinensis of height 60-75 cm in earthen pots
of size
35cm
162246 Ficus nitida (ficus panda) of height 30-45cm in ea etc., - 1 Each 24.39
Hibiscus Variegated of height 45-60 cm in earthen pots of
size
20cm
162247 Ficus nitida (ficus panda) of height 30-45cm in ea etc., - 1 Each 24.39
Hibiscus Variegated of height 60-75 cm in earthen pots of
size
25cm
162248 Ficus nitida (ficus panda) of height 30-45cm in ea etc., - 1 Each 36.01
Ixora singaporensis of height 30-45 cm in earthen pots of
size
20cm
162249 Ficus nitida (ficus panda) of height 30-45cm in ea etc., - 1 Each 36.01
Ixora species of height 30-45 cm in earthen pots of size
20 cm
162251 Jacobinea carnea of height 30-45 cm in earthen pot etc., - 1 Each 18.58
Jasminium sambac (Motia) of height 30-45 cm in polybag
of size
20cm
162252 Jacobinea carnea of height 30-45 cm in earthen pot etc., - 1 Each 47.62
Jatropha (red colour) of height 30-45 cm in polybag
162253 Jacobinea carnea of height 30-45 cm in earthen pot etc., - 1 Each 47.62
Jatropha (red colour) of height 60-75 cm in earthen pots
of size
20cm
162254 Jacobinea carnea of height 30-45 cm in earthen pot etc., - 1 Each 12.78
Jsuticea ovata of height 30-45 cm in earthen pots of size
20 cm
162255 Jacobinea carnea of height 30-45 cm in earthen pot etc., - 1 Each 8.13
Lantanna depressa of height 30-45 in earthen pots of size
20cm
162256 Jacobinea carnea of height 30-45 cm in earthen pot etc., - 1 Each 8.13
Lantanna depressa of height 20-25 cm in polybag of size
15-
20cm
162257 Jacobinea carnea of height 30-45 cm in earthen pot etc., - 1 Each 8.13
Lantana sellowiana in bloom of height 30-45 cam in
earthen pots of 15cm
162258 Jacobinea carnea of height 30-45 cm in earthen pot etc., - 1 Each 36.01
Largerstroemia indica of height 30-45 cm in polybag of
size 15-
20cm
162259 Jacobinea carnea of height 30-45 cm in earthen pot etc., - 1 Each 36.01
Largerstroemia indica of height 60-75 cm in earthen pot of
size
20cm
162270 Russelia juncea of height 30-45 cm in earthen pots of size 1 Each 12.78
20 cm
162271 Russelia juncea of height 30-45 cm in earthen pots etc., - 1 Each 18.58
Sansevieria trifasciata of height 30-45 cm in earthen pots
of size
20 cm
162272 Russelia juncea of height 30-45 cm in earthen pots etc., - 1 Each 18.58
Tabernaemontana cororiaria (Chandni single) of height
45- 60 cm in earthen pots of 20 cm
162273 Russelia juncea of height 30-45 cm in earthen pots etc., - 1 Each 18.58
Tabernacmontana coronaria (ChandniVaruegated) of
height 45-
60 cm in earthen pots of 20 cm
162274 Russelia juncea of height 30-45 cm in earthen pots etc., - 1 Each 18.58
Tabernacmontana coronaria (Chandni) of height 45-60 cm
in polybag of size 15-20 cm
162275 Russelia juncea of height 30-45 cm in earthen pots etc., - 1 Each 18.58
Tecoma gaudichaudi of height 30-45 cm in earthen pots of
size
20 cm
162276 Russelia juncea of height 30-45 cm in earthen pots etc., - 1 Each 18.58
Tecoma capnsis of height 30-45 cm in earthen pots of size
20 cm
162277 Russelia juncea of height 30-45 cm in earthen pots etc., - 1 Each 47.62
Thevetia nerifolia ht. Well developed of height 30-45 cm in
polybag of size 15-20 cm
162278 Russelia juncea of height 30-45 cm in earthen pots etc., - 1 Each 88.27
Thuja competa of height 75-90 cm in earthen pots of size
30 cm
162279 Russelia juncea of height 30-45 cm in earthen pots etc., - 1 Each 15.10
Cama (dwarf) of height 30-45 cm in earthen pots of size
20 cm
162280 Any other kind of shrubs of height 30-45 cm in earthen 1 Each 30.20
pots of
20 cm
162310 Areca palm 4-5 suckers of height 120-135cm in earthen 1 Each 175.39
pots of size 25 cm.
162311 Areca palm 4-5 suckers of height 180-210 cm in cement 1 Each 581.91
pots of size 35 cm
162312 Areca palm 4-5 suckers of height 120-135cm in eart etc., - 1 Each 349.61
Araucaria cookii of height 30-45 cm in earthen pots of size
20 cm
162313 Areca palm 4-5 suckers of height 120-135cm in eart etc., - 1 Each 349.61
Aracaria cookii of height 75-90 cm in earthen pots of size
25 cm
162314 Areca palm 4-5 suckers of height 120-135cm in eart etc., - 1 Each 59.24
Asparagus mayerii of height 30-45 cm in earthen pots of
size 25 cm
162315 Areca palm 4-5 suckers of height 120-135cm in eart etc., - 1 Each 36.01
Asparagus mayerii of height 30-45 cm in earthen pots of
size 20 cm
162316 Areca palm 4-5 suckers of height 120-135cm in eart etc., - 1 Each 47.62
Aspidistra elatior of height 30-45 cm in earthen pots of
size 25 cm
162317 Areca palm 4-5 suckers of height 120-135cm in eart etc., - 1 Each 47.62
Dieffen bachia (different varieties) of height 30-45 cm in
earthen pots of size 25 cm
162318 Areca palm 4-5 suckers of height 120-135cm in eart etc., - 1 Each 36.01
Dieffen bachia (different varieties) of height 30-45 cm in
earthen pots of size 20 cm
162319 Areca palm 4-5 suckers of height 120-135cm in eart etc., - 1 Each 36.01
Dracaena (Mahatma) of height 30-45 cm in earthen pots
of size
20 cm
162321 Dracaena (Song of India) of height 30-45 cm in ear etc., - 1 Each 47.62
Dracaena fragrance of height 45-60 cm in earthen pots of
size 25 cm
162322 Dracaena (Song of India) of height 30-45 cm in ear etc., - 1 Each 36.01
Dracaena green of height 30-45 cm in earthen pots of size
20 cm
162323 Dracaena (Song of India) of height 30-45 cm in ear etc., - 1 Each 36.01
Dracaena marginata of height 30-45 cm in earthen pots of
size
20 cm
162324 Dracaena (Song of India) of height 30-45 cm in ear etc., - 1 Each 36.01
Dracaena reflexa of height 30-45 cm in earthen pots of
size 20 cm
162325 Dracaena (Song of India) of height 30-45 cm in ear etc., - 1 Each 65.04
Dracaena rosea of height 30-45 cm in earthen pots of size
20 cm
162326 Dracaena (Song of India) of height 30-45 cm in ear etc., - 1 Each 117.31
Dracaena Victoria of height 30-45 cm in earthen pots of
size 25 cm
162327 Dracaena (Song of India) of height 30-45 cm in ear etc., - 1 Each 47.62
Dracaena wameckai of height 30-45 cm in earthen pots of
size
20 cm
162328 Dracaena (Song of India) of height 30-45 cm in ear etc., - 1 Each 12.78
Eranthemum species of height 30-45 cm in earthen pots
of size
20 cm
162329 Dracaena (Song of India) of height 30-45 cm in ear etc., - 1 Each 175.39
Double Ficus blackii (F. vivion), well branches (Bushy) of
height
45-60 cm in earthen pots of size 25 cm
162330 Double Ficus regnold well branched (Bushy) of height 45- 1 Each 175.39
60 cm in earthen pots of size 25 cm
162331 Double Ficus regnold well branched (Bushy) of heig etc., - 1 Each 175.39
Monestra mounted on 3' moss stick of height 30-45 cm in
earthen pots of size 25 cm
162332 Double Ficus regnold well branched (Bushy) of heig etc., - 1 Each 175.39
Money plant 3' moss stick (3 in one) in earthen pots of
size 25 cm.
162333 Double Ficus regnold well branched (Bushy) of heig etc., - 1 Each 24.39
Nephrolips species (Fern) of height 30-45 cm in earthen
pots of size 25 cm
162334 Double Ficus regnold well branched (Bushy) of heig etc., - 1 Each 24.39
Nephrolips species (Fern) in earthen pots of size 20 cm
162335 Double Ficus regnold well branched (Bushy) of heig etc., - 1 Each 233.46
Philodendron Janado of height 30-45 cm in earthen pots
of size
25 cm
162336 Double Ficus regnold well branched (Bushy) of heig etc., - 1 Each 175.39
Philodendron oxycardium mounted in 3' moss stick (3 in
one) in earthen pots of size 25 cm
162337 Double Ficus regnold well branched (Bushy) of heig etc., - 1 Each 59.24
Philodendron sellum of height 30-45 cm in earthen pots of
size
25 cm
162338 Double Ficus regnold well branched (Bushy) of heig etc., - 1 Each 175.39
Rhapis excelsa (Rhapis palm) of height 45-60 cm in
earthen pots of size 30 cm
162339 Double Ficus regnold well branched (Bushy) of heig etc., - 1 Each 36.01
Scheafflera (Green) of height 30-45 cm in earthen pots of
size
20cm
162610 Hibiscus rosa sinensis of height 45-60 cm in earthen pots 1 Each 36.01
of size
20 cm
162611 Hibiscus rosa sinensis of height 45-60 cm in earth etc., - 1 Each 24.39
Lantana species of height 30-45 cm in earthen pots of
size 20 cm
162612 Hibiscus rosa sinensis of height 45-60 cm in earth etc., - 1 Each 24.39
Murrya exotica of height 30-45 cm in polybag
162613 Hibiscus rosa sinensis of height 45-60 cm in earth etc., - 1 Each 12.78
Putranjiva roxburghii of height 30 cm in polybag
162710 Yucca green (ordinary) of height 30-45 cm in earthen pots 1 Each 117.31
of size 20 cm
162810 Seasonal potted plants in full bloom of height 30-45 cm in 1 Each 36.01
earthen pots of size 25 cm
162911 Hand compression sprayer made of brass - all weld etc., - 1 Each 1743.41
(i) 6 litre capacity
162912 Hand compression sprayer made of brass - all weld etc., - 1 Each 2091.86
(ii) 9 litre capacity
163000 Foot sprayer complete with heavy iron frame, having 1 Each 3834.11
double
spring, brass cylinder and working parts, all brass balls
2m section hose & Stainer 8mm continuous delivery hose
with brass connection all brass control trigger 90 cm long
brass lauce with goose neck band and triple action
adjustable nozzle as per sample approved
164010 1
164020 1
164030 1
164040 1
164050 1
164060 1
164070 1
164080 1
164090 1
164100 1
CHAPTER - 17 : MISCELLANEOUS 1
BUILDING WORKS
171010 Repairs to plaster of thickness 12mm to 20mm in patches 1
of area 2.5Sq. metres and under including cutting the
patch in proper shape and preparing and plastering the
surface of the walls complete including disposal of rubbish
to the dumping ground within 100 metres Lead
171021 Fixing chowkhats in existing opening includi etc., - Door 1 Each 389.96
chowkhats
171030 Making the opening for door/window /clerestory window in 1 sqm 273.27
brick masonry including dismantling, fixing chowkhats,
cutting masonry and making good the damages to
walls/flooring/jambs to match existing surface including
disposal of malba to the dumping ground within 50 metres
Lead, complete
171041 Renewing glass panes with putty and nails wherever etc., 1 sqm 634.14
- Float Glass panes of thickness 4 mm
171042 Renewing glass panes with putty and nails wherever etc., 1 sqm 669.72
- Float Glass panes of thickness 5.5 mm
171050 Renewing glass panes with wooden fillets and nails 1
wherever necessary
171051 Renewing glass panes with wooden fillets and nails etc., - 1 sqm 703.31
Float Glass panes of thickness 4 mm
171052 Renewing glass panes with wooden fillets and nails etc., - 1 sqm 738.89
Float Glass panes of thickness 5.5 mm
171061 Supplying and fixing new wooden fillets with nail etc., - 1 sqm 22.20
2nd class teak wood fillets
171062 Supplying and fixing new wooden fillets with nail etc., - 1 sqm 18.40
Hollock wood fillets
171080 Refixing old glass panes with putty and nails 1 Sqm 217.29
171090 Fixing old glass panes including cutting to suitable size 1 Sqm 142.63
with wooden fillets (excluding cost of fillets and nails etc.)
171100 Providing and fixing 16mm MS Fan clamps of standard 1 Each 144.50
shape and size in existing R.C.C. slab including cutting
chase and making good with 1:2
C:S mortar and painting (Two coats) exposed portion of
the clamps complete
171121 Making opening or recesses in A.C. corrugated/ sem etc., 1 Each 15.42
- Not exceeding 100 sq.cm. in area
171122 Making opening or recesses in A.C. corrugated/ sem etc., 1 Each 18.93
- Exceeding 100 sq.cm. but not exceeding 400 sq.cm. in
area
171123 Making opening or recesses in A.C. corrugated/ sem etc., 1 Each 34.33
- Exceeding 400 sq.cm. in area
171130 Taking out wind ties from roof including cutting out rusted 1 Kg 3.06
bolts, nuts etc. incl. lead upto lead 50 M, lift
& stacking in designated store
171140 Fixing of old wind tie with new fittings including painting 1 metre 41.15
two or more coats with anticorrosive bitumastic paint of
approved brand/colour/ manufacture over priming coat of
ready mixed zinc chromate yellow primer/ ready mixed
metallic primer of approved brand
171151 Pointing on brick work with mortar of white cement etc., - 1 Sqm 62.57
Flush pointing
171152 Pointing on brick work with mortar of white cement etc., - 1 Sqm 65.98
Ruled pointing
171153 Pointing on brick work with mortar of white cement etc., - 1 Sqm 79.98
Struck or weathered pointing
171161 Pointing on tile brick work with mortar of etc., - Flush 1 Sqm 85.10
pointing
171162 Pointing on tile brick work with mortar of etc., - Ruled 1 Sqm 91.78
pointing
171163 Pointing on tile brick work with mortar of etc., - Struck or 1 Sqm 104.62
weathered pointing
171171 Providing and laying integral cement ba etc., - Using 1 Sqm 649.66
rough kota stone
171172 Providing and laying integral cement ba etc., - Using 1 Sqm 432.46
rough red sand stone
171180 Providing and laying integral cement based treatment for 1
water proofing on the vertical surfaces by fixing specified
stone slab 20mm thick with cement slurry mixed with
water proofing compound conforming to IS: 2645 in
recommended proportions with a gap of 20mm (minimum)
between stone slabs and the receiving surfaces and filling
the gaps with neat cement slurry mixed with water
proofing compound and finishing the exterior of stone slab
with cement mortar 1:3 (1cement:
3coarse sand) 20mm thick with neat cement punning
mixed with water proofing compound in recommended
proportion complete at all levels and as directed by the
Engineer-in-Charge
171181 Providing and laying integral cement ba etc., - Using 1 Sqm 720.97
rough kota stone
171182 Providing and laying integral cement ba etc., - Using 1 Sqm 503.77
rough red sand stone
171190 Providing and laying water proofing treatment to vertical 1 Sqm 289.41
and horizontal surfaces of depressed portions of WC,
kitchen and the like consisting of : (i) 1st course of cement
slurry @ 4.4kg/ sqm mixed with water proofing compound
conforming to IS:
2645 in recommended proportions incl. rounding of
junction of vertical and horizontal surfaces. (ii) 2nd course
of 20mm cement plaster 1:3 (1cement:
3coarse sand) mixed with water proofing compound
(iii) 3rd course of blown or residual bitumen applied hot @
1.7kg/ sqm & (iv) 4th course of 400micron thick PVC
sheet with 100mm wide overlaps at joints pasted to each
other with bitumen @ 1.7kg/ sqm
171201 Providing and placing in position suitable PVC wat etc., - 1 metre 457.66
Serrated with central bulb (225mm wide, 8-11mm thick)
171202 Providing and placing in position suitable PVC wat etc., - 1 metre 429.78
Dumb bell with central bulb (180mm wide, 8mm thick)
171203 Providing and placing in position suitable PVC wat etc., - 1 metre 417.01
Kickers (320mm wide, 5mm thick)
171210 Providing and laying water proofing treatment in sunken 1 Sqm 140.87
portion of WCs, bathroom etc. by applying cement slurry
mixed with water proofing cement compound as per IS
2645 in layers a) 1st layer of slurry of cement @ 0.488kg/
sqm mixed with water proofing cement compound @
0.253 lit/Sqm, allowed to air cure for 4hours.(b) 2nd layer
of slurry of cement @ 0.242kg/ sqm mixed with water
proofing cement compound @ 0.126 lit/Sqm, allowed to
air cure for 4 hours followed with water curing for
48hours.Rate includes preparation of surface, treatment,
sealing of all joints, corners, junctions of pipes and
masonry with polymer mixed slurry. Rendering/ plastering
as protective layer, if required will be paid separately
171220 Providing and laying water proofing treatment on roofs of 1 Sqm 227.89
slabs by applying cement slurry mixed with water proofing
cement compound as per IS 2645 in layers (i) After
surface preparation, 1st layer of slurry of cement @
0.488kg/ sqm mixed with water proofing cement
compound @ 0.253 lit/sqm (ii)
2nd layer of Fibre glass cloth while 1st layer is still green.
Overlaps of joints of fibre cloth should not be less than
10cm (iii) 3rd layer of 1.5mm thickness consisting of slurry
of cement @ 1.289kg/ sqm mixed with water proofing
cement compound @
0.67 lit/sqm and coarse sand @ 1.289kg/ Sqm, allowed to
air cure for 4hours followed by water curing for 48hours.
(iv) 4th and final layer of brick tiling with cement mortar
which will be paid for separately
171230 Providing and laying integral cement based water proofing 1 Sqm 464.47
treatment incl. preparation of surface on roofs, balconies,
terraces etc. (i) Grouting a slurry coat of neat cement @
2.75kg/ sqm mixed with water proofing compound
conforming to IS: 2645 inc. walls upto 300mm height. (ii)
Laying CC with brickbats 25 to 40mm with 50% of cement
mortar
1:5 (1 cement : 5 coarse sand) mixed with water proofing
compound over 20mm thick layer of cement mortar of 1:5
mortar mixed with water proofing compound to required
slope, treating adjoining walls upto 300mm height,
rounding of junctions. (iii) Curing for 2 days & applying
2nd coat of cement slurry @ 2.75 kg/sqm mixed with
water proofing compound. (iv) Finishing surface with
20mm thick jointless cement mortar of mix 1:4 (1 cement :
4 coarse sand) including laying of glass fibre cloth of
approved quality in top layer of plaster mixed with water
proofing compound and finishing surface with trowel with
neat cement slurry and making pattern of 300x300mm
square, 3mm deep with average thickness of 120mm and
minimum thickness at khurra as 65mm
171240 Supplying and applying bituminous solution primer on roof 1 Sqm 31.10
and or wall surface at 0.24litre per sqm
171250 Water proofing of Overhead & Underground water tank by 1 Sqm 332.71
: Providing and fixing 12mm N.B.M.S. threaded nozzle of
75mm length upto reqd. depth in an approximate grid
pattern at a spacing not exceeding 1.5m c/c on entire
flooring, walls etc. followed by injecting water-proof Non-
shrinkable Polymeric Grouting Compound (NSPGC)
mixed with cement slurry @ 2% of weight of cement
through nozzle under 2.5 kg/cm2 pressure. The grout
should be pumped until it flows through all pores and
voids thereby sealing them. The nozzles should be sealed
with quick setting admixture. Thereafter two coats of
Tapecrete acrylic based polymer water proofing
compound (having solid content 30% ± 2, pH >7) admixed
with cement in 1:2 ratio to be applied on the entire surface
of tank, 12 mm thick 1:4 plaster (to be paid separately) to
be applied as a top coat
171261 Grading / Regrading of roof for water proo etc., - Cement 1 cum 2076.95
concrete 1:2:4 (1cement: 2coarse sand:
4graded stone aggregate 20mm nominal size)
171262 Grading / Regrading of roof for water proo etc., - Cement 1 cum 2894.87
mortar 1:3 (1cement: 3coarse sand)
171263 Grading / Regrading of roof for water proo etc., - Cement 1 cum 2894.87
mortar 1:4 (1cement: 4coarse sand)
171270 Providing and fixing corner beading of 2nd class teak 1 metre 318.64
wood of size 60x65mm including screws etc. complete
171280 Providing and fixing fancy printed tiles of size 1 Sqm 541.27
150x75 mm or any other suitable length confirming to IS:
15622 in border of baths and toilets on
12mm thick cement plaster 1:3/ chemical adhesive
(1cement : 3coarse sand) jointed with matching pigment
etc. complete
171290 Providing and laying vitrified printed border tiles of size 1 Sqm 650.49
400x100mm or any other size conforming to IS:15622 on
mosaic floor after hacking with suitable floor adhesive like
ultimate or unitiles etc. including finishing the joints,
pointed with white cement slurry with suitable pigment to
match the shade of the tiles etc. complete
171300 Providing and fixing stainless steel kitchen rack of suitable 1 Kg 65.10
size of approved make
171310 Providing & fixing reflective paver blocks of approved 1
sizes and design, conforming to IS:15658-
2006, manufactured with wet cast vibration system in two
layers, 10-15 mm thick top layer consisting of graded
stone aggregate, silica sand and UV stabilised iron oxide
Bayer colour and bottom layer with M-40 concrete having
galvanised steel fibre reinforcement; to be fixed over
uniform bedding of
50mm thick fine sand & joints filled with sand for thickness
as :
171311 Providing & fixing reflective paver bloc etc., - 60mm thick 1 Sqm 788.48
reflective paver blocks
171312 Providing & fixing reflective paver bloc etc., - 80mm thick 1 Sqm 892.44
reflective paver blocks
171331 Diluting and injecting chemical e etc., - Along external wall 1 metre 8.78
where the apron is not provided using chemical emulsion
@ 7.5 litres/ Sqm of the vertical surface of the
substructure to a depth of
300mm including excavating channel along the wall and
rodding etc. and making good the same
171332 Diluting and injecting chemical e etc., - Along the external 1 metre 12.91
wall below concrete or masonry apron using chemical
emulsion @ 2.25 litres per linear metre including drilling &
plugging holes etc.
171333 Diluting and injecting chemical e etc., - Treatment of soil 1 Sqm 67.17
under existing floors using chemical emulsion @ one litre
per hole, 300mm apart including drilling 12mm diameter
holes and plugging with cement mortar 1:2 (1cement:
2coarse sand) to match the existing floor
171350 Fixing holding down bolts in masonry. (Labour rates only) 1 Each 23.58
171360 Re-caning seat and back of chair with Contractor's plastic 1 Each 134.04
cane as per IS 5378
171370 Supply of boat with boatman on hire in day time up to 8 1 Each 1163.24
hours.(minimum capacity of the boat to be 6 adult men)
171380 Supply of boat with boatman on hire in night time upto 8 1 Each 1745.15
hours. (minimum capacity of the boat to be 6 adult men)
171390 Double bamboo mat walling with split bamboo reepers 1 Sqm 157.37
average dia 7.5 cm on both sides, both ways at 45 cms
centres including nails and erection complete
171400 Supplying bullock cart on hire with 2 bullocks and one 1 Each 741.27
cartman per day of 8 Hours (Including all consumables
etc.)
171410 Selection of suitable site for drilling bore well/tube well by 1 Each 871.13
electrical resistivity method for all diameters
171420 Supplying, fitting, fixing & installing including boring of 40 1 Each 44725.36
mm dia hand tube well assembly India Mark II having total
depth of 50 metres with the following components as per
IS:9301 : i) Hand pump (single acting) India mark - II
galvanised as per IS : 9301
- 90. ii) Brass strainer mesh type made of long slotted
medium B class G.I. pipes with 80-mesh brass wire net
wrapping around the perforated pipe and jacketed by 26 /
28 SWG brass perforated sheet. 40 mm dia (2 lengths of
each 1.83 m connected with G.I. socket). iii) C.I. cylinder
with G.M. parts India mark - II 65 mm dia x 0.45 m long as
per IS: 9301 - 90. iv) G.I. casing pipe 100 mm dia medium
quality ISI marked 18 m long. v) G.I. pipe 40 mm dia
medium quality ISI marked 28.35 m long. vi) 32 mm dia
G.I. pipe (riser) medium quality ISI marked 17 m long. vii)
12 mm dia bright bar electro galvanised connecting rod,
3.0 m long each as per IS : 9301 of length as required.
viii) all accessories as per IS: 9301 -90 such as G.I.
reducing socket 100 mm x 40 mm, C.I. plug cutter
40 mm, base plate, M.S. nuts & bolts etc.The work also
includes priming, development and testing of the yield
(which should be sufficient enough) for seven days with all
labour, material, tools and plants complete. ix) 40 mm dia
G.I. ISI marked medium quality hanging pipe to the extent
of 17 m. x) all accessories such as C.I. plug cutter 40 mm,
base plate, M.S. nuts & bolts etc. as required . The work
also includes priming & development and testing of the
yield (which should be sufficient enough) for seven days
171430 Extra / Less for sinking including drilling, supplying, fitting, 1 metre 839.13
fixing & installing of G.I. casing pipe 100 mm dia medium
ISI marked over 18 m
171440 Extra / Less for sinking, supplying, fitting, fixing & 1 Each 282.47
installing of G.I. riser pipe 32 mm dia medium ISI marked
over 17 m
171450 Supplying, boring, sinking & installation of 40 mm dia 1 Each 45037.89
hand tube well pump assembly having total depth of 50
metres with the following components as per IS:9301 : i)
Double guided head stroke / 80 mm x 40 mm deep
tubewell hand pump No. 6 of complete. ii) Brass strainer
mesh type “Dinco” or equivalent made of long slotted
medium B class G.I. pipes with 80-mesh brass wire net
wrapping around the perforated pipe and jacketed by 26 /
28 SWG brass perforated sheet. 40 mm dia- 2 lengths
each of 1.83 m connected with G.I. socket. iii) All brass
cylinder 65 mm dia 450 mm long with brass plunger,
plunger rod socket, all brass poppet/lower valve bucket
leather complete. iv) G.I. Casing pipe ISI marked 80 mm
dia medium quality 18 m long. v) G.I. pipe ISI marked 40
mm dia medium quality
28.35 m long. vi) 80 mm x 40 mm dia G.I. Reducing
socket of approved quality. vii) 12 mm dia bright bar
electro galvanised connecting rod "Dinco"
/ "BJH" or equivalent, 3.0 m long each with G.I. coupling
of length as required at site of work
171460 Extra / Less for sinking including drilling, supplying, fitting, 1 metre 627.46
fixing & installing of G.I. casing pipe 80 mm dia medium
ISI marked over 18 m
171470 Extra / Less for sinking including drilling, supplying, fitting, 1 metre 403.78
fixing & installing of G.I. riser pipe 40 mm dia medium ISI
marked over 17 m
171480 Extra for providing Stainless Steel cylinder 65 mm dia. 1 Each 307.80
instead of all brass cylinder
171501 Extra for providing the following type of straine etc., - 1 Each 585.16
Brass jacketed strainer 40 mm dia x 1.83 m long
171502 Extra for providing the following type of straine etc., - Low 1 Each 140.54
Carbon Galvanised (LCG) jacketed strainer 40 mm dia x
1.83 m long
171503 Extra for providing the following type of straine etc., - 1 Each 681.80
Stainless steel jacketed strainer 40 mm dia x 1.83 m long
171511 Supplying, fitting & fixing in position extra stra etc., - Brass 1 Each 1359.83
jacketed strainer
171512 Supplying, fitting & fixing in position extra stra etc., - Low 1 Each 1137.52
Carbon Galvanised (LCG) jacketed strainer
171513 Supplying, fitting & fixing in position extra stra etc., - 1 Each 1408.15
Stainless steel jacketed strainer
171514 Supplying, fitting & fixing in position extra stra etc., - Brass 1 Each 632.27
strainer mesh type
171520 Drilling of bore well for specified depth in all types of soil 1
and rock mechanically with all contractor’s tools, plants,
material and labour up to 75 meters
171521 Drilling of bore well for specified depth in all t etc., - For 1 metre 207.70
150 mm dia
171522 Drilling of bore well for specified depth in all t etc., - For 1 metre 435.70
200 mm dia
171523 Drilling of bore well for specified depth in all t etc., - For 1 metre 522.84
250 mm dia
171524 Drilling of bore well for specified depth in all t etc., - Extra 1 metre 41.54
over 75m drilling for 150mm dia
171525 Drilling of bore well for specified depth in all t etc., - Extra 1 metre 87.14
over 75m drilling for 200mm dia
171526 Drilling of bore well for specified depth in all t etc., - Extra 1 metre 104.57
over 75m drilling for 250mm dia
171531 Providing supplying, lowering and fixing in etc., - 100 mm 1 metre 841.19
internal pipe
171532 Providing supplying, lowering and fixing in etc., - 150 mm 1 metre 1097.46
internal pipe
171533 Providing supplying, lowering and fixing in etc., - 200 mm 1 metre 1413.33
internal pipe
171540 Providing supplying, lowering and fixing in bore 1
unperforated MS casing pipe 6 mm thickness up to
specified depth below ground level with all contractor’s
tools, plants, material and labour etc. complete
171541 Providing supplying, lowering and fixing in etc., - 100 mm 1 metre 729.28
internal pipe
171542 Providing supplying, lowering and fixing in etc., - 150 mm 1 metre 960.42
internal pipe
171543 Providing supplying, lowering and fixing in etc., - 200 mm 1 metre 1263.57
internal pipe
171551 Extra for using slotted or perforated MS casing pi etc., - 1 metre 66.74
100 mm internal pipe
171552 Extra for using slotted or perforated MS casing pi etc., - 1 metre 88.60
150 mm internal pipe
171553 Extra for using slotted or perforated MS casing pi etc., - 1 metre 110.46
200 mm internal pipe
171561 Providing, supplying and fixing mild steel plug o etc., - 1 Each 82.26
100mm dia
171562 Providing, supplying and fixing mild steel plug o etc., - 1 Each 118.26
150mm dia
171563 Providing, supplying and fixing mild steel plug o etc., - 1 Each 165.89
200mm dia
171571 Extracting G.I. Pipe 40/32 mm dia incl etc., - Upto 50 1 metre 43.22
metre deep
171572 Extracting G.I. Pipe 40/32 mm dia incl etc., - More than 50 1 metre 67.16
metre deep
171580 Taking out hand tube well pump or hand pump including 1 Each 733.43
head, handle, plunger, G.I. hanging pipe, cylinder,
connecting rod etc. and depositing the same in the stores
171590 Supplying & fixing sun control film of approved quality and 1 Sqm 189.13
make over door/window/clery storey window
171600 Providing, driving and installing driven cast-in-situ 1
reinforced cement concrete piles M 35 grade to carry safe
working load not less than specified, including the cost of
shoe and pile to be embedded in the pile cap as a
complete job. Payment for steel reinforcement & cement
will be made extra. Length of pile for payment shall be
measured from top of shoe to the bottom of pile cap
171601 Providing, driving and installing driven cast-in- etc., - 1 metre 1219.60
400mm dia piles
171602 Providing, driving and installing driven cast-in- etc., - 1 metre 1485.18
450mm dia piles
171603 Providing, driving and installing driven cast-in- etc., - 1 metre 1774.99
500mm dia piles
171604 Providing, driving and installing driven cast-in- etc., - 1 metre 1861.78
550mm dia piles
171613 Boring, providing and installing bored cast-in-si etc., - 1 metre 1551.21
450mm dia piles
171614 Boring, providing and installing bored cast-in-si etc., - 1 metre 1713.10
500mmdia piles
171615 Boring, providing and installing bored cast-in-si etc., - 1 metre 2184.03
600mm dia piles.
171621 Boring, providing and installing cast-in-situ sin etc., - 1 metre 1494.08
300mm dia piles
171622 Boring, providing and installing cast-in-situ sin etc., - 1 metre 1676.45
400mm dia piles
171623 Boring, providing and installing cast-in-situ sin etc., - 1 metre 1778.59
450mm dia piles
171624 Boring, providing and installing cast-in-situ sin etc., - 1 metre 1898.10
550mm dia piles
171631 Extra over item above for providing additional bul etc., - 1 Each 1059.20
300mm dia piles
171632 Extra over item above for providing additional bul etc., - 1 Each 1138.06
400mm dia piles
171633 Extra over item above for providing additional bul etc., - 1 Each 1185.98
450mm dia piles
171634 Extra over item above for providing additional bul etc., - 1 Each 1292.98
550 mm dia piles
171641 Providing, driving and installing Pre-cast reinfo etc., - 1 metre 1320.06
400mm dia.
171642 Providing, driving and installing Pre-cast reinfo etc., - 1 metre 1393.70
450mm dia.
171643 Providing, driving and installing Pre-cast reinfo etc., - 1 metre 1480.37
500mm dia.
171644 Providing, driving and installing Pre-cast reinfo etc., - 1 metre 1576.35
550mm dia.
171651 Vertical load testing of piles in accordance with etc., - 1 Each 24391.50
Single pile upto 50 tonne capacity- initial test Test
171652 Vertical load testing of piles in accordance with etc., - 1 Each 13357.25
Single pile upto 50 tonne capacity - routine test Test
171653 Vertical load testing of piles in accordance with etc., - 1 Each 31941.25
Single pile above 50 tonne and upto 100 tonne capacity - Test
initial test
171654 Vertical load testing of piles in accordance with etc., - 1 Each 20907.00
Single pile above 50 tonne and upto 100 tonne capacity - Test
routine test
171661 Group of two or more piles (each pile capacity upt etc., - 1 Each 43556.25
Initial test Test
171662 Group of two or more piles (each pile capacity upt etc., - 1 Each 26714.50
Routine test Test
171671 Cyclic vertical load testing of pile in accordance etc., - 1 Each 13357.25
Single pile upto 50 tonne capacity Test
171672 Cyclic vertical load testing of pile in accordance etc., - 1 Each 20907.00
Single pile above 50 tonne and upto 100 tonne capacity Test
171673 Cyclic vertical load testing of pile in accordance etc., - 1 Each 26714.50
Group of two or more piles (each pile capacity upto Test
50 tonne)
171681 Lateral load testing of single pile in accordance etc., - 1 Each 14692.98
Vertical load capacity upto 50 MT Test
171682 Lateral load testing of single pile in accordance etc., - 1 Each 22997.70
Vertical load capacity above 50 tonne and upto 100 tonne Test
171720 Providing general pest control service in colonies, offices, 1 Sqm 47.22
rest houses etc. to eliminate cockroaches, red and black
ants, silver fish by applying cockroach gel (pyrethrum
extract) and Deltamethrin Chemical repeated quarterly for
one year as per specifications mentioned in Indian
Railways Standard Specifications. (Payment to be
released in four quarterly installments)
172010 Supplying and applying leak proof polygrout to stop 1 Each 1687.74
oozing water, with the help of NBMs threaded nozzles
complete job including fixing of nozzles, injecting
polygrout and sealing of nozzles with the help of sealing
compound
172020 Supplying, erecting and fixing precast concrete reinforced 1 Each 8326.74
bench with back rest. Bench shall consist of 2 nos. L
shaped base support in natural cement colour of
thickness 100 mm, back height 1000 mm, front height 450
mm, base width 620 mm and 5 nos. reinforced concrete
planks in red colour and size of 1500 x 100 x 50mm and 1
no. reinforced concrete plank of 150 x 200 x 50mm;
manufactured by using M-30 grade concrete & reinforced
suitably; all parts to be joined with galvanised nuts and
bolts of suitable size. All bolts to be sealed after assembly.
Complete job to be done as per directions of Engineer
Incharge
172030 Providing and fixing glazed or unglazed full body 1 Sqm 797.73
homogenous anti-algal, all weather resistant ceramic
landscaping/facia vitrified tiles (Cladding), conforming to
tests as per IS:4457-2007, having water absorption <
0.5%, having sizes as 300mm x
300mm x 8mm, 200mm x 400mm x 9mm, 400mm x
400mm x 9mm and 300mm x 600mm x 10mm &
240mm x 60mm x 7.3mm in approved shade, colour &
quality. Tiles to be laid on 20 mm average thick cement
mortar bed of 1:4 (1 cement : 4 coarse sand) and joints
filled with polymer based cementitious grout with all
labour, material complete job
172050 Extra over item 172040 for using SS 316 Grade stainless 1 Kg 92.92
steel (to be used in corrosive coastal areas) instead of SS
304 Grade
173010 supplying and fixing vertical venetian cloth blinds 100mm 1 Sqm 954.00
wide of desired shade and design with sliding track,
chords etc, complete with all contractor's materials labore
tools lead and lift and etc ,and as per instructions of
Engineer -in- charge
173020 1
173030 1
173040 1
CONCRETE 1 0 0.00
181010 Demolishing lime concrete and disposal of material within 1 cum 178.27
50m lead
181020 Demolishing plain cement concrete including disposal of 1
material within 50m lead
181021 Demolishing plain cement concrete including dispos etc., - 1 cum 510.54
1:2:4 or richer mix with max. 20 mm coarse aggregate
181022 Demolishing plain cement concrete including dispos etc., - 1 cum 314.85
Mix leaner than 1:2:4 with coarse aggregate larger than
20mm
181023 Demolishing plain cement concrete including dispos etc., - 1 cum 548.75
Dismantling concrete kerb stones/rail level platform
stones
/concrete beams / slabs or similar light structural parts/
stones without appreciable damage including stacking
181030 Demolishing R.C.C. work including cutting and stacking of 1 cum 744.82
steel bars and disposal of unserviceable material within
50m lead. (Extra payment for scraping, cleaning and
straightening of bars to be made separately)
181040 Extra over Item Nos. 181021 and 181050 if pavement 1 cum 223.44
breaker is used on orders of Engineer
181050 Demolishing R.B work including stacking of steel bars and 1 cum 665.59
disposal of unserviceable material within 50m lead (Extra
payment for scraping, cleaning and straightening of bars
to be made separately)
MASONRY 1
182011 Demolishing brick work including stacking of serv etc., - In 1 cum 147.67
mud mortar
182012 Demolishing brick work including stacking of serv etc., - In 1 cum 178.27
lime mortar/ lime cinder mortar
182013 Demolishing brick work including stacking of serv etc., - In 1 cum 431.31
cement mortar
182020 Extra for removing mortar from bricks and cleaning bricks 1
(stacks of cleaned bricks shall be measured)
182021 Extra for removing mortar from bricks and cleaning etc., - 1000 Nos. 977.01
From brick work in mud mortar
182022 Extra for removing mortar from bricks and cleaning etc., - 1000 Nos. 1129.55
From brick work in lime mortar/ lime cinder mortar
182023 Extra for removing mortar from bricks and cleaning etc., - 1000 Nos. 1413.93
From brick work in cement mortar
182031 Demolishing stone rubble masonry including stackin etc., - 1 cum 181.81
Dry masonry
182032 Demolishing stone rubble masonry including stackin etc., - 1 cum 242.72
In lime mortar
182033 Demolishing stone rubble masonry including stackin etc., - 1 cum 514.68
In cement mortar
182041 Dismantling dressed stone work, ashlar face stone etc., - 1 cum 307.02
In lime mortar
182042 Dismantling dressed stone work, ashlar face stone etc., - 1 cum 602.12
In cement mortar
182061 Extra over basic Items for removing mortar etc., - In lime 1 cum 101.86
mortar
182062 Extra over basic Items for removing mortar etc., - In 1 cum 144.78
cement mortar
182070 Dismantling old plaster or skirting raking out joints and 1 Sqm 11.31
cleaning the surface for plaster/pointing including disposal
of rubbish within 50m lead
183040 Dismantling Paver block/ stone sett flooring laid in dry 1 Sqm 44.79
mortar/ cement mortar / bitumen, including stacking
material within 50m lead
183050 Extra for cleaning the stone sets with cement mortar & 100 Nos. 211.90
bitumen
184010 Demolishing brick tile covering (single layer) in terracing 1 Sqm 22.60
including stacking of serviceable material and disposal of
unserviceable material within 50m lead
184030 Dismantling stone slab roofing including all coverings over 1 cum 746.96
wooden karries or R.C.C. battens (dismantling karries and
battens to be paid separately) including stacking of
serviceable material and disposal of unserviceable
material within 50m lead
184050 Dismantling Single tiled roofing of any type with battens 1 Sqm 44.22
boarding etc. complete including stacking of serviceable
material and disposal of unserviceable material within
50m lead
184060 Dismantling Double layer tiled roofing of any type with 1 Sqm 77.16
battens boarding etc. complete including stacking of
serviceable material and disposal of unserviceable
material within 50m lead
184070 Dismantling ridges, hips valleys and gutters etc of any 1 metre 6.47
material and stacking the material within 50m lead
184081 Dismantling roofing including ridges, hips va etc., - G.I. 1 sqm 35.21
sheet
185010 Dismantling doors, windows and clerestory windows (steel 1 Each 106.53
or wood) shutter including chowkhats, architrave,
holdfasts in CC or masonry etc. complete and stacking
within 50m lead
185020 Taking out doors, windows, clerestory window, cupboard 1 Each 40.51
shutters only (steel or wood) including stacking within
50m lead
185031 Dismantling wood work in frames, trusses, purlins etc., - 1 cum 955.32
Of sectional area 40sqcm and above
185032 Dismantling wood work in frames, trusses, purlins etc., - 1 cum 1075.82
Of sectional area below 40sqcm
185040 Dismantling wooden trellis work excluding frames but 1 sqm 13.76
including stacking the serviceable material within 50m
185050 Dismantling wooden ballies in posts and struts including 1 metre 4.38
cutting if required and stacking within 50m lead
185061 Dismantling wooden boarding in lining of wal etc., - Upto 1 sqm 13.13
10mm thick
185080 Taking out existing broken glass panes from existing door, 1 sqm 53.22
windows, partitions etc. including stacking/disposal
185090 Taking out existing laminated sheets (Sunmica etc.) from 1 sqm 16.61
doors, windows, partitions boards etc.
STEEL WORK 1
186011 Dismantling steel work in single section etc., - R.S. joists./ 1 Kg 0.70
Rails
186020 Dismantling steel work and trusses upto 10m span and 1 Kg 1.19
5m height in built up sections in angles, tees, flats and
channels including all gusset plates, bolts, nuts, cutting
rivets, welding etc. including dismembering and stacking
within 50m lead
186030 Dismantling steel work and trusses upto 10m span and 1 Kg 0.80
upto 5m height (height of lowest member from ground) in
built up sections and stacking within 50m lead
186040 Extra over item 186020 & 186030 for dismantling trusses, 1 Kg 0.18
rafters, purlins etc. of steel work for additional span length
of one metre or part thereof beyond 10m
186050 Extra over item 186030 & 186040 for dismantling trusses, 1 Kg 0.18
rafters, purlins etc. of steel work for additional height of
one metre or part thereof beyond 5m
186080 Dismantling, iron collapsible gate, rolling shutter, M.S. 1 sqm 49.84
Grill, M.S. Gates, Palisade fencing etc.with post & stays
including stacking of serviceable materials and disposal of
unserviceable materials within 50 m lead
186090 Taking out rail posts of any height and stacking within 1 Each 67.76
50m. (Demolishing of concrete/masonry, if required to be
done, will be paid extra)
FENCING 1
187011 Dismantling and stacking within 50m lead, fencing etc., - 1 Each 55.55
‘T” or ‘L’ iron or pipe, rail or RSJs
187012 Dismantling and stacking within 50m lead, fencing etc., - 1 Each 65.42
R.C.C. / Stone
188021 Dismantling G.I. /PVC pipes (external work) etc., - Upto 1 metre 33.02
40mm dia
188022 Dismantling G.I. /PVC pipes (external work) etc., - Above 1 metre 37.18
40mm dia
188030 Dismantling rain water pipe of G.I, C.I, M.S, SCI, asbestos 1
or PVC with fittings and clamps, including stacking the
material within 50m lead
188031 Dismantling rain water pipe of G.I, C.I, M.S, SCI, etc., - 1 metre 15.84
Dia of 80mm and below
188032 Dismantling rain water pipe of G.I, C.I, M.S, SCI, etc., - 1 metre 16.36
Dia of above 80mm
188051 Dismantling of C.I. sluice and similar valve etc., - Upto 1 Each 72.76
150mm diameter
188052 Dismantling of C.I. sluice and similar valve etc., - Above 1 Each 258.29
150mm diameter
MISCELLANEOUS ITEMS 1
189010 Dismantling sleeper huts complete with roof and flooring 1 sqm 81.93
etc.
189020 Dismantling expanded metal, BRC, IRC, welded mesh or 1 sqm 16.11
similar materials incl. beading and stacking the
serviceable material within 50m lead
189050 Dismantling hessian cloth or similar textile covering from 1 sqm 6.06
ceiling or walling etc.
189061 Removing thatch only with binding materials etc., - Upto 1 sqm 6.25
150mm thick
189062 Removing thatch only with binding materials etc., - Above 1 sqm 7.39
150 mm thick
189070 Removing tar felts or bitumen felts (Any no of layers) 1 sqm 12.36
from roofs parapets etc including disposal by burning.
189080 Dismantling of old S.W. pipes including breaking of joints 1
and partial bed concrete (Brick or stone) as required,
stacking of useful material near the site within 50m lead
and disposal of unserviceable material into municipal /
Railway dumps
189081 Dismantling of old S.W. pipes including breaking o etc., - 1 metre 35.46
100mm diameter
189082 Dismantling of old S.W. pipes including breaking o etc., - 1 metre 39.93
150mm diameter
189083 Dismantling of old S.W. pipes including breaking o etc., - 1 metre 42.75
200mm diameter
189084 Dismantling of old S.W. pipes including breaking o etc., - 1 metre 47.68
250mm diameter
189085 Dismantling of old S.W. pipes including breaking o etc., - 1 metre 53.45
300mm diameter
189086 Dismantling of old S.W. pipes including breaking o etc., - 1 metre 55.84
350mm diameter
189110 Taking out European or Indian type WC, Squatting plate 1 Each 138.28
Complete with all parts including making good the walls
complete, if required
189120 Taking out Wash hand basin and sink complete with all 1 Each 158.64
parts including making good the walls complete, if
required
189130 Taking out flat back or angular lipped urinal basin. 1 Each 135.46
Complete with all parts including making good the walls
complete, if required
189140 Taking out Squatting Urinal plate Complete with all parts 1 Each 146.21
including making good the walls complete, if required
189210 1
189220 1
189230 1
189240 1
189250 1
189260 1
189270 1
189280 1
189290 1
189300 1
CHAPTER - 19 : BRIDGE WORKS - 1
SUBSTRUCTURE
191013 Exploratory drilling of Boreholes down t etc., - 20m to 30m 1 metre 1393.80
191014 Exploratory drilling of Boreholes down t etc., - 30m to 40m 1 metre 1451.88
191015 Exploratory drilling of Boreholes down t etc., - 40m to 50m 1 metre 1533.18
191016 Exploratory drilling of Boreholes down t etc., - 50m to 60m 1 metre 1626.10
191022 Exploratory drilling of Boreholes down t etc., - 10m to 20m 1 metre 3252.20
191023 Exploratory drilling of Boreholes down t etc., - 20m to 30m 1 metre 3368.35
191024 Exploratory drilling of Boreholes down t etc., - 30m to 40m 1 metre 3484.50
191025 Exploratory drilling of Boreholes down t etc., - 40m to 50m 1 metre 3600.65
191026 Exploratory drilling of Boreholes down t etc., - 50m to 60m 1 metre 3716.80
191030 Extra for 150mm dia bore in hard Rock/ large 1 metre 5226.75
Boulder at all levels
191042 Drilling of NX size borehole (75 mm dia) in all ty etc., - 1 metre 3716.80
10m to 20m
191043 Drilling of NX size borehole (75 mm dia) in all ty etc., - 1 metre 3949.10
20m to 30m
191044 Drilling of NX size borehole (75 mm dia) in all ty etc., - 1 metre 4413.70
30m to 40m
191045 Drilling of NX size borehole (75 mm dia) in all ty etc., - 1 metre 4646.00
40m to 50m
191046 Drilling of NX size borehole (75 mm dia) in all ty etc., - 1 metre 4878.30
50m to 60m
191047 Drilling of NX size borehole (75 mm dia) in all ty etc., - 60 1 metre 5110.60
m to 70 m
191051 Conducting in situ full size Plate load test (PLT) etc., - a. 1 Each 17422.50
Plate size 30 cm x 30 cm
191052 Conducting in situ full size Plate load test (PLT) etc., - b. 1 each 20907.00
Plate size 45 cm x 45 cm
191053 Conducting in situ full size Plate load test (PLT) etc., - c. 1 Each 23230.00
Plate size 60 cm x 60 cm
191060 Conducting in situ Vane shear test for soil as per 1 Each 1161.50
IS 4434
191100 Taking out 100mm dia & 450mm long undisturbed 1 Each 116.15
samples of soil from bore holes, including provision of air
tight containers for packing and, labelling incl. transporting
the samples to laboratory. Piston sampler shall be used
for extracting undisturbed samples where necessary.
Samples shall be collected as per IS
2720
191110 Taking out 100mm dia & 450mm long disturbed samples 1 Each 174.23
of soil from bore holes, including provision of air tight
containers for packing, labelling and transporting the
samples to laboratory. Samples shall be collected as per
IS
2720
191144 Conducting laboratory Tests on collected soil etc., - Grain 1 Each 261.34
size analysis including Hydrometer analysis
191145 Conducting laboratory Tests on collected soil etc., - Direct 1 Each 929.20
Shear Test
191149 Conducting laboratory Tests on collected soil etc., - Tri- 1 Each 1161.50
axial test
OPEN FOUNDATION 1
192011 Earth work in excavation for foundations and floo etc., - All 1 cum 147.10
kinds of soils
192012 Earth work in excavation for foundations and floo etc., - 1 cum 207.73
Ordinary rock
192013 Earth work in excavation for foundations and floo etc., - 1 cum 363.12
Hard rock ( requiring blasting)
192014 Earth work in excavation for foundations and floo etc., - 1 cum 427.31
Hard rock ( blasting prohibited )
192020 Extra for the quantity of works, executed in or underwater 1 cum 20% of Basic
and/ or liquid mud including pumping out water as Items
required
192050 Providing and laying in position machine mixed, machine 1 cum 1940.73
vibrated and machine batched Design Mix Cement
Concrete M20 grade (Cast - in Situ) using 20 mm graded
crushed stone aggregate and coarse sand of approved
quality in Abutment, pier, wing walls and return walls of
Mass cement concrete above RCC raft Including finishing
complete as per specifications and direction of the
Engineer in charge. Payment for cement, reinforcement
and shuttering shall be paid extra
192061 Providing and laying in position machine mixed, ma etc., - 1 cum 2037.77
Abutment & Pier
192062 Providing and laying in position machine mixed, ma etc., - 1 cum 2134.80
Wing wall and Return wall
192063 Providing and laying in position machine mixed, ma etc., - 1 cum 2231.84
Abutment cap, Pier Cap, Inspection Platform & Pedestal
over Pier cap, Fender wall, Diaphragm wall, etc.
192064 Providing and laying in position machine mixed, ma etc., - 1 cum 2328.88
Approach slab at formation level, Dirt wall/
ballast wall at formation level
192065 Providing and laying in position machine mixed, ma etc., - 1 cum/m height 33.37
Extra for every increase of 1 M or part thereof in the
height above 10 M & 20 M
192071 Providing, Driving and installing Bored cast in s etc., - 1 metre 10548.24
1500mm diameter
192072 Providing, Driving and installing Bored cast in s etc., - 1 metre 6990.52
1200mm diameter
192073 Providing, Driving and installing Bored cast in s etc., - 1 metre 5748.11
1000mm diameter
192074 Providing, Driving and installing Bored cast in s etc., - 1 metre 3670.56
800mm diameter
192075 Providing, Driving and installing Bored cast in s etc., - 1 metre 2454.06
600mm diameter
192080 Providing, fabricating and installing of casing pipe for 1 MT 58759.29
bored piles for all diameters with specified thickness of
steel plate including all labour, materials, pumping and
bailing out water where ever required, complete as per
technical specifications as directed by Engineer in charge.
This will include the weight of plate only and no
cognizance will be given for the fittings i.e. rivets and
welding etc.
192091 Extra for chieselling in addition to boring of etc., - 1200mm 1 metre 1564.94
Diameter pile
192092 Extra for chieselling in addition to boring of etc., - 1000mm 1 metre 1195.44
Diameter
192093 Extra for chieselling in addition to boring of etc., - 800mm 1 metre 904.19
Diameter
192094 Extra for chieselling in addition to boring of etc., - 600mm 1 metre 586.85
Diameter
192111 Lateral load testing of single pile in accordance etc., - 1 Each 15093.69
Piles with lateral load capacity of Up to 10 ton
192112 Lateral load testing of single pile in accordance etc., - 1 Each 23624.91
Piles with lateral load capacity of above 10 ton & Up to 20
ton
192113 Lateral load testing of single pile in accordance etc., - 1 Each 42394.65
Piles with lateral load capacity of above 20 ton
192120 Pulse Echo Test (PET) for integrity testing of piles with 1 Each 26133.75
contractor’s men, materials and machines. The rate
includes cost of Inspection of site, preparation of pile head
and any other unforeseen cost required for the test,
submission of reports in triplicate as per satisfaction of the
Engineer in Charge at site
WELL FOUNDATION 1
193011 Earth work in OPEN excavation in foundation of bri etc., - 1 cum 76.37
Extra to item for Earth work in excavation over item no.
193010 if the excavation is carried out in Rock not
requiring blasting
193012 Earth work in OPEN excavation in foundation of bri etc., - 1 cum 227.21
Extra for Earth work in excavation over item
193010 if the excavation is carried out requiring controlled
blasting or chieselling where required and permitted by
the engineer in charge
193020 Providing and constructing Temporary Earthen Island / 1
coffer dam for construction of well foundations, including
bailing and pumping out of water, provision of sand bags,
wooden ballies, sheet piling, earth, sand or any other
suitable material, in water depth upto 1.5m, as required
with all labour and material complete job
193021 Providing and constructing Temporary Earthen Isla etc., - 1 Each 37305.40
For well size (longest dimension) upto 10 M
193022 Providing and constructing Temporary Earthen Isla etc., - 1 Each 190310.33
For well size (longest dimension) above 10 M
193041 Dry/Wet Sinking of Circular Wells (Other than pne etc., - 1 cum 59.08
From initial level of cutting edge & Up to 3m depth
193042 Dry/Wet Sinking of Circular Wells (Other than pne etc., - 1 cum 92.65
From 3m to 10m depth
193043 Dry/Wet Sinking of Circular Wells (Other than pne etc., - 1 cum 139.95
From 10m to 20m depth
193044 Dry/Wet Sinking of Circular Wells (Other than pne etc., - 1 cum 324.51
From 20m to 30 m depth
193045 Dry/Wet Sinking of Circular Wells (Other than pne etc., - 1 cum 825.57
From 30m to 40 m depth
193046 Dry/Wet Sinking of Circular Wells (Other than pne etc., - 1 cum 2100.24
From 40m to 50 m depth
193047 Dry/Wet Sinking of Circular Wells (Other than pne etc., - 1 cum 5343.01
From 50 m depth onwards
193051 Dry/Wet Sinking of Twin D type Wells (Other than etc., - 1 cum 92.29
From initial level of cutting edge & Up to 3m depth
193052 Dry/Wet Sinking of Twin D type Wells (Other than etc., - 1 cum 155.43
From 3m to 10m depth
193053 Dry/Wet Sinking of Twin D type Wells (Other than etc., - 1 cum 234.78
From 10m to 20m depth
193054 Dry/Wet Sinking of Twin D type Wells (Other than etc., - 1 cum 538.24
From 20m to 30 m depth
193055 Dry/Wet Sinking of Twin D type Wells (Other than etc., - 1 cum 1356.36
From 30m to 40 m depth
193056 Dry/Wet Sinking of Twin D type Wells (Other than etc., - 1 cum 3418.03
From 40m to 50 m depth
193057 Dry/Wet Sinking of Twin D type Wells (Other than etc., - 1 cum 8613.43
From 50 m depth onwards
193060 Extra for sinking of wells in hard rock requiring controlled 1 cum 349.69
blasting including cost of explosive, detonators,
chieselling including all other ancillary works
193072 Providing and laying in position machine mixed, ma etc., - 1 cum 1940.73
In Steining of wells
193073 Providing and laying in position machine mixed, ma etc., - 1 cum 2443.89
In Bottom plug for wells incl. arrangements for placing
concrete under water with tremie or bottom opening skips
193074 Providing and laying in position machine mixed, ma etc., - 1 cum 2810.47
In Intermediate/top plug without shuttering
193075 Providing and laying in position machine mixed, ma etc., - 1 cum 2810.47
In Intermediate/Top plug with internal shuttering
193076 Providing and laying in position machine mixed, ma etc., - 1 cum 2810.47
In Well cap and corbel if provided
193080 Supplying and filling ordinary sand/ excavated river bed 1 cum 764.99
material, if approved in between bottom plug and top plug
in wells including all lead lift handling, re handling, as a
complete job. The sand should be simultaneously filled
with water for three days to achieve full compaction so
that further chances of shrinkage due to voids are
eliminated. Note - If sand is brought from a source other
then bridge site it shall be paid as NS item
RCC BOX 1
194010 Providing and laying in position machine mixed, machine 1 cum 1940.73
vibrated and machine batched Design Mix Cement
Concrete M35 grade (Cast - in Situ) In Bottom/top slab,
side walls, toe wall and sumps haunch filling head walls or
any other component using 20 mm graded crushed stone
aggregate and coarse sand of approved quality of cast-in-
situ RCC box of size upto 5 M (bigger inside dimension)
including finishing, Admixtures in recommended
proportions (as per IS 9103), if approved in Mix design, to
accelerate, retard setting of concrete, improve workability
without impairing strength and durability, complete as per
drawings and technical specifications as directed by
Engineer in charge. Payment for cement, reinforcement
and shuttering shall be paid extra
194020 Providing and laying in position machine mixed, machine 1 cum 1940.73
vibrated and machine batched Design Mix Mass Cement
Concrete M20 grade (Cast - in Situ) using 20 mm graded
crushed stone aggregate and coarse sand of approved
quality in Drop and curtain wall and alike structures below
bed level, Including the cost of centring, shuttering and
finishing complete as per drawings and technical
specifications as directed by Engineer. Payment for
cement & reinforcement shall be paid extra
MISCELLANEOUS 1
195010 Deduct if 40mm graded stone aggregate is used in place 1 cum 406.53
of 20mm graded stone aggregate in any grade of
concrete. (Deduction to be made for quantity of concrete)
195020 Providing and applying two coats of coal tar or bitumen 1 Sqm 98.90
confirming to IS 3117 - 1965 on the top and sides of RCC
box/slabs @ 1.70 Kgs / Sqm after cleaning the surface
with all labour and materials complete job as directed by
the Engineer
195031 Centring and shuttering including strutting, etc., - RCC raft 1 Sqm 132.50
foundation & Pile cap
195035 Centring and shuttering including strutting, etc., - In well 1 Sqm 231.30
Kerb & Steining
195037 Centring and shuttering including strutting, etc., - In Well 1 Sqm 132.50
cap and corbel if provided
195041 Providing and laying in position machine mixed, ma etc., - 1 metre 64.47
Drilling 32 mm dia holes for jacketing
195042 Providing and laying in position machine mixed, ma etc., - 1 metre 4.79
Inserting of dowel bars of specified dia. (cost of rods to be
paid extra)
196010 1
196020 1
196030 1
196040 1
196050 1
196060 1
196070 1
196080 1
196090 1
196100 1
CHAPTER - 20 : BRIDGE WORKS – 1
SUPERSTRUCTURE : RCC
201011 Providing and laying in position Design Mix Ceme etc., - 1 cum 2305.02
With Soffit level Upto 9 m above Bed level
201012 Providing and laying in position Design Mix Ceme etc., - 1 cum 2368.00
With Soffit level From 9m above Bed Level to12m above
Bed Level
201013 Providing and laying in position Design Mix Ceme etc., - 1 cum 2430.99
With Soffit level From 12 m above Bed Level to 15m
above Bed Level
201014 Providing and laying in position Design Mix Ceme etc., - 1 metre/ cum or 31.49
Extra for increase in span by every 1 M or part thereof for part there
spans above 18.3 M & upto 30.5 M of
201015 Providing and laying in position Design Mix Ceme etc., - 1 cum 125.97
Deduct for casting of Slab instead of Girders
(for any heights)
201020 Providing and laying in position machine mixed, machine 1 cum 2116.06
vibrated and machine batched Design Mix Cement
Concrete M40 grade using
20 mm graded crushed stone aggregate and coarse sand
of approved quality for the Precast Prestressed (Post
tensioned) concrete girder/ Box (Spans upto 30.5 M) in
contactor’s casting yard, including finishing, using
Admixtures in recommended proportions (as per IS 9103),
if approved in Mix design, to accelerate, retard setting of
concrete, improve workability without impairing strength
and durability, complete as per specifications and
direction of the Engineer Payment for Shuttering,
Cement, Admixtures, reinforcement, HTS cables,
anchorage cones, stressing of cables and grouting of the
ducts will be done extra. Launching of girder/slab in
position is not included in this item-
201021 Providing and laying in position machine mix etc., - 1 cum 125.97
Deduct for casting of Slab instead of
Girder/Box
201030 Providing and laying in position machine mixed, machine 1 cum 2116.06
vibrated and machine batched Design Mix Cement
Concrete M 40 grade using 20 mm graded crushed stone
aggregate and coarse sand of approved quality for the
Precast Prestressed (Pre tensioned) concrete girder
(Spans upto 9.1 M) in contractor’s casting yard, including
finishing, using Admixtures in recommended proportions
(as per IS 9103), if approved in Mix design, to accelerate,
retard setting of concrete, improve workability without
impairing strength and durability, complete as per
specifications and direction of the Engineer. Payment for
Shuttering, Cement, Admixtures, reinforcement, HTS
cables, sheathing, anchorage cones, stressing of cables
and grouting of the ducts will be done extra. Launching of
girder/slab in position is not included in this item
201031 Providing and laying in position machine mix etc., - 1 cum 125.97
Deduct from 201030 for casting of Slab instead of Girder
201040 Design, manufacturing, Supplying and fixing in position 1 cu.cm. 1.38
elastomeric bearing pads under prestressed concrete
girder, for Pre-cast as well as cast-in-situ girders as per
approved drawing. The rate shall include cost of load test
of one No. bearing from Railway approved firms and all
fixing materials, equipments, machineries, labour, taxes,
loading, unloading, leading, lifting etc. complete. Rates
include getting the drawing approved from Railway and
cost of inspection during manufacturing from railway
approved organization. (Note :
1. The rate is for finished item complete and paid only
after fixing in position below the girder. 2. The volume
shall be given in the drawing and no deduction shall be
made for inserted steel plates etc.)
201051 Providing and fixing in position of standard pref etc., - For 1 metre 18873.28
80 mm expansion
201052 Providing and fixing in position of standard pref etc., - For 1 metre 25151.68
120 mm expansion
201053 Providing and fixing in position of standard pref etc., - For 1 metre 31439.49
160 mm expansion
201061 Load testing of one or more spans of bridge as sel etc., - 1 Each 67711.88
For Span design load upto 100 MT
201062 Load testing of one or more spans of bridge as sel etc., - 1 Each 66793.50
Extra for every increase of 100 MT or part thereof in the 100 MT
span load capacity upto 800 MT
201070 Providing, fabricating & fixing in position to exact design 1 MT 113357.10
profiles, prestressing H.T.S. cables of all classification
made from Low Relaxation strands conforming to IS
14268 –
1995 in Prestressed Concrete girders/slabs etc. including
supplying, cutting, making into cables with necessary
spacers, colour coding, protecting with water soluble oil at
all time, anchoring of cables, supplying and placing spiral
corrugated type galvanized metal steel ducts sheathing
made up of Cold Rolled Cold Annealed (CRCA) mild steel
conforming to IS
513 of required diameter/thickness, vent pipe, placing,
bending, routing, fixing, stressing & grouting of cable
ducts with cement grout, Anchorage sets in required
number with provision for future prestressing, if any,
including all lead and lift with contractor’s own materials,
labour, equipments, etc. complete as per drawings &
specifications. Rate also includes covering anchorage
pads with epoxy mortar of approved quality to avoid
corrosion. Cement for grouting to be paid separately
202010 1
202020 1
202030 1
202040 1
202050 1
202060 1
202070 1
202080 1
202090 1
202100 1
211013 Supplying of all types of structural steel conform etc., - 1 Sqm 9.34
Extra for metalising incl. preparation of surface and
applying one coat etch primer to 1S-5666
211060 Providing and fixing 65/50 mm nominal dia B class G.I. 1 Kg 59.43
pipe railing used in rows for footpath or anti-crash barrier
railing incl. cost of M.S. angle and channels in vertical
posts, riveting, welding / rivetting, priming painting two
coats,
211080 Providing/ fixing/ leaving/ grouting various size HTS bolts / 1 Kg 70.01
holding down bolts in concrete column or in other
structural steel member with proper nuts, bolts,
washers /plates as a complete job. Note - Cement used in
grouting will be paid
211100 Supplying, fitting and fixing in position true to line and 1 MT Bearing 364.05
level cast steel rocker bearing complete as per IS : Capacity
7666, IS:9565, IS:1030, IS:919, IS:3073 and as per
Bridge Code including all accessories as per drawing and
Technical Specifications
211110 Supplying, fitting and fixing in position true to line and 1 MT Bearing 485.02
level forged steel roller bearing conforming complete as Capacity
per IS : 7666, IS:9565, IS:1030, IS:919, IS:3073 and as
per bridge code including all accessories as per drawing
and Technical Spec
211120 Supplying, fitting and fixing in position true to line and 1 MT Bearing 669.89
level sliding plate bearing with PTFE Surface sliding on Capacity
stainless steel as per BS: 3784, BS 5400.complete
including all accessories as per drawing and Technical
Specifications
211130 Design, Supplying, fitting and fixing in position true to line 1 cu cm 1.20
and level elastomeric bearing conforming to IS:3400,
IS:226, BS 5400 complete including all accessories as per
drawing and Technical Specifications
211141 Supplying, fitting and fixing in position true to etc., - POT- 1 MT Bearing 472.71
PTFE Bearing Capacity
211142 Supplying, fitting and fixing in position true to etc., - POT 1 MT Bearing 381.29
Bearing Capacity
211143 Supplying, fitting and fixing in position true to etc., - PIN 1 MT Bearing 243.98
Bearing Capacity
211160 Supply & applying two coats of bitumen emulsion 1 Sqm 111.56
conforming to IS 3117 - 1965 on the top surface of steel
deck slab (New bridges)@ 1.70 kg per sqm after cleaning
surface with all materials, labour, tools and plants,
equipment etc. complete.
211170 Painting steel works (New bridges) with two cover coats of 1 Sqm 89.48
red oxide paint conforming to IS 123-62 as per IRS- B1-
2001 to given an even shade with all labour & material
including scaffolding, shuttering and strutting along with
provision of
211181 Providing road crane of different capacity with d etc., - 1 day 4785.38
12MT capacity with 36 feet jib
211182 Providing road crane of different capacity with d etc., - 25 1 day 8135.15
MT capacity with 60 feet jib
211183 Providing road crane of different capacity with d etc., - 40 1 day 23926.90
MT capacity with 75 feet jib
211184 Providing road crane of different capacity with d etc., - 75 1 day 50246.49
MT capacity with 75 feet jib
211185 Providing road crane of different capacity with d etc., - 100 1 day 75369.74
MT capacity with 75 feet jib
211186 Providing road crane of different capacity with d etc., - 150 1 Day 149543.13
MT capacity with 75 feet jib
211200 Cleaning of steel work of bridge triangulated girders with 1 Sqm 30.36
scrappers and/or wire brushes to remove all rust and
loose or perished paint to prepare perfectly clean & dry
bare metal surface free from all dirt/foreign material
& ready for initial coat of
211210 Painting cleaned bridge plate girders including all 1
scaffolding, shuttering and strutting along with provision of
Jhoola / hanging scaffolding where required
211211 Painting cleaned bridge plate girders includ etc., - With 1 Sqm 24.01
one coat. ready mix red lead conforming to IS :
102
211212 Painting cleaned bridge plate girders includ etc., - With 1 Sqm 37.53
one coat ready mix Zinc Chromate conforming to IS : 104
followed by one coat of Zinc Chromate red oxide
conforming to IS: 2074
211213 Painting cleaned bridge plate girders includ etc., - With 1 Sqm 36.72
two coats. ready mix red oxide conforming to
IS:123
211214 Painting cleaned bridge plate girders includ etc., - With 1 Sqm 39.15
two coats Aluminium paints in dual containers conforming
to IS : 2339
211215 Painting cleaned bridge plate girders includ etc., - With 1 Sqm 69.29
two coats epoxy paint
211221 Painting cleaned bridge girders exceeding 30.50 m etc., - 1 Sqm 27.00
With one coat. ready mix red lead conforming to IS :
102
211222 Painting cleaned bridge girders exceeding 30.50 m etc., - 1 Sqm 42.32
With one coat ready mix Zinc Chromate conforming to IS :
104 followed by one coat of Zinc Chromate red oxide
conforming to IS : 2074
211223 Painting cleaned bridge girders exceeding 30.50 m etc., - 1 Sqm 42.10
With two coats. ready mix red oxide conforming to IS :
123
211224 Painting cleaned bridge girders exceeding 30.50 m etc., - 1 Sqm 43.93
With two coats Aluminium paints in dual containers
conforming to IS : 2339
211225 Painting cleaned bridge girders exceeding 30.50 m etc., - 1 Sqm 74.08
With two coats epoxy paint
211231 Supply, fabrication and erection of bed etc., - Upto 12.2 m 1 Kg 222.38
clear span
211232 Supply, fabrication and erection of bed etc., - More than 1 Kg 277.98
12.2 m but upto 18.3 m clear span
211233 Supply, fabrication and erection of bed etc., - More than 1 Kg 333.58
18.3 m but up to 30.5 m clear span
212010 1
212020 1
212030 1
212040 1
212050 1
212060 1
212070 1
212080 1
212090 1
212100 1
CHAPTER - 22 : BRIDGE WORKS – 1
MISCELLANEOUS
221010 Providing and laying boulders apron on river bed for 1 cum 942.36
protection against scour with stone boulders weighing not
less than 35 kg each with the voids filled with spalls
complete as per drawing and Technical specification
221020 Laying of boulder apron laid in wire crates of approved 1 cum 297.53
size including overlaps at joints laid with stone boulders,
all loose ends to be tied with 4 mm galvanised steel wire.
Payment for boulders & wire crates to be done extra
221030 Supplying galvanized wire net trungers made from 4 mm 1 Sqm 219.83
galvanised steel wire @ 32 kg per
10 sqm having minimum tensile strength of
300 Mpa conforming to IS:280 and galvanizing coating
conforming to IS:4826, woven into mesh with double twist,
mesh size not exceeding 100 x 100 mm
221040 Providing and laying of apron with cement concrete blocks 1 cum 1860.13
cast in-situ and made with nominal mix of 1:2:4 with a
minimum cement content of 250 kg/cum. Payment to be
made for blocks only. Cost of cement and shuttering to be
paid extra
221050 Providing and laying Pitching with stone boulders 1 cum 1036.61
weighing not less than 35 kg each with the voids filled with
spalls on slopes laid over prepared filter media including
boulder apron laid dry in front of toe of embankment
complete as per drawing and Technical specifications
(Filter media to be paid separately under the relevant
item)
221060 Providing and laying Pitching with stone boulders 1 cum 1617.53
weighing not less than 35 kg each with the voids filled with
cement sand mortar
1:4 on slopes laid over prepared filter media including
boulder apron laid dry in front of toe of embankment
complete as per drawing and Technical specifications
(Filter media to be paid separately under the relevant
item)
221070 Providing and laying Filter material As Per RDSO 1 cum 1932.31
Specifications underneath pitching in slopes complete as
per drawing and Technical specification
221081 Providing & Laying of a Permeable geotextile filte etc., - 1 Sqm 29.63
With GJT-Type 1 (For Harsh conditions)
221082 Providing & Laying of a Permeable geotextile filte etc., - 1 Sqm 35.77
With GJT-Type 2 (For less severe conditions)
221083 Providing & Laying of a Permeable geotextile filte etc., - 1 Sqm 48.48
With GJT-Type 3 (For moderate conditions)
221090 Laying boulder apron on river bed for protection against 1 cum 95.18
scour with stone boulders supplied by railways with the
voids filled with spalls complete as per drawings and
technical specifications. With maximum lead upto
150m
221100 Laying pitching with stone boulders supplied by the 1 cum 144.04
railways with the voids filled with spalls on slopes laid over
prepared filter media including boulder apron laid dry in
front of toe of embankment as per drawings and technical
specifications. Max lead upto
150m (Filter media to be paid under the relevant item)
Flooring in Bridges 1
222010 Providing and laying Flooring with rubble stone , laid over 1 cum 1613.35
15 cm thick CC 1:2:4 and the voids filled with CC 1:2:4
complete with the joints pointed with 1:2 Cement sand
mortar as per drawing and Technical specifications.
Payment for cement to be done separately. Voids in the
rubble stone to be taken as 35% of the gross volume of
the stone layer. (Base concrete to be paid extra)
222020 300 mm thick (average) Dry stone flooring with boulders 1 cum 1002.95
of not less than 35 kg each in weight , hand packed with
surface levelled off to the correct section with hammer
dressing as necessary on the ground including filling the
gaps with quarry spalls and ordinary sand complete
including the cost of supply of all materials, labour, lead,
lift, tools, plants, crossing of tracks and the like as per
drawing and technical specification as directed by
Engineer
222030 Supply and laying of quarry dust including consolidation, 1 cum 701.70
supply of all materials, labour, lead, lift, tools, plants,
crossing of tracks as per drawing and technical
specification as directed by the Engineer incharge in case
loose slush is encountered at site of foundation before
casting the foundation or before laying the filtering media
222040 Supply and laying of coarse sand including consolidation, 1 cum 1083.60
supply of all materials, labour, lead, lift, tools, plants,
crossing of tracks as per drawing and technical
specification as directed by the Engineer incharge in case
loose slush is encountered at site of foundation before
casting the foundation or before laying the filtering media
222050 Guniting concrete surface with cement mortar of average 1 Sqm 447.74
thickness 25mm, applied with compressor after cleaning
surface and spraying with epoxy complete as per
Technical Specification in the ratio of 16 Kg of cement to
0.04 cum of sand,
50X50X3mm size wire mesh, with 0.67 Kg of epoxy and
0.64 Kg of accelerator compound for guniting per Sqm
222060 Providing and inserting nipples with approved fixing 1 Each 32.39
compound after drilling holes for grouting as per Technical
Specifications including subsequent cutting/removal and
sealing of the hole as necessary after completion of
grouting
222090 Applying epoxy mortar over leached, honey combed and 1 Sqm 893.30
spalled concrete surface and exposed steel reinforcement
complete as per Technical Specification with average
thickness of 10 MM including priming coat, mortar plaster
and seal coat of epoxy
222120 Providing & applying Epoxy for bonding of new concrete 1 Sqm 139.27
to old concrete @ 0.80 Kg / sqm with pot life not less than
60-90 minutes and as per specifications including
cleaning the surface
222130 Providing & Fixing 12 mm rabbit wire mesh at the junction 1 Sqm 101.75
of RCC where specifically ordered or as shown in the
drawing
222150 Providing/ fixing/ grouting various size HTS holding down 1 Kg 103.82
bolt in concrete column or in other structural steel member
incl. drilling holes of required size, bolts threaded at both
ends shall be fixed with proper size nuts bolts, plates,
washers complete including all labour and material
222180 Providing and laying of filter media consisting of granular 1 cum 1102.53
materials of GW, GP, SW groups as per IS 1498-1970 in
required profile behind boulder filling of abutments, wing
walls / return walls etc above bed level with all labour and
material complete job as per drawing and technical
specification of RDSO Guidelines
222191 Removing all loose concrete, cleaning rust wit etc., - 20 1 Sqm 1096.07
mm. thick polymer mortar
222192 Removing all loose concrete, cleaning rust wit etc., - 20- 1 Sqm 943.05
50 mm. thick polymer concrete
222211 Supplying and changing of corroded worn-out and lo etc., 1 Each 133.09
- Rivetts size upto 25 mm dia.
222212 Supplying and changing of corroded worn-out and lo etc., 1 Each 225.81
- For Rivets more than 25 mm dia.
222220 Dismantling of existing bed plate from existing bed block 1 Each 4380.49
by cutting & removal of HD bolts and nuts with all tools, Plate
plants, machinery scaffolding, labour and other materials
and shiting it at one end of the bridge during traffic block.
222230 Painting the HFL and danger level marks, year of HFL on 1 Each 109.96
bridge abutments and piers with ready mixed paint as per Mark
standard in two coats over one coat of primer with all
materials, labour, tools, scaffolding, all lead and lift etc
including writing complete
222240 Providing cast in situ bridge number plaques as per 1 Each 393.19
Railway drawing in cement concrete
1:2:4 mix using 20mm hard stone aggregate embedded in
30mm notch in Bridge parapet coping duly engraving the
letter and figures and an arrow indicating the direction of
flow and finishing the top exposed surface with cement
mortar 1:3, painting letters and figures with two coats of
black enamel paint on two coats of white back ground with
all labour, tools, cement, paint etc.with all lead and lifts
222250 Providing cast in situ plaques for bridge foundations 1 Each 518.99
details of size 45x45x5 cm in cement concrete 1:2:4 mix
using 20mm hard stoneaggregate embedded in 30mm
deep notch over abutment & piers, engraving the letters &
figures with CM 1:3 and finished smoth including painting
letters and figures with 2 coats of black enamel and
plaque with white enamel with all labour, tools, cement,
paint, curing, etc. as a complete job
222261 Providing & laying non pressure NP-4 Class 1 metre 1591.76
RCC p etc., - 600 mm dia.
222262 Providing & laying non pressure NP-4 Class 1 metre 2467.40
RCC p etc., - 900 mm dia.
222263 Providing & laying non pressure NP-4 Class 1 metre 3074.93
RCC p etc., - 1000 mm dia.
222264 Providing & laying non pressure NP-4 Class 1 metre 3820.53
RCC p etc., - 1200 mm dia.
222280 Supplying, spreading and filling coarse sand (No cohesive 1 cum 1002.14
materials to be used) of approved quality including
watering and ramming in foundation, plinth, behind the
abutment, wing wall, retaining wall in layers not exceeding
150mm thick including its compaction as per direction of
Engineer-in- charge. The rate includes all lead, lift, ascent,
descent, crossing of Railway line, etc. complete with
contractor’s labour, materials, tools and plant
222290 Providing Boulder backing behind wing wall, return wall, 1 cum 164.52
retaining wall with hand packed boulders & cobbles with
smaller size boulders toward the back including all lead,
lift, labour
& other incidental charges as complete work in all respect.
Payment for boulder/cobbles will be done extra
222310 Supplying & fixing Galvanised Steel wire ropenet, made of 1 Sqm 540.22
9mm dia steel wire rope having aperture size of 45cm x
60cm with
6m long hangs for top anchoring and 5m wide alongwith
chain-link mesh-netting of
80mm x 80mm mesh size made from 2.4mm dia
galvanised wire, joining of chain-link mesh & steel wire
ropenet and joining of adjacent nets with galvanised spiral
lock springs of steel wire dia 2.2mm; inner dia of springs
18mm; total length 50mm ± 0.5mm; pitch 4mm & open
end length 60mm including cutting of tree/shrub etc. in
rope- netting location and also, excavation / filling-back of
trenches in all types of soil after anchoring ropenet with
RCC pre-cast beam of size
15cm x 15cm x 2m of M-15 concrete & 30cm thick M-10
PCC. This work also includes supply of 200mm x 200mm
x 6mm epoxy coated washer plates with 12.5mm / 18mm
dia hole at centre and supplying & fixing of anchor
bolts/fastners of 10mm dia including drilling of holes upto
a depth of 110mm in rock; cleaning of holes; fixing of
fastners with nut & epoxy coated washer plates; - applying
torque 65 to 70 N/mm for fixing of ropenet for intermediate
anchoring on the surface of cutting, bottom anchoring
upto 1m depth by using 16mm dia HYSD steel bolts,
threaded upto 200mm on top and fixing epoxy coated
washer plate, fabrication & fixing of U-pin on top of cutting
for top anchoring and joining of adjacent nets with spiral
spring and fixing at the ratio of 1 no. per 0.6m in
longitudinal direction of net portion and additional locks for
lacing chain link netting with ropenet with contractor's
222320 Supplying & fixing of Erosion Control Geomat (for 1 Sqm 175.62
surfacial erosion control) consisting of 2 layers of
polymeric netting, having aperture size of 20mm x 20mm
and a middle layer of coir as per Specifications. Max.
width of rolls/each composite mat shall be 5m. Work
includes dressing of slopes to proper profile & removing
loose rubbles, muck & leading to the point as directed by
engineer-incharge; supply & spreading of good earth/soil
material on slope/berm portion etc. to proper profile for
laying of Geomat anchoring in top anchor trench; seaming
of adjacent panels of Geomat with HDPE Twine;
fabrication & fixing of U-pin on slope/berms including top
of cutting for anchoring of Geomat as per approved
scheme and providing of grass sods and placing over
Geomat so as to completely cover it, including watering
for 2 weeks with all labour, tools & materials alongwith
lead & lift etc. complete
222351 Surface protection of Piers, substructure, Box bri etc., - 1 Sqm 418.52
Piers, substructure, Box bridges and culverts in river bed
222352 Surface protection of Piers, substructure, Box bri etc., - 1 Sqm 366.93
Sidewalks
223010 1
223020 1
223030 1
223040 1
231030 Providing and laying each layer of flat brick soling hand 1
packed and joints filled with ordinary sand
231031 Providing and laying each layer of flat bri etc., - With well 1 Sqm 135.23
burnt bricks. Class 7.5 designation
231032 Providing and laying each layer of flat bri etc., - With 1 Sqm 108.40
Jhama bricks
231042 Providing and laying water bound macadam with spec 1 cum 1228.11
etc., - Base course with 63mm to 45mm size including
stone screening 13.2mm size
231043 Providing and laying water bound macadam with spec 1 cum 1286.18
etc., - Base course with 53mm to 22.4mm size including
stone screening 11.2mm size
231051 Providing and laying water bound macadam sub- base 1 cum 569.59
etc., - Over burnt (Jhama) brick aggregate 120mm to
40mm
231052 Providing and laying water bound macadam sub- base 1 cum 575.40
etc., - Over burnt (Jhama) brick aggregate 90mm to
45mm
231061 Providing and laying bitumen penetration etc., - For 50mm 1 Sqm 346.86
compacted thickness using 6cum coarse aggregate of
size 50-20mm graded,
1.5cum key aggregate of size 12.5mm graded, and 500kg
paving asphalt 80/ 100 per 100sqm
231062 Providing and laying bitumen penetration etc., - For 75mm 1 Sqm 494.20
compacted thickness in two layers using 9cum coarse
aggregate of size 63-41mm graded, 1.8cum key
aggregate of size 20mm graded, and 680kg paving
asphalt 80/ 100 per
100sqm
SURFACE DRESSING : 1
232010 Surface dressing on new surface with paving bitumen of 1 Sqm 148.40
grade A-90/ S-90 of approved quality using 2.25 kg of
bitumen. per sqm with 1.65 cum of stone chippings
13.2mm nominal size per
100 sqm of road surface including consolidation with road
roller of 6 to 8 tonne capacity etc. complete
232020 Surface dressing on new surface in two coats with 1 Sqm 198.38
bitumen of grade A-90/ S-90 of approved quality using
1.8kg. of bitumen per sqm with
1.5cum of stone chippings 13.2mm nominal size per 100
sqm of road surface for 1st coat and
1.1kg of bitumen per sqm with 1.00cum of stone chippings
11.2mm nominal size per 100sqm of road surface for 2nd
coat including consolidation of each coat separately with
road roller of 6 to 8 tonne capacity etc. complete
232030 Surface dressing on old surface with hot bitumen of grade 1 Sqm 123.55
A-90/ S-90 of approved quality using
1.95 kg of bitumen per sqm with 1.50 cum Stone
chippings 11.2mm nominal size per 100 sqm of road
surface including consolidation with road roller of 6 to 8
tonne capacity etc. complete
232040 Surface dressing one coat on new surface with bitumen 1 Sqm 127.61
emulsion (minimum 50% bitumen content- RS grade
conforming to IS: 8887) at a rate of 1.95kg/sqm of surface
area with 1.5cum of stone chippings 13.2mm nominal size
per 100 sqm of road surface including consolidation with
road roller of 6 to 8tonne capacity etc. complete
232050 Surface dressing one coat on old surface with bitumen 1 Sqm 80.78
emulsion (minimum 50% bitumen content- RS grade
conforming to IS: 8887) at the rate of 1.22kg/ sqm of
surface area with
1.11cum of stone chippings 11.2mm nominal size per 100
sqm of road surface including consolidation with road
roller of 6 to 8tonne capacity etc. complete
233012 Providing and applying tack coat using bitumen em etc., - 1 Sqm 16.03
On bituminous surface @ 0.25kg/ sqm
233021 Providing and laying 2cm premix carpet surfacing w etc., - 1 Sqm 119.40
With paving asphalt 80/ 100 heated and then mixed with
solvent at the rate of 70grams per kg. of asphalt
233022 Providing and laying 2cm premix carpet surfacing w etc., - 1 Sqm 114.04
With paving asphalt 60/ 70 with no solvent
233023 Providing and laying 2cm premix carpet surfacing w etc., - 1 Sqm 133.64
With refinery modified bitumen CRMB 55 conforming to
IRC: SR: 53- 1999
233031 Providing and laying 2.5cm premix carpet etc., - With 1 Sqm 146.40
paving asphalt 80/ 100 heated and then mixed with
solvent at the rate of 70grams per kg. of asphalt
233032 Providing and laying 2.5cm premix carpet etc., - With 1 Sqm 140.80
paving asphalt 60/ 70 with no solvent
233033 Providing and laying 2.5cm premix carpet etc., - With 1 Sqm 164.21
refinery modified bitumen CRMB 55 conforming to IRC:
SR: 53- 1999
233040 Providing and laying 2cm premix carpet surfacing with 1 Sqm 145.99
2.4cum of stone chippings 11.2mm nominal size and
230kg bitumen emulsion (medium setting min. 65%
bitumen content) complying with IS: 8887- 1995 per
100sqm including consolidation with road roller of 6 to
8tonne capacity etc. complete
233050 Providing and laying 2.5cm premix carpet surfacing with 1 Sqm 180.89
3cum of stone chippings 10mm nominal size and 288kg
bitumen emulsion (medium setting min. 65% bitumen
content) complying with IS: 8887- 1995 per 100sqm
including consolidation with road roller etc. complete
234011 2.5 cm thick bitumastic sheet with hot bitumen of etc., - 1 Sqm 206.80
With paving bitumen 80/ 100 heated and then mixed with
solvent at the rate of 70grams per kg. of asphalt
234012 2.5 cm thick bitumastic sheet with hot bitumen of etc., - 1 Sqm 197.68
With paving bitumen 60/ 70 with no solvent
234013 2.5 cm thick bitumastic sheet with hot bitumen of etc., - 1 Sqm 224.98
With refinery modified bitumen CRMB 55 conforming to
IRC: SR: 53- 1999
234021 4cm thick bitumastic sheet with hot bitumen of app etc., - 1 Sqm 320.86
With paving bitumen 80/ 100 heated and then mixed with
solvent at the rate of 70grams per kg. of asphalt
234022 4cm thick bitumastic sheet with hot bitumen of app etc., - 1 Sqm 305.95
With paving bitumen 60/ 70 with no solvent
234023 4cm thick bitumastic sheet with hot bitumen of app etc., - 1 Sqm 368.24
With refinery modified bitumen CRMB 55 conforming to
IRC: SR: 53- 1999
SEAL COAT : 1
235010 Providing and laying seal coat of premixed fine aggregate 1 Sqm 58.20
(passing 2.36mm and retained on
180micron sieve) with bitumen using 128 kg of bitumen of
grade 80/ 100 bitumen and 0.60cum of fine aggregate per
100sqm of road surface including rolling and finishing with
road roller all complete. Note - This should not be
operated along with Hot mix carpeting
CONCRETE PAVEMENTS : 1
236010 Cement concrete Grade M15 of coarse aggregate 1 cum 1876.03
40mm nominal size, in pavements, laid to required slope
and camber in panels as required including consolidation
finishing and tamping complete
236020 Providing and laying design mix cement concrete in 1 cum 2488.24
roads, having a cube strength of M-30 using cement,
coarse sand and graded stone aggregate of 40mm
nominal size as per approved design. mechanically
vibrated, steel form work, curing, providing and filling
construction & dummy joints with approved joint filler
(conforming to grade B of IS: 1834) rounding of the
edges, making & filling the
236030 Providing and fixing at or near ground level factory made 1 Sqm 544.24
RCC pavement slab of M-30 grade of size
450x450x50mm with reinforcement of
6mm dia M.S. bars 4 nos. on each side including setting
in position in footpath to the required level and line over a
bed of 20 mm average thick cement mortar (1 cement: 3
coarse sand) joint thickness not more than 5mm except
on curve including filling of joints with same cement
mortar and making grooves etc. complete as per direction
of Engineer-in-charge
236040 Extra over item236010 & 236020 for providing and mixing 1 litre 50.53
hardening compound of approved quality as per
manufacturer’s specification
236050 Providing and fixing in position pre-moulded joint filler in 1 per cm width 3.60
expansion joints per cm depth
/ metre
236060 Providing and laying in position bitumen hot sealing 1 per cm width 3.07
compound for expansion joints etc. using grade ‘A’ sealing per cm depth
compound / metre
236071 Painting road surface marking with adequate n etc., - New 1 Sqm 81.40
work (minimum two coats)
236072 Painting road surface marking with adequate n etc., - Old 1 Sqm 52.66
work (one or more coats)
MISCELLANEOUS : 1
237010 Providing and fixing Cat’s Eye (Glow studs) heavy integral 1 Each 481.42
stem, reflective, aluminium die cast with elegant finish of
size 100x100mm and
20mm high having a stem of 50mm (or 12mm dia. 90mm
long) screwed and nailed to fix into the road surface or at
the nosing of the central verge. The road studs should
have reflectors fitted on one side of the studs (3Nos. 7
element or 1No. 29 element reflector) complete
237020 Deduct for using hand roller instead of power road roller 1 Sqm 10% of
for consolidation, If due to site conditions the power road Basic Items
roller can not be used and use of hand roller is specifically
permitted in writing. 10% deduction is made on the total
unit cost of the item concerned
237030 Supplying and laying Kerb stone 30cm X 20cm (In Section 1 metre 988.97
/ including chamfering as per design if any) chisel dressed
on top and sides including fixing in 1:6 cement sand
mortar and pointing with 1:2 cement mortar (1cement:2
Sand ordinary) including all excavation / refilling, ramming
and other incidental works as required
237040 Supplying and laying Channel stone 30cmX 10 cm (In 1 metre 518.56
Section ) chisel dressed on top and sides including fixing
in 1:6 cement sand mortar and pointing with 1:2 cement
mortar (1cement:2
Sand ordinary) including all excavation/ refilling, ramming
and other incidental works as required
237050 Supplying and laying precast Kerb Stone of concrete M25 1 metre 361.76
Grade 30cmX 20 cm (In Section / including chamfering as
per design if any) including fixing in 1:6 cement sand
mortar and pointing with 1:2 cement mortar (1cement:2
Sand ordinary) including all excavation /refilling, ramming
and other incidental works as required.
237060 Supplying and laying precast Channel Stone of concrete 1 metre 204.96
M25 Grade 30cmX 10 cm (In Section) including fixing in
1:6 cement sand mortar and pointing with 1:2 cement
mortar (1cement:2
Sand ordinary) including all excavation /refilling, ramming
and other incidental works as required
237070 Providing and laying Dry Brick (FPS bricks of class 1 metre 68.27
designation 7.5) edging of full brick width and half brick
depth including excavation, refilling / ramming and
disposal of surplus earth lead upto 50 metres
237080 Providing and laying Dry Brick (FPS bricks of class 1 metre 19.41
designation 7.5) edging laid length wise with half brick
depth including excavation, refilling / ramming and
disposal of surplus earth lead upto 50 metres
237090 Providing and laying toothed (Diagonal) brick edging 1 metre 22.46
along paths etcat an angle of 60 Degree to the horizontal
including excavation, refilling / ramming and disposal of
surplus earth lead upto
50 metres
237120 Providing and laying Dry brick (F.P.S. bricks of class 1 metre 213.03
designation 7.5) pitching half brick thick in drains including
supply of brick and preparing the surface complete
237130 Cutting road and making good the same including supply 1
of extra quantities of materials i.e. aggregate, moorum
screening, red bajri, Bitumen, compaction, protection
during work, etc and labour complete
237131 Cutting road and making good the same etc., - Bituminous 1 cum 1414.25
portion
237132 Cutting road and making good the same etc., - Water 1 cum 674.75
bound macadam
237140 Cutting bajri paths and making good the same including 1 Sqm 30.33
supply of extra quantities of brick aggregate, moorum and
red bajri etc and labour with compaction, protection during
work complete
238011 Providing and laying Dense Bituminous macadam on etc., 1 Sqm 585.05
- 75 mm average compacted thickness with bitumen of
60/70 grade @ 5% by weight of total mix and lime filler @
2% by weight of Aggregate. (For very heavy traffic
condition)
238012 Providing and laying Dense Bituminous macadam on etc., 1 Sqm 454.00
- 75mm average compacted thickness with bitumen of
60/70 grade @ 3.5% by weight of total mix
238013 Providing and laying Dense Bituminous macadam on etc., 1 Sqm 389.93
- 50 mm average compacted thickness with bitumen of
60/70 grade @ 5% by weight of total mix and lime filler @
2% by weight of Aggregate. (For very heavy traffic
condition)
238014 Providing and laying Dense Bituminous macadam on etc., 1 Sqm 302.59
- 50mm average compacted thickness with bitumen of
60/70 grade @ 3.5% by weight of total mix
238021 Providing and laying Dense Bituminous concrete on etc., - 1 cum 8337.59
40 mm / 50mm compacted thickness with bitumen of
grade 60/70 @ 6.5% and lime @ 3% by weight of total
mix
238022 Providing and laying Dense Bituminous concrete on etc., - 1 cum 11503.65
40 mm / 50mm compacted thickness with bitumen of
grade CRMB (Crumb rubber Modified Bitumen) 60 @
5.5% and lime @ 3% by weight of total mix
238023 Providing and laying Dense Bituminous concrete on etc., - 1 cum 11081.53
40 mm /50mm compacted thickness with bitumen of
grade PMB-(Polymer Modified Binder Plastomeric
Thermoplastic) - 40 @ 5.5% and lime @3% by weight of
total mix
238032 Providing and laying bitumen mastic wearing c etc., - 40 1 Sqm 1066.20
mm thick
238050 Providing and applying 2.5mm thick road marking strips 1 Sqm 584.94
(retro-reflective) of specified shade/ colour using hot
thermoplastic material by fully/ semi automatic
thermoplastic paint applicator machine fitted with profile
shoe, glass beads dispenser, propane tank heater and
profile shoe heater, driven by experienced operator on
road surface including cost of material, labour, T&P,
cleaning the road surface of all dirt, seals, oil, grease and
foreign material etc. complete as per direction of
Engineer-in-charge and in accordance with applicable
specifications
238060 Providing and fixing of raised pavement markers made of 1 Each 659.14
polycarbonate moulded body and reflective panels with
micro prismatic lens made of polycarbonate with abrasion
resistant coating. The length, weight and width of body
shall not exceed 95 mm, 18mm and 105mm respectively.
The lower surface of the RPM shall be supported with two
nylon shanks, each of length not less than 25mm. Fixed to
the road by using twin nylon shanks using bituminous
adhesive on bitumen roads or without nylon shanks with
epoxy resin adhesive on concrete roads as per directions
of Engineer Incharge. The RPM should conform to the
quality standards as laid down in IR Standard
Specifications
239010 1
239020 1
239030 1
239040 1
239050 1
241013 Supplying at site - etc., - Precast R.C.C. standard posts 1 Each 533.21
(for palisade fencing) 1.8m long
241014 Supplying at site - etc., - Precast R.C.C. standard rails 1 Each 226.49
2.25 metre long (90mm x 50mm) as per IR Unified
Standard Specifications
241015 Supplying at site - etc., - Precast R.C.C. standard rails 1 Each 121.96
1.25 metre long (75mm x 50mm) as per IR Unified
Standard Specifications
241016 Supplying at site - etc., - Sal ballies of 30cm minimum 1 metre 139.38
girth
241021 Supplying at site - etc., - Welded steel wire fabric of 1 Sqm 455.41
required width rectangular mesh 75x25mm size, weight
not less than 7.75kg/ Sqm painted with two or more coats
of enamel paint of approved shade over a coat of primer
(painting to be paid for separately)
241022 Supplying at site - etc., - Chain Link fabric mesh of size 1 Sqm 476.93
50X50 mm size made of GI wire of 4 mm dia.
241023 Supplying at site - etc., - Chain Link fabric mesh of size 1 Sqm 501.44
50X50 mm size made of GI wire of 4 mm dia. PVC coated
to outer dia of 5 mm
242010 Providing 1.2m high fencing with 1.8m R.C.C. Post placed 1 metre 52.22
every 3m apart, embedded in cement concrete blocks,
every 15th post (or nearer if there is abrupt change of
ground slope), last but one end post and corner post shall
be strutted on both sides and end post one side only, and
struts embedded in cement concrete blocks, provided with
5 horizontal lines and two diagonals of G.I. barbed wire
9.38kg per 100metres (min) between the two posts fitted
and fixed with G.I. staples on turn buckles or G.I. binding
wire tied to 6mm bar nibs fixed while casting the post
(cost of posts, struts and concrete to be paid for
separately)
242020 Providing 1.2m high fencing with 1.8m Sal balli/Casurina 1 metre 63.35
ballies posts, 30cm girth (min) placed every 2.5m apart,
embedded in cement concrete blocks and every 15th post
(or nearer if there is abrupt change of ground slope) , last
but one end post and corner post shall be strutted on both
sides and end post one side only, and struts embedded in
cement concrete blocks, provided with 5 horizontal lines
and two diagonals of G.I. barbed wire 9.38kg per
100metres (min) between the two posts fitted and fixed
with G.I. staples driven into the posts including two coats
of coal tarring of ballies complete (cost of posts, struts,
and concrete to be paid for separately)
242030 Providing 1.8m high fencing with 2.5m sal balli posts, 1 metre 64.03
30cm girth (min) placed every 2.5m apart, embedded in
cement concrete blocks and every 15th post (or nearer if
there is abrupt change of ground slope) , last but one end
post and corner post shall be strutted on both sides and
end post one side only, and struts embedded in cement
concrete blocks, provided with 5 horizontal lines and two
diagonals of G.I. barbed wire 9.38kg per 100metres (min)
between the two posts fitted and fixed with G.I. staples
driven into the posts including two coats of coal tarring of
ballies complete (cost of posts, struts and concrete to be
paid for separately).
242040 Providing 2.4m high fencing with 3.3m sal balli posts, 1 metre 84.32
30cm girth (min) placed every 2.5m apart, embedded in
cement concrete blocks and every 15th post (or nearer if
there is abrupt change of ground slope) , last but one end
post and corner post shall be strutted on both sides and
end post one side only, and struts embedded in cement
concrete blocks, provided with 7 horizontal lines and two
diagonals of G.I. barbed wire 9.38kg per 100metres (min)
between the two posts fitted and fixed with G.I. staples
driven into the posts including two coats of coal tarring of
ballies complete (cost of posts, struts and concrete to be
paid for separately).
242050 Providing 1.2m high fencing with 1.8m angle iron 1 metre 52.22
40x40x6mm posts placed every 3m centre to centre
embedded in cement concrete blocks every 15th post (or
nearer if there is abrupt change of ground slope) last but
one end post and corner post shall be strutted on both
sides and end post on one side only, and struts
embedded in cement concrete blocks, and provided with 5
horizontal lines and two diagonals interwoven with
horizontal GI barbed wires, of barbed wire 9.38kg per 100
metre (min) between the two posts fitted and fixed with
G.I. staples, complete (cost of posts, struts and concrete
to be paid for separately).
242060 Providing 1.8m high fencing with 2.4m angle iron 1 metre 69.54
50x50x6mm posts placed every 3m centre to centre
embedded in cement concrete blocks every 15th posts (or
nearer if there is abrupt change of ground slope) last but
one end post and corner post shall be strutted on both
sides and end posts on one side only, and struts
embedded in cement concrete blocks, and provided with 7
horizontal lines and two diagonals interwoven with
horizontal GI barbed wires, of barbed wire 9.38kg per 100
metre (min) between the two posts fitted and fixed with
G.I. staples, turn buckles etc. complete (cost of posts,
struts and concrete to be paid for separately).
242070 Extra for supplying and fixing turn buckles and straining 1 Each 121.53
bolts for barbed wire fencing.
242080 Supplying and fixing of barbed wire weighing 1 per metre of 12.77
9.38 kg per 100 metre (min) on previously erected posts barbed wire
with wire nails, hooks, stitching bolts, binding wire etc.
straight and/or cross pattern. (Rate includes drilling of
holes in the post wherever required) Note: This item can
also be operated as extra over Items 242010 to
242060 for fixing additional wires to those stipulated in the
respective items.
242090 Erection of precast RCC/MS section/Sal balli post upto 2 1 Each 43.72
m height including excavation in all types of soil, filling
back loose earth and consolidating etc. complete for
making the post rigid. Concrete work in foundation to be
paid for separately.
242100 Providing 1.2m high welded steel wire fabric fencing 1 metre 18.97
/chain link fabric with 1.8m posts of specified material and
design placed at every
3m apart embedded in cement concrete blocks every 15th
post (or nearer as per site conditions), last but one end
post and corner post shall be strutted on both sides and
end post one side only and struts embedded in cement
concrete blocks, provided with welded steel wire fabric
0.90m wide rectangular mesh
75x25mm size weighting not less than 7.75kg/ Sqm. fixed
between the posts fitted and fixed with G.I. staples on
wooden plugs or tied to
6mm bar nibs with G.I. binding wire (cost of posts, struts
welded steel wire fabric, painting, and concrete to be paid
for separately)
242110 Fixing posts (M.S. angle/flat) of any shape over top of 1 Each 86.23
wall, including making holes in masonry and fixing posts
in cement concrete. (Cement Concrete to be paid
separately)
242120 Providing 1.3 metre high concrete rail and pale fencing of 1 metre 17.53
standard design with 1.8m R.C.C. posts 2.25m rails and
1.25m pales, posts placed at 2.25m apart (Cost of
concrete work, posts, rails and pales to be paid for
separately)
242130 Making tie bar/Boiler tube fencing from old tie bars/Boiler 1 quintal 488.91
tube, supplied by railway, including straightening, cutting,
drilling holes, rivetting/welding as per approved plan and
depositing the excess scrap in Railway stores. Note : Due
allowance for loss in standard weight of tie bars will be
made while making payments depending upon condition
of the tie bars/boiler tube.
242140 Fixing and setting chainage, bench marks, apex and TP 1 Each 26.23
stones in 1:2:4 RCC of approved design. (The pillars,
excavation, concrete etc. will be paid extra)
242150 Providing and fixing 15x15x90cm boundary stone of hard 1 Each 130.77
stone with 30cm chisel dressed on all four sides and on
top (cost of excavation, refilling and concrete etc to be
paid for separately)
242160 Extra over Item 242150 for engraving letters in hard stone 1 cm height 2.92
242171 Fixing Grade M-20, RCC Posts/Boards as per st etc., - 1 Each 26.23
Boundary Stones
242172 Fixing Grade M-20, RCC Posts/Boards as per st etc., - 1 Each 26.23
Kilometre Posts
242173 Fixing Grade M-20, RCC Posts/Boards as per st etc., - 1 Each 26.23
Hectametre Posts
242174 Fixing Grade M-20, RCC Posts/Boards as per st etc., - 1 Each 26.23
Gradient Boards
242180 Extra over Item 242170 for engraving letters in 1 cm height 3.51
RCC /letter
242190 Providing and fixing concertina coil fencing with required 1 metre 192.23
dia 600 mm having 50 nos. round per
6 m length upto 3m height of wall with existing angle iron
‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9
horizontal R.B.T. stud tied with G.I. staples and G.I. clips
to retain horizontal including necessary bolts or G.I.
barbed wire tied to angle iron all complete as per direction
of Engineer-in-charge with reinforced barbed tape (R.B.T.)
/ Spring core (2.5mm thick) wire of high tensile strength of
165 kg/ sq.mm. with tape (0.52 mm thick) and weight
43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be
paid separately)
242200 Providing & fixing half bamboo jafri without gap of 20 to 1 Sqm 431.18
25mm dia bamboos of good quality fixed half cut vertically
to horizontal wooden batten of size 25mm to 40mm of
ordinary wood with nails including two coats of painting
with primer including all lead lift loading unloading all
taxes all L&M, T&P as a complete job
242210 Providing & fixing full bamboo jafri without gap of 20 to 1 Sqm 641.38
25mm dia bamboos of good quality fixed vertically to
horizontal wooden batten of size 25mm to 40mm of
ordinary wood with nails including two coats of painting
with primer including all lead lift loading unloading all
taxes all L&M, T&P as a complete job
243010 1
243020 1
243030 1
243040 1
243050 1
243060 1
243070 1
243080 1
243090 1
243100 1
CHAPTER - 25 : SUPPLY OF
MATERIALS
Roof and Ceilings 1
251010 Supply of Asbestos fibre cement corrugated sheet 6mm 1 Sqm 161.00
thick
251020 Supply of Asbestos fibre cement close fitting adjustable 1 Pair 235.46
ridge 1.10 m long
251040 Supply of Asbestos Cement one piece plain angular ridge 1 Each 162.44
1.22 m long
251060 Supply of Asbestos fibre cement north light ventilator 1 Each 275.71
curves
251070 Supply of Asbestos Cement north light adjustable ridge 1 Pair 207.29
1.22 m long
251080 Supply of Asbestos fibre cement curved barge boards 6 1 Each 161.00
mm thick
251100 Supply of Asbestos Cement roof light 1.82 m long 1 Each 1207.50
251110 Supply of Asbestos Cement expansion joint for north light 1 Each 156.98
curves
251180 Supply of Standard quality hard board sheet 4.5 mm thick 1 Sqm 237.02
252130 Supply of Fine sand (Zone IV) (Ordinary Sand) 1 cum 575.00
252140 Supply of Local sand / pit sand/yamuna sand for filing 1 cum 402.50
purposes
252200 Supply of F.P.S. bricks class designation 7.5 1000 Nos. 2990.00
252210 Supply of F.P.S. bricks class designation 5.0 1000 Nos. 1955.00
252220 Supply of F.P.S. bricks tile class designation 10.0 1000 Nos. 2415.00
252230 Supply of Machine moulded FPS tile bricks of class 1000 Nos. 3405.15
designation 12.5
252240 Supply of Mild steel round bar 12 mm dia and below 1 quintal 3795.00
252250 Supply of Mild steel round bar above 12 mm dia 1 quintal 3737.50
252260 Supply of Twisted steel / deformed bars Gr. Fe 415 (TMT 1 quintal 4025.00
Bars or
HYSD Bars.)upto 12mm dia
252270 Supply of Twisted steel / deformed bars Gr. Fe 415 (TMT 1 quintal 4255.00
Bars or
HYSD Bars.) over 12mm dia
252280 Supply of Twisted steel / deformed bars Gr. Fe 500 (TMT 1 quintal 4370.00
Bars or
HYSD Bars.)upto 12mm dia
252290 Supply of Twisted steel / deformed bars Gr. Fe 500 (TMT 1 quintal 4255.00
Bars or
HYSD Bars.) over 12mm dia
252330 Supply of Extruded burnt flyash clay sewer bricks 1000 Nos. 4082.50
conforming to IS
4885-1988
252350 Supply of Boundary stone (Sand stone variety.) top chisel 1 Each 103.50
dressed
15x15x90 cm
252410 Supply of Stone setts of size 25X12.5X10 cms 100 Nos. 345.00
253080 Supply of Brass tower bolt (barrel type) 250x10 mm 1 Each 241.50
253090 Supply of Brass tower bolt (barrel type) 200x10 mm 1 Each 138.00
253100 Supply of Brass handles 100 mm with plate 150x32 mm 1 Each 80.50
253120 Supply of Brass hard drawn hooks and eyes 250 mm 10 Nos. 584.20
253130 Supply of Brass casement stays (straight peg type) 250 1 Each 63.25
mm weighing not less than 0.28 kg
253150 Supply of Chromium plated Brass curtain rod 20 mm dia 1 metre 167.90
1.25mm thick
253160 Supply of Chromium plated Brass curtain rod 25 mm dia 1 metre 274.85
1.25mm thick
253170 Supply of Bright finished or black enameled mild steel butt 10 Nos. 108.10
hinges
100 x 58 x1. 90 mm
253180 Supply of Bright finished or black enameled mild steel butt 10 Nos. 92.00
hinges 75 x 47 x 1.70 mm
253190 Supply of Bright finished or black enameled mild steel butt 10 Nos. 57.50
hinges 50 x 37 x 1.50 mm
253200 Supply of Bright finished or black enameled mild steel 100 Nos. 46.00
screws 50 mm
253210 Supply of M.S. heavy weight butt hinges 100x75x3.5 mm 10 Nos. 189.75
IS: 1341 marked
253220 Supply of M.S. heavy weight butt hinges 75x60x3.1 mm 10 Nos. 82.80
IS: 1341 marked
253230 Supply of M.S. heavy weight butt hinges 50x40x2.5 mm 10 Nos. 66.70
IS : 1341 marked
253240 Supply of Bright finished or black enameled mild steel 100 Nos. 40.25
screws 40 mm
253250 Supply of Nickel plated mild steel piano hinges 1 mm thick 1 metre 34.50
35 mm wide
253260 Supply of Oxidised mild steel sliding door bolt 300x16 mm 1 Each 109.25
253270 Supply of Oxidised mild steel sliding door bolt 250x16 mm 1 Each 74.75
253280 Supply of Oxidised mild steel tower bolt (barrel type) 1 Each 34.50
250x10 mm
253290 Supply of Oxidised mild steel tower bolt (barrel type) 1 Each 28.75
200x10 mm
253300 Supply of Oxidised mild steel tower bolt (barrel type) 1 Each 23.00
150x10 mm
253360 Supply of Anodised Aluminium sliding door bolt 300x16 1 Each 74.75
mm
253370 Supply of Anodised Aluminium sliding door bolt 250x16 1 Each 63.25
mm
253380 Supply of Anodised Aluminium tower bolt (barrel type) 10 Nos. 552.00
300x10 mm
253390 Supply of Anodised Aluminium tower bolt (barrel type) 10 Nos. 230.00
250x10 mm
253400 Supply of Anodised Aluminium tower bolt (barrel type) 10 Nos. 209.88
200x10 mm
253410 Supply of Anodised Aluminium tower bolt (barrel type) 10 Nos. 184.00
150x10 mm.
253420 Supply of Anodised Aluminium tower bolt (barrel type) 10 Nos. 138.00
100x10 mm
253430 Supply of Anodised Aluminium handles 125 mm with plate 10 Nos. 103.50
175 x 32 mm
253440 Supply of Anodised Aluminium handles 100 mm with plate 10 Nos. 80.50
150 x 32 mm
253450 Supply of Anodised Aluminium handles 75mm with plate 10 Nos. 51.75
125 x 32 mm
253500 Supply of 1 mm thick 35mm wide bright finished stainless 1 metre 46.00
steel piano hinges
253510 Supply of Block board construction flush door with 1 Sqm 782.00
commercial ply on both faces 35 mm thick
253520 Supply of Block board construction flush door with 1 Sqm 747.50
commercial ply on both faces 30 mm thick
253530 Supply of Block board construction flush door with 1 Sqm 724.50
commercial ply on both faces 25 mm thick
253610 Supply of 1.0mm thick decorative laminated sheet (Mat 1 Sqm 447.70
finish)
253620 Supply of 1.0mm thick decorative laminated sheet (Glossy 1 Sqm 447.70
finish)
253630 Supply of Oxidised M.S. safety chain with hook etc 1 Each 57.50
complete. (weighing not less 450 gms) for door
253670 Supply of Float glass sheet of nominal thickness 5.5 mm. 1 Sqm 434.53
(weight not less than 13.50 kg/sqm)
253710 Supply of Ply wood 5 ply with commercial ply on both 1 Sqm 381.80
faces 6 mm thick
253720 Supply of Hydraulic door closer bottle type M.S. body with 1 Each 655.50
necessary accessories and screws complete
253730 Supply of Anodised Aluminium hanging type door stopper 1 Each 32.20
253770 Supply of Flat pressed 3 layer and graded particle board 1 Sqm 368.00
(medium density) Grade 1 conforming to IS : 3087 - 18
mm thick
253790 Supply of Second class deodar teak wood lipping 30 mm 1 metre 52.67
width x 12 mm
253810 Supply of Structural steel such as tees, angles channels 1 quintal 4600.00
and R.S. joists and all like materials
253860 Supply of Mild steel expanded metal 20x60 mm strands 1 Sqm 316.25
253870 Supply of Nut and bolts with washers of all sizes 1 Kg 75.90
253880 Supply of 4mm thick phenol bonded Bamboo Mat board 1 Sqm 753.25
(595mm X
595mm) conforming to IS : 13958-1994
253890 Supply of 9mm thick phenol bonded Bamboo Mat Board 1 Sqm 1261.55
conforming to IS : 13958-1994
253900 Supply of 12mm thick phenol bonded Bamboo Mat Board 1 Sqm 1420.25
conforming to IS : 13958-1994
253920 Supply of 3.5 to 4mm thick Bamboo Mat corrugated sheet 1 Sqm 852.27
conforming to IS : 15476-2004
253930 Supply of 3.5 - 4mm thick bamboo mat ridge cap (BMRC) 1 metre 977.50
254090 Supply of Roofing paint for iron sheets in red colour 1 litre 172.50
255080 Supply of Circular shape 450 mm dia precast RC.C. 1 Each 714.15
manhole cover with frame - L.D. - 2.5 (As per drawing)
255100 Supply of Circular shape 500 mm dia precast RC.C. 1 Each 867.10
manhole cover with frame -M.D.-10 (As per drawing)
255110 Supply of Circular shape 560 mm dia precast RC.C. 1 Each 1262.70
manhole cover with frame - H.D. - 20 (As per drawing)
255120 Supply of Circular shape 560 mm dia precast R.C.C. 1 Each 1408.75
manhole cover with frame - E.H.D. - 35 (As per drawing)
255130 Supply of Precast RC.C. grating with frame 500x450 mm 1 Each 732.55
horizontal grating
255140 Supply of Precast RC.C. grating with frame 450x100 mm 1 Each 340.40
vertical grating
255150 Supply of Precast terrazzo tiles 22 mm thick (light shade) 1 Sqm 241.50
255170 Supply of Precast terrazzo tiles 22 mm thick (dark shade) 1 Sqm 195.50
255200 Supply of Interlocking C.C. paver block 60 mm thick, (M- 1 Sqm 425.50
30) (10 Sqm area will be laid and nos./sqm will be
assessed for accordingly). The blocks will be placed as
closely as possible without any gap for joints.
255230 Supply of 8 mm thick granite stone tiles (mirror polished of 1 Sqm 638.25
all shades)
255250 Supply of White marble slab Makrana quality plain veined 1 Sqm 1980.30
18 mm thick (slabs to be larger than 0.5 Sqm area)
255260 Supply of Udaipur green marble slab plain or alike slabs 1 Sqm 695.75
18mm thick
(slabs to be larger than 0.5 Sqm area)
255270 Supply of Black Zebra marble slab plain or alike slabs 1 Sqm 609.50
18mm thick(slabs to be larger than 0.5 Sqm area)
255310 Granite black 18 mm thick slab, above 0.2 sqm up to 0.5 1 Sqm 1650.25
sqm (area-wise)
Water Supply 1
256080 Supply of P.T.M.T. Grating square slit 150mm ( Poly Tetra 1 Each 106.95
Methylene
Terephthalate)
256090 Supply of P.T.M.T Urinal cock 15 mm dia (Poly Tetra 1 Each 138.00
Methylene
Terephthalate)
256150 Supply of 15 mm PTMT bib-cock long body with flange 1 Each 211.60
256170 Supply of 20 mm dia. PTMT stop cock ( Poly Tetra 1 Each 244.95
Methylene
Terephthalate)
256180 Supply of PTMT push cock 15 mm dia. ( Poly Tetra 1 Each 124.20
Methylene
Terephthalate)
256190 Supply of PTMT 125 mm grating with waste hole 1 Each 49.45
256260 Supply of Full way brass valve with wheel15 mm dia 1 Each 161.00
256261 Supply of Full way brass valve with wheel20 mm dia 1 Each 241.50
256262 Supply of Full way brass valve with wheel25 mm dia 1 Each 320.85
256270 Supply of 15 mm nominal dia C P brass mixer Pillar Tap of 1 Each 451.95
weight approx. 2 Kg
257020 Supply of S.C.I. soil, waste and vent single socketed 1 Each 920.00
pipe1.80 m long
: 100mm dia
257030 Supply of S.C.I soil, waste and vent single socketed 1 Each 1815.85
pipe1.80 m long
: 150mm dia
257040 Supply of S.C.I. Slotted cowl (terminal guard) 75/100 mm 1 Each 207.00
dia
257050 Supply of Polyethylene Vinyl Chloride water storage tank 1 litre 5.75
with cover and suitable locking arrangement
257060 Supply of Unplasticised P.V.C. connection pipe with brass 1 Each 34.50
union 45 cm long 15 mm bore
257070 Supply of Unplasticised P.V.C. connection pipe with brass 1 Each 48.30
union 45 cm long 20 mm bore
257080 Supply of Standard holder bat clamps for sand cast iron or 1 Each 40.25
cast iron pipes upto150 mm dia of any size as specified
257090 Supply of S&S C.I. standard specials upto 300 mm dia 1 quintal 3450.00
(heavy class)
257100 Supply of Flanged C.I. standard specials upto 300 mm dia 1 quintal 4830.00
(heavy class)
257120 Supply of Ductile iron Class K-9 pipe conforming to IS- 1 metre 1123.55
8329 100mm dia.
257130 Supply of Ductile iron Class K-9 pipe conforming to IS- 1 metre 1681.30
8329 150mm dia.
257140 Supply of Ductile iron Class K-9 pipe conforming to IS- 1 metre 2203.40
8329 200mm dia.
257150 Supply of Ductile iron Class K-9 pipe conforming to IS- 1 metre 2895.70
8329 300mm dia.
257160 Supply of S&S C.I. Pipe Specials as per IS 1538 suitable 1 quintal 4847.25
for lead jointing up to 300mm dia
257170 Supply of S&S C.I. Pipe specials suitable for mechanical 1 quintal 5750.00
joint as per
I.S. 13382 up to 300mm dia
257230 Supply of RC.C. pipes NP2 class 150 mm dia with collars 1 metre 201.25
257240 Supply of RC.C. pipes NP2 class 250 mm dia with collars. 1 metre 305.90
257250 Supply of Stoneware pipes grade A (60 cm long) 150 mm 1 Each 69.00
dia
257260 Supply of Stoneware pipes grade A (60 cm long) 200 mm 1 Each 119.60
dia
257270 Supply of Stoneware pipes grade A (60 cm long) over 200 1 Each 265.65
mm dia including 300 mm dia
257280 Supply of Stone ware spouts 100 mm dia 60 cm long 1 Each 43.70
257310 Supply of UPVC coupler for UPVC drainage pipes 75 mm 1 Each 44.85
257320 Supply of UPVC coupler for UPVC drainage pipes 110 1 Each 59.80
mm
257380 Supply of White plastic W C seat (solid) with lid C.P. brass 1 Each 373.75
hinges and rubber buffers
257390 Supply of Black plastic seat (solid) with lid C.P. brass 1 Each 377.20
hinges and rubber buffers
257400 Supply of Shower rose C.P. brass for 15 to 20 mm inlet 1 Each 46.00
100 mm dia
257410 Supply of Shower rose C.P. brass for 15 to 20 mm inlet 1 Each 59.80
150 mm dia
257430 Supply of C.P. brass toilet paper holder of standard size 1 Each 104.65
257440 Supply of HP. or L.P. ball valve with polythene floats: 15 1 Each 266.80
mm dia
257450 Supply of H.P. or L.P. ball valve with polythene floats: 20 1 Each 387.55
mm dia
257460 Supply of H.P. or L.P. ball valve with polythene floats: 25 1 Each 480.70
mm dia
257470 Supply of Vitreous china flat back wash basin 630x450 1 Each 882.05
mm (White)
257480 Supply of Vitreous china angle back wash basin 600x480 1 Each 879.75
mm (White)
257490 Supply of Vitreous china angle back wash basin 400x400 1 Each 516.35
mm (White)
257500 Supply of Vitreous china Indian type w.c. pan size 580 1 Each 465.75
mm (White)
257510 Supply of Vitreous china orrisa type w.c. pan size 580 mm 1 Each 961.40
(White)
257520 Supply of Vitreous china pedestal type water closet 1 Each 753.25
(White)
257540 Supply of 32 mm nominal dia. flush pipes with clamps for 1 Each 135.70
high level flushing cisterns with unplasticised PVC tube
257550 Supply of C.I. bracket for wash basin and sinks 1 pair 92.00
257650 Supply of Vitreous china pedestal for wash basin (White 1 Each 862.50
colour)
257670 Supply of Vitreous china toilet paper holder of standard 1 Each 133.40
size
257680 Supply of Vitreous china 10 litres, low level cistern without 1 Each 1120.10
fittings
(White)
257690 Supply of Vitreous china 10 litres low level cistern with 1 Each 2094.15
fittings
(White)
257700 Supply of Coloured Orissa pattern W.C. pan 580x440 mm 1 Each 1417.95
257710 Supply of Coloured Pedestal type W.C. pan 580x440 mm 1 Each 1176.45
(European type)
257720 Supply of Coloured Vitreous china 10 lit. low level cistern 1 Each 1723.85
257730 Supply of Coloured (other than black)solid P.V.C. seat in 1 Each 517.50
European
W.C. pan
257740 Supply of Circular shape 450 mm dia Mirror with Plastic 1 Each 503.70
moulded frame
257760 Supply of Mirror of superior make glass 60x45 cm (With 5- 1 Each 369.15
6mm thick base complete)
257770 Supply of Semi Rigid PVC waste pipe for sink and wash 1 Each 21.85
basin 32 mm dia with length not less than 700 mm i/c
PVC waste fittings
257780 Supply of Semi Rigid PVC waste pipe for sink and wash 1 Each 28.75
basin 40 mm dia with length not less than 700 mm i/c
PVC waste fittings
257810 Supply of Flushing Cistern P.V.C. 10 litres capacity (low 1 Each 775.10
level) (White) (with fittings, accessories and flush pipe)
257830 Supply of White glazed fire clay draining board 1 Each 587.65
600x450x25 mm
257840 Supply of White vitreous china clay half stall urinal flat 1 Each 1495.00
back
580x380x350 mm or angle back 450x375x350 mm with
waste fittings as per IS : 2556
257870 Supply of C P brass Towel Ring 215x200x (37 mm from 1 Each 83.95
wall)
complete with fixing arrangements
257880 Supply of CP brass Towel Rail (750mm) (With brackets 1 Each 152.95
and fixing arrangements)
257890 Supply of CP brass Towel Rail (600mm) (With brackets 1 Each 150.65
and fixing arrangements)
258010 Supply of Bucket leather best quality for hand pumps. 1 Each 23.00
65mm dia.
258020 Supply of Bucket leather best quality for hand pumps 1 Each 31.05
89mm dia.
258030 Supply of Handle C.I. of standard shape and size for hand 1 Each 301.30
pump No.6 of approved make with bolts and nuts 10mm x
65mm one number in Each
258040 Supply of Plunger C.I. 89mm with M.S rod 12mm dia x 1 Each 451.95
450mm long complete with leather bucket 89mm dia for
pump No.6
258050 Supply of Strainer brass 40 mm dia 1.5 M long for hand 1 Each 650.90
pumps
258060 Supply of All brass cylinder 65mm outer dia. 450 long 1 Each 644.00
complete with all brass plunger, plungers rod socket, all
brass poppet/lower valve and bucket leather for deep tube
well pump
258070 Supply of 12mm round M.S. galvanised connecting rod 1 Each 258.75
both ends threaded 3.05 Ms long complete with one G.I.
coupling
50mm long fitted one in Each length
258080 Supply of Coupling C.I. 50mm long for 12mm dia 1 Each 150.65
connecting rod
258090 Supply of Leather seat valve 100mm dia best quality 1 Each 120.75
complete with C.I. weight and G.I. bolts 6mm x 20mm one
number in Each
258100 Supply of India Mark-II pump as per IS – 9301 complete in 1 Each 10350.00
all respect including hand pump, cylinder, 6 no.
connecting rods of approved quality
258110 Supply of Inspection cover for India Mark-II deep well 1 Each 150.65
pump
258120 Supply of Chain with coupling for India Mark-II deep well 1 Each 301.30
pump
258130 Supply of M.S. galvanised handle for India Mark-II deep 1 Each 226.55
well pump
(without bearing and chain)
258140 Supply of C.I. cylinder with brass liner complete with gun 1 Each 690.00
metal plunger with leather/mitryl rubber lower valve and
plunger rod complete as per ISS-9301-90.( 20-50mts
depth)
258150 Supply of Hand pump No.6 complete with C.I. head and 1 Each 2645.00
handle and C.I. plunger and C.I plunger rod with C.I.
plunger 89 mm including one leather bucket 89 mm
complete best quality
258160 Supply of Base C.I. heavy 40mm bore for hand pump 1 Each 301.30
No.6
Miscellaneous 1
259010 Supply of Special Chicks bamboo, lined with blue cloth 1 Sqm 287.50
with tapes, fixed in place with pulleys and ropes complete
259020 Supply of Chicks bamboo, without lining cloth but bound 1 Sqm 198.05
with broad tape 5cm fixed in place with pulleys and ropes
complete
259030 Supply of Bamboo ladders with side poles, not less than 1 Each 207.00
50 mm dia and rungs, not less than 40 mm dia and 30 cm
apart of lengths. 4 m Long
259040 Supply of Chain link fabric fencing mesh of size 50x50mm 1 Sqm 327.75
made of
G.I. wire of dia. 4mm
259050 Supply of Chain link fabric fencing mesh of size 25x25mm 1 Sqm 299.00
made of
G.I. wire of dia. 3mm
259090 Supply of Polyvinyl chloride sheet 400 micron thick 1 Sqm 40.25
259100 Supply of Circular C.I. Box for ceiling fan and concealed 1 Each 34.50
wiring etc.
259110 Supply of Chlorpyriphos 20% E.C. I Lindane 20% E.C. For 1 litre 322.00
termite treatment
259130 Supply of Eucalyptus / Safeda ballies 125 mm dia mini 1 metre 28.75
4mt. Long
259140 Supply of Casurina ballies/ posts 100 mm average dia 1 metre 115.00
259150 Supply of Sal wood ballies average 100 mm dia 1 metre 103.50
259220 Supply of Galvanised Steel wire ropenet, made of 9mm 1 Sqm 138.00
dia steel wire rope having aperture size of 45cm x 60cm
with
6m length hangs
259230 Supply of Erosion Control Geomat (for surfacial erosion 1 Sqm 86.25
control) consisting of 2 layers of polymeric netting, having
aperture size of 20mm x 20mm and a middle layer of coir
as per Specifications. Max. width of rolls/each composite
mat shall be 5m
259240 Supply of Mechanically Woven Double Twisted Hexagonal 1 Cum 1552.50
Shaped Wire Mesh Gabion Boxes of required sizes, Mesh
Type 10mm x 12mm, Zn and PVC coated Mesh Wire
dia.2.7/3.7mm (ID/OD), edges of meshes mechanically
edged / selvedged with heavy coating of galvanization as
per EN 10223-3/ASTM A 975 with partitions at every 1m
interval
259260 Supply of Biaxial Geo-grid, made from virgin high density 1 Sqm 241.50
polypropylene, having aperture size of 65mmx 65mm and
ultimate tensile strength of 30 kN/m with minimum junction
efficiency of 95% & minimum radial stiffness of
350 kN/m (@0.5% strain)
259290 Supply of Non - Asbestos fibre cement corrugated apron 1 metre 188.37
piece
259300 Supply of Non - Asbestos fibre cement eaves filler piece 1 Each 139.04
259310 Supply of Non - Asbestos fibre cement special north light 1 Each 411.13
curves
259320 Supply of Non - Asbestos multi purpose fibre cement 1 Sqm 340.40
board 8mm thick
259440 Supply of Non - Asbestos fibre cement corrugated sheet 1 Sqm 306.48
6mm thick
259450 Supply of Non - Asbestos fibre cement close fitting 1 metre 303.49
adjustable ridge
259460 Supply of Non - Asbestos fibre cement corrugate serrated 1 metre 260.13
adjustable ridge
259470 Supply of Non - Asbestos fibre cement plain wing 1 metre 281.06
adjustable ridge
259490 Supply of Non - Asbestos fibre cement north light curves 1 metre 294.52
259500 Supply of Non - Asbestos fibre cement ventilator curves 1 Each 399.17
259510 Supply of Non - Asbestos fibre cement barge boards 6 1 metre 346.84
mm thick
259520 Supply of Non - Asbestos fibre cement ridge finial 1 pair 125.58
259530 Supply of Non - Asbestos fibre cement S type louvers 1 Each 240.70
259540 Supply of Non - Asbestos multi purpose fibre cement 1 Sqm 266.80
board 6mm thick
259610 1
259620 1
259630 1
259640 1
259650 1
259660 1
1 0 0.00
1 0 0.00
Cement
Qty.(qtl.)
2.200
2.200
1.700
1.300
1.700
1.300
2.200
2.200
3.200
4.000
2.200
As appd in
Design Mix
As appd in
Design Mix
2.800
3.800 or as appd
in design
mix
4.040 or as appd
in design
mix
4.040 or as appd
in design
mix
0.080
0.130
0.160
0.002
0.003
0.28
3.440 or as appd.
in design
mix
3.440 or as appd.
in design
mix
3.440 or as appd.
in design
mix
3.440 or as appd.
in design
mix
3.440 or as appd.
in design
mix
3.440 or as appd.
in design
mix
4.040 or as appd
in design
mix
4.040 or as appd
in design
mix
4.040 or as appd
in design
mix
4.040 or as appd
in design
mix
4.040 or as appd
in design
mix
4.040 or as appd
in design
mix
4.040 or as appd
in design
mix
4.040 or as appd
in design
mix
4.040 or as appd
in design
mix
4.340 or as appd
in design
mix
3.200 or as appd
in design
mix
0.073
As per site
conditions
0.002
0.625
0.425
1.270
0.950 2311.21
0.625
1.270
0.950
0.625
1.120
0.840
0.550
1.120
0.840
0.550
0.625
0.550
0.313
1.430
0.092
1.280
1.280
0.143
0.106 272.84
46.13
Extra
0.004
1.000
1.000
2.040
1.520
1.000
2.040
1.520
1.000
1.000
1.520
1.520
1.330
0.077
0.066
0.132
0.004 Extra
0.625
0.625
0.550
0.550
0.550
0.550
0.550
0.550
0.625
0.625
0.425
0.625
0.950
0.625
0.950
0.625
0.836
0.836
0.550
0.550
0.836
0.836
0.550
0.550
0.836
0.682
1.120
0.020
As Per Site
Decision
As Per Site
Decision
As Per Site
Decision
As Per Site
Decision
As Per Site
Decision
As Per Site
Decision
As Per Site
Decision
As Per Site
Decision
1.610
0.020
0.010
0.010
0.020
0.030
0.153
0.114
0.002
0.105
0.097
0.014
1.680
1.250
0.830
0.830
0.775
1.530
1.130
0.750
0.750
0.705
1.530
1.130
0.750
0.750
0.705
1.530
1.130
0.750
0.750
0.705
0.490
0.490
0.690
0.690
1.070
1.070
1.070
1.070
0.540
0.540
0.045
0.045
0.045
0.045
0.045
0.045
0.045
0.045
0.045
0.045
0.030
0.020
0.007
0.007
0.056
0.056
0.049
0.049
0.022
0.030
0.540
0.540
0.050
0.050
0.050
0.080
0.080
0.030
0.030
0.030
0.030
0.030
0.010
0.020
0.020
0.020
0.155
0.137
0.077
0.077
0.077
231.69539
0.001
0.001
0.001
0.001
0.011
0.020
0.004
0.004
0.004
0.004
0.004
0.004
0.004
0.010
0.010
0.010
0.010
0.010
0.001
0.001
0.020
0.185
0.129
0.105
0.075
3.200
3.200
0.123
0.170
0.202
0.281
0.110
0.140
3.200
3.440
3.990
4.070
0.041
0.041
0.058
0.058
0.129
0.129
0.089
0.147
0.147
0.089
0.094
0.094
0.139
0.139
0.094
0.094
0.094
0.094
0.094 625.051543 625.051543
0.094 750.106225
0.094 875.173958
0.047
0.050
0.104
0.124
0.124
0.124
0.124
0.124
0.124
0.124
0.124
0.124
0.124
0.087
0.087
0.087
0.149
0.149
0.150
0.150
0.149
0.149
0.150
0.150
0.137
0.149
0.152
0.095
0.095
0.100
0.100
0.100
0.100
0.094
0.094
0.094
0.067
0.067
0.067
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.057
0.057
0.057
0.057
0.057
0.087
0.087
0.087
0.067
0.067
0.067
0.067
0.007
0.007
0.007
0.007
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.087
0.031
0.031
0.091
0.198
0.031
0.031
0.060
0.007
0.007
0.020
0.015
3.200
5.100 157.131
0.002
0.002
0.002
0.002
0.002
0.003
0.003
0.005
0.003
0.003
0.005
0.066
0.088
0.132
0.003
0.003
0.005
0.002
0.002
0.003
0.002
0.002
0.003
0.003
0.005
0.005
0.006
0.008
0.009
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.005
0.003
0.003
0.005
0.003
0.003
0.003
0.004
0.004
0.005
0.003
0.003
0.005
0.003
0.003
0.005
0.007
0.001
0.001
0.001 157.31
as at site
as at site
as at site
as at site
as at site
as at site
as at site
0.020
0.055
0.036
0.065
0.043
0.085
0.056
0.055
0.036
0.065
0.043
0.085
0.056
0.095
0.077
0.110
0.087
0.095
0.110
0.063
0.081
0.098
0.117
0.037
0.073
0.037
0.059
0.022
0.036
0.024
0.042
0.116
0.116
0.164
0.129
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.015
0.020
0.015
0.015
0.015
0.024
0.024
0.024
0.024
0.007
0.012
0.015
0.007
0.007
0.002
0.004
0.077
0.033
0.099
0.106
0.106
141
139.8041
7.4349442379 1205
162.0725 8.103625
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.010
0.010
0.010
0.010
0.010
0.010
0.010
0.010
174.22
0.010
0.010
0.010
0.010
207.78
0.010
0.010
0.010
0.010
196.18
Type -V @
BZA
0.260
1.440
2.480
3.500
1.300
1.340
0.030
0.010
0.010
0.020
0.010
0.010
0.010
0.010
0.020
0.020
0.030
0.022
0.032
0.043
0.049
0.054
0.065
0.085
0.011
0.017
0.022
0.027
0.032
0.250
0.306
0.356
0.390
0.412
0.091
0.148
0.174
0.191
0.203
0.234
0.303
0.270
0.270
0.260
0.260
0.250
0.250
0.005
0.006
0.009
0.011
0.024
0.026
0.032
0.037
0.042
0.049
0.055
0.061
0.068
0.011
0.017
0.024
0.026
0.032
0.037
0.042
0.049
0.055
0.061
0.068
2.920
2.920
4.730
2.750
2.750
3.610
3.610
5.390
5.390
6.270
6.270
10.860
10.860
16.710
16.710
0.009
0.009
0.009
0.009
0.056
0.095
0.153
0.340
0.460
0.210
0.260
0.200
0.320
0.280
0.280
0.930
0.820
1.660
0.900
1.020
1.270
0.870
0.950
1.120
1.020
0.200
0.300
0.020
0.010
0.050
0.080
0.001
0.001
0.001
0.050
0.050
0.002
0.002
0.002
0.002
0.025
0.040
0.067
0.095
0.051
0.102
0.153
0.203
0.051
0.102
0.153
0.203
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.010
0.051
0.051
0.025
0.025
0.025
0.025
0.010
0.010
0.020
0.020
0.015
0.015
0.001
0.020
0.020
0.015
0.015
0.015
0.015
0.015
0.015
0.050
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.030
0.030
0.030
0.030
0.005
0.005
0.004
0.004
0.001
0.001
0.005
0.005
0.025
0.025
0.025
0.025
0.003
0.002
0.050
0.020
0.030
0.005
0.004
0.002
0.070
0.070
0.120
0.060
0.030
0.016
0.031
0.342
0.342
0.443
0.443
0.158
0.012
0.020
0.387
As per site
requirem
ent
3.200
5.100
3.800
0.009
0.012
0.537 or as per
desgin mix
0.681 or as per
desgin mix
0.840 or as per
desgin mix
1.017 or as per
desgin mix
0.302 or as per
desgin mix
0.530 or as per
desgin mix
0.681 or as per
desgin mix
0.840 or as per
desgin mix
1.209 or as per
desgin mix
0.333 or as per
desgin mix
0.633 or as per
desgin mix
0.816 or as per
desgin mix
1.207 or as per
desgin mix
0.141
0.270
0.347
0.437
0.621
0.784
0.959
1.168
0.087
0.000
2.200
4.220 Or as per
appd
design mix.
3.440 Or as per
appd
design mix.
4.220 Or as per
appd
design mix.
4.220 Or as per
appd
design mix.
4.220 Or as per
appd
design mix.
4.220 Or as per
appd
design mix.
4.220 Or as per
appd
design mix.
7.561 Or as per
appd
design mix.
4.836 Or as per
appd
design mix.
3.360 Or as per
appd
design mix.
2.180 Or as per
appd
design mix.
1.209 Or as per
appd
design mix.
4.220 Or as per
appd
design mix.
4.220 Or as per
appd
design mix.
4.220 Or as per
appd
design mix.
4.220 Or as per
appd
design mix.
4.220 Or as per
appd
design mix.
4.220 Or as per
appd
design mix.
4.220 Or as per
appd
design mix.
3.440 Or as per
appd
design mix.
4.030 or as per
appd
design
Mix.
4.300 or as per
design mix
4.300 or as per
design mix
4.300 or as per
design mix
4.300 or as per
design mix
4.300 or as per
design mix
4.300 or as per
design mix
as per
actual site
consumptio
n
3.200
1.250
1.12 for
rubble
stone only
0.160
as per
actual site
consumptio
n
as per
actual site
consumptio
n
0.160
0.010
0.020
0.010
0.122
0.100
0.100
0.000
3.200
3.400 or as per
design mix
0.070
0.020
0.020
0.020
0.020
As per site
condition
As per site
condition
As per site
condition
As per site
condition
As per site
condition
As per site
condition
As per site
condition
As per site
condition
As per site
condition
As per site
condition
As per site
condition
0.000
0.000
131090 Providing and fixing Chlorinated Polyvinyl 1 131140
Chloride (CPVC) pipes, having thermal
stability for hot & cold water supply including
all CPVC plain & brass threaded fittings
including fixing the pipe with clamps at
1.00m spacing in This includes jointing of
pipes & fittings with one step CPVC solvent
cement and the cost of cutting chases and
making good the same including testing of
joints complete as per direction of Engineer-
in-Charge. Concealed work including cutting
chases and making good the walls etc.
Providing and fixing medium grade G.I. Concealed pipe etc., 1 metre 196.68 0.010
- 20 mm dia. nominal bore
Providing and fixing medium grade G.I. including trenching 1 metre 196.18
and refilling etc., - 25 mm dia. nominal bore
Providing and fixing medium grade G.I. including trenching 1 metre 268.86 Type -V @
and refilling etc., - 40 mm dia. nominal bore BZA
-19.32
-33.07
29.27
SOUTH CENTRAL RAILWAY
Name of work: SW-1 Sanchalan Bhavan : proposed Repair to Test room at Ground Floor ,Staff area of Sr.DME office ,Sr DFM office and Tollet blocks of Cel
Accp. Lr.no : CW/WV/WV/25/Co/SC/15/OT date ; 25.06.2015 Agency : N. Bhasker Rao h-no 5-4-7/2 Ramaiahnagar Kukatp
1 011011 Earth work in excavation as 100.28 1 cum 204.00 20457.12 101.00 250.00 351.00
per approved drawings and
2 021070 dumping at embankment
Loading/Unloading ballast, 46.62 1 Cum 806.80 37613.02 675.00 425.00 1100.00
site
kankar, or spoil brickbats, heap, stone- within
railway
chips, land,
shingle, including stone 50m
3 021090 Leading ballast, kankar, 59.54 1 Cum 405.90 24167.29 338.00 212.00 550.00
lead and 1.5m
boulders, block lift, etc.,
kankar, - All
brickbats, stone-chips,
kinds of soils
pitching stones boulders, , rubble
4 031023 shingle,
Providing stone
and laying 2309.45 1 cum 99.00 228635.55 124.00 30.00 154.00
stones, laterite,
block kankar, coal, cementsurkhi,
concrete, up to , pitching
plinth in
dry mortar,
stones, walls, sand
rubble moorum,
stones,
5 033010 retaining
Extra for every etc., - 1:2:4
subsequent (1 163.95 1 cum 48.00 7869.60 48.00 0.00 48.00
earth,
laterite, manurecoal, or sludge,
surkhi, : dry
3mcement
height (: or2etc., partsand there of4 )
ashes,
mortar, lime
sand, moorum, including
earth,
graded
above floor stone
two aggregate
level from
6 041011 lead up toor 50m
Providing
manure and
sludge, and
laying stacking
ashes, in 2326.70 1 cum 29.70 69102.99 29.70 29.70
20mm
plinth nominal size)
lime, level Mfor concrete
into/from
position trucks, 20 trailors work
Grade or
debris, muck, malba,
in superstructure
wagons
concrete
7 041012 etc. for leadfor
Providing upto reinforced
and 25 km. Note
laying in 2530.27 1 cum 13.90 35170.75 17.00 17.00
concrete
: Lead under
position etc.,
M - 20 All
thiswork item upto
Grade is
plinth
payable level, including raft
8 042012 Centering when
concrete for the
and reinforced same
shuttering 227.70 1 Sqm 197.20 44902.44 100.00 100.00
foundation
exceeds of -Allwashable
concrete
etc., for500m. etc.,
-tank, Walls work (anyin
aprons,
buildings HS above pile level
plinth cap,
9 042013 thickness)
Centering including
and attached
shuttering 230.70 1 Sqm 91.30 21062.91 30.00 30.00
footings
upto floor of twoFOB, level.and Platform
plasters,
etc., foretc.- buttresses,
Suspended floors, plinth
shelter
and string
roofs, landings, courses etc.
10 043012 Providing, hoistingbalconies, and fixing 3788.40 1 cum 0.25 947.10 0.25 0.25
FOB
in position upto floor two level
slabs,
M20 Grade walkway precastslabs RCC and
11 043014 Providing, hoisting and fixing 3770.47 1 cum 6.00 22622.82 6.00 6.00
access
work platform
etc., - In small lintels
in position upto floor two level
upto
M20 1.50m Gradeclear span RCC
12 051018 Brick work withprecast non-modular 2277.09 1 cum 3.50 7969.82 7.00 16.00 23.00
work etc.,
(FPS) bricks of class - In Shelves,
etc., -
cantilevers,
Cement mortar chajjas,
1:6 (1
13 051040 Extra over item 051010 & 166.76 1 cum 3.00 500.28 7.00 16.00 23.00
sunshades
cement etc.
051020 : 6for coarse bricksand) work in
14 051050 superstructure
Extra for brick beyond workplinth in 327.89 1 cum 6.00 1967.34 21.00 16.00 37.00
level upto floor two level
superstructure :
beyond
15 051181 second
Half brickfloor masonry level with for bricks
every 272.84 1 Sqm 170.00 46382.80 170.00 170.00
3m
of or part designatio
class thereof : etc., -
16 057103 Cement
Add or deduct mortar from 1:3 rates (1 of -538.85 1 cum 20.00 -10777.00 20.00 20.00
cement
brickwork : 3 when
coarse the sand) b etc., -
17 057104 Deduct
Add or for deduct Class from designation
rates of -655.33 1 cum 10.50 -6880.97 20.00 16.00 36.00
5
brickwork when the b etc., -
18 071011 Deduct
Providing for Classwood designation work in 69.49 1 cudm 1100.00 76439.00 1100.00 1100.00
3.5
frames of doors, windows, c
19 072152 etc., - Second
Providing and fixing class flush teak 1038.69 1 Sqm 20.00 20773.80 20.00 20.00
woodshutters to IS:
door
20 072160 22 etc.,
Extra for providing- 30mm and fixingthick 351.93 1 Sqm 12.00 4223.16 12.00 12.00
includingdoors
flush ISI marked withstainless teak
steel
veneering butt on one hinges
side in with
item
21 073030 Providing and fixing 25mm 2576.73 1 Sqm 74.00 190678.02 74.00 74.00
necessary
No.072150 screws
thick cup board shutters , with
22 074351 prelaminated flat
Providing and pressed fixing 3 226.49 1 Sqm 40.00 9059.60 40.00 40.00
layer
decorative particle laminated plastic board
conforming
etc., - 1 mm thick to IS 12823
23 077072 Providing 88.23 1 Each 30.00 2646.90 30.00 30.00
-Grade I, and fixing
having one bright side
finished brasslamination
handles etc.,of-
decorative
24 077121 100mm
Providing and fixing
approved shade andspecial other 98.01 1 Each 30.00 2940.30 30.00 30.00
quality bright finish lamination
side balancing cupboard
25 077191 or ward robe
including
Providing and second locksIS:
fixing etc.,
3564-
class 1116.39 1 Each 14.00 15629.46 14.00 14.00
40mm
teak woodaluminium
marked lipping Door
26 077600 25x12mm
closureext
Providing and etc., thick
fixing - magnetic
Hardwyn with 27.08 1 Each 14.00 379.12 14.00 14.00
necessary
make
catcher (Eddy) ISIscrews
or marked and nickel
equivalent with
plated
necessary bright screws finished etc. MS
27 078012 Providing
piano hinges and
complete fixing ISI 84.25 1 Each 150.00 12637.50 150.00 150.00
complete aluminium butt hin
marked
28 078021 etc., - 125x63x4mm
Providing and fixing 95.91 1 Each 43.00 4124.13 50.00 50.00
aluminium sliding door bolts
29 078033 etc., - 300x16mm
Providing and fixing 39.26 1 Each 43.00 1688.18 50.00 50.00
aluminium tower bolts ISI mar
30 078061 etc., - 200x10mm
Providing and fixing 17.85 1 Each 104.00 1856.40 104.00 104.00
aluminium handles I etc., -
31 078072 125mm
Providing and fixing 59.61 1 Each 25.00 1490.25 25.00 25.00
aluminium hanging floor door
32 078310 etc., - Twinand
Providing rubber fixingstopperof fibre 510.24 1 RM 230.00 117355.20 230.00 230.00
glass reinforced plastic (FRP)
33 078320 door frames
Providing andof fixing three 30 leggedmm 2258.43 1 Sqm 85.00 191966.55 85.00 85.00
of cross-
thick glass section fibre90reinforcedmm x 45
mm
(FRP) having
panelled singledoor rebate of
shutter
34 082011 Providing 345.16 1 Kg 871.00 300634.36 1375.00 1375.00
x and fixingtoanodised
32 mm
of required 15 mm colour receive
aluminium etc., - and
shutter of 30work For
approved mm brand and
fixed portion
thickness. The
manufacture, made with fire laminate door
frame
retardantmoulded grade unsaturated with fire
As per Agreement PROP REQ QTYS As per requi
SSR/NS
SI. No Description of work Rate Unit
Item.No
Qty Amt Qty
35 082012 Providing and fixing anodised 353.19 1 Kg 215.00 75935.85 600.00 600.00
aluminium work etc., - For
36 082022 openable/sliding
Providing and fixing portions 12mm and 1017.77 1 Sqm 47.00 47835.19 47.00 47.00
fixing hinges / pivots,
thick prelaminated thre etc.,PVC/-
neoprene
Prelaminated gasket
particle required
board
37 082032 Providing and fixing glazing in 768.14 1 Sqm 117.00 89872.38 240.00 240.00
and
with making
decorative provision
lamination for
on
aluminium d etc., - With
fixingsides
both of fittings. (Fittings shall
38 082041 float/frosted
Providing glass panes of 1837.16 1 Each 4.00 7348.64 4.00 4.00
be paid for and separately)fixing double
5.5mm thickness etc., - With
action hydraulic
(weight
Stainless notSteel less cover than plate 13.75
39 082080 Aluminium Composite 1728.47 1 Sqm 48.00 82966.56 48.00 48.00
kg/sqm)
Cladding - Providing and
40 095013 fixing
Providing and fixing Ist quality 671.29 1 Sqm 700.00 469903.00 700.00 700.00
Aluminium
ceramic etc., Composite
- 300x450 Panelsmm
having
and abovetotal thickness of
41 095023 Providing and
4mm (with 0.5mm thick fixing ceramic 656.15 1 Sqm 275.00 180441.25 300.00 300.00
tiles
aluminiumconforming foil skin etc.,on -both Of
42 095026 Group
Providing B-I-b
sides) alongwith andoffixing IS :ceramic
minimum 15622 25 775.21 1 Sqm 792.00 613966.32 1050.00 1050.00
(Ceramic
micron PVdF
tiles conforming Tiles)Coating
of size etc., on- top Of
200x200mm
coil
Group and
B-I-a toofPolymer/epoxy
400x400mm
IS : 15622
43 095030 Extra over items 095025 and 40.15 1 Sqm 100.00 4015.00 800.00 800.00
coating
095026, on
(Vitrified tiles)Backif of size coil (4-7
above
adhesive
microns)
400x400mm
(recommended fixedupto on aluminium600x600 by
44 099034 Providing
substructure and of 50mm fixing x 18mm 2499.87 1 Sqm 15.00 37498.05 15.00 15.00
mm
manufacturer of tiles) of-
thick
25mm mirror polis etc.,
specifiedxBlack.
Granite
3mm or 38mm
thickness Area isof used
slab
x
38mm
instead x cement
of 4mm mortar (IS Grade
over 0.5
Aluminium Sqm but upto 1.0
45 099062 Extra for Extrusion)
providing edge with 119.14 1 metre 50.00 5957.00 500.00 500.00
Sqm
stainless
moulding to steel 16mm to fastening
20mm
46 099072 system
etc., forofcutting
Extra- Granite Hilti/Fischer
work groove Dash upto 166.33 1 Sqm 40.00 6653.20 40.00 40.00
Fasteners
5mm wide and on 6mm defacade, etc., -
horizontal
In Granite work / vertical surfaces
of columns, suspended
47 099083 ceiling, sills,
Polished stone jambs, tile canopies
work for 1323.66 1 Sqm 75.00 99274.50 380.00 380.00
etc.
wall liningand (dado) makingo etc., 25mm-
grooves
8mm for thick andsuperiorapplyingquality non
48 099102 Extra
staining providing
andgranite non tiles opening
streaking of 423.59 1 Each 30.00 12707.70 30.00 30.00
(RUBY
required Red)
sealant 789 or 991 HP with-
size and s etc., Openin
49 106090 Opening
Providing
Baker Rod ofand area fixing
complete above 100
asTiledper 398.46 1 g
Sqm 120.00 47815.20 400.00 400.00
sq
Falsecm Ceiling
approved shop drawings Tiles and of
50 106220 approved
as
Dismantling materials
per specifications and removing of size
(straight 61.55 1 Sqm 16.00 984.80 200.00 200.00
595x595mm
and
Particlecurved).Board, in Only
true horizontal
Asbestos exposed or
level
surfaces sheets
similar tosuspended
be measuredceiling on
and
and
51 111022 15 mm cement plaster on the 77.03 1 Sqm 129.00 9936.87 200.00 200.00
interlocking
paid.
stacking metal grid or of
rough sideupto of single50 metres
galvanized
part thereof steel sections
52 111051 o etc.,
15 mm cement- 1:6 (1cement: 6 fine 79.48 1 Sqm 650.00 51662.00 1000.00 100.00 1100.00
(galvanized @ plaster on the
sand)
rough side of single
170gsm/sqm) consisting of
53 115060 o
mainetc.,“T”one
Applying - runners
1:4
coat of (1cement:
suitably
cement 21.75 1 Sqm 1970.00 42847.50 5000.00 5000.00
4coarse
spacedofsand)
primer at joints to get
approved
requiredand
brand length and of size
manufacture on
54 115090 24x38mm
wall surface
Wall painting madeon from new 0.30mmwork 53.05 1 Sqm 1970.00 104508.50 3000.00 3000.00
thick
with two(minimum)
or more sheet coats spaced
at
of 1200mm
plastic centre topaint
emulsion centre of
55 115091 Wall
and painting
cross brand “T” new
on of work size 10.39 1 Sqm 1970.00 20468.30 3000.00 3000.00
approved
with two ormade more of coats and
24x25mm
manufacture to over
give an even
56 117081 o
Oil etc.,
0.3mm - thick
bound Extradistemper(min.)Items sheet,for
after 56.16 1 Sqm 105.00 5896.80 600.00 600.00
shade
roller painting in lieu of normal
1200mm old white
removing longspaced
etc., - Two
brush
or morepainting
between main
coat, ifgive
to“T” specifically
atsynthetic
600mm
an even
57 121061 Painting
ordered with 70.42 1 Sqm 4.00 281.68 100.00 100.00
centre
shade to centre
enamel paint of approved to form a grid b
of
etc., - Two 1200x600mm or more coats and
on
58 121211 Powder
secondary coating/50
crossan“T” microns
of length 34.32 1 Sqm 145.00 4976.40 300.00 300.00
newspray
by workmethod over for under
all etc.,coat-
600mm
of suitableand size shade 24x25mm with
59 121212 Surfaces
Powder
made of over
coating/50
0.30mm 10 micronscm.thick in 10.47 1 metre 1200.00 12564.00 1200.00 1200.00
ordinary
width/girth paint of approved
by spray
minimum method sheet for all
to etc.,be-
brand and manufacture
60 132141 Surfaces
interlocked upto
Providing at middle
and 10 ofcm. the
fixingin 49.04 1 Each 60.00 2942.40 100.00 100.00
width/girth
1200x600mm
unplasticised PVC and
panel not
to form
connection in
conjunction
grids
45 cm of length etc., with - 15 similar
mm
61 132190 Providing and fixing C.P. 365.47 1 Each 18.00 6578.46 18.00 18.00
painted
600x600mm
nominal surfaces
bore wall angle of
brass long nose bib cock, 15
size 21x21x 3mm and laying
62 132200 mm
Providing nominal fixing bore, C.P. of 369.36 1 Each 70.00 25855.20 70.00 70.00
false ceilingand tiles of approved
approved
brass quality conforming
texturelong in the bodygrid bib cock, 15
including,
to
mm IS standards
nominal andbore, weighing of
63 134011 wherever
Providing and810 fixing required,
PTMT bib 141.77 1 Each 142.00 20131.34 142.00 142.00
not less than
approved quality gmsconforming
cutting/making
cock of appro etc., openings - 15mm for
to IS standards
services
nominal like and weighing
bore,diffusers, grills,
64 136160 Cutting holes up86mm to 30x30cm long. 94.88 1 Each 50.00 4744.00 100.00 100.00
not
light less
Weighing than
fittings, 690 gms
fixtures, smoke
in walls including than
not less making 88
detectors
gms the same
good etc. :
65 136170 Cutting holes up to 15x15cm 107.20 1 Each 75.00 8040.00 75.00 75.00
in RCC floors and roofs for
66 136180 passing
Making drain chases pipe etc. up and to 44.71 1 metre 100.00 4471.00 100.00 100.00
repairing in
7.5x7.5cm thewalls hole includingafter
insertion good
making of drain pipe etc.
67 136190 Making up and
hole concrete to 20x20 finishing cm 53.02 1 Each 70.00 3711.40 70.00 70.00
with
with cement
matching surface after
and embedding pipes up to
1:2:4 (1
housing G.I. cement
pipe etc. :2 coarse
68 138043 150mm
Hoisting, diameter
fitting and in masonry
fixing in 1192.40 1 Each 16.00 19078.40 6.00 6.00
sand: 4 graded stone
and
position filling
plastic with
m etc.,nominal cement
- 1000
aggregate 20mm
concrete
ltr capacity 1:3:6
tank (1 cement :3
69 138044 size)
Hoisting, including
fitting and fixing finishing in 1479.77 1 Each 28.00 41433.56 30.00 30.00
coarse sand so 6as graded stone
complete
position plastic m to make
etc., - 2000 it
aggregate 20mm nominal
leak
ltr proof tank
capacity
size) including disposal of
malba
As per Agreement PROP REQ QTYS As per requi
SSR/NS
SI. No Description of work Rate Unit
Item.No
Qty Amt Qty
70 141012 Providing, laying and jointing 205.15 1 metre 50.00 10257.50 50.00 50.00
glazed stoneware pi etc., -
71 141051 150mm diameter
Providing and fixing square- 1087.30 1 Each 5.00 5436.50 5.00 5.00
mouth S.W. gully trap etc., -
72 151011 100x100mmand
Providing sizefixing
P typewater With 2854.42 1 Each 10.00 28544.20 12.00 12.00
F.P.S.
closet squatting bricksetc., - White class
designation
Vitreous China 75
73 151021 Providing and Orissa fixing pattern white 2660.44 1 Each 15.00 39906.60 20.00 20.00
W.C. pan of
vitreous china pedestal size 580x440- etc., -
mm
W.C. with
pan integral
with fixingISItype marked foot
74 151100 Supplying and white 1339.28 1 Each 25.00 33482.00 25.00 25.00
rests
white solid plastic seat and lid
vitreous china circular wash
75 151260 basin category
Providing and fixing white, No. 1004 818.79 1 Each 15.00 12281.85 20.00 20.00
group
vitreous I, size
china470 flatmm.
backdia or with
wall
CP brass
corner type pillar
lipped tap, front 32 urinal
mm.
76 152110 Providing and fixing 711.82 1 Each 15.00 10677.30 20.00 20.00
rubberof plug and CP brass
basin
600x450mm bevelled edge
chain,
430x260x350mm32 mm. CP brass and
77 152124 mirror
Providing , of5.5and mm thickmirror
fixing of float
of 1330.26 1 Each 10.00 13302.60 10.00 10.00
waste
340x410x265mm standard pattern
sizes
glass
5.5 mm (of thickness
approved o quality)
etc., -
connected
respectively with GI waste pipe
complete
upto floorwith 6mm thick
78 153440 Rectangular
Providing andshape
level and
fixing 32 Chard
1500x450 mm. P 456.75 1 Each 35.00 15986.25 35.00 35.00
board
dia CPground
(outer dimension) fixedand to wooden
brass brass trap
Bottle trap unions
brass31screws mm,
cleats with C.P.
79 153471 complete
single
Providing piece including
and fixing cutting
moulded of
C ht. P 109.85 1 Each 50.00 5492.50 60.00 60.00
and washers complete
and
270 mm,
brass making good
effective
grating wit thelength
etc.,walls of-
etc.
tall as a100
pipe
Grating complete
from mmcentre jobof waste
nominal dia.
80 153500 Providing and fixing Swan 438.55 1 Each 30.00 13156.50 30.00 30.00
coupling
and pillar
12 mm. highBrass) domed
neck tap (C.P. 15
260
shape mm, having 77 mm
wt. not spoutbreadthless
81 153531 mm dia.
Providing with swinging
and fixing 132.22 1 Each 50.00 6611.00 50.00 50.00
water25
than sealgms of minimum
having
25 mm,approx.
Basin/sink waste wt.(C.P.
1000Brass) gms
weighing approx. 260
82 153560 etc.,
gms - a) Waste
Providing and 32fixing mm Coat 58.12 1 Each 25.00 1453.00 25.00 25.00
hook "J" type two way
83 153570 (C.P.Brass) and fixing Soap
Providing 181.24 1 Each 35.00 6343.40 35.00 35.00
dish (C.P. Brass) having
84 154010 approx.
Providing wt.and220 fixing
gm 110mm 263.03 1 metre 300.00 78909.00 360.00 360.00
dia PVC soil, waste and vent
85 154030 pipes
Providing including
and fixing jointing
110 mm and x 166.94 1 Each 15.00 2504.10 15.00 15.00
cost
110 mm of spun x 110mm yarn and dia sand PVC
etc.
plain complete
branch (single
86 154040 Providing and fixing 110 equal mm x 180.33 1 Each 30.00 5409.90 65.00 65.00
junction)of
110 mm x 110mm the required
dia PVC
degreebranch
plain including jointingequal
(single and
87 154060 Providing and fixing 110 mm x 216.34 1 Each 10.00 2163.40 15.00 15.00
cost of spun the
junction)of yarn and sand
required
110 mm x 110mm dia PVC
etc.,
degree completewith (double access door
88 154070 plain
Providingbranch and fixing 110 equal mm x 105.82 1 Each 10.00 1058.20 10.00 10.00
inclusive of
junction) of the 3mmrequired thick
110 mm x 5mm PVC plain
bitumastic
degree with felt washer
accessunequal and
door
89 154080 branch
Providing (single 150.14 1 Each 10.00 1501.40 10.00 10.00
bolts
inclusive andand fixing
ofnuts, 3mm 110 mm
complete, thick x
junction)
110 mm xjointingof
5mm xand the 5 mm required
including
bitumastic felt washer the PVC cost
and
degree with
branch double accessunequal door
90 154092 of spunand
Providing
bolts yarn
and and
fixing sand110 thicketc.,
mm 82.15 1 Each 20.00 1643.00 20.00 20.00
inclusive
junction)of ofnuts,
the 3mm complete,
required
complete
PVC offset
including jointing including j
and costand etc., of-
bitumastic
degree with felt washer
access door
91 154100 (b)
spun Withyarn
Providing 15 cm
and and projection
fixing sand 110 etc.,
mm 97.29 1 Each 20.00 1945.80 40.00 40.00
bolts
inclusive and nuts,
of 3mm thick complete,
complete
PVC Plain feltbend and of
including jointing costandthe
of
bitumastic washer
92 154110 required
spun
Providing yarn degree
and and with
fixing sand 110 access
etc.,
mm 134.46 1 Each 30.00 4033.80 35.00 35.00
bolts and nuts, complete,
door inclusive of ofthe 3mm
complete
PVC
includingbend jointing and the thick
requiredcost
bitumastic
degree withfelt and washer,
access bolts
door
93 154130 of spun yarn
Providing and fixing sand110 etc.,
mm 76.66 1 Each 10.00 766.60 10.00 10.00
and nuts,
inclusive complete,
of (loose including
3mm socket) thick
complete
PVC collar
jointing
bitumastic and cost of
felt washer, spun yarn
bolts
94 154140 including jointing
Providing andcomplete and 75
fixing cost mm of 140.19 1 metre 125.00 17523.75 125.00 125.00
and sand
and nuts, etc.
complete, including
spun
PVC yarn
soil, and
waste sand
and etc.
vent
jointing and cost of spun yarn
complete
95 154160 pipes
Providing including
andcomplete jointing
fixing 75mm and x 76.66 1 Each 10.00 766.60 10.00 10.00
and sand etc.
cost
75 mm of spunx 75 yarn mm PVC and sand plain
etc.,
branch complete (single equal
96 154170 Providing and fixing 75mm x 85.02 1 Each 25.00 2125.50 25.00 25.00
junction)of
75 mm x 75mm the dia required
PVC
degree
branch including
(single fixing jointing
equal 75 junction) and
97 154190 Providing 130.39 1 Each 10.00 1303.90 10.00 10.00
cost and mm x
the the
of of spun yarn and
75 mm xrequired75 mm xdegree with
sand etc.,
access door complete
inclusive of 3mm
98 154203 75 mm PVC
Providing and fixing plain 75 branch
mm 54.28 1 Each 10.00 542.80 10.00 10.00
thick bitumastic
(double equal felt washer
junction) of the
dia PVC offset etc., - With 15
including
required jointing and
degree with access cost of
99 154220 cm projection
Providing and fixing 8 cm 74.06 1 Each 20.00 1481.20 30.00 30.00
spun yarn
door inclusive of and sand etc.,
PVC
3mm bend thick ofbitumastic
complete the required felt
100 154240 degree
Providingand with
andbolts access
fixing door
75 nuts,mm 47.34 1 Each 10.00 473.40 10.00 10.00
washer and
inclusive
PVC of (loose
collarincluding 3mm socket) thick
complete, jointing
bitumastic
including feltspun washer, bolts
101 155063 and cost jointing
Supplying of
and and
fixing yarn cost
pipe andof
as 102.10 1 metre 100.00 10210.00 100.00 100.00
and
spun nuts, complete,
yarncomplete and pipe sandincluding etc.-
sand etc.,
outlet or waste etc.,
jointing
complete and cost of spun yarn
102 155070 PVC
Supplying50 mm bore
fixing1.7
andcomplete mm
granite 2016.97 1 Sqm 10.00 20169.70 10.00 10.00
and sand etc.
thick superior quality black
stone
103 155141 20 to 25mm thick
Providing andin masonry fixing 64.75 1 Each 50.00 3237.50 50.00 50.00
or concreteplated
Chromium as abrass Purdah waste to
urinal
p etc., range
- 32 mm etc. stone to be
104 155170 Providing and fixing Towel 208.19 1 Each 40.00 8327.60 40.00 40.00
machine cut & well polished
ring (C.P.) of approved make
on all faces and the edges to
170 mm dia by having approx.
105 155180 be moulded
Providing and semi-circular fixing 175.57 1 Each 15.00 2633.55 30.00 30.00
weight 490 gm
rounding
Connector and(C.P.)polishing. with
106 155230 NOTE
Supplying: fitting
coupling The and following
fixing 176.63 1 Each 40.00 7065.20 40.00 40.00
percentage
15
soap mmtrayx 450 ofismm to long
be added /
size150x150mm
deducted incase oftype)
vitreous (concealed graniteswith
other than superior
all necessary fittingsquality etc.
black. i) For superior
completed as directed by the quality
As per Agreement PROP REQ QTYS As per requi
SSR/NS
SI. No Description of work Rate Unit
Item.No
Qty Amt Qty
107 181021 Demolishing plain cement 510.54 1 cum 112.20 57282.59 98.00 14.20 112.20
concrete including dispos
108 181040 etc., - over
Extra 1:2:4Item
or richer
Nos. mix181021with 223.44 1 cum 30.00 6703.20 30.00 30.00
max.
and 181050 20 mm coarse
if pavement
aggregate
breaker is used brick on orders of
109 182013 Demolishing work 431.31 1 cum 31.00 13370.61 40.00 40.00
Engineer
including stacking of serv etc.,
110 182023 - In cement
Extra for mortar
removing mortar 1413.93 1000 Nos. 3.35 4.74 3.35 3.35
from bricks and cleaning etc.,
111 183020 -Dismantling
From brick work tile inwork cement in 24.32 1 Sqm 1432.00 34826.24 1432.00 1432.00
mortar
floors/dado/skirting laid in
112 185010 cement
Dismantlingmortar/doors, chemical
windows 106.53 1 Each 109.00 11611.77 170.00 170.00
mortar/synthetic
and clerestory windows adhesive
(steel
including
or wood) stacking including
material
113 185020 Taking out shutter
doors, windows, 40.51 1 Each 18.00 729.18 18.00 18.00
within 50m lead
chowkhats,
clerestory window, architrave,
cupboard
holdfastsonly
shutters in CC (steelor or masonry
wood)
114 185070 Taking out existing plywood 20.98 1 Sqm 30.00 629.40 30.00 30.00
etc. complete
including stacking and
withinstacking
(including laminations if any)
within
50many 50m lead
lead
115 185080 of
Taking thickness
out existing frombroken door, 53.22 1 sqm 65.00 3459.30 65.00 65.00
windows
glass panespartitions, boards,
from existing
furniture
door, etc including
windows, partitionsfittings
etc.
116 186012 Dismantling steel work in 0.51 1 Kg 1100.00 561.00 1100.00 1100.00
as beading
including and borders
stacking/disposal
single section etc., -
including stacking.
117 188021 Channels, angles,
Dismantling G.I. /PVC teespipes and 33.02 1 metre 150.00 4953.00 150.00 150.00
flats/ rounds
(external work)oretc., any- other Upto
rolled
40mmshape.
dia G.I. /PVC pipes
118 188022 Dismantling 37.18 1 metre 100.00 3718.00 100.00 100.00
(external work) etc., - Above
119 188031 40mm dia rain water pipe of
Dismantling 15.84 1 metre 50.00 792.00 50.00 50.00
G.I, C.I, M.S, SCI, etc., - Dia
120 188032 of 80mm andrain
Dismantling below water pipe of 16.36 1 metre 200.00 3272.00 270.00 270.00
G.I, C.I, M.S, SCI, etc., - Dia
121 188040 of above 80mm
Dismantling of flushing cistern 202.29 1 Each 25.00 5057.25 30.00 30.00
of any size including stacking
122 189040 of serviceable
Dismantling gypsummaterials and
partitions 13.92 1 sqm 278.00 3869.76 278.00 278.00
disposal
including of unserviceable framework
123 189082 materials
Dismantling within
(Aluminium/steel),and
of old50mS.W.leadpipes
false 39.93 1 metre 50.00 1996.50 50.00 50.00
ceiling including
including breakingstackingo etc., of-
124 189120 serviceable
150mm
Taking diameter
out Wash material
hand basin and 158.64 1 Each 25.00 3966.00 25.00 25.00
disposal
and of unserviceable
sink complete with all
material within 50m
parts including lead good
making
125 257050 Supply of Polyethylene Vinyl 5.75 1 litre 72000.00 414000.00 72000.00 72000.00
the walls complete,
Chloride water storage if required
tank
126 257370 with cover
Supply of and suitable
Miscellaneous 287.50 1 Kg 20.00 5750.00 20.00 20.00
locking arrangement
UPVC fittings
Schedule C (Cement )
1 033062 Supply and using cement at 4600.00 1 Tonne 80.54 370488.60 85.64 as per cal 105.00
worksite :OPC 53 grade
SCHEDULE C TOTAL 370488.60
Schedule D ( G I steel )
As per Agreement PROP REQ QTYS As per requi
SSR/NS
SI. No Description of work Rate Unit
Item.No
Qty Amt Qty
1 131131 Providing and fixing G.I. pipes 124.61 1 metre 460.00 57320.60 50.00 1300.00 1350.00
complete with G.I etc., - 15
mm dia. nominal bore
2 131132 Providing and fixing G.I. pipes 152.67 1 metre 106.00 16183.02 50.00 100.00 150.00
complete with G.I – Exposed
on wall etc., - 20 mm dia.
nominal bore
3 131133 Providing and fixing G.I. pipes 207.78 1 metre 92.00 19115.76 100.00 150.00 250.00
complete with G.I Exposed on
wall etc., - 25 mm dia.
nominal bore
4 131135 Providing and fixing G.I. pipes 300.34 1 metre 29.00 8709.86 50.00 50.00
complete with G.I Exposed on
wall etc., - 40 mm dia.
nominal bore
5 131136 Providing and fixing G.I. pipes 382.63 1 metre 469.00 179453.47 150.00 319.00 469.00
complete with G.I – Exposed
on wall etc., - 50 mm dia.
nominal bore
6 131141 Providing and fixing medium 172.64 1 metre 100.00 17264.00 100.00 100.00
grade G.I. Concealed pipe
etc., - 15 mm dia. nominal
bore
7 131142 Providing and fixing medium 196.68 1 metre 50.00 9834.00 50.00 50.00
grade G.I. Concealed pipe
etc., - 20 mm dia. nominal
bore
8 131143 Providing and fixing medium 247.44 1 metre 100.00 24744.00 100.00 100.00
grade G.I. etc., - Concealed
pipe 25 mm dia. nominal bore
9 131156 Providing and fixing medium 335.65 1 metre 693.00 232605.45 930.00 930.00
grade G.I. etc., - 50 mm dia.
nominal bore
10 131161 Making connection of medium 231.04 1 Each 10.00 2310.40 10.00 130.00 10.00
grade G.I. distributio etc., - 25
to 40 mm nominal bore
11 131162 Making connection of medium 520.14 1 Each 6.00 3120.84 6.00 6.00
grade G.I. distributio etc., - 50
to 80 mm nominal bore
12 132031 Providing and fixing gun 339.74 1 Each 20.00 6794.80 20.00 20.00
metal gate valve with C. etc.,
- 25 mm nominal bore
13 132033 Providing and fixing gun 527.98 1 Each 10.00 5279.80 10.00 10.00
metal gate valve with C. etc.,
- 40 mm nominal bore
14 132034 Providing and fixing gun 819.15 1 Each 8.00 6553.20 4.00 40.00 44.00
metal gate valve with C. etc.,
- 50 mm nominal bore
15 132081 Providing and fixing gun 732.27 1 Each 4.00 2929.08 4.00 4.00
metal non- return valve etc., -
Horizontal
775805.95
TOTAL OF SCHEDULE 'D'
4 109410 NS-210-96 Providing and 946.33 1 Sqm 105.00 99364.65 400.00 400.00
fixing false celing with light
weight calcium silicate celing
tiles , of size 595X595X10mm
with densified 1 The material
should be incomustible as per
BS 476 Part IV
2.
The material should be 100%
humidity resistant
8 153410 Providing and fixing Towel rail 385.14 1 Each 0.00 0.00 25.00 25.00
(C.P.)brass15 mm dia x 600
mm long having approx.
wt.500 gm
9 048031 Supplying cement / epoxy 81.35 1 kg 0.00 0.00 300.00 300.00
grout and sealing of cra etc.,
10 048040 -Supplying,
Using cement fittinggrout
and fixing 92.96 1 Each 0.00 0.00 500.00 500.00
nipples with approved fixing
11 151110 compound
Providing and after making
fixing white, 1042.84 1 Each 0.00 0.00 17.00 17.00
grooves china
vitreous 10mmpedestal
wide andfor
10mmbasin
wash deep,completely
drilling holes for
12 099175 Providing and fixing 18mm 1961.48 1 Sqm 0.00 0.00 200.00 200.00
grouting
recessed along thecracks
at polis back in CC/
for
thick mirror etc., - the
RCC structures,
reception of pipes sealing
and of
fittings
13 081031 Granite
StructuralPink. Area
steel work of slab
welded 80.00 1 Kg 0.00 0.00 1000.00 1000.00
grooves including subsequent
over
in 1.0up
built Sqm butand
se etc., upto 2.0
- In sealing
RSJ,
cutting/ removal
Sqm theOr
tees, larger
angles and
14 109230 of
Supply holes
and of channels
nipples
Installation, 543.10 1 Sqm 0.00 0.00 72.00 72.00
Note
after for
including Item
grouting
lifting081030
by the
to all : Purlins
heights
and wind bracings
approved
as required, shall be
fixing compound,
paid separately
complete as under
trapezoidal/corrugated per item
81010.
specification.
sheeting system in galvalume
colour coated steel having
cover width of 1000 mm, 35
As per Agreement PROP REQ QTYS As per requi
SSR/NS
SI. No Description of work Rate Unit
Item.No
Qty Amt Qty
15 151031 Providing and fixing white 4208.21 1 Each 0.00 0.00 2.00 2.00
vitreous china pedestal etc., -
W.C. pan with ISI marked
white solid plastic seat and
lid.
SCHEDULE 'F'TOTAL 0.00
7919092.47
Excess Excess
As per requirement Up to 25% Excess 40% to 50% Total savings
25% to 40% 50% and above
Amt Qty Amt Qty Amt Qty Amt Qty Amt Qty
11721.45 7.500 1352.48 4.500 811.49 3.000 540.99 20.00 3606.60 0.000
3869.76 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.00 0.000
244.27
9936.47
Financial Implication
Excess up to 25 % : 872761.35
Excess % 48.30
Savings % 3.13
Sr DEN/Co-Ord/SC
ADEN/SW/SC
ide quarters .
Remarks
Total savings Total Excess
6024.79 1734639.76
1445.95 416313.54
7470.74 2150953.30
179538.12 0.00
61042.96 0.00
240581.08 0.00
0.00 25877.62
0.00 138389.02
Remarks
Total savings Total Excess
0.00 265795.21
0.00 82396.52
0.00 348191.73
0.00 394933.30
0.00 15797.33
0.00 410730.63
0.00 707702.27
0.00 169848.54
0.00 877550.81
7470.74 2150953.30
240581.08 0.00
0.00 138389.02
0.00 348191.73
0.00 410730.63
0.00 877550.81
248051.83 3925815.49
r DEN/Co-Ord/SC
0.00 101+199=300
0.00 675+425=1100
0.00 338+212=550
0.00 0
0.00 0
0.00 0 25.6648
4.04 1.00
4.04 24.00
0.625 14.00
0.00
0.00
0.143 24.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00 60+103=163
0.00
0.02 1.00
0.124 87.00
0.124 37.00
0.00
0.087 1.00
0.00
0.00
0.067 25.00
0.00
0.00
0.00
0.043 9.00
0.065 72.00
0.00
0.00
0.00
0.00
0 0.00
0 0.00
0 0.00
0.00
0.00
0.00
0.00
0.03 3.00
0.01 1.00
0.01 1.00
0.02 1.00
0.00
0.00
0.032 2.00
0.27 1.00
0.05 1.00
0.002 0.00
0.015 0.00
0.02 0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.05 1.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00 111.3
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.01 1.00
0.01 1.00
0.01 1.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.01 1.00
0.01 2.00
0.00
0.015 0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.01 0.00
0.087 17.00
1113.00 111.3
0.002 0.00
SOUTH CENTRAL RAILWAY FIRST VARIATION
Name of work: SW-1 Sanchalan Bhavan : proposed Repair to Test room at Ground Floor ,Staff area of Sr.DME office ,Sr DFM office and Tollet blocks of Cellar ,first, second,
Third & fourth floor on Canteen side . SW-2 ;- Hyderabad : proposed Repairs to water supply arrangements osn SP-2 side quarters .
Agt.SK/05/2015 Agency : N. Bhasker Rao h-no 5-4-7/2 Ramaiahnagar Kukatpally HYD -72.
Loading/Unloading ballast,
kankar, brickbats,
Leading ballast, kankar, stone-
chips,
brickbats,shingle, stone-chips, stone As per Agreement
boulders,stone
SSR/NS shingle, block boulders, kankar,
SI. No Earth Description
workstones of work as
in excavation Rate Unit
pitching
Item.No block kankar, , rubble
pitching
per approved
stones, laterite, drawings
coal, surkhi,and Qty Amt SW-1 SW-2 CC-III cc 4 total Qty proposed qty
stones,
dumping rubble
atsand embankment stones,
dry mortar,
laterite, coal, , moorum,
surkhi, dry
Schedule 'A - 1' site ormanure spoil heap, within
earth,
mortar, sand, or moorum,
sludge,
railway land,
ashes, lime etc., including 50m
including
earth,
lead manure or etc.,sludge,
lead and up 1.5m lift,
to debris, 50mmuck, -andAll cum
1 011011 ashes,
kinds of lime,
Providing
stacking soils and
into/from laying
trucks, 100.28 1 204.00 20457.12 4.167 169.088 173.26 204.00
malba,
cement concrete, up 25
etc. for lead upto to
trailors
km. Note or wagons Cum
plinth in : retaining
Lead under this
walls,
2 021070 Providing
item is payableand laying
when in
the 46.62 1 806.80 37613.02 386.997 301.92 688.92 806.80
etc., - 1:2:4 (1 cement : 2
position
same sand exceeds 4M graded 20
500m. Grade Cum
3 021090 Extra
concrete for: every for subsequent
reinforced
stone
59.54 1 405.90 24167.29 193.498 150.96 344.46 405.90
aggregate
3m height ( or 20mm nominal
concrete etc.,part - Allthere work of
)size)above floorlevel, two level from cum
4 031023 upto
plinth
plinth
level for
including
concrete 2309.45 1 99.00 228635.55 24.022 14.589 38.61 99.00
raft foundation of washable
work in superstructure
aprons, HS tank, pile cap, cum
5 033010 Providing
footings of and FOB, laying and in 163.95 1 48.00 7869.60 48.00 0.00 26.857 26.86 48.00
Platform shelter
position M 20 etc. Grade cum
6 041011 concrete
Centering and shuttering for reinforced 2326.70 1 29.70 69102.99 29.70 0 26.361 26.36 29.70
concrete
etc., for etc., - Walls -All work (any in
buildings above plinth
thickness) level
including
Centering
upto floor two andlevel. shuttering cum
attached
etc., for - Suspended plasters,
floors,
7 041012 buttresses, plinth and string 2530.27 1 13.90 35170.75 13.90 0 16.312 16.31 17.00
roofs, landings, balconies,
courses
FOB etc. Sqm
8 042012 slabs, walkway slabs and 227.70 1 197.20 44902.44 197.20 0 95.823 95.82 100.00
access platform Sqm
9 042013 Providing, hoisting and 230.70 1 91.30 21062.91 91.30 0 27.72 27.72 30.00
fixing in position upto floor
two level M20 Grade
precast RCC hoisting
Providing, work etc., and - In
small
fixing inlintels position upto upto1.50m floor cum
10 043012 two
clear span level M20 Grade 3788.40 1 0.25 947.10 0.25 0.047 0.05 0.25
precast RCC
Brick work with non- work etc., - In
Shelves, (FPS) cantilevers,
modular bricks of
chajjas,
class sunshades etc. cum
Extra etc., over - item Cement 051010 mortar &
11 043014 1:6 (1 cement : 6 coarse 3770.47 1 6.00 22622.82 6.00 0.717 0.72 6.00
051020 for brick work in
sand)
superstructure beyond cum
12 051018 plinth level upto floor two 2277.09 1 3.50 7969.82 3.50 4.181 4.18 6.50
level : cum
Extra for brick work in
13 051040 166.76 1 3.00 500.28 3.00 4.181 4.18 6.50
superstructure beyond
second
Half brick floor masonrylevel for every with
3m or part
bricks of thereof
class designatio : cum
14 051050 etc., - Cement mortar 1:3 (1 327.89 1 6.00 1967.34 6.00 15.747 15.75 16.00
Add
cement
Providingor deduct
: 3and coarse from
fixing rates
sand) 25mm of Sqm
15 brickwork
051181 thick cup board when the b etc.,,
shutters 272.84 1 170.00 46382.80 170.00 78.952 78.95 170.00
-with Deduct prelaminated for Class flat
Add or deduct
designation from rates of
pressed 3 5 layer particle cum
16 brickwork
057103 board when the to
conforming b etc., IS -538.85 1 20.00 -10777.00 20.00 0 0.00 6.50
-12823 Deduct
Providing -Grade wood for
I, fixing
having Class
workflush one in
Providing
designation and3.5 cum
frames
side
door of doors,
decorative
shutters to IS:windows,
laminationc
17 057104 of etc., - Second class thick and -655.33
teak 1 10.50 -6880.97 10.50 0 0.00 6.50
22 approved
etc., - 30mm shade
wood
other
including sideISI balancing marked cudm
18 071011 lamination
stainless steel including
butt hinges 69.49 1 1100.00 76439.00 1100.00 0 0.00 200.00
Extra
second
with necessaryforclass providing
teak wood
screws and Sqm
19 072152 fixinglipping flush doors with teak 1038.69 1 20.00 20773.80 20.00 0 0.00 20.00
veneering on thick
25x12mm one sidewith in
item No.072150
necessary screws and Sqm
20 072160 nickel plated bright finished 351.93 1 12.00 4223.16 12.00 0 0.00 0.00
MS piano hinges complete Sqm
21 073030 Providing and fixing 2576.73 1 74.00 190678.02 74.00 29.716 29.72 74.00
decorative laminated plastic Sqm
22 074351 Providing
etc., - 1 mm and thick fixing bright 226.49 1 40.00 9059.60 40.00 0 0.00 40.00
finished
Providingbrass and fixing handles etc.,
special Each
23 077072 quality
- 100mm bright finish 88.23 1 30.00 2646.90 30.00 0 0.00 30.00
cupboard
Providing
Providing and or fixing
and ward
fixingof robe
fibreIS: Each
24 077121 glass
locks etc.,
3564 - 40mmaluminium
reinforced
marked plastic 98.01 1 30.00 2940.30 30.00 0 0.00 30.00
(FRP)
Door door closureext frames of etc.,three-
legged
Hardwyn of cross-
make section
(Eddy) 90
or Each
Providing
mm x 45 mm and
having fixing
single
25 077191 Providing
equivalent
magnetic andcatcher fixing 30 mmISI 1116.39 1 14.00 15629.46 14.00 0 0.00 14.00
rebate
thick of
glass fibre necessary
reinforced
marked
32 mmpanelled
x 15 with mm to receive Each
26 077600 (FRP)
screws
Providing
shutter etc.
of 30and complete
mm
door shutter
fixing and ISI 27.08 1 14.00 379.12 14.00 0 0.00 14.00
of required colour
marked aluminium
thickness.
approved The
brandlaminatebutt and hin Each
27 078012 dooretc., -
Providing 125x63x4mm
frame
manufacture, moulded
and with
made with
fixingfire 84.25 1 150.00 12637.50 150.00 120 120.00 150.00
fire
aluminium
retardant retardant
sliding doorgrade bolts
grade Each
28 078021 unsaturated
etc., - 300x16mm
unsaturated
Providing polyester
polyester
and resin
resin,
fixing 95.91 1 43.00 4124.13 43.00 40 40.00 50.00
and
moulded chopped
aluminiumto tower mat.
3 mm thick boltsFRPDoor ISI Each
29 frame
078033 laminate
mar etc., laminate
for
- farming
200x10mm shallhollow be 2 39.26 1 43.00 1688.18 43.00 40 40.00 50.00
Providing
mm thick and
shall be fixing
rails
aluminium andand handlesstyles, filled
I etc., with
with suitable
wooden framewooden and suitable block- Each
30 078061 Providing
125mm
in all the and
three legs.wood fixing
The 17.85 1 104.00 1856.40 104.00 40 40.00 104.00
blocks
aluminium of seasoned hanging floor
frame shall
inside etc.,at required be covered
places with
for
door
fibre glass - Twin all rubber Each
31 fixing
078072 stopper of from fittings, sides.
cast 59.61 1 25.00 1490.25 25.00 0 0.00 25.00
M.S. stay shall with
monolithically be provided
5 mm
at the bottom
thick FRP laminate for to ready the
frame and conforming to
panels RM
32 078310 (IS:14856 510.24 1 230.00 117355.20 230.00 181.67 181.67 230.00
2000) complete
Providing and work fixing Sqm
33 078320 anodised aluminium work 2258.43 1 85.00 191966.55 85.00 48.461 48.46 70.00
etc., - For fixed portion Kg
34 082011 345.16 1 871.00 300634.36 900.00 816.334 816.33 1150.00
38mm x 4mm (IS Grade
Providing Extrusion)
Aluminium and fixing
with
anodised
stainless aluminium steel fastening work
etc., - For
system openable/sliding
of Hilti/Fischer Dash
portions and fixing
Fasteners on hinges facade,/
Providing As per Agreement
SSR/NS pivots,
horizontalPVC/ /and
vertical fixing
neoprene
surfacesTiled
SI. No False
gasketDescription
Ceiling and
required of work
Tiles making of Rate Unit
Item.No of columns, suspended
approved
provision and
ceiling, materials
for fixing
sills, fixing of size
jambs, of Qty Amt SW-1 SW-2 CC-III cc 4 total Qty proposed qty
Providing 12mm
595x595mm
fittings.
canopies (Fittings
etc. and inshall making true
be
thick prelaminated
Providing and fixing thre etc.,
glazing
horizontal level suspended
-paid
25mm for separately)
Prelaminated
in aluminium grooves
dmetal
etc., grid particleand
- With
Kg
35 on interlocking
082012 applying nonglass staining andof 353.19 1 215.00 75935.85 400.00 334.467 334.47 400.00
board
float/frosted with decorative
panes of
galvanized
non streaking steel sealant sections
lamination
5.5mm on both
thickness sides789 Sqm
(galvanized @ Baker Rod
36 082022 or 991 HP with
(weight not less than 13.75 1017.77 1 47.00 47835.19 50.00 3.439 3.44 50.00
170gsm/sqm)
complete as consisting
per approved of
kg/sqm)
main “T” and runners Sqm
37
Providing
082032 shop drawings and suitably
fixing double
as per 768.14 1 117.00 89872.38 150.00 102.139 102.14 140.00
spaced
action hydraulic
specifications at joints etc.,to- With
(straight get
and
required
Stainless length
curved). Steel
Onlycover andexposed of size
plate Each
38 082041 24x38mm
surfaces to be
Providing made
andmeasured from
fixing 1837.16 1 4.00 7348.64 4.00 0 0.00 4.00
0.30mm
Providing
and paid. tiles
ceramic thick (minimum)
and conforming
fixing Ist Sqm
39 082080 sheet
quality
etc., - Of
Providing
spaced
ceramic
Group and
at
B-I-b 1200mm
etc.,of IS -:
fixing 1728.47 1 48.00 82966.56 48.00 31.663 31.66 48.00
centre
15622 to
300x450 mmcentre
(Ceramic and and above
Tiles) cross of Sqm
40 ceramic
095013 “T” tiles
of size 24x25mm made conforming 671.29 1 700.00 469903.00 700.00 329.127 329.13 400.00
size
etc., - Of Group B-I-a095025 of IS :
Extra
of
200x200mm over items
to 400x400mm Sqm
15622
and
0.3mm (Vitrified
095026,
thick tiles)
if
(min.) of
adhesive size
sheet,
41 095023 above 400x400mm upto 656.15 1 275.00 180441.25 300.00 195.024 195.02 275.00
(recommended longspaced
1200mm by
600x600 mm
manufacturer
between main of tiles) “T” at of Sqm
42 095026 600mm
specifiedcentre
Providing thickness
and fixing to centre is18mmused to 775.21 1 792.00 613966.32 1050.00 670.748 670.75 1000.00
instead
thick
form of cement
a mirror
grid polismortar
of 1200x600mm etc., - Sqm
43 095030 and
Granite
secondaryBlack. Area crossof“T” slabof 40.15 1 100.00 4015.00 800.00 460.963 460.96 675.00
over 0.5 600mm
length Sqm but upto and 1.0 size
Sqm for made
24x25mm
Extra providing of 0.30mm edge Sqm
44 099034 thick
moulding minimum to 16mm sheet to 20mm to be 2499.87 1 15.00 37498.05 15.00 9.856 9.86 15.00
interlocked
etc., - Granite at middle
work of the metre
45 099062 1200x600mm panel to form 119.14 1 50.00 5957.00 550.00 444.8 444.80 450.00
grids
Extra offor cutting groove
600x600mm
upto 5mm wall and
wide angle 6mm of
Polished stone tile work for
size
de etc., 21x21x
- In (dado)
Granite 3mm and
wall lining owork etc., - Sqm
46 099072 laying
8mm for false
thickprovidingceiling
superioropening tiles
quality of 166.33 1 40.00 6653.20 100.00 0 0.00 0.00
Extra
approved texture in the grid
(RUBY
of required Red) granite
size and stiles
etc., - Sqm
Each
including, wherever
47 099083 Opening of area above 100 1323.66 1 Openin 75.00 99274.50 500.00 342.432 342.43 350.00
required, cutting/making
sq cm
openings forand services like g
48 099102 Dismantling
diffusers,Board, grills, Asbestos
removing
light fittings, 423.59 1 30.00 12707.70 30.00 16 16.00 30.00
Particle or
fixtures,
similar sheets smokeceiling detectors and Sqm
49 106090 stacking
etc. upto 50 metres or 398.46 1 120.00 47815.20 120.00 103.404 103.40 125.00
part
15 mm thereof cement plaster on Sqm
50 106220 the rough side of single 61.55 1 16.00 984.80 120.00 190.586 190.59 200.00
o
15 mm -cement
etc., 1:6 (1cement: plaster on 6 Sqm
51 111022 the
fine rough
sand) side of single 77.03 1 129.00 9936.87 129.00 137.446 137.45 150.00
o etc., -
Applying one coat of 1:4 (1cement: Sqm
52 111051 cement
4coarseprimer sand) of approved 79.48 1 650.00 51662.00 1000.00 781.78 781.78 800.00
Wall painting on new work
brand
with two and manufacture
or more on
Wall painting
wallplastic
surface on coats new work Sqm
of emulsion paint of
53 115060 with two or more coats
approved 21.75 1 1970.00 42847.50 3800.00 4289.544 4289.54 5300.00
o etc., - Extra brand over Itemsand for
manufacture
roller paintingto in give lieu an of Sqm
54 115090 even
normal shade 53.05 1 1970.00 104508.50 1970.00 1873.725 1873.73 2400.00
Painting with synthetic
brush
Oil
enamel painting
bound ofif approved
paintdistemper specifically after b Sqm
55 115091 removing
ordered
etc., - Two old or more whitecoats etc.,on- 10.39 1 1970.00 20468.30 1970.00 1873.725 1873.73 2400.00
Two or
new work more over coat, an tounder give
an even
coat shade shade with
of suitable Sqm
56 117081 ordinary paint of approved 56.16 1 105.00 5896.80 500.00 342.119 342.12 450.00
Powder
Powder coating/50
coating/50 microns
microns
brand
by and manufacture
by spray method
spray method for for all all etc.,
etc.,
57 121061 - Surfaces over 10 cm. in 70.42 1 Sqm 4.00 281.68 100.00 0 0.00 4.00
- Surfaces upto 10 cm. in
width/girth
width/girth and not in
58 121211 conjunction with similar 34.32 1 Sqm 145.00 4976.40 300.00 146.429 146.43 200.00
painted surfaces
59 121212 Providing and fixing C.P. 10.47 1 metre 1200.00 12564.00 1200.00 499.66 499.66 800.00
Providing
brass long nose and bib cock, fixing
unplasticised
15 mm nominal bore,PVC of
Providing and fixing C.P.
connection 45 cm quality
approved length
brass- 15
etc., long mm body bib bore cock,
conforming
Cutting
15 mm tonominal
holes
nominal IS standardsup
bore, to
of
Each
60 132141 15x15cm
and weighing in RCC not floors
less than
and 49.04 1 60.00 2942.40 100.00 72 72.00 72.00
approved quality
810
roofs gmsfor passing
conforming to IS drain
standards pipe Each
Providing and fixing PTMT
61 132190 etc. and repairing
and cock
weighing not less the than hole 365.47 1 18.00 6578.46 18.00 0 0.00 0.00
bib of appro etc., -
after
690 insertion of drain pipe
gms Each
15mm nominal bore, 86mm
62 132200 etc. with cement concrete
long. Weighing not less 369.36 1 70.00 25855.20 70.00 46 46.00 50.00
1:2:4
than 88 (1gms cement :2 coarse Each
Cutting
sand: 4 holes graded upstone to
63 134011 30x30cm in walls including 141.77 1 142.00 20131.34 142.00 0 0.00 142.00
aggregate
Making hole20mm up same tonominal20x20
making good
size)andincluding the : Each
Making
cm chases finishing
embedding uppipes to
64 136160 complete so as to make it 94.88 1 50.00 4744.00 70.00 86 86.00 90.00
7.5x7.5cm
up to 150mm in walls including
diameter in
leak proof
making
masonry good and and fillingfinishing with Each
65 136170 cement
with matching concrete surface 1:3:6after (1 107.20 1 75.00 8040.00 75.00 20 20.00 150.00
housing G.I.
cement pipe etc.sand 6
:3 coarse metre
66 136180 graded stone aggregate 44.71 1 100.00 4471.00 100.00 100 100.00 100.00
20mm nominal size)
including fitting
Hoisting, disposal andoffixing malbain Each
67 136190 position plastic m etc., - 53.02 1 70.00 3711.40 70.00 0 0.00 0.00
Supplying
1000 ltr capacity and fixing tank white Each
Hoisting, fittingcircular
and fixing in
68 138043 vitreous china
positioncategory plastic m
wash 1192.40 1 16.00 19078.40 16.00 0 0.00 16.00
basin No. etc., 1004-
2000 ltrI,capacity
Providing,
group size laying
470 tank mm. and
dia Each
Providing and fixing square-
69 138044 with
jointing
CPS.W.glazed
brass stoneware
pillar pi 1479.77 1 28.00 41433.56 28.00 0 0.00 28.00
mouth
Providing andgully traptap,
fixing etc.,
water-
32
etc., - rubber
mm.
100x100mm 150mm diameter
plug
size and
P CP- metre
70 closet squatting
141012 brass etc.,type 205.15 1 50.00 10257.50 50.00 0 0.00 0.00
With F.P.S.
White chain,
Vitreous 32 mm.
bricks class
China CP
brass
designation waste 75 of standard Each
Orissa
Providing patternand W.C. fixingwith pan
white of
71 141051 pattern
size connected
580x440-mm withGI 1087.30 1 5.00 5436.50 5.00 0 0.00 5.00
vitreous
waste pipe china
upto pedestal
floor level
integral
etc., 32 type
- W.C. footpanCP rests with ISI Each
and mm. anddia brass
72 151011 Providing
marked fixing plastic white, 2854.42 1 10.00 28544.20 10.00 10 10.00 10.00
trap
vitreousandwhite unions
china
solid
flat complete
back or
seat and lid cutting
including and Each
73 wall corner type
151021 making good the walls etc. lipped front 2660.44 1 15.00 39906.60 20.00 19 19.00 20.00
urinal basin of
as a complete job
430x260x350mm and Each
74 151100 340x410x265mm sizes 1339.28 1 25.00 33482.00 25.00 18 18.00 18.00
respectively Each
75 151260 818.79 1 15.00 12281.85 15.00 16 16.00 16.00
Providing and fixing
600x450mm bevelled edge
mirror , 5.5 mm thick of float
glass (of approved quality)
Providing
complete with and fixing 6mm C thick P As per Agreement
SSR/NS brass
hardDescriptionBottleground
board trap 31
fixed mm,to
SI. No of work Rate Unit
Item.No single
woodenpiece cleats moulded with ofC.P. ht.
Providing and fixing mirror Qty Amt SW-1 SW-2 CC-III cc 4 total Qty proposed qty
270
brassmm, screwseffective and length washers of
of
tall 5.5pipe
complete mm from thickness centre o etc.,of Each
76 152110 -wasteRectangular
coupling shape 711.82 1 15.00 10677.30 15.00 17 17.00 17.00
1500x450
260 mm, and 77 mm (outer
breadth
Providing
dimension) fixing C P Each
water
brass seal of minimum
grating wit etc., -
77 152124 25 mm, weighing approx. 1330.26 1 10.00 13302.60 10.00 6 6.00 6.00
Grating 100 mm nominal
260 gms
dia. and and 12 fixing mm. Swan high Each
78 153440 Providing
domed shape having wt. 456.75 1 35.00 15986.25 35.00 0 0.00 0.00
neck pillar tap (C.P. Brass)
not less
15 mm than dia. 25 with gms swinging Each
79 153471 spout having approx. wt. 109.85 1 50.00 5492.50 50.00 52 52.00 52.00
Providing and fixing
1000 gms
Basin/sink waste (C.P. Each
80 153500 Brass) etc., - a) Waste 32 438.55 1 30.00 13156.50 30.00 27 27.00 27.00
mm
Providing and fixing Coat Each
81 153531 Providing
hook "J" type and twofixing way 110 132.22 1 50.00 6611.00 50.00 49 49.00 50.00
Providing
(C.P.Brass)
mm
Providingx 110 mm andxfixing
and fixing Soap
110mm 110
dia Each
Providing
153560 mm and fixing 110mm
82 dish xPVC
PVC
Providing
dia
110
plainmm
(C.P. and
x 110mm
branch
soil,Brass) waste
(single
fixinghaving
dia
110
and
58.12 1 25.00 1453.00 30.00 0 0.00 25.00
PVC plainjunction)of
equal branch (single the
approx.
mm x 110wt.
vent pipesjunction)of mm 220 x gm110mm
including jointing dia Each
equal
required degree the
with
83 153570 Providing
PVC
and cost plainofand branch
spunfixing (double
yarn and
110 181.24 1 35.00 6343.40 35.00 0 0.00 15.00
required
access junction) degree
door including
inclusive of
equal
sand
mm x etc.
110 complete
mm x 5mm of PVC the metre
jointingthick
3mm and bitumastic
cost of spun felt
84 154010 required
plain
yarn
Providing branch
and and
degree (single
sandfixing
with
etc.,
110 263.03 1 300.00 78909.00 340.00 320.907 320.91 360.00
washer
access and door bolts and nuts,
inclusive of
unequal
complete
mm
complete, x 110 junction)
mm x 5mm of the
x 5 Each
3mm thickincluding
bitumastic jointingfelt
85 154030 required
mm PVCcostbranch degree with 166.94 1 15.00 2504.10 15.00 0 0.00 15.00
and the
washer
access and door
of spun
bolts anddouble
inclusive
yarn
nuts,
of
unequal
and sand junction)of
etc., complete the Each
complete,
3mm thickincluding
bitumastic jointingfelt
86 154040 required
and costand of degree
spun and yarn with and 180.33 1 30.00 5409.90 45.00 60 60.00 60.00
washer
access doorbolts inclusivenuts, of
sand
complete, etc., complete
including jointing Each
87 3mm
154060 Providing thick bitumastic felt 216.34 1 10.00 2163.40 15.00 0 0.00 0.00
and costand
washer ofand spunfixing
bolts yarnnuts,
and 110
and
mm
sand PVC
etc., Plain
complete bend of the Each
complete, including jointing
88 required
154070 and
Providing the cost anddegree fixing
of fixing
spun yarn with
110 105.82 1 10.00 1058.20 10.00 0 0.00 0.00
Providing
accessPVC door and inclusive 110
of
mm
and etc.,bend of the
mm sand PVC thickoffset
complete
including feltj
Each
89 154080 3mm
required
etc., - (b)
bitumastic
degree
With 15 with
cm 150.14 1 10.00 1501.40 10.00 0 0.00 0.00
washer, door
access bolts inclusive and nuts, of
projection
complete, Each
90 154092 3mm thickincluding
bitumastic jointingfelt 82.15 1 20.00 1643.00 25.00 16 16.00 16.00
and
washer, cost of bolts spunand yarnnuts, and
sand etc. complete
complete, including jointing Each
Providing and fixing 110
91 154100 and cost of spun yarn and 97.29 1 20.00 1945.80 45.00 32 32.00 40.00
mm PVC collar (loose
sand etc. including
Providing
socket) complete
and fixingfixing jointing
75mm Each
92 Providing
Providing
154110 Providing and
and fixing 7575mm mm 134.46 1 30.00 4033.80 40.00 28 28.00 40.00
xand 75 cost
mm of xand 75mm
spunfixing dia
yarn75PVC and
mm
xPVC
branch
sand
soil,
75 etc. waste
mmcomplete x 75 mm
(single
and vent
PVC
equal Each
xplain
75 mm
pipes
Supplying x and
including
branch 75 mm x granite
jointing
fixing and
93 154130 75 junction)
mm PVC of (single
the
plain
equal
required
branch 76.66 1 10.00 766.60 10.00 0 0.00 0.00
cost
stone of
junction)of spun
superior yarn qualityand sand
black
degree
(double with the access required
door
20
degree to equal
etc., complete
inclusive 25mm
including
of degree
junction)
3mm thick
jointing
of
thickin metre
94 the required
154140 masonry or concrete with
as a 140.19 1 125.00 17523.75 125.00 103.73 103.73 105.00
and the cost
bitumastic of spun
felt washeryarn
access
Purdah door
and sandtoetc., inclusive
urinal range
complete of etc. Each
including
3mm to thick jointing and
bitumasticcutfelt cost
95 stone
154160 Providing
of spun and be and
yarnbolts machine
fixing
and sand 8 cm&
etc., 76.66 1 10.00 766.60 10.00 2 2.00 2.00
washer
well polished and facesnuts,
PVC
complete
complete,bendincludingof on the all required
jointing Each
96 and thewith
154170 degree edgesaccessto door be 85.02 1 25.00 2125.50 25.00 13 13.00 13.00
and cost ofbyspun
moulded yarn and
semi-circular
inclusive
sand etc., and of
complete 3mm thick Each
Providing
rounding
bitumastic felt fixing
andwasher, 75bolts
polishing. mm
97 154190 NOTEdia PVCnuts, : offsetTheetc., - With
following 130.39 1 10.00 1303.90 10.00 0 0.00 0.00
and complete,
15 cm projection
percentage is to beand added Each
including
Providing and jointing fixing 75 costmm/
98 154203 deducted
of spun incase
yarn andofsand granites etc. 54.28 1 10.00 542.80 10.00 3 3.00 0.00
PVC collar (loose socket)
other
complete than superior quality Each
including jointing and cost
99 154220 black.
of spuni) For yarn superior
andfixing sand quality
etc. 74.06 1 20.00 1481.20 20.00 27 27.00 30.00
Supplying
Red and
like “RBI” red add 15% pipe
complete
as outlet or waste Each
100 154240 extra ii) For pink pipe coloured etc.,
47.34 1 10.00 473.40 10.00 0 0.00 0.00
- PVC 50
granite mm bore
deduct 25%1.7 iii) mm
For
thick
gray coloured granite metre
101 155063 deduct 102.10 1 100.00 10210.00 100.00 3.7 3.70 5.00
18%
Providing and fixing Sqm
102 155070 Chromium plated brass 2016.97 1 10.00 20169.70 10.00 5.655 5.66 6.00
Providing and fixing Towel
waste
ring (C.P.)p etc., - of 32 mm approved Each
103 Supplying
155141 make 170 mm dia having fitting and fixing 64.75 1 50.00 3237.50 50.00 0 0.00 0.00
Providing
soap and fixing
approx.
Connector weighttray 490 gm with
(C.P.)
of Each
104 155170 size150x150mm
coupling
vitreous 208.19 1 40.00 8327.60 40.00 0 0.00 40.00
(concealed type) with all
15 mm
necessary x 450 mm
fittings long etc. Each
Demolishing plain cement
105 155180 completed as directed by 175.57 1 15.00 2633.55 30.00 0 0.00 0.00
concrete including dispos
the Engineer-incharge
etc., - 1:2:4 or richer mix Each
106 155230 with max. 20 mm coarse 176.63 1 40.00 7065.20 40.00 0 0.00 0.00
Extra
aggregate over Item Nos. cum
107 181021 181021 and 181050 if 510.54 1 112.20 57282.59 98.00 14.20 3.54 3.54 10.00
pavement breaker is used
on orders of Engineer
Demolishing brick work cum
108 181040 including stacking of serv 223.44 1 30.00 6703.20 30.00 3.54 3.54 30.00
Extra
Dismantlingfor removing tile work mortar in
Dismantling
etc.,
from - In cement
bricks doors,
andmortar windows
cleaning cum
floors/dado/skirting laid in
109 182013 and etc., -
clerestory windows
From brick work in 431.31 1 31.00 13370.61 31.00 9.301 9.30 31.00
cement ormortar/
(steel wood) chemical shutter
cement mortar
mortar/synthetic chowkhats, adhesive Nos.
including
110 182023 including stacking material 1413.93 1000 3.35 4.74 3.35 0 0.00 0.00
architrave,
Taking holdfasts
out existing
doors, in CC
windows,
Taking
within out
50m lead plywood Sqm
or masonry
clerestory etc. completewindow,if
111 183020 and (including
stacking laminations
within 50m 24.32 1 1432.00 34826.24 1432.00 813.578 813.58 900.00
cupboard
any) of any shutters
thickness only
from
lead or wood) including
(steel Each
door, windows partitions,
112 185010 stacking within 106.53 1 109.00 11611.77 150.00 151 151.00 160.00
boards, furniture etc
50m lead fittings as beading
including Each
113 185020 Taking
and
out existing broken
bordersfrom including 40.51 1 18.00 729.18 18.00 0 0.00 18.00
glass panes existing
stacking.
door, windows, Sqm
Dismantling steel partitions
work in
114 185070 etc. 20.98 1 30.00 629.40 30.00 18.83 18.83 30.00
single section including etc., -
stacking/disposal
Channels, angles, tees and sqm
115 185080 flats/ rounds or any other 53.22 1 65.00 3459.30 65.00 0 0.00 0.00
rolled shape.G.I. /PVC pipes
Dismantling Kg
116 186012 (external work) etc., - Upto 0.51 1 1100.00 561.00 1100.00 385.5 385.50 1100.00
40mm dia G.I. /PVC pipes
Dismantling metre
117 188021 (external work) etc., - 33.02 1 150.00 4953.00 150.00 143.36 143.36 150.00
Above 40mm dia metre
118 188022 37.18 1 100.00 3718.00 100.00 32 32.00 100.00
As per Agreement
SSR/NS
SI. No Description of work Rate Unit
Item.No Dismantling rain water pipe
Qty Amt SW-1 SW-2 CC-III cc 4 total Qty proposed qty
of G.I, C.I, M.S, SCI, etc., -
Dismantling
Dia of 80mmrain of below
and flushing
gypsum metre
Dismantling
cistern of any sizewater pipe
including
119 188031 partitions
of G.I, C.I, ofM.S, serviceable
SCI, etc., - 15.84 1 50.00 792.00 50.00 34 34.00 50.00
stacking
framework
Dia of above 80mm
materials and disposal
(Aluminium/steel),and false
of metre
120 188032 ceiling
unserviceable materials
including stacking of 16.36 1 200.00 3272.00 300.00 247 247.00 247.00
within 50m lead
serviceable material and Each
121 188040 disposal of unserviceable 202.29 1 25.00 5057.25 30.00 29 29.00 29.00
material
Dismantlingwithinof50moldleadS.W. sqm
122 189040 Taking out Wash
pipes including
hand 13.92 1 278.00 3869.76 278.00 108.014 108.01 150.00
basin and sinkbreaking
complete o
etc., - 150mm
with all ofparts diameter
including metre
123 Supply Polyethylene
189082 making good the walls 39.93 1 50.00 1996.50 50.00 0 0.00 0.00
Vinyl Chloride water
complete,
storage tank if required
with cover and Each
124 189120 suitable locking 158.64 1 25.00 3966.00 25.00 25 25.00 25.00
arrangement litre
125 257050 Supply of Miscellaneous 5.75 1 72000.00 414000.00 72000.00 0 0.00 72000.00
UPVC fittings Kg
126 257370 287.50 1 20.00 5750.00 30.00 0 0.00 25.00
SCHEDULE 'A' TOTAL 4634817.87 0.00
0.00
(+) 24 % ON SSR A 24% 1112356.29 0.00
TOTAL OF SCHEDULE 'A' 5747174.16 0.00
0.00
Schedule 'B' Reinforcment
Supplying for RCC
Reinforcement
for R.C.C. work -Cold 0.00
twisted bars Kg
1 045013 50.76 1 9058.00 459784.08 2521.00 6537.00 127.677 2677.488 2805.17
Schedule C (Cement )
Supply and using cement at 0.00
worksite :OPC 53 grade Tonne
1 033062 4600.00 1 80.54 370488.60 90.30 27.958 19.474 47.43
0.00
NS Items SCHEDULE E 0.00
Finishing Walls with Acrylic
1 118010 smooth exerior paint with 46.01 1 sqm 300.00 13803.00 300.00 359.578 359.58
silicon additive on
decorated wall surface of
As per Agreement
SSR/NS
SI. No Description of work Rate Unit
Item.No
Qty Amt SW-1 SW-2 CC-III cc 4 total Qty proposed qty
7919092.47
SOUTH CENTRAL RAILWAY FIRST VARIATION SECUNDERABAD DIVISION
Name of work: SW-1 Sanchalan Bhavan : proposed Repair to Test room at Ground Floor ,Staff area of Sr.DME office ,Sr DFM office and Tollet blocks of Cellar ,first, second, Third & fourth floor on Canteen side . SW-2 ;- Hyderabad : proposed Repairs to water supply arrangements osn SP-2 side quarters .
Accp. Lr.no : CW/WV/WV/25/Co/SC/15/OT date ; 25.06.2015 Agency : N. Bhasker Rao h-no 5-4-7/2 Ramaiahnagar Kukatpally HYD -72.
1 011011 Earth work in excavation as 100.28 1 cum 204.00 20457.12 204.00 20457.12 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
per approved drawings and
2 021070 dumping
Loading/Unloading at embankment ballast, 46.62 1 Cum 806.80 37613.02 1000.00 46620.00 193.200 9006.98 0.000 0.00 0.000 0.00 0.00 0.000 0.00 193.200 9006.98
site or spoil heap, stone- within 0.00
kankar, brickbats,
railway land,
chips, shingle, including stone 50m
3 021090 Leading ballast, kankar, 59.54 1 Cum 405.90 24167.29 500.00 29770.00 94.100 5602.71 0.000 0.00 0.000 0.00 0.00 0.000 0.00 94.100 5602.71
lead and
boulders, block 1.5m lift, etc.,
kankar, - All 0.00
brickbats,
kinds of soils stone-chips,
pitching
shingle, stones boulders,
stone , rubble
4 031023 Providing and laying 2309.45 1 cum 99.00 228635.55 110.00 254039.50 11.000 25403.95 0.000 0.00 0.000 0.00 0.00 0.000 0.00 11.000 25403.95
stones,
block kankar, laterite, coal, surkhi,
pitching 0.00
cement
dry mortar, concrete,
sand up to
stones,
plinth in every rubble, moorum,
retaining stones,
walls,
5 033010 Extra for
earth, manure subsequent
or sludge, 163.95 1 cum 48.00 7869.60 48.00 0.00 48.00 7869.60 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
laterite,
etc.,height- 1:2:4 coal, (1 surkhi,
cement :dry 2 0.00
3m
ashes,
mortar, lime ( or
sand, etc.,part there
including
moorum, of
sand
)Providing
above : floor
4 gradedtwo level stone
from
6 041011 lead up
earth, manure to
and or 50m
layingsludge, andin 2326.70 1 cum 29.70 69102.99 29.70 29.70 69102.99 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
aggregate
plinth
stackinglevel 20mm
into/from for nominal
concrete
trucks, 0.00
position
ashes,
size) lime,M 20
debris, Grade
muck,
work
trailors in superstructure
7 041012 malba, or
concrete
Providing etc. wagons
for
for lead
and reinforced
layingupto in 25 2530.27 1 cum 13.90 35170.75 13.90 13.90 35170.75 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
concrete etc., 0.00
km.
position Note :MLead 20 -under AllGrade
work
this
upto
item
concrete forplinth
is payable level, including
when
reinforced the
8 042012 Centering and shuttering 227.70 1 Sqm 197.20 44902.44 197.20 197.20 44902.44 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
raft
same foundation
concrete exceeds etc., of-All
500m. washable
work in 0.00
etc.,
aprons,forHS -tank, Walls (any
pile level
cap,
buildings
thickness)above plinth
including
9 042013 Centering
footings
upto floor two ofandlevel. FOB, shuttering and 230.70 1 Sqm 91.30 21062.91 91.30 91.30 21062.91 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
attached plasters, 0.00
etc., for -
Platform shelter etc.Suspended floors,
buttresses,
roofs, landings, plinthbalconies,
and string
10 043012 Providing, 3788.40 1 cum 0.25 947.10 0.25 0.25 947.10 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
courses etc. hoisting and
FOB 0.00
fixing in position upto floor
slabs, walkway
two level hoisting slabs
M20 Grade and
11 043014 Providing, and 3770.47 1 cum 6.00 22622.82 6.00 6.00 22622.82 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
access platform
precast 0.00
fixing in RCC position workupto etc.,floor- In
small
two level lintels M20upto 1.50m
Grade
12 051018 Brick work with non- 2277.09 1 cum 3.50 7969.82 3.50 3.50 7969.82 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
clear span
precast RCC work etc., -ofIn 0.00
modular (FPS) bricks
Shelves,
class etc., cantilevers,
13 051040 Extra over - item Cement 051010 mortar & 166.76 1 cum 3.00 500.28 3.00 3.00 500.28 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
chajjas,
1:6 (1 cementsunshades : 6worketc.
coarse 0.00
051020 for brick in
sand)
superstructure beyond
14 051050 Extra for brick work in 327.89 1 cum 6.00 1967.34 6.00 6.00 1967.34 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
plinth level upto floor two 0.00
superstructure beyond
level : floor level for every
second
15 051181 Half brick masonry with 272.84 1 Sqm 170.00 46382.80 170.00 170.00 46382.80 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
3m or part thereof : 0.00
bricks of class designatio
16 057103 etc., or
Add - Cement
deduct mortar from rates 1:3 (1 of -538.85 1 cum 20.00 -10777.00 20.00 20.00 -10777.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
cement : 3 when
coarsethe sand) 0.00
brickwork b etc.,
17 057104 -
Add Deduct
or deduct from for rates Class of -655.33 1 cum 10.50 -6880.97 10.50 10.50 -6880.97 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
designation 5 0.00
brickwork when the b etc.,
18 071011 -
ProvidingDeductwood for work Class in 69.49 1 cudm 1100.00 76439.00 1100.00 1100.00 76439.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
designation 3.5 windows, c 0.00
frames of doors,
19 072152 etc., - Second
Providing and fixing flush class teak 1038.69 1 Sqm 20.00 20773.80 20.00 20.00 20773.80 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
woodshutters to IS: 0.00
door
20 072160 22
Extraetc., for - providing 30mm thick and 351.93 1 Sqm 12.00 4223.16 12.00 12.00 4223.16 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
including ISI with marked 0.00
fixing flush doors teak
stainless steel
veneering on butt side
one hinges in
21 073030 Providing and fixing 25mm 2576.73 1 Sqm 74.00 190678.02 74.00 74.00 190678.02 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
with necessary
item No.072150 screws 0.00
thick cup board shutters ,
22 074351 with
Providing prelaminated and flat
fixing 226.49 1 Sqm 40.00 9059.60 40.00 40.00 9059.60 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
pressed 3laminated layer particle 0.00
decorative plastic
board
etc., - 1conforming
mm thick to IS
23 077072 Providing and 88.23 1 Each 30.00 2646.90 30.00 30.00 2646.90 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
12823 -Grade I,fixing
havingbright one 0.00
finished brass handles etc.,
side decorative lamination
24 077121 -of 100mm
Providing
approved and fixing shadespecial and 98.01 1 Each 30.00 2940.30 30.00 30.00 2940.30 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
quality
other sidebright balancing finish
25 077191 cupboard
lamination and
Providing orincludingward
fixing robe IS: 1116.39 1 Each 14.00 15629.46 14.00 14.00 15629.46 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
locks
second etc., - 40mm
class teak wood 0.00
3564 marked aluminium
26 077600 lippingclosureext
Door
Providing and etc., fixing- 27.08 1 Each 14.00 379.12 14.00 14.00 379.12 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
25x12mm make
Hardwyn thick (Eddy)with or 0.00
magnetic catcher ISI
necessary
equivalent
marked with screws necessary and
27 078012 Providing
nickel and fixing ISI 84.25 1 Each 150.00 12637.50 150.00 150.00 12637.50 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
screwsplated
marked etc. bright
complete
aluminium
finished
butt hin
0.00
MS piano hinges complete
28 078021 etc., - 125x63x4mm
Providing and fixing 95.91 1 Each 43.00 4124.13 43.00 43.00 4124.13 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
aluminium sliding door bolts
29 078033 etc., - 300x16mm
Providing and fixing 39.26 1 Each 43.00 1688.18 43.00 43.00 1688.18 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
aluminium tower bolts ISI
30 078061 mar etc., - 200x10mm
Providing and fixing 17.85 1 Each 104.00 1856.40 104.00 104.00 1856.40 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
aluminium handles I etc., -
31 078072 125mm
Providing and fixing 59.61 1 Each 25.00 1490.25 25.00 25.00 1490.25 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
aluminium hanging floor
32 078310 door etc.,and
Providing - fixing
Twin of rubber
fibre 510.24 1 RM 230.00 117355.20 230.00 230.00 117355.20 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
stopper 0.00
glass reinforced plastic
33 078320 (FRP) door
Providing and framesfixingof30three mm 2258.43 1 Sqm 85.00 191966.55 85.00 85.00 191966.55 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
legged of cross- 0.00
thick glass fibre section
reinforced 90
mm x 45
(FRP) mm having
panelled door shutter single
34 082011 Providing
rebate of and fixing 345.16 1 Kg 871.00 300634.36 900.00 900.00 310644.00 29.000 10009.64 0.000 0.00 0.000 0.00 0.00 0.000 0.00 29.000 10009.64
of required colour and 0.00
anodised
32 mm x 15 aluminium
mm to receive work
approved
etc., - For fixed brand
portion fixing and
35 082012 Providing
shutter of 30 mmand 353.19 1 Kg 215.00 75935.85 400.00 400.00 141276.00 53.750 18983.96 32.250 11390.38 21.500 77.50 27372.23 0.000 0.00 185.000 65340.15
manufacture, made with fire 7593.59
anodised
thickness. aluminium
retardant The laminate work
grade
36 082022 etc.,
door -
Providing and
unsaturated For
frame openable/sliding
moulded
fixing 12mm
polyester with
resin, 1017.77 1 Sqm 47.00 47835.19 50.00 50.00 50888.50 3.000 3053.31 0.000 0.00 0.000 0.00 0.00 0.000 0.00 3.000 3053.31
portions and 0.00
fire prelaminated
thick
moulded to 3 fixing
retardant mm thick hinges
thre etc.,/
grade
FRP
37 082032 -pivots,
unsaturated
Prelaminated
laminate
Providing
PVC/
andpolyester
for farming neoprene
fixing particle resin
hollow
glazing 768.14 1 Sqm 117.00 89872.38 150.00 150.00 115221.00 29.250 22468.10 3.750 2880.53 0.000 0.00 0.00 0.000 0.00 33.000 25348.62
gasket
and
board
rails required
chopped
and with dstyles, and
mat. making
decorative Door
with 0.00
in aluminium
provision forboth etc.,
fixing - With
frame laminate
lamination
wooden
float/frosted on
frame glass andshall
sides be of
suitable
panes 2
of
38 082041 Providing
fittings. and fixing double 1837.16 1 Each 4.00 7348.64 4.00 4.00 7348.64 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
mm
blocks
5.5mm
action
thick of(Fittings
andseasoned
thickness
hydraulic
shall shall
be
etc., -wood
filled
With
be 0.00
paid
with for
inside atnot separately)
suitable required wooden places block for
(weight
Stainless Steellesscover than 13.75
plate
39 082080 Aluminium
in all the
fixing of three Composite
fittings,legs. cast The 1728.47 1 Sqm 48.00 82966.56 48.00 48.00 82966.56 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
kg/sqm) 0.00
Cladding
frame shall- be
monolithically Providing
covered
with 5 with and
mm
40 095013 fixing
fibre
thick glass
Providing FRP and fromlaminate all sides.
fixing Ist
for 671.29 1 Sqm 700.00 469903.00 700.00 700.00 469903.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
Aluminium
M.S. stay
quality
panels and shall
ceramic be Composite
conforming provided
etc., to-
Panels
at the
300x450
(IS:14856 bottom
mm having
and to ready
above total
the
thickness
frame complete work
2000) of
4mm (with 0.5mm thick
Excess Excess 40% to Excess Remarks
As per Agreement As per requirement Up to 25% Total savings Total Excess
SSR/NS 25% to 40% 50% 50% and above
SI. No Description of work Rate Unit
Item.No
Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt
41 095023 Providing and fixing 656.15 1 Sqm 275.00 180441.25 300.00 300.00 196845.00 25.000 16403.75 0.000 0.00 0.000 0.00 0.00 0.000 0.00 25.000 16403.75
0.00
ceramic tiles conforming
42 095026 etc., - Of
Providing Group and B-I-b of IS :
fixing 775.21 1 Sqm 792.00 613966.32 1050.00 1050.00 813970.50 198.000 153491.58 60.000 46512.60 0.000 0.00 0.00 0.000 0.00 258.000 200004.18
15622 0.00
ceramic (Ceramic Tiles) of
tiles conforming
size - Of Group B-I-a of IS :
etc.,
43 095030 Extra over to
200x200mm items 095025 40.15 1 Sqm 100.00 4015.00 800.00 800.00 32120.00 25.000 1003.75 15.000 602.25 10.000 650.00 26097.50 0.000 0.00 700.000 28105.00
and (Vitrified 400x400mm
15622095026, iftiles) of size
adhesive
401.50
above 400x400mm upto
(recommended by
44 099034 Providingmm and fixing 18mm 2499.87 1 Sqm 15.00 37498.05 15.00 100.00 249987.00 3.750 9374.51 2.250 5624.71 1.500 77.50 193739.93 0.000 0.00 85.000 212488.95
600x600
manufacturer of tiles) 3749.81
thick mirror polis etc., of-
specifiedBlack.
Granite thickness
Area isof used
slab
45 099062 Extra for providing edge 119.14 1 metre 50.00 5957.00 550.00 550.00 65527.00 12.500 1489.25 7.500 893.55 5.000 475.00 56591.50 0.000 0.00 500.000 59570.00
instead
over 0.5ofSqmcement
but uptomortar1.0 595.70
moulding to 16mm to 20mm
Sqm - Granite work
etc.,
46 099072 Extra for cutting groove 166.33 1 Sqm 40.00 6653.20 100.00 40.00 6653.20 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
upto 5mm wide and 6mm 0.00
de etc., - In Granite work
47 099083 Polished stone tile work for 1323.66 1 Sqm 75.00 99274.50 500.00 500.00 661830.00 18.750 24818.63 11.250 14891.18 7.500 387.50 512918.25 0.000 0.00 425.000 562555.50
9927.45
wall lining (dado) o etc., -
48 099102 8mm for
Extra thickprovidingsuperioropening quality 423.59 1 Each 30.00 12707.70 30.00 30.00 12707.70 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
(RUBY Red)size granite 0.00
of required and stiles etc., - Openin
49 106090 Opening ofand
Providing areafixing aboveTiled 100 398.46 g
1 Sqm 120.00 47815.20 120.00 120.00 47815.20 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
sq cm 0.00
False Ceiling Tiles of
50 106220 approved materials
Dismantling and removing of size 61.55 1 Sqm 16.00 984.80 120.00 120.00 7386.00 4.000 246.20 2.400 147.72 1.600 96.00 5908.80 0.000 0.00 104.000 6401.20
595x595mm in true 98.48
Particle Board, Asbestos or
horizontal
similar level ceiling
suspended
51 111022 15 mm sheets
on interlocking cementmetal plaster and
grid on of
77.03 1 Sqm 129.00 9936.87 129.00 129.00 9936.87 0.000 0.00 0.000 0.00 0.000
0.00
0.00 0.00 0.000 0.00 0.000 0.00
stacking
the rough side upto 50 metres
of single or
galvanized
part steel
thereof1:6 (1cement: 6 sections
52 111051 o
15 etc.,
mm -cement
(galvanized @ plaster on 79.48 1 Sqm 650.00 51662.00 1000.00 1000.00 79480.00 162.500 12915.50 97.500 7749.30 65.000
5166.20
25.00 1987.00 0.000 0.00 350.000 27818.00
fine sand)
the rough side consisting of single of
170gsm/sqm)
53 115060 o
main
Applyingetc.,“T” - runners 1:4 (1cement:
one suitably
coat of 21.75 1 Sqm 1970.00 42847.50 3800.00 3800.00 82650.00 492.500 10711.88 295.500 6427.13 197.000 845.00 18378.75 0.000 0.00 1830.000 39802.50
4coarse
spaced primer
cement sand)
at joints of approved to get 4284.75
required
brand and length and of size
manufacture on
54 115090 24x38mm
wall painting made
Wall surface on new work from 53.05 1 Sqm 1970.00 104508.50 1970.00 3000.00 159150.00 492.500 26127.13 295.500 15676.28 197.000 45.00 2387.25 0.000 0.00 1030.000 54641.50
0.30mm 10450.85
with two orthick more coats (minimum)
sheet
of plastic spaced emulsion at 1200mm paint of
55 115091 Wall
centre painting
to centre on and new cross work 10.39 1 Sqm 1970.00 20468.30 1970.00 3000.00 31170.00 492.500 5117.08 295.500 3070.25 197.000 45.00 467.55 0.000 0.00 1030.000 10701.70
approved brand and 2046.83
with
“T” oftwo sizeor more24x25mm coatsmade
manufacture
o etc., - Extra over Itemsto give an
for
56 117081 of
Oil
evenbound shade distemper after 56.16 1 Sqm 105.00 5896.80 500.00 500.00 28080.00 26.250 1474.20 15.750 884.52 10.500 342.50 19234.80 0.000 0.00 395.000 22183.20
roller 589.68
0.3mm painting
removing thick old (min.) in lieu
white etc.,
sheet, of-
normal
1200mm
Two or more coat,
longspacedto give
57 121061 Painting
brush painting with synthetic
if specifically 70.42 1 Sqm 4.00 281.68 100.00 100.00 7042.00 1.000 70.42 0.600 42.25 0.400 94.00 6619.48 0.000 0.00 96.000 6760.32
between 28.17
enamel paint of approved at
an
ordered
even shade main “T” b
600mm
etc., - Two centre or more to centrecoats to
on
58 121211 Powder
form awork coating/50
grid of 1200x600mm microns 34.32 1 Sqm 145.00 4976.40 300.00 300.00 10296.00 36.250 1244.10 21.750 746.46 14.500 82.50 2831.40 0.000 0.00 155.000 5319.60
new over an allunder 497.64
by
and spray
secondarymethod for
cross “T”etc.,
of
coat
-length of suitable
Surfaces over shade 10microns with
cm.size in
59 121212 Powder coating/50 10.47 1 metre 1200.00 12564.00 1200.00 1200.00 12564.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
ordinary 600mm
width/girth paint of and approved 0.00
by
24x25mm
brand sprayandmethod made
manufacture for0.30mm
of all etc.,
60 132141 -thick
Surfaces
Providing minimum upto
and 10 cm.
sheet to
fixing in
be 49.04 1 Each 60.00 2942.40 100.00 100.00 4904.00 15.000 735.60 9.000 441.36 6.000 10.00 490.40 0.000 0.00 40.000 1961.60
width/girth
interlocked atandmiddlenot thein
of PVC 294.24
unplasticised
conjunction
1200x600mm45with
connection panel cm to similar
form
length
61 132190 Providing and fixing C.P. 365.47 1 Each 18.00 6578.46 18.00 18.00 6578.46 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
painted
grids-of
etc., surfaces 0.00
brass 15 long mmnose nominal bib borecock,
600x600mm wall angle of
62 132200 15 mm nominal
Providing and 3mm fixingbore,C.P. of 369.36 1 Each 70.00 25855.20 70.00 70.00 25855.20 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
size 21x21x and 0.00
approved
brass quality
laying long false body ceilingbibtiles cock, of
conforming
15 mm nominalto IS standardsbore, of
63 134011 approved texture
Providing and fixing in the PTMT grid 141.77 1 Each 142.00 20131.34 142.00 142.00 20131.34 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
and
approvedweighing not less than
quality 0.00
including,
bib cock of appro wherever
etc., -
810 gms
conforming tocutting/making
IS standards
64 136160 required,
15mm
Cutting nominal holes bore, 86mm
up than to 94.88 1 Each 50.00 4744.00 70.00 70.00 6641.60 12.500 1186.00 7.500 711.60 0.000 0.00 0.00 0.000 0.00 20.000 1897.60
and
openings
long. weighing
Weighingforwallsnot
services less
not like
less 0.00
30x30cm
690 gms in including
diffusers,
than
making 88 good
gms grills, thelightsame fittings,
65 136170 Cutting
fixtures, smoke holes up : to
detectors 107.20 1 Each 75.00 8040.00 75.00 75.00 8040.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
15x15cm
etc. in RCC floors and
66 136180 roofs
Making chases up pipe
for passing drain to 44.71 1 metre 100.00 4471.00 100.00 100.00 4471.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
etc. and repairing the hole 0.00
7.5x7.5cm in walls including
after insertion
making good of drain
and pipe
67 136190 Making
etc. with hole
cement up tofinishing
concrete 20x20 53.02 1 Each 70.00 3711.40 70.00 70.00 3711.40 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
with and matching surface pipes after 0.00
cm embedding
1:2:4 (1 G.I.
housing cement pipediameter:2 coarse
etc.
68 138043 up to 150mm
Hoisting,
sand: 4fitting and fixing
graded stone in
in 1192.40 1 Each 16.00 19078.40 16.00 16.00 19078.40 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
masonry plastic and filling with- 0.00
position
aggregate 20mmm nominal etc.,
cement
1000 concretetank
size) ltr including
capacity 1:3:6
finishing (1
69 138044 Hoisting, fitting and fixing in 1479.77 1 Each 28.00 41433.56 28.00 28.00 41433.56 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
cement :3 coarse sand 6 0.00
complete plastic
position so as to make etc., it-
graded stone m aggregate
70 141012 leak proof
2000
Providing,ltr capacity laying tank size) and 205.15 1 metre 50.00 10257.50 50.00 50.00 10257.50 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
20mm nominal 0.00
jointing
including disposal of malbapi
glazed stoneware
71 141051 etc., - 150mm
Providing and diameter
fixing square- 1087.30 1 Each 5.00 5436.50 5.00 5.00 5436.50 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
mouth S.W. gully trap etc., -
72 151011 100x100mm
Providing andsize fixingP water type 2854.42 1 Each 10.00 28544.20 10.00 10.00 28544.20 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
With F.P.S. bricksetc., class- 0.00
closet squatting
designation
White 75
Vitreous
73 151021 Providing and fixing China white 2660.44 1 Each 15.00 39906.60 20.00 20.00 53208.80 3.750 9976.65 1.250 3325.55 0.000 0.00 0.00 0.000 0.00 5.000 13302.20
Orissa 0.00
vitreouspattern chinaW.C.pedestal pan of
size - 580x440-mm
etc., W.C. with
74 151100 Supplying andpan fixing withwhite ISI 1339.28 1 Each 25.00 33482.00 25.00 25.00 33482.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
integral type
marked white foot restsplastic
solid 0.00
vitreous china circular wash
seat and
basin lid
category No. white, 1004
75 151260 Providing and fixing 818.79 1 Each 15.00 12281.85 15.00 15.00 12281.85 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
group 0.00
vitreousI, china size 470 flat mm. back dia or
with corner
wall CP brass type pillar
lipped tap, front32
76 152110 Providing and fixing 711.82 1 Each 15.00 10677.30 15.00 15.00 10677.30 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
mm. rubber
urinal basin of plug and CP 0.00
600x450mm
brass chain, bevelled
32 mm. edge CP
430x260x350mm
mirror and
77 152124 brass , waste
Providing
340x410x265mm
5.5and mm of thick
fixing ofmirror
standard float
sizes 1330.26 1 Each 10.00 13302.60 10.00 10.00 13302.60 0.000 0.00 0.000 0.00 0.000
0.00
0.00 0.00 0.000 0.00 0.000 0.00
glass
of 5.5 (of
pattern mm approved
thicknesswith
connected quality)
o etc., GI
respectively
complete
78 153440 -waste
Providing pipewith
Rectangular and
6mm
uptofixing floorshape thick
level
C P 456.75 1 Each 35.00 15986.25 35.00 35.00 15986.25 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
hard board ground fixed
1500x450 to 0.00
and 32Bottle
brass
wooden
mm. dia
cleats trapwith CP 31(outer
brass
mm,
C.P.
dimension)
trap
single andpiece unionsmoulded complete
of ht.
79 153471 Providing
brass screws andand fixing washersC P 109.85 1 Each 50.00 5492.50 50.00 50.00 5492.50 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
including cutting 0.00
270 mm,
brass
complete effective
grating witlength etc.,and of-
making
tall
Grating pipegood
100 from the centrewalls etc. of
80 153500 Providing
as a complete and mm fixingnominal
job Swan 438.55 1 Each 30.00 13156.50 30.00 30.00 13156.50 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
waste
dia. pillarcoupling
and tap 12 (C.P. mm. Brass) high 0.00
neck
260 mm,shape 77 mm breadth
domed
15 mm dia. with havingswinging wt.
81 153531 Providing and 132.22 1 Each 50.00 6611.00 50.00 50.00 6611.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
water
not
spout lesssealthan
having
of minimum
25 gms fixing
approx. wt. 0.00
Basin/sink
25 mm, weighing waste (C.P.
approx.
1000 gms
Brass) etc., - a) Waste 32
82 153560 260 gms and fixing Coat
Providing 58.12 1 Each 25.00 1453.00 30.00 30.00 1743.60 5.000 290.60 0.000 0.00 0.000 0.00 0.00 0.000 0.00 5.000 290.60
mm "J" type two way 0.00
hook
83 153570 (C.P.Brass)
Providing and fixing Soap 181.24 1 Each 35.00 6343.40 35.00 35.00 6343.40 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
dish (C.P. Brass) having
approx. wt. 220 gm
Excess Excess 40% to Excess Remarks
As per Agreement As per requirement Up to 25% Total savings Total Excess
SSR/NS 25% to 40% 50% 50% and above
SI. No Description of work Rate Unit
Item.No
Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt
84 154010 Providing and fixing 110mm 263.03 1 metre 300.00 78909.00 340.00 340.00 89430.20 40.000 10521.20 0.000 0.00 0.000 0.00 0.00 0.000 0.00 40.000 10521.20
0.00
dia PVC soil, waste and
85 154030 vent
Providing pipes including
and fixing jointing
110 166.94 1 Each 15.00 2504.10 15.00 15.00 2504.10 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
and 0.00
mm xcost 110of mm spun x 110mm yarn and dia
sand etc.
PVC complete
86 154040 Providing and fixing(single
plain branch 110 180.33 1 Each 30.00 5409.90 45.00 45.00 8114.85 7.500 1352.48 4.500 811.49 3.000 540.99 0.00 0.00 0.000 0.00 15.000 2704.95
equalx 110junction)of
mm mm x 110mm the dia
required
PVC plaindegree branch including
87 154060 Providing and fixing(single 110 216.34 1 Each 10.00 2163.40 15.00 15.00 3245.10 2.500 540.85 1.500 324.51 1.000 0.00 0.00 0.000 0.00 5.000 1081.70
jointing
equalx 110 and cost of spun
junction)of 216.34
mm mm x 110mm the dia
yarn
required and degree sand etc.,
with
88 154070 PVC
Providing plain and branch fixing (double 110 105.82 1 Each 10.00 1058.20 10.00 10.00 1058.20 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
complete
access door inclusive of 0.00
equalx 110
mm junction)
mm x 5mm of PVC the
3mm thick degree
required bitumastic with felt
89 154080 plain
Providing branch
and fixing (single
110 150.14 1 Each 10.00 1501.40 10.00 10.00 1501.40 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
washer and
access door bolts and nuts,
inclusive of 0.00
unequal
mm 110junction) of xthe
3mmx thick
complete,
required
mm
including x 5mm
bitumastic
degree
jointing 5
felt
with
90 154092 mm
and the
Providing
washer PVC cost
and branch
and
bolts anddouble
of fixing
spun yarn
110
nuts, 82.15 1 Each 20.00 1643.00 25.00 25.00 2053.75 5.000 410.75 0.000 0.00 0.000 0.00 0.00 0.000 0.00 5.000 410.75
access
unequal door inclusive
junction)of of
the 0.00
and
mm
complete, sand
PVC etc., offset
including complete
including
jointing j
3mm thick degree
required bitumastic with felt
91 154100 etc.,
and cost
Providing
washer - and (b)
ofand With
spun
bolts and 15 nuts,
yarn
fixing cm
and
110 97.29 1 Each 20.00 1945.80 45.00 45.00 4378.05 5.000 486.45 3.000 291.87 2.000 15.00 1459.35 0.000 0.00 25.000 2432.25
access
projection
sandPVC etc.,doorcomplete inclusive of 194.58
mm
complete, Plain
including bendjointing of the
3mm thick bitumastic felt
92 154110 required
and costand
Providing
washer ofand degree
spunfixing
bolts yarnnuts,
and with
and
110 134.46 1 Each 30.00 4033.80 40.00 40.00 5378.40 7.500 1008.45 2.500 336.15 0.000 0.00 0.00 0.000 0.00 10.000 1344.60
access door inclusive of 0.00
sand etc.,
mm
complete, PVC complete
bend
including of the
jointing
3mm
required
and thick
the cost bitumastic
degree
of fixing
spun yarn felt
with
93 154130 Providing and 110 76.66 1 Each 10.00 766.60 10.00 10.00 766.60 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
washer,
access bolts
door and
inclusive nuts,
of 0.00
and sand
mm PVC etc.,collar complete (loose
complete,
3mm thickincluding
bitumastic jointingfelt
94 154140 socket)
Providing
and cost including
andspun
of fixing yarn jointing
75 and mm 140.19 1 metre 125.00 17523.75 125.00 125.00 17523.75 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
washer,
and cost bolts
of spun andyarn nuts,
and 0.00
PVC soil,
sand etc. complete
complete, waste
including jointingand vent
sand
pipescost etc. complete
including jointing and
95 154160 Providing
and ofand spun fixing yarn 75mm and 76.66 1 Each 10.00 766.60 10.00 10.00 766.60 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
xcost
sand 75of mm
etc.
spunx yarn
complete 75 mm and sand PVC
etc., complete
plain branch
96 154170 Providing and (singlefixing 75mm equal 85.02 1 Each 25.00 2125.50 25.00 25.00 2125.50 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
xjunction)of
75 mm x 75mm the dia requiredPVC
degree
branch including (single jointing
97 154190 Providing and fixing 75equal mm 130.39 1 Each 10.00 1303.90 10.00 10.00 1303.90 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
and the cost of
thespun yarn 0.00
xjunction)
75 mm
and sandwith x of
75 mm
etc., access x required
completedoor
degree
75 mm PVC plain 75 branch
98 154203 Providing and fixing mm 54.28 1 Each 10.00 542.80 10.00 10.00 542.80 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
inclusive equal
(double of 3mm junction) thick
of 0.00
dia PVC offset
bitumastic felt etc., washer
- With
the
15 cm required
projection degree with
99 154220 Providing
including and fixing
jointing and 8 cost
cm 74.06 1 Each 20.00 1481.20 20.00 20.00 1481.20 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
access door inclusive of 0.00
PVC
of
3mm spun bend yarnofbitumastic
thick and thesand required etc.,
felt
100 154240 degree
complete
Providing with
and access
fixing door
75nuts,mm 47.34 1 Each 10.00 473.40 10.00 10.00 473.40 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
washer and bolts and 0.00
inclusive
PVC
complete, of(loose
collarincluding 3mmsocket) thick
jointing
bitumastic jointing
including felt washer, and bolts
cost
101 155063 and cost ofand
Supplying spunfixing yarn pipe and 102.10 1 metre 100.00 10210.00 100.00 100.00 10210.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
and
of
sand spunetc., nuts,
yarn and complete,
sand etc. 0.00
as outlet orcomplete
waste pipe etc.,
including jointing and cost
102 155070 -complete
of spun yarn and sand mm
PVC
Supplying 50 mm
and bore
fixing 1.7granite
etc. 2016.97 1 Sqm 10.00 20169.70 10.00 10.00 20169.70 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
thick 0.00
stone superior quality black
complete
103 155141 20 to 25mm
Providing and thickfixing in 64.75 1 Each 50.00 3237.50 50.00 50.00 3237.50 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
masonry or concrete as a 0.00
Chromium plated brass
Purdahp to
waste etc.,urinal
- 32 range
mm etc.
104 155170 Providing and fixing Towel 208.19 1 Each 40.00 8327.60 40.00 40.00 8327.60 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
stone to be machine cut & 0.00
ring (C.P.) of approved
well polished on all faces
105 155180 make
Providing
and 170 mm
the anddia to
edges having
fixing
be 175.57 1 Each 15.00 2633.55 30.00 30.00 5267.10 3.750 658.39 2.250 395.03 1.500 7.50 1316.78 0.000 0.00 15.000 2633.55
approx. weight(C.P.) 490 gm with 263.36
Connector
moulded by semi-circular
106 155230 coupling
rounding fitting
Supplying and and polishing.fixing 176.63 1 Each 40.00 7065.20 40.00 40.00 7065.20 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
15
NOTEmm x :450The mm long following 0.00
soap tray of
107 181021 percentage
Demolishingis plain
size150x150mm to be vitreous
added
cement/ 510.54 1 cum 112.20 57282.59 98.00 14.20 112.20 57282.59 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
deducted incase
(concealed type)of with granites all 0.00
concrete including dispos
other -than
necessary
etc., superior
fittings quality
etc.
108 181040 Extra i)1:2:4
black.
completed over
For20
orItem
superior
as
richer
directed
mix
Nos.
quality by
223.44 1 cum 30.00 6703.20 30.00 30.00 6703.20 0.000 0.00 0.000 0.00 0.000
0.00
0.00 0.00 0.000 0.00 0.000 0.00
with max.
181021 and red mm181050 coarse
RedEngineer-incharge
the like “RBI”
aggregate add 15%if
109 182013 pavement
Demolishing
extra breaker
ii) For pink is
brickcoloured used
work 431.31 1 cum 31.00 13370.61 31.00 31.00 13370.61 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
on orders of Engineer 0.00
including
granite stacking
deduct 25%ofiii) serv For
110 182023 etc.,
gray - In
Extra cement
forcoloured
removing mortar granite
mortar 1413.93 1000 Nos. 3.35 4.74 3.35 3.35 4.74 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
deductbricks and cleaning 0.00
from
18%
etc., - From tile brick work work in
111 183020 Dismantling in 24.32 1 Sqm 1432.00 34826.24 1432.00 1432.00 34826.24 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
cement mortar 0.00
floors/dado/skirting laid in
112 185010 cement mortar/
Dismantling doors, chemicalwindows 106.53 1 Each 109.00 11611.77 150.00 150.00 15979.50 27.250 2902.94 13.750 1464.79 0.000 0.00 0.00 0.000 0.00 41.000 4367.73
mortar/synthetic 0.00
and clerestory adhesive windows
including
(steel out or stacking
wood) windows, material
shutter
113 185020 Taking doors, 40.51 1 Each 18.00 729.18 18.00 18.00 729.18 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
within 50m lead chowkhats,
including 0.00
clerestory window,
architrave,
cupboard holdfasts
shuttersplywood in only
CC
114 185070 Taking out existing 20.98 1 Sqm 30.00 629.40 30.00 30.00 629.40 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
or masonry
(steel or wood) etc. complete
includingif 0.00
(including
and stacking laminations
within 50m
stacking
any) of out within
any existing
thickness from
115 185080 Taking
lead broken 53.22 1 sqm 65.00 3459.30 65.00 65.00 3459.30 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
50m lead
door, windows 0.00
glass panes frompartitions,
existing
boards,
door, windows, furniture etc
116 186012 Dismantling steel partitions
work in 0.51 1 Kg 1100.00 561.00 1100.00 1100.00 561.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
including fittings asincluding
etc. beading 0.00
single section etc., -
and borders
stacking/disposal including
117 188021 Channels,
stacking. angles,
Dismantling G.I. /PVC teespipes and 33.02 1 metre 150.00 4953.00 150.00 150.00 4953.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
flats/ rounds 0.00
(external work)oretc., any- other Upto
rolled shape.
40mm dia G.I. /PVC pipes
118 188022 Dismantling 37.18 1 metre 100.00 3718.00 100.00 100.00 3718.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
(external work) etc., -
119 188031 Above 40mmrain
Dismantling dia water pipe 15.84 1 metre 50.00 792.00 50.00 50.00 792.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
of G.I, C.I, M.S, SCI, etc., -
120 188032 Dia of 80mmrain
Dismantling and water belowpipe 16.36 1 metre 200.00 3272.00 300.00 300.00 4908.00 50.000 818.00 30.000 490.80 20.000 0.00 0.00 0.000 0.00 100.000 1636.00
327.20
of G.I, C.I, M.S, SCI, etc., -
121 188040 Dia of above
Dismantling of flushing 80mm 202.29 1 Each 25.00 5057.25 30.00 30.00 6068.70 5.000 1011.45 0.000 0.00 0.000 0.00 0.00 0.000 0.00 5.000 1011.45
0.00
cistern of any size including
122 189040 stacking
Dismantlingof serviceable gypsum 13.92 1 sqm 278.00 3869.76 278.00 278.00 3869.76 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
materials and disposal of 0.00
partitions including
123 189082 unserviceableof old
framework
Dismantling materials S.W. 39.93 1 metre 50.00 1996.50 50.00 50.00 1996.50 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
within 50m lead 0.00
(Aluminium/steel),and
pipes including breaking false o
124 189120 ceiling
etc.,
Taking including
- 150mm out diameter Wash stacking hand of 158.64 1 Each 25.00 3966.00 25.00 25.00 3966.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
serviceable material and 0.00
basin and sink complete
disposal
with all of ofparts unserviceable
including
125 257050 Supply Polyethylene 5.75 1 litre 72000.00 414000.00 72000.00 72000.00 414000.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
material within
making good 50m thelead walls 0.00
Vinyl Chloride water
complete,
storage if required
tank
126 257370 Supply of with cover and
Miscellaneous 287.50 1 Kg 20.00 5750.00 30.00 30.00 8625.00 5.000 1437.50 3.000 862.50 2.000 0.00 0.00 0.000 0.00 10.000 2875.00
suitable locking 575.00
UPVC fittings
arrangement
SCHEDULE 'A' TOTAL 4634817.87 6079809.82 392353.92 126994.73 47842.34 877800.96 0.00 1444991.95
Excess Excess 40% to Excess Remarks
As per Agreement As per requirement Up to 25% Total savings Total Excess
SSR/NS 25% to 40% 50% 50% and above
SI. No Description of work Rate Unit
Item.No
Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt
(+) 24 % ON SSR A 24% 1112356.29 1459154.36 94164.94 30478.73 11482.16 210672.23 0.00 346798.07
TOTAL OF SCHEDULE 'A' 5747174.16 7538964.17 486518.86 157473.46 59324.51 1088473.18 0.00 1791790.02
Add 22% ON SSR B 22% 101152.50 101152.50 0.00 0.00 0.00 0.00 0.00
0.00
TOTAL OF SCHEDULE 'B' 560936.58 560936.58 0.00 0.00 0.00 0.00 0.00
0.00
Schedule C (Cement )
1 033062 Supply and using cement at 4600.00 1 Tonne 80.54 370488.60 90.30 90.30 415380.00 9.759 44891.40 0.000 0.00 0.000 0.00 0.00 0.000 0.00 9.759 44891.40
0.00
worksite :OPC 53 grade
SCHEDULE C TOTAL 370488.60 415380.00 44891.40 0.00 0.00 0.00 44891.40
0.00
(=) 26% ON SSR "C " 0.26 96327.04 0.00 107998.80 10325.02 0.00 0.00 0.00 10325.02
0.00
Schedule D ( G I steel )
1 131131 Providing and fixing G.I. 124.61 1 metre 460.00 57320.60 50.00 410.00 460.00 57320.60 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
pipes complete with G.I 0.00
etc., - 15 mm dia. nominal
2 131132 Providing and fixing G.I. 152.67 1 metre 106.00 16183.02 50.00 56.00 106.00 16183.02 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
bore 0.00
pipes complete with G.I –
3 131133 Exposed onand
Providing wallfixing
etc., -G.I.
20 207.78 1 metre 92.00 19115.76 80.00 42.00 122.00 25349.16 23.000 4778.94 7.000 1454.46 0.000 0.00 0.00 0.000 0.00 30.000 6233.40
mm 0.00
pipesdia.complete
nominal bore with G.I
4 131135 Exposed onand
Providing wall fixing
etc., -G.I.
25 300.34 1 metre 29.00 8709.86 29.00 29.00 8709.86 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
mm 0.00
pipesdia.complete
nominal bore with G.I
5 131136 Exposed onand
Providing wall fixing
etc., -G.I.
40 382.63 1 metre 469.00 179453.47 150.00 319.00 469.00 179453.47 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
mm 0.00
pipesdia. nominal with
complete bore G.I –
6 131141 Exposed on wall
Providing and etc., fixing
- 50 172.64 1 metre 100.00 17264.00 100.00 100.00 17264.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
mm dia. nominal bore G.I. 0.00
medium grade
7 131142 Concealed pipe
Providing andetc., fixing
- 15 196.68 1 metre 50.00 9834.00 50.00 50.00 9834.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
mm dia. nominal bore G.I. 0.00
medium grade
8 131143 Concealed pipe
Providing andetc., fixing
- 20 247.44 1 metre 100.00 24744.00 100.00 100.00 24744.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
mm dia. nominal boreetc., - 0.00
medium grade G.I.
9 131156 Concealed
Providing pipe 25
and mm dia.
fixing 335.65 1 metre 693.00 232605.45 693.00 693.00 232605.45 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
nominal 0.00
medium bore grade G.I. etc., -
10 131161 50 mm
Making dia. nominal
connection bore of 231.04 1 Each 10.00 2310.40 10.00 10.00 2310.40 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
medium grade G.I.
11 131162 distributio
Making etc., - 25 to 40
connection of 520.14 1 Each 6.00 3120.84 6.00 6.00 3120.84 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
mm nominal bore 0.00
medium grade G.I.
12 132031 distributio
Providing etc.,
and -fixing
50 togun 80 339.74 1 Each 20.00 6794.80 20.00 20.00 6794.80 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
mm nominal 0.00
metal gate bore
valve with C.
13 132033 etc., - 25 mm
Providing andnominal
fixingboregun 527.98 1 Each 10.00 5279.80 10.00 10.00 5279.80 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
metal gate valve with C.
14 132034 etc.,
Providing and fixingbore
- 40 mm nominal gun 819.15 1 Each 8.00 6553.20 8.00 8.00 16.00 13106.40 2.000 1638.30 1.200 982.98 0.800 4.00 3276.60 0.000 0.00 8.000 6553.20
655.32
metal gate valve with C.
15 132081 etc., - 50 mm
Providing andnominal
fixingboregun 732.27 1 Each 4.00 2929.08 4.00 4.00 2929.08 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
metal non- return valve etc.,
-SCHEDULE
Horizontal 'D TOTAL 592218.28 605004.88 6417.24 2437.44 3276.60 0.00 12786.60
655.32
(+) 31% on Sch D 0.31 183587.67 187551.51 1347.62 755.61 1015.75 0.00 3963.85
203.15
NS Items SCHEDULE E
1 118010 Finishing Walls with Acrylic 46.01 1 sqm 300.00 13803.00 300.00 300.00 13803.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
0.00
smooth exerior paint with
2 118020 silicon
providing and additive
applying on to 62.13 1 sqm 1960.00 121774.80 1960.00 3000.00 186390.00
decorated
walls/ceilings. wallTwo surface
coats of of
required based
cement colour. putty Shade of
3 173010 supplying
,texture desidnand with fixingone 954.00 1 Sqm 125.00 119250.00 125.00 125.00 119250.00
white or any other
vertical
coat applied venetian cloth
@ 0.87 , litres
approved colour of
4 109410 blinds
per
NS-210-96 100mm
10sqm, wide
including
Providing and of 946.33 1 Sqm 105.00 99364.65 105.00 105.00 99364.65
approved brand including
desired
preparation
fixing shade
false andwith
ofofsurface
celing design
with
preparation surfacelight by
with
all sliding
contractor's
weight calciumtrack, chords,
materials
silicate
cleaning/scraping the
etc,
labour,complete
tools , with all
celing
surface with lead
tiles wire and
of lift,
size
brushes
contractor's
tackles,
595X595X10mm scaffoldings materialsect.
with
etc. to remove all loose 0.00 0.00 0.000 0.00 0.000 0.00 0.000 0.00 0.00 0.000 0.00 0.000 0.00
labore
densifiedtools
complete 1 lead
as and by
directed
The material lift 0.00
flakes dirt
and etc
engineer-in-charge
should ,and as per
be incomustible as
dust,grease,oil,mortar
instructions
SCHEDULE
per BS 476etc,. of
PartEngineer
'E' TOTAL
IV -in- 354192.45 418807.65 0.00 0.00 0.00 0.00 0.00
droppings so as to 0.00
charge
make the surface fit for
recving putty and applying
two coats to get edges an even of
minimum
surface with of time
15mm thick of
interval of
approved
Excess Excess 40% to Excess Remarks
As per Agreement As per requirement Up to 25% Total savings Total Excess
SSR/NS 25% to 40% 50% 50% and above
SI. No Description of work Rate Unit
Item.No
Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt
(+) 4% on Sch E 0.04 14167.70 16752.31 0.00 0.00 0.00 0.00 0.00
0.00
15 grouting
#N/A by the approved #N/A #N/A #N/A 0.00 #N/A 0.00 #N/A 0.000 #N/A 0.000 #N/A 0.000 0.00 #N/A 0.000 #N/A 0.000 #N/A
fixing compound, #N/A
complete as per
specification.
PRO PERCENTAGE +24% 0.00 140288.36 0.00 0.00 140288.36 0.00 140288.36
0.00
TOTAL OF SCHEDULE 'F' 0.00 724823.21 0.00 0.00 724823.21 0.00 724823.21
0.00
SCHEDULE 'A' 5747174.16 7538964.17 486518.86 157473.46 59324.51 1088473.18 0.00 1791790.02
SCHEDULE 'B' 560936.58 560936.58 0.00 0.00 0.00 0.00 0.00 0.00
SCHEDULE 'C' 466815.64 523378.80 55216.42 0.00 0.00 0.00 0.00 55216.42
SCHEDULE 'D' 775805.95 792556.39 7764.86 3193.05 858.47 4292.35 0.00 16750.45
SCHEDULE 'E' 368360.15 435559.96 0.00 0.00 0.00 0.00 0.00 0.00
SCHEDULE 'F' 0.00 724823.21 0.00 0.00 0.00 724823.21 0.00 724823.21
Financial Implication
Excess up to 25 % : 549500.15
Excess Excess 40% to Excess Remarks
As per Agreement As per requirement Up to 25% Total savings Total Excess
SSR/NS 25% to 40% 50% 50% and above
SI. No Description of work Rate Unit
Item.No
Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt Qty Amt
Excess % 32.68
Savings % 0.00
0.00
0.00
3.2 352.00
0.00
3.44 102.00
3.44 48.00
0.00
0.00
4.04 1.00
4.04 24.00
0.625 2.00
0.00
0.00
0.143 24.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.001 1.00
0.00
0.00
0.00
0.00
0.02 1.00
0.124 87.00
0.124 37.00
0.124 130.00
0.00
0.087 9.00
0.00
0.00
0.067 34.00
0.00
0.00
0.00
0.043 6.00
0.065 65.00
0.00
0.00
0.00
0.00
0 0.00
0 0.00
0 0.00
0.00
0.00
0.00
0.00
0.03 2.00
0.01 1.00
0.01 1.00
0.02 1.00
0.00
0.00
0.032 2.00
0.27 1.00
0.05 1.00
0.002 0.00
0.015 0.00
0.02 0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.05 1.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00 95.3
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.01 1.00
0.01 1.00
0.01 1.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.015 0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.01 0.00
0.087 17.00
953.00 95.3
051014 Brick work with non-modular (FPS) bricks of class etc., - Cement 1 cum 2311.21
mortar 1:4 (1 cement : 4 fine sand)
051182 Half brick masonry with bricks of class designatio etc., - Cement 1 Sqm 272.84
mortar 1:4 (1 Cement : 4 coarse sand)
051190 Extra for half Brick masonry in superstructure above plinth 1 Sqm 46.13
level upto floor two level
0.950
0.106