Académique Documents
Professionnel Documents
Culture Documents
2 • October 2002
micromaster
MICROMASTER 410/420/430/440
Inverters
0.12 kW to 250 kW
Trademarks / Internet
® COMBIMASTER, MICROMASTER, MIDIMASTER, SIMOVIS,
SITOR and SIVOLT are Siemens registered trademarks.
All other products and system names in this catalog are
(registered) trademarks of their respective owners and must be
treated accordingly.
s
MICROMASTER Overview
410/420/430/440 0
Inverters MICROMASTER 410
0.12 kW to 250 kW
0.12 kW to 0.75 kW
1
MICROMASTER 420
Catalog DA 51.2 × 2002 0.12 kW to 11 kW
2
with Changes October 2002
Supersedes: Catalog DA 51.2 × 2001 MICROMASTER 430
7.5 kW to 90 kW
3
MICROMASTER 440
0.12 kW to 250 kW
4
Appendix
A
The products and systems
referred to in this catalog are
marketed with a DQS certified
management system.
The DQS certificate is recog-
nized in all IQ Net countries. Management system
© Siemens AG 2002
MICROMASTER 410/420/430/440
Overview
■ Guidelines
0 Power ranges
Voltage ranges
gate drives and automatic machines
0.12 kW to 0.75 kW
100 V to 120 V 1 AC
pumps, fans and machine tools
0.12 kW to 11 kW
200 V to 240 V 1 AC
200 V to 240 V 1 AC 200 V to 240 V 3 AC
380 V to 480 V 3 AC
Section 1 Section 2
0/2 Siemens DA 51.2 · October 2002
MICROMASTER 410/420/430/440
Overview
7.5 kW to 90 kW
380 V to 480 V 3 AC
0.12 kW to 250 kW
200 V to 240 V 1 AC
0
200 V to 240 V 3 AC
380 V to 480 V 3 AC
500 V to 600 V 3 AC
• V/f characteristic • V/f characteristic
• Multipoint characteristic • Multipoint characteristic
(programmable V/f characteristic) (programmable V/f characteristic)
• FCC (flux current control) • FCC (flux current control)
• Vector control
Internal PID controller Internal PID controller
(autotuning)
6 digital inputs 6 digital inputs
2 analog inputs 2 analog inputs
1 PTC/KTY input 1 PTC/KTY input
2 analog outputs 2 analog outputs
3 relay outputs 3 relay outputs
The ideal partner for your automation tasks, The ideal partner for your automation tasks,
whether with SIMATIC S7-200, SIMATIC S7-300/400 (TIA) whether with SIMATIC S7-200, SIMATIC S7-300/400 (TIA)
or SIMOTION or SIMOTION
• Low-energy mode • 3 selectable drive data sets
• Load torque monitoring • Integrated brake chopper (up to 75 kW)
(detects running dry of pumps) • Torque control
• Motor staging
Section 3 Section 4
Siemens DA 51.2 · October 2002 0/3
MICROMASTER 410/420/430/440
Overview
■ Options
Various options are available Assignment of operator panels and modules to the converter ranges
for the MICROMASTER:
Accessories Order No. MICROMASTER
■ Filters
410 420 430 440
■ Chokes
■ Operator panels Operator panels
■ PROFIBUS module OP 6SE6400-0SP00-0AA0 %
0 ■ DeviceNet module
■ Pulse encoder evaluation
module
■ Gland plates
BOP
AOP
BOP-2
6SE6400-0BP00-0AA0
6SE6400-0AP00-0AA1
6SE6400-0BE00-0AA0
%
%
%
%
%
Modules
■ Mounting kits, etc.
PROFIBUS 6SE6400-1PB00-0AA0 % % %
DeviceNet 6SE6400-1DN00-0AA0 % % %
Pulse encoder evaluation 6SE6400-0EN00-0AA0 %
% Possible combination
Operator panels
Modules
1/8 Options
Description
1
Frame size AA Frame size AB
Description
1
Screwless control terminals fault ■ Stall prevention.
■ Side mounting possible, ■ Programmable accelera-
thus also usable with low tion (0 s to 650 s) with ramp
cabinet depth. smoothing
■ Fast current limit (FCL) for
trip free operation
Circuit Diagrams
I Fn 100 V to 120 V 1 AC
200 V to 240 V 1 AC
PE
O Jog P
1 + >
-
- 4.7 k AIN+
6
7
8
+10 V
max. 33 V
max. 5 mA AC
DIN1 1
DIN2 2
DIN3 3 DC
+
24 V 4 +24 V (max. 50 mA) DC+
-
5 DC -
0V
Voltage supply
CPU
(external or
internal source)
9 Serial
P+ inter-
10 face
N-
RS-485
PE U, V, W
A DA51-5033b
M
3~
DIN4 7
+
24 V 4
-
5
Voltage supply
(external or
internal source)
ADA51-5034b
Circuit Diagrams
Mains connections
1
View A
Motor connections
View A
A DA51-5035a
Output relay
RL1
RL1-B RL1-C
11 12
1 2 3 4 5 6 7 8 9 10
RS-485
(USS protocol)
Analog input
Digital inputs Voltage
supply 24 V Voltage
supply 10 V
Technical Data
1 Setpoint resolution
Digital inputs
Analog inputs
10 bit analog
0.01 Hz serial
3 programmable digital inputs, non-floating; PNP, SIMATIC-compatible
1, for setpoint (0 V to 10 V, scaleable or for use as 4th digital input)
Relay outputs 1, configurable 30 V DC/5 A (resistive), 250 V AC/2 A (inductive)
Serial interfaces RS-485, for operation with USS protocol
Motor cable length max. 30 m (shielded)
max. 50 m (unshielded)
Electromagnetic compatibility Inverter available with internal EMC filter to EN 61 800-3
(defined limits to EN 55 011, Class B)
Braking DC Braking, Compound Braking
Protection level IP 20
Temperature range –10 °C to +50 °C
Storage temperature –40 °C to +70 °C
Humidity 95 % (non-condensing)
Operational altitudes up to 1000 m above sea level without derating
Protection features for • under-voltage
• over-voltage
• overload
• earth faults
• short circuits
• stall prevention
• I2t motor thermal protection
• motor over-temperature
Conformity with standards u, cu, >, c-tick ● ✔
> marking Conformity with EC low voltage directive 73/23/EC
filtered versions also with electromagnetic compatibility directive 89/336/EC
Dimensions and weights Frame size (FS) H x W x D (mm) Weight, approx. (kg)
(without options) AA 150 x 69 x 118 0.8
AB 150 x 69 x 138 1.0
■ Derating Data
Pulse frequency
Technical Data
ADA51-5039a ADA51-5038a
100 100
Mains voltage
Rated output current
90 %
80 80
% 75
60 60
40 40
20 20
0
0 1000 2000 3000 m 4000
Operational altitude
0
0 1000 2000 3000 m 4000
Operational altitude 1
Selection and Ordering Data
Mains operating voltage 100 V to 120 V 1 AC, output voltage 200 V to 240 V 3 AC
0.12 0.16 4.6 0.9 AA 6SE6410-2UA11-2AA0 –
0.25 0.33 7.5 1.7 AA 6SE6410-2UA12-5AA0 –
0.37 0.50 10.1 2.3 AA 6SE6410-2UA13-7AA0 –
0.55 0.75 13.4 2.7 (3.2 at 40 °C) AB 6SE6410-2UA15-5BA0 –
Mains operating voltage 200 V to 240 V 1 AC, output voltage 200 V to 240 V 3 AC
0.12 0.16 1.5 0.9 AA 6SE6410-2UB11-2AA0 6SE6410-2BB11-2AA0
0.25 0.33 3.0 1.7 AA 6SE6410-2UB12-5AA0 6SE6410-2BB12-5AA0
0.37 0.50 4.4 2.3 AA 6SE6410-2UB13-7AA0 6SE6410-2BB13-7AA0
0.55 0.75 5.8 3.2 AB 6SE6410-2UB15-5BA0 6SE6410-2BB15-5BA0
0.75 1.0 7.8 3.6 (4.2 at 40 °C) AB 6SE6410-2UB17-5BA0 6SE6410-2BB17-5BA0
Options
1
EN 55 011 Class B.
used in order to reduce the power utility company for
current peaks. authorization to connect the
devices to the public power
The line commutating chokes
supply.
are designed as footprint
No limits are currently defined
chokes and are fitted between
in the EN 61 000-3-2 standard
the inverter and the mounting
for professionally used
plate.
devices with a connected load
> 1 kW. This means that the
inverters with an output power
³ 0.75 kW comply with the
EN 61 000-3-2 standard.
Options
200 V to
240 V 1 AC
0.55
0.12
0.25
6SE6410-2UA15-5BA0 *)
6SE6410-2UB11-2AA0
6SE6410-2UB12-5AA0
–
6SE6400-2FL01-0AB0 6SE6400-3CC00-4AB0
3NA3807
3NA3803
3RV1021-4AA10
3RV1021-1BA10
3RV1021-1EA10
1
0.37 6SE6410-2UB13-7AA0 6SE6400-3CC01-0AB0 3RV1021-1FA10
0.55 6SE6410-2UB15-5BA0 3RV1021-1HA10
0.75 6SE6410-2UB17-5BA0 3NA3805 3RV1021-1JA10
Inverter
with internal filter Class B
200 V to 0.12 6SE6410-2BB11-2AA0 – 6SE6400-3CC00-4AB0 3NA3803 3RV1021-1BA10
240 V 1 AC 0.25 6SE6410-2BB12-5AA0 – 3RV1021-1EA10
0.37 6SE6410-2BB13-7AA0 – 6SE6400-3CC01-0AB0 3RV1021-1FA10
0.55 6SE6410-2BB15-5BA0 – 3RV1021-1HA10
0.75 6SE6410-2BB17-5BA0 – 3NA3805 3RV1021-1JA10
*) With these inverters, the choke cannot be mounted in the substructure; it must be mounted upright.
■ Documentation
Type of documentation Language Order No.
Operating instructions 1) German 6SE6400-5EA00-0AP0
(paper version) English 6SE6400-5EA00-0BP0
French 6SE6400-5EA00-0DP0
Italian 6SE6400-5EA00-0CP0
Spanish 6SE6400-5EA00-0EP0
Parameter list 1) German 6SE6400-5EB00-0AP0
(paper version) English 6SE6400-5EB00-0BP0
French 6SE6400-5EB00-0DP0
Italian 6SE6400-5EB00-0CP0
Spanish 6SE6400-5EB00-0EP0
Getting Started Guide 1) Multilanguage –
(paper version),
included with every inverter
1) Available on Internet at
http://www.siemens.com/
micromaster.
Dimension Drawings
(0.47)
Ø 4.5
(0.47)
12
Ø 4.5 12 (0.18)
(0.18)
ADA51-5037a
A DA51-5036a
160 (6.30)
160 (6.30)
150 (5.9)
150 (5.9)
1
(5 138
(4 118
3)
5)
.4
.6
69 69
(2.72) (2.72)
70 149
50 (2.76) (5.87)
(1.97) 73 (2.87)
213 (8.39)
200 (7.87)
ADA51-5041b
ADA51-5040b
2/9 Options
Description
2
■ Applications ■ Main Characteristics ■ Options (Overview) ■ International Standards
The MICROMASTER 420 ■ Simple commissioning ■ EMC filters Class A/B ■ The MICROMASTER 420
inverter is suitable for a variety ■ Modular construction ■ Line commutating chokes inverter complies with the
of variable-speed drive allows maximum configura- ■ Output chokes
requirements of the EU low-
applications. It is especially tion flexibility voltage guideline; filtered
■ Gland plates
suitable for applications for ■ Three fully programmable versions also comply with
pumps, fans and conveyor ■ BOP basic operator panel the EU EMC guideline
isolated digital inputs for parameterizing an
systems. ■ The MICROMASTER 420
■ One scalable analog input inverter
It is especially characterized (0 V to 10 V) can also be inverter has the > marking
■ AOP advanced operator
by its customer-oriented used as a 4th digital input ■ u and cu listed
panel with plain-text and
performance and ease of use. ■ One programmable analog multilingual display
✔
■ c-tick ●
Its large supply-voltage range output (0 mA to 20 mA)
enables it to be used all over ■ Communications modules Note:
■ One fully programmable
the world. – PROFIBUS See Appendix for standards.
relay output
(30 V DC/5 A, resistive – DeviceNet
■ Design 250 V AC/2 A, inductive) ■ PC connection kits
The MICROMASTER 420 has ■ Silent motor operation is ■ Assembly kits for mounting
a modular design. The opera- selectable when using high the operator panels in the
tor panels and communica- switching frequencies, control cabinet doors
tions modules can be easily adjustable (observe derat- ■ PC commissioning tools,
exchanged without requiring ing if necessary) running under Windows
any tools. ■ Complete inverter and 95/98 and NT/2000.
motor protection.
Description
Circuit Diagram
O p e r a to r p a n e l ( O p tio n )
2 0 0 V to 2 4 0 V 1 /3 A C
3 8 0 V to 4 8 0 V 3 A C
P E
V o lta g e s u p p ly a n d F S 1
a n a lo g in p u t
In p u t v o lta g e : 0 V to + 1 0 V , P E L , N (L 1 , L 2 )
s c a la b le o r
L 1 , L 2 , L 3
1 + 1 0 V
2 0 V
+
-> 4 . 7 k 9 A IN + 3 A
-
A IN - 4
D
2 D IN 1
D IN 2
D IN 3
m a x . 3 3 V
m a x . 5 m A
6
7
5
A C
D C
+
2 4 V 8
- + 2 4 V (m a x .1 0 0 m A )
9 D C L in k
0 V ( is o la te d )
V o lta g e C P U
s u p p ly
R L 1
O u tp u t re la y c o n ta c ts D C
2 5 0 V A C , m a x . 2 A 1 0
R L 1 -B
( in d u c tiv e lo a d ) 1 1
3 0 V D C , m a x . 5 A R L 1 -C
(re s is tiv e lo a d ) A C
A n a lo g o u tp u t 1 2 A
A O U T +
0 m A to 2 0 m A 1 3
A O U T - D
W h e n a c o m m u n ic a tio n s 1 4 S e r ia l
P + in te r -
m o d u le is c o n n e c te d , th e 1 5
N - fa c e
s e r ia l in t e r f a c e d o e s n 't w o r k . R S -4 8 5
P E U , V , W
A D A 5 1 -5 0 0 3 i
M
3 ~
2
0V
DIN4 3
4
+
24 V
-
9
0 V (isolated)
ADA51-5004e
Circuit Diagram
View A
DC link
connection
Mains
connection
Motor
connection
2
View A
AOUT+ AOUT- P+ N-
12 13 14 15
Output relay
RL1
Analog output RS-485
(USS protocol)
5 6 7 8 9 10 11
1 2 3 4
Technical Data
2
Relay output 1, configurable 30 V DC/5 A (resistive), 250 V AC/2 A (inductive)
Analog output 1, configurable (0 mA to 20 mA)
Serial interfaces RS-485, optional RS-232
Motor cable length
without output choke max. 50 m (shielded)
max. 100 m (unshielded)
with output choke max. 200 m (shielded)
max. 300 m (unshielded)
Electromagnetic Inverter available with internal EMC filter Class A;
compatibility available as options are EMC filters to EN 55 011, Class A or Class B
Braking DC Braking, Compound Braking
Protection level IP 20
Temperature range –10 °C to +50 °C
Storage temperature –40 °C to +70 °C
Humidity 95% (non-condensing)
Operational altitudes up to 1000 m above sea level without derating
Protection features for • under-voltage
• over-voltage
• overload
• earth faults
• short circuits
• stall prevention
• locked motor
• motor over-temperature
• inverter over-temperature
• parameter PIN protection
Conformity with standards u, cu, >, c-tick ● ✔
> marking Conformity with EC low voltage directive 73/23/EC;
filtered versions also with electromagnetic compatibility directive 89/336/EC
Dimensions and weights Frame size (FS) H x W x D (mm) Weight, approx. (kg)
(without options) A 173 x 73 x 149 1.0
B 202 x 149 x 172 3.3
C 245 x 185 x 195 5.0
Technical Data
■ Derating Data
Pulse frequency
Operating temperature
A D A 5 1 -5 0 1 7 e
1 0 0
2
R a te d o u tp u t c u rre n t
%
8 0
6 0
5 0
4 0
2 0
0
-1 0 0 1 0 2 0 3 0 4 0 5 0 6 0 °C 7 0
O p e r a tin g te m p e r a tu r e
100
Rated output current
%
80
60
40
20
0
0 1000 2000 3000 m 4000
Operational altitude
100
Mains voltage
%
80
77
60
40
20
0
0 1000 2000 3000 m 4000
Operational altitude
2 0.55
0.75
1.1
1.5
0.75
1.0
1.5
2.0
2.1
2.9
4.1
5.6
3.0
3.9
5.5
7.4
A
A
B
B
6SE6420-2UC15-5AA0
6SE6420-2UC17-5AA0
6SE6420-2UC21-1BA0
6SE6420-2UC21-5BA0
–
–
–
–
2.2 3.0 7.6 10.4 B 6SE6420-2UC22-2BA0 –
3.0 4.0 10.5 13.6 C 6SE6420-2UC23-0CA0 6SE6420-2AC23-0CA0
4.0 5.0 13.1 17.5 C 6SE6420-2UC24-0CA0 6SE6420-2AC24-0CA0
5.5 7.5 17.5 22.0 C 6SE6420-2UC25-5CA0 6SE6420-2AC25-5CA0
Options
2
– 380 V to 480 V 3 AC, in practice are between 10 mA
tions (1st environment).
frame size A. and 50 mA. The exact values
depend on the design, envi- For devices with 250 W and
With this filter, the inverter ronment and cable lengths. 370 W it is necessary either to
complies with the emission Interference-free operation fit the recommended input
standard EN 55 011, Class B. with residual current operated chokes or to apply to the
The requirements are fulfilled devices with a trigger value of power utility company for
using shielded cables with a 30 mA cannot be guaranteed. authorization to connect the
max. length of 25 m. However, operation with resid- devices to the public power
ual current operated devices supply.
Additional EMC filter, with a trigger value of 300 mA No limits are currently defined
Class B is possible. Please refer to the in the EN 61 000-3-2 standard
Instruction Manual for details. for professionally used
Obtainable for inverters with devices with a connected load
an internal Class A EMC > 1 kW. This means that the
filter A. inverters with an output power
With this filter, the inverter ³ 0.75 kW comply with the
complies with the emission EN 61 000-3-2 standard.
standard EN 55 011, Class B.
The requirements are fulfilled
using shielded cables with a
max. length of 25 m.
Options
Options
2
0.37 6SE6420-2UC13-7AA0 –
0.55 6SE6420-2UC15-5AA0 –
0.75 6SE6420-2UC17-5AA0 –
1.1 6SE6420-2UC21-1BA0 6SE6400-2FA01-4BC0 6SE6400-2FB01-4BC0 –
1.5 6SE6420-2UC21-5BA0 –
2.2 6SE6420-2UC22-2BA0 –
3.0 6SE6420-2UC23-0CA0 – – –
4.0 6SE6420-2UC24-0CA0 – – –
5.5 6SE6420-2UC25-5CA0 – – –
380 V to 480 V 3 AC 0.37 6SE6420-2UD13-7AA0 6SE6400-2FA00-6AD0 6SE6400-2FB00-6AD0 –
0.55 6SE6420-2UD15-5AA0 –
0.75 6SE6420-2UD17-5AA0 –
1.1 6SE6420-2UD21-1AA0 –
1.5 6SE6420-2UD21-5AA0 –
2.2 6SE6420-2UD22-2BA0 – – –
3.0 6SE6420-2UD23-0BA0 – – –
4.0 6SE6420-2UD24-0BA0 – – –
5.5 6SE6420-2UD25-5CA0 – – –
7.5 6SE6420-2UD27-5CA0 – – –
11 6SE6420-2UD31-1CA0 – – –
Inverter
with internal filter Class A
200 V to 240 V 1 AC 0.12 6SE6420-2AB11-2AA0 – – 6SE6400-2FS01-0AB0
0.25 6SE6420-2AB12-5AA0 – –
0.37 6SE6420-2AB13-7AA0 – –
0.55 6SE6420-2AB15-5AA0 – –
0.75 6SE6420-2AB17-5AA0 – –
1.1 6SE6420-2AB21-1BA0 – – 6SE6400-2FS02-6BB0
1.5 6SE6420-2AB21-5BA0 – –
2.2 6SE6420-2AB22-2BA0 – –
3.0 6SE6420-2AB23-0CA0 – – 6SE6400-2FS03-5CB0
200 V to 240 V 3 AC 3.0 6SE6420-2AC23-0CA0 – – 6SE6400-2FS03-8CD0
4.0 6SE6420-2AC24-0CA0 – –
5.5 6SE6420-2AC25-5CA0 – –
380 V to 480 V 3 AC 2.2 6SE6420-2AD22-2BA0 – – 6SE6400-2FS01-6BD0
3.0 6SE6420-2AD23-0BA0 – –
4.0 6SE6420-2AD24-0BA0 – –
5.5 6SE6420-2AD25-5CA0 – – 6SE6400-2FS03-8CD0
7.5 6SE6420-2AD27-5CA0 – –
11 6SE6420-2AD31-1CA0 – –
Options
2
0.37 6SE6420-2UC13-7AA0 – 6SE6400-3CC00-5AC0
0.55 6SE6420-2UC15-5AA0 –
0.75 6SE6420-2UC17-5AA0 –
1.1 6SE6420-2UC21-1BA0 – 6SE6400-3CC00-8BC0 6SE6400-3TC01-0BD0
1.5 6SE6420-2UC21-5BA0 – 6SE6400-3CC01-4BD0
2.2 6SE6420-2UC22-2BA0 –
3.0 6SE6420-2UC23-0CA0 – 6SE6400-3CC01-7CC0 6SE6400-3TC03-2CD0
4.0 6SE6420-2UC24-0CA0 – 6SE6400-3CC03-5CD0
5.5 6SE6420-2UC25-5CA0 –
380 V to 480 V 3 AC 0.37 6SE6420-2UD13-7AA0 – 6SE6400-3CC00-2AD0 6SE6400-3TC01-0BD0
0.55 6SE6420-2UD15-5AA0 – (not suitable for footprint
mounting)
0.75 6SE6420-2UD17-5AA0 – 6SE6400-3CC00-4AD0
1.1 6SE6420-2UD21-1AA0 –
1.5 6SE6420-2UD21-5AA0 – 6SE6400-3CC00-6AD0
2.2 6SE6420-2UD22-2BA0 – 6SE6400-3CC01-0BD0 6SE6400-3TC01-0BD0
3.0 6SE6420-2UD23-0BA0 –
4.0 6SE6420-2UD24-0BA0 – 6SE6400-3CC01-4BD0
5.5 6SE6420-2UD25-5CA0 – 6SE6400-3CC02-2CD0 6SE6400-3TC03-2CD0
7.5 6SE6420-2UD27-5CA0 –
11 6SE6420-2UD31-1CA0 – 6SE6400-3CC03-5CD0
Inverter
with internal filter Class A
200 V to 240 V 1 AC 0.12 6SE6420-2AB11-2AA0 – 6SE6400-3CC00-4AB0 6SE6400-3TC00-4AD1
0.25 6SE6420-2AB12-5AA0 –
0.37 6SE6420-2AB13-7AA0 – 6SE6400-3CC01-0AB0
0.55 6SE6420-2AB15-5AA0 –
0.75 6SE6420-2AB17-5AA0 –
1.1 6SE6420-2AB21-1BA0 – 6SE6400-3CC02-6BB0 6SE6400-3TC01-0BD0
1.5 6SE6420-2AB21-5BA0 –
2.2 6SE6420-2AB22-2BA0 –
3.0 6SE6420-2AB23-0CA0 – 6SE6400-3CC03-5CB0 6SE6400-3TC03-2CD0
200 V to 240 V 3 AC 3.0 6SE6420-2AC23-0CA0 – 6SE6400-3CC01-7CC0 6SE6400-3TC03-2CD0
4.0 6SE6420-2AC24-0CA0 – 6SE6400-3CC03-5CD0
5.5 6SE6420-2AC25-5CA0 –
380 V to 480 V 3 AC 2.2 6SE6420-2AD22-2BA0 – 6SE6400-3CC01-0BD0 6SE6400-3TC01-0BD0
3.0 6SE6420-2AD23-0BA0 –
4.0 6SE6420-2AD24-0BA0 – 6SE6400-3CC01-4BD0
5.5 6SE6420-2AD25-5CA0 – 6SE6400-3CC02-2CD0 6SE6400-3TC03-2CD0
7.5 6SE6420-2AD27-5CA0 –
11 6SE6420-2AD31-1CA0 – 6SE6400-3CC03-5CD0
Options
2
0.37 6SE6420-2UC13-7AA0 3RV1021-1DA10
0.55 6SE6420-2UC15-5AA0 3RV1021-1FA10
0.75 6SE6420-2UC17-5AA0 3RV1021-1GA10
1.1 6SE6420-2UC21-1BA0 6SE6400-0GP00-0BA0 3NA3805 3RV1021-1HA10
1.5 6SE6420-2UC21-5BA0 3RV1021-1JA10
2.2 6SE6420-2UC22-2BA0 3NA3807 3RV1021-4AA10
3.0 6SE6420-2UC23-0CA0 6SE6400-0GP00-0CA0 3NA3810 3RV1021-4BA10
4.0 6SE6420-2UC24-0CA0 3NA3812 3RV1021-4DA10
5.5 6SE6420-2UC25-5CA0 3NA3814 3RV1031-4FA10
380 V to 480 V 3 AC 0.37 6SE6420-2UD13-7AA0 6SE6400-0GP00-0AA0 3NA3803 3RV1021-1CA10
0.55 6SE6420-2UD15-5AA0 3RV1021-1DA10
0.75 6SE6420-2UD17-5AA0 3RV1021-1EA10
1.1 6SE6420-2UD21-1AA0 3RV1021-1GA10
1.5 6SE6420-2UD21-5AA0 3RV1021-1HA10
2.2 6SE6420-2UD22-2BA0 6SE6400-0GP00-0BA0 3NA3805 3RV1021-1JA10
3.0 6SE6420-2UD23-0BA0 3RV1021-1KA10
4.0 6SE6420-2UD24-0BA0 3NA3807 3RV1021-4AA10
5.5 6SE6420-2UD25-5CA0 6SE6400-0GP00-0CA0 3RV1021-4CA10
7.5 6SE6420-2UD27-5CA0 3NA3810 3RV1031-4EA10
11 6SE6420-2UD31-1CA0 3NA3814 3RV1031-4FA10
Inverter
with internal filter Class A
200 V to 240 V 1 AC 0.12 6SE6420-2AB11-2AA0 6SE6400-0GP00-0AA0 3NA3803 3RV1021-1CA10
0.25 6SE6420-2AB12-5AA0 3RV1021-1FA10
0.37 6SE6420-2AB13-7AA0 3RV1021-1HA10
0.55 6SE6420-2AB15-5AA0 3RV1021-1JA10
0.75 6SE6420-2AB17-5AA0 3NA3805 3RV1021-1KA10
1.1 6SE6420-2AB21-1BA0 6SE6400-0GP00-0BA0 3NA3807 3RV1021-4BA10
1.5 6SE6420-2AB21-5BA0 3RV1021-4DA10
2.2 6SE6420-2AB22-2BA0 3NA3810 3RV1031-4EA10
3.0 6SE6420-2AB23-0CA0 6SE6400-0GP00-0CA0 3NA3812 3RV1031-4GA10
200 V to 240 V 3 AC 3.0 6SE6420-2AC23-0CA0 6SE6400-0GP00-0CA0 3NA3810 3RV1021-4BA10
4.0 6SE6420-2AC24-0CA0 3NA3812 3RV1021-4DA10
5.5 6SE6420-2AC25-5CA0 3NA3814 3RV1031-4FA10
380 V to 480 V 3 AC 2.2 6SE6420-2AD22-2BA0 6SE6400-0GP00-0BA0 3NA3805 3RV1021-1JA10
3.0 6SE6420-2AD23-0BA0 3RV1021-1KA10
4.0 6SE6420-2AD24-0BA0 3NA3807 3RV1021-4AA10
5.5 6SE6420-2AD25-5CA0 6SE6400-0GP00-0CA0 3RV1021-4CA10
7.5 6SE6420-2AD27-5CA0 3NA3810 3RV1031-4EA10
11 6SE6420-2AD31-1CA0 3NA3814 3RV1031-4FA10
Options
Options
■ Documentation
Type of documentation Language Order No.
Docu-Pack, Multilanguage 6SE6400-5AB00-1AP0
supplied with each inverter,
containing CD-ROM 1) and
Getting-Started Guide 2)
(paper version)
Operating instructions 2) German 6SE6400-5AA00-0AP0
(paper version) English 6SE6400-5AA00-0BP0
French 6SE6400-5AA00-0DP0
Italian 6SE6400-5AA00-0CP0
Spanish 6SE6400-5AA00-0EP0
Parameter list 2) German 6SE6400-5BA00-0AP0
(paper version) English 6SE6400-5BA00-0BP0
French 6SE6400-5BA00-0DP0
Italian 6SE6400-5BA00-0CP0
Spanish 6SE6400-5BA00-0EP0
Dimension Drawings
(2.28)
58
173 (6.81)
160 (6.29)
DIN Rail
ADA51-5007c
ADA51-5000e
147 (5.79)
195 (7.68)
Fixing with
2 bolts M4, 2 nuts M4,
(5 149
2 washers M4
7)
.8
2 Drill pattern
174 (6.85)
ADA51-5008b
202 (7,95)
258 (10.16)
ADA51-5001d
138 (5.43)
(6 172
Fixing with
7)
.7
Drill pattern
204 (8.03)
ADA51-5009b
245 (9.65)
ADA51-5002d
309 (12.16)
174 (6.85)
Fixing with
(7 195
8)
Dimension Drawings
38 185 (7.28)
(1.5) 156 (6.14)
24 149 (5.87)
73 (2.87)
23.5 (0.94) 120 (4.72)
(0.93) 56 (2.2)
4 x M5
4 x M4
219 (8.62)
232 (9.13)
2 x M4
187 (7.36)
200 (7.87)
204 (8.03)
245 (9.65)
174 (6.85)
187 (7.36)
213 (8.39)
174 (6.85)
200 (7.87)
160 (6.3)
ADA51-5010e
ADA51-5011c
ADA51-5012c
42.5 (1.67) 49.5 (1.95)
138 174 54 (2.13)
(5.43) (6.85)
Filter for frame size A for frame size B for frame size C
c b
c b 2
Line Dimensions Weight
commutating (max.)
choke for a b c kg
frame size A 200 75.5 50 0.8
(7.87) (2.97) (1.97)
a
a
DA51-5013e
DA51-5014d
c b
c b
DA51-5049
DA51-5050
Output choke
6SE6400-3TC00-4AD1 6SE6400-3TC01-0BD0
6SE6400-3TC03-0CD0
Dimension Drawings
DA51-5016b
Example:
Assembly of inverter, choke
2 and filter
If additional accessories are
required, they must be mounted
at the side.
3/9 Options
Description
■
allows maximum configura-
tion flexibility
Six programmable isolated
■ Output chokes
■ Gland plates
■ BOP basic operator panel 2
(BOP-2) for parameterizing
inverter complies with the
requirements of the EU low-
voltage guideline; filtered
versions also comply with
cations. It is especially suit- digital inputs the EU EMC guideline
able for use with industrial an inverter
■ The MICROMASTER 430
■ Two scalable analog inputs ■ Communications modules
pumps and fans. The inverter inverter has the > marking
is especially characterized by (0 V to 10 V, 0 mA to 20 mA) – PROFIBUS
can also be used as a 7th/ ■ u and cu listed
its customer-oriented perfor-
mance and ease of use. It has 8th digital input – DeviceNet ✔
■ c-tick ●
■ PC connection kits
more inputs and outputs than ■ Two programmable analog Note:
outputs (0 mA to 20 mA) ■ Assembly kits for mounting
the MICROMASTER 420, an
optimized operator panel with ■ Three fully programmable the operator panels in the See Appendix for standards.
manual/automatic switchover, relay outputs control cabinet doors
and adapted software func- (30 V DC/5 A, resistive ■ PC commissioning tools,
tionality. 250 V AC/2 A, inductive) running under Windows 95/
■ Silent motor operation is 98 and NT/2000.
■ Design selectable when using high
The MICROMASTER 430 switching frequencies
inverter has a modular design. (observe derating if neces-
sary)
The operator panels and ■ Complete inverter and
communications modules can motor protection
be easily exchanged.
■ Control of up to three addi-
tional drives on the basis of
PID control (motor staging)
■ Operation of drive directly
on mains (with external
bypass circuit)
■ Energy saving mode
■ Detects running-dry of
pumps
(belt failure detection).
Description
Circuit Diagrams
3 8 0 to 4 8 0 V 3 A C
P E
F S 1
+ 1 0 V P E F o r a d d itio n a l d ig ita l in p u ts
B O P
1 S e r ia l L 1 , L 2 , L 3 (D IN 7 , D IN 8 ) e x te rn a l
P ro to c o l c o n n e c tio n s s h o u ld b e m a d e :
0 V
2
A IN 1 +
-> 4 , 7 k 9 A
3
1 1
A IN 1 - D
4 2 2
A IN 2 + A 3 1 0
1 0
D 4 1 1
A IN 2 - D IN 7 D IN 8
1 1
D IN 1
5 N o te s :
D IN 2 W h e n a n a n a lo g in p u t is
A C c o n fig u re d a s a d ig ita l in p u t
6
D IN 3 th e th re s h o ld v a lu e s a r e a s
O p to is o la tio n
fo llo w s :
7 D C
D IN 4 1 .7 5 V D C = o ff
3 .7 V D C = o n
8
D IN 5
A IN 1 : 0 V to 1 0 V , 0 m A to 2 0 m A
1 6 a n d -1 0 V to + 1 0 V
3
D IN 6 A IN 2 : 0 V to 1 0 V
1 7 a n d 0 m A to 2 0 m A
P N P O u tp u t + 2 4 V
( is o la te d )
o r 9
N P N O u tp u t 0 V
( is o la te d )
2 8
P T C A
A
M o to r 1 4
P T C /K T Y P T C B D
1 5 C P U
A O U T 1 +
0 - 2 0 m A , A D C
1 2
m a x . 5 0 0 9 A O U T 1 - D
1 3
A C
A O U T 2 +
A
0 - 2 0 m A , 2 6
m a x . 5 0 0 9 A O U T 2 - D
2 7
R L 1
R L 1 - C 6 0 H z
2 0 N o t
R L 1 - B u s e d 5 0 H z
1 9 1 2
R L 1 - A D IP S w itc h e s
1 8
O u tp u t re la y R L 2 (o n C o n tro l B o a rd )
c o n ta c ts
2 5 0 V A C , m a x . 2 A R L 2 - C
2 2
( in d u c tiv e lo a d ) R L 2 - B
3 0 V D C , m a x . 5 A 2 1
( r e s is tiv e lo a d ) A IN 1 A IN 2
R L 3
0 - 2 0 m A
R L 3 - C
2 5 0 - 1 0 V
R L 3 - B
2 4 1 2
R L 3 - A D IP S w itc h e s
2 3 (o n I/O B o a rd )
W h e n a c o m m u n ic a tio n s
P +
m o d u le is c o n n e c te d , 2 9 R S 4 8 5
th e s e r ia l in te r fa c e
N -
d o e s n 't w o rk . 3 0 P E U , V , W
A D A 5 1 -5 0 4 8 c
M
3 ~
Circuit Diagrams
View A
Mains
connections
Motor
connections
View A
AIN1 AIN2 RL1-A RL1-B RL1-C RL2-B RL2-C RL3-A RL3-B RL3-C
A DA51-5025
S1 S2
DIP Switches:
0 mA to 20 mA
or
18 19 20 21 22
3
0 V to 10 V
12 13 14 18
15 16 17 26 27 28 29 30
NPN *)
(DIN7) (DIN8)
+10 V 0V AIN1+ AIN1- DIN1 DIN2 DIN3 DIN4 +24 V AIN2+ AIN2-
1 2 3 18
4 5 6 7 8 9 10 11
PNP *)
Technical Data
3 Electromagnetic compatibility
Braking
Protection level
Optional EMC filters to EN 55 011, Class B (for frame size C),
Inverter with internal filter Class A available
DC Braking, Compound Braking
IP 20
Temperature range –10 °C to +40 °C
Storage temperature –40 °C to +70 °C
Relative humidity 95% (non-condensing)
Installation height up to 1000 m above sea level without derating
Protection features for • under-voltage
• over-voltage
• overload
• earth faults
• short circuits
• stall prevention
• locked motor
• motor over-temperature
• inverter over-temperature
• parameter PIN protection
Conformity with standards u, cu, >, c-tick ● ✔
> marking Conformity with EC low voltage directive 73/23/EC
filtered versions also with electromagnetic compatibility directive 89/336/EC
Dimensions and weights Frame size (FS) H x W x D, max. (mm) Weight, approx. (kg)
(without options) C 245 x 185 x 195 5.7
D 520 x 275 x 245 17
E 650 x 275 x 245 22
F without filter 850 x 350 x 320 56
F with filter 1150 x 350 x 320 75
Technical Data
■ Derating Data
Pulse frequency
Operating temperature
A D A 5 1 -5 0 4 5 a
1 0 0
R a te d o u tp u t c u rre n t
%
8 0
6 0
5 0
4 0
2 0
0
-1 0 0 1 0 2 0 3 0 4 0 °C 5 0
O p e r a tin g te m p e r a tu r e
3
Installation height above sea level
100
Rated output current
%
80
60
40
20
0
0 1000 2000 3000 m 4000
Operational altitude
100
Mains voltage
%
80
77
60
40
20
0
0 1000 2000 3000 m 4000
Operational altitude
Options
Options
3 18.5
22
30
37
6SE6430-2UD31-8DA0
6SE6430-2UD32-2DA0
6SE6430-2UD33-0DA0
6SE6430-2UD33-7EA0
3NA3020
3NA3022
3NA3024
3NA3030
3NE1817-0
3NE1818-0
3NE1820-0
3NE1021-0
3RV1042-4KA10
3RV1042-4MA10
3VL1712- . DD33- . . . .
45 6SE6430-2UD34-5EA0 3NA3032 3NE1022-0 3VL1716- . DD33- . . . .
55 6SE6430-2UD35-5FA0 3NA3036 3NE1224-0 3VL3720- . DC36- . . . .
75 6SE6430-2UD37-5FA0 3NE1225-0 3VL3725- . DC36- . . . .
90 6SE6430-2UD38-8FA0 3NA3140 3VL4731- . DC36- . . . .
l Use in America
requires u-listed fuses
such as e.g. the Class
NON range from
Bussmann.
Options
Options
3
Size (height x width x depth) 161 mm x 73 mm x 46 mm
Degree of protection IP 20
Degree of pollution 2 to IEC 60 664-1 (DIN VDE 0110/T1), no condensation permitted during operation
Mechanical strength to DIN IEC 60 068-2-6 (if module installed correctly)
• Stationary Deflection 0.15 mm in the frequency range of 10 Hz to 58 Hz
Acceleration 19.6 m/s2 in the frequency range of 58 Hz to 500 Hz
• Transport Deflection 3.5 mm in the frequency range of 5 Hz to 9 Hz
Acceleration 9.8 m/s2 in the frequency range of 9 Hz to 500 Hz
Climatic category (during operation) 3K3 to DIN IEC 60 721-3-3
Cooling method Natural air cooling
Permissible ambient or cooling agent temperature
• in operation –10 °C to +50 °C (14 °F to 122 °F)
• during storage and transport –25 °C to +70 °C (–13 °F to 158 °F)
Relative humidity (permissible humidity rating)
• in operation £ 85% (non-condensing)
• during storage and transport £ 95%
Electromagnetic compatibility Emission to EN 55 011 (1991) Class A
Interference to IEC 60 801-3 and EN 61 000-4-3
radiation
Supply voltage 6.5 V ± 5%, max. 300 mA, 6.5 V ± 5%, max. 300 mA
internal from inverter or internal from inverter and
24 V ± 10%, max. 350 mA, external 24 V, max. 60 mA from DeviceNet bus
Output voltage 5 V ± 10%, max. 100 mA, –
galvanically isolated supply
• for terminating the serial interface bus or
• for supplying the OLP (Optical Link Plug)
Data transmission rate max. 12 Mbaud 125, 250 and 500 kbaud
Options
■ Documentation
Type of documentation Language Order No.
Docu-Pack, Multilanguage 6SE6400-5AE00-1AP0
supplied with each inverter,
containing CD-ROM 1) and
Getting Started Guide 2)
(paper version)
Operating instructions 2) German 6SE6400-5AE00-0AP0
(paper version) English 6SE6400-5AE00-0BP0
French 6SE6400-5AE00-0DP0
Italian 6SE6400-5AE00-0CP0
Spanish 6SE6400-5AE00-0EP0
Parameter list 2) German 6SE6400-5AF00-0AP0
(paper version) English 6SE6400-5AF00-0BP0
French 6SE6400-5AF00-0DP0
Italian 6SE6400-5AF00-0CP0
Spanish 6SE6400-5AF00-0EP0
Dimension Drawings
Drill pattern
204 (8.03)
ADA51-5009b
245 (9.65)
ADA51-5002d
309 (12.16)
174 (6.85)
Fixing with
(7 195
8)
.6
4 bolts M5
185 (7.28) 4 nuts M5
4 washers M5
Inverter frame size C Tightening torque with
washers fitted: 3.0 Nm
Inverter frame size C
Ventilation clearance required with gland plates
at top and bottom: 100 mm
3 Drill pattern
Drill pattern
616.4 (24.27)
650 (25.59)
520 (20.47)
486 (19.13)
ADA51-5021b
ADA51-5020b
235 (9.25)
235 (9.25)
(9 245
5)
(9 245
5)
.6
Dimension Drawings
Drill pattern
Drill pattern
1110 (43.70)
1150 (45.28)
850 (33.46)
810 (31.89)
3
ADA51-5023b
ADA51-5022b
(1 320
6)
6)
4 bolts M8 4 bolts M8
2.
2.
Dimension Drawings
38 185 (7.28)
(1.5) 156 (6.14)
4 x M5
219 (8.62)
232 (9.13)
204 (8.03)
245 (9.65)
ADA51-5012c
174 54 (2.13)
(6.85)
c b c b
3
a
a
DA51-5014d
DA51-5051
Line commutating choke for frame size C Line commutating choke for frame sizes D and E
b
c
DA51-5052
Line commutating choke for inverter frame size F All dimensions are in mm (values in brackets are in inches)
Dimension Drawings
■ Output chokes
c b
for (max.)
DA51-5050
a b c kg
frame size C 245 185 80 5.6
(9.65) (7.28) (3.15)
3
3TC07-5ED0 E 248 270 209 88 200 24.9
(9.76) (10.63) (8.23) (3.46) (7.87)
DA51-5052
Output choke
for inverter frame sizes D, E and F
Dimension Drawings
DA51-5042a
Example:
Assembly of inverter, choke
and filter
If additional accessories
are required, they must be
mounted at the side.
4/12 Options
Description
■
allows maximum configura-
tion flexibility
Six programmable isolated
■ Line commutating chokes
■ Output chokes
■ Gland plates
■ BOP basic operator panel
cations. These also include
cranes and hoisting gear, ■ International Standards digital inputs for parameterizing an
high-bay warehouses, pro- ■ The MICROMASTER 440 ■ Two scalable analog inputs inverter
duction machines for food, inverter complies with the (0 V to 10 V, 0 mA to 20 mA) ■ AOP advanced operator
beverages and tobacco, requirements of the EU low- can also be used as a 7th/ panel with plain-text and
packaging machines etc.; i.e. voltage guideline; filtered 8th digital input multilingual display
applications which require the versions also comply with ■ Two programmable analog ■ Communications module
frequency inverter to have a the EU EMC guideline outputs (0 mA to 20 mA) – PROFIBUS
higher functionality and ■ The MICROMASTER 440 ■ Three fully programmable – DeviceNet
dynamic response than usual. inverter has the > marking relay outputs ■ Pulse encoder evaluation
The inverter is especially ■ u and cu listed (30 V DC/5 A, resistive module
250 V AC/2 A, inductive)
characterized by its customer- ✔
■ c-tick ● ■ PC connection kits
oriented performance and ■ Silent motor operation is
Note: selectable when using high ■ Assembly kits for mounting
ease of use. Its large supply- the operator panels in the
voltage range enables it to be ■ See Appendix for stan- switching frequencies
(observe derating if neces- control cabinet doors
used all over the world. dards.
sary) ■ PC commissioning tools,
■ Complete inverter and running under Windows 95/
motor protection. 98 and NT/2000.
Description
■
Fast current limit (FCL) for
trip free operation
Fast, repeatable digital
input response time
and 1.1 x rated output
current (i.e. 110 % over-
load capability) for 59 s,
cycle time 300 s
4
■ Fine speed adjustment
using two high resolution
10-bit analog inputs
■ Compound braking for
rapid controlled braking
■ Integral brake chopper
(only for 0.12 kW to 75 kW
inverters)
■ Four skip frequencies
■ Removable “Y” capacitor
for use on IT mains supplies
(with non-grounded mains
supplies, the “Y” capacitor
must be removed, and an
output choke installed).
Circuit Diagrams
2 0 0 to 2 4 0 V 1 /3 A C
I F n 3 8 0 to 4 8 0 V 3 A C
5 0 0 to 6 0 0 V 3 A C
P E
O J o g P
F S 1
+ 1 0 V B O P P E F o r a d d itio n a l d ig ita l in p u ts
1 L , N (D IN 7 , D IN 8 ) e x te rn a l
S e r ia l (L 1 , L 2 )
P ro to c o l c o n n e c tio n s s h o u ld b e m a d e :
0 V o r
2
A IN 1 + L 1 , L 2 , L 3
- > 4 ., 7 k 9 A 1 1
3
A IN 1 - D
2 2
4
3 1 0
A IN 2 + A
1 0 4 1 1
D D IN 7 D IN 8
A IN 2 -
1 1
N o te s :
D IN 1 W h e n a n a n a lo g in p u t is
5 c o n fig u re d a s a d ig ita l in p u t
D IN 2 th e th re s h o ld v a lu e s a r e a s
fo llo w s :
6 A C
D IN 3 1 .7 5 V D C = o ff
O p to is o la tio n
3 .7 V D C = o n
7
D C A IN 1 : 0 V to 1 0 V , 0 m A to 2 0 m A
D IN 4
a n d -1 0 V to + 1 0 V
8 A IN 2 : 0 V to 1 0 V
D IN 5 D C /R + a n d 0 m A to 2 0 m A
1 6 F a c to ry
D IN 6 fitte d
1 7 lin k
B + /D C +
P N P O u tp u t + 2 4 V
( is o la te d )
o r 9 B r a k in g
N P N O u tp u t 0 V r e s is to r
( is o la te d )
2 8 B -
P T C A
A
M o to r 1 4 9 0 k W t o 2 0 0 k W in v e r t e r s d o n 't
P T C /K T Y P T C B D - h a v e a n in te g r a te d b r a k in g c h o p p e r
D C
4 0 - 2 0 m A ,
m a x . 5 0 0 9
A O U T 1 +
A O U T 1 -
1 2
1 5
A
D
C P U
D C
1 3 A C
A C
A O U T 2 +
0 - 2 0 m A , A D C
2 6
m a x . 5 0 0 9 A O U T 2 - D
2 7 D /L -
R L 1
C o n n e c tio n
R L 1 - C 6 0 H z fo r
2 0 N o t
R L 1 - B u s e d e x te rn a l
5 0 H z C /L +
1 9 b r a k in g
1 2
R L 1 - A D IP S w itc h e s u n it
O u tp u t re la y 1 8
R L 2 (o n C o n tro l B o a rd )
c o n ta c ts
2 5 0 V A C , m a x . 2 A R L 2 - C
( in d u c tiv e lo a d ) 2 2
3 0 V D C , m a x . 5 A R L 2 - B
2 1
( r e s is tiv e lo a d )
R L 3 A IN 1 A IN 2
0 - 2 0 m A
R L 3 - C
2 5 0 - 1 0 V
R L 3 - B
2 4 1 2 D C
R L 3 - A D IP S w itc h e s
2 3 (o n I/O B o a rd )
W h e n a c o m m u n ic a tio n s A C
m o d u le is c o n n e c te d , P +
2 9 R S 4 8 5
th e s e r ia l in te r fa c e
d o e s n 't w o rk . N -
3 0 P E U , V , W
A D A 5 1 -5 0 2 4 f
M
3 ~
Circuit Diagrams
Mains connections
View A
Motor connections
View A
AIN1 AIN2 RL1-A RL1-B RL1-C RL2-B RL2-C RL3-A RL3-B RL3-C
A DA51-5025
S1 S2
18 19 20 21 22 23 24 25
DIP Switches:
0 mA to 20 mA
or Output relay contacts
0 V to 10 V
NPN *)
(DIN7) (DIN8)
+10 V 0V AIN1+ AIN1- DIN1 DIN2 DIN3 DIN4 +24 V AIN2+ AIN2-
1 2 3 18
4 5 6 7 8 9 10 11
PNP *)
Technical Data
4 0.12 – 75 kW
90 – 250 kW
Electromagnetic
without output choke max. 50 m (shielded), max. 100 m (unshielded)
with output choke max. 200 m (shielded), max. 300 m (unshielded)
without output choke max. 100 m (shielded), max. 150 m (unshielded)
with output choke in preparation
0.12 kW to 75 kW Optional EMC filters to EN 55 011, Class A or Class B (for frame sizes A, B, C),
compatibility Inverter with internal filter Class A available (frame sizes A, B, C, D, E, F)
Braking Resistance braking with DC braking, compound braking, integral brake chopper
(integral brake chopper only with 0.12 kW to 75 kW inverters)
Protection level IP 20
Temperature 0.12 kW to 75 kW –10 °C to +50 °C (CT)
range –10 °C to +40 °C (VT)
(without derating) 90 kW to 200 kW 0 °C to +40 °C
Storage temperature –40 °C to +70 °C
Humidity 95% (non-condensing)
Operational 0.12 kW to 75 kW up to 1000 m above sea level without derating
altitudes 90 kW to 200 kW up to 2000 m above sea level without derating
Protection features for under-voltage, over-voltage, overload, earth faults, short circuits, stall prevention, locked motor,
motor over-temperature, inverter over-temperature, parameter PIN protection
Conformity with standards u, cu, >, c-tick ● ✔
> marking Conformity with EC low voltage directive 73/23/EC
filtered versions also with electromagnetic compatibility directive 89/336/EC
Dimensions and weights Frame size (FS) H x W x D, max. (mm) Weight, approx. (kg)
(without options) A 173 x 73 x 149 1.3
B 202 x 149 x 172 3.4
C 245 x 185 x 195 5.7
D 520 x 275 x 245 17
E 650 x 275 x 245 22
F without filter 850 x 350 x 320 56
F with filter 1150 x 350 x 320 75
FX 1555 x 330 x 360 110
GX 1875 x 330 x 560 190
Technical Data
■ Derating Data
Pulse frequency
Technical Data
1 0 0 1 0 0
R a te d o u tp u t c u rre n t
R a te d o u tp u t c u rre n t
% C T 8 5
8 0 8 0
V T %
6 0 6 0
5 0
4 0 4 0
2 0 2 0
0 0
-1 0 0 1 0 2 0 3 0 4 0 5 0 6 0 °C 7 0 0 1 0 2 0 3 0 4 0 4 5 °C 5 5
O p e r a tin g te m p e r a tu r e O p e r a tin g te m p e r a tu r e
100 100
Rated output current
% 85
80 80
%
60 60
40 40
20 20
0 0
0 1000 2000 3000 m 4000 0 1000 2000 3000 m 4000
Operational altitude Operational altitude
100 100
Mains voltage
Mains voltage
% %
80 80
77 77
60 60
40 40
20 20
0 0
0 1000 2000 3000 m 4000 0 1000 2000 3000 m 4000
Operational altitude Operational altitude
1) Additional conditions:
input current at nominal work-
ing point, applies to short-cir-
cuit voltage of mains supply Vk
³ 1 % referred to rated inverter
power and rated mains voltage
of 240 V or 400 V or 500 V.
Options
Options
Options
4
1.5 6SE6440-2UD21-5AA1 –
2.2 6SE6440-2UD22-2BA1 – – –
3.0 6SE6440-2UD23-0BA1 – – –
4.0 6SE6440-2UD24-0BA1 – – –
5.5 6SE6440-2UD25-5CA1 – – –
7.5 6SE6440-2UD27-5CA1 – – –
11.0 6SE6440-2UD31-1CA1 – – –
15.0 6SE6440-2UD31-5DA1 – – –
18.5 6SE6440-2UD31-8DA1 – – –
22 6SE6440-2UD32-2DA1 – – –
30 6SE6440-2UD33-0EA1 – – –
37 6SE6440-2UD33-7EA1 – – –
45 6SE6440-2UD34-5FA1 – – –
55 6SE6440-2UD35-5FA1 – – –
75 6SE6440-2UD37-5FA1 – – –
90 6SE6440-2UD38-8FA0 6SL3000-0BE32-5AA0 – –
110 6SE6440-2UD41-1FA0 6SL3000-0BE34-4AA0 – –
132 6SE6440-2UD41-3GA0 – –
160 6SE6440-2UD41-6GA0 – –
200 6SE6440-2UD42-0GA0 6SL3000-0BE36-0AA0 – –
500 V to 0.75 6SE6440-2UE17-5CA1 – – –
600 V 3 AC 1.5 6SE6440-2UE21-5CA1 – – –
2.2 6SE6440-2UE22-2CA1 – – –
4.0 6SE6440-2UE24-0CA1 – – –
5.5 6SE6440-2UE25-5CA1 – – –
7.5 6SE6440-2UE27-5CA1 – – –
11.0 6SE6440-2UE31-1CA1 – – –
15.0 6SE6440-2UE31-5DA1 – – –
18.5 6SE6440-2UE31-8DA1 – – –
22 6SE6440-2UE32-2DA1 – – –
30 6SE6440-2UE33-0EA1 – – –
37 6SE6440-2UE33-7EA1 – – –
45 6SE6440-2UE34-5FA1 – – –
55 6SE6440-2UE35-5FA1 – – –
75 6SE6440-2UE37-5FA1 – – –
Options
4
1.5 6SE6440-2UD21-5AA1 6SE6400-3CC00-6AD0
2.2 6SE6440-2UD22-2BA1 6SE6400-3CC01-0BD0 6SE6400-3TC01-0BD0 6SE6400-4BD12-0BA0
3.0 6SE6440-2UD23-0BA1
4.0 6SE6440-2UD24-0BA1 6SE6400-3CC01-4BD0
5.5 6SE6440-2UD25-5CA1 6SE6400-3CC02-2CD0 6SE6400-3TC03-2CD0 6SE6400-4BD16-5CA0
7.5 6SE6440-2UD27-5CA1
11.0 6SE6440-2UD31-1CA1 6SE6400-3CC03-5CD0
15.0 6SE6440-2UD31-5DA1 6SE6400-3CC04-4DD0 6SE6400-3TC05-4DD0 6SE6400-4BD21-2DA0
18.5 6SE6440-2UD31-8DA1 6SE6400-3TC03-8DD0
22 6SE6440-2UD32-2DA1 6SE6400-3CC05-2DD0 6SE6400-3TC05-4DD0
30 6SE6440-2UD33-0EA1 6SE6400-3CC08-3ED0 6SE6400-3TC08-0ED0 6SE6400-4BD22-2EA0
37 6SE6440-2UD33-7EA1 6SE6400-3TC07-5ED0
45 6SE6440-2UD34-5FA1 6SE6400-3CC11-2FD0 6SE6400-3TC14-5FD0 6SE6400-4BD24-0FA0
55 6SE6440-2UD35-5FA1 6SE6400-3TC15-4FD0
75 6SE6440-2UD37-5FA1 6SE6400-3CC11-7FD0 6SE6400-3TC14-5FD0
90 6SE6440-2UD38-8FA0 6SL3000-0CE32-3AA0 in preparation –
110 6SE6440-2UD41-1FA0 6SL3000-0CE32-8AA0 –
132 6SE6440-2UD41-3GA0 6SL3000-0CE33-3AA0 –
160 6SE6440-2UD41-6GA0 6SL3000-0CE35-1AA0 –
200 6SE6440-2UD42-0GA0 –
500 V to 0.75 6SE6440-2UE17-5CA1 – On request 6SE6400-4BE14-5CA0
600 V 3 AC 1.5 6SE6440-2UE21-5CA1 –
2.2 6SE6440-2UE22-2CA1 –
4.0 6SE6440-2UE24-0CA1 –
5.5 6SE6440-2UE25-5CA1 –
7.5 6SE6440-2UE27-5CA1 – 6SE6400-4BE16-5CA0
11.0 6SE6440-2UE31-1CA1 –
15.0 6SE6440-2UE31-5DA1 6SE6400-3CC04-4DD0 6SE6400-3TC02-2DE0 6SE6400-4BE21-3DA0
18.5 6SE6440-2UE31-8DA1 6SE6400-3TC02-7DE0
22 6SE6440-2UE32-2DA1 6SE6400-3TC03-2DE0
30 6SE6440-2UE33-0EA1 6SE6400-3CC08-3ED0 6SE6400-3TC05-2EE0 6SE6400-4BE21-8EA0
37 6SE6440-2UE33-7EA1
45 6SE6440-2UE34-5FA1 6SE6400-3CC11-2FD0 6SE6400-3TC06-2FE0 6SE6400-4BE24-2FA0
55 6SE6440-2UE35-5FA1 6SE6400-3TC08-8FE0
75 6SE6440-2UE37-5FA1
Options
4
1.5 6SE6440-2UD21-5AA1 3RV1021-1JA10
2.2 6SE6440-2UD22-2BA1 6SE6400-0GP00-0BA0 3NA3005 3RV1021-1KA10
3.0 6SE6440-2UD23-0BA1 3RV1021-4AA10
4.0 6SE6440-2UD24-0BA1 3NA3007 3RV1021-4BA10
5.5 6SE6440-2UD25-5CA1 6SE6400-0GP00-0CA0 3RV1031-4EA10
7.5 6SE6440-2UD27-5CA1 3NA3012 3RV1031-4FA10
11.0 6SE6440-2UD31-1CA1 3NA3014 3RV1031-4HA10
15.0 6SE6440-2UD31-5DA1 Integrated as standard 3NA3020 3NE1817-0 3RV1042-4KA10
18.5 6SE6440-2UD31-8DA1 3NA3022 3NE1818-0
22 6SE6440-2UD32-2DA1 3NA3024 3NE1820-0 3RV1042-4MA10
30 6SE6440-2UD33-0EA1 3NA3030 3NE1021-0 3VL1712- . DD33- . . . .
37 6SE6440-2UD33-7EA1 3NA3032 3NE1022-0 3VL1716- . DD33- . . . .
45 6SE6440-2UD34-5FA1 3NA3036 3NE1224-0 3VL3720- . DC36- . . . .
55 6SE6440-2UD35-5FA1 3NE1225-0 3VL3725- . DC36- . . . .
75 6SE6440-2UD37-5FA1 3NA3140 3VL4731- . DC36- . . . .
90 6SE6440-2UD38-8FA0 – 3NE1227-0 On request
110 6SE6440-2UD41-1FA0 – 3NE1230-0
132 6SE6440-2UD41-3GA0 – 3NE1332-0
160 6SE6440-2UD41-6GA0 – 3NE1333-0
200 6SE6440-2UD42-0GA0 – 3NE1435-0
500 V to 0.75 6SE6440-2UE17-5CA1 6SE6400-0GP00-0CA0 3NA3803-6 l 3RV1021-1DA10
600 V 3 AC 1.5 6SE6440-2UE21-5CA1 3RV1021-1GA10
2.2 6SE6440-2UE22-2CA1 3RV1021-1JA10
4.0 6SE6440-2UE24-0CA1 3RV1021-4AA10
5.5 6SE6440-2UE25-5CA1 3NA3805-6 3RV1021-4BA10
7.5 6SE6440-2UE27-5CA1 3NA3810-6 3RV1021-4DA10
11.0 6SE6440-2UE31-1CA1 3NA3812-6 3RV1031-4FA10
15.0 6SE6440-2UE31-5DA1 Integrated as standard 3NA3814-6 3NE1803-0 3RV1031-4HA10
18.5 6SE6440-2UE31-8DA1 3NA3820-6 3NE1817-0 3RV1042-4JA10
22 6SE6440-2UE32-2DA1 3NA3822-6 3NE1818-0 3RV1042-4KA10
30 6SE6440-2UE33-0EA1 3NA3824-6 3NE1820-0 3RV1042-4MA10
37 6SE6440-2UE33-7EA1 3VL1712- . DD33- . . . .
45 6SE6440-2UE34-5FA1 3NA3132-6 3NE1022-0 3VL1716- . DD33- . . . .
55 6SE6440-2UE35-5FA1 3VL3720- . DC36- . . . .
75 6SE6440-2UE37-5FA1 3NA3136-6 3NE1224-0 3VL3725- . DC36- . . . .
Options
Mains
operating
voltage
200 V to
240 V 1 AC
Rated
output
kW
0.12
Inverter
with internal filter
Class A
6SE6440-2AB11-2AA1
Order No. of the options
Brake resistor
6SE6400-4BC05-0AA0
Gland plate
6SE6400-0GP00-0AA0
4
0.25 6SE6440-2AB12-5AA1
0.37 6SE6440-2AB13-7AA1
0.55 6SE6440-2AB15-5AA1
0.75 6SE6440-2AB17-5AA1
1.1 6SE6440-2AB21-1BA1 6SE6400-4BC11-2BA0 6SE6400-0GP00-0BA0
1.5 6SE6440-2AB21-5BA1
2.2 6SE6440-2AB22-2BA1
3.0 6SE6440-2AB23-0CA1 6SE6400-4BC12-5CA0 6SE6400-0GP00-0CA0
200 V to 3.0 6SE6440-2AC23-0CA1 6SE6400-4BC12-5CA0 6SE6400-0GP00-0CA0
240 V 3 AC 4.0 6SE6440-2AC24-0CA1 6SE6400-4BC13-0CA0
5.5 6SE6440-2AC25-5CA1
380 V to 2.2 6SE6440-2AD22-2BA1 6SE6400-4BD12-0BA0 6SE6400-0GP00-0BA0
480 V 3 AC 3.0 6SE6440-2AD23-0BA1
4.0 6SE6440-2AD24-0BA1
5.5 6SE6440-2AD25-5CA1 6SE6400-4BD16-5CA0 6SE6400-0GP00-0CA0
7.5 6SE6440-2AD27-5CA1
11.0 6SE6440-2AD31-1CA1
15.0 6SE6440-2AD31-5DA1 6SE6400-4BD21-2DA0 Integrated as standard
18.5 6SE6440-2AD31-8DA1
22 6SE6440-2AD32-2DA1
30 6SE6440-2AD33-0EA1 6SE6400-4BD22-2EA0
37 6SE6440-2AD33-7EA1
45 6SE6440-2AD34-5FA1 6SE6400-4BD24-0FA0
55 6SE6440-2AD35-5FA1
75 6SE6440-2AD37-5FA1
Options
4 75 6SE6440-2AD37-5FA1 3NA3140
l Use in America
requires u-listed
fuses such as e.g.
3VL4731- . DC36- . . . .
Options
Options
■ Documentation
Type of documentation Language Order No.
Docu-Pack, Multilanguage 6SE6400-5AD00-1AP0
supplied with each inverter,
containing CD-ROM 1) and
Getting Started Guide 2)
(paper version)
Operating instruction2) German 6SE6400-5AW00-0AP0
(paper version) English 6SE6400-5AW00-0BP0
French 6SE6400-5AW00-0DP0
Italian 6SE6400-5AW00-0CP0
Spanish 6SE6400-5AW00-0EP0
Parameter list 2) German 6SE6400-5BB00-0AP0
(paper version) English 6SE6400-5BB00-0BP0
French 6SE6400-5BB00-0DP0
Italian 6SE6400-5BB00-0CP0
Spanish 6SE6400-5BB00-0EP0
Dimension Drawings
(2.28)
58
173 (6.81)
160 (6.29)
DIN Rail ADA51-5000e
ADA51-5007c
147 (5.79)
195 (7.68)
Fixing with
2 bolts M4, 2 nuts M4,
(5 149
2 washers M4
7)
.8
73
or snap on to the DIN rail
(2.87) Tightening torque with
washers fitted: 2.5 Nm Inverter frame size A
Inverter frame size A
Ventilation clearance required with gland plate
at top and bottom: 100 mm
Drill pattern
174 (6.85)
ADA51-5008b
202 (7,95)
258 (10.16)
ADA51-5001d
138 (5.43)
(6 172
Fixing with
7)
4
.7
Drill pattern
204 (8.03)
ADA51-5009b
245 (9.65)
309 (12.16)
ADA51-5002d
174 (6.85)
Fixing with
(7 195
8)
4 washers M5
185 (7.28) Tightening torque with
Inverter frame size C washers fitted: 3.0 Nm
Ventilation clearance required
at top and bottom: 100 mm Inverter frame size C
with gland plate
With a communications module, the mounting depth increases by 23 mm (0.91 Inches).
If a pulse encoder evaluation module is additionally inserted, the mounting depth is
increased by a further 23 mm (0.91 Inches). All dimensions are in mm (values in brackets are in inches)
Dimension Drawings
Drill pattern
Drill pattern
616.4 (24.27)
650 (25.59)
520 (20.47)
486 (19.13)
ADA51-5020b
ADA51-5021b
5)
5)
810 (31.89)
ADA51-5023b
ADA51-5022b
(1 320
6)
6)
2.
Dimension Drawings
Drill pattern
Fixing with
4 bolts M8
275 4 nuts M8
(10.83) 4 washers M8
for connection to DIN rail
Tightening torque with
washers fitted: 13 Nm + 30 %
Ventilation clearance required
top: 250 mm
bottom:150 mm
1475 (58.07)
1555 (61.22)
front: 100 mm
Power connection
Max. cable cross-section mm2 1 x 185 or 2 x 120
AWG 1 x 350 or 2 x 4/0
Barrel lug to DIN 46 235 10 mm
ADA51-5044a
225
(8.86)
(1 360
2)
4.
330 (13)
Inverter frame size FX
Drill pattern
Fixing with
4 bolts M8
275 4 nuts M8
4
(10.83) 4 washers M8
for connection to DIN rail
Tightening torque with
washers fitted: 13 Nm + 30 %
Ventilation clearance required
top: 250 mm
bottom:150 mm
front: 100 mm
Power connection
Max. cable cross-section mm2 2 x 240
1800 (70.87)
1875 (73.82)
AWG 2 x 400
Barrel lug to DIN 46 235 10 mm
ADA51-5043a
225
(8.86)
(2 560
5)
2.
330 (13)
Inverter frame size GX All dimensions are in mm (values in brackets are in inches)
Dimension Drawings
■ Filters
38 185 (7.28)
(1.5) 156 (6.14)
24 149 (5.87)
73 (2.87)
23.5 (0.94) 120 (4.72)
(0.93) 56 (2.2)
4 x M5
4 x M4
219 (8.62)
232 (9.13)
2 x M4
187 (7.36)
200 (7.87)
204 (8.03)
245 (9.65)
174 (6.85)
187 (7.36)
213 (8.39)
174 (6.85)
200 (7.87)
160 (6.3)
ADA51-5010e
ADA51-5011c
ADA51-5012c
42.5 (1.67) 49.5 (1.95)
138 174 54 (2.13)
(5.43) (6.85)
Filter for frame size A for frame size B for frame size C
Dimension Drawings
a
a
DA51-5013e
DA51-5014d
frame size B 213 150 50 1.3
(8.39) (5.91) (1.97)
frame size C 245 185 50 2.3
(9.65) (7.28) (1.97)
Line commutating choke for frame size A for frame sizes B and C
c b
DA51-5051
b
c
Dimension Drawings
■ Output chokes
c b
c b
a
a
DA51-5049
DA51-5050
3TCD1-0BD0 213 150 70 3.4
(8.39) (5.91) (2.76)
3TC03-2DC0 245 185 80 5.6
(9.65) (7.28) (3.15)
Output choke
6SE6400-3TC00-4AD1 6SE6400-3TC01-0BD0
6SE6400-3TC03-1CD0
Figure 1 Figure 2 b
c
c b
DA51-5052
DA51-5054
a
a
n1
n1 /n3
n2 /n4 n2
4
frame size to DIN 41 308 to DIN EN 60 852-4
(FS) a b c n1 n2 n3 n4 kg
1
3TC02-2DE0 D 1 122 124 73 42 ) 53 112 1.2
(4.80) (4.88) (2.87) (1.65) (2.09) (4.41)
3TC02-7DE0 D 1 139 148 78 49 90 58 136 2.5
(5.47) (5.83) (3.07) (1.93) (3.54) (2.28) (5.35)
1
3TC02-8DC0 D 1 122 124 73 42 ) 53 112 1.3
(4.80) (4.88) (2.87) (1.65) (2.09) (4.41)
3TC03-2DE0 D 2 210 225 179 76 176 – – 16.0
(8.27) (8.86) (7.05) (2.99) (6.93)
3TC03-8DD0 D 2 210 225 179 76 176 – – 16.1
(8.27) (8.86) (7.05) (2.99) (6.93)
3TC05-2EE0 E 1 159 178 73 49 113 53 166 3.3
(6.26) (7.01) (2.87) (1.93) (4.45) (2.09) (6.54)
3TC05-4DD0 D 2 210 225 150 76 176 – – 10.7
(8.27) (8.86) (5.91) (2.99) (6.93)
3TC06-2FE0 F 2 269 300 220 100 224 – – 33.9
(10.59) (11.81) (8.66) (3.94) (8.82)
3TC07-5ED0 E 2 248 270 209 88 200 – – 24.9
(9.76) (10.63) (8.23) (3.46) (7.87)
3TC08-0ED0 E 2 210 225 150 76 176 – – 10.4
(8.27) (8.86) (5.91) (2.99) (6.93)
3TC08-8FE0 F 2 321 350 288 120 264 – – 51.5
(12.64) (13.78) (11.34) (4.72) (10.39)
3TC14-5FD0 F 2 321 350 288 120 264 – – 51.5
(12.64) (13.78) (11.34) (4.72) (10.39)
3TC15-4FD0 F 2 210 225 150 76 176 – – 11.2
(8.27) (8.86) (5.91) (2.99) (6.93)
1) Mounting slot in center of foot.
Output choke for inverter frame sizes D, E and F All dimensions are in mm (values in brackets are in inches)
Dimension Drawings
■ Brake resistors
Figure 1 Figure 2 Figure 3 n4
b
b c b
c
n4 n4
n3
DA51-5056
a
n3
a
n3
a
DA51-5055a
DA51-5069
n1 c0
c1
n2
4BC21-2EA0
4BC22-5FA0
D
F
3
3
515
(20.28)
645
(25.39)
650
270
(10.63)
270
(10.63)
400
175
(6.89)
175
(6.89)
315
210
(8.27)
210
(8.27)
382
242
(9.53)
242
(9.53)
382
195
(7.68)
195
(7.68)
335
205
(8.07)
205
(8.07)
270
350
480
315
(13.78) (12.40)
315
(18.90) (12.40)
510 435
7.4
10.6
16.7
4
(25.59) (15.75) (12.40) (15.04) (15.04) (13.19) (10.63) (20.08) (17.13)
4BD11-0AA0 A 1 230 72 43.5 – – – – 217 56 1.0
(9.06) (2.83) (1.71) (8.54) (2.20)
4BD12-0BA0 B 2 239 149 43.5 – – – – 226 138 1.6
(9.41) (5.87) (1.71) (8.90) (5.43)
4BD16-5CA0 C 3 285 185 150 185 217 170 145 200 230 3.8
(11.22) (7.28) (5.91) (7.28) (8.54) (6.69) (5.71) (7.87) (9.06)
4BD21-2DA0 D 3 515 270 175 210 242 195 205 350 315 7.4
(20.28) (10.63) (6.89) (8.27) (9.53) (7.68) (8.07) (13.78) (12.40)
4BD22-2EA0 E 3 645 270 175 210 242 195 205 480 315 10.6
(25.39) (10.63) (6.89) (8.27) (9.53) (7.68) (8.07) (18.90) (12.40)
4BD24-0FA0 F 3 650 400 315 382 382 335 270 510 435 16.7
(25.59) (15.75) (12.40) (15.04) (15.04) (13.19) (10.63) (20.08) (17.13)
4BE14-5CA0 C 3 285 185 150 185 217 170 145 200 230 3.8
(11.22) (7.28) (5.91) (7.28) (8.54) (6.69) (5.71) (7.87) (9.06)
4BE16-5CA0 C 3 285 185 150 185 217 170 145 200 230 3.8
(11.22) (7.28) (5.91) (7.28) (8.54) (6.69) (5.71) (7.87) (9.06)
4BE21-3DA0 D 3 515 270 175 210 242 195 205 350 315 7.4
(20.28) (10.63) (6.89) (8.27) (9.53) (7.68) (8.07) (13.78) (12.40)
4BE21-8EA0 E 3 645 270 175 210 242 195 205 480 315 10.6
(25.39) (10.63) (6.89) (8.27) (9.53) (7.68) (8.07) (18.90) (12.40)
4BE24-2FA0 F 3 650 400 315 382 382 335 270 510 435 16.7
(25.59) (15.75) (12.40) (15.04) (15.04) (13.19) (10.63) (20.08) (17.13)
Brake resistors for inverter frame sizes A to F All dimensions are in mm (values in brackets are in inches)
Dimension Drawings
DA51-5016b
Example:
Assembly of inverter, choke
and filter
If additional accessories
are required, they must be
mounted at the side.
Appendix
Appendix
#)*&*+,$ -%
-./0&1/)0+$1+2$!3)4*,
#/1+2132$!3)4*,
1#,2"0,2#,'!"#&3(#,4"&56
789:6;<&=#>,0?"0
@)(!&(!"&>-',()-0+&,+&>)+("A&)0&(!"&,00"B
*-#&(!"&+'-/"
7"+)?0&C&A"D">-/."0(E&/#-A2'()-0E&+,>"+&C&.,#F"()0?&,0A&+"#D)'"&-*
+(,0A,#A&A#)D"+&,0A&'2+(-."#8+/"')*)'&A"+)?0
!,+&)./>"."0("A&,0A&.,)0(,)0+&,
!:;$<;$:#=$>??@$A$B???
7"'".$"#&J666&"A)()-0
K!)+&'"#()*)',("&)+&D,>)A&20()> J66;8658:J
L"#()*)',("&M"?)+(#,()-0&N-OI 666P;Q&RS
1#,0F*2#(&,.&S,)0E&T"#>)0 J66J8658:P
7#O8U0?O&VO&W"(#)'F 7)/>O8U0?O&3O&X")0>-(!
SGNGYUNY& 7UM=LKZM3
!"#$%&'($!*./,CD*$%*,*55,CD1E/$F.3$G*3/)E)F)*3.+8$40+$71+18*&*+/,6,/*&*+
78<6[PP& 1#,0F*2#(& ,.& S,)0E& G2?2+(83'!,0\83(#,4"& J:
78:6Q5Q& T"#>)0E& T2#??#,*"0+(#,4"& <
!"#$%&'"(
)**("+,$,"(#-.%
/0$
!"#$%&$'($)'$''
!"#$%&$'($)'$*'
Appendix
A
They are not envisaged for
including special test proce- unlimited sale or as “General even significantly exceed
dure. availability” for users. the requirements of
At this point it is necessary EN 61 800-3/A11.
to exactly differentiate
between the frequency
inverter and the PDS. A PDS
can certainly be envisaged
by the vendor for general
availability, and the stan-
dard must be applied
accordingly. On the other
hand, the components used
in the PDS may possibly not
be for “General availability”.
Appendix
Electromagnetic
Compatibility
No impermissible electromag- The table below lists the mea- The inverters were installed
netic irradiation occurs if the sured results for emissions of according to the guidelines
installation guidelines specific and immunity to interference with shielded motor cables
to the product are correctly for MICROMASTER. and shielded control cables.
observed.
UL Listing
u and cu- listed power conversion
equipment type 5B33 in accordance with UL508C.
For use in pollution degree 2 environment.
Appendix
■ Demonstration Case
With the MICROMASTER 420 • 2 inverters
and 440 demonstration case, (MICROMASTER 420 and
one of these inverters can be MICROMASTER 440)
selected using a switch.
• Asynchronous motor 1LA7
The inverters are equipped from Siemens
with status display panels
• Precise, mechanical brake
(SDP). A BOP, AOP or other
for demonstration of torque
options must be ordered
control
separately.
• Double voltage range (90 V
The demonstration case has
to 130 V and 190 V to 265 V)
the following features:
• Extremely rugged metal
case, particularly suitable
for traveling.
A
SIDEMO demonstration case Order No. Weight, approx.
kg
Appendix
■ Training Center
Siemens A&D Training Cen- Headquarters:
ters are located worldwide,
Siemens AG
and offer the courses listed
Automation and Drives
below for MICROMASTER.
Training Center
Individual course contents, or
P.O. Box 48 48
training on site at customers,
D-90327 Nuremberg
can also be carried out.
Germany
Contact partner:
E-mail:
Every A&D Information and A&D.Kursbuero@nbgm.
Training Center in the regions siemens.de
and the regional companies Phone:
in Germany: +49 (0) 9 11-8 95-32 00
Tel.: +49 (0) 911-895 32 02 Fax:
+49 (0) 9 11-8 95-32 75
■ Training Courses
MICROMASTER 4 • Use of special functions • Commissioning of the Computer based Training
servicing, commissioning such as flying restart, DC MICROMASTER inverter on (CBT) and Web based
brakes the PROFIBUS-DP Training (WBT)
SD-MM4 (2 days)
• Warnings and fault signals • Transmission of process Commissioning is carried out
This course is aimed at
data and parameter values in interactive mode using the
commissioning and servicing • Practical exercises using
(protocol, PNO profile) MICROMASTER 420 fre-
engineers for the the field-proven demonstra-
quency inverter. In particular,
MICROMASTER 4 drives. It tion cases. • PROFIBUS-DP with Motion
handling of the parameter key-
covers proper utilization of the Control expansion (lateral
board is practically identical to
MICROMASTER 440 inverter MICROMASTER 4 communication, equidis-
the original. The training time
functionality, as well as that of communication tance, clock synchroniza-
is 3 to 4 hours depending on
the MICROMASTER 420 tion)
SD-MM4-COM (2 days) the level of knowledge.
inverter. This course is also
• Block library
suitable for beginners, since it This course is aimed at Contents:
can be adapted to provide commissioning and servicing • Drive ES SIMATIC
• Asynchronous motors con-
more in-depth knowledge if engineers working with the
• Fault diagnostics of the drive nected to power supply and
required. MICROMASTER 4 on the
Course targets/contents:
• Fundamentals of asynchro-
nous motors
PROFIBUS-DP. Knowledge of
MICROMASTER and SIMATIC
S7 are prerequisites.
via the bus system
• Practical exercises on the
MICROMASTER 440
demonstration cases and the
inverter
• Overview of
MICROMASTER inverter
A
It imparts knowledge on the • Electrical installation
SIMATIC S7 demonstration
• Fundamentals of inverters concept of Totally Integrated
cases with CPU 315-2 DP. • Parameter input, structure of
Automation (TIA).
• Programming using BOP, parameter set
Tip:
AOP Course targets/contents:
The course sometimes • Rating plate of motor
• PC programs: • Fundamentals of PROFI- directly follows the SD-MM4
• Simple commissioning
DriveMonitor/STARTER BUS-DP with emphasis on course. Participants need
drive technology then only travel once. • Assignment of different
• Commissioning using V/f
functions to the terminals.
characteristic and vector • Design of the PROFIBUS-DP Note:
control bus system This course handles the
DriveES SIMATIC block
• Optional programming of • Configuration of a You can find further informa-
library. The SD-MD-COM
input and output terminals PROFIBUS-DP network in tion in the Catalog ITC or at
course provides comprehen-
Step 7 http://www.sitrain.com.
sive information on alterna-
tives such as loading/transfer
commands, system functions,
DVA-S7 blocks.
Appendix
■ Overview of Motors
Siemens motors are an ideal The table provides an over- In addition to the motors listed Catalogs M 11 and M 15
supplement to the view of the most common in the table, explosion-proof contain the complete range of
MICROMASTER inverters. types of motors from Siemens. motors, marine motors and products with ordering data,
combustion gas motors are technical details and explana-
also available. tions.
Appendix
Appendix
Appendix
Appendix
Appendix
A
AG in the Internet. Here you
For example, powerful search
have access to a huge range
functions make it easy to find
of products presented in
the required products, which
electronic catalogs in an
can be immediately checked
informative and attractive way.
for availability. Customer-
Data transfer via EDIFACT specific discounts and prepa-
allows the whole procedure ration of quotes can be carried
from selection through order- out online as well as order
ing to tracking of the order to tracking and tracing.
be carried out online via the
Please visit the A&D Mall
Internet.
on the Internet under:
http://www.siemens.com/
automation/mall
Appendix
■ Online Support
Our Online Support guaran- • FAQs, tips & tricks, down- http://www.siemens.com/
tees quick and efficient assis- loads and news automation/service&support
tance – around the clock,
• Free manuals
worldwide and in five
languages. • Useful programs and soft-
ware
The Online Support offers all
technical information:
■ Field Service
Your system is installed and Thanks to our comprehensive Tel.: 0180 50 50 444
now you need quick on-site service network, we are able
Of course we offer also
help. We have the specialists to realize short response times
service contracts customized
with the know-how you – with competence, reliability,
to your requirements. Your
require, worldwide and at and speed.
Siemens Office is always at
hand.
You can request an expert in your disposal.
Germany 24 hours/day and
365 days/year.
■ Technical Support
• Competent, qualified and • in the United States Our network of dependencies
experienced specialists Tel.: +1 423 461-2522 in Germany, the U.S. and
offer teleservice and video Fax: +1 423 461 2231 Singapore offers support
conferencing for specific E-mail: simatic.hotline@ around the clock according to
problems. sea.siemens.com the “follow the sun” principle
• FreeContact – the way to the via FastContact – the fast way
• in Asia to the Technical Support:
free Technical Support.
Tel.: +65 740-7000 • Return call within two hours
• in Europe (headquarter) Fax: +65 740 7001
Technical advice for imple- guaranteed
Tel.: +49 (0)180 50 50 222 E-mail:
mentation of products, sys- Fax: +49 (0)180 50 50 223 simatic@singnet.com.sg • around the clock
tems and solutions in automa- E-mail: • payment with SIMATIC card
tion and drive technology is techsupport@ad.siemens.de Tel.: +49 (0)911 895 7777
provided in German and
Fax: +49 (0)911 895 7001
English.
Appendix
■ Subject Index
MICROMASTER MICROMASTER
A
Filter (option) 1/9 2/11 3/11 4/14 Start-up software 1/9 2/10 3/9 4/13
Fuses (option) 1/9 2/13 3/10 4/16 Support A/14 A/14 A/14 A/14
G T
General circuit diagram 1/4 2/4 3/4 4/4 Technical data (inverter) 1/6 2/6 3/6 4/6
Getting Started Guide 1/9 2/15 3/13 4/20 Technical data (options) - 2/14 3/12 4/19
Gland plates (option) - 2/13 3/10 4/16 Terminal connection diagram 1/5 2/5 3/5 4/5
Training center A/7 A/7 A/7 A/7
I
Training courses A/7 A/7 A/7 A/7
Installation height (derating) 1/7 2/7 3/7 4/8
International standards 1/2 2/2 3/2 4/2 U
Internet (online services) A/13 A/13 A/13 A/13 UL certification A/5 A/5 A/5 A/5
ISO 9001 certificate A/3 A/3 A/3 A/3 V
L Variant dependent options 1/9 2/11 3/10 4/14
Line commutating chokes (option) 1/9 2/12 3/10 4/15 Variant independent options 1/9 2/14 3/12 4/19
Appendix
6SE6410-2BB.. 1/7 - - -
6SE6410-2UA.. 1/7 - - -
6SE6410-2UB.. 1/7 - - -
6SE6420-2AB.. - 2/8 - -
A 6SE6420-2AC..
6SE6420-2AD..
6SE6420-2UC..
6SE6420-2UD..
-
-
-
-
2/8
2/8
2/8
2/8
-
-
-
-
-
-
-
-
6SE6430-2AD.. - - 3/8 -
6SE6430-2UD.. - - 3/8 -
6SE6440-2AB.. - - - 4/11
6SE6440-2AC.. - - - 4/11
6SE6440-2AD.. - - - 4/11
6SE6440-2UC.. - - - 4/9
6SE6440-2UD.. - - - 4/9
6SE6440-2UE.. - - - 4/10
6SL3000-0BE3. - - - 4/14
6SL3000-0CE3. - - - 4/15
Appendix
Appendix
A
Responsible for
Technical contents:
Siemens AG, A&D SD SM, Erlangen
General editing:
Siemens AG, A&D PT 5, Erlangen
Siemens AG
Automation & Drives
Standard Drives
Postfach 32 69
D-91050 Erlangen
Germany
www.siemens.com/micromaster