Académique Documents
Professionnel Documents
Culture Documents
Content
1. Introduction _______________________________________________________________4
1.1 Applications _________________________________________________________________ 4
1.2 Functional Components ______________________________________________________ 4
1.3 Interface _____________________________________________________________________ 4
1.4 LED _________________________________________________________________________ 5
1.5 Certifications ________________________________________________________________ 7
1.6 Standard Compliance_________________________________________________________ 7
1.7 Working Environment ________________________________________________________ 8
1.8 System Requirements ________________________________________________________ 8
1.9 Safety _______________________________________________________________________ 8
2. ONT Configuration ________________________________________________________9
2.1 ONU Login Preparation _______________________________________________________ 9
2.2 Login ONU___________________________________________________________________ 9
2.3 Introduction to Configuration Pages __________________________________________ 10
2.4 Status ______________________________________________________________________ 10
2.4.1 Device Information_______________________________________________________________ 10
2.4.2 LAN Status ______________________________________________________________________ 11
2.4.3 WAN Status _____________________________________________________________________ 11
2.5 Network ____________________________________________________________________ 12
2.5.1 LAN ____________________________________________________________________________ 12
2.5.2 WAN ____________________________________________________________________________ 13
2.5.3 WiFi ____________________________________________________________________________ 15
2.5.4 Routing _________________________________________________________________________ 18
2.5.5 DNS ____________________________________________________________________________ 19
2.5.6 TR-069 __________________________________________________________________________ 20
2.6 Security ____________________________________________________________________ 20
2.6.1 Firewall _________________________________________________________________________ 21
2.6.2 MAC Filter_______________________________________________________________________ 21
2.6.3 IP Filter _________________________________________________________________________ 22
2.6.4 DMZ and ALG ___________________________________________________________________ 24
2.7 Application _________________________________________________________________ 25
2.7.1 Port Forwarding _________________________________________________________________ 25
2.7.2 DDNS ___________________________________________________________________________ 26
2.7.3 NTP _____________________________________________________________________________ 27
2.7.4 USB Storage ____________________________________________________________________ 28
2.8 Maintain ____________________________________________________________________ 28
2.8.1 Password _______________________________________________________________________ 28
2.8.2 SLID Configuration ______________________________________________________________ 29
2.8.3 Backup and Restore _____________________________________________________________ 30
2.8.4 Firmware Upgrade _______________________________________________________________ 31
2.8.5 Reboot Device ___________________________________________________________________ 32
Version 1:2011.3 II
G-93RG1 GPON ONT User Manual
1. Introduction
G-93RG1 (Hereafter referred as ONU) is a highly integrated GPON access device. This device provides high
performance access services for end users, SOHO (Small Office Home Office) and small companies.
1.1 Applications
z SOHO
z Small Company
z Network TV
z 2 Audio Ports
z Supports Port Triggering Function. Opens the Specific Ports for Games and Applications Automatically.
z Simple Web based Display for System Configuration Status, and Connecting to the Configuration Pages
1.3 Interface
Version 1: 2011.3 4
G-93RG1 GPON ONT User Manual
See below table for the descriptions of ONT interfaces and buttons:
Interface Description
Power Switch Power switch, used to switch on/off the ONT power
1.4 LED
Version 1: 2011.3 5
G-93RG1 GPON ONT User Manual
OFF No Power
LINK Green
PON link is NOT OK
OFF
Blink
AUTH Green
“0.2 second on, 0.1 second off”, means WPS button was
Yellow Blink
pressed, accepting wireless card registration
Red Blink “Blink 5 times in 0.1 second frequency, then turn off for
0.5 second”, means there are 2 or more wireless cards
are registering at the same time
USB
Blink USB interface has data transmission
Green
Version 1: 2011.3 6
G-93RG1 GPON ONT User Manual
VoIP Green
/LAN3 Green
/LAN4
LAN port is not connected to terminal device (i.e. PC, set-
OFF
top-box), or system power off
1.5 Certifications
FCC Class B
CE Mark
z Networks
z IEEE802.3
Version 1: 2011.3 7
G-93RG1 GPON ONT User Manual
z IEEE802.3u
z Memory:64MB or above
1.9 Safety
z Always use caution when handling live electrical connections.
z Ensure that the power source for the system is adequately rated to assure safe operation and provides
current overload protection.
z Do not allow anything to rest on the power cable, and do not place this product where people will stand
or walk on the power cable.
z To avoid electric shock of user which caused by over-voltage from PSTN, DO NOT connect the POTS
port on this unit directly to external PSTN line.
z This unit can only be used with the certified adaptor model inside the package, which complies with the
requirement of limited power source.
DANGER: Do not open the enclosure without permission and technical support, which is
dangerous and voids the warranty.
Version 1: 2011.3 8
G-93RG1 GPON ONT User Manual
2. ONT Configuration
2.1 ONU Login Preparation
Before accessing ONU, make sure the connection between PC and ONU is correct.
Step 1 Configure IP address, for example: 192.168.1.X ( 2~254 ) , mask 255.255.255.0, Gateway
192.168.1.1. For different ONU version, please make the configuration according to the actual version.
If PC can ping the ONU IP address, it means the connection between PC and ONU is correct.
Note:
When using Web GUI to configure ONU, don’t turn off the ONU power during the configuration. Otherwise the
ONU might be damaged.
Step 1 Open IE browser, enter http://192.168.1.1 (ONU default IP address) in the address bar
Step 2 Enter administrator user name and password in the login window.
Version 1: 2011.3 9
G-93RG1 GPON ONT User Manual
After login to ONU with administrator, you can query, configure and modify ONU setups. Some configuration
and modification might have effect only after restart of ONU.
2.4 Status
After successful login, the default page is “Status”. There are 3 second level selections in “Status” page, they
are ”Device Information”, “LAN Status”, “WAN Status”.
Version 1: 2011.3 10
G-93RG1 GPON ONT User Manual
For Wireless interface information, you can view the Wireless Status, Wireless Channel, SSID name, and
encryption method, etc.
For Ethernet Interfaces information, you can view the Ethernet IP information, MAC address, packet received
and transmitted information, etc
Version 1: 2011.3 11
G-93RG1 GPON ONT User Manual
2.5 Network
In “Network” page, there are 6 second level selections. They are “LAN”, “WAN”, “WiFi”, “Routing”, “DNS”, “TR-
069”.
2.5.1 LAN
LAN configuration is used to configure ONU maintenance address, and DHCP related parameters.
Version 1: 2011.3 12
G-93RG1 GPON ONT User Manual
Bind MAC Address Bind the specific MAC and IP address for DHCP
Bind IP Address Bind the specific MAC and IP address for DHCP
After the configurations are done, click “Save” button to save it. Restart the device to make the modification to
take effects.
2.5.2 WAN
WAN configuration is used to configure the WAN connection parameter, including WAN basic setup, and WAN
IP mode setup.
Version 1: 2011.3 13
G-93RG1 GPON ONT User Manual
Parameter Description
Enable/Disable Select or unselect this check box, to enable or disable this WAN connection.
Service There are 4 service types. They are VOIP/ TR069/ Internet/ others.
Enable VLAN Select this check box to enable VLAN feature. When selected, the below VLAN
ID setup, and 802.1p priority setup will be configurable. Otherwise they can not
be configured.
WAN IP Mode Used to select the method to get the WAN IP address. There are 3 options:
“PPPoE”, “DHCP”, and “Static IP”. If PPPoE is selected, it will be requested to
input username/password, and keep alive time. If Static IP is selected, it will be
requested to input the IP address, netmask and gateway address.
After the configurations are done, click “Save” button to save it. Restart the device to make the modification to
take effects.
Version 1: 2011.3 14
G-93RG1 GPON ONT User Manual
2.5.3 WiFi
WiFi configuration is used to configure the basic wireless network parameters. You can enable or disable
wireless function, setup SSID, setup encryption method and key. The basic and advance configuration, and
SSID setup are included in the same page.
Parameter Description
Version 1: 2011.3 15
G-93RG1 GPON ONT User Manual
Transmitting To set the percentage of transmitting power out of the maximum, there
Power are 4 options
Version 1: 2011.3 16
G-93RG1 GPON ONT User Manual
When PBC is selected, the following item PIN Code Number is not
available to be configured.
PIN Code To configure the PIN Code, it is only available when WPS is in PIN
Number mode.
WPS To initiate WPS process softly
Connect
button
Encrypt To select the Encryption mode of Wi-Fi, there are 4 options:
Mode
z When OPEN selected, no security is applied to Wi‐Fi, Wi‐Fi
configuration is finished here.
z When WEP selected, the following items will be showed and need
to be configured.
z When WPA/WPA2 Personal selected, the following items will be
showed and need to be configured.
z When WPA/WPA2 Enterprise selected, the following items will be
showed and need to be configured.
WEP To set the WEP working mode, there are 2 options:
Encryption
Mode
Version 1: 2011.3 17
G-93RG1 GPON ONT User Manual
encryption level.
WPA To select the WPA mode, there are 3 options:
Version
2.5.4 Routing
Routing configuration is used to configure the static routing parameters.
Parameter Description
Version 1: 2011.3 18
G-93RG1 GPON ONT User Manual
IPv4 Interface Select the WAN ports that this route uses
Add Button Click this button, to add a new static routing rule for above parameters.
After the configurations are done, click “Save” button to save it. Restart the device to make the modification to
take effects.
2.5.5 DNS
DNS configuration is used to configure the static DNS information
Parameter/Button Description
Version 1: 2011.3 19
G-93RG1 GPON ONT User Manual
2.5.6 TR-069
Manage remote ITMS server configuration.
Parameter/Button Description
Connect Request Username User name for ITMS Server to access ONU
2.6 Security
There are 4 second level selections in the “Security” page. They are “Firewall”, “MAC Filter”, “IP Filter” and
“DMZ and ALG”
Version 1: 2011.3 20
G-93RG1 GPON ONT User Manual
2.6.1 Firewall
In “Firewall” page, one can select firewall security level, and whether to enable protection for DoS attack.
Parameter Description
Select firewall level. Select “High” to block all the non-secure external
Security Level accessing. Select “Middle” or “Low” to allow external accessing for HTTP,
FTP, ICMP protocols. Suggest to set the level to “High”.
After the configurations are done, click “Save” button to save it.
Version 1: 2011.3 21
G-93RG1 GPON ONT User Manual
Parameter Description
Include Black List and White List. Black List means access
MAC Filter Mode denied for MACs that fit this filtering rule. White list means
access allowed for MACs that fit this filtering rule.
Including two options: deny, or accept. It’s used for the MACs
Default Policy
that can not meet all the filtering rules.
After the configurations are done, click “Save” button to save it.
2.6.3 IP Filter
In IP Filter page, one can add IP filtering rules.
Version 1: 2011.3 22
G-93RG1 GPON ONT User Manual
Parameter Description
Enable IP Filter Select or unselect this check box, to enable or disable IP filtering function.
Include two mode: Drop or Accept. Drop means blocking the IP flows that
Mode
meet the rule. Accept means allowing the IP flows that meet the rule
2) TCP
Protocol
3) UDP
4) TCP/UDP
5) ICMP
Version 1: 2011.3 23
G-93RG1 GPON ONT User Manual
Add Button Click this button, to add a new filtering rule for above configurations.
After the configurations are done, click “Save” button to save it.
ALG is Application Level Gateway. Its main function is to make necessary processing to the application
packets, e.g. for some special protocol, modify possible IP address or port information in the data of the
packets.
DMZ is De-Military Zone, which is a technique for ONU to forward all the packets to/from a specified internal
server. It allows to expose a intranet PC completely to the internet. Or it allows a dedicated IP address, to
communicate with internet user or server freely. It allows more applications to run on dedicated IP address,
and dedicated IP address can receive all connections and files.
Parameter Description
WAN Connection List Select to use DMZ function on which WAN link
Version 1: 2011.3 24
G-93RG1 GPON ONT User Manual
2.7 Application
In “Application” Page there are 4 second level selections. They are “Port Forwarding”, “DDNS”, “NTP” and
“USB Storage”.
Port forwarding makes the server running on ONU LAN side with private addresses (like Web server, FTP
server) can be accessed by external users from WAN port.
Parameter Description
WAN Port Input WAN side port range used by port forwarding
Version 1: 2011.3 25
G-93RG1 GPON ONT User Manual
Enable port mapping Enable or Disable mapping between WAN port and LAN port
WAN Link List (Virtual Host) Select which WAN link to use port forwarding setup
Add Button Create a new mapping rule using above port forwarding setup
2.7.2 DDNS
The Dynamic DNS service can map a dynamic IP address to a static domain name. By this domain name, the
gateway can easily be accessed from internet. Use DDNS configuration to configure the dynamic DNS service.
Parameter Description
WAN Connection List Select WAN Connection Link for DDNS setup
ISP Select available service provider for DDNS service. One can select “DynDNS.org”,
“gnudip”,“tzo”,“ods”
Version 1: 2011.3 26
G-93RG1 GPON ONT User Manual
After the configurations are done, click “Save” button to save it.
2.7.3 NTP
NTP management is used to setup the ONU time to be synchronized with network time server
Parameter Description
First Server Address Select first NTP server address. When select “Customer Setting”, user should
enter his own time server address.
Second Server Address Select second NTP server address. When select “Customer Setting”, user
should enter his own time server address.
After the configurations are done, click “Save” button to save it. Restart the device to make the modification to
take effects.
Version 1: 2011.3 27
G-93RG1 GPON ONT User Manual
Parameter Description
After the configurations are done, click “Save” button to save it.
2.8 Maintain
In “Maintain” page there are 8 second level selections. They are “Password”, “SLID Configuration”, “Backup
and Restore”, “Firmware Upgrade”, “Reboot device”, “Factory Default”, “Diagnose”
2.8.1 Password
By Password management, one can modify the user password.
Version 1: 2011.3 28
G-93RG1 GPON ONT User Manual
Parameter Description
Version 1: 2011.3 29
G-93RG1 GPON ONT User Manual
Parameter Description
SLID Mode Select the SLID mode. There are modes: ASCII and HEX.
Version 1: 2011.3 30
G-93RG1 GPON ONT User Manual
Parameter Description
Import Config File Click to restore system configuration from the file
Version 1: 2011.3 31
G-93RG1 GPON ONT User Manual
Parameter Description
Upgrade button Click to upgrade the ONT firmware from the file
Version 1: 2011.3 32
G-93RG1 GPON ONT User Manual
Parameter Description
Version 1: 2011.3 33
G-93RG1 GPON ONT User Manual
Parameter Description
2.8.7 Diagnose
Diagnose page includes ping / traceroute test and manual reporting functions,
Version 1: 2011.3 34
G-93RG1 GPON ONT User Manual
Parameter Description
Input IP address or
Input valid IP address or domain name for user test.
domain name
Show Result button Click this button to show the test result
A: Please check the connection between power adapter and the ONU. Please make sure power switch is
turned on.
A: Please check the cable connections between ONT and PC, or hub/switch. Please check the status of PC or
hub/switch, make sure they are running properly. Please check whether the network cable is broken.
A: Please check the connection between PON port and the fiber.
Version 1: 2011.3 35
G-93RG1 GPON ONT User Manual
A: Please follow below procedures to check the connection between PC and ONU:
Select “Start > Run”, input Ping command: Ping 192.168.1.1 (ONU IP address).
A: Insert a long pin to “Reset” hole, press and hold it for 5 seconds. ONU will reset automatically. After the
reset, ONU will be back to factory default.
4. Abbreviations
DDNS Dynamic Domain Name Server
Version 1: 2011.3 36
G-93RG1 GPON ONT User Manual
Version 1: 2011.3 37