Académique Documents
Professionnel Documents
Culture Documents
L O 2 – Development of plumbing
L O 3 – Plumbing at present day
L.O 4 - Safety
4.1 5S
4.2 Hazard and risk reduction management
4.3 Hand Signal for Construction industry
2 LESSON 2 – Introduction to Plumbing
8 hours L O 1 - DEFINITION OF PLUMBING AND OTHER TECHNOLOGICAL TERM
1.1 Plumbing- the art and science of installing pipes, fixtures and other apparatus. To convey and supply water in buildings, and to dispose
or discharge waste water, liquids, gases and other substances out of the building, in safe, orderly, healthy and sanitary ways to ensure
the health and sanitation of life and properties.
1.2 Dead end
1.3 Developed length
1.4 Diameter
1.5 Drainage system
1.6 Dry vent
1.7 Effective opening
1.8 Fixture
1.9 Ferrule
1.10 Flush meter
1.11 Grade
1.12 Group vent
1.13 Horizontal pipe
1.14 Liquid waste
1.15 Looped vent
1.16 Main sewer
1.17 Plumbing fixtures
1.18 Plumbing system
1.19 Relief vent
1.20 Riser
1.21 Rough-in
1.22 Public sewer
1.23 Sanitary sewer
1.24 Sanitary sewage
1.25 Stand pipe
1.26 Soil pipe
1.27 Stack
1.28 Stack vent
1.29 Trap
1.30 Trap seal
1.31 Vent stack
1.32 Vent system
1.33 Waste pipe
1.34 Water supply system
1.35 Wet vent
3-5 LESSON 3 – TOOLS, EQUIPMENT, SUPPLIES AND MATERIALS FOR PLUMBING
3 L.O 1 – Tools and Equipment for plumbing
8 hours 1.1 Electric drill
1.2 Pipe threader
1.3 Pipe cutter
1.4 Pipe reamer
1.5 Pipe vise
1.6 Pipe wrench
1.7 Adjustable wrench
1.8 Pull-push rule
1.9 Hacksaw with blade
1.10 Oil can
1.11 Steel brush
1.12 File
1.13 Tri square
1.14 Triangles (30 x 60, 45x45)
1.15 Plumbing mock-up
1.16 Spirit level
1.17 Plumb bob
1.18 Working steel table with pipe vise
1.19 Hammer
1.20 Cold chisel
ASSESSMENT METHOD :
Direct observation
Demonstration
Interview (Oral/Questionnaire)
Demonstration
Modular (Self-pace)
Film viewing
E-Learning
Industry Immersion
RESOURCES:
Prepared by:
PLUMBING INSTRUCTOR