Académique Documents
Professionnel Documents
Culture Documents
EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.
LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.
SCHEDULED INSPECTION DATE & TIME ACTUAL INSPECTION DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
SAUDI ARAMCO USE ONLY
SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
No.
32-SAMSS-011,
A1 Plugs are removed at all telltale holes.
Para. 9.3.14
StrengthTest Pressure shall be the test pressure (NEW) indicated in the
SAES-A-004,
A2 approved Safety Instruction Sheet.
Para. 6.4.5
(SAES-A-105, Attachment E-1)
Temperature of water during hydrostatic testing is maintained at not less 32-SAMSS-011,
A3
than 17°C throughout the testing cycle. Para. 9.3.12
Hydrostatic test pressure shall be held for a minimum of one hour per 25 32-SAMSS-011,
A4
mm of exchanger header thickness and in no case < than 1 hour. Para. 9.3.2
NOTE:
Strength testing preparation, pressurizing and inspection shall be performed per
SATIP-A-004-04.
REMARKS:
REFERENCE DOCUMENTS:
1. 32-SAMSS-011, Manufacture of Air-Cooled Heat Exchangers, (30 March 2005)
2. SAES-A-004, General Requirements for Pressure Testing, (30 June, 2003)
3. SAES-A-005, Safety Instruction Sheet, (31 December, 2001)
4. SATIP-E-007-02, Saudi Aramco Typical Inspection and test Plan for Air Cooled Heat Exchanger (Fin Fan Cooler), Rev. 01
5. SATIP-A-004-01, Saudi Aramco Typical Inspection and Test Plan for Pressure testing of Pressure Vessels, Rev. 01
Page 1 of 1