0 évaluation0% ont trouvé ce document utile (0 vote)
13 vues1 page
This document provides specifications for a custom cross-hole nut used to mount brackets and poles to the Ericsson sxk125 0245/1 pole. The nut is made of stainless steel 304, has a cylindrical height of 20mm±0.05mm and diameter of 19mm±0.05mm, with a center M10×1.5 threaded hole and upper and lower slots that are 2mm±0.02mm wide and 1.5mm±0.02mm deep at a 0-10 degree angle, with the upper and lower round faces requiring chamfering.
This document provides specifications for a custom cross-hole nut used to mount brackets and poles to the Ericsson sxk125 0245/1 pole. The nut is made of stainless steel 304, has a cylindrical height of 20mm±0.05mm and diameter of 19mm±0.05mm, with a center M10×1.5 threaded hole and upper and lower slots that are 2mm±0.02mm wide and 1.5mm±0.02mm deep at a 0-10 degree angle, with the upper and lower round faces requiring chamfering.
This document provides specifications for a custom cross-hole nut used to mount brackets and poles to the Ericsson sxk125 0245/1 pole. The nut is made of stainless steel 304, has a cylindrical height of 20mm±0.05mm and diameter of 19mm±0.05mm, with a center M10×1.5 threaded hole and upper and lower slots that are 2mm±0.02mm wide and 1.5mm±0.02mm deep at a 0-10 degree angle, with the upper and lower round faces requiring chamfering.