Académique Documents
Professionnel Documents
Culture Documents
i80 GNSS Receiver Quick Tour with LandStar7 (PDA Network Mode) 1
3. Click [Projects] icon in [Project] menu to choose the coordinate system of the project.
create or open a project.
5. Please type in the project name, the Select the Continent and Region according to
author of the project, which can be left blank, working area, then find proper Coordinate
the time zone of working region. System to use.
Then select the [Coordinate System] to After select Coordinate System, please click
i80 GNSS Receiver Quick Tour with LandStar7 (PDA Network Mode) 2
[Select] button to confirm.
Then selected coordinate system is available 6. Click [OK] button to finish the project
in the pre-define list, please click [Select] setting
button to confirm.
i80 GNSS Receiver Quick Tour with LandStar7 (PDA Network Mode) 3
7. Click [Config] tab then click [Connect]
icon to enter the connection interface.
Bluetooth connection
(1) Select [Manufacturer] as CHC, [Device
Type] as i80, [Connection Type] as Bluetooth,
[Antenna Type] as i80. Then click the
bluetooth icon on the right side to select the
bluetooth device.
i80 GNSS Receiver Quick Tour with LandStar7 (PDA Network Mode) 4
(3) Switch on the Bluetooth module by the (5) Then the device can be selected in the
top switch, click [Search for devices] to search bluetooth manager list.
the bluetooth device around. Then select the
target device in the list.
i80 GNSS Receiver Quick Tour with LandStar7 (PDA Network Mode) 5
(2) Switch on the WiFi module by the top
switch, click refresh button to search the hot
spot around. Then select the target device in
the list.
WiFi connection
(1) Select [Manufacturer] as CHC, [Device (3) Please click [Connect] to link to the hot
Type] as i80, [Connection Type] as WiFi, spot.
[Antenna Type] as i80. Then click the Wireless If the first time connection to this hot spot,
Lan icon on the right side to select the user may type in the password and the the
hot-spot. default password of i80 WiFi is 12345678
i80 GNSS Receiver Quick Tour with LandStar7 (PDA Network Mode) 6
(4) Then click the [Connect] button to build 9. Click [Config]-[Work Mode] to create or
the connection. accept a work mode.
i80 GNSS Receiver Quick Tour with LandStar7 (PDA Network Mode) 7
11. Please switch on RTK function, select the
work mode as Auto Rover, Datalink as PDA
Network, protocol as CORS and type in the
corresponding CORS IP and Port. Then click
the Download button to get the source table
i80 GNSS Receiver Quick Tour with LandStar7 (PDA Network Mode) 8
12. A name is necessary for a work mode, Then the interface will let user to check CORS
user can type in the name as their wish. information. Users can select source table or
switch other Ntrip account here.If all the
information is correct, please click [Ok]
button.
i80 GNSS Receiver Quick Tour with LandStar7 (PDA Network Mode) 9
17. Please click the Survey button to collect
the points.
i80 GNSS Receiver Quick Tour with LandStar7 (PDA Network Mode) 10