Académique Documents
Professionnel Documents
Culture Documents
, LTD
LMV358 LINEAR INTEGRATED CIRCUIT
DESCRIPTION
The UTC LMV358 are low voltage (2.7-5.5V) versions of the dual
DIP-8
and quad commodity op amps, LM358, which currently operate at
5-30V. The UTC LMV358 are the most cost effective solutions for
the applications where low voltage operation, space saving and low
price are needed. They offer specifications that meet or exceed the
familiar LM358. The UTC LMV358 have rail-to-rail output swing TSSOP-8
capability and the input common-mode voltage range includes
ground. They all exhibit excellent speed-power ratio, achieving
1MHz of bandwidth and 1V/µs of slew rate with low supply current. *Pb-free plating product number: LMV358L
The chips are built with National’s advanced submicron
silicon-gate BiCMOS process. The UTC LMV358 have bipolar input
and output stages for improved noise performance and higher output
current drive.
FEATURES
(For V1 =5V and V=0V. Typical Unless Otherwise Noted)
*Guaranteed 2.7V and 5V Performance
*No Crossover Distortion
*Space Saving Package
*Industrial Temp. Range
*Gain-Bandwidth Product
*Low Supply Current: 210µA
*Rail-to-Rail Output Swing
@10kΩ Load V1-10mV
V +65mV
*VCM -0.2V to V1 –0.8V
ORDERING INFORMATION
Order Number
Package Packing
Normal Lead Free Plating
LMV358-D08-T LMV358L-D08-T DIP-8 Tube
LMV358-P08-R LMV358L-P08-R TSSOP-8 Tape Reel
LMV358-P08-T LMV358L-P08-T TSSOP-8 Tube
LMV358-S08-R LMV358L-S08-R SOP-8 Tape Reel
LMV358-S08-T LMV358L-S08-T SOP-8 Tube
LMV358L-D08-T
(1)Packing Type (1) R: Tape Reel, T: Tube
(2)Package Type (2) D08: DIP-8, S08: SOP-8, P08: TSSOP-8
(3)Lead Plating (3) L: Lead Free Plating, Blank: Pb/Sn
www.unisonic.com.tw 1 of 12
Copyright © 2005 Unisonic Technologies Co., Ltd QW-R105-010,C
LMV358 LINEAR INTEGRATED CIRCUIT
PIN CONFIGURATIONS
OUT A 1 8 V+
IN A- 2 A 7 OUT B
IN A+ 3 B 6 IN B-
V- 4 5 IN B+
THERMAL DATA
PARAMETER SYMBOL RATINGS UNIT
Thermal Resistance (Note 8) θJA 235 °C/W
5V DC ELECTRICAL CHARACTERISTICS
Unless otherwise specified, all limits guaranteed for TJ =25°C, V1=5V, V=0V, VCM=2.0V, VOUT=V1/2 and RL>1MΩ.
Boldface limits apply at the temperature extremes.
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT
Input Offset Voltage VOS 7 1.7 9 mV
Input Offset Voltage Average Drift TCVos 5 µV/°C
Input Bias Current II(BIAS) 250 15 500 nA
Input Offset Current II(OFF) 50 5 150 nA
Common Mode Rejection Ratio CMRR 0V≦VCM≦4V 50 65 dB
2.7V≦V1≦5V
Power Supply Rejection Ratio PSRR 50 60 dB
VOUT=1V VCM=1V
0 -0.2 V
Input Common-Mode Voltage Range VCM For CMRR≧50dB
4.2 4 V
Large Signal Voltage Gain(Note 6) Av RL=2kΩ 10 100 15 V/mV
V+-400 V1-40 V1-300 mV
RL=2kΩ to 2.5V
300 120 400 mV
Output Swing VOUT
V+-200 V1-10 V1-100 mV
RL=10kΩ to 2.5V
180 65 280 mV
Sourcing, VOUT =0V 5 60 mA
Output Short Circuit Current IOUT
Sinking, VOUT =5V 10 160 mA
Supply Current ISS Both amplifiers 440 210 615 µA
TYPICAL CHARACTERISTICS
(Unless otherwise specified, VE=+5V, single supply. TA=25°C)
150
10 10
ISOURCT (mA)
1 1
0.1 0.1
0.01 0.01
0.001 0.001
0.001 0.01 0.1 1 10 0.001 0.01 0.1 1 10
+ +
Output Voltage Referenced V (V) Output Voltage Referenced V (V)
10 100
VSS = 2.7V 10
ISINK (mA)
ISINK (mA)
1
1
0.1
0.1
0.01
0.01
0.001 0.001
0.01 0.1 1 10 0.01 0.1 1 10
Output Voltage Referenced to GND (V) Output Voltage Referenced to GND (V)
TYPICAL CHARACTERISTICS(Cont.)
800 160
700 140
600 120
500 100
400 VSS = 2.7V 80
300 60 VSS = 2.7V
VSS = 5V
200 40
100 20
0 0
1k 10k 100k 1M -40 -20 0 20 40 60 80
Frequency (Hz) -30 -10 10 30 50 70 90
Temperature (℃)
80 80
Supply Voltage (mV)
VSS = 5V
70 70 Negative Swing
60 60
50 VSS = 2.7V 50
40 40
30 30
Poaltive Swing
20 20
10 10
0 0
-40 -20 0 20 40 60 80 2.5 3 3.5 4 4.5 5
-30 -10 10 30 50 70 90
Supply Voltage (V)
Temperature (℃)
VCM = VS/2
Input Voltage Noise (nV/√Hz)
65
0.5 VSS = 2.7V
60
0.4
55
50 0.3
VSS = 2.7V
45
0.2
VSS = 5V
40
35 0.1
30 0.0
10 100 1k 10k 10 100 1k 10k
Frequency (Hz) Frequency (Hz)
TYPICAL CHARACTERISTICS(Cont.)
VSS = 5V
0.5 VSS = 5V 140 RL = 5kΩ
0.3 120
0.2 110
0.1 100
0.0 90
10 100 1k 10k 100 1k 10k 100k
Frequency (Hz) Frequency (Hz)
50 65
45 60
40 55
35 VSS = 2.7V, +PSRR
50
30 VSS = 5V, -PSRR
25 V = 2.7V, -PSRR 45
SS
20 40
100 1k 10k 100k 1M 10 100 1k 10k 30k
Frequency (Hz) Frequency (Hz)
CMRR (dB)
60 60
55 55
50 50
45 45
40 40
35 35
30 30
-0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -0.5 0.00.51.0 1.52.02.5 3.03.54.0 4.55.0
Input Common Mode Voltage (V) Input Common Mode Voltage (V)
TYPICAL CHARACTERISTICS(Cont.)
AVOS (mV)
0.2 0.2
0.0 0.0
-0.2 -0.2
-0.4 -0.4
-0.6 -0.6
-0.8 -0.8
-1.0 -1.0
-1.5 -1 -0.5 0 0.5 1 1.5 -3 -2 -1 0 1 2 3
VCM (V) VCM (V)
RL = 600Ω R L = 600Ω
-100 -100
-50 -50
0 0
50 50
100 100 R L = 10kΩ
RL = 10kΩ
150 150
200 200
250 250
300 300
-1.5 -1 -0.5 0 0.5 1 1.5 -3 -2 -1 0 1 2 3
Output Voltage (V) Output Voltage (V)
Gain (dB)
40 60 40 R L = 100kΩ 60
30 RL = 100kΩ 45 30 45
20 20 RL = 2kΩ
RL = 2kΩ 30 GAIN 30
RL = 600Ω
10 RL = 600Ω GAIN 15 10 15
0 0 0 0
-10 -15 -10 -15
1k 10k 100k 1M 10M 1k 10k 100k 1M 10M
Frequency (Hz) Frequency (Hz)
TYPICAL CHARACTERISTICS(Cont.)
Gain (dB)
30 CL = 100pF 60
40 60
20 GAIN 40
30 45
25℃ 10 20
20 30
85℃ GAIN 0 CL = 0 0
10 15 -10 CL = 1000pF -20
-40℃ CL = 500pF
0 0 -20 -40
CL = 100pF
-10 -15 -30 -60
1k 10k 100k 1M 10M 10k 100k 1M 10M
Frequency (Hz) Frequency (Hz)
CL = 0
Sles Rate (V/μs)
40 80 1.2
30 1.1 Failing Edge
Gain (dB)
60
CL = 100pF
20 GAIN 40 1.0
10 20 0.9 Rising Edge
CL = 0
0 0 0.8
-10 CL = 1000pF -20 0.7
CL = 500pF -40
-20 0.6
CL = 100pF
-30 -60 0.5
10k 100k 1M 10M 2.5 3.0 3.5 4.0 4.5 5.0
Frequency (Hz) Supply Voltage (V)
(1V/div)
TYPICAL CHARACTERISTICS(Cont.)
(50mV/div)
(1V/div)
TYPICAL CHARACTERISTICS(Cont.)
(50mV/div)
RL CL RL CL
-2.5V -2.5V
1000 1000
VSS = ±2.5V
25% Overshoot AV = +1
RL = 1MΩ
100 V = ±2.5V 100 VOUT = 100mVPP
SS
AV = +1 25% Overshoot
RL = 2kΩ
VOUT = 100mVPP
10 10
-2 -1.5 -1 -0.5 0 0.5 1 1.5 -2 -1.5 -1 -0.5 0 0.5 1 1.5
TYPICAL CHARACTERISTICS(Cont.)
10 10
-2 -1.5 -1 -0.5 0 0.5 1 1.5 2 -2 -1.5 -1 -0.5 0 0.5 1 1.5 2
THD vs Frequency
5
0.5
THD (%)
0.005
20 100 1k 10k 100k
Frequency (Hz)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.