Académique Documents
Professionnel Documents
Culture Documents
PO No : A888/1101/728/PO‐2115 DATED.04.09.2018
OC No : 809043
Note: This is only indicative drawing. (Not in scale) All Dimensions are in mm
OTHER SPECIFICATION
5 Movement : SS 304
7 Accuracy : ± 1 % of F.S.
8 Max. Med. Temperature : 200°C
9 Tag no. : Refer Instrument List
NOTE:130% F.S. Over Pressure can not be witness during inspection due to requirement of stopper pin at both end
Note: This is only indicative drawing. (Not in scale) All Dimensions are in mm
11 SG Safety glass.
12 MP Micrometer Pointer
Option
13 ( As applicable ) CD5 NACE MR0103 Compliance certificate.
The pointer stops shall be provided at both ends of the scale to restrict the
14 : pointer motion beyond 5% above the maximum of scale and less than 5%
below the minimum of the scale.
OTHER SPECIFICATION
5 Movement : SS 304
7 Accuracy : ± 1 % of F.S.
NOTE:130% F.S. Over Pressure can not be witness during inspection due to requirement of stopper pin at both end.
Note: This is only indicative drawing. (Not in scale) All Dimensions are in mm
11 MP Micrometer pointer.
5 Movement : SS 304
7 Accuracy : ± 1 % of F.S.
NOTE:130% F.S. Over Pressure can not be witness during inspection due to requirement of stopper pin at both end
Note: This is only indicative drawing. (Not in scale) All Dimensions are in mm
4 Execution L IP 65
11 MP Micrometer pointer.
Option
The pointer stops shall be provided at both ends of the scale to restrict the
12 : pointer motion beyond 5% above the maximum of scale and less than 5%
below the minimum of the scale.
OTHER SPECIFICATION
1 Construction : Solid front safety pattern cylindrical case with blowout at the back
5 Movement : SS 304
7 Accuracy : ± 1 % of F.S.
NOTE:130% F.S. Over Pressure can not be witness during inspection due to requirement of stopper pin at both end
DRAWING FOR DIAPHRAGM TYPE DIFFERENTIAL PRESSURE GAUGE ( MODEL : PG‐5 ) BRAND: MASS
Note: This is only indicative drawing. (Not in scale) All Dimensions are in mm
4 Execution L IP 65
Open front cylindrical case with snap action bayonet type bezel ring with blow
1 Construction :
out disc.
NOTE:130% F.S. Over Pressure can not be witness during inspection due to requirement of stopper pin at both end
DRAWING FOR DIAPHRAGM TYPE PRESSURE GAUGE ( MODEL : PG‐6 ) BRAND: MASS
Note: This is only indicative drawing. (Not in scale) All Dimensions are in mm
DATASHEET FOR DIAPHRAGM TYPE PRESSURE GAUGE ( MODEL : PG‐6 ) BRAND: MASS
6 Facing T Threaded
11 MP Micrometer pointer
Option ( As applicable )
12 SG Safety glass.
The pointer stops shall be provided at both ends of the scale to restrict the
13 : pointer motion beyond 5% above the maximum of scale and less than 5%
below the minimum of the scale.
Other specification
5 Movement : SS 304
NOTE:130% F.S. Over Pressure can not be witness during inspection due to requirement of stopper pin at both end
DRAWING FOR CAPSULE TYPE PRESSURE GAUGE ( MODEL : PG‐7 ) BRAND: MASS
Note: This is only indicative drawing. (Not in scale) All Dimensions are in mm
DATASHEET FOR CAPSULE TYPE PRESSURE GAUGE ( MODEL : PG‐7 ) BRAND: MASS
4 Execution L IP 65
11 SG Safety Glass
The pointer stops shall be provided at both ends of the scale to restrict the
12 Option : pointer motion beyond 5% above the maximum of scale and less than 5%
below the minimum of the scale.
OTHER SPECIFICATION
Open front cylindrical case, with blow out disc at the back and vent plug on
1 Construction :
top.
2 Measuring Principle : Capsule
6 Accuracy : ± 2 % of F.S.
NOTE:130% F.S. Over Pressure can not be witness during inspection due to requirement of stopper pin at both end
Note: This is only indicative drawing. (Not in scale) All Dimensions are in mm
S SS 316
System material
4
( As applicable )
L SS 316L
Note: This is only indicative drawing. (Not in scale) All Dimensions are in mm
Note: This is only indicative drawing. (Not in scale) All Dimensions are in mm
CRS Sheet
We have received Code‐R approval with minor comment from EIL and We have
taken clearance from EIL against minor comment through email. Please refer
below email conversation for your ready reference and further action for final
approval on attached revised document rev.01 dtd‐07/01/2019.
As conveyed in our trailing email in future please ensure the specifications are approved from
Regards,
JERRY JOHNSON
PRE C IS ION MAS S PROD U CT S PVT.L TD Datasheet Drawn By Checked by Approved by
18I011
Plot No. 2306,11-FEB-2019
G.I.D.C. Industrial Estate No AKSHAY V.P.GEVARIYA R.P.PATEL
CHHATRAL – 382 729 Ta. Kalol (N.G.) Dist. Gandhinagar
GAUTAM ANKIT
Ph.: 91‐2764‐233681/82/83 SINGH (C637)
Fax : 233440 Revision 01 Prepared by
Email :s a l e s @ p r e c i s i o n m a s s . c o m Date 07/01/2019 N.H PATEL
Page 18 of 27
Client : IOCL‐Bongaigaon Refinery Page 19 of 24
PO No : A888/1101/728/PO‐2115 DATED.04.09.2018
OC No : 809043
INSTRUMENTATION
Ext:‐ 01126762559
Respected Sir,
With reference to below email , Selection of raw material of syphon is to be done based on process pressure
and temperature.
Syphon has been designed and constructed to comply with the Indian Boiler Regulations 1950 for a maximum
working pressure of 176 Kg/cm2 & maximum temperature of 400 deg C and satisfactorily withstood a
hydraulic test using water to a pressure of 264 kg/cm2(g) on the day 01/12/2018 in the presence
of responsible IBR‐Inspection authority.
Our manufactured Syphon is suitable to your process requirement so we request you to please provide
clearance to proceed further accordingly.
Best Regards,
Viral Gevariya | Project Department
Precision Mass Products Pvt. Ltd.
M. +91 9377003092 | P. +91 2764 233681/2/3 | F. +91 2764 233440
W. www.precisionmass.com
Disclaimer: This email message from Precision Mass Products Pvt. Ltd. is for the sole use of the intended recipient(s) and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the
original message.
PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL
Dear Sir,
Kindly note we need to content your statement that you have proceeded with the design as per
As an enlisted Vendor, you should be aware that the MR for the pressure gauge is on Category-
In future please ensure the specifications are approved from EIL before getting manufactured.
Regards,
JERRY JOHNSON
INSTRUMENTATION
Ext:‐ 01126762559
Respected Sir,
With reference to below email , Our intention is not to do contention but we have just brief about things
which happened/experienced.
It is very difficult to comply now as all syphons are ready and due to huge financial impact on us. as per IBR
requirement , we are already technically feasible inline with process pressure and temp. requirement. so
kindly accept the items which are ready for dispatch.
Best Regards,
Viral Gevariya | Project Department
Precision Mass Products Pvt. Ltd.
M. +91 9377003092 | P. +91 2764 233681/2/3 | F. +91 2764 233440
W. www.precisionmass.com
Disclaimer: This email message from Precision Mass Products Pvt. Ltd. is for the sole use of the intended recipient(s) and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the
original message.
PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL
Dear Sir,
In reference to your below message, kindly note our replies embedded in the message.
Regards,
REF :
(1) IOCL‐Panipat ; PR‐A882 ; PMPPL OC NO: 1809039
(2) IOCL‐Vadodara ; PR‐A885 ; PMPPL OC NO: 1809040
(3) IOCL‐Haldia ; PR‐A886 ; PMPPL OC NO: 1809041
(4) IOCL‐Mathura ; PR‐A887 ; PMPPL OC NO: 1809042
(5) IOCL‐Dhaligaon ; PR‐A888 ; PMPPL OC NO: 1809043
Respected Sir,
We have refer attached Code‐R Minor commented drawing and below is our reply against commented
drawing so we request you to please refer the same and please provide your clearance so we can proceed
further accordingly.
EIL Comment‐1: Syphon connection 1/2" NPT(M) & 1/2" Plain require
PMPPL reply : We can provide in line with your latest requirement.
EIL Reply:‐ Noted and closed.
PMPPL Reply : Syphon's pipe type is 1/2" schedule 40 inline with offer and We can’t fulfill this post order
requirement as material is already ready.
Please note that our offered schedule 40 type syphon can withstand upto max. pressure 175 kg/cm2 & max.
temp. 400 Deg c which is within your requirement so we request you please accept pipe type schedule 40.
NOTE : all syphons are ready inline with our offer and at time of dispatch,you are changing syphon configuration so some of
parameter is possible to change in line with your latest requirement but some of parameter is not possible to change now. Please
note that for special design of syphon we are getting special drawing from EIL during enquiry stage. I am attaching drawing of special
design syphon herewith this email which we received against equiry of M/s,HMEL & M/s, Dangote but for this project we haven't
received any special drawing during enquiry stage so please provide your clearance so we can dispatch material.
EIL Reply:‐ Vendors contention is not correct. If the MR specifications didnt have the siphon specifications, Vendor
should have sought as part of the pre‐bid clarifications. Moreover Vendor claims to have the EIL specifications for the
HMEL and DORC, Vendor should have followed the same.
Best Regards,
PRE C IS ION MAS S PROD U CT S PVT.L TD Datasheet Drawn By Checked by Approved by
18I011
Plot No. 2306,11-FEB-2019
G.I.D.C. Industrial Estate No AKSHAY V.P.GEVARIYA R.P.PATEL
CHHATRAL – 382 729 Ta. Kalol (N.G.) Dist. Gandhinagar
GAUTAM ANKIT
Ph.: 91‐2764‐233681/82/83 SINGH (C637)
Fax : 233440 Revision 01 Prepared by
Email :s a l e s @ p r e c i s i o n m a s s . c o m Date 07/01/2019 N.H PATEL
Page 23 of 27
Client : IOCL‐Bongaigaon Refinery Page 24 of 24
PO No : A888/1101/728/PO‐2115 DATED.04.09.2018
OC No : 809043
Disclaimer: This email message from Precision Mass Products Pvt. Ltd. is for the sole use of the intended recipient(s) and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the
original message.
PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL
Please be informed that the following Document has been published on the vendor Portal
PUMP OUTLET
PG‐1
PG‐2
PG‐1
150‐ZPS‐S‐L‐04‐L‐0/1.6‐kg/cm2‐(=)‐NH‐SG‐MP
150‐ZPS‐S‐L‐04‐L‐0/25‐kg/cm2‐GR‐NH‐SG‐MP
150‐ZPS‐S‐L‐04‐L‐0/1.6‐kg/cm2‐(=)‐NH‐SG‐MP
PD1‐04‐M/F‐S
PD1‐04‐M/F‐S
PD1‐04‐M/F‐S
PL1‐04‐M/F‐S‐A
PL1‐04‐M/F‐S‐A
159 81‐PI‐8306 A888 DHDT R 81 01 PRESSURE GAUGE FRACTIONATOR SOUR WATER 1.5"‐P‐81‐8309‐A16A‐IS A16A ½", NPT(M) Bourdon 0 1.6 1 4.9 kg/cm2 110 315 °C C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES PG‐1
150‐ZPS‐L‐L‐04‐L‐0/1.6‐kg/cm2‐(=)‐NH‐SG‐MP‐CD5 PL1‐04‐M/F‐L‐A
160
161
81‐PI‐8307
81‐PI‐8308
A888
A888
DHDT R
DHDT R
81
81
GAUTAM ANKIT SINGH (C637)
01
01
PRESSURE GAUGE
PRESSURE GAUGE
FRACTIONATOR SOUR WATER
FRACTIONATOR SOUR WATER
1"‐P‐81‐8311‐A16A‐IS
1.5"‐P‐81‐8310‐A16A‐IS
A16A
A16A
½", NPT(M)
½", NPT(M)
Bourdon
Bourdon
0
0
16
1.6
8.5
1
14.3
4.9
kg/cm2
kg/cm2
110
110
315
315
°C
°C
a,d
C
shatterproof glass
shatterproof glass
IP‐65
IP‐65
LOCAL
LOCAL
150
150
mm
mm
White
White
SS 304
SS 304
Screwed or bayonet
Screwed or bayonet
Yes
Yes
SS 316L
SS 316L
SS 316L
SS 316L
SS
SS
YES
YES
YES
YES
YES
YES
PUMP OUTLET PG‐2
PG‐1
150‐ZPS‐L‐L‐04‐L‐0/16‐kg/cm2‐GR‐NH‐SG‐MP‐CD5 PD1‐04‐M/F‐L
150‐ZPS‐L‐L‐04‐L‐0/1.6‐kg/cm2‐(=)‐NH‐SG‐MP‐CD5 PL1‐04‐M/F‐L‐A
162 81‐PI‐8309 A888 DHDT R 81 01 PRESSURE GAUGE FRACTIONATOR SOUR WATER 1"‐P‐81‐8312‐A16A‐IS A16A ½", NPT(M) Bourdon 0 16 8.5 14.3 kg/cm2 110 315 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES PUMP OUTLET PG‐2
150‐ZPS‐L‐L‐04‐L‐0/16‐kg/cm2‐GR‐NH‐SG‐MP‐CD5 PD1‐04‐M/F‐L
163 81‐PI‐8310 A888 DHDT R 81 01 PRESSURE GAUGE FRACTIONATOR OVHD 8"‐P‐81‐8301‐A1A‐IS A1A ½", NPT(M) Bourdon 0 1.6 0.9 3.5/fv kg/cm2 99.7 315 °C C,a,e shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PUMP OUTLET PG‐1 150‐ZPS‐S‐L‐04‐L‐0/1.6‐kg/cm2‐(=)‐NH‐SG‐MP PD1‐04‐M/F‐S PL1‐04‐M/F‐S‐A
164 81‐PI‐8312 A888 DHDT R 81 01 PRESSURE GAUGE FRACTINATOR REFLUX 6"‐P‐81‐8305‐B1A‐IH B1A ½", NPT(M) Bourdon 0 25 14 20.2 kg/cm2 110 315 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/25‐kg/cm2‐(=)‐NH‐SG‐MP
Page 25 of 27
Client IOCL
Project BS‐VI Project for Bongaigaon Refinery of IOCL
P.O A888/1101/728/PO‐2115
OC No. 809043.REV.01
Instrument List of Pressure Gauge
Model Code of Model code of Model code of
S.No Tag No. JOB NO PLANT UNIT Group No. Instrument Type Desc. Service Line No. Equipment No. PMS Gauge Connection Size Element Type Range Min Range Max Oper. Pressure Design Pressure Pressure UOM Operating Temp Design Temp Temp UOM Options Window Material Enclosure Type Mounting Dial Size Dial Size Dial Colour Case Material Bezel Ring Blowout Protection Pressure Element Material Socket Material Movement Material Zero Adjustment Hydrogen Service IBR Service NACE PWHT Model* Remarks Model Ref. Model Code of Pressure Gauge
Snubber Syphon Pressure Limiter
166 81‐PI‐8403 A888 DHDT R 81 01 PRESSURE GAUGE DIESEL PRODUCT 10"‐P‐81‐8406‐B1A‐IH B1A ½", NPT(M) Bourdon 0 40 16.5 23.5 kg/cm2 270 315 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐2 150‐ZPS‐S‐L‐04‐L‐0/40‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐S
167 81‐PI‐8404 A888 DHDT R 81 01 PRESSURE GAUGE DIESEL PRODUCT 12"‐P‐81‐8405‐A1A‐IH A1A ½", NPT(M) Bourdon 0 2.5 1.6 4.68 kg/cm2 270 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
168 81‐PI‐8405 A888 DHDT R 81 01 PRESSURE GAUGE DIESEL PRODUCT 12"‐P‐81‐8404‐A1A‐IH A1A ½", NPT(M) Bourdon 0 2.5 1.6 4.68 kg/cm2 270 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
169 81‐PI‐8406 A888 DHDT R 81 01 PRESSURE GAUGE DIESEL 10"‐P‐81‐8402‐B1A‐IH B1A ½", NPT(M) Bourdon 0 25 10.8 16.3 kg/cm2 270 315 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐2 150‐ZPS‐S‐L‐04‐L‐0/25‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐S
170 81‐PI‐8407 A888 DHDT R 81 01 PRESSURE GAUGE DIESEL 10"‐P‐81‐8402‐B1A‐IH B1A ½", NPT(M) Bourdon 0 25 10.8 16.3 kg/cm2 270 315 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐2 150‐ZPS‐S‐L‐04‐L‐0/25‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐S
171 81‐PI‐8408 A888 DHDT R 81 01 PRESSURE GAUGE DIESEL 12"‐P‐81‐8401‐A1A‐IH A1A ½", NPT(M) Bourdon 0 4 1.8 5 kg/cm2 270 315 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/4‐kg/cm2‐(=)‐NH‐SG‐MP
172 81‐PI‐8409 A888 DHDT R 81 01 PRESSURE GAUGE DIESEL 12"‐P‐81‐8410‐A1A‐IH A1A ½", NPT(M) Bourdon 0 4 1.8 5 kg/cm2 270 315 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/4‐kg/cm2‐(=)‐NH‐SG‐MP
173 81‐PI‐8501 A888 DHDT R 81 01 PRESSURE GAUGE FRACT. REBOILER HEATER FEED 6"‐P‐81‐8501‐B1A‐IH B1A ½", NPT(M) Bourdon 0 10 4.7 16.2 kg/cm2 265 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1
150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐C
174 81‐PI‐8502 A888 DHDT R 81 01 PRESSURE GAUGE 81‐F‐002 FEED 6"‐P‐81‐8502‐B1A‐IH B1A ½", NPT(M) Bourdon 0 10 4.7 16.2 kg/cm2 265 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐C
175 81‐PI‐8503 A888 DHDT R 81 01 PRESSURE GAUGE 81‐F‐002 FEED 6"‐P‐81‐8503‐B1A‐IH B1A ½", NPT(M) Bourdon 0 10 4.7 16.2 kg/cm2 265 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐C
176 81‐PI‐8504 A888 DHDT R 81 01 PRESSURE GAUGE 81‐F‐002 FEED 6"‐P‐81‐8504‐B1A‐IH B1A ½", NPT(M) Bourdon 0 10 4.7 16.2 kg/cm2 265 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐C
177 81‐PI‐8509 A888 DHDT R 81 01 PRESSURE GAUGE 81‐F‐002 OUTLET 10"‐P‐81‐8505‐B1A‐IH B1A ½", NPT(M) Bourdon 0 2.5 1.2 16.2 kg/cm2 286 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
178 81‐PI‐8510 A888 DHDT R 81 01 PRESSURE GAUGE 81‐F‐002 OUTLET 10"‐P‐81‐8506‐B1A‐IH B1A ½", NPT(M) Bourdon 0 2.5 1.2 16.2 kg/cm2 286 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
179 81‐PI‐8511 A888 DHDT R 81 01 PRESSURE GAUGE 81‐F‐002 OUTLET 10"‐P‐81‐8507‐B1A‐IH B1A ½", NPT(M) Bourdon 0 2.5 1.2 16.2 kg/cm2 286 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
180 81‐PI‐8512 A888 DHDT R 81 01 PRESSURE GAUGE 81‐F‐002 OUTLET 10"‐P‐81‐8508‐B1A‐IH B1A ½", NPT(M) Bourdon 0 2.5 1.2 16.2 kg/cm2 286 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
181 81‐PI‐8513 A888 DHDT R 81 01 PRESSURE GAUGE FRACT. REBOILER HEATER O 20"‐P‐81‐8509‐B1A‐IH B1A ½", NPT(M) Bourdon 0 2.5 1.2 16.2 kg/cm2 286 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
182 81‐PI‐8515 A888 DHDT R 81 01 PRESSURE GAUGE MP STEAM 4"‐SM‐81‐8508‐B2A‐IH B2A ½", NPT(M) Bourdon 0 40 20 22/FV kg/cm2 230 245 °C e,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/40‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
183 81‐PI‐8517 A888 DHDT R 81 04 Pressure Gauge draft A1A 1/2" NPT(F) draft gauge ‐50 25 ‐50 to 25 MMWC °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐7 150‐CPS‐S‐L‐04‐L‐(‐)60/40‐mmwc‐(=)‐NH‐SG‐ADPT
ADPT‐04T‐04T‐S
184 81‐PI‐8518 A888 DHDT R 81 04 Pressure Gauge draft A1A 1/2" NPT(F) draft gauge ‐50 25 ‐50 to 25 MMWC °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐7 150‐CPS‐S‐L‐04‐L‐(‐)60/40‐mmwc‐(=)‐NH‐SG‐ADPT
ADPT‐04T‐04T‐S
185 81‐PI‐8519 A888 DHDT R 81 04 Pressure Gauge draft A1A 1/2" NPT(F) draft gauge ‐50 25 ‐50 to 25 MMWC °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐7 150‐CPS‐S‐L‐04‐L‐(‐)60/40‐mmwc‐(=)‐NH‐SG‐ADPT
ADPT‐04T‐04T‐S
186 81‐PI‐8523 A888 DHDT R 81 04 Pressure Gauge draft A1A 1/2" NPT(F) draft gauge ‐50 25 ‐50 to 25 MMWC °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐7 150‐CPS‐S‐L‐04‐L‐(‐)60/40‐mmwc‐(=)‐NH‐SG‐ADPT
ADPT‐04T‐04T‐S
187 81‐PI‐8601 A888 DHDT R 81 01 PRESSURE GAUGE ATF STRIPPER OVHD. 8"‐P‐81‐8601‐A1A‐IH A1A ½", NPT(M) Bourdon 0 2.5 1.1 4/FV kg/cm2 199 315 °C e,c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
188 81‐PI‐8605 A888 DHDT R 81 01 PRESSURE GAUGE DIESEL PRODUCT 10"‐P‐81‐8610‐B1A‐IH B1A ½", NPT(M) Bourdon 0 40 16.1 26.5 kg/cm2 266 315 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PUMP OUTLET PG‐2 150‐ZPS‐S‐L‐04‐L‐0/40‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐S
189 81‐PI‐8606 A888 DHDT R 81 01 PRESSURE GAUGE DIESEL PRODUCT 10"‐P‐81‐8611‐B1A‐IH B1A ½", NPT(M) Bourdon 0 16 10 23.5 kg/cm2 258‐266 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐D
190 81‐PI‐8607 A888 DHDT R 81 01 PRESSURE GAUGE ATF STRIPPER REBOILER OUTLET 10"‐P‐81‐8608‐A1A‐IH A1A ½", NPT(M) Bourdon 0 2.5 1.14 4.5 kg/cm2 206 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1
150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
191 81‐PI‐8608 A888 DHDT R 81 01 PRESSURE GAUGE ATF STRIPPER REBOILER 8"‐P‐81‐8607‐A1A‐IH A1A ½", NPT(M) Bourdon 0 2.5 1.14 4.5 kg/cm2 202 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
192 81‐PI‐8609 A888 DHDT R 81 01 PRESSURE GAUGE ATF 6"‐P‐81‐8603‐A1A‐IH A1A ½", NPT(M) Bourdon 0 2.5 1.14 5.1 kg/cm2 206 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
193 81‐PI‐8610 A888 DHDT R 81 01 PRESSURE GAUGE ATF 4"‐P‐81‐8605‐B1A‐IH B1A ½", NPT(M) Bourdon 0 40 16.8 23.5 kg/cm2 206 315 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐2 150‐ZPS‐S‐L‐04‐L‐0/40‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐S
194 81‐PI‐8611 A888 DHDT R 81 01 PRESSURE GAUGE ATF 6"‐P‐81‐8604‐A1A‐IH A1A ½", NPT(M) Bourdon 0 2.5 1.4 5.1 kg/cm2 206 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
195 81‐PI‐8612 A888 DHDT R 81 01 PRESSURE GAUGE ATF 4"‐P‐81‐8606‐B1A‐IH B1A ½", NPT(M) Bourdon 0 40 16.8 23.5 kg/cm2 206 315 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐2 150‐ZPS‐S‐L‐04‐L‐0/40‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐S
196 81‐PI‐8701 A888 DHDT R 81 01 PRESSURE GAUGE ATF PRODUCT 4"‐P‐81‐1951‐B1A‐‐IS B1A ½", NPT(M) Bourdon 0 16 9.5 23.5 kg/cm2 84.6 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐D
197 81‐PI‐8704 A888 DHDT R 81 01 PRESSURE GAUGE ATF PRODUCT 4"‐P‐81‐8715‐B1A B1A ½", NPT(M) Bourdon 0 16 6.8 23.5 kg/cm2 40 100 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐D
198 81‐PI‐8706 A888 DHDT R 81 01 PRESSURE GAUGE ATF PRODUCT 81‐G‐005 B1A ½", NPT(M) Bourdon 0 16 6.8 23.5 kg/cm2 40 100 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐D
199 81‐PI‐8802 A888 DHDT R 81 01 PRESSURE GAUGE ATF PRODUCT 4"‐P‐81‐3323‐B1A A1A ½", NPT(M) Bourdon 0 16 9 23.5 kg/cm2 40 65 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐D
200 81‐PI‐8804 A888 DHDT R 81 01 PRESSURE GAUGE ATF PRODUCT 4"‐P‐81‐8803‐B1A B1A ½", NPT(M) Bourdon 0 16 9 23.5 kg/cm2 40 65 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐D
201 81‐PI‐8902A A888 DHDT R 81 01 PRESSURE GAUGE FUEL OIL 2"‐FO‐81‐8901‐A1A‐IT A1A ½", NPT(M) Bourdon 0 16 10.5 16.1 kg/cm2 95 150 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP
202 81‐PI‐8902B A888 DHDT R 81 01 PRESSURE GAUGE FUEL OIL 2"‐FO‐81‐8901‐A1A‐IT A1A ½", NPT(M) Bourdon 0 16 10.5 16.1 kg/cm2 95 150 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP
203 81‐PI‐8902C A888 DHDT R 81 01 PRESSURE GAUGE FUEL OIL 2"‐FO‐81‐8901‐A1A‐IT A1A ½", NPT(M) Bourdon 0 16 10.5 16.1 kg/cm2 95 150 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP
204 81‐PI‐8902D A888 DHDT R 81 01 PRESSURE GAUGE FUEL OIL 2"‐FO‐81‐8901‐A1A‐IT A1A ½", NPT(M) Bourdon 0 16 10.5 16.1 kg/cm2 95 150 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP
205 81‐PI‐8902E A888 DHDT R 81 01 PRESSURE GAUGE FUEL OIL 2"‐FO‐81‐8901‐A1A‐IT A1A ½", NPT(M) Bourdon 0 16 10.5 16.1 kg/cm2 95 150 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP
206 81‐PI‐8903A A888 DHDT R 81 01 PRESSURE GAUGE FUEL GAS 3"‐FG‐81‐6112‐A1A‐IT A11K ½", NPT(M) Bourdon 0 2.5 1.5 6 kg/cm2 45 130 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
207 81‐PI‐8903B A888 DHDT R 81 01 PRESSURE GAUGE FUEL GAS 3"‐FG‐81‐6112‐A1A‐IT A11K ½", NPT(M) Bourdon 0 2.5 1.5 6 kg/cm2 45 130 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
208 81‐PI‐8903C A888 DHDT R 81 01 PRESSURE GAUGE FUEL GAS 3"‐FG‐81‐6112‐A1A‐IT A11K ½", NPT(M) Bourdon 0 2.5 1.5 6 kg/cm2 45 130 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
209 81‐PI‐8903D A888 DHDT R 81 01 PRESSURE GAUGE FUEL GAS 3"‐FG‐81‐6112‐A1A‐IT A11K ½", NPT(M) Bourdon 0 2.5 1.5 6 kg/cm2 45 130 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
210 81‐PI‐8903E A888 DHDT R 81 01 PRESSURE GAUGE FUEL GAS 3"‐FG‐81‐6112‐A1A‐IT A11K ½", NPT(M) Bourdon 0 2.5 1.5 6 kg/cm2 45 130 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
211 81‐PI‐8914 A888 DHDT R 81 01 PRESSURE GAUGE FUEL GAS 3"‐FG‐81‐6112‐A1A‐IT A1A ½", NPT(M) Bourdon 0 2.5 1.5 6 kg/cm2 45 130 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
212 81‐PI‐8915 A888 DHDT R 81 01 PRESSURE GAUGE PILOT GAS 1.5"‐FG‐81‐8902‐A11K‐IT A11K ½", NPT(M) Bourdon 0 6 3‐3.5 6 kg/cm2 40‐50 130 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/6‐kg/cm2‐(=)‐NH‐SG‐MP
213 81‐PI‐8917 A888 DHDT R 81 01 PRESSURE GAUGE ATOMISING STEAM 1.5"‐SM‐81‐8503‐B2A‐IH B2A ½", NPT(M) Bourdon 0 40 10.0‐20.0 22/FV kg/cm2 230 245 °C e,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes HEATER PG‐1 150‐ZPS‐S‐L‐04‐L‐0/40‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
214 81‐PISP‐0001 A888 DHDT R 81 01 PRESSURE GAUGE FRACTIONATOR REFLUX OVHD 4"‐FL‐81‐8303‐A1A‐IS A1A ½", NPT(M) Bourdon 0 1 0.4‐0.6 3.5/FV kg/cm2 100 315 °C e,c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PUMP OUTLET PG‐1
150‐ZPS‐S‐L‐04‐L‐0/1‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐A
215 81‐PISP‐0002 A888 DHDT R 81 01 PRESSURE GAUGE FRACTIONATOR SOUR WATER 1.5"‐P‐81‐8310‐A16A‐IS A16A ½", NPT(M) Bourdon 0 1.6 1 4.9 kg/cm2 110 315 °C C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES PG‐1
150‐ZPS‐L‐L‐04‐L‐0/1.6‐kg/cm2‐(=)‐NH‐SG‐MP‐CD5 PL1‐04‐M/F‐L‐A
216 81‐PISP‐0003 A888 DHDT R 81 01 PRESSURE GAUGE FRACTIONATOR OVHD 8"‐P‐81‐8301‐A1A‐IS A1A ½", NPT(M) Bourdon 0 1.6 0.9 3.5/fv kg/cm2 99.7 315 °C C,a,e shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PUMP OUTLET PG‐1 150‐ZPS‐S‐L‐04‐L‐0/1.6‐kg/cm2‐(=)‐NH‐SG‐MP PD1‐04‐M/F‐S PL1‐04‐M/F‐S‐A
217 81‐PISP‐0004 A888 DHDT R 81 01 PRESSURE GAUGE DIESEL PRODUCT 12"‐P‐81‐8405‐A1A‐IH A1A ½", NPT(M) Bourdon 0 2.5 1.6 4.68 kg/cm2 270 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
218 81‐PISP‐0005 A888 DHDT R 81 01 PRESSURE GAUGE DIESEL PRODUCT 12"‐P‐81‐8404‐A1A‐IH A1A ½", NPT(M) Bourdon 0 2.5 1.6 4.68 kg/cm2 270 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
219 81‐PISP‐0006 A888 DHDT R 81 01 PRESSURE GAUGE 81‐F‐002 OUTLET 10"‐P‐81‐8505‐B1A‐IH B1A ½", NPT(M) Bourdon 0 2.5 1.2 16.2 kg/cm2 286 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
220 81‐PISP‐0007 A888 DHDT R 81 01 PRESSURE GAUGE 81‐F‐002 OUTLET 10"‐P‐81‐8506‐B1A‐IH B1A ½", NPT(M) Bourdon 0 2.5 1.2 16.2 kg/cm2 286 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
221 81‐PISP‐0008 A888 DHDT R 81 01 PRESSURE GAUGE DIESEL 12"‐P‐81‐8410‐A1A‐IH A1A ½", NPT(M) Bourdon 0 4 1.8 5 kg/cm2 270 315 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/4‐kg/cm2‐(=)‐NH‐SG‐MP
222 81‐PISP‐0009 A888 DHDT R 81 01 PRESSURE GAUGE PILOT GAS 1.5"‐FG‐81‐8902‐A11K‐IT A11K ½", NPT(M) Bourdon 0 6 3‐3.5 6 kg/cm2 40‐50 130 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/6‐kg/cm2‐(=)‐NH‐SG‐MP
223 81‐PISP‐0010 A888 DHDT R 81 01 PRESSURE GAUGE INDMAX LCO FEED AT B/L 3"‐P‐81‐1158‐A1A‐IH A1A ½", NPT(M) Bourdon 0 10 6 H kg/cm2 143 H °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
224 81‐PISP‐0011 A888 DHDT R 81 01 PRESSURE GAUGE 81‐F‐002 FEED 6"‐P‐81‐8503‐B1A‐IH B1A ½", NPT(M) Bourdon 0 10 4.7 16.2 kg/cm2 265 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐C
225 81‐PISP‐0012 A888 DHDT R 81 01 PRESSURE GAUGE FRACTIONATOR NAPHTHA A1A ½", NPT(M) Bourdon 0 16 0.9‐8.4 4.3/FV kg/cm2 235 262 °C e shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP
226 81‐PISP‐0013 A888 DHDT R 81 01 PRESSURE GAUGE DIESEL PRODUCT 10"‐P‐81‐8611‐B1A‐IH B1A ½", NPT(M) Bourdon 0 16 10 23.5 kg/cm2 258‐266 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐D
227 81‐PISP‐0014 A888 DHDT R 81 01 PRESSURE GAUGE ATF PRODUCT 4"‐P‐81‐1951‐B1A‐‐IS B1A ½", NPT(M) Bourdon 0 16 9.5 23.5 kg/cm2 84.6 315 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐D
228 81‐PISP‐0015 A888 DHDT R 81 01 PRESSURE GAUGE FRACTIONATOR SOUR WATER 1"‐P‐81‐8312‐A16A‐IS A16A ½", NPT(M) Bourdon 0 16 8.5 14.3 kg/cm2 110 315 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES PUMP OUTLET PG‐2
150‐ZPS‐L‐L‐04‐L‐0/16‐kg/cm2‐GR‐NH‐SG‐MP‐CD5 PD1‐04‐M/F‐L
229 81‐PISP‐0016 A888 DHDT R 81 01 PRESSURE GAUGE DIESEL 10"‐P‐81‐8402‐B1A‐IH B1A ½", NPT(M) Bourdon 0 25 10.8 16.3 kg/cm2 270 315 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/25‐kg/cm2‐(=)‐NH‐SG‐MP
230 81‐PISP‐0017 A888 DHDT R 81 01 PRESSURE GAUGE DIESEL PRODUCT 10"‐P‐81‐8406‐B1A‐IH B1A ½", NPT(M) Bourdon 0 40 16.5 23.5 kg/cm2 270 315 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐2 150‐ZPS‐S‐L‐04‐L‐0/40‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐S
231 81‐PISP‐0018 A888 DHDT R 81 01 PRESSURE GAUGE ATOMISING STEAM 1.5"‐SM‐81‐8503‐B2A‐IH B2A ½", NPT(M) Bourdon 0 40 10.0‐20.0 22/FV kg/cm2 230 245 °C e,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes HEATER PG‐1 150‐ZPS‐S‐L‐04‐L‐0/40‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
232 81‐PISP‐0019 A888 DHDT R 81 01 PRESSURE GAUGE SR AND CRACKED KERO+GAS 10"‐P‐81‐1252‐F1A F1A ½", NPT(M) Bourdon 0 250 147.4 184.6 kg/cm2 40 65 °C g,a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES pump discharge PG‐4
150‐SFS‐S‐L‐04‐L‐0/250‐kg/cm2‐GR‐NH‐MP PD1‐04‐M/F‐S
OIL
233 81‐PISP‐0022 A888 DHDT R 81 04 Pressure Gauge draft A1A 1/2" NPT(F) draft gauge ‐50 25 ‐50 to 25 MMWC °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐7 150‐CPS‐S‐L‐04‐L‐(‐)60/40‐mmwc‐(=)‐NH‐SG‐ADPT
ADPT‐04T‐04T‐S
234 81‐PISP‐0023 A888 DHDT R 81 01 PRESSURE GAUGE FRACTINATOR REFLUX 8"‐P‐81‐8304‐A1A‐IH B1A ½", NPT(M) Bourdon 0 1.6 1 4.7 kg/cm2 110 315 °C C,a shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PUMP OUTLET PG‐1 150‐ZPS‐S‐L‐04‐L‐0/1.6‐kg/cm2‐(=)‐NH‐SG‐MP PD1‐04‐M/F‐S PL1‐04‐M/F‐S‐A
235 81‐PISP‐0024 A888 DHDT R 81 01 PRESSURE GAUGE ATF STRIPPER OVHD. 8"‐P‐81‐8601‐A1A‐IH A1A ½", NPT(M) Bourdon 0 2.5 1.1 4/FV kg/cm2 199 315 °C e,c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
236 81‐PISP‐0025 A888 DHDT R 81 01 PRESSURE GAUGE FUEL OIL 2"‐FO‐81‐8901‐A1A‐IT A1A ½", NPT(M) Bourdon 0 16 10.5 16.1 kg/cm2 95 150 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP
237 81‐PISP‐0026 A888 DHDT R 81 01 PRESSURE GAUGE DIESEL 10"‐P‐81‐8402‐B1A‐IH B1A ½", NPT(M) Bourdon 0 25 10.8 16.3 kg/cm2 270 315 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐2 150‐ZPS‐S‐L‐04‐L‐0/25‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐S
238 84A‐PI‐1104 A888 ARU 84A 01 PRESSURE GAUGE Rich Amine 6"‐P‐84A‐1101‐A66A A66A ½", NPT(M) Bourdon 0 16 7 kg/cm2 45 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES PG‐1 150‐ZPS‐L‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP‐CD5
239 84A‐PI‐1201 A888 ARU 84A 01 PRESSURE GAUGE Rich Amine 6"‐P‐84A‐1203‐A66A A66A ½", NPT(M) Bourdon 0 25 11.2 15.6 kg/cm2 44 100 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES pump discharge PG‐2 150‐ZPS‐L‐L‐04‐L‐0/25‐kg/cm2‐GR‐NH‐SG‐MP‐CD5 PD1‐04‐M/F‐L
240 84A‐PI‐1202 A888 ARU 84A 01 PRESSURE GAUGE Rich Amine 6"‐P‐84A‐1202‐A66A A66A ½", NPT(M) Bourdon 0 25 11.2 15.6 kg/cm2 44 100 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES pump discharge PG‐2 150‐ZPS‐L‐L‐04‐L‐0/25‐kg/cm2‐GR‐NH‐SG‐MP‐CD5 PD1‐04‐M/F‐L
241 84A‐PI‐1207 A888 ARU 84A 01 PRESSURE GAUGE Rich Amine 6"‐P‐84A‐1218‐A66A‐IH A66A ½", NPT(M) Bourdon 0 16 6.8 9.6 kg/cm2 128.5 157 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES pump discharge PG‐2 150‐ZPS‐L‐L‐04‐L‐0/16‐kg/cm2‐GR‐NH‐SG‐MP‐CD5 PD1‐04‐M/F‐L
242 84A‐PI‐1208 A888 ARU 84A 01 PRESSURE GAUGE Rich Amine 6"‐P‐84A‐1219‐A66A‐IH A66A ½", NPT(M) Bourdon 0 16 6.8 9.6 kg/cm2 128.5 157 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES pump discharge PG‐2 150‐ZPS‐L‐L‐04‐L‐0/16‐kg/cm2‐GR‐NH‐SG‐MP‐CD5 PD1‐04‐M/F‐L
243 84A‐PI‐1302 A888 ARU 84A 01 PRESSURE GAUGE Rich Amine 8"‐P‐84A‐1305‐B66A‐IH B66A ½", NPT(M) Bourdon 0 16 9.7 21.4 kg/cm2 45 85 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES pump discharge PG‐2 150‐ZPS‐L‐L‐04‐L‐0/16‐kg/cm2‐GR‐NH‐SG‐MP‐CD5 PD1‐04‐M/F‐L
244 84A‐PI‐1303 A888 ARU 84A 01 PRESSURE GAUGE Rich Amine 8"‐P‐84A‐1306‐B66A‐IH B66A ½", NPT(M) Bourdon 0 16 9.7 21.4 kg/cm2 45 85 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES pump discharge PG‐2 150‐ZPS‐L‐L‐04‐L‐0/16‐kg/cm2‐GR‐NH‐SG‐MP‐CD5 PD1‐04‐M/F‐L
245 84A‐PI‐1504 A888 ARU 84A 01 PRESSURE GAUGE Rich Amine 8"‐P‐84A‐1701‐A66A‐IH A66A ½", NPT(M) Bourdon 0 2.5 1.4 3.7/FV kg/cm2 128 157 °C e shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES PG‐1 150‐ZPS‐L‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP‐CD5
246 84A‐PI‐1506 A888 ARU 84A 01 PRESSURE GAUGE Rich Amine 8"‐P‐84A‐1504‐A66A‐IH A66A ½", NPT(M) Bourdon 0 2.5 1.4 3.7 kg/cm2 80.52 157 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES PG‐1 150‐ZPS‐L‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP‐CD5
247 84A‐PI‐1602 A888 ARU 84A 01 PRESSURE GAUGE REFLUX CONDENSATE 2"‐P‐84A‐1606‐A1N A1N ½", NPT(M) Bourdon 0 16 8.7 11.9 kg/cm2 55 100 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES pump discharge PG‐2 150‐ZPS‐L‐L‐04‐L‐0/16‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐L
248 84A‐PI‐1603 A888 ARU 84A 01 PRESSURE GAUGE REFLUX CONDENSATE 2"‐P‐84A‐1607‐A1N A1N ½", NPT(M) Bourdon 0 16 8.7 11.9 kg/cm2 55 100 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES pump discharge PG‐2 150‐ZPS‐L‐L‐04‐L‐0/16‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐L
249 84A‐PI‐1702 A888 ARU 84A 01 PRESSURE GAUGE LP Steam 12"‐SL‐84A‐1702‐A2A‐IH A2A ½", NPT(M) Bourdon 0 6 3 6.5/FV kg/cm2 143 245 °C b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/6‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
250 84A‐PI‐1803 A888 ARU 84A 01 PRESSURE GAUGE Amine 84A‐V‐05 B66A ½", NPT(M) Bourdon 0 1.6 0.1‐0.7 3.5 kg/cm2 AMB‐75 200 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES PG‐1 150‐ZPS‐L‐L‐04‐L‐0/1.6‐kg/cm2‐(=)‐NH‐SG‐MP‐CD5 PL1‐04‐M/F‐L‐A
251 84A‐PI‐1804 A888 ARU 84A 01 PRESSURE GAUGE Nitrogen 2"‐IG‐84A‐1801‐A3A A3A ½", NPT(M) Bourdon 0 10 5 10.5 kg/cm2 AMB 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
252 84A‐PI‐5101 A888 ARU 84A 01 PRESSURE GAUGE Cooling Water Return 14"‐WCR‐84A‐5101‐A93A A93A ½", NPT(M) Bourdon 0 6 2.7 8 kg/cm2 44 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/6‐kg/cm2‐(=)‐NH‐SG‐MP
253 84A‐PI‐5103 A888 ARU 84A 01 PRESSURE GAUGE DM Water Supply 3"‐WDM‐84A‐5101‐A1K A1K ½", NPT(M) Bourdon 0 16 7 12.5 kg/cm2 40 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP
254 84A‐PI‐5105 A888 ARU 84A 01 PRESSURE GAUGE Service Water Supply 3"‐WS‐84A‐5101‐A93A A93A ½", NPT(M) Bourdon 0 10 4.5 8.8 kg/cm2 amb 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
255 84A‐PI‐5107 A888 ARU 84A 01 PRESSURE GAUGE COOLING WATER SUPPLY 14"‐WCS‐84A‐5101‐A93A A93A ½", NPT(M) Bourdon 0 10 4 8 kg/cm2 30‐40 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
256 84A‐PI‐5109 A888 ARU 84A 01 PRESSURE GAUGE BOILER FEED WATER SUPPLY 2"‐WB‐84A‐5101‐B2A‐IH B2A ½", NPT(M) Bourdon 0 40 21 36 kg/cm2 110 175 °C b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/40‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
257 84A‐PI‐5201 A888 ARU 84A 01 PRESSURE GAUGE BOILER FEED WATER SUPPLY 2"‐WB‐84A‐5102‐B2A‐IH B2A ½", NPT(M) Bourdon 0 40 21 36(HOLD) kg/cm2 110 175 °C b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1
150‐ZPS‐S‐L‐04‐L‐0/40‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
258 84A‐PI‐5202 A888 ARU 84A 01 PRESSURE GAUGE LP STEAM SUPPLY 6"‐SL‐84A‐5201‐A2A‐IH A2A ½", NPT(M) Bourdon 0 4 2.5 5/FV kg/cm2 148 175 °C e,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1
150‐ZPS‐S‐L‐04‐L‐0/4‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
259 84A‐PI‐5204 A888 ARU 84A 01 PRESSURE GAUGE MP STEAM SUPPLU 6"‐SM‐84A‐5201‐B2A‐IH B2A ½", NPT(M) Bourdon 0 40 20 22/FV kg/cm2 230 245 °C e,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/40‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
260 84A‐PI‐5301 A888 ARU 84A 01 PRESSURE GAUGE FUEL GAS SUPPLY 3"‐FG‐84S‐5301‐A1A A1A ½", NPT(M) Bourdon 0 6 3.5 6 kg/cm2 45 130 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/6‐kg/cm2‐(=)‐NH‐SG‐MP
261 84A‐PI‐5303 A888 ARU 84A 01 PRESSURE GAUGE NITROGEN SUPPLY 4"‐IG‐84A‐5301‐A3A A3A ½", NPT(M) Bourdon 0 10 5 10.5 kg/cm2 28 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
262 84A‐PI‐5305 A888 ARU 84A 01 PRESSURE GAUGE PLANT AIR SUPPLY 3"‐AP‐84A‐5301‐A3A A3A ½", NPT(M) Bourdon 0 10 6.5 10.5 kg/cm2 45 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
263 84A‐PI‐5307 A888 ARU 84A 01 PRESSURE GAUGE INSTRUMENT AIR SUPPLY 3"‐AI‐84A‐5301‐A93M A93M ½", NPT(M) Bourdon 0 10 6 10.5 kg/cm2 45 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
264 84A‐PI‐5501 A888 ARU 84A 01 PRESSURE GAUGE ATM FLASH DRUM 84A‐V‐006 A1A ½", NPT(M) Bourdon ‐1 1 ATM 3.5 kg/cm2 90‐99 130 °C c,e shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐‐1/1.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐A
265 84A‐PI‐5502 A888 ARU 84A 01 PRESSURE GAUGE PURE CONDENSATE 2"‐CL‐84A‐5503‐A1A‐IH A1A ½", NPT(M) Bourdon 0 10 5.5(H) 15(H) kg/cm2 90‐99 130 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES pump discharge PG‐2 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐S
266 84A‐PI‐5503 A888 ARU 84A 01 PRESSURE GAUGE LIQUID 2"‐CL‐84A‐5504‐A1A‐IH A1A ½", NPT(M) Bourdon 0 10 5.5(H) 15(H) kg/cm2 90‐99 130 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES pump discharge PG‐2 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐S
267 84A‐PI‐5506 A888 ARU 84A 01 PRESSURE GAUGE PURE CONDENSATE 2"‐CL‐84A‐5503‐A1A‐IH A1A ½", NPT(M) Bourdon 0 10 5.5(H) 15(H) kg/cm2 90‐99 130 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
268 84A‐PI‐6201 A888 ARU 84A 01 PRESSURE GAUGE FLARE 84A‐V‐007 A16A ½", NPT(M) Bourdon 0 1.6 0.1‐0.7 3.5 kg/cm2 AMB‐128 200 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES PG‐1 150‐ZPS‐L‐L‐04‐L‐0/1.6‐kg/cm2‐(=)‐NH‐SG‐MP‐CD5 PL1‐04‐M/F‐L‐A
269 84A‐PI‐6303 A888 ARU 84A 01 PRESSURE GAUGE FLARE 3"‐FL‐84A‐6303‐B1A‐IT B1A ½", NPT(M) Bourdon 0 1.6 0.1‐0.7 3.5 kg/cm2 AMB‐128 150 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/1.6‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐A
270 84A‐PISP‐0001 A888 ARU 84A 01 PRESSURE GAUGE ATM FLASH DRUM 84A‐V‐006 A1A ½", NPT(M) Bourdon ‐1 1 ATM 3.5 kg/cm2 90‐99 130 °C c,e shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐‐1/1.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐A
271 84A‐PISP‐0002 A888 ARU 84A 01 PRESSURE GAUGE FLARE 84A‐V‐007 A16A ½", NPT(M) Bourdon 0 1.6 0.1‐0.7 3.5 kg/cm2 AMB‐128 200 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES PG‐1 150‐ZPS‐L‐L‐04‐L‐0/1.6‐kg/cm2‐(=)‐NH‐SG‐MP‐CD5 PL1‐04‐M/F‐L‐A
272 84A‐PISP‐0003 A888 ARU 84A 01 PRESSURE GAUGE FLARE 3"‐FL‐84A‐6303‐B1A‐IT B1A ½", NPT(M) Bourdon 0 1.6 0.1‐0.7 3.5 kg/cm2 AMB‐128 150 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/1.6‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐A
273 84A‐PISP‐0004 A888 ARU 84A 01 PRESSURE GAUGE Rich Amine 8"‐P‐84A‐1504‐A66A‐IH A66A ½", NPT(M) Bourdon 0 2.5 1.4 3.7 kg/cm2 80.52 157 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES PG‐1 150‐ZPS‐L‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP‐CD5
274 84A‐PISP‐0005 A888 ARU 84A 01 PRESSURE GAUGE LP STEAM SUPPLY 6"‐SL‐84A‐5201‐A2A‐IH A2A ½", NPT(M) Bourdon 0 4 2.5 5/FV kg/cm2 148 175 °C e,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/4‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
275 84A‐PISP‐0006 A888 ARU 84A 01 PRESSURE GAUGE FUEL GAS SUPPLY 3"‐FG‐84S‐5301‐A1A A1A ½", NPT(M) Bourdon 0 6 3.5 6 kg/cm2 45 130 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/6‐kg/cm2‐(=)‐NH‐SG‐MP
276 84A‐PISP‐0007 A888 ARU 84A 01 PRESSURE GAUGE PURE CONDENSATE 2"‐CL‐84A‐5503‐A1A‐IH A1A ½", NPT(M) Bourdon 0 10 5.5(H) 15(H) kg/cm2 90‐99 130 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES pump discharge PG‐2 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐S
277 84A‐PISP‐0008 A888 ARU 84A 01 PRESSURE GAUGE LIQUID 2"‐CL‐84A‐5504‐A1A‐IH A1A ½", NPT(M) Bourdon 0 10 5.5(H) 15(H) kg/cm2 90‐99 130 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES pump discharge PG‐2 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐S
278 84A‐PISP‐0009 A888 ARU 84A 01 PRESSURE GAUGE PURE CONDENSATE 2"‐CL‐84A‐5503‐A1A‐IH A1A ½", NPT(M) Bourdon 0 10 5.5(H) 15(H) kg/cm2 90‐99 130 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
279 84A‐PISP‐0010 A888 ARU 84A 01 PRESSURE GAUGE REFLUX CONDENSATE 2"‐P‐84A‐1606‐A1N A1N ½", NPT(M) Bourdon 0 16 8.7 11.9 kg/cm2 55 100 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES pump discharge PG‐2 150‐ZPS‐L‐L‐04‐L‐0/16‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐L
280 84A‐PISP‐0011 A888 ARU 84A 01 PRESSURE GAUGE REFLUX CONDENSATE 2"‐P‐84A‐1607‐A1N A1N ½", NPT(M) Bourdon 0 16 8.7 11.9 kg/cm2 55 100 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES pump discharge PG‐2 150‐ZPS‐L‐L‐04‐L‐0/16‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐L
281 84A‐PISP‐0012 A888 ARU 84A 01 PRESSURE GAUGE DM Water Supply 3"‐WDM‐84A‐5101‐A1K A1K ½", NPT(M) Bourdon 0 16 7 12.5 kg/cm2 40 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP
282 84A‐PISP‐0013 A888 ARU 84A 01 PRESSURE GAUGE Rich Amine 6"‐P‐84A‐1202‐A66A A66A ½", NPT(M) Bourdon 0 25 11.2 15.6 kg/cm2 44 100 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES pump discharge PG‐2 150‐ZPS‐L‐L‐04‐L‐0/25‐kg/cm2‐GR‐NH‐SG‐MP‐CD5 PD1‐04‐M/F‐L
283 84A‐PISP‐0014 A888 ARU 84A 01 PRESSURE GAUGE BOILER FEED WATER SUPPLY 2"‐WB‐84A‐5102‐B2A‐IH B2A ½", NPT(M) Bourdon 0 40 21 36(HOLD) kg/cm2 110 175 °C b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/40‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
284 84A‐PISP‐0015 A888 ARU 84A 01 PRESSURE GAUGE MP STEAM SUPPLU 6"‐SM‐84A‐5201‐B2A‐IH B2A ½", NPT(M) Bourdon 0 40 20 22/FV kg/cm2 230 245 °C e,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/40‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
285 84A‐PISP‐0025 A888 ARU 84A 01 PRESSURE GAUGE Rich Amine 8"‐P‐84A‐1701‐A66A‐IH A66A ½", NPT(M) Bourdon 0 2.5 1.4 3.7/FV kg/cm2 128 157 °C e shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES PG‐1 150‐ZPS‐L‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP‐CD5
286 84A‐PISP‐0026 A888 ARU 84A 01 PRESSURE GAUGE LP Steam 12"‐SL‐84A‐1702‐A2A‐IH A2A ½", NPT(M) Bourdon 0 6 3 6.5/FV kg/cm2 143 245 °C b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/6‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
287 86A‐PDI‐5101 A888 SRU 86A 05 DIFF. PRESSURE GAUGE LEAN AMINE 3”‐P‐86A‐5205‐A66AIH A66A 1/2" NPT (M) Bourdon 0 4 2.03 4.5/FV kg/cm2 129.5 8/160 °C e shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES PG‐5 150‐D101‐S‐L‐04‐L‐0/4‐kg/cm2‐(=)‐NH‐MP‐CD5
288 86A‐PDI‐5103 A888 SRU 86A 05 DIFF. PRESSURE GAUGE LEAN AMINE 3”‐P‐86A‐5107‐A66AIH A66A 1/2" NPT (M) Bourdon 0 4 2.03 4.5/FV kg/cm2 129.5 8/160 °C e shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES PG‐5 150‐D101‐S‐L‐04‐L‐0/4‐kg/cm2‐(=)‐NH‐MP‐CD5
289 86A‐PDI‐5501 A888 SRU 86A 05 DIFF. PRESSURE GAUGE LEAN AMINE 3”‐P‐86A‐5403‐A19A A19A 1/2" NPT (M) Bourdon 0 1 0.3 4.2 kg/cm2 42 8/70 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES YES PG‐5 150‐D101‐S‐L‐04‐L‐0/1‐kg/cm2‐(=)‐NH‐MP
290 86A‐PDI‐5502 A888 SRU 86A 05 DIFF. PRESSURE GAUGE LEAN AMINE 3”‐P‐86A‐5501‐A19A A19A 1/2" NPT (M) Bourdon 0 1 0.3 4.2 kg/cm2 42 8/70 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES YES PG‐5 150‐D101‐S‐L‐04‐L‐0/1‐kg/cm2‐(=)‐NH‐MP
291 86A‐PDISP‐0023 A888 SRU 86A 05 DIFF. PRESSURE GAUGE LEAN AMINE 3”‐P‐86A‐5107‐A66AIH A66A 1/2" NPT (M) Bourdon 0 4 2.03 4.5/FV kg/cm2 129.5 8/160 °C e shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES PG‐5 150‐D101‐S‐L‐04‐L‐0/4‐kg/cm2‐(=)‐NH‐MP‐CD5
292 86A‐PDISP‐0024 A888 SRU 86A 05 DIFF. PRESSURE GAUGE LEAN AMINE 3”‐P‐86A‐5403‐A19A A19A 1/2" NPT (M) Bourdon 0 1 0.3 4.2 kg/cm2 42 8/70 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES YES PG‐5 150‐D101‐S‐L‐04‐L‐0/1‐kg/cm2‐(=)‐NH‐MP
293 86A‐PI‐1506 A888 SRU 86A 01 PRESSURE GAUGE Gas 2"‐FG‐86A‐6407‐A11A‐IT A11A ½", NPT(M) Bourdon 0 6 2.53 6 kg/cm2 46 8/130 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/6‐kg/cm2‐(=)‐NH‐SG‐MP
294 86A‐PI‐1601 A888 SRU 86A 01 PRESSURE GAUGE Liquid 2"‐CH‐86A‐1605‐D2A‐IH D2A ½", NPT(M) Bourdon 0 100 45 51/FV kg/cm2 257.6 8/300 °C e,g,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐3 150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐(=)‐NH‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
295 86A‐PI‐1602 A888 SRU 86A 01 PRESSURE GAUGE Steam 2"‐SH‐86A‐7104‐D2A‐IH D2A ½", NPT(M) Bourdon 0 100 46 51/FV kg/cm2 258.9 8/300 °C e,g,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐3
150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐(=)‐NH‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
296 86A‐PI‐1701 A888 SRU 86A 01 PRESSURE GAUGE Liquid 2"‐CH‐86A‐1706‐D2A‐IH D2A ½", NPT(M) Bourdon 0 100 45 51/FV kg/cm2 257.6 8/300 °C e,g,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐3
150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐(=)‐NH‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
297 86A‐PI‐1702 A888 SRU 86A 01 PRESSURE GAUGE Steam 2"‐SH‐86A‐7105‐D2A‐IH D2A ½", NPT(M) Bourdon 0 100 46 51/FV kg/cm2 258.9 8/300 °C e,g,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐3 150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐(=)‐NH‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
298 86A‐PI‐1801 A888 SRU 86A 01 PRESSURE GAUGE Gas 2"‐FG‐86A‐1505‐A1A‐IT A1A ½", NPT(M) Bourdon 0 2.5 1.4 6 kg/cm2 45 8/130 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
299 86A‐PI‐1802 A888 SRU 86A 01 PRESSURE GAUGE Gas 2"‐IG‐86A‐1808‐A3A A3A ½", NPT(M) Bourdon 0 2.5 1.4 10.5 kg/cm2 28 65 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
300 86A‐PI‐2101 A888 SRU 86A 01 PRESSURE GAUGE Steam 86A‐V‐004 D2A ½", NPT(M) Bourdon 0 100 46 51/FV kg/cm2 258.9 8/300 °C e,g,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐3 150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐(=)‐NH‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
301 86A‐PI‐2103 A888 SRU 86A 01 PRESSURE GAUGE Gas 86A‐WBH‐001 A19A ½", NPT(M) Bourdon 0 100 46 51/FV kg/cm2 258.9 8/300 °C e,g shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES YES PG‐3 150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐(=)‐NH‐MP
302 86A‐PI‐2201 A888 SRU 86A 01 PRESSURE GAUGE Steam 86A‐E‐002 A2A ½", NPT(M) Bourdon 0 10 4 7/FV kg/cm2 151.4 8/180 °C e,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
303 86A‐PI‐2301 A888 SRU 86A 01 PRESSURE GAUGE HP Condensate 2”‐CH‐86A‐2305‐D2AIH D2A ½", NPT(M) Bourdon 0 100 45 51/FV kg/cm2 257.6 8/300 °C e,g,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐3
150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐(=)‐NH‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
304 86A‐PI‐2302 A888 SRU 86A 01 PRESSURE GAUGE Steam 2"‐SH‐86A‐7101‐D2A‐IH D2A ½", NPT(M) Bourdon 0 100 46 51/FV kg/cm2 151.4 8/180 °C e,g,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐3
150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐(=)‐NH‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
305 86A‐PI‐2502 A888 SRU 86A 01 PRESSURE GAUGE Steam 2"‐SH‐86A‐7102‐D2A‐IH D2A ½", NPT(M) Bourdon 0 100 46 51/FV kg/cm2 258.9 8/300 °C e,g,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐3
150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐(=)‐NH‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
306 86A‐PI‐2702 A888 SRU 86A 01 PRESSURE GAUGE Steam 86A‐E‐005 A2A ½", NPT(M) Bourdon 0 1.6 1 7/FV kg/cm2 120 8/180 °C C,e,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/1.6‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB PL1‐04‐M/F‐S‐A
307 86A‐PI‐3006 A888 SRU 86A 01 PRESSURE GAUGE Steam 3"‐SL‐86A‐3016‐A2AIH A1N ½", NPT(M) Bourdon 0 16 7 7/FV kg/cm2 151.4 8/180 °C e shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES PG‐1 150‐ZPS‐L‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP
308 86A‐PI‐4101 A888 SRU 86A 01 PRESSURE GAUGE Steam 2"‐SH‐86A‐7103‐D2A‐IH D2A ½", NPT(M) Bourdon 0 100 46 51/FV kg/cm2 258.9 8/300 °C e,g,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐3 150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐(=)‐NH‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
309 86A‐PI‐4102 A888 SRU 86A 01 PRESSURE GAUGE Liquid 2"‐CH‐86A‐4105‐D2A‐IH D2A ½", NPT(M) Bourdon 0 100 45 51/FV kg/cm2 257.6 8/300 °C e,g,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐3
150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐(=)‐NH‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
310 86A‐PI‐4301 A888 SRU 86A 01 PRESSURE GAUGE Gas 86A‐E‐102 A2A ½", NPT(M) Bourdon 0 10 4 7/FV kg/cm2 151.4 8/180 °C e,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1
150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
311 86A‐PI‐4401 A888 SRU 86A 01 PRESSURE GAUGE Steam 3"‐SL‐86A‐4402‐A2A‐IH A2A ½", NPT(M) Bourdon 0 6 3.4 7/FV kg/cm2 149.1 8/180 °C e,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/6‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
312 86A‐PI‐5103 A888 SRU 86A 01 PRESSURE GAUGE Liquid 3”‐P‐86A‐5205‐A66AIH A66A ½", NPT(M) Bourdon 0 4 2.03 4.5/FV kg/cm2 129.5 8/160 °C e shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES YES YES PG‐1 150‐ZPS‐L‐L‐04‐L‐0/4‐kg/cm2‐(=)‐NH‐SG‐MP‐CD5
313
314
315
86A‐PI‐5104
86A‐PI‐5106
86A‐PI‐5302
A888
A888
A888
SRU
SRU
SRU
86A
86A
86A
11-FEB-2019
01
01
01
PRESSURE GAUGE
PRESSURE GAUGE
PRESSURE GAUGE
Liquid
Liquid
Steam
3"‐P‐86A‐5108‐A66AIS
3"‐P‐86A‐5106‐A19A‐IS
4"‐SL‐86A‐7218‐A2A‐IH
A66AIS
A19A
A2A
½", NPT(M)
½", NPT(M)
½", NPT(M)
Bourdon
Bourdon
Bourdon
0
0
0
10
2.5
10
5.5
1.52
4
11.5
4.5
7/FV
kg/cm2
kg/cm2
kg/cm2
47.3
67
151.4
8/80
8/160
8/180
°C
°C
°C
c
e,b
shatterproof glass
shatterproof glass
shatterproof glass
IP‐65
IP‐65
IP‐65
LOCAL
LOCAL
LOCAL
150
150
150
mm
mm
mm
White
White
White
SS 304
SS 304
SS 304
Screwed or bayonet
Screwed or bayonet
Screwed or bayonet
Yes
Yes
Yes
SS 316L
SS 316
SS 316
SS 316L
SS 316
SS 316
SS
SS
SS
YES
YES
YES yes
YES YES
YES
PG‐1
PG‐1
PG‐1
150‐ZPS‐L‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP‐CD5
150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP
150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
PL1‐04‐M/F‐S‐B
316 86A‐PI‐5305 A888 SRU 86A 01 PRESSURE GAUGE Liquid 2"‐CL‐86A‐5305‐A2A‐IH A2A ½", NPT(M) Bourdon 0 6 3.4 7/FV kg/cm2 46.6 8/180 °C e,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/6‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
317 86A‐PI‐5402 A888 SRU 86A 01 PRESSURE GAUGE Gas 1 1/2"‐IG‐86A‐5408‐A3A A3A ½", NPT(M) Bourdon 0 10 5 10.5 kg/cm2 28 8/65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
318
319
320
86A‐PI‐5501
86A‐PI‐5502
86A‐PI‐5503
A888
A888
A888
SRU
SRU
SRU
86A
86A
86A
GAUTAM ANKIT SINGH (C637)
01
01
01
PRESSURE GAUGE
PRESSURE GAUGE
PRESSURE GAUGE
Liquid
Liquid
Liquid
3"‐P‐86A‐5403‐A19A
3"‐P‐86A‐5503‐A19A
3"‐P‐86A‐5501‐A19A
A19A
A19A
A19A
½", NPT(M)
½", NPT(M)
½", NPT(M)
Bourdon
Bourdon
Bourdon
0
0
0
0.6
10
0.6
0.3
5.2
0.3
4.2
10
4.2
kg/cm2
kg/cm2
kg/cm2
42
42
42
8/70
8/70
8/70
°C
°C
°C
c
a,d
c
shatterproof glass
shatterproof glass
shatterproof glass
IP‐65
IP‐65
IP‐65
LOCAL
LOCAL
LOCAL
150
150
150
mm
mm
mm
White
White
White
SS 304
SS 304
SS 304
Screwed or bayonet
Screwed or bayonet
Screwed or bayonet
Yes
Yes
Yes
SS 316
SS 316
SS 316
SS 316
SS 316
SS 316
SS
SS
SS
YES
YES
YES
YES
YES
YES
pump discharge
PG‐1
PG‐2
PG‐1
150‐ZPS‐S‐L‐04‐L‐0/0.6‐kg/cm2‐(=)‐NH‐SG‐MP
150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐GR‐NH‐SG‐MP
150‐ZPS‐S‐L‐04‐L‐0/0.6‐kg/cm2‐(=)‐NH‐SG‐MP
PD1‐04‐M/F‐S
PL1‐04‐M/F‐S‐XX
PL1‐04‐M/F‐S‐XX
321 86A‐PI‐5504 A888 SRU 86A 01 PRESSURE GAUGE Liquid 3"‐P‐86A‐5502‐A19A A19A ½", NPT(M) Bourdon 0 10 5.2 10 kg/cm2 42 8/70 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES YES pump discharge PG‐2 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐S
322 86A‐PI‐6101 A888 SRU 86A 01 PRESSURE GAUGE Liquid 2"‐CH‐86A‐6105‐D2A‐IH D2A ½", NPT(M) Bourdon 0 100 45 51/FV kg/cm2 257.6 8/300 °C e,g,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐3 150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐(=)‐NH‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
323 86A‐PI‐6102 A888 SRU 86A 01 PRESSURE GAUGE Steam 2"‐SH‐86A‐7106‐D2A‐IH D2A ½", NPT(M) Bourdon 0 100 46 51/FV kg/cm2 258.9 8/300 °C e,g,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐3
150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐(=)‐NH‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
324 86A‐PI‐6301 A888 SRU 86A 01 PRESSURE GAUGE Liquid 2"‐CH‐86A‐6305‐D2A‐IH D2A ½", NPT(M) Bourdon 0 100 45 51/FV kg/cm2 257.6 8/300 °C e,g,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐3
150 SFS S L 04 L 0/100 k / 2 ( ) NH MP CDIB SY1 04 M/B S Q40 CDIB
Page 26 of 27
Client IOCL
Project BS‐VI Project for Bongaigaon Refinery of IOCL
P.O A888/1101/728/PO‐2115
OC No. 809043.REV.01
Instrument List of Pressure Gauge
Model Code of Model code of Model code of
S.No Tag No. JOB NO PLANT UNIT Group No. Instrument Type Desc. Service Line No. Equipment No. PMS Gauge Connection Size Element Type Range Min Range Max Oper. Pressure Design Pressure Pressure UOM Operating Temp Design Temp Temp UOM Options Window Material Enclosure Type Mounting Dial Size Dial Size Dial Colour Case Material Bezel Ring Blowout Protection Pressure Element Material Socket Material Movement Material Zero Adjustment Hydrogen Service IBR Service NACE PWHT Model* Remarks Model Ref. Model Code of Pressure Gauge
Snubber Syphon Pressure Limiter
325 86A‐PI‐6302 A888 SRU 86A 01 PRESSURE GAUGE Steam 2"‐SH‐86A‐7107‐D2A‐IH D2A ½", NPT(M) Bourdon 0 100 46 51/FV kg/cm2 258.9 8/300 °C e,g,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐3 150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐(=)‐NH‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
326 86A‐PI‐6501 A888 SRU 86A 01 PRESSURE GAUGE Gas 2"‐FG‐86A‐6506‐A11A‐IT A11A ½", NPT(M) Bourdon 0 6 2.53 6 kg/cm2 45 8/130 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/6‐kg/cm2‐(=)‐NH‐SG‐MP
327 86A‐PI‐6504 A888 SRU 86A 01 PRESSURE GAUGE Gas 2”‐FG‐86A‐6404‐A1AIT A1A ½", NPT(M) Bourdon 0 6 2.53 6 kg/cm2 45 8/130 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/6‐kg/cm2‐(=)‐NH‐SG‐MP
328 86A‐PI‐7301 A888 SRU 86A 01 PRESSURE GAUGE Gas 86A‐V‐014 A2A ½", NPT(M) Bourdon 0 10 4 7/FV kg/cm2 151.4 8/180 °C e,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
329 86A‐PI‐7501 A888 SRU 86A 01 PRESSURE GAUGE Liquid 3"‐WB‐86A‐7502‐D2A‐IH D2A ½", NPT(M) Bourdon 0 4 2 51 kg/cm2 110 8/175 °C c,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/4‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB PL1‐04‐M/F‐S‐C
330 86A‐PI‐7502 A888 SRU 86A 01 PRESSURE GAUGE Liquid 3"‐WB‐86A‐7402‐A1A‐IH A1A ½", NPT(M) Bourdon 0 4 2 51 kg/cm2 110.3 8/175 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/4‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐C
331 86A‐PI‐7503 A888 SRU 86A 01 PRESSURE GAUGE Liquid 3"‐WB‐86A‐7511‐D2A‐IH D2A ½", NPT(M) Bourdon 0 100 50.7 61 kg/cm2 110.3 8/175 °C g,a,d,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes pump discharge PG‐4 150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐GR‐NH‐MP‐CDIB PD1‐04‐M/F‐S SY1‐04‐M/B‐S‐Q40‐CDIB
332 86A‐PI‐7504 A888 SRU 86A 01 PRESSURE GAUGE BOILER FEED WATER 3”‐WB‐86A‐7514‐D2AIH D2A ½", NPT(M) Bourdon 0 100 50.7 61 kg/cm2 110.3 8/175 °C g,a,d,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes pump discharge PG‐4 150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐GR‐NH‐MP‐CDIB PD1‐04‐M/F‐S SY1‐04‐M/B‐S‐Q40‐CDIB
333 86A‐PISP‐0001 A888 SRU 86A 01 PRESSURE GAUGE Liquid 3"‐P‐86A‐5501‐A19A A19A ½", NPT(M) Bourdon 0 0.6 0.3 4.2 kg/cm2 42 8/70 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/0.6‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐XX
334 86A‐PISP‐0002 A888 SRU 86A 01 PRESSURE GAUGE Steam 86A‐E‐005 A2A ½", NPT(M) Bourdon 0 1.6 1 7/FV kg/cm2 120 8/180 °C C,e,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/1.6‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB PL1‐04‐M/F‐S‐A
335 86A‐PISP‐0003 A888 SRU 86A 01 PRESSURE GAUGE Liquid 3"‐P‐86A‐5106‐A19A‐IS A19A ½", NPT(M) Bourdon 0 2.5 1.52 4.5 kg/cm2 67 8/160 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/2.5‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐B
336 86A‐PISP‐0004 A888 SRU 86A 01 PRESSURE GAUGE Liquid 3"‐WB‐86A‐7402‐A1A‐IH A1A ½", NPT(M) Bourdon 0 4 2 51 kg/cm2 110.3 8/175 °C c shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/4‐kg/cm2‐(=)‐NH‐SG‐MP PL1‐04‐M/F‐S‐C
337 86A‐PISP‐0005 A888 SRU 86A 01 PRESSURE GAUGE Gas 2"‐FG‐86A‐6506‐A11A‐IT A11A ½", NPT(M) Bourdon 0 6 2.53 6 kg/cm2 45 8/130 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/6‐kg/cm2‐(=)‐NH‐SG‐MP
338 86A‐PISP‐0007 A888 SRU 86A 01 PRESSURE GAUGE Liquid 3"‐P‐86A‐5502‐A19A A19A ½", NPT(M) Bourdon 0 10 5.2 10 kg/cm2 42 8/70 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES YES pump discharge PG‐2 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐S
339 86A‐PISP‐0008 A888 SRU 86A 01 PRESSURE GAUGE Gas 86A‐V‐014 A2A ½", NPT(M) Bourdon 0 10 4 7/FV kg/cm2 151.4 8/180 °C e,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
340 86A‐PISP‐0009 A888 SRU 86A 01 PRESSURE GAUGE Steam 2"‐SH‐86A‐7107‐D2A‐IH D2A ½", NPT(M) Bourdon 0 100 46 51/FV kg/cm2 258.9 8/300 °C e,g,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐3
150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐(=)‐NH‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
341 86A‐PISP‐0010 A888 SRU 86A 01 PRESSURE GAUGE Liquid 2"‐CH‐86A‐6305‐D2A‐IH D2A ½", NPT(M) Bourdon 0 100 45 51/FV kg/cm2 257.6 8/300 °C e,g,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐3
150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐(=)‐NH‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
342 86A‐PISP‐0011 A888 SRU 86A 01 PRESSURE GAUGE Liquid 3"‐WB‐86A‐7511‐D2A‐IH D2A ½", NPT(M) Bourdon 0 100 50.7 61 kg/cm2 110.3 8/175 °C g,a,d,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes pump discharge PG‐4
150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐GR‐NH‐MP‐CDIB PD1‐04‐M/F‐S SY1‐04‐M/B‐S‐Q40‐CDIB
343 86A‐PISP‐0012 A888 SRU 86A 01 PRESSURE GAUGE BOILER FEED WATER 3”‐WB‐86A‐7514‐D2AIH D2A ½", NPT(M) Bourdon 0 100 50.7 61 kg/cm2 110.3 8/175 °C g,a,d,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes pump discharge PG‐4
150‐SFS‐S‐L‐04‐L‐0/100‐kg/cm2‐GR‐NH‐MP‐CDIB PD1‐04‐M/F‐S SY1‐04‐M/B‐S‐Q40‐CDIB
344 86A‐PIsp‐0015 A888 SRU 86A 01 PRESSURE GAUGE Steam 3"‐SL‐86A‐4402‐A2A‐IH A2A ½", NPT(M) Bourdon 0 6 3.4 7/FV kg/cm2 149.1 8/180 °C e,b shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/6‐kg/cm2‐(=)‐NH‐SG‐MP‐CDIB SY1‐04‐M/B‐S‐Q40‐CDIB
345 86A‐PISP‐XX16 A888 SRU 86A 01 PRESSURE GAUGE Steam 3"‐SL‐86A‐3016‐A2AIH A1N ½", NPT(M) Bourdon 0 16 7 7/FV kg/cm2 151.4 8/180 °C e shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316L SS 316L SS YES PG‐1 150‐ZPS‐L‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP
346 999‐PI‐1311 A888 U&O 999 01 PRESSURE GAUGE CRACKED FEED 6"‐P‐999‐1905‐A1A A1A ½", NPT(M) Bourdon 0 16 7.2 9.4 kg/cm2 AMB 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP
347 999‐PI‐1601 A888 U&O 999 01 PRESSURE GAUGE Hydrogen 3"‐P‐999‐1116‐B5A B5A ½", NPT(M) Bourdon 0 40 21.5 26 kg/cm2 40 73 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES Yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/40‐kg/cm2‐(=)‐NH‐SG‐MP
348 999‐PI‐1603 A888 U&O 999 01 PRESSURE GAUGE Hot Naptha 6"‐P‐999‐1131‐A1A‐IH A1A ½", NPT(M) Bourdon 0 16 9.5 14 kg/cm2 103.5 215 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP
349 999‐PI‐1702 A888 U&O 999 01 PRESSURE GAUGE Hot Naptha 3"‐P‐999‐1105‐A1A‐IH A1A ½", NPT(M) Bourdon 0 10 6 11.8 kg/cm2 60 160 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
350 999‐PI‐1704 A888 U&O 999 01 PRESSURE GAUGE Cold Naptha 4"‐P‐999‐1133‐A1A‐IH A1A ½", NPT(M) Bourdon 0 10 6 11.8 kg/cm2 40 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
351 999‐PI‐1706 A888 U&O 999 01 PRESSURE GAUGE Hot Naptha 3"‐P‐999‐1121‐A1A‐IH A1A ½", NPT(M) Bourdon 0 10 6 11.8 kg/cm2 60 160 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
352 999‐PI‐1708 A888 U&O 999 01 PRESSURE GAUGE Cold Naptha 4"‐P‐999‐1133‐A1A‐IH A1A ½", NPT(M) Bourdon 0 10 6 11.8 kg/cm2 60 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
353 999‐PI‐1801 A888 U&O 999 01 PRESSURE GAUGE Hot Naptha 6"‐P‐999‐1106‐A1A‐IH A1A ½", NPT(M) Bourdon 0 10 6 14 kg/cm2 60 103 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
354 999‐PI‐1802 A888 U&O 999 01 PRESSURE GAUGE Cold Naptha 4"‐P‐999‐1133‐A1A‐IH A1A ½", NPT(M) Bourdon 0 10 6 11.8 kg/cm2 40 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
355 999‐PI‐2101A A888 U&O 999 01 PRESSURE GAUGE Cooling water Supply 30"‐WCS‐999‐2102‐A93A A93A ½", NPT(M) Bourdon 0 10 4 8 kg/cm2 30‐34 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
356 999‐PI‐2103A A888 U&O 999 01 PRESSURE GAUGE Cooling water Supply 30"‐WCS‐999‐2102‐A93A A93A ½", NPT(M) Bourdon 0 10 4 8 kg/cm2 30‐34 65 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES pump discharge PG‐2 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐S
357 999‐PI‐2104 A888 U&O 999 01 PRESSURE GAUGE Cooling water RETURN 30"‐WCR‐999‐2102‐A93A A93A ½", NPT(M) Bourdon 0 6 2.7 8 kg/cm2 44 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/6‐kg/cm2‐(=)‐NH‐SG‐MP
358 999‐PISP‐0001 A888 U&O 999 01 PRESSURE GAUGE Cooling water RETURN 30"‐WCR‐999‐2102‐A93A A93A ½", NPT(M) Bourdon 0 6 2.7 8 kg/cm2 44 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/6‐kg/cm2‐(=)‐NH‐SG‐MP
359 999‐PISP‐0002 A888 U&O 999 01 PRESSURE GAUGE Cooling water Supply 30"‐WCS‐999‐2102‐A93A A93A ½", NPT(M) Bourdon 0 10 4 8 kg/cm2 30‐34 65 °C a,d shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES pump discharge PG‐2 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐GR‐NH‐SG‐MP PD1‐04‐M/F‐S
360 999‐PISP‐0003 A888 U&O 999 01 PRESSURE GAUGE Cooling water Supply 30"‐WCS‐999‐2102‐A93A A93A ½", NPT(M) Bourdon 0 10 4 8 kg/cm2 30‐34 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
361 999‐PISP‐0004 A888 U&O 999 01 PRESSURE GAUGE CRACKED FEED 6"‐P‐999‐1905‐A1A A1A ½", NPT(M) Bourdon 0 16 7.2 9.4 kg/cm2 AMB 65 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/16‐kg/cm2‐(=)‐NH‐SG‐MP
362 999‐PISP‐0005 A888 U&O 999 01 PRESSURE GAUGE Hydrogen 3"‐P‐999‐1116‐B5A B5A ½", NPT(M) Bourdon 0 40 21.5 26 kg/cm2 40 73 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES Yes PG‐1 150‐ZPS‐S‐L‐04‐L‐0/40‐kg/cm2‐(=)‐NH‐SG‐MP
363 999‐PISP‐0006 A888 U&O 999 01 PRESSURE GAUGE Hot Naptha 3"‐P‐999‐1121‐A1A‐IH A1A ½", NPT(M) Bourdon 0 10 6 11.8 kg/cm2 60 160 °C shatterproof glass IP‐65 LOCAL 150 mm White SS 304 Screwed or bayonet Yes SS 316 SS 316 SS YES PG‐1 150‐ZPS‐S‐L‐04‐L‐0/10‐kg/cm2‐(=)‐NH‐SG‐MP
11-FEB-2019
GAUTAM ANKIT SINGH (C637)
Page 27 of 27